0% found this document useful (0 votes)
191 views2 pages

Static 3-Phase Whole Current Energy Meter: (With Door Open Feature) VTX-34

The VTX-34 is a 3-phase, 4-wire whole current electronic energy meter developed for residential and commercial users. It measures active and reactive energy with accuracy classes of 1.0 and 2.0, respectively. Key features include an LCD display, energy measurement in kWh and kvarh, maximum demand calculation, and anti-tampering protection. It complies with IEC 62053 standards for metrology, reference voltage, accuracy, and other specifications.

Uploaded by

Zain Rizvi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
191 views2 pages

Static 3-Phase Whole Current Energy Meter: (With Door Open Feature) VTX-34

The VTX-34 is a 3-phase, 4-wire whole current electronic energy meter developed for residential and commercial users. It measures active and reactive energy with accuracy classes of 1.0 and 2.0, respectively. Key features include an LCD display, energy measurement in kWh and kvarh, maximum demand calculation, and anti-tampering protection. It complies with IEC 62053 standards for metrology, reference voltage, accuracy, and other specifications.

Uploaded by

Zain Rizvi
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

STATIC 3-PHASE WHOLE CURRENT

ENERGY METER
(WITH DOOR OPEN “SOLUTIONS FOR THE FUTURE”

FEATURE)
VTX-34

VTX-34 is Electronic Three Phase Four Wire Whole


Current Energy Meter developed for residential and
commercial users. This meter is developed for measure-
ment of Active and Re-active energy and also includes
maximum demand and Multi-tariff features. This model
upholds advanced Anti- Tempering features and suitable
for high power theft areas. current.

These meters comply with the


IEC 62053-21 & 62053-23 for
Accuracy Class 1.0 for active en-
ergy and Class 2.0 for re-active
energy measurement.

Vertex Electronics (Pvt.) Ltd.


Office: 190/S, Quaid-e-Azam Industrial Estate, Kot Lakhpat Lahore, Pakistan.
Works: 506 Sundar industrial Estate, Lahore, Pakistan.
Ph(s): +92-42-35215628, 35120190 Fax: +92-42-35400572
Email: info@vertex.pk, Web: www.vertex.pk
General/Electrical Specifications
 Reference Standards IEC 62053 -21 & IEC 62053-23
 Reference Specifications DDS – 60 : 2007
 Model Number VTX-34
 Connection Wiring 3-Phase, 4-Wire
 Connection Configuration Direct Connected
 Metrology Four Quadrants
 Display LCD
 Display Resolution 6 Digits
 Storage of Data Non-Volatile Memory (EEPROM)
 Supported Protocol IEC 62056-21
 Temperature Range

Features
 Eight digits (6 Digits+2 Decimals) register showing  Relative Humidity Up to 95 %
energy consumption (kWh & kvarh).  Operating Voltage 3×230/400V
 Reading Display in case of Power Outage using inter-  Basic / Max Current 10 / 100 A
nal batteries and super capacitor.  Reference Frequency 50Hz
 Fulfills IEC 62053-21 & IEC 62053-23  Accuracy Class
 Active, Reactive Energy & Power Measurement
 Power Factor
Instantaneous (by Phase & Average)  Meter Constant
Monthly Average (by Rate and Total)
 Meter body opened Indication on LCD  Starting Current Less than 40mA
 Identification and Storage of Reverse Energy Flow  Power Consumption
Event with Date/Time Stamp
 Records Energy Accurately at Low/High Voltage
 Low Battery Indication
 MDI TOD
 Impulse Output Display on LED for kWh Dielectric Strength
 Impulse Output Display on LED for kvarh
 Power Frequency 4 KV for One Minute
 Running Quadrant Display
 Impulse Voltage 8 KV: 1.2/50 Micro Sec
 IrDA / Optical Communication Port for Laptop / PC
 Short Time over Current 3000 Amperes for 10 ms
 Programming of Tariff and Seasons through PC Soft-  Insulation Resistance More than 5 Mega Ohms
ware
 Creepage Distance 20mm Minimum
 Phase Indication (A, B, C) and Indication of Load with  DC Magnetic Field 1000 Amp/Turns
Blinking Circle Around the Respective Phase on LCD
 AC Magnetic Field 400 Amp/Turns
 Display Off in case of Power Outage to Increase Bat-
tery Life. Display can be turned On by pressing Push
Buttons. Event Record
More than 28 different types of Events are recorded with Date/Time
Stamp:
Security Features  Power Outage  Under Voltage
 Phase Fail  Low Battery
 The meter is protected against any loss of data and func-
 Reverse Energy  Parameters Change
tional performance due to any external interference such
as influence of CD drive, mobile phones and complies to  Reverse Polarity  Time Change
all relevant IEC/ANSI standards.  Over Load  Resistor Reset
 The meter is protected against the influence of strong  Over Voltage
magnetic field.
 Identification and storage of reverse energy flow event
with date and time stamp.
Display of Instantaneous Quantities
 Voltages U1, U2, U3
 Each meter has a unique serial number in its memory
which can be displayed on the LCD.  Current I1 , I2 , I3
 Provides 3 Levels of Access /Security Codes.  Phase Indication A, B, C
 Meter Keeps on Operating with or without Neutral Wire.  Active Power (kW) kW1, kW2, kW3
 Over and Under Voltage Indication.  Reactive Power kvarh1, kvarh2, kvarh3
 Demand Over Load Warning  Apparent Power kVA1, kVA2, kVA3
 Power Factor PF1, PF2, PF3
 Meter Clock Date/Time
 Tariff Indication T1, T2, T3, T4
 Frequency Fr-Hz

Vertex Electronics (Pvt.) Ltd.


Office: 190/S, Quaid-e-Azam Industrial Estate, Kot Lakhpat Lahore, Pakistan.
Works: 506 Sundar industrial Estate, Lahore, Pakistan.
Ph(s): +92-42-35215628, 35120190 Fax: +92-42-35400572
Email: info@vertex.pk, Web: www.vertex.pk

You might also like