01
G200 User Manual
Asset GPS Tracker
02
Button&Indicator Light Status
Power ON/OFF Mantenga pulsado durante 3 segundos
Luz Roja-Power ; encendido fijo: completamente cargado.
Parpadeo: encendido cargando,
Luz verde-GSM Parpadeo: tarjeta SIM no reconocida.
Luz zul-GPS Encendido fijo: GPS localizado.
Specification Parameters
GSM frequency 850/900/1800/1900MHz
Dimension 76*50*30mm
Tracking method GPS(outdoor)+LBS(indoor)
Backup battery Rechargeable 3.6V/6000mAh
Working Temp. -20°C to +65°C
Preparation
Inserte la nano Simcard (2G con GPRS activado), asegúrese de que se
haya eliminado el código PIN.
Cuando lo use por primera vez, mueva el dispositivo al exterior con una mejor
señal de GPS, lo que ayudaría a que el GPS del dispositivo se arregle rápidamente.
Asegúrese de insertar la tarjeta SIM correctamente y GPRS activado,
configure APN correctamente.
03
SIM Card Slot
USB Port
Mic Hole Blue GPS Green GSM Red Power
Notes
Las luces se apagarán automáticamente alrededor de 3 minutos
después de que el dispositivo funcione normalmente. Una llamada
al dispositivo puede volver a encender las luces.
04
Start to Use
Functions SMS Command SMS example
★ Please don’t type “+” “space”, default password 123456.
★ Central Number need to be set to receive all alarms message, no need to input country code.
★ Voice listen: use phone to make call to device number.
adminip+password+space+IP Address+space+port adminip123456
Step 1 Set IP Port
number www.gps228.com 8989
apn123456+space+LocalApn+space+ApnName+s
Step 2 Set APN apn123456 tim.br tim tim
pace+ApnPassword
Get Google link smslink123456
Set fall-off alarm remove123456+space+1 remove123456
Cancel fall-off alarm remove123456+space+0 remove123456 0
If 60s , send SMS: ITV123456
Set Short time interval ITV123456+space+time interval(s)
60
Set central number centernum123456+space+phone number centernum123456 13712345678
Set low battery alarm lowbat123456+space+1 lowbat123456 1
Cancel low battery lowbat123456+space+0 lowbat123456 0
Set time zone timezone123456+space+(timezone*60) If+5.5:timezone123456 330
Check device status check123456 check GPS GSM status
Voice listen mode monitor123456 Must set central number first
Activate vibrate alarm vibrate123456+space+1 Must keep continuously static 3
Cancel vibrate alarm vibrate123456+space+0 mins before vibration
Initialize factory begin123456 Erase all settings to factory mode
Fall-off alarm: device sticking to the metal cover due to the magnet, fall-off alarm will be triggered once
device removed off.
05
Switch working mode via SMS/APP
Mode 0: Real time tracking mode, SMS command
“slp123456+space+0”
Remark: Device will update location at every 1 minute, battery consumes
fast.
Mode 1: Default smart power-saving mode, SMS command
“slp123456+space+1”
Remark: device is working based on vibration status.
When moving, device will update location;
When not moving device will stop updating location, and keep online
status with showing last location and date. User can send SMS command
“EXTSLP123456” wakeup device for short time.
Mode 2: Deeply sleep mode, SMS command
“slp123456+space+2”
Remark: device is working based on vibration status.
When moving , device will update location;
When not moving device will stop updating location, Device will enter
deeply sleep after sending the command, it will show offline status and
never update location. User can send SMS command “EXTSLP123456”
wakeup device for short time.
GPS Tracking System www.secumore1818.com
Android & IOS APP name: secumore1
Default IMEI login, password 123456.
Change “License Plate” on APP Steps:
1. Click “More” >> Click “Device Info” >> “License Plate”
2. You can change any user name to replace IMEI user name.
