2010 - 570 RTS 27-41ft

Assembly and Parts Manual

 570 27-41ft RTS & RTS XT Assembly and Parts Manual

Table of Contents
Salford Recommended Torque Values..........................................................................................................5
Torque and Pressure Values for Tires............................................................................................................6
General Safety Precautions...........................................................................................................................8
Salford and HDM Wing Fold Cuylinder Identification Guide....................................................................11
Decal Locations..........................................................................................................................................12
Frame
Main Frame Assembly................................................................................................................................16
Wing Fold Cylinder Installation.................................................................................................................18
5th Bar Installation......................................................................................................................................20
Self Levelling and Depth Control...............................................................................................................22
Tongue Installation......................................................................................................................................24
Telescope Mount Hose Holder....................................................................................................................27
Axles
27ft., 30ft. Axle Layout...............................................................................................................................28
36ft., 41ft. Axle Layout...............................................................................................................................29
10000lb Main Frame Axle Installation (27ft., 30 ft.)..................................................................................30
10000lb Main Frame Axle Installation (27ft., 30 ft.)..................................................................................31
14000lb Main Frame Axle Installation (36ft., 41ft.)...................................................................................32
10000lb Axle Assembly (27ft., 30ft.) ........................................................................................................34
10000lb Axle Assembly (27ft., 30ft.) ........................................................................................................35
14000lb Tandem Axle Assembly................................................................................................................36
5000lb Wing Frame Axle Installation.........................................................................................................38
5000lb Axle Assembly................................................................................................................................40
5000lb Axle Assembly................................................................................................................................42
5000lb Axle Assembly................................................................................................................................43
4000lb Hub & Spindle Assembly...............................................................................................................44
8000lb Hub & Spindle Assembly...............................................................................................................46
Coulter Assembly
Wavy Coulter & Mounts.............................................................................................................................48
Wavy Coulter & Mounts.............................................................................................................................49
Coil-Tech Hub.............................................................................................................................................50
Harrow Assembly
Harrow Setup..............................................................................................................................................52
Tine Performance Settings..........................................................................................................................53
62” Arm Assembly......................................................................................................................................54
1/2” Tine Harrow Assembly.......................................................................................................................56
14” Roller Parts...........................................................................................................................................58

Salford Farm Machinery Ltd. 04-2011

 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

Coulter & Harrow Layouts

27ft Coulter Layout.....................................................................................................................................60
27ft Harrow Layout.....................................................................................................................................62
30ft Coulter Layout.....................................................................................................................................63
30ft Harrow Layout.....................................................................................................................................65
36ft Coulter Layout.....................................................................................................................................66
36ft Harrow Layout.....................................................................................................................................68
41ft Coulter Layout.....................................................................................................................................69
41ft Harrow Layout.....................................................................................................................................71
Hydraulics & Lights
27’-30’ Wing Fold Hydraulics....................................................................................................................72
36’-41’ Wing Fold Hydraulics....................................................................................................................74
Axle Lift Hydraulics...................................................................................................................................76
Light Installation.........................................................................................................................................78
Slow Moving Vehicle Sign and Rear Parking Stand..................................................................................80
Transport Lock............................................................................................................................................81
Grease Bank................................................................................................................................................82
Tow Hitch Installation (27ft. - 30ft.)...........................................................................................................84
Tow Hitch Installation (36ft. - 41ft.)...........................................................................................................85
Tow Hitch Hydraulics (Independent or Shared).........................................................................................86

04-2011 Salford Farm Machinery Ltd. Page 3

Return to Contents 570 27-41ft RTS & RTS XT Assembly and Parts Manual

Notes

Page 4 Salford Farm Machinery Ltd. 04-2011

 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

6$/)25'5(&200(1'('72548(9$/8(6
Salford Recommended Torque Values

*5$'( *5$'( *5$'(

%2/76,=(
IWOEV 1P IWOEV 1P IWOEV 1P
1&      
1&      
1&      
1&      
1&      

127(67KHVHUHFRPPHQGHGWRUTXHYDOXHVDUHDSSOLFDEOHZKHQDSSOLHGWRWKHQXW
RQO\7KHVHUHFRPPHQGHGWRUTXHYDOXHVDUHDSSUR[LPDWHRQO\7KHWRUTXHWHQVLRQ
UHODWLRQVKLSLVDIIHFWHGE\OXEULFDWLRQVXUIDFHILQLVKWKUHDGILWSODWLQJORFNZDVKHUVHWF
'2127XVHWKHVHYDOXHVLIDGLIIHUHQWWRUTXHYDOXHRUWLJKWHQLQJSURFHGXUHLVJLYHQIRU
DVSHFLILFDSSOLFDWLRQ7RUTXHYDOXHVOLVWHGDUHIRUJHQHUDOXVHRQO\&KHFNWLJKWQHVVRI
IDVWHQHUVSHULRGLFDOO\
6KHDUEROWVDUHGHVLJQHGWRIDLOXQGHUSUHGHWHUPLQHGORDGV$OZD\VUHSODFHVKHDUEROWV
ZLWKLGHQWLFDOJUDGH
)DVWHQHUVVKRXOGEHUHSODFHGZLWKWKHVDPHRUKLJKHUJUDGH,IKLJKHUJUDGHIDVWHQHUV
DUHXVHGWKHVHVKRXOGRQO\EHWLJKWHQHGWRWKHVWUHQJWKRIWKHRULJLQDO
0DNHVXUHIDVWHQHUVWKUHDGVDUHFOHDQDQGWKDW\RXSURSHUO\VWDUWWKUHDGHQJDJHPHQW
7KLVZLOOSUHYHQWWKHPIURPIDLOLQJZKHQWLJKWHQLQJ

:$51,1* %RWKVLGHVRIWKHXEROW
'RQRWWLJKWHQRQHVLGHRIWKH PXVWEHWLJKWHQHGHTXDOO\
XEROWEHIRUHWKHRWKHUVLGH

04-2011 Salford Farm Machinery Ltd. Page 5

Return to Contents 570 27-41ft RTS & RTS XT Assembly and Parts Manual

Torque and Pressure Values for Tires

WARNING - Maintain proper torque to provide safe and secure

attachment of the wheel the hub/drum. Improperly tightened wheel nuts can
cause the wheel to separate from the wheel mounting surface during operation.
This could result in property damage, serious personal injury, or possibly
scenario loss of life.

NOTE - if wheel does not have chamfers to match profile of the nuts – use flat side of
nuts against rim face.

Install all lug nuts/bolts by hand to prevent cross threading and tighten lug nuts/bolts
following the steps and tightening sequence diagram below.
STEP 1. Torque to 20-25 ft/lbs of torque.
STEP 2. Torque to 55-60 ft/lbs.
STEP 3. Torque bolts/nuts to the final ft. lb rating (see bolt size below)

Bolt Size (Hub Size) Final Torque

1/2" dia. bolt (up to 3000 lb hubs) 85 ft. lbs
9/16" dia. bolt (4000 - 6500 lb hubs) 120 ft. lbs
5/8" dia. bolt (8000 - 12,000 lb hubs) 170 ft. lbs
3/4" dia. bolt (16,000 - 20,000 lb hubs) 300 ft. lbs
7/8" dia. bolt (25,000 lb hubs) 450-500 ft. lbs

Lug Nut/Bolt Tightening Sequence

NOTE - Recheck the torque settings of lug nuts/bolts after 10 km (6 miles) and again
after 50 km (30 miles). Periodically and at the beginning of each season check the
condition and the torque of the lug nuts/bolts.

Page 6 Salford Farm Machinery Ltd. 04-2011

 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

Tire Pressure
Ensure proper inflation of each tire for safe operation and extended tire life.

Pressure Tire Size

35 psi Load Range C
65 psi Load Range D
Load Range F
Truck Tires - 245/70R19-5
90 psi
- 305/70R22-5
- 425/60R22-5

NOTE - Periodically and at the beginning of each season check the condition and
pressure of each tire.

04-2011 Salford Farm Machinery Ltd. Page 7

Return to Contents 570 27-41ft RTS & RTS XT Assembly and Parts Manual

General Safety Precautions

Signal Words
The words DANGER, WARNING or CAUTION are
used with the safety alert symbol. Learn to
recognize the safety alerts, and follow the
recommended precautions and safe practices.

Three words are used in conjunction with the safety-alert symbol:

DANGER Indicates an imminently hazardous situation that, if not

avoided, will cause DEATH OR VERY SERIOUS INJURY.

WARNING Indicates a potentially hazardous situation that, if not

avoided, could cause DEATH OR SERIOUS INJURY.

CAUTION Indicates a potentially hazardous situation that, if not

avoided, may result in MINOR or MODERATE INJURY.

Replace any DANGER, WARNING, CAUTION or

instructional decal that is not readable or is missing.
The location and par t number of these
decals is identified later in this section of the
manual.
The words Important and Note are not related to
personal safety but are used to give
additional information and tips for
operating or servicing this equipment.
IMPORTANT: Identifies specia l instructions or
pr oc edur es whic h, if not s tric tl y
observed could result in damage to, or
destruction of the machine, process or
its surroundings.
NOTE: Indicates points of particular interest for more efficient and convenient repair or operation.

A CAREFUL OPERATOR IS THE BEST INSURANCE AGAINST AN ACCIDENT !

Page 8 Salford Farm Machinery Ltd. 04-2011

 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

General Safety Precautions

DANGER

 Wings may fall rapidly

causing injury.
 Always stay clear of wings
when being lowered, raised
or in a elevated state.
 Always use lockup device
provided when raised.
 Ensure cylinder is completely
filled with hydraulic fluid to
avoid unexpected
movement.

DANGER
Hydraulics
• DO NOT search for high pressure hydraulic
leaks without hand and face protection. A
tiny, almost invisible leak can penetrate skin,
thereby requiring immediate medical
attention.
• Use cardboard or wood to detect leaks – never
your hands.
• Double check that all is clear before
operating hydraulics.
• Never remove hydraulic hoses or ends
with machine elevated. Relieve hydraulic
pressure before disconnecting hydraulic
hoses or ends.
• Maintain proper hydraulic fluid levels.
• Keep all connectors clean for positive connections.
• Ensure all fittings and hoses are in good condition.
• Do not stand under wings.
General O

04-2011 Salford Farm Machinery Ltd. Page 9

Return to Contents 570 27-41ft RTS & RTS XT Assembly and Parts Manual

Page 10 Salford Farm Machinery Ltd. 04-2011

 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents
SALFORD AND HDM WING FOLD CYLINDER IDENTIFICATION GUIDE
Salford and HDM Wing Fold Cuylinder Identification Guide

HDM CYLINDERS – HS3524A AND HS3536A*

WELDED
ENDCAP

PORTS WELDED
TO BARREL

WELDED ROD END

*Present on all machines with ‘ML’ suffixed serial numbers beginning with 092501ML

SALFORD CYLINDERS – HS3524 AND HS3536

THREADED
ENDCAP

PORTS
MACHINED IN
GLAND AND
ENDCAP

THREADED
ROD END

04-2011 Salford Farm Machinery Ltd. Page 11

Return to Contents 570 27-41ft RTS & RTS XT Assembly and Parts Manual

RTS DECAL INSTALLATION

ALL MACHINES
ITEM QTY. DESCRIPTION
GD102 2 LARGE SALFORD LOGO WITH WEBSITE
GD103 2 RTS MACHINE DECAL
GD112 1 ATTENTION: LUBRICATE ALL GREASE FITTING AS PER OPERATOR MANUAL
GDSW700 1 WARNING: HIGH PRESSURE FLUID HAZARD
GDSW4 1 CAUTION: LIST OF 13 SAFETY FEATURES
GDSW2 2 CAUTION: TO AVOID INJURY OR MACHINE DAMAGE
GD193 2 11L X 15’ TIRE CAUTION DECAL
GDSW115 1 IMPORTANT - AVOID EXCESSIVE DEPTH AND COULTER WHIP
GDSW116 1 IMPORTANT - DO NOT EXCEED THE MAXIMUM TILT
GD208 1 1'' x 2 1/2'' RTS PATENT # US 2006/0048953 A1
GD207 1 *RTS-XT ONLY* 1'' x 2 1/2'' PATENT PENDING DECAL

8FT – 16FT NO-FOLD MACHINES

ITEM QTY. DESCRIPTION
GD100 6 LARGE SALFORD LOGO
GD10840 8 40 HOUR GREASE DECAL
GD193 2 11L X 15’ TIRE CAUTION DECAL

16FT SINGLE-FOLD MACHINES

ITEM QTY. DESCRIPTION
GD100 9 LARGE SALFORD LOGO
GD10840 12 40 HOUR GREASE DECAL
GD111 2 DANGER: STAY CLEAR WHEN FOLDING/UNFOLDING WINGS
GDSW200 2 WARNING: OVERHEAD WING HAZARD
GD110 1 WARNING: DO NOT LIFT WINGS UNTIL LINES FULL OF OIL AND FREE OF AIR
GD193 2 11L X 15’ TIRE CAUTION DECAL

18-30/36-41’ SINGLE SOLD MACHINES

ITEM QTY. DESCRIPTION
GD100 12 LARGE SALFORD LOGO
GD10840 14 40 HOUR GREASE DECAL
GD111 2 DANGER: STAY CLEAR WHEN FOLDING/UNFOLDING WINGS
GDSW200 2 WARNING: OVERHEAD WING HAZARD
GD110 1 WARNING: DO NOT LIFT WINGS UNTIL LINES FULL OF OIL AND FREE OF AIR
GD144 2 570 WING LOCK
GD193 4/2 11L X 15’ TIRE CAUTION DECAL
GD194 0/2 12.5L X 15’ TIRE CAUTION DECAL

41’-50’ BI-FOLD MACHINES

ITEM QTY. DESCRIPTION
GD100 16 LARGE SALFORD LOGO
GD10840 20 40 HOUR GREASE DECAL
GD111 2 DANGER: STAY CLEAR WHEN FOLDING/UNFOLDING WINGS
GDSW200 2 WARNING: OVERHEAD WING HAZARD
GD110 1 WARNING: DO NOT LIFT WINGS UNTIL LINES FULL OF OIL AND FREE OF AIR
GD144 2 570 WING LOCK
GD193 2 11L X 15’ TIRE CAUTION DECAL
GD194 4 12.5L X 15’ TIRE CAUTION DECAL

Page 12 Salford Farm Machinery Ltd. 04-2011

04-2011
SALFORD LOGO
27-41FT Folded
AND MODEL Side View (16FT
Flat-fold included)
DECAL
LOCATIONS Ensure the tongue-mounted
decals are located such that
they will not be interfered
with by tractor tires

12-24FT Folded
Side View

Salford Farm Machinery Ltd.

570 27-41ft RTS & RTS XT Assembly and Parts Manual

(different locations depending

on working width)
Return to Contents

Page 13
 Page 14
SALFORD
Return to Contents

SAFETY
DECAL
LOCATIONS Mainframe Axle Tower
(Wing Axle Towers exclude
the “DANGER” decal)

Hose Holder Decal

Placement

Salford Farm Machinery Ltd.

RTS-XT
12FT machine does not Place Serial No. ONLY
require this decal Plate between
570 27-41ft RTS & RTS XT Assembly and Parts Manual

Place Below
Serial No. Plate

36FT- 12FT- 12FT- 36FT-

41FT 30FT 30FT 41FT

12FT machine does not

require this decal

04-2011
 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

sides of Upper Telescope

Grease Decals on both
Mount two 40 Hour
LOCATIONS
SALFORD
GREASE
DECAL

04-2011 Salford Farm Machinery Ltd. Page 15

Return to Contents 570 27-41ft RTS & RTS XT Assembly and Parts Manual

FRAME
Main ASSEMBLY
Frame Assembly

1.50
8 1/4"

2
1
4

Page 16 Salford Farm Machinery Ltd. 04-2011

 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

Main
RTS WING FrameINSTALLATION
FRAME Assembly
ITEM NO. QTY. PART NO. DESCRIPTION
1 4 GPH2400814F 1 1/2" x 8 1/4" LG. HARD PLATE PIN
2 4 BL10 5/8" LOCKWASHER
3 4 B1015 5/8 X 1 1/2" PLATED BOLT
4 4 GF1610 1/8" NPT GREASE FITTING
5 8 GBB175150200 1 3/4" x 1 1/2" x 2" LG. HARD BUSHING

SECURE FRAMES AT LEAST 39" ABOVE THE GROUND

CAUTION: OIL ON FRAMES IS VERY SLIPPERY, ESPECIALLY ON NEW PAINT.
CLEAN SPILLS IMMEDIATLY TO AVOID A PAINFUL FALL.

HINGE PIN INSTALLATION

MAKE SURE GREASE NIPPLE IS IN PLACE AND WILL ACCEPT GREASE.
1-SECURE FRAMES AT LEAST 39 inches OFF THE GROUND
2-ALIGN PIN HOLES, INSERT PIN #1 (1 1/2 X 7 1/2" WITH PLATE)
3- FASTEN WITH 5/8X1-1/2" BOLT AND LOCKWASHER.

04-2011 Salford Farm Machinery Ltd. Page 17

Return to Contents 570 27-41ft RTS & RTS XT Assembly and Parts Manual

Wing Fold Cylinder Installation

Refer to hydraulic
layout for cylinder sizes
5
4

2
1

Install cylinders with

ports facing inwards

CAUTION
When installing pins, washers must be
installed, major damage and or serious
injuries or death may occur if washers
are not installed properly.

Page 18 Salford Farm Machinery Ltd. 04-2011

 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

Wing Fold Cylinder Installation

ITEM QTY PART DESCRIPTION

NO. NUMBER
1 4 GP16005A05 PIN 1" DIA. x 5" LG. - 2 HOLES
2 8 BF16S 1" SAE WASHER
3 8 BSC0515 5/16" x 1 1/2" COTTER PIN
4 4 GP1600314H04 PIN 1" DIA. x 3 1/4" LG. WITH HEAD
5 4 BSC0415 1/4" x 1 1/2" COTTER PIN

CAUTION
!!!DO NOT install pins in rods ends until ALL AIR has been purged out of the
wing folding hydraulic circuit. See hydraulic layout for instructions.
When installing pins, washers must be installed, major damage and or
serious injuries or death may occur if washers are not installed.

See *Cylinder Series Identification Guide* page for details on

types of wingfold cylinders

04-2011 Salford Farm Machinery Ltd. Page 19

Return to Contents 570 27-41ft RTS & RTS XT Assembly and Parts Manual

5th Bar Installation

6
11 10

9 8
1

9 4

7 3
2 5
12
ONLY FOR: 8
36' AND 41' MODELS 9

Page 20 Salford Farm Machinery Ltd. 04-2011

 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

5th Bar Installation

SEE COULTER LAYOUTS FOR 5TH BAR LOCATION

04-2011 Salford Farm Machinery Ltd. Page 21

Return to Contents 570 27-41ft RTS & RTS XT Assembly and Parts Manual

Self Levelling and Depth Control

Washer of the depth
control rod 26 is shared
with cylinder rod pin

24

23

IMPORTANT
Tighten both sides equally,
DO NOT OVERTIGHTEN!!!
BRACKET WILL BEND!!!

29 18 17
POPPET Install with boss
facing mounting plate
29
OUTLET OUTLET 30
18

30
INLET
30
8 4 3

14

31

13

5
23
6
31 22 26
28
25
12 11 10 15 16 1 19
27
2 20 21 4

Page 22 Salford Farm Machinery Ltd. 04-2011

 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

Self Levelling and Depth Control

ITEM NO. QTY PART NUMBER DESCRIPTION

1 1 C10575 550/570/699/700 TRIPOD TOWER
+ 2
3
1
4
C10757
B1025
570/700 TRIPOD TOWER
5/8 x 2 1/2" HEX BOLT GR 5
4 6 BN10L 5/8" NYLOCK NUT NC
5 1 C10784 550/570/699/700 SELF-LEVELING PIVOT
+++ 6
7
1
1
C10777
GP2401514A09
SELF-LEVELING PIVOT - RTS 44 & 50'
PIN 1 1/2" DIA. x 15 1/4" LG. - 2 HOLES
8 2 B0830 1/2" x 3" HEX BOLT
9 2 BN08L 1/2" NYLOCK NUT NC
++ 10
11
2
2
HSR40095
HSR35095
4" BORE x 9 1/2" STROKE HYD. CYLINDER
3 1/2" BORE x 12" STROKE HYD. CYLINDER
+++ 12 2 HSR4012-TRI 4" BORE x 12" STROKE HYD. CYLINDER
13 1 GP20010A05 1 1/4" DIA. x 10 1/4" LG - 2 HOLE
14 2 BSC0520 5/16" x 2" COTTER PIN
15 2 GPHF1600338H04 1" x 3 3/8" SHOULDER PIN HARDENED W/FLATS
16 2 BSC0415 1/4" x 1 1/2" COTTER PIN
17 1 C10668 570 TRIPOD BRACE
18 2 GP16006A05 1"DIA. x 6" LG 2 HOLE PIN
19 1 D10011A 1/2 X 2 FB-11 3/4 LG: POPPET VALVE BRACKET 38°
+++ 20
21
1
1
D10011B
BU1046
1/2 X 2 FB-11 3/4 LG: POPPET VALVE BRACKET 34°
U-BOLT 5/8" x 4" x 7 1/2" LG.
22 1 HPMSC10 STROKE CONTROL VALVE
23 2 B0525 5/16"NC x 2 1/2" HEX BOLT
24 2 BN05L 5/16" LOCK NUT
25 1 C1008 DETENT ADJUSTABLE STOP
26 1 C10667 570 DEPTH CONTROL ROD
+++ 27 1 C10907 50' RTS DEPTH CTRL ROD - 42" WITH CLEVIS
28 2 GBB175150200 1 3/4" x 1 1/2" x 2" LG. HARD BUSHING
29 4 BSC0515 5/16" x 1 1/2" COTTER PIN
30 4 GM26 1" MACHINE BUSHING
31 2 GM30 1 1/4" MACHINE BUSHING

+ 50FT MACHINE ONLY

++ 36/41FT 3 PC & 41FT 5 PC NON HDXT MACHINES
+++ 36/41FT 3 PC & 41FT 5 PC HDXT AND 50FT HDXT/STND MACHINES

04-2011 Salford Farm Machinery Ltd. Page 23

 Page 24
CHAIN RING AROUND
18 17
PIN 11
10
Return to Contents

15

12

USE WASHERS AS
1 24 SHIMS TO TAKE UP
CLEARANCE BETWEEN
TONGUE AND CLEVIS
31
23

9 13

14 16
33

Salford Farm Machinery Ltd.

11
TONGUE INSTALLATION
Tongue Installation

2 32
570 27-41ft RTS & RTS XT Assembly and Parts Manual

20
28 29
5 27

19 25
26
7
6 21
22 Torque 20 & 22
to 220-250 ft/lbs

04-2011
 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

TONGUE INSTALLATION
Tongue Installation

ITEM QTY PART DESCRIPTION

NO. NUMBER
1 1 2225C 550-570-580 CAST CLEVIS TONGUE
2 1 A60041 570-580-860-870-9700 INNER TELESCOPE
3 1 A60042 80" OUTER TELESCOPE
4 1 A50010 TURNBUCKLE
5 1 PPI-30XL CAT #3 CAST CLEVIS
6 1 PPI-208VR CLEVIS FOR CAT 3 HITCH
7 1 PPI-42XL CAT 4 CAST IRON HITCH
8 1 GJ652027 20,000 LB SAFETY CHAIN
9 1 GP100414C03 5/8'' dia x 4 1/4'' pin RING & WASHER
10 1 GP2000612B06 1 1/4" x 6 1/2" LG. PIN - 1 HOLE
11 1 GP1600512A05 PIN 1" DIA. x 5 1/2" LG. - 2 HOLES
12 2 GP1600258H04 PIN 1" DIA. x 2 5/8" LG. WITH HEAD
13 2 GPSPEC24080 1 1/2" x 8 1/4" LG. WING HINGE PIN
14 2 BSC0515 5/16" x 1 1/2" COTTER PIN
15 2 BSC0415 1/4" x 1 1/2" COTTER PIN
16 1 GHP11 #11 HAIR PIN
17 1 BN06L 3/8"-16NC LOCK NUT
18 1 B0625 3/8" X 2 1/2" LG. GRADE 5
19 2 BF16S 1" SAE WASHER
20 1 B1255H 3/4" x 5 1/5" HEX BOLT GR. 8
21 1 BF12HS 3/4" HARD STRUCTURAL WASHER
22 1 BN12S 3/4" STOVER LOCK NUT
23 2 B1015 5/8"NC x 1 1/2" HEX BOLT
24 2 BL10 5/8" LOCKWASHER
25 4 BF16 1" FLAT WASHER
26 2 B1680H 1" x 8" NC HEX BOLT GR. 8
27 2 BN16L 1-8 NC NYLOCK NUT
28 1 GJ8002 8000 LB TONGUE JACK
29 1 GJ5000S 5000lb JACK WITH ROUND MOUNT
30 1 A60096A TELESCOPE MOUNT HOSE HOLDER ASSEMBLY
31 2 BU0830 1/2" x 3" x 4 1/2" U-BOLT
32 4 BF08HS 1/2" HARD STRUCTURAL FLAT WASHER
33 4 BN08L 1/2" NYLOCK NUT NC

NOTE: FOR MACHINES UNDER 30FT USE GJ5000 (29)

FOR MACHINES 36FT AND OVER USE GJ8002 (28)

04-2011 Salford Farm Machinery Ltd. Page 25

Return to Contents 570 27-41ft RTS & RTS XT Assembly and Parts Manual

Page 26 Salford Farm Machinery Ltd. 04-2011

 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

TelescopeMOUNT
TELESCOPE Mount Hose
HOSEHolder
HOLDER
ITEM NO. QTY. PART NO. DESCRIPTION
1 1 A60096 TELESCOPE MOUNT OPERATOR STATION
2 1 G106 HD OPERATORS MANUAL HOLDER
3 1 GL11750 COLE HERSEE LIGHT PLUG HOLDER
4 4 P0160B HOSE CLAMP 4"
5 2 BC0630 3/8"NC x 3" LG. CARRIAGE BOLT
6 2 BN06L 3/8"-16NC LOCK NUT
7 2 BF04 1/4" FLATWASHER
8 5 BC0205 10-24 x 1/2" A307A LOW CARBON ZINC CARRIAGE BOLT
9 5 BN02 #10-24 HEX NUT

4 4 6

NOTE: EXTRA #4 CLAMPS INSTALLED

ON MACHINES REQUIRING MORE
THAN TWO SETS OF HOSES

7 5

04-2011 Salford Farm Machinery Ltd. Page 27

Return to Contents 570 27-41ft RTS & RTS XT Assembly and Parts Manual

27ft.,
27, 30ft.
30FT. AXLEAxleLAYOUT
Layout

WING AXLE
*HSR3208 CYLINDER
*5000LB PIVOT HUB
*4000LB WHEEL HUBS In this book, all reference to RH or LH
*11L X 15SL TIRES assume the operator is behind the
LOAD RANGE 'D' machine (as shown here)

LH WING
Right or Left hand? The
cylinder lug faces up

MAIN AXLE
*HSR3508 CYLINDER
CENTER

FRONT

*10,000LB PIVOT HUB

*5000LB WHEEL HUBS
*11L X 15FL TIRES
'HIGHWAY SERVICE'
LOAD RANGE 'F'

HUB TERMINOLOGY
PIVOT
HUB
RH WING

WHEEL
.
HUB

WING AXLE
*HSR3208 CYLINDER
*5000LB PIVOT HUB
*4000LB WHEEL HUBS
*11L X 15SL TIRES
LOAD RANGE 'D'

Page 28 Salford Farm Machinery Ltd. 04-2011

 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

36ft., 41ft. Axle Layout

In this book, all references to Right or Left assume the
operator is standing behind the machine looking forward.

WING AXLES
•HSR3708 CYLINDER or

LEFT WING
•HSR3708B CYLINDER
•5000LB PIVOT HUB
•4000LB WHEEL HUBS
•11L X 15SL TIRES 6-BOLT
LOAD RANGE 'D'
•OPTIONAL
245/70R19.5 6-BOLT TIRE

See axle intsallation

page for further detail
of axle assemblies

MAIN AXLES
•HSR4008 CYLINDER or
•HSR4008B CYLINDER

CENTER FRAME
•14000LB PIVOT HUB
•8000LB WHEEL HUBS

FRONT
•305/70 R22.5 TIRES 8-BOLT
HIGHWAY SERVICE
LOAD RANGE 'H'
•OPTIONAL
12.5 X 15 TIRES 8-BOLT
HIGHWAY SERVICE
LOAD RANGE 'F'

WING AXLES
•HSR3708 CYLINDER or
•HSR3708B CYLINDER
RIGHT WING

•5000LB PIVOT HUB

•4000LB WHEEL HUBS
•11L X 15SL TIRES 6-BOLT
LOAD RANGE 'D'
•OPTIONAL
245/70R19.5 6-BOLT TIRE

04-2011 Salford Farm Machinery Ltd. Page 29

 Page 30
TOWER BRACE REFERENCE TABLE
Return to Contents

MACHINE SIZE PART # DESCRIPTION INTIAL SETTING

580 MAINFRAME 40'
A60031 50" TUBE LENGTH 63" PIN TO PIN LENGTH
550 C-SHANK 38' - 40'
550 S-TINE 38' - 40' A60036 53" TUBE LENGTH 65" PIN TO PIN LENGTH

7
11 22 21

15 24 14 23 29

9
SEE TABLE
FOR LENGTH

10

Salford Farm Machinery Ltd.

26 12 27
16 24
570 27-41ft RTS & RTS XT Assembly and Parts Manual

13 8 20 18 28
19 25
REFER TO HYDRAULIC
LAYOUT FOR CYLINDER SIZE

17 24
10000lb Main Frame Axle Installation (27ft., 30 ft.)

LH SHOWN, RH SIMILAR
22 21 11
2 3 4 5 6
FOR ORDERING PARTS
SEE AXLE ASSEMBLY

04-2011
 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

10000lb Main Frame Axle Installation (27ft., 30 ft.)

ITEM QTY PART NUMBER DESCRIPTION
NO.
1 2 C10013 MAIN FRAME TOWER
2 1 C00139L 10,000 LB S-TINE MAIN AXLE ASSEMBLY - LH
3 1 C00139R 10,000 LB S-TINE MAIN AXLE ASSEMBLY - RH
4 1 C00130L 10000 LB AXLE ASSEMBLY - LH
5 1 C00130R 10000 LB AXLE ASSEMBLY - RH
6 4 GW5000A 5000 LB HUB AND SPINDLE ASSEMBLY
7 1 SEE TABLE ON PREVIOUS PAGE
8 2 GPH2401312F 1 1/2" x 13 7/8" LG. AXLE PIN - HARDENED
9 2 C50010 TRANSPORT LOCK ASSEMBLY
10 2 C10716 570 MAINFRAME TURNBUCKLE LOCK
11 4 GP2000512A05 1 1/4" x 5 1/2" PIN - 2 HOLES
12 2 GP1600414C04 RING & WASHER WING LOCK PIN
13 2 GHP9 #9 HAIR PIN
14 2 GP1600512A05 PIN 1" DIA. x 5 1/2" LG. - 2 HOLES
15 2 GPHF1600314H04 1" x 3 1/4" SHOULDER PIN HARDENED W/FLATS
16 2 GP1600314H04 PIN 1" DIA. x 3 1/4" LG. WITH HEAD
17 2 GP1600258H04 PIN 1" DIA. x 2 5/8" LG. WITH HEAD
18 2 B1015 5/8 X 1 1/2" PLATED BOLT
19 4 B1040 5/8"NC x 4" LG. HEX BOLT
20 2 BL10 5/8" LOCKWASHER
21 8 GM30 1 1/4" MACHINE BUSHING
22 8 BSC0520 5/16" x 2" COTTER PIN
23 4 BSC0515 5/16" x 1 1/2" COTTER PIN
24 6 BSC0415 1/4" x 1 1/2" COTTER PIN
25 4 BN10L 5/8" NYLOCK NUT NC
26 4 GBB175150200 1 3/4" x 1 1/2" x 2" LG. HARD BUSHING
27 2 GBB175150062 1 3/4" x 1 1/2" x 5/8" LG. HARD BUSHING
28 4 GBB175150100 1 3/4" x 1 1/2" x 1" LG. HARD BUSHING
29 4 BF16S 1" SAE WASHER

Connect hoses and charge lift axle cylinders with fluid

CAUTION following the procedure in the axle lift hydraulics section of
this manual before connecting rod ends of the cylinders.

CAUTION: Torque lug nuts according to decal

on axle tower or tire torque page in manual.

04-2011 Salford Farm Machinery Ltd. Page 31

 Page 32
REFER TO HYDRAULIC
NOTE: FOR INCREASED TRANSPORT SCHEMATIC FOR CYLINDER SIZES
Return to Contents

CLEARANCE ON CROWNED ROADS,

CLOSE TURNBUCKLES TO 1/4" THREAD 24 14 27
9 15
EACH END. ADJUST WING
TURNBUCKLES ACCORDINGLY.

4
L-PIN NOT NEEDED 7 8
FOR TURNBUCKLE
LOCKS ON MAINFRAME 3
6 13 14
19

53" INTIAL
SETTING PIN 5
TO PIN ON
26
TURNBUCKLE
COMPLETE ASSEMBLY
2 1
20

23 22 21

Salford Farm Machinery Ltd.

9 15
10 15 25 11 12
570 27-41ft RTS & RTS XT Assembly and Parts Manual

(305/70R22.5 TIRES - STANDARD,

16

17 18 LH SHOWN, RH SIMILAR
12.5L X 15 LOAD RANGE "F" TIRES - OPTIONAL)
14000 LB SHROT TANDEM AXLE ASSEMBLY
14000lb Main Frame Axle Installation (36ft., 41ft.)

USE THIS HOLE ON

14 13 6 BOTH SPINDLES

04-2011
 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

14000lb Main Frame Axle Installation (36ft., 41ft.)

14000 LB RTS MAINFRAME AXLE INSTALLATION
(305/70 R22.5 TIRES - STANDARD,
12.5LX15 LOAD RANGE "F" - OPTIONAL)

ITEM QTY PART NUMBER DESCRIPTION

NO.
1 1 C00146L 14,000 LB SHORT TANDEM AXLE ASSEMBLY LH
2 1 C00146R 14,000 LB SHORT TANDEM AXLE ASSEMBLY RH
3 2 C10013 MAIN FRAME TOWER
4 2 A60032 2 1/2" TURNBUCKLE 40" TUBE
5 1 C50010 TRANSPORT LOCK ASSEMBLY
6 4 GP2000512A05 1 1/4" x 5 1/2" PIN - 2 HOLES
7 2 GP1600414C04 RING & WASHER WING LOCK PIN
8 2 GHP9 #9 HAIR PIN
9 4 GPHF1600338H04 1" x 3 3/8" SHOULDER PIN HARDENED W/FLATS
10 2 GP1600258H04 PIN 1" DIA. x 2 5/8" LG. WITH HEAD
11 2 B1015 5/8 X 1 1/2" PLATED BOLT
12 2 BL10 5/8" LOCKWASHER
13 8 GM30 1 1/4" MACHINE BUSHING
14 12 BSC0520 5/16" x 2" COTTER PIN
15 6 BSC0415 1/4" x 1 1/2" COTTER PIN
16 4 GW8000A 8000 lb GREASABLE HUB AND 14" SPINDLE ASSY
17 4 BN10L 5/8" NYLOCK NUT NC
18 4 B1045 5/8 x 4-1/2" BOLT
19 2 C10716 2 1/2" TURNBUCKLE LOCK
20 2 GBB125100075 1 1/4" x 1" x 3/4" LG. HARD BUSHING
21 4 GBB175150200 1 3/4" x 1 1/2" x 2" LG. HARD BUSHING
22 4 GBB175150062 1 3/4" x 1 1/2" x 5/8" LG. HARD BUSHING
23 4 GBB175150100 1 3/4" x 1 1/2" x 1" LG. HARD BUSHING
24 2 GP1600512A05 PIN 1" DIA. x 5 1/2" LG. - 2 HOLES
25 2 GPH2401312F 1 1/2" x 13 7/8" LG. AXLE PIN - HARDENED
26 2 GBB125100100 1 1/4" x 1" x 1" LG. HARD BUSHING
27 4 GM26 1" MACHINE BUSHING

Connect hoses and charge lift axle cylinders with fluid

CAUTION following the procedure in the axle lift hydraulics section of
this manual before connecting rod ends of the cylinders.

CHECK: Wheel nuts/ lugs for proper tightness.

(See torque & pressure values for tires section)

04-2011 Salford Farm Machinery Ltd. Page 33

 10000 LB TANDEM WITH 5000 LB HUB AXLE ASSEMBLY

Page 34
LH RH
Return to Contents

1 2

19 5
21 LH RH
6
7 3 4
21 8
9

17

18
20 23

14

Salford Farm Machinery Ltd.

10
570 27-41ft RTS & RTS XT Assembly and Parts Manual

11
16
12
13 5
15 6
10000lb Axle Assembly (27ft., 30ft.)

7
8
5 Kits 22 and 23 are 9
6 22 available on request.
7
10
11

04-2011
 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

10000lb Axle Assembly (27ft., 30ft.)

10000 LB TANDEM WITH 5000 LB HUB AXLE ASSEMBLY

ITEM NO. QTY. PART NO. DESCRIPTION
1 1 C7042L 10000 LB UPRIGHT BEAM - LH
2 1 C7042R 10000 LB UPRIGHT BEAM - RH
3 1 C00129L 10,000 LB WALKING BEAM WITH 5,000LB HUB SLEEVES - LH
4 1 C00129R 10,000 LB WALKING BEAM WITH 5,000LB HUB SLEEVES - RH
5 1 GW12110VW 10000/12000 LB GRASS WRAP GUARD
6 1 GW12110VS 10000/12000 LB V-SEAL
7 1 GW12110VC 10000/12000 LB COUNTERFACE
8 1 GB28995 12000 LB CONE, 10000 LB INNER CONE
9 1 GB28921 12000 LB CUP, 10000 LB INNER CUP
10 1 GB255204 10000 LB OUTER CUP
11 1 GB255814 10000 LB OUTER CONE
12 1 BF20S 1 1/4" SAE WASHER
13 1 BN20SF 1 1/4"NF SLOTTED HEX NUT
14 1 BSC0425 1/4" x 2 1/2" COTTER PIN
15 1 GW9112 10,000 LB DUST CAP
19 1 GF1610 1/8" NPT GREASE FITTING
16 2 GW5000A 5000 LB HUB AND SPINDLE ASSEMBLY
17 2 B1045 5/8 x 4-1/2" BOLT
18 2 BN10L 5/8" NYLOCK NUT NC
20 1 GBB125100075 1 1/4" x 1" x 3/4" LG. HARD BUSHING
21 2 GBB175150200 1 3/4" x 1 1/2" x 2" LG. HARD BUSHING
22 1 GW12110V 10000/12000 LB V-SEAL KIT
23 1 GW9111V 10000 LB BEARING WITH V-SEAL KIT

FRONT

LH AXLE RH AXLE
ASSEMBLY ASSEMBLY

04-2011 Salford Farm Machinery Ltd. Page 35

Return to Contents 570 27-41ft RTS & RTS XT Assembly and Parts Manual

14000lb
14000 LB SHROT Tandem Axle
TANDEM Assembly
AXLE ASSEMBLY
(305/70R22.5 TIRES - STANDARD,
12.5L X 15 LOAD RANGE "F" TIRES - OPTIONAL)

LH RH

USE INNER HOLE FOR FRONT

2

AND REAR SPINDLES

5

21
16 17

20 8
24
21
20
8

6
6

7
22
7
LH RH

3
18

13
13

12
12
23

10
11

15

14
19

25
9

Page 36 Salford Farm Machinery Ltd. 04-2011

 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

14000lb Tandem Axle Assembly

14000 LB SHROT TANDEM AXLE ASSEMBLY
(305/70R22.5 TIRES - STANDARD,
12.5L X 15 LOAD RANGE "F" TIRES - OPTIONAL)
ITEM NO. QTY PART NUMBER DESCRIPTION
1 1 C00110L 14,000 LB UPRIGHT BEAM - LH
2 1 C00145L 14,000 LB SHORT WALKING BEAM - LH
3 1 C00110R 14000 LB UPRIGHT BEAM - RH
4 1 C00145R 14,000 LB SHORT WALKING BEAM - LH
5 2 GW8000A 8000 lb GREASABLE HUB AND 14" SPINDLE ASSY
6 1 GB42687 14,000 LB INNER CONE
7 1 GB42620 14,000 LB INNER CUP
8 1 GW14110VC 14000 LB V-SEAL COUNTERFACE
9 1 GW14112 14,000 LB DUST CAP
10 1 BN28SF 1 3/4" NF SLOTTED FLANGE NUT
11 1 BSR0527 5/16" x 2 3/4" ROLL PIN
12 1 GB28995 12000 LB CONE, 10000 LB INNER CONE
13 1 GB28921 12000 LB CUP, 10000 LB INNER CUP
14 4 B0505 5/16"NC x 1/2" LG. HEX BOLT
15 1 GW14112S 14,000 LB DUST CAP SEAL
16 2 B1045 5/8 x 4 1/2" HEX BOLT GR 5
17 2 BN10L 5/8" NYLOCK NUT NC
18 2 GBB175150200 1 3/4" x 1 1/2" x 2" LG. HARD BUSHING
19 1 GBB125100075 1 1/4" x 1" x 3/4" LG. HARD BUSHING
20 1 GW14110VS 14,000 LB V-SEAL
21 1 GW14110VW 14000 LB V-SEAL GRASS WRAP GUARD
22 1 GF641 1/4"-28NF GREASE FITTING
23 1 GF1610 1/8" NPT GREASE FITTING
24 1 GW14110V 14,000 LB V-SEAL KIT
25 1 GW14111-1 14000LB BEARING KIT

FRONT

LH AXLE RH AXLE
ASSEMBLY ASSEMBLY

04-2011 Salford Farm Machinery Ltd. Page 37

Return to Contents 570 27-41ft RTS & RTS XT Assembly and Parts Manual

5000lb Wing Frame Axle Installation

WING TANDEM AXLE INSTALLATION

LH SHOWN 14 13

INITIAL SETTING OF 54"

FROM PIN TO PIN

21 22
18

11 13 19
20
8 9 10

12 13
12 13 19
REFER TO HYDRAULIC
SCHEMATIC FOR
CYLINDER SIZES

15
RH LH 16 17
5 4 1 2
LH RH
COMPLETE ASSEMBLY
18' SINGLE PARTS BREAKDOWN ON
FOLLOWING PAGES
AXLE 3

SINGLE OR
DUAL AXLE
(EXCEPT 18ft)

Page 38 Salford Farm Machinery Ltd. 04-2011

 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

WING TANDEM AXLE INSTALLATION

5000lb Wing Frame Axle Installation
ITEM NO. QTY. PART NO. DESCRIPTION
1 1 C4540WL 5000 LB WING AXLE ASSEMBLY - LH
2 1 C4540WR 5000 LB WING AXLE ASSEMBLY - RH
3 1 C00095 4000LB SINGLE OR DUAL AXLE
4 1 C0543L 17' CULTIVATOR AND 18' RTS RH SINGLE WHEEL AXLE
5 1 C0543R 17' CULTIVATOR AND 18' RTS RH SINGLE WHEEL AXLE
6 1 C4547B TOWER,450/550/570 WING
7 1 A60024 1 1/4" TURNBUCKLE - 45" TUBE
8 1 GPH2001314F 1 1/4" x 13 1/2" LG. AXLE PIN - HARDENED
9 1 BL10 5/8" LOCKWASHER
10 1 B1015 5/8 X 1 1/2" PLATED BOLT
11 1 GPHF1600314H04 1" x 3 1/4" SHOULDER PIN HARDENED W/FLATS
12 2 GP1600314H04 PIN 1" DIA. x 3 1/4" LG. WITH HEAD
13 4 BSC0415 1/4" x 1 1/2" COTTER PIN
14 1 GP1600258H04 PIN 1" DIA. x 2 5/8" LG. WITH HEAD
15 2 GW4000A 4000 LB HUB AND SPINDLE ASSEMBLY
16 2 B0835 1/2 X 3 1/2" BOLT
17 2 BN08L 1/2" NYLOCK NUT NC
18 2 GBB150125100 1 1/2" x 1 1/4" x 1" LG. HARD BUSHING
19 2 GBB125100075 1 1/4" x 1" x 3/4" LG. HARD BUSHING
20 1 FL00051 LIGHT TURNBUCKLE LOCK
21 1 GP0800312L03 1/2" x 3 1/2" PARKING STAND PIN
22 1 GHP11 #11 HAIR PIN
QUANTITIES SHOWN ARE FOR ONE WING AXLE
INSTALLATION
Note orientation of lugs on axle towers (Left/Right).

1. Line up axle tower and upright of tandem axle assembly with lugs on wing frame.
Insert 1 1/4" x 13" pin through tower and axle. Retain pin with 5/8" x 1 1/2" hex bolt and
5/8" lockwasher.

2. Set wing turnbuckle to 54 inches pin to pin. Connect turnbuckle with 1" x 2 5/8"
head pins and 1/4" x 1 1/2" cotter pins.

3. Attach 3 1/4" bore x 8" stroke hydraulic cylinder to axle tower with 1" x 3 1/4" head
pin and 1/4" x 1 1/2" cotter pin. The rod end may remain loose until cylinders are
charged.

4. Insert removeable 4000 lb hub and spindle assemblies into axles and retain with
1/2" x 3 1/2" hex bolts and 1/2" locknuts.

Salford uses hard press-in bushings to reduce permanent wear. At a time that the
bushings are to be replaced, hammer out old bushings taking care not to scar the
frame. New bushings will need to be hammered in as they are spring-loaded by design.

Hubs are greased at shipping.

04-2011 Salford Farm Machinery Ltd. Page 39

Return to Contents 570 27-41ft RTS & RTS XT Assembly and Parts Manual

5000lb Axle Assembly

5000 LB TANDEM AXLE ASSEMBLY

9
20
18

10
6

11
19

12
20

13
18

14
19

15
7
8

21
9
LEFT SHOWN

10

23
11

16

9
12

10
13
22

11
14

17
23

15
LH RH
1
2

22
22
LH RH
5
4

AXLE (EXCEPT 18')

SINGLE OR DUAL
18' SINGLE AXLE

Page 40 Salford Farm Machinery Ltd. 04-2011

 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

5000lb Axle Assembly

/%7$1'(0$;/($66(0%/<
,7(012 47< 3$5712 '(6&5,37,21
  &:/ /%:,1*835,*+7$;/(/+
  &:5 /%:,1*835,*+7$;/(5+
  & /%6,1*/(25'8$/$;/(
  &/ 
&8/7,9$725$1'
5765+6,1*/(:+((/$;/(
  &5 
&8/7,9$725$1'
5765+6,1*/(:+((/$;/(
  & /%:$/.,1*%($0
  *:9: /%96($/*5$66:5$3*8$5'
  *:96 /%96($/
  *:9& /%6($/&2817(5)$&(
  *% /%,11(5&21(
  *% /%,11(5&83
  *% /%287(5&83/%,11(5&83
  *% /%287(5&21(/%,11(5&21(
  %) +$5'6$()/$7:$6+(5*53/$7('
  %16 6/277('+(;187
  %6& [&277(53,1
  *: /%'867&$3
  *:$ /%+8%$1'63,1'/($66(0%/<
  % ;%2/7
  %1/ 1</2&.1871&
  *) 137*5($6(),77,1*
  *%% [[/*+$5'%86+,1*
  *%% [[/*+$5'%86+,1*
  *:9 /%96($/.,7
  *:9 /%%($5,1*:,7+96($/.,7
6((+8% 63,1'/(3$*(6)25)857+(5%5($.'2:1

)5217

/+$;/( 5+$;/(
$66(0%/< $66(0%/<

04-2011 Salford Farm Machinery Ltd. Page 41

Return to Contents 570 27-41ft RTS & RTS XT Assembly and Parts Manual

5000lb Axle Assembly

8
7
5

12
6

10

14
4

11
3

9
2

4
7

3
13

2
15

6
5
4
3

12
2

8
7
1

6
5
4
3
2
16

Page 42 Salford Farm Machinery Ltd. 04-2011

 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

5000lb Axle Assembly

ITEM QTY PART NO. DESCRIPTION

1 1 GW5014 5000 LB SPINDLE-14 IN. LG
2 1 GW5110VW 5000 LB V-SEAL GRASS WRAP GUARD
3 1 GW5110VS 5000 LB V-SEAL
4 1 GW5110VC 5000 LB SEAL COUNTERFACE
5 1 GB603049 5000/5500 LB INNER CONE
6 1 GB603011 5000/5500 LB INNER CUP
7 1 GB48510 5000/5500 LB OUTER CUP, 3000 LB INNER CUP
8 1 GB48548 5000/5500 LB OUTER CONE, 3000 LB INNER CONE
9 1 BF16-9 1" HARD SAE FLAT WASHER GR.9 PLATED
10 1 BN16SF 1" NF SLOTTED HEX NUT
11 1 BSC0317 3/16" x 1 3/4" COTTER PIN
12 1 GW5112 5000/5500 LB DUST CAP
13 6 BW0912 9/16"-18 x 1 1/4" WHEEL BOLT
14 1 GW5110V 5000 LB V-SEAL KIT
15 1 GW5111V 5000 LB BEARING WITH V-SEAL KIT
16 1 GW5000B 5000 LB HUB WITH BEARINGS, SEAL, & DUST CAP

Complete assembly available as part number GW5000A (includes hub, spindle, bearings,
seals, dust cap, and hardware).

04-2011 Salford Farm Machinery Ltd. Page 43

Return to Contents 570 27-41ft RTS & RTS XT Assembly and Parts Manual

4000lb Hub & Spindle Assembly

12
8

10
7

14
11
6

9
5

8
4

4
7
3

3
13
2

2
6
5
15

12
4

8
3

7
2

6
5
1

4
3
2
16

Page 44 Salford Farm Machinery Ltd. 04-2011

 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

4000lb Hub & Spindle Assembly

ITEM QTY PART NO. DESCRIPTION

1 1 GW4010 4000 LB SPINDLE - 10" LG.
2 1 GW4110VW 4000 LB GRASS WRAP
3 1 GW4110VS 4000 LB V-SEAL
4 1 GW4110VC 4000 LB SEAL COUNTER FACE
5 1 GB29749 4000 LB INNER CONE
6 1 GB29710 4000 LB INNER CUP
7 1 GB67010 4000 LB OUTER CUP
8 1 GB67049 4000 LB OUTER CONE
9 1 BF16-9 1" HARD SAE FLAT WASHER GR.9 PLATED
10 1 BN16JS 1"-14NF SLOTTED JAM NUT
11 1 BSC0317 3/16" x 1 3/4" COTTER PIN
12 1 GW4112 4000 LB DUST CAP
13 6 BW0912 9/16"-18 x 1 1/4" WHEEL BOLT
14 1 GW4110V 4000 LB V-SEAL KIT
15 1 GW4111V 4000LB BEARING WITH V-SEAL KIT
16 1 GW4000B 4000 LB HUB WITH BEARINGS, SEAL, & DUST CAP

Complete assembly available as part number GW4000A (includes hub, spindle, bearings,
seals, dust cap, and hardware).

04-2011 Salford Farm Machinery Ltd. Page 45

Return to Contents 570 27-41ft RTS & RTS XT Assembly and Parts Manual

8000lb Hub & Spindle Assembly

12
8

10
7

11
5
6

16
4

8
3

7
2

14

4
3
2
13
17

6
5

12
4

8
3

7
2

6
5
1

4
3
2
15

Page 46 Salford Farm Machinery Ltd. 04-2011

 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

8000lb Hub & Spindle Assembly

ITEM NO. QTY PART NUMBER DESCRIPTION

1 1 GW8014 SPINDLE, 8 000 LBS.
2 1 GW8110VW 8000 LB V-SEAL GRASS WRAP GUARD
3 1 GW8110VS 8000 LB V-SEAL
4 1 GW8110VC 8000 LB V-SEAL COUNTERFACE
5 1 GB506849 8000 INNER CONE
6 1 GB506810 8000 INNER CUP
7 1 GB501310 8000 OUTER CUP
8 1 GB501349 8000 OUTER CONE
9 1 GW8108 1" SPINDLE WASHER
10 1 BN16S 1" SLOTTED HEX NUT
11 1 BSC0317 3/16" x 1 3/4" COTTER PIN
12 1 GW8112 8000 DUST CAP
13 8 BW1020 5/8" x 2" PRESS-IN WHEEL STUD
14 8 BW10 5/8" WHEEL LUG NUT
15 1 GW8000 8000 LB HUB WITH BEARINGS, V-SEAL, & DUSTCAP
16 1 GW8110V 8000 LB V-SEAL KIT
17 1 GW8111V 8000 LB BEARING WITH V-SEAL KIT

Entire assembly available as part number GW8000A (includes hub, spindle, bearings,
seal, dust cap, and hardware).

04-2011 Salford Farm Machinery Ltd. Page 47

Return to Contents 570 27-41ft RTS & RTS XT Assembly and Parts Manual

Wavy Coulter & Mounts

This bolt must be loose so that the

coulter can swivel easily. However,
NO WASHERS IF USING
LOCKING COLLAR
! the bolt must be tight if the "non-
10 swivel collar" 10 is used.

13 13
15 10
14
13
15
11 14

1
5
9
RIGHT LEFT
4 3
8

16 15

LEFT RIGHT
As viewed from Must be stover locknuts (crimp type)
rear of machine Nylon locknuts are too long and
! will not engage.

When substituting optional drop mount 2 be sure to follow

coulter layout with regard to where non-swivel coulters are located.

Page 48 Salford Farm Machinery Ltd. 04-2011

 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

Wavy Coulter & Mounts

ITEM NO. QTY. PART NO. DESCRIPTION
1 1 C90120 RTS COULTER MOUNT
2 1 C90150 RTS DROP COULTER MOUNT
3 1 A8050LWA LEFT COIL WITH SPINDLE AND HUB
4 1 A8050RWA RIGHT COIL WITH SPINDLE AND HUB
5 2 GBW21500500 WEAR BAND-1 1/2 OD X 1 1/4 ID-1/2 LG
6 1 CT511708 COIL-TECH COULTER 17" 8 WAVE 1 3/4" WAVE
7 1 CT511713 COIL-TECH COULTER 17" 13 WAVE 3/4" WAVE
8 1 CT512008 COIL-TECH COULTER 20" 8 WAVE 2" WAVE
9 1 CT512013 COIL-TECH COULTER 20" 13 WAVE 3/4" WAVE
10 1 C90125 RTS CAST MOUNT SWIVEL STOP
11 2 BU1061 U-BOLT 5/8" x 6" x 5 1/2"
12 4 BN10L 5/8" NYLOCK NUT NC
13 2 BF08HS 1/2" HARD STRUCTURAL FLAT WASHER
14 1 B0832ST 1/2"-13NC x 3 1/4" SHORT THREAD BOLT
15 5 BN08S 1/2"-13NC STOVER LOCK NUT
16 4 B0825 1/2" x 2 1/2" HEX BOLT

04-2011 Salford Farm Machinery Ltd. Page 49

Return to Contents 570 27-41ft RTS & RTS XT Assembly and Parts Manual

COIL-TECH C90101 Coil-Tech

EXPLODED Hub
VIEW

1
2
3
4
12

DO NOT BACK OFF AFTER TIGHTENING

TIGHTEN SPINDLE NUT TO 70ft-Lbs
6
13

7
9
6

8
11

!
14
10

Page 50 Salford Farm Machinery Ltd. 04-2011

 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

COIL-TECH Coil-Tech
C90101 EXPLODED
Hub VIEW
ITEM NO. QTY. PART NO. DESCRIPTION
1 - 12 C90101AS CAST COIL-TECH COULTER HUB COMPLETE (includes spindle)
1 1 C90105 COIL-TECH COULTER SPINDLE FOR CAST HUB
2 1 C9111VW GRASS WRAP
3 1 C9111VS V-SEAL
4 1 C9111VC SEAL COUNTER FACE
5 1 GBS20148 20148 OIL SEAL
6 2 GB6208 6208 BEARING
7 1 C90006 RTS COULTER BEARING SPACER
8 1 C90101 CAST COIL-TECH COULTER HUB
9 1 GF641 1/4"-28NF GREASE FITTING
10 1 BSC0415 1/4" x 1 1/2" COTTER PIN
11 1 C90102 DUST CAP-PRESS ON
12 4 B0825 1/2" x 2 1/2" HEX BOLT
13 4 BN08S 1/2"-13NC STOVER LOCK NUT
14 1 BN16FCH 1"-14NF FLANGED CASTLE NUT GR. 8
2, 3, 4, 5 C9111VA V-SEAL KIT (includes grass wrap, v-seal, counter face and oil seal)
6.7 C91115 BEARING KIT (2 x 6208 bearings and bearing spacer)
2,3,4,5,6,7 C90020 COIL-TECH COULTER BEARING, V-SEAL AND SPACER KIT

C9111VA - V-SEAL KIT

TIGHTEN SPINDLE NUT TO 70ft-Lbs
! DO NOT BACK OFF AFTER TIGHTENING

C90020 - COIL-TECH BEARINGS, V-SEAL

AND SPACER KIT.

C91115 - BEARING KIT (COIL TECH)

04-2011 Salford Farm Machinery Ltd. Page 51

 Page 52
USE BOTTOM HOLE
FOR ROLLER STOP 4
Return to Contents

HOLD SPRING 1 A ITEM NO. PART NO. DESCRIPTION

BACK WITH B 1 BU1061 U-BOLT 5/8x6x5-1/2"
TOOL AND SET 2 BU1020 U-BOLT 5/8x2x3"
POSITION WITH 3 BU0825 U-BOLT 1/2x2-1/2X3-1/2"
#9 HAIR PINS A 5/8" HARD STRUCTURAL
4 BF10HS FLAT WASHER
USE NYLON LOCKNUTS PROVIDED
B

A: USE SLOTS FOR 20" BLADES. (MOUNT WITH BRACKET PUSHED

ALL THE WAY UP SO THAT THE U-BOLT SITS IN LOWER PART OF THE
SLOT) NOTICE: 16' & 50' MACHINES USE THIS POSITION FOR 17" & 20"
BLADES.

B: USE NEXT HOLE DOWN FOR 17" BLADES. EXCEPT ON 16' & 50'
MACHINES. (17" BLADE POSITION SHOWN BELOW)
RB0025
HARROW

PLACE TINE HARROW

PIN HERE (BOTTOM HOLE)
Harrow

A60105
SETUP

RB0026

Salford Farm Machinery Ltd.

Setup

2 3
BOLT HARROW SPRING TOOL
WITH U-BOLT.
570 27-41ft RTS & RTS XT Assembly and Parts Manual

DO NOT HANG ON WING OR IT

WILL FALL OFF WHEN FOLDED

SET RAKE
ANGLE

04-2011
 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

Tine
TINE Performance Settings
PERFORMANCE SETTINGS
For better trash flow, the tines are adjustable in 2 ways:

use bottom bolt

hole for
'standard' setting.

Shown here is the 'standard' setting

use top bolt

hole to
angle tines

Here the tine section is angled

by changing the bolt hole used.

This Angle-Iron has two

sets of holes.

Here the rake angle is varied

This set of holes is the 'standard' setting.

1" 1"

3/4" 5/8"
FRONT
Using this set of holes will vary the rake angle
as shown above.

04-2011 Salford Farm Machinery Ltd. Page 53

Return to Contents 570 27-41ft RTS & RTS XT Assembly and Parts Manual

62” Arm Assembly

FLIP SPACER OVER

FOR S-TINES
17

6
3

11
25
13

STANDARD

AS SHOWN
POSITION
10

7
9

2
1
9

18 19
20

12

6
16
23

7
21

22

14
24

5
4

Page 54 Salford Farm Machinery Ltd. 04-2011

 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

62” Arm Assembly

ITEM NO. QTY. PART NO. DESCRIPTION

1 1 R30012 PARALLEL LINKAGE BAR
2 1 R30006 PARALLEL LINKAGE ARM
3 1 R80099 HEAD,SALFORD HARROW FOR 5/8" UPPER PIVOT BOLT
4 1 R80100 62" HARROW ARM FOR 5/8" PIVOT AND U-BOLTS
5 1 R80100A 62" HARROW ARM W/ KIT (REPLACES RB1125)
1/2" X 13NC X 3-1/2" LG. CARRIAGE BOLT GR. 5 SHORT
6 5 BC0835H THREAD
7 4 R0030 NYLON BUSHING 3/4" OD x 1/2" ID x 1.94 LG.
8 5 BN08L 1/2" NYLOCK NUT NC
9 2 BN10L 5/8" NYLOCK NUT NC
10 1 GP0800312L03 1/2" x 3 1/2" PARKING STAND PIN
11 1 GHP11 #11 HAIR PIN
12 2 R0035 2" x 10" HARROW ARM SPRING
++ 13 1 R80128 ROLLER ARM STOP BRACKET (LONG)
14 1 R80037L TINE SECTION UPRIGHT PLATE LEFT
15 1 R80037R TINE SECTION UPRIGHT PLATE RIGHT
16 1 R0028 STEEL HEAD SPACER 2 1/8" LG.
17 2 B1037ST 5/8" - 11NC X 3 3/4" SHORT THREAD BOLT
18 1 R80098 7/8"OD NYLATRON BUSHING
19 1 R80106 7/8"OD - 0.520"ID NYLATRON ROD
20 1 R80096 HARROW ARM SPACER
21 2 RB0021 TIGHTENER,SINGLE SPRING
22 2 B0615 3/8" X 1 1/2" LG. GRADE 5
23 2 BN06L 3/8"-16NC LOCK NUT
24 2 GHP9 #9 HAIR PIN
25 1 B1045 5/8 x 4 1/2" HEX BOLT GR 5

NOTES:
++ USE R80130 FOR S-TINE CULTIVATORS

04-2011 Salford Farm Machinery Ltd. Page 55

 Page 56
FOR ENDS OF OPTIONAL SECOND
FRONT TUBE ONLY TUBE FOR WEIGHT
Return to Contents

TINE ANGLE ADJUSTER

SHOWN HERE ON INNER LEFT.
5 SEE HARROW LAYOUT FOR
7
MACHINE SPECIFIC POSITIONS.
1 4

16
13
18 21
14 12
17 11 FOR ADJUSTOR
10 MOUNTS ONLY
15
16
14

Salford Farm Machinery Ltd.

6
8
1/2” Tine Harrow Assembly
570 27-41ft RTS & RTS XT Assembly and Parts Manual

2
16

14
6
19
20

9 ALL OTHER
POSITIONS

04-2011
 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

1/2” Tine Harrow Assembly

1/2" - 3 TINE HARROW ASSEMBLY PART NO. R633

ITEM NO. PART NO. DESCRIPTION
1 U252503054 TUBE 2 1/2 x 2 1/2 x 3/16"W x 54" LG.
2 R6063 TINE PIPE FOR 1/2" (3-TINE)

1/2" - 4 TINE HARROW ASSEMBLY PART NO. R634

ITEM NO. PART NO. DESCRIPTION
1 U252503072 TUBE 2 1/2 x 2 1/2 x 3/16"W x 72" LG.
2 R6064 TINE PIPE FOR 1/2" (4-TINE)

1/2" - 5 TINE HARROW ASSEMBLY PART NO. R635

ITEM NO. PART NO. DESCRIPTION
1 U252503092 TUBE 2 1/2 x 2 1/2 x 3/16"W x 92" LG.
2 R6065 TINE PIPE FOR 1/2" (5-TINE)

1/2" - 6 TINE HARROW ASSEMBLY PART NO. R636

ITEM NO. PART NO. DESCRIPTION
1 U252503112 TUBE 2 1/2 x 2 1/2 x 3/16"W x 112" LG.
2 R6066 TINE PIPE FOR 1/2" (6-TINE)

COMMON PARTS
ITEM NO. PART NO. DESCRIPTION
3 R30002 1/2" TINE TUBE CONNECTOR
4 R30011 CLAMP BRACKET
5 B0812 1/2 X 1 1/4" BOLT
6 BN08L 1/2" NYLOCK NUT NC
7 BU1025 U-BOLT 5/8" x 2 1/2" x 4"
8 BN10L 5/8" NYLOCK NUT NC
9 R60000 1/2" WIRE - 20" DBL LEG SPRING TINE
10 R30007 ADJUSTING BRACKET WELDMENT
11 R30005 1/2" TINE 3 BAR ADJUST CONNECTOR
12 R30010 ADJUSTING BAR HD 3 BAR TINE
13 R30008 ADJUSTING BRACKET HANDLE WELDMENT
14 R9063 .75 OD x .438 ID X 3/4 LONG SPACER
15 B0640 3/8"NC x 4" LG. HEX BOLT
16 BN06S 3/8"-16NC STOVER LOCK NUT
17 B0635 3/8"NC x 3 1/2" LG. HEX BOLT
18 R30015 LIGHT SAVER BRACKET
19 B0630 3/8"NC x 3" HEX BOLT
20 B0815 1/2" x 1 1/2" HEX BOLT
21 GHP11 #11 HAIR PIN

04-2011 Salford Farm Machinery Ltd. Page 57

 Page 58
Return to Contents

PT# GD1071
2
SALFORD
Decal on frame
tube facing rear

PT# GD10840

6
40HR Install grease decal
towards rear of frame

Salford Farm Machinery Ltd.

14” Roller Parts

7 Arrow shows roller

rotation direction
570 27-41ft RTS & RTS XT Assembly and Parts Manual

(5' ROLLER SHOWN)

3

4 Install bearing with grease

5
fitting facing rear of roller

04-2011
 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

14" ROLLER HARROW ASSEMBLY - 3' 0" (91.4) LONG

COMPLETE ASSEMBLY PART NO. MR80143(L/R)
ITEM NO. QTY. PART NO. DESCRIPTION
1 1 R80147R 3' ROLLER ONLY RIGHT HAND SPIRAL, 14" DIA.
2 1 R80137-3 3' ROLLER FRAME FOR 14" ROLLER
3 2 A60099 1 1/4" x 1 1/2" x 1 19/32"LG BUSHING
4 2 GB491-B 1 1/2" BEARING COMPLETE
5 2 BN20JL 1 1/4"NC JAM LOCK NUT
6 6 BC0812H CARRIAGE BOLT 1/2"NC x 1 1/4" LG. GR. 5
7 6 BN08S 1/2"-13NC STOVER LOCK NUT

14" ROLLER HARROW ASSEMBLY - 4' 0" (121.9) LONG

COMPLETE ASSEMBLY PART NO. MR80144(L/R)
ITEM NO. QTY. PART NO. DESCRIPTION
1 1 R80148R 4' ROLLER ONLY RIGHT HAND SPIRAL, 14" DIA.
2 1 R80137-4 4' ROLLER FRAME FOR 14" ROLLER
3 2 A60099 1 1/4" x 1 1/2" x 1 19/32"LG BUSHING
4 2 GB491-B 1 1/2" BEARING COMPLETE
5 2 BN20JL 1 1/4"NC JAM LOCK NUT
6 6 BC0812H CARRIAGE BOLT 1/2"NC x 1 1/4" LG. GR. 5
7 6 BN08S 1/2"-13NC STOVER LOCK NUT

14" ROLLER HARROW ASSEMBLY - 5' 0" (152.4) LONG

COMPLETE ASSEMBLY PART NO. MR80145(L/R)
ITEM NO. QTY. PART NO. DESCRIPTION
1 1 R80149R 5' ROLLER ONLY RIGHT HAND SPIRAL, 14" DIA.
2 1 R80137-5 5' ROLLER FRAME FOR 14" ROLLER
3 2 A60099 1 1/4" x 1 1/2" x 1 19/32"LG BUSHING
4 2 GB491-B 1 1/2" BEARING COMPLETE
5 2 BN20JL 1 1/4"NC JAM LOCK NUT
6 6 BC0812H CARRIAGE BOLT 1/2"NC x 1 1/4" LG. GR. 5
7 6 BN08S 1/2"-13NC STOVER LOCK NUT

14" ROLLER HARROW ASSEMBLY - 6' 2" (187.9) LONG

COMPLETE ASSEMBLY PART NO. MR80146(L/R)
ITEM NO. QTY. PART NO. DESCRIPTION
1 1 R80150R 6'2" ROLLER ONLY RIGHT HAND SPIRAL, 14" DIA.
2 1 R80137-6 6'2" ROLLER FRAME FOR 14" ROLLER
3 2 A60099 1 1/4" x 1 1/2" x 1 19/32"LG BUSHING
4 2 GB491-B 1 1/2" BEARING COMPLETE
5 2 BN20JL 1 1/4"NC JAM LOCK NUT
6 6 BC0812H CARRIAGE BOLT 1/2"NC x 1 1/4" LG. GR. 5
7 6 BN08S 1/2"-13NC STOVER LOCK NUT

04-2011 Salford Farm Machinery Ltd. Page 59

 Page 60
51" 47" 19" 19" 47" 51"
Return to Contents

12" 13" 13" 8" 21" 8" 13" 13" 12"

11" 11"
9" 9"
Must be Rigid 6" 6" Must be Rigid
straddle beam straddle beam
5" 4" 4" 5"

5" 5"
5" 12" 5" 5"

12" 12" 12" 12"

12" 12"
12" 12"
5" 12"
6" 5" 4" 5" 5" 4" 5" 6"
SALFORD

Salford Farm Machinery Ltd.

570 27-41ft RTS & RTS XT Assembly and Parts Manual

LEGEND
27FT 570 RTS COULTER SPACING

23 BLADES
100LBS WEIGHT KIT
LAYOUT SHOWS MAXIMUM 47 COULTERS
WEIGHTS ADDED (50LBS/FT) 37 SWIVEL
10 RIDGID
NON-SWIVELLING
NOTE:
SPRING MOUNT CENTER COILS
24 BLADES
MAY BE RH OR LH
IMPORTANT!!
NON-SWIVEL SWIVEL KEEP HUBS POINTING
FOR MACHINES WITH BOTH 13 & 8 WAVE COULTERS, OUTWARD. BEGIN IN
USE HARDENED WASHERS INSTALL THE 13 WAVE COULTERS ON THE FRONT,
NOTE WHICH SIDE AND THE 8 WAVE COULTERS ON THE REAR
CENTER OF MACHINE
LEAVE BOLT LOOSE TO OF BEAM TO MOUNT
ALLOW SWIVEL. THE COULTER

04-2011
04-2011
51" 47" 19" 19" 47" 51"
19" 13" 13" 8" 21" 8" 13" 13" 19"

11" 11"
9" 9"
Must be Rigid 6" 6" Must be Rigid
straddle beam straddle beam
5" 5"
4" 4"

5" 5"
5" 12" 5" 5"

12" 12"
12" 12"
12" 12"
5" 12"
6" 5" 4" 5" 5" 4" 5" 6"

19"
SALFORD

19"

Salford Farm Machinery Ltd.

570 27-41ft RTS & RTS XT Assembly and Parts Manual

LEGEND
23 BLADES
100LBS WEIGHT KIT
LAYOUT SHOWS MAXIMUM 47 COULTERS
WEIGHTS ADDED (50LBS/FT) 37 SWIVEL
10 RIDGID
27FT 570 RTS COULTER SPACING - DUAL AXLES

NON-SWIVELLING
NOTE:
SPRING MOUNT CENTER COILS
24 BLADES MAY BE RH OR LH
IMPORTANT!!
NON-SWIVEL SWIVEL KEEP HUBS POINTING
FOR MACHINES WITH BOTH 13 & 8 WAVE COULTERS, OUTWARD. BEGIN IN
USE HARDENED WASHERS NOTE WHICH SIDE
INSTALL THE 13 WAVE COULTERS ON THE FRONT, CENTER OF MACHINE
AND THE 8 WAVE COULTERS ON THE REAR
LEAVE BOLT LOOSE TO OF BEAM TO MOUNT
ALLOW SWIVEL. THE COULTER
Return to Contents

Page 61
 Page 62
Return to Contents

Tine angle A
adjuster
Set tine B
rake angle Roller Spring A
Adjuster.
Bolt on B
center frame
20" BLADES: USE SLOT (A)
17" BLADES: USE NEXT HOLE DOWN(B)

Tine angle
adjuster
SALFORD

Salford Farm Machinery Ltd.

27ft 570 RTS HARROW LAYOUT
570 27-41ft RTS & RTS XT Assembly and Parts Manual

1" 2 - 3" 1" 2 - 3" 1"

23" 18" 30" 31" 39" 32" 39" 31" 30" 18" 23"

5 TINE 3 TINE 4 TINE 5 TINE

R635 R633 R634 R635

3ft ROLLER 4ft ROLLER 6ft 2in ROLLER 6ft 2in ROLLER 4ft ROLLER 3ft ROLLER
MR80143R MR80144R MR80146R MR80146R MR80144R MR80143R

04-2011
04-2011
65" 47" 19" 19" 47" 65"
12" 21" 13" 8" 8" 13" 13" 21" 12"
13"

5" 11" 6" 21" 6" 11" 5"

9" 9" STRADDLE
STRADDLE BEAM
5" BEAM 4" 4" 5"

12" 12"

5" 5" 5"

5" 5" 5"
12" 5"
12" 12"
12" 12"
12" 12"

5" 4" 4" 5"

5" 12"

6" 12" 5" 5" 12" 6"

SALFORD

Salford Farm Machinery Ltd.

30FT 570 RTS COULTER SPACING
570 27-41ft RTS & RTS XT Assembly and Parts Manual

LEGEND
27 BLADES
100LBS WEIGHT KIT
LAYOUT SHOWS MAXIMUM 53 COULTERS
WEIGHTS ADDED (50LBS/FT) 43 SWIVEL
10 RIGID
NON-SWIVELLING
NOTE:
SPRING MOUNT 26 BLADES CENTER COILS
MAY BE RH OR LH
IMPORTANT!!
NON-SWIVEL SWIVEL KEEP HUBS POINTING
FOR MACHINES WITH BOTH 13 & 8 WAVE COULTERS, OUTWARD. BEGIN IN
USE HARDENED WASHERS NOTE WHICH SIDE
INSTALL THE 13 WAVE COULTERS ON THE FRONT, CENTER OF MACHINE
AND THE 8 WAVE COULTERS ON THE REAR
LEAVE BOLT LOOSE TO OF BEAM TO MOUNT
ALLOW SWIVEL. THE COULTER
Return to Contents

Page 63
 Page 64
Return to Contents

65" 47" 19" 19" 47" 65"

19" 21" 13" 8" 8" 13" 13" 21" 19"
13"

5" 11" 6" 21" 6" 11" 5"

9" 9" STRADDLE
STRADDLE BEAM
5" BEAM 4" 4" 5"

12" 12"
5" 5"
12" 5"
5" 5" 5" 5"

12" 12"
12" 12"

5" 4" 4" 5"

5" 12"

6" 19" 12" 5" 5" 12" 19" 6"

SALFORD

Salford Farm Machinery Ltd.

570 27-41ft RTS & RTS XT Assembly and Parts Manual

LEGEND
27 BLADES
100LBS WEIGHT KIT
LAYOUT SHOWS MAXIMUM 53 COULTERS
WEIGHTS ADDED (50LBS/FT)
30FT 570 RTS COULTER SPACING - DUAL AXLES

45 SWIVEL
8 RIGID
NON-SWIVELLING
NOTE:
SPRING MOUNT CENTER COILS
26 BLADES
MAY BE RH OR LH
IMPORTANT!!
NON-SWIVEL SWIVEL KEEP HUBS POINTING
FOR MACHINES WITH BOTH 13 & 8 WAVE COULTERS, OUTWARD. BEGIN IN
USE HARDENED WASHERS INSTALL THE 13 WAVE COULTERS ON THE FRONT, CENTER OF MACHINE
LEAVE BOLT LOOSE TO NOTE WHICH SIDE AND THE 8 WAVE COULTERS ON THE REAR
OF BEAM TO MOUNT
ALLOW SWIVEL. THE COULTER

04-2011
04-2011
A
Tine angle
adjuster B
Set tine Roller Spring
rake angle A
Adjuster.
Bolt on B
center frame 20" BLADES: USE SLOT (A)
17" BLADES: USE NEXT HOLE DOWN(B)
Tine angle
adjuster
SALFORD

Salford Farm Machinery Ltd.

570 27-41ft RTS & RTS XT Assembly and Parts Manual

30ft 570 RTS HARROW LAYOUT

1" 2 - 3" 1" 2 - 3" 1"

44" 16" 32" 30 1/2" 39" 32" 39" 30 1/2" 32" 16" 44"

6 Tine 3 Tine 4 Tine 6 Tine

R636 R633 R634 R636

5ft Roller 4ft Roller 6ft 2in Roller 6ft 2in Roller 4ft Roller 5ft Roller
MR80145R MR80144R MR80146R MR80146R MR80144R MR80145R
Return to Contents

Page 65
 Page 66
SALFORD 36ft RTS
Return to Contents

25" 56 1/2" 40 1/2" 37" 37" 40 1/2" 56 1/2" 25"

118" 9" 182" 9" 118"

25" 10" 18 1/2" 19 1/2" 19 1/2" 18 1/2"
10" 25"

5" 6" 12 1/2" 12 1/2" 6" 5"

6 1/2"

5 1/2" 4 1/2" 4 1/2" 5 1/2"

4" 6 1/2" 4"
4 1/2" 4 1/2"

12" 10" 12"

10"
12 1/2" 12 1/2"
11 1/2" 11 1/2"

10" 10"

3" 3"
14"
3" 31" 14" 3"
4 1/2" 4 1/2"
3" 10" 3"
7"
7"
7" 7" 7"
7"
10"
31"
5" 21" 21" 5"
12 1/2" 21" 21" 12 1/2"

Salford Farm Machinery Ltd.

LEGEND
570 27-41ft RTS & RTS XT Assembly and Parts Manual

30 BLADES
100LBS WEIGHT KIT
LAYOUT SHOWS MAXIMUM 62 COULTERS
WEIGHTS ADDED (50LBS/FT) 52 SWIVEL
10 RIGID
NON-SWIVELLING
NOTE:
SPRING MOUNT 32 BLADES CENTER COILS
MAY BE RH OR LH
IMPORTANT!!
NON-SWIVEL SWIVEL KEEP HUBS POINTING
FOR MACHINES WITH BOTH 13 & 8 WAVE COULTERS, OUTWARD. BEGIN IN
USE HARDENED WASHERS INSTALL THE 13 WAVE COULTERS ON THE FRONT, CENTER OF MACHINE
NOTE WHICH SIDE AND THE 8 WAVE COULTERS ON THE REAR
LEAVE BOLT LOOSE TO OF BEAM TO MOUNT
ALLOW SWIVEL. THE COULTER

04-2011
04-2011
SALFORD
36FT 570 RTS COULTER SPACING - DUAL AXLES

25" 56 1/2" 40 1/2" 37" 37" 40 1/2" 56 1/2" 25"

118" 9" 182" 9" 118"

25" 10" 18 1/2" 19 1/2" 19 1/2" 18 1/2"
10" 25"

5" 6" 12 1/2" 12 1/2" 6" 5"

6 1/2"
5" 5"

5 1/2" 4 1/2" 4 1/2" 5 1/2"

4" 6 1/2" 4"
4 1/2" 4 1/2"

10" 12 1/2" 12 1/2" 12"

10"
11 1/2" 11 1/2"

10" 10"

3" 3"
14"
3" 31" 14" 3"
4 1/2" 4 1/2"
3" 10" 3"
7"

7" 7" 7"

10"
31"
5" 12 1/2" 21" 21" 12 1/2" 7" 5"
7"

21" 21"

Salford Farm Machinery Ltd.

570 27-41ft RTS & RTS XT Assembly and Parts Manual

LEGEND
30 BLADES
100LBS WEIGHT KIT
LAYOUT SHOWS MAXIMUM 62 COULTERS
WEIGHTS ADDED (50LBS/FT) 52 SWIVEL
10 RIGID
NON-SWIVELLING
NOTE:
SPRING MOUNT CENTER COILS
32 BLADES
MAY BE RH OR LH
IMPORTANT!!
NON-SWIVEL SWIVEL KEEP HUBS POINTING
FOR MACHINES WITH BOTH 13 & 8 WAVE COULTERS, OUTWARD. BEGIN IN
USE HARDENED WASHERS INSTALL THE 13 WAVE COULTERS ON THE FRONT, CENTER OF MACHINE
NOTE WHICH SIDE AND THE 8 WAVE COULTERS ON THE REAR
LEAVE BOLT LOOSE TO OF BEAM TO MOUNT
ALLOW SWIVEL. THE COULTER
Return to Contents

Page 67
 Page 68
Return to Contents

Set tine A
rake angle Roller Spring B
Adjuster.
Bolt on A
center frame
B

20" BLADES: USE SLOT (A)

17" BLADES: USE NEXT HOLE DOWN(B)

22"

Salford Farm Machinery Ltd.

2 - 3" 1"
SALFORD

1" 1" 2 - 3" 1"

570 27-41ft RTS & RTS XT Assembly and Parts Manual

39 1/2" 40 1/4" 39 1/2" 21" 44" 21" 39 1/2" 40 1/4" 39 1/2" 32"
36FT RTS HARROW LAYOUT

32"
12 1/2" 12 1/2"
5 TINES 5 TINES
6 TINES R635 R635 6 TINES
R636 R636

4'0" ROLLER 5'0" ROLLER 6'2" ROLLER 5'0" ROLLER 6'2" ROLLER 5'0" ROLLER 4'0" ROLLER
MR80144R MR80145R MR80146R MR80145R MR80146R MR80145R MR80144R

04-2011
04-2011
SALFORD 41ft RTS

45" 56 1/2" 40 1/2" 37" 37" 40 1/2" 56 1/2" 45"

118" 21" 182" 21" 118"
11" 25" 10" 18 1/2" 19 1/2" 19 1/2" 18 1/2" 11"
12 1/2" 10" 25"

6" 12 1/2" 6" 6"

6 1/2"

5 1/2" 4 1/2" 4 1/2" 5 1/2"

6" 4" 6 1/2" 4"
4 1/2" 4 1/2"

12" 10" 10" 12"

12 1/2" 12 1/2"
26" 11 1/2" 11 1/2" 26"

10" 10"
12" 12"
3" 3"
3" 14" 31" 14" 3"
5" 4 1/2" 4 1/2"
3" 10" 3"
7"
7" 7"
7" 7" 5"
7"
10"
31"
5" 21" 12 1/2" 12 1/2" 21" 5"
21" 21"

Salford Farm Machinery Ltd.

LEGEND
570 27-41ft RTS & RTS XT Assembly and Parts Manual

34 BLADES
100LBS WEIGHT KIT
LAYOUT SHOWS MAXIMUM 70 COULTERS
WEIGHTS ADDED (50LBS/FT) 58 SWIVEL
12 RIGID
NON-SWIVELLING
NOTE:
SPRING MOUNT CENTER COILS
36 BLADES
MAY BE RH OR LH
IMPORTANT!!
NON-SWIVEL SWIVEL KEEP HUBS POINTING
FOR MACHINES WITH BOTH 13 & 8 WAVE COULTERS, OUTWARD. BEGIN IN
USE HARDENED WASHERS INSTALL THE 13 WAVE COULTERS ON THE FRONT, CENTER OF MACHINE
LEAVE BOLT LOOSE TO NOTE WHICH SIDE AND THE 8 WAVE COULTERS ON THE REAR
OF BEAM TO MOUNT
ALLOW SWIVEL. THE COULTER
Return to Contents

Page 69
 Page 70
Return to Contents

SALFORD
41FT 570 RTS COULTER SPACING - DUAL AXLES

45" 56 1/2" 40 1/2" 37" 37" 40 1/2" 56 1/2" 45"

118" 21" 182" 21" 118"
11" 20" 25" 10" 18 1/2" 19 1/2" 19 1/2" 18 1/2" 20" 11"
12 1/2" 10" 25"

6" 12 1/2" 6" 6"

6 1/2"

5 1/2" 4 1/2" 4 1/2" 5 1/2"

6" 4" 6 1/2" 4"
4 1/2" 4 1/2"

10" 10"
12 1/2" 12 1/2"
26" 11 1/2" 26"
11 1/2"

10" 10"
12" 12"
3" 3"
3" 14" 31" 14" 3"
5" 4 1/2" 4 1/2"
3" 10" 3"
7"

7" 7" 7" 5"

7"
10"
31"
5" 7" 12 1/2" 21" 21" 12 1/2" 5"

21" 21"

Salford Farm Machinery Ltd.

570 27-41ft RTS & RTS XT Assembly and Parts Manual

LEGEND 34 BLADES
100LBS WEIGHT KIT
LAYOUT SHOWS MAXIMUM 70 COULTERS
WEIGHTS ADDED (50LBS/FT) 60 SWIVEL
10 RIGID
NON-SWIVELLING
NOTE:
SPRING MOUNT 36 BLADES CENTER COILS
MAY BE RH OR LH
IMPORTANT!!
NON-SWIVEL SWIVEL KEEP HUBS POINTING
FOR MACHINES WITH BOTH 13 & 8 WAVE COULTERS, OUTWARD. BEGIN IN
USE HARDENED WASHERS NOTE WHICH SIDE INSTALL THE 13 WAVE COULTERS ON THE FRONT, CENTER OF MACHINE
AND THE 8 WAVE COULTERS ON THE REAR
LEAVE BOLT LOOSE TO OF BEAM TO MOUNT
THE COULTER
ALLOW SWIVEL.

04-2011
04-2011
Set tine A
rake angle Roller Spring B
Adjuster.
Bolt on
center frame A
B

20" BLADES: USE SLOT (A)

17" BLADES: USE NEXT HOLE DOWN(B)

22"

1" 2 - 3" 1" 1" 2 - 3" 1"

Salford Farm Machinery Ltd.

SALFORD

33 1/2" 21" 53" 40 1/4" 39 1/2" 21" 44" 21" 39 1/2" 40 1/4" 53" 21" 33 1/2"
570 27-41ft RTS & RTS XT Assembly and Parts Manual

4 TINES 5 TINES 6 TINES 4 TINES 3 TINES

41FT 3-SECTION RTS HARROW LAYOUT

3 TINES R635 R636 R634 R633

R633 R634

5'0" ROLLER 6'2" ROLLER 6'2" ROLLER 5'0" ROLLER 6'2" ROLLER 6'2" ROLLER 5'0" ROLLER
MR80145R MR80146R MR80146R MR80145R MR80146R MR80146R MR80145R
Return to Contents

Page 71
Return to Contents 570 27-41ft RTS & RTS XT Assembly and Parts Manual

27’-30’ Wing Fold Hydraulics

H
H

L
10F
(RETRACT)
Rod side GREEN-GREY

9
7R
K

12F
11
Base side GREEN
J

8B
(EXTEND)

H
G

Route hoses along frame

clamps where provided.
F
E

D
B
C

Page 72 Salford Farm Machinery Ltd. 04-2011

 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

27’-30’ Wing Fold Hydraulics

FITTINGS LIST
ITEM QTY. PART NO. DESCRIPTION
NO.
A 1 H00012 3 SECTION WING FOLDING MANIFOLD
B 1 A60079F HYDRAULIC MANIFOLD BRACKET
C 2 B1025 5/8"-11NC x 2 1/2" HEX BOLT
D 2 BN10L 5/8" NYLOCK NUT NC
E 2 B0725 7/16" X 2 1/2" LG. GRADE 5 HEX BOLT
F 2 BN07L 7/16" NYLOCK NUT NC
G 8 H930586 -08M ORB TO -06F NPT SWIVEL
H 12 H951586 -08 ORB TO -06 NPT SWIVEL ELBOW
J 1 HG-PT24E24R21R GREEN EXTEND/GREEN-GREY RETRACT HOSE GRIPS
K 2 H80104P COUPLER 1/2" NPT MALE PIONEER
L 4 HS3524 3 1/2" BORE X 24" STROKE HYD. CYLINDER

HOSE LIST
LABEL QTY LENGTH FROM TO
7R(Green-Grey) 1 20' Tractor Manifold
8B (Green-Green) 1 20' Tractor Manifold
9 2 1'10" Manifold Front Barrel
10F 2 4'5" Manifold Front Rod
11 2 8'5" Manifold Rear Barrel
12F 2 10'5" Manifold Rear Rod

CHARGING FOLD CYLINDERS

Do not connect the cylinder rod until system has been charged with oil.
1. Prop up the cylinder with a block of wood (Fig 1). Check to see that the rod will
extend completely without striking anything.
2. Connect tractor (note: check to see that all cylinders extend and retract in sync.
If one goes backwards, check the plumbing.)
3. Extend cylinders completely, hold lever for 30 sec. as air exits cylinder.
4. Retract cylinder completely, hold lever for 30 sec. as air exits.
5. Repeat steps 3&4 three times.
6. Install cylinder pins. Be sure washers are installed correctly (see fold
cylinder parts page).
Air in the wing cylinder will cause wings to fall tothe ground!!!
Whenever air could have entered the cylinders, repeat the process above to
purge circuit.
ALWAYS UNFOLD WINGS before working on hydraulics!!! Never work on a lift
system with the wings folded

Fig 1. When charging the circuit, prop up

cylinder with block of wood. Be sure the
rod can extend freely without striking
anything.

04-2011 Salford Farm Machinery Ltd. Page 73

Return to Contents 570 27-41ft RTS & RTS XT Assembly and Parts Manual

36’-41’ Wing Fold Hydraulics

H
H

L
10F
(RETRACT)
Rod side GREEN-GREY

9
7R
K

12F
11
Base side GREEN

8B
J
(EXTEND)

H
G

Route hoses along frame

clamps where provided.
F
E

D
B
C

Page 74 Salford Farm Machinery Ltd. 04-2011

 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

36’-41’ Wing Fold Hydraulics

FITTINGS LIST
ITEM QTY. PART NO. DESCRIPTION
NO.
A 1 H00012 3 SECTION WING FOLDING MANIFOLD
B 1 A60079F HYDRAULIC MANIFOLD BRACKET
C 2 B1025 5/8"-11NC x 2 1/2" HEX BOLT
D 2 BN10L 5/8" NYLOCK NUT NC
E 2 B0725 7/16" X 2 1/2" LG. GRADE 5 HEX BOLT
F 2 BN07L 7/16" NYLOCK NUT NC
G 8 H930586 -08M ORB TO -06F NPT SWIVEL
H 12 H951586 -08 ORB TO -06 NPT SWIVEL ELBOW
J 1 HG-PT24E24R21R GREEN EXTEND/GREEN-GREY RETRACT HOSE GRIPS
K 2 H80104P COUPLER 1/2" NPT MALE PIONEER
L 4 HS4036 4" BORE X 36" STROKE HYD. CYLINDER

HOSE LIST
LABEL QTY LENGTH FROM TO
7R (Green-Grey) 1 20' Tractor Manifold
8R (Green-Green) 1 20' Tractor Manifold
9 2 2'6" Manifold Front Barrel
10F 2 6'2" Manifold Front Rod
11 2 8'9" Manifold Rear Barrel
12F 2 11'5" Manifold Rear Rod

CHARGING FOLD CYLINDERS

Do not connect the cylinder rod until system has been charged with oil.
1. Prop up the cylinder with a block of wood (Fig 1). Check to see that the rod will
extend completely without striking anything.
2. Connect tractor (note: check to see that all cylinders extend and retract in sync.
If one goes backwards, check the plumbing.)
3. Extend cylinders completely, hold lever for 30 sec. as air exits cylinder.
4. Retract cylinder completely, hold lever for 30 sec. as air exits.
5. Repeat steps 3&4 three times.
6. Install cylinder pins. Be sure washers are installed correctly (see fold
cylinder parts page).

Air in the wing cylinder will cause wings to fall tothe ground!!!
Whenever air could have entered the cylinders, repeat the process above to
purge circuit.
ALWAYS UNFOLD WINGS before working on hydraulics!!! Never work on a lift
system with the wings folded

Fig 1. When charging the circuit, prop up

cylinder with block of wood. Be sure the
rod can extend freely without striking
anything.

04-2011 Salford Farm Machinery Ltd. Page 75

 Page 76
1A
F D
Return to Contents

E K

(TO TRACTOR)
F
G
1B 1A 6 (RED-GREY)

(TO TRACTOR)
6 (RED) ROUTE HOSES THROUGH F
H 2 RINGS ON TONGE & TRIPOD

J 5
5
F
A H
F E NOTE: TURN CYLINDERS
SO THE PORTS FACE AWAY
LIFTING

FROM THE REAR TIRE

Axle Lift

3 1B
2

A A

Salford Farm Machinery Ltd.

Hydraulics
HYDRAULICS
570 27-41ft RTS & RTS XT Assembly and Parts Manual

3 3

C B B C
5

4 4

# HARDWARE LEAVE A SMALL DROOP ROUTE HOSES ALONG FRAME

5 .OF HOSE OVER WING JOINTS AND CLAMP WHERE PROVIDED
# HOSE

04-2011
 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

HARDWARE LIFTING
Axle LiftHYDRAULICS
Hydraulics
HOSE

CHARGING THE CIRCUIT

ATTENTION ON HARD GROUND, DO NOT RETRACT CYLINDERS ALL THE WAY WHILE
THE TONGUE IS HITCHED TO TRACTOR - OR UNHOOK THE TURNBUCKLE FROM
THE TONGUE TELESCOPE. OTHERWISE, THE TRACTOR DRAWBAR CAN BE BENT
UPWARDS.
Connect only the Barrel end of the cylinders until the circuit has been charged.
1. Be sure that all cylinders can extend completely without striking anything.
Prop with blocks if necessary.
2. Connect Tractor.
3. Extend cylinders and hold lever for 2-3 minutes. This will purge the air from the
circuit. (The lift cylinders have a port that allows oil to pass when completely
extended.)
4. The circuit is now free from air. Install Rod end Pins. Connect tongue Turnbuckle
Whenever air could have entered the cylinders, repeat above steps to
purge circuit
Identify the lift hose ends with red tie wraps for quick hookup to tractor.

Route hoses behind

axle towers
Leave a small droop of hose (3-4")
across wing joint

04-2011 Salford Farm Machinery Ltd. Page 77

Return to Contents 570 27-41ft RTS & RTS XT Assembly and Parts Manual

RTS LIGHT
Light INSTALLATION
Installation
RTS MODELS: 27'- 41' (3 SEC)
10
2

NOTE: RED MUST ALWAYS

FACE THE REAR OF
MACHINE

11 7

8
5
MOUNTING BRACKET
SHARES HARROW
HEAD U-BOLT 4
3
6
NOTE: USE STOVER LOCK NUTS
WHEN MOUNTING LIGHT
BRACKET TO HARROW HEAD

Page 78 Salford Farm Machinery Ltd. 04-2011

 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

Light Installation
RTS LIGHTS INSTALLATION

ITEM NO. QTY. PART NO. DESCRIPTION

1 1 GL767762-AA ORANGE LIGHT
2 1 GL767762-R RED LIGHT
3 1 A60054 LIGHT BRACKET (LONG)
4 1 L00425 OUTSIDE LIGHT MOUNTING PLATE
5 8 BN04L 1/4" LOCK NUT
6 2 BU0410 1/4 x 1 1/2" U-BOLT
7 4 B0410 1/4" NC x 1 1/2" HEX BOLT
8 2 BN10S 5/8" NC STOVER LOCK NUT
9 1 C10726 SINGLE LIGHT BRACKET
10 1 B0812 1/2" x 1 1/4" HEX BOLT
11 1 BN08L 1/2" NYLOCK NUT NC
NOTE: HAVE SOMEONE WATCHING FOR COLLISIONS WHEN FOLDING
FOR THE FIRST TIME

NOTE: LINE UP END OF BRACKET WITH OUTSIDE OF AMBER LIGHT

THIS WILL PREVENT COLLISION WHILE FOLDING.

04-2011 Salford Farm Machinery Ltd. Page 79

Return to Contents 570 27-41ft RTS & RTS XT Assembly and Parts Manual

SlowMOVING
SLOW Moving VEHICLE
Vehicle Sign and
SIGN Rear
AND Parking STAND
PARKING Stand
INSTALLATION

NOTE: SMV and Parking Stand

should be near center of machine,
but careful not to hit Harrow Heads

4
3

9
10

6 4
1 2

ITEM QTY PART NUMBER DESCRIPTION

NO.
1 1 GAP103NS SMV SIGN
2 1 C1011 SMV MOUNTING BRACKET
3 3 BU1061 U-BOLT 5/8" x 6" x 5 1/2"
4 6 BN10L 5/8" NYLOCK NUT NC
5 2 BN06L 3/8"-16NC LOCK NUT
6 2 B0610 3/8" X 1" LG. GRADE 5
7 1 C5507 REAR PARKING STAND MOUNT FOR 6" BEAM
8 1 C5508 550 PARKING STAND
9 1 GP100414C03 5/8'' dia x 4 1/4'' pin RING & WASHER
10 1 GHP11 #11 HAIR PIN

Page 80 Salford Farm Machinery Ltd. 04-2011

 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

Transport Lock
 IW:,1*)2/'/2&.
,7(0 47< 3$5712 '(6&5,37,21
  & :,1*)5$0(:,1*/2&.%5$&.(7
  / 0$,1)5$0(:,1*/2&.%5$&.(7
  *3& 5,1* :$6+(5:,1*/2&.3,1
  %8 8%2/7[[
  %1/ 1</2&.1871&
  *+3 +$,53,1

,7(06$9$,/$%/($6.,7&




8VHORZHUKROH

WRVWRUHSLQ






04-2011 Salford Farm Machinery Ltd. Page 81

 Page 82
Tie strap along hydraulic hoses.
Return to Contents

F D F D

3-section (single-fold) frame

2 1 1 2 F
Grease Bank

Salford Farm Machinery Ltd.

E 5 5 E
570 27-41ft RTS & RTS XT Assembly and Parts Manual

D F
F 2 D 2

(2 per center axle

F 1 on 50ft) 1
3 4 4 E 3 F
E
5-section (double fold) frame
The secondary wing hinges
are greased. C
B

04-2011
 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

Grease Bank

HOSES

HOSE 18 - 30ft 41ft Single fold 41ft Double fold 50ft Double fold
LABEL Machine Machine Machine Machine

#1 6' 3" 6' 3" 4' 4'

#2 12' 6" 17' 11' 12' 6"
#3 ---------- ---------- 23' 27'
#4 ---------- ---------- 15' 16' 6"
#5 ---------- ---------- 19'6" 21' 6"
KIT PART# KIT PART# KIT PART# KIT PART#
H5724G H5740G H5741G H5750G
2006 and Prior 2006 and Prior 2006 and Prior 2006 and Prior
H5724G-1 H5740G-1 H5741G-1 H5750G-1

HARDWARE
ITEM PART NO. DESCRIPTION
A L00734 BRACKET FOR SINGLE FOLD
B A60072 BRACKET FOR DOUBLE FOLD
C BU1061 5/8 x 4 x 6" U-CLAMP
D 5000-2 Coupling
E 5502-2 1/8" Elbow - 90
F 5503-2 1/8" Elbow - 45

Single-fold machine shown here.

04-2011 Salford Farm Machinery Ltd. Page 83

Return to Contents 570 27-41ft RTS & RTS XT Assembly and Parts Manual

Tow Hitch Installation (27ft. - 30ft.)


72:+,7&+,167$//$7,21
,7(012 47< 3$5712 '(6&5,37,21
  & 
72:+,7&+
  %8 8%2/7[[/*
  % 1&[+(;%2/7
  %1/ 1</2&.1871&
  *363(&& 5,1* :$6+(572:+,7&+635,1*3,1
  & 72:+,7&+3,1635,1*
  *0 0$&+,1(%86+,1*
  %65 ;52//3,1
  7 $,56(('(572:+,7&+&/(9,6
  *3% [/*3,1+2/(
  & 72:+,7&+,16(57
  *) 137*5($6(),77,1*
  % ;/**5$'(
  %1/ 1&/2&.187
127(&203/(7(72:+,7&+.,7$9$,/$%/($63$570&











 
 


 


Page 84 Salford Farm Machinery Ltd. 04-2011

 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

Tow Hitch Installation (36ft. - 41ft.)


72:+,7&+,167$//$7,21
,7(012 47< 3$5712 '(6&5,37,21
  & 
6(&7,2172:+,7&+
  %8 8%2/7[[/*
  %1/ 1</2&.1871&
  *363(&& 5,1* :$6+(572:+,7&+635,1*3,1
  & 72:+,7&+3,1635,1*
  *0 0$&+,1(%86+,1*
  %65 ;52//3,1
  7 $,56(('(572:+,7&+&/(9,6
  *3% [/*3,1+2/(
  & 72:+,7&+,16(57
  *) 137*5($6(),77,1*
  % ;/**5$'(
  %1/ 1&/2&.187
  % 1&[+(;%2/7
127(&203/(7(72:+,7&+.,7$9$,/$%/($63$570&:








 






04-2011 Salford Farm Machinery Ltd. Page 85

Return to Contents 570 27-41ft RTS & RTS XT Assembly and Parts Manual

Tow Hitch Hydraulics (Independent or Shared)

A A
C C

(BLACK GREY) (BLACK)

RETURN FEED

Double stack hoses with

existing wing hydraulic hoses

ITEM # QTY PART # DESCRIPTION

A 2 H80104P 1/2" NPT MALE COUPLER
B 2 H42504P 1/2" NPT FEMALE COUPLER
PAIR OF BACK\BLACK
C 1 HG-PT23E23R21R GREY HOSE GRIPS
FEED
Hose kit for tow hitch to tractor
RETURN available as part # MC573T
B

Page 86 Salford Farm Machinery Ltd. 04-2011

 570 27-41ft RTS & RTS XT Assembly and Parts Manual Return to Contents

Remove 'TEE' connectors at right-

hand front fold cylinder and
replace with cross connectors (as
shown)

FEED

RETURN A

RETURN-
FROM TOW HITCH
FEED-
TO TOW HITCH

Double stack hoses and

use existing hose clamps

ITEM # QTY PART # DESCRIPTION

A 2 HT06SC 3/8" SWIVEL CROSS
B 2 H42504P 1/2" NPT FEMALE COUPLER

Hose kit for tow hitch to tractor

available as part # MC573W
FEED
RETURN
B

04-2011 Salford Farm Machinery Ltd. Page 87



SalfordFarmMachineryLtd.
364018McBethRoad,N0J1W0
Salford,OntarioCanada
www.salfordmachine.com
1Ͳ866Ͳ442Ͳ1293