ANDERSON GREENWOOD

INSTRUMENTATION PRODUCTS

Manifolds and
Accessories

Flow Manifolds
Static Pressure Manifolds
Liquid Level Manifolds

Anderson Greenwood is the industry leader in instrument valve technology and

the original innovator of the 3-valve manifold. Our capabilities include over 50
years of research, design and manufacture of instrumentation products. Our
products are designed to be maintenance free, and are offered with numerous
configurations, materials, end connections and special requirements.

Anderson Greenwood Instrumentation Products is a registered trademark of Tyco

International Services AG or its affiliates in the United States and/or other countries.
All other brand names, product names, or trademarks belong to their respective holders.
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Contents

Bonnet Technology

Soft and Metal Seated Bonnet Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1

Mini-Valve Bonnet Assembly . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2

Static Pressure Manifolds

M4AP and M4TP

Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
M4AP Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
M4TP Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Materials, Pressure and Temperature Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . 6-7
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
ASME B31.1 or B31.3 Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9

MP1 and MP2 Manifold

Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
MP1 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
MP2 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Materials, Pressure and Temperature Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . 13 - 14
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14

PTM and PT7 2-Valve Manifolds

Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
PTM Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
PTMV Dimensions, Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
PT7 Dimensions, Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
Pressure and Temperature Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 19 - 20
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20 - 21
ASME B31.1 or B31.3 Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 22

A30 2-Valve Manifold

Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Materials, Pressure and Temperature Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26

M25, M25A, M25B, M251 and M251B Manifolds

Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
M25 and M251 Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
M25A Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
M25B and M251B Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Pressure and Temperature Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33 - 34

MM2
Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
Dimensions, Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Pressure and Temperature Ratings, Ordering Information . . . . . . . . . . . . . . . . . . 37
AGCO Mount Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

i
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Liquid Level Manifolds

M4TL 2-Valve Manifold

Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Dimensions, Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
Pressure and Temperature Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
AGCO Mount Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43

Differential Pressure Manifolds

M1 and M110 3-Valve Manifold

Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
M1 Dimensions, Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 - 46
Pressure and Temperature Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45 - 47
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 48 - 49
ASME B31.1 or B31.3 Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 50
M110 Dimensions, Materials, Pressure and Temperature Ratings . . . . . . . . . . . . 51 - 52
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 52

MM1 3-Valve Mini-Manifold

Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 53
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 54
Materials, Pressure and Temperature Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . 55 - 56
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 56

A22N Manifold
Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 57
Dimensions, Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Pressure and Temperature Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 59
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60

M3A Equalizer Manifold

Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
Dimensions, Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Pressure and Temperature Ratings, Ordering Information . . . . . . . . . . . . . . . . . . 63

M4A and M4T 3-Valve Manifolds

Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
M4A Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
M4T Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Materials, Pressure and Temperature Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . 67 - 68
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69 - 70
ASME B31.1 or B31.3 Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 71

M45A 3-Valve Manifold

Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 72
Materials, Pressure and Temperature Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . 73
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 75

AX3A and AX3T 3-Valve Manifolds

Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 76
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77
Materials, Pressure and Temperature Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . 78
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 79
AGCO Mount Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 80

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

ii
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

M20 Meter Manifold

Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 81
Dimensions, Materials, Pressure and Temperature Ratings . . . . . . . . . . . . . . . . . 82 - 83
Operation Sequence . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 83
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 84

M24 5-Valve Manifold

Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 85
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 86
Materials, Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 87
Pressure and Temperature Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 88
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 89
ASME B31.1 or B31.3 Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 90

A26 5-Valve Manifold

Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 91
Dimensions, Materials, Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 92
Pressure and Temperature Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 93
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 94

MDP 5-Valve Manifold

Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 95
Dimensions, Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 96
Pressure and Temperature Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 97
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 98

DPM 5-Valve Manifold

Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 99
Dimensions, Materials, Pressure and Temperature Ratings . . . . . . . . . . . . . . . . . 100
ASME B31.1 or B31.3 Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 101

MM5 5-Valve Manifold

Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 102
Dimensions, Materials . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 103
Pressure and Temperature Ratings, Ordering Information . . . . . . . . . . . . . . . . . . 104

Integral Manifolds

MC and MT
Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 105
MC2 Dimensions, Materials, Pressure and Temperature Ratings . . . . . . . . . . . . . 106
MC3 Dimensions, Materials, Pressure and Temperature Ratings . . . . . . . . . . . . . 107
MC5G Dimensions, Materials, Pressure and Temperature Ratings . . . . . . . . . . . . 108
MC5P Dimensions, Materials, Pressure and Temperature Ratings . . . . . . . . . . . . 109
MT2 Dimensions, Materials, Pressure and Temperature Ratings . . . . . . . . . . . . . 110
MT3 Dimensions, Materials, Pressure and Temperature Ratings . . . . . . . . . . . . . 111
Pressure vs. Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 112
AGCO Mount Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 113
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 114 - 115
ASME B31.1 or B31.3 Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 116

MB
Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 117
MB Dimensions, Materials, Pressure and Temperature Ratings . . . . . . . . . . . . . . 118 - 121
Pressure vs. Temperature . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
AGCO Mount Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 122
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 123
ASME B31.1 or B31.3 Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 124

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

iii
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

IMSA and IMST

Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 125
IMSA Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 126
IMST Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 127
Materials, Pressure and Temperature Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . 128 - 129
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 130
ASME B31.1 or B31.3 Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . 131

Natural Flow Gas Manifolds

M6A, M6T, M6TA 5-Valve Manifolds

Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 132
M6A Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 133
M6T Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 134
M6TA Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 135
Materials, Pressure and Temperature Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . 136 - 137
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 138

M63A, M65T, M65A 5-Valve Manifolds

Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 139
M63A Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 140
M65A Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 141
M65T Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 142
Materials, Pressure and Temperature Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . 143 - 144
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 145
AGCO Mount Kits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 146 Notes
M19 Meter Manifold 1. IntelliMount™ is a trademark of Anderson
Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 147 Greenwood, patented.
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 148 2. Bonnet Lock is a patent held by Anderson
Materials, Pressure and Temperature Ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . 149 Greenwood.
Ordering Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 150 3. Delrin®, Kel-F®, Teflon® and Velcro® are all
registered trademarks of E.I. Du Pont de
Nemours and Company.
Distribution Manifolds 4. Rosemount® is a registered trademark of
Rosemount, Inc.
ADME
5. Multivariable™ and Coplanar™ are
Product Overview – Features and Benefits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 151
trademarks of Rosemount, Inc.
Dimensions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 152
6. Hastelloy® is a registered trademark of
Materials, Pressure and Temperature Ratings, Ordering Information . . . . . . . . . . 153
Haynes International, Inc.
7. Incoloy®, Inconel® and Monel® are registered
Accessories trademarks of Special Metals Corporation.
8. Elgiloy® is a registered trademark of Elgiloy
Bonnet Lock . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154 Specialty Metals.
Seat Resurfacing Tool . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 154 9. GRAFOIL® is a registered trademark of
Rod-Out Device . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 155 Graftech, Inc.
10. Viton® is a registered trademark of DuPont
ASME Codes Performance Elastomers.
ASME B31.1 Code Requirements . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 156

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

iv
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Bonnet Technology

Soft-Seated Bonnet Assembly

H1 PTFE
The soft-seated bonnet assembly has a
one-piece rotating stem and plug. The Weather Resistant
Handle Assembly
stem threads are rolled and lubricated to Plastic Cap
prevent galling and reduce operating
torque. Available with a patented PTFE
packing gland, which is adjustable in
Adjustable Rolled Stem Threads
service, or with a Viton® O-ring and PTFE Packing Gland
back-up ring. A protective dust cap is fitted
to contain stem lubricant and prevent the Stem Packing Below
influx of contaminants. The standard hand the Threads
Back Seat Design
valves have either 3/16-inch [4.8 mm] or
1/4-inch [6.4 mm] diameter orifice size. Bonnet Lock Pin
All bonnets are assembled with a bonnet
locking pin to prevent accidental removal
while in service.
Bubble-tight Shutoff
Bonnet-to-Body Metal
Seal
Metal-Seated Bonnet Assembly
The metal-seated bonnet assembly has
a rotating stem with free swivel ball-type
seat for long service life. The stem threads
are rolled and lubricated to prevent galling H7 PTFE
and reduce operating torque. The stem
seal is a patented PTFE packing gland Handle Assembly
which is adjustable in service. A protective
dust cap is fitted to contain stem lubricant
and prevent the influx of contaminants. Weather Resistant Plastic Cap
(PTFE Packed only)
The specially hardened ball seat is ideal for
both gas and liquid service. All bonnets are Stem Packing Below the Threads
assembled with a bonnet locking pin to
prevent accidental removal while in service. Bonnet Lock Pin

The 10,000 psig [689 barg] bonnet

assembly uses a strengthened stem and
bonnet. The stem seal is a patented PTFE Bonnet-to-Body Metal Seal
packing gland which is adjustable in
service. A protective dust cap is fitted to
contain stem lubricant and prevent the
influx of contaminants. This bonnet is also
fitted with a larger size T-bar handle.
H7 GRAFOIL®
The high-temperature bonnet assemblies
Rolled Stem Threads
utilizes a similarly designed stem and
bonnet, and incorporates adjustable
GRAFOIL® O-rings and back-up pressure Adjustable Packing Gland
rings to ensure a leak-free stem seal.
Panel Nut
(Optional, GRAFOIL® only)

Back Seat Design

Bubble-tight Shutoff

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

1
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Bonnet Technology, continued

Mini-Valve Bonnet Assembly

The mini-valve bonnet assembly has a
compact design with a one-piece rotating
stem which is ‘V’ tipped with a shoulder for
use as a metal or soft seated valve. The
stem threads are rolled and lubricated to
PTFE Stem Packing
prevent galling and reduce operating
torque.

The mini-valve bonnet comes in three

designs. An adjustable PTFE stem packed
bonnet is suitable for panel mounting via
external bonnet threads. The O-ring bonnet
Metal Seat for High Temperature
Applications
assemblies use a Viton® O-ring seal below
the stem thread.

A GRAFOIL® packed bonnet suitable for

temperatures of up to 500°F [260°C] is
available for SS valves only.

Arctic Lube
PTFE
The low temperature rating for standard
Anderson Greenwood carbon steel and
316 stainless steel instrumentation
products is -20°F [-28°C] (standard
products - standard lubrication). Our
O-ring –AL (Arctic Lube) option extends the lower
temperature limit to -70°F [-57°C] on all
stainless steel models.

O-ring Stem Seal

Soft Seat Flow Washer

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

2
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – M4AP and M4TP Manifolds

Product Overview
The M4AP and M4TP are block and bleed,
static pressure manifolds. They are
designed for use with DP-style pressure
transmitters.

The manifold’s two valves have free-

swiveling, ball-ended stems or soft seats.
The block valve isolates the instrument
from the process and is open during normal
operation. When the block valve is closed,
the bleed valve can be opened to vent
pressure from the transmitter.
M4TP
The M4AP permits the transmitter’s futbol
flange to connect the process signal
line to the manifold directly, with either a
1/2-inch pipe or tubing connection. The
Features and Benefits • Immediate installation with AGCO
M4TP has a 1/2-inch NPT inlet connection.
• Cost savings when manifolding the Mount’s manifold, steam block, bracket,
A 1/4-inch NPT purge connection is
instruments. This eliminates several and all associated piping can be
available. The 1/4-inch NPT vent port may
parts used in conventional methods of installed without the instrument at the
be used for testing calibration. They may be
‘piping up’ resulting in cost reduction of time of plant construction.
mounted using the AGCO Mount option for
ease of assembly and maintenance. 20-30 percent.
• Secure mounting is provided by the
• Compact design requires minimum AGCO Mount. Instrument piping stability
space for operation and installation. is enhanced when directly supported by
the pipe stand through the manifold.
• Fewer leak points reduce leakage by
having fewer parts to assemble. • All valve threading is isolated.
Packing is below stem threads, body-
• Free-swiveling ball end stem (metal to-bonnet seal is below the threads
seat) assures bubble-tight valve closure eliminating process fluid corrosion.
without seat galling.
• Less instrument damage with the
• The AGCO Mount provides easy AGCO Mount. The instrument can be
instrument removal. Direct bolting to safely warehoused until final ‘loop’
the manifold allows the instrument to be checkout, reducing the chances of
removed independently of the piping. damage during construction.
This facilitates repairs, service, and
calibration.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

3
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – M4AP Specifications

Metal Seat (Soft Seat available) Dimensions, inches [mm]

0.64 [16.3] 0.20 [5.1] Full R. 4 Places
2.12 0.48 [12.2] TYP.
[53.8]

2.40
[61.0]

ø 0.48 [12.2] 0.81 [20.6]

Mounting Holes
4 Places 1.62 [41.1]

1/4
- 18 NPT
Vent/Test Port
B Max. Open 3.40 [86.4] A Max. Open
Instrument Side

2.38 1.57
[60.4] [39.9]
2.28
[57.9]

0.68 [17.3]
3.75
Block/Isolate [95.3]
Valve Vent Valve
ø 0.38 [9.6]
Process Mounting Hole
0.30 [7.6] 1.40
Side 3 Places 1/4 - 18 NPT
[35.6]
Vent/Test Port
2.80 [71]

Instrument
Dimensions, inches [mm] Note
Packing A B 1. Approximate valve weight: 4.4 lb [2.0 kg].
Metal seat:
3.14 2.60 0.156-inch [4 mm] diameter orifice. Vent/Test
Teflon®
[79.8] [66.0] Valve Cv 0.36 maximum.
GRAFOIL® 3.79 3.25 Soft seat:
Low Emissions Graphite [96.3] [82.6] 0.187-inch [4.8 mm] diameter orifice. Block/Isolate
Valve Cv 0.83 maximum.

Process

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

4
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – M4TP Specifications

Metal Seat (Soft Seat available) Dimensions, inches [mm]

0.64 [16.3] 0.22 [5.6]
2.12 0.48
[53.8] [12.2] TYP.

2.40 [61.0]
0.81 [20.6]
1.62
[41.1]

ø 0.48 [12.2] For transmitters having bolt

Mounting Holes spacing greater than
4 Places 2.12 [53.8]

1/4 - 18 NPT

Vent/Test Port
B Max. Open 3.40 [86.4] A Max. Open
Instrument Side

2.38 1.64
[60.4] [41.7]
2.41
[61.2]

0.94 [23.9] 3.68

[93.5]
Block/Isolate Valve Vent Valve

1/4 - 18 NPT
1/2- 14 NPT ø 0.38 [9.6] Mounting Holes Vent/Test Port
Process Port 2 Places

Instrument Dimensions, inches [mm] Note

Packing A B 1. Approximate valve weight: 4.2 lb [1.9 kg].
Metal seat:
3.14 2.60 0.156-inch [4 mm] diameter orifice.
Vent/Test Teflon®
[79.8] [66.0] Valve Cv 0.36 maximum.
GRAFOIL® 3.79 3.25 Soft seat:
Low Emissions Graphite [96.3] [82.6] 0.187-inch [4.8 mm] diameter orifice.
Block/Isolate
Valve Cv 0.83 maximum.

Process

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

5
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – M4AP and M4TP

Specifications
Standard Materials
Valve Body Bonnet Stem Ball Bolts Packing
CS1 A576-10L18 A108 A581-303 17-4 PH A193-B7 Teflon®
CS1 A576-10L18 A105 A581-303 17-4 PH A193-B7 GRAFOIL®
316 SS A479-316 A479-316 A276-316 316 SS A193-B7 Teflon®
316 SS A479-316 A479-316 A276-316 316 SS A193-B7 GRAFOIL®
SG2 A479-316 A479-316 Monel® 400 Monel® K500 A193-B7 Teflon®
Monel® Monel® 400 Monel® R405 Monel® 400 Monel® K500 A193-B7 Teflon®
Hastelloy® Hastelloy® Hastelloy®
SG33 Elgiloy® A193-B7 Teflon®
C276 C276 C276

Pressure and Temperature Ratings4

Packing Valve Seat Pressure and Temperature Ratings
Teflon® CS, SS Delrin® 6000 psig @ 200°F [414 barg @ 93°C]
6000 psig @ 200°F [414 barg @ 93°C]
Teflon® CS, SS PEEK
2000 psig @ 400°F [138 barg @ 204°C]
1000 psig @ 150°F [69 barg @ 66°C]
Teflon® CS, SS Teflon®
200 psig @ 500°F [14 barg @ 260°C]
6000 psig @ 200°F [414 barg @ 93°C]
Teflon® CS, SS Integral
4000 psig @ 500°F [276 barg @ 260°C]
5300 psig @ 200°F [365 barg @ 93°C]
Teflon® Monel® Integral
4200 psig @ 500°F [290 barg @ 260°C]
GRAFOIL®/
6000 psig @ 200°F [414 barg @ 93°C]
Low Emissions CS Integral
4000 psig @ 600°F [276 barg @ 316°C]
Graphite
GRAFOIL®/
6000 psig @ 200°F [414 barg @ 93°C]
Low Emissions SS Integral
1500 psig @1000°F [103 barg @ 538°C]
Graphite

Notes
1. CS is zinc cobalt plated to prevent corrosion.
2. SG (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and
NACE MR0103-2005.
3. SG3 (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm]).
4. 316 SS bolts lower pressure ratings to a
maximum of 4500 psi [310 barg]. Consult
factory for full rating with 316 SS bolts.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

6
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – M4AP and M4TP

Specifications
Notes Pressure vs. Temperature – Soft Seat
1. PCTFE (Polychlorotrifluoroethylene) is the
exact equivalent of Kel-F®.
2. 316 SS bolts lower pressure ratings to a Teflon®
maximum of 4500 psi [310 barg]. Consult 6000 PEEK
factory for full rating with 316 SS bolts. [414] Delrin®
PCTFE
5000 Denotes
[345] intersecting
data

Pressure psig [barg]

4000
[276]

3000
[207]

2000
[138]

1000
[69]
200
[14] 0
0 100 200 300 400 500
[-18] [38] 150 [93] [149] [204] [260]
[66]
Temperature °F [°C]

Pressure vs. Temperature – Metal Seat

M4__HIW
6000 M4__HIC
[414]
5300 M4__HIS
[365] M4TPVIM
5000 M4__VIC
[345] M4__VIS
4200 M4__VIM
Pressure psig [barg]

[290] 4000
Denotes
[276]
intersecting
data
3000
[207]

2000
[138]
1500
[103]
1000
[69]

0 100 200 300 400 500 600 700 800 900 1000
[-18] [38] [93] [149] [204] [260] [316] [371] [427] [482] [538]

Temperature °F [°C] 850

[454]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

7
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – M4AP and M4TP

Specifications
Ordering Information Note
M4TP V D C –4 – AM 1. 316 SS bolts lower pressure ratings to a
maximum of 4500 psi [310 barg]. Consult
factory for full rating with 316 SS bolts.
Valve Type
M4AP – Flange x Flange
M4TP – FNPT x Flange

Bonnet Packing
V – Teflon® (Soft and Integral seats)
H – GRAFOIL® (Integral seat only)
E – Low Emissions Graphite
(Integral seat only)

Seat Material
D – Delrin® (standard)
V – Teflon®
E – PEEK
K – PCTFE (Polychlorotrifluoroethylene) is the
exact equivalent of Kel-F®
I – Integral (body material)

Body Material
C – CS
S – 316 SS
M – Monel®
W – 316L SS
J – Hastelloy®

Process Connections
4 – 1/2-inch FNPT (M4TP only)

Options
AL – Arctic Lubricant (low temperature service -70°F) - not available for CS valves
AM – AGCO Mount Kit for 2-inch pipe stand mounting of manifold (page 38)
BC – Accessory bracket for mounting conduit with AGCO Mount
BP – Accessory bracket for mounting purge meters with AGCO Mount
CL – Cleaned for chlorine service
HD – Hydrostatic testing (100 percent) (MSS SP-61)
OC – Cleaned for oxygen service
PB – Bottom purge port (Metal Seat only)
R3V – Add for use with Rosemount® Model 3051C (SS 18-8 Bolts)
SB – Steam Block (CS)
SSA1 – SS Flange Bolt (grade 18-8) - maximum pressure rating 4500 psi [310 barg]
SSB – 316 SS Flange Bolt (B8M Class 2) - will provide full pressure rating
SSC1 – 316 Flange Bolt (B8M) - maximum pressure rating 4500 psi [310 barg]
SG – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and NACE MR0103-2005
SG3 – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm])
SP – Special Requirements - please specify

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

8
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – M4TP ASME B31.1 or

B31.3 Specifications Meets MSS SP-1053
Ordering Information – Power Industry Applications1
M4TPHP S –4 –XP – AM

Valve Type
M4TPHP

Body Material
C – CS, A105
S – 316 SS
W – 316L SS
J – Hastelloy®

Process Connections (Process x Instrument x Vent)

4 – 1/2-inch FNPT
4AT – Integral 1/2-inch Single Ferrule Tube Fittings
316 SS Ferrule and Nut
4ATD – Integral 1/2-inch Dual Ferrule Tube Fittings
316 SS Ferrule and Nut
4TB – 1/2-inch Tube S.W. x Flange x 1/4-inch FNPT

Options
AM – AGCO Mount Kit for 2-inch pipe stand mounting of manifold (page 38)
R3V – Add for use with Rosemount® Model 3051C (SS 18-8 Bolts)
SB – Steam Block (CS)
SSA4 – SS Flange Bolt (grade 18-8) - maximum pressure rating 4500 psi [310 barg]
SSB – 316 SS Flange Bolt (B8M Class 2) - will provide full pressure rating
SSC4 – 316 Flange Bolt (B8M) - maximum pressure rating 4500 psi [310 barg]
SP – Special Requirements - please specify

Notes
1. All Manifolds come standard with GRAFOIL®
packing, integral seats, bonnet locks, and are
subjected to hydrostatic testing.
2. Manifold ratings:
SST
6000 psig @ 100°F [414 barg @ 38°C]
3030 psig @ 1000°F [209 barg @ 538°C]
STL
6170 psig @ 100°F [425 barg @ 38°C]
3430 psig @ 800°F [236 barg @ 427°C]
3. See page 156 for Code Requirements.
4. 316 SS bolts lower pressure ratings to a
maximum of 4500 psi [310 barg]. Consult
factory for full rating with 316 SS bolts.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

9
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – MP1 and MP2

MP1

MP2

Product Overview • Compact design requires minimum

The MP1 is a two-valve pressure manifold space for operation and installation.
used for single instrument applications,
• Immediate installation with the
such as block and bleed, test and
AGCO Mount. Steam block, bracket,
calibration, and instrument zeroing. It
and all associated piping can be
serves as both manifold and mount in
installed without the instrument at the
one unit.
time of plant construction. Thus, there is
The MP2 is a pressure manifold designed to no work stoppage pending instrument
mount two different pressure instruments delivery.
simultaneously from a single pressure
• The AGCO Mount provides secure
source. It has dual block and bleed valves,
mounting. Instrument piping stability is
each operating independently of the other.
enhanced when directly supported by
The MP2 serves as both manifold and
the pipe stand through the manifold.
mount in one unit.
• All block valve threading is isolated.
The block valves have free-swiveling, ball
Packing is below the stem threads and
ended stems used to isolate the pressure
seal is below body-to-bonnet threads,
devices from the process. During normal
keeping corrosion to a minimum.
operation the block valves are open.
However, when either valve is closed, the • Free-swiveling ball end stem design
respective bleed valve can be used to vent assures bubble-tight valve closure
pressure from the isolated instrument. without seat galling.

The pressure instruments are connected to • Lower piping costs occur when two
the manifold with 1/2-inch FNPT union instruments are mounted on the same
connectors or 1/2-inch MNPT union manifold and pipe stand.
connectors.
• Less instrument damage with the
Features and Benefits AGCO Mount. The instrument can be
• Cost savings when manifolding the safely warehoused until final ‘loop’
instruments. This eliminates several checkout, reducing the chances of
parts used in conventional methods of damage during construction.
‘piping up’ resulting in cost reduction of • Fewer leak points reduces leakage by
20-30 percent. having fewer parts to assemble.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

10
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – MP1 Specifications

Dimensions, inches [mm]

1/2 - 14 FNPT

Instrument Connection

4.50 Block/Isolate
[114.3] Valve
Max.
1/4 - 18 NPT
1/2 -14 NPT

1.375
Vent/Test [34.9]
Valve

MP1 Pressure Mount

1/2 -14 NPT

1 /2 - 14 MNPT
Instrument Process Connection
Connection
A

MP1 and MP2

Steam Block
Rain Rain
Cap Cap

5.38
[136.7]
Max.

Close-couple Futbol Male Outlet B Max.

Open 1.25 [31.8] 0.75 [19.1]
(option –44)
2-inch Pipe

Instrument
Dimensions Notes
Packing A B 1. Pressure seal between union connectors and
Vent/Test manifold body is Viton® O-ring for Teflon®
5.62 3.85 packed valves, GRAFOIL® for GRAFOIL®
Teflon®
[142.7] [97.8] packed valves.
Block/Isolate GRAFOIL®/ 2. Approximate valve weight: 6.0 lb [2.72 kg].
8.20 4.50 0.187-inch [4.8 mm] diameter orifice.
Low Emissions
[208.3] [114.3] Valve Cv 0.52 maximum.
Graphite

Process

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

11
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – MP2 Specifications

(Patented)
Dimensions, inches [mm]
Instrument Connections
1 /2 1/4 - 18 NPT
- 14 NPT TYP.
2 Places 4.16 Vent/Test
[105.7] 2 Places

4.50
[114.3]
Max.

Block/Isolate
Block/Isolate Valve
Valve 1 /2 MP2 Dual Pressure Mount
- 14 NPT
1 /4
- 18 NPT Process Inlet
2 Places
1/2 - 14 MNPT
A
Instrument
Connection

Dimensions, inches [mm] Rain Cap

Packing A B
9.81 3.85
Teflon®
[105.7] [97.8]
GRAFOIL®/
13.98 4.50
Low Emissions
[355.1] [114.3]
Graphite

5.38
[136.7]
Max.
Notes
1. Pressure seal between union connectors 1.25 [31.8] Close-couple Futbol Male Outlet
and manifold body is Viton® O-ring for
B (option FB1)
Teflon® packed valves, GRAFOIL® for
Max. Open
GRAFOIL® packed valves.
2-inch Pipe
2. Approximate valve weight: 10.0 lb [4.54 kg].
0.187-inch [4.8 mm] diameter orifice.
Valve Cv 0.52 maximum.
Vent/Test Vent/Test

Block/Isolate Block/Isolat

Process

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

12
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – MP1 and MP2 Specifications

Notes Standard Materials – MP1

1. CS parts are zinc cobalt plated to prevent Valve Body Bonnet Stem/Ball Stem Vent/Test Bolts
corrosion. (Block Valve) (Bleed Valve) Valve
2. SG (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum 2 A581-303 Stem
CS1 A105 A108 A581-303 A1053 A193-B7
(for Chloride conditions ≤ 50 mg/l [ppm]) and 17-4 Ball
NACE MR0103-2005. A276-316 Stem
SS A479-316 A479-316 A276-316 A479-316 A193-B7
3. Teflon® packed bleed valve body is 10L18 316 SS Ball
steel.
Monel® 400 Stem
4. Stem is Monel® 400 for hot packed bonnets. SG2 A479-316 A479-316 Monel® R405 A479-316 A193-B7
Monel® K-500 Ball
5. SG3 (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum 2
Monel® Monel® 400 Stem
Monel® Monel® 400 Monel® R405 Monel® A193-B7
(for Chloride conditions > 50 mg/l [ppm]). R405 Monel® K-500 Ball
Hastelloy® Hastelloy® Hastelloy® C276
SG35 Hastelloy® Hastelloy® A193-B7
C276 C276 Elgiloy®

Standard Materials – MP2

Valve Body Bonnet Stem/Ball Stem Vent/Test Bolts
(Block Valve) (Bleed Valve) Valve
A581-303 Stem
CS1 A108 A108 A581-303 A1053 A193-B7
17-4 Ball
A276-316 Stem
SS A479-316 A479-316 A276-316 A479-316 A193-B7
316 SS Ball
Monel® 400 Stem
SG2 A479-316 A479-316 Monel® 4054 A479-316 A193-B7
Monel® K-500 Ball
Hastelloy® Hastelloy® Hastelloy® C276
SG35 Hastelloy® Hastelloy® A193-B7
C276 C276 Elgiloy®

Pressure and Temperature Ratings

Valve Packing Ratings
CS1, SS 6000 psig @ 200°F [414 barg @ 93°C]
Teflon®
and SG2 4000 psig @ 400°F [276 barg @ 204°C]
GRAFOIL®/Low 6000 psig @ 200°F [414 barg @ 93°C]
CS1
Emissions Graphite 1500 psig @ 850°F [103 barg @ 454°C]
SS GRAFOIL®/Low 6000 psig @ 200°F [414 barg @ 93°C]
SG2 Emissions Graphite 1500 psig @ 1000°F [103 barg @ 538°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

13
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – MP1 and MP2 Specifications

Pressure vs. Temperature Note

1. MP1 and MP2 includes U-bolt and nuts for
MP__HIS 2-inch pipe mounting.
6000 MP__EIS
[414] MP__HIC
MP__EIC
5000
MP__VIC
Pressure psig [barg]

[345]
MP__VIS
MP__VIM
4000
[276] Denotes
intersecting
data
3000
[207]

2000
[138]
1500
[103]
1000
[69]

0
0 100 200 300 400 500 600 700 800 900 1000
[-18] [38] [93] [149] [204] [260] [316] [371] [427] [482] [538]
850
Temperature °F [°C] [454]

Ordering Information

MP1 V I C –4 – BC

Model
MP1 – Pressure Manifold MP2 – Pressure Manifold
(one instrument) (two instruments)

Packing
V – Teflon® H – GRAFOIL® E – Low Emissions Graphite

Seat
I – Integral (body material)

Body Material
C – CS S – 316 SS M – Monel® W – 316L SS J – Hastelloy®

Connections
4 – 1/2-inch FNPT Process x 1/2-inch FNPT Instrument
44 – 1/2-inch FNPT Process x 1/2-inch MNPT Instrument (MP1 only)
4–FB1 – MP2 with 1 each 1/2-inch MNPT Process x 1/2-inch FNPT Instrument

Options1
AL – Arctic Lubricant (low temperature service -70°F) SG – (Sour Gas) meets the requirements of NACE MR0175/ISO
BC – Accessory bracket for mounting conduit with AGCO Mount 15156-3 Corrigendum 2 (for Chloride conditions ≤ 50 mg/l [ppm])
and NACE MR0103-2005 (SS valves only)
BL – Bonnet Lock Device (block valves) (page 154)
SG3 – (Sour Gas) meets the requirements of NACE MR0175/ISO
FB1 – MP2 with 1 each MNPT and FNPT connectors
15156-3 Corrigendum 2 (for Chloride conditions > 50 mg/l [ppm])
SB – Steam Block

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

14
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – PTM and PT7

2-Valve Manifolds

PT7

PTM

Product Overview Features and Benefits

The PT Two-Valve Calibration Manifolds are • Cost savings when manifolding the
used on static pressure transmitters, instruments. This eliminates several
switches or gauges. The shutoff valve, tee, parts used in conventional methods of
calibration valve, and all immediate ‘piping up’ resulting in cost reduction of
tubing/fittings are available in one simple 20-30 percent.
manifold. The PT manifolds are available
with either metal seats or replaceable soft • Compact design requires minimum
seat inserts. space for operation and installation.

The PTM manifold features a unique valve • Rolled threads, stem and bonnet
seat that can be converted from soft to threads are rolled for increased strength.
hard by simply removing two insert This prevents galling and adds years to
washers. No other parts are required. the useful life of the valve.

The PT7 manifold is available for elevated • Fewer leak points reduce leakage by
temperatures and features an integral metal having fewer parts to assemble.
seat.
• Teflon® and GRAFOIL® adjustable
packing is easily adjusted for leak-proof
and long service life.

• Stem threads are isolated from

process fluid (O-ring stem seal). This
prevents galling and corrosion of the
stem threads. The O-ring isolates the
stem threads from the process.

• Back seat stem prevents stem

blowout.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

15
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – PTM Specifications

Dimensions, inches [mm]

Instrument Instrument
B Max. Open

1.25 Vent/Test Vent/Test

[31.8]

Block/Isolate Block/Isolate

1/2- 14 NPT
3 Places
A Max. Process Process
Open

Vent/Test Valve

2.50 [63.5]
1/2- 14 NPT 1/2- 14 NPT
Vent/Test Port 0.63 [16.0] Instrument Port

0.68 [17.3]
Flow Washer

Optional Soft Seat

2.38
[60.5]

1.00 [25.4]

Block/Isolate
Valve
1/2- 14 NPT
0.25 [6.4] 1.00
[25.4] Process Port
ø 0.28 [7.1] Mounting Holes, 2 Places

Dimensions, inches [mm] Note

Packing A B 1. Approximate valve weight: 2.0 lb [0.9 kg].
0.136-inch [3.5 mm] diameter orifice.
2.50 3.75 Valve CV Hard Seat 0.25 maximum.
O-ring
[63.5] [95.3] Valve CV Soft Seat 0.24 maximum.
3.10 4.35
Teflon®
[78.7] [110.5]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

16
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – PTMV ( ) – ( ) – PM

(Panel Mount) Specifications
Dimensions, inches [mm]

Instrument
PTMV( )-4-PM 1/2 - 14
Panel Hole 1/2- 14 NPT
ø 0.469 [11.9] Instrument Port
0.188 [4.76] Max. 0.68 [17.3]
Thick Panel 0.63
Vent/Test Vent/Test Valve Vent/Test Port 1.25 [16.0]
[31.8]

Block/Isolate 1.38
[35.1]
3.25
[82.6]

Process

0.75 1.25
[19.1] [31.8]
Block/Isolate
Valve
1.00
Panel Nut [25.4]
1.25 0.63 [16.0] 2.50 [63.5]
[31.8]
ø 0.28 [7.1] Thru 1/2- 14 NPT
3.10 [78.7] Max. Open Mounting Holes Process Port
2 Places

Standard Materials
Valve Body Bonnet Stem Flow Washer4
CS2 A108 A108 A581-303 316
SS A479-316 A479-316 A276-316 316
SG3 A476-316 A479-316 Monel® R405 316
Monel® Monel® 400 Monel® R405 Monel® R405 Monel® 400
SG35 Hastelloy® C276 Hastelloy® C276 Hastelloy® C276 Hastelloy® C276

Notes
1. Approximate valve weight: 2.7 lb [1.2 kg].
0.136-inch [3.5 mm] diameter orifice.
Valve CV Hard Seat 0.25 maximum.
Valve CV Soft Seat 0.24 maximum.
2. CS is zinc cobalt plated to prevent corrosion.
3. SG (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and
NACE MR0103-2005.
4. Soft seated valves only.
5. SG3 (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum
2 (for Chloride conditions > 50 mg/l [ppm]).

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

17
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – PT7 Specifications

Dimensions, inches [mm]

B Max. Open Instrument

2.73
0.63 [16.0] [69.3]

Vent/Test
1.25 [31.8]

Vent/Test Port Block/Isolate

Block/Isolate
A Valve
Max.
Open
Process

Vent/Test Valve

Instrument Port 1/2 - 14 NPT TYP. 3 Places

Dimensions, inches [mm]

1.25 [31.8]
Packing A B
1.88
[47.8] 3.85 5.33
Teflon®
2.88 [97.8] [135.4]
[73.2]
4.50 5.98
GRAFOIL®
0.75 [19.1] [114.3] [151.9]
ø 0.28 [7.1]
Mounting Holes
1.00 [25.4] 2 Places

1.90 [48.3] Process Port

Standard Materials Notes

Valve1 Body Bonnet Stem Ball Packing 1. Approximate valve weight: 3.0 lb [1.4 kg].
0.187-inch [4.8 mm] diameter orifice.
CS2 A105 A108 A581-303 17-4 PH Teflon® Valve Cv 0.52 maximum.

GRAFOIL®/ 2. CS is zinc cobalt plated to prevent corrosion.

CS2 A105 A105 A581-303 17-4 PH
Low Emissions 3. SG (Sour Gas) meets the requirements of
Graphite NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm])
SS SS, A479-316 SS, A479-316 A276-316 316 Teflon® and NACE MR0103-2005.
GRAFOIL®/ 4. SG3 (Sour Gas) meets the requirements of
SS SS, A479-316 SS, A479-316 A276-316 316
Low Emissions NACE MR0175/ISO 15156-3 Corrigendum 2
Graphite (for Chloride conditions > 50 mg/l [ppm]).

SG3 SS, A479-316 SS, A479-316 Monel® 400 Monel® K500 Teflon®
GRAFOIL®/
SG3 SS, A479-316 SS, A479-316 Monel® 400 Monel® K500
Low Emissions
Graphite
Hastelloy® Hastelloy® Hastelloy®
SG34 Elgiloy® Teflon®

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

18
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – PTM and PT7

Specifications
Notes Pressure and Temperature Ratings - PTM
1. Approximate valve weight: 3.0 lb [1.4 kg]. Packing PCTFE/Delrin® Seat PEEK Seat Metal Seat
0.187-inch [4.8 mm] diameter orifice.
Valve Cv 0.52 maximum. 6000 psig@ 200°F 6000 psig@ 200°F
2. CS is zinc cobalt plated to prevent corrosion. 3000 psig @ 200°F 3000 psig@ 300°F 4000 psig@ 500°F
Teflon®
3. SG (Sour Gas) meets the requirements of
[207 barg @ 93°C] [414 barg @ 93°C] [414 barg @ 93°C]
NACE MR0175/ISO 15156-3 Corrigendum 2 [207 barg @ 149°C] [276 barg @ 260°C]
(for Chloride conditions ≤ 50 mg/l [ppm]) 3000 psig @ 200°F 6000 psig@ 200°F 6000 psig@ 200°F
and NACE MR0103-2005. O-ring
[207 barg @ 93°C] [414 barg @ 93°C] [414 barg @ 93°C]
4. SG3 (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm]).

Pressure and Temperature Ratings - PT7

Valve1 Packing Ratings

6000 psig @ 200°F 4000 psig @ 500°F

CS2 Teflon®
[414 barg @ 93°C] [276 barg @ 260°C]
GRAFOIL®/Low 6000 psig @ 200°F 1500 psig @ 850°F
CS2
Emissions Graphite [414 barg @ 93°C] [103 barg @ 454°C]

6000 psig @ 200°F 4000 psig @ 500°F

SS Teflon®
[414 barg @ 93°C] [276 barg @ 260°C]
GRAFOIL®/Low 6000 psig @ 200°F 1500 psig @ 1000°F
SS
Emissions Graphite [414 barg @ 93°C] [103 barg @ 538°C]

SG3 6000 psig @ 200°F 4000 psig @ 500°F

Teflon®
SG34 [414 barg @ 93°C] [276 barg @ 260°C]
SG3 GRAFOIL®/Low 6000 psig @ 200°F 1500 psig @ 1000°F
SG34 Emissions Graphite [414 barg @ 93°C] [103 barg @ 538°C]

PTM Pressure vs. Temperature

Delrin®/PCTFE
PEEK (O-ring Packed)
Metal Seat (O-ring Packed)
6000 PEEK (Teflon® Packed)
[414] Metal Seat (Teflon® Packed)
Denotes intersecting data
5000
[345]
Pressure psig [barg]

4000
[276]

3000
[207]

2000
[138]

1000
[69]

0 100 200 300 400 500

[-18] [38] [93] [149] [204] [260]

Temperature °F [°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

19
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – PTM and PT7

Specifications
PT7 Pressure vs. Temperature

PT7VIC/PT7VIS
6000 PT7HIC/PT7EIC
[414] PT7HIS/PT7EIS
Denotes
5000
intersecting data
Pressure psig [barg]

[345]

4000
[276]

3000
[207]

2000
[138]
1500
[103]
1000
[69]

0
0 100 200 300 400 500 600 700 800 900 1000
[-18] [38] [93] [149] [204] [260] [316] [371] [427] [482] [538]
850
Temperature °F [°C] [454]

PTM – Ordering Information

PTM V D S –4 – SG

Bonnet Packing
V – Teflon®
R – O-ring (SS - Viton®, CS - BUNA-N) (Soft Seat Only)

Seat Material
D – Delrin® (standard)
K – PCTFE
E – PEEK
I – Integral (body material)

Body Material
C – A108 W – 316L SS
S – A479-316 SS J – Hastelloy®
M – Monel® 400

Connections
4 – 1/2-inch FNPT

Options
AL – Arctic Lubricant (low temperature MS – Monel® Stem Corrigendum 2 (for Chloride
service -70°F) - not available for PHB – Phenolic Black Handle conditions ≤ 50 mg/l [ppm]) and
CS valves NACE MR0103-2005
PHG – Phenolic Green Handle
AM – AGCO Mount Kit for 2-inch pipe SG3 – (Sour Gas) meets the requirements
stand mounting of manifold (pg 38) PHR – Phenolic Red Handle of NACE MR0175/ISO 15156-3
CL – Cleaned for Chlorine Service. PM – Panel Mount (page 17) Corrigendum 2 (for Chloride
PV – Plug Vent conditions > 50 mg/l [ppm])
OC – Cleaned for Oxygen Service.
SG – (Sour Gas) meets the requirements SP – Special Requirements - please
HD – Hydrostatic Testing (100 percent) specify
(MSS SP-61) of NACE MR0175/ISO 15156-3

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

20
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – PTM and PT7

Specifications
PT7 – Ordering Information

PT7 V I S –4 – SG

Bonnet Packing
V – Teflon®
H – GRAFOIL®
E – Low Emissions Graphite

Seat Material
I – Integral (body material)

Body Material
C – A105
S – A479-316 SS
W – 316L SS
J – Hastelloy®

Connections
4 – 1/2-inch FNPT

Options
AL – Arctic Lubricant (low temperature service -70°F) - not available for CS valves
AM – AGCO Mount Kit for 2-inch pipe stand mounting of manifold (page 38)
CL – Cleaned for chlorine service
HD – Hydrostatic testing (100 percent)
MS – Monel® Stem
OC – Cleaned for oxygen service
PO – Plug Outlet
SG – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and NACE MR0103-2005 (SS valves only)
(not available for O-ring packed valves)
SG3 – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm])
SP – Special Requirements - please specify

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

21
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – PT7M ASME B31.1 or

B31.3 Specifications Meets MSS SP-1053
PT7MHP – Ordering Information Power Industry Applications1
PT7MHP S –4 – XP – AM

Body Material
C – A105
S – A479-316 SS
J – Hastelloy®
M – Monel®

Connections (Process x Instrument x Vent)

3 – 3/8-inch FNPT x 3/8-inch FNPT x 3/8-inch FNPT
3TC – 3/8-inch Tube Stub (6" x 0.065") - All Connections
3TC4 – 3/8-inch Tube Stub (6" x 0.065") x 3/8-inch Tube Stub x 1/2-inch FNPT
3TC44 – 3/8-inch Tube Stub (6" x 0.065") x 1/2-inch FNPT x 1/2-inch FNPT
4 – 1/2-inch FNPT x 1/2-inch FNPT x 1/2-inch FNPT
422 – 1/2-inch FNPT x 1/4-inch FNPT x 1/4-inch FNPT
442 – 1/2-inch FNPT x 1/2-inch FNPT x 1/4-inch FNPT
4B2 – 1/2-inch PSW x 1/4-inch FNPT x 1/4-inch FNPT
4TC4 – 1/2-inch Tube Stub (6" x 0.095") x 1/2-inch Tube Stub x 1/2-inch FNPT
4TC44 – 1/2-inch Tube Stub (6" x 0.095") x 1/2-inch FNPT x 1/2-inch FNPT

Options
AM – AGCO Mount Kit for 2-inch pipe stand mounting of manifold (page 38)
PO – Plug Outlet
SP – Special Requirements - please specify

Notes
1. All Manifolds come standard with GRAFOIL®
packing, integral seats, bonnet locks, and
are subjected to hydrostatic testing.
2. Manifold ratings:
SST
6000 psig @ 100°F [414 barg @ 38°C]
3030 psig @ 1000°F [209 barg @ 538°C]
STL
6170 psig @ 100°F [425 barg @ 38°C]
3430 psig @ 800°F [236 barg @ 427°C]
Monel®
5000 psig @ 100°F [345 barg @ 38°C]
2911 psig @ 900°F [201 barg @ 482°C]
3. See page 156 for Code Requirements.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

22
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – A30 2-Valve Manifold

Product Overview Features and Benefits

The A30 is a direct mounting two-valve • Direct mounting compact design
manifold which combines an isolation valve requires a minimum of space for
and a vent/calibrate valve in a single unit. operation and installation with fewer
Standard process connections are 1/2-inch potential leak points.
NPT threaded. The vent/calibrate port is
• Installation costs reduced by
threaded 1/4-inch NPT and provided with
manifolding the valves, thereby
vent plug as standard. Suitable for
eliminating several components
pressures to 6000 psig [414 barg] and
essential for ‘piping-up.’
temperatures of up to 1000°F [538°C].
A30 has metal seated valves and is • Ball end stem is free-swiveling which
available with standard valve bonnets with ensures perfect alignment, providing
Teflon® stem packing, or high temperature repetitive bubble-tight shutoff and
bonnets which have Graphite packing. All long life.
manifolds are supplied with two 7/16-inch
UNF bolts and an instrument seal ring as • Teflon® or Graphite packing below
standard. stem threads prevents lubricant
washout and thread corrosion.

• Back seat stem prevents stem blowout

or accidental removal while in operation.

• Threaded vent ports allows vent to be

safely piped away, supplied plugged as
standard.

• Manifold mounting, standard pipe

bracket bolts directly to the manifold
providing a rigid support for the
transmitter. Instrument can be easily
removed for service or repair.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

23
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – A30 Specifications

Dimensions, inches [mm] Threaded x Flanged

Instrument
Instrument Port
Direct Mounting

Vent/Test
1.25
[32]
Block/Isolate

0.375 [9.53]
0.750 [19.05] Process

1/2 1/4 - 18 NPT

- 14 NPT Process Port
Vent Port (plugged)

Block/
Isolate 1.62 [41]
Valve Vent
Valve
2.50
[64]

M6 x 1.0 x .32 [8] deep 3.00 [76]

Mounting Holes
2 Places 3.40 [86]
8.62 [219] Max. Open

AGCO Mount MB7

A30 is available with a mounting bracket
suitable for 2-inch [50 mm] pipe stand.
Supplied in zinc plated CS is standard. See
1.25 [32] options for AM Kit, page 38.

4.9
[125]

2.4
[60]

1.8
[45]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

24
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – A30 Specifications

Valve Bonnet Identification Connections Notes

Dust Cap Coding: The valve bonnet dust Standard Connections 1. Threaded connection: vent supplied with
caps are color coded to identify the gland Process Threaded 1/2-inch NPT to blanking plug as standard.
packing/stem. ANSI/ASME B1.20.1.
2. All manifolds are supplied with a seal ring and
Vent Threaded 1/4-inch NPT to two 7/16-inch UNF HT steel mounting bolts. A
White: Standard bonnet assembly
ANSI/ASME B1.20.1. Teflon® seal ring is supplied with the standard
Teflon® packing.
Instrument Flanged for direct mounting to bonnet; a Graphite seal ring is supplied with
Green: Sour Gas service Teflon®
transmitters. the high temperature bonnet.
packing.
Other Connections
Ring Labels: The valve bonnets have
Threaded BSP Tr to BS21
color coded ring labels for service
BSP F to BS2779
identification.
Please consult the factory for availability.
Red: Vent Valves
Blue: Isolate Valves

Special Severe Service Materials Standard Materials

Duplex UNS S31803 Valve1 Body Bonnet Stem Ball Seat2
6MO UNS S31254
CS A108 A108 303 SS 17-4PH
Hastelloy® C276
SS SS, A479 316 316 SS 316 SS 316 SS
Incoloy® 825
Monel® Monel® 400 Monel® 400 Monel® 400 Monel® K500
SG3 SS, A479 316 316 SS Monel® 400 Monel® K500
CS, SS and Monel® valves are suitable for most
process applications, however for severe SG34 Hastelloy® C276 Hastelloy® C276 Hastelloy® C276 Elgiloy®
service, A30 valves are also available in the
above exotic materials. For any other material Notes
requirements, please consult the factory.
1. Approximate valve weight: 3.5 lb [1.6 kg]. 3. SG (Sour Gas) meets the requirements of
0.136-inches [3.5 mm] diameter orifice. NACE MR0175/ISO 15156-3 Corrigendum 2
Valve Cv 0.25 maximum. (for Chloride conditions ≤ 50 mg/l [ppm]) and
2. Metal seats are integral with the body. NACE MR0103-2005.
4. SG3 (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm]).

Pressure and Temperature Ratings Pressure vs. Temperature

Valve Teflon® Bonnet (standard)
A30HIS/A30EIS
CS, SS, 6000 psig @ 200°F [414 barg @ 93°C] 6000 A30HIC/A30EIC
Monel® 4000 psig @ 500°F [276 barg @ 260°C] [414]
A30VIC
A30VIS
5000
A30VIM
[345]
Pressure psig [barg]

Valve High Temperature Denotes

4000 intersecting
6000 psig @ 200°F [414 barg @ 93°C] [276] data
CS
1500 psig @ 850°F [103 barg @ 454°C]
3000
6000 psig @ 200°F [414 barg @ 93°C]
SS [207]
1500 psig @1000°F [103 barg @ 538°C]
2000
[138]
1500
[103]
1000
[69]

0 100 200 300 400 500 600 700 800 900 1000
[-18] [38] [93] [149] [204] [260] [316] [371] [427] [482] [538]
850
Temperature °F [°C] [454]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

25
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – A30 Specifications

Ordering Information

A30T V I S –4 – SG

Bonnet Packing
V – Teflon®
H – Graphite

Seat
I – Integral

Body Material
C – CS
S – SS
M – Monel®
J – Hastelloy®

Process Connections
2 – 1/4-inch FNPT
4 – 1/2-inch FNPT

Options
AL – Arctic Lubricant (low temperature service -70°F) - not available for CS valves
AT – Tamper-proof Bonnet
BL – Bonnet Lock Device (Accessories, page 154)
K – Key for -AT
LAT – Lockable Tamper-proof Bonnet
MB7 – AGCO Mount Kit for 2-inch pipe stand mounting
OC – Cleaned for oxygen service
PD – Padlock for -LAT
R3V – Add for use with Rosemount® Model 3051C (SS 18-8 Bolts)
SSB – 316 SS Flange Bolt (B8M Class 2) - will provide full pressure rating
SSC1 – 316 Flange Bolt (B8M) - maximum pressure rating 4500 psi [310 barg]
SG – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and NACE MR0103-2005 (SS valves only)
SG3 – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm])
ST – Stellite Ball Ended Stem
SP – Special Requirements - please specify

Note
1. If SSC flange bolts are specified, manifold
ratings are:
4500 psig @ 100°F [310 barg @ 38°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

26
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – M25, M25A, M25B, M251

and M251B
Product Overview
The M25, M25A, M25B, M251 and M251B
are versatile two-valve manifolds with a
variety of inlet and outlet connections. M25A
Lightweight and with compact dimensions,
M25/M251 manifolds enable isolation,
calibration and venting in single unit.

Especially designed for use with pressure

transmitter, gauges and switches, the M25
versatile M25 two-valve manifold combines
an isolation valve and vent/calibrate valve
in a single unit. Process connections are
either threaded or flanged. Instrument
connections are available threaded with
either NPT, BSP Tr or BSF threads. M25
M25B
has a threaded 1/4-inch vent/calibrate port,
fitted with a plug as standard. Suitable for
pressures up to 10,000 psig [689 barg]
(for M251) and temperatures of up to
1000°F [538°C]. The M25/M251s are
available with standard, high pressure or
high temperature valve bonnets.
Applications • Teflon® or GRAFOIL® packing below
• Static pressure instrument mounting to stem threads prevents lubricant
threaded connection. (M25, M251 washout and thread corrosion.
M25B and M251B) • Back seat stem prevents stem blowout
• Gauge/instrument isolation. or accidental removal while in operation.

• Vent or calibrate to separate threaded • Threaded vent ports allows vent to be

port. safely piped away, supplied plugged as
standard.
• Liquid and vapor service.
• Manifold mounting, all manifolds are
• Static pressure instrument mounted to supplied with mounting holes as
flanged/futbol process connection. standard to enable pipe bracket
(M25A) mounting.

Features and Benefits

• Remote mounting compact design
requires a minimum of space for
operation and installation with fewer
potential leak points.

• Installation costs reduced by

manifolding the valves, thereby
eliminating several components
essential for ‘piping-up.’

• Ball end stem is free-swiveling which

ensures perfect alignment, providing
repetitive bubble-tight shutoff and
long life.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

27
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – M25 and M251

Specifications
M25 and M251 Dimensions, inches [mm] Female x Flange – Front Vent

A Max. Open Instrument

Vent/Test

Block/Isolate
1/ 2
- 14 NPT Instrument
Connection
Instrument Side
0.53 [14] 2.5 [63.50] Process
0.53 [14]

Dimensions, inches [mm]

0.28 [7]
Block/Isolate Packing A
Valve
Teflon® 7.87 [200]
GRAFOIL® 8.98 [228]

Vent/Test
Valve
Notes
1/4 - 18 NPT Vent Port
(supplied plugged) ø 0.25 [6.75] 1. Approximate valve weight: 2.2 lb [1.0 kg].
Mounting Holes 0.187-inch [4.8 mm] diameter orifice.
0.71 [18] Process Side 2 Places Valve Cv 0.52 maximum.
1/2 - 14 NPT Process Connection
2. The M25 and M251 are supplied as standard
with two 0.26-inch [6.7 mm] diameter
mounting holes.

AGCO Mount MB51 Wall Mounting Bracket BM3

The AGCO Mount principle is to mount the A wall mounting bracket is available suitable
manifold not the instrument enabling easier for M25A, M25B, M251B.
loop installation and lower on-going
maintenance costs. M25A, M25B and
M251B are available with an MB51 AGCO 2.84 [72]
Mount suitable for 2-inch NB pipe stand. 0.83 [21]
Supplied in zinc plated CS as standard.

7.28 [185]
1.69 2.50
3.35 [43] [63]
[85]

1.00 [25]
7.50 [190]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

28
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – M25A Specifications

M25A Dimensions, inches [mm] Flanged x Threaded (Bottom Vent)

Instrument Vent/Test Valve

Vent/Test
B
Max.
Block/Isolate Open Block/Isolate
Valve

Process

Dimensions, inches [mm] A Max. Open

Packing A B 1.00 [25.4]

1/2 - 14 NPT Instrument Instrument Side
0.87 [22.0]
Connection
6.26 3.95
Teflon®
[159] [100] ø 0.26 [6.70]
Mounting Holes
6.70 4.57 2.50 2 Places
GRAFOIL® [63.5]
[170] [116]

1/4- 18 NPT Vent Port

Notes
(supplied plugged)
1. Approximate valve weight: 3.3 lb [1.5 kg].
0.187-inch [4.8 mm] diameter orifice. 0.438 UNF
Process Side 0.40 [10.0]
Valve Cv 0.52 maximum. Mounting Holes
2 Places
2. The M25A is supplied as standard with two
0.26-inch [6.7 mm] diameter mounting holes.
AGCO Mount MB51 Wall Mounting Bracket BM3
The AGCO Mount principle is to mount the A wall mounting bracket is available suitable
manifold not the instrument enabling easier for M25A, M25B, M251B.
loop installation and lower on-going
maintenance costs. M25A, M25B and
M251B are available with an MB51 AGCO 2.84 [72]
Mount suitable for 2-inch NB pipe stand.
0.83 [21]
Supplied in zinc plated CS as standard.

7.28 [185]
1.69 2.50
3.35 [43] [63]
[85]

1.00 [25]
7.50 [190]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

29
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – M25B and M251B

Specifications
M25B and M251B Dimensions, inches [mm] Threaded x Threaded AGCO Mount MB51
(Bottom Vent) The AGCO Mount principle is to mount the
manifold not the instrument enabling easier
loop installation and lower on-going
Vent/Test Valve maintenance costs. M25A, M25B and
M251B are available with an MB51 AGCO
Mount suitable for 2-inch NB pipe stand.
Supplied in zinc plated CS as standard.
B
Max. 7.28 [185]
Open Block/Isolate Valve
3.35
[85]

7.50 [190]
A Max. Open
1/2 - 14 NPT
Instrument Side
Instrument Connection
1.13 [28.6]
0.63 [15.9]
ø 0.26 [6.70]
Mounting Holes
2 Places
2.50
[63.5]

Wall Mounting Bracket BM3

1/4- 18 NPT Vent Connection A wall mounting bracket is available
(supplied plugged)
suitable for M25A, M25B, M251B.
1/2- 14 NPT 0.75 [19.0]
Process Connection
1.25 [32.0]
Process Side 2.84 [72]
0.83 [21]

Dimensions, inches [mm] Instrument

Packing A B 1.69 2.50

[43] [63]
5.38 3.95 Vent/Test
Teflon®
[134] [100]
5.71 4.57
GRAFOIL® 1.00 [25]
[145] [116] Block/Isolate

Notes Process

1. Approximate valve weight: 2.2 lb [1.0 kg].

0.187-inch [4.8 mm] diameter orifice.
Valve Cv 0.52 maximum.
2. The M25B and M251B are supplied as
standard with two 0.26-inch [6.7 mm]
diameter mounting holes.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

30
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – M25, M25A, M25B, M251

and M251B Specifications
Notes Valve Bonnet Identification Special Severe Service Materials
1. Threaded connection: vent supplied with Dust Cap Coding: The valve bonnet dust Duplex UNS S31803
blanking plug as standard. caps are color coded to identify the gland
6MO UNS S31254
packing/stem.
2. Approximate valve weight: 3.3 lb [1.5 kg]. Hastelloy® C276
0.187-inch [4.8 mm] diameter orifice. White: Standard bonnet assembly
Valve Cv 0.52 maximum. Incoloy® 825
Teflon® packing.
3. For CS valves with GRAFOIL® packing body Blue: High pressure bonnet
and bonnet material is A105. For CS valves assembly Teflon® packing. CS, SS and Monel® valves are suitable for most
non-wetted parts are all CS. Green: Sour Gas service Teflon® process applications, however for severe service,
4. SG (Sour Gas) meets the requirements of packing. M25/M251 valves are also available in the above
NACE MR0175/ISO 15156-3 Corrigendum 2 exotic materials. For any other material
(for Chloride conditions ≤ 50 mg/l [ppm]) and requirements, please consult the factory.
NACE MR0103-2005. Connections1
5. SG3 (Sour Gas) meets the requirements of Standard Connections
NACE MR0175/ISO 15156-3 Corrigendum 2
Process and instrument M25, M251 M25B
(for Chloride conditions > 50 mg/l [ppm]).
and M251B:

Threaded 1/2-inch
NPT to ANSI/ASME
B1.20.1.

M25A has a flanged inlet connection.

Vent Threaded 1/4-inch NPT to

ANSI/ASME B1.20.1.

Other Connections
Threaded BSP Tr to BS21
BSP F to BS2779

Please consult the factory for availability.

Standard Materials
Valve2 Body Bonnet Stem Ball Seat
CS3 A108 A108 303 SS 17-4PH
SS 316 SS 316 SS 316 SS 316 SS
Monel® Monel® 400 Monel® 400 Monel® 400 Monel® K500
SG4 316 SS 316 SS Monel® 400 Monel® K500
SG35 Hastelloy® C276 Hastelloy® C276 Hastelloy® C276 Elgiloy®

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

31
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – M25, M25A, M25B, M251

and M251B Specifications
Pressure vs. Temperature - M25, M25A and M25B Pressure and Temperature Ratings
– M25, M25A and M25B
M25__VIC Valve Teflon® Bonnet (standard)
M25__VIS
6000 CS, SS
[414]
M25__VIM 6000 psig @ 200°F [414 barg @ 93°C]
M25__HIC and
4000 psig @ 500°F [276 barg @ 260°C]
5000 M25__EIC Monel ®

[345] M25__HIS
Pressure psig [barg]

M25__EIS
4000 Denotes
[276] intersecting
data Valve High Temperature
3000
[207] 6000 psig @ 200°F [414 barg @ 93°C]
CS
1500 psig @ 850°F [103 barg @ 454°C]
2000
[138] 6000 psig @ 200°F [414 barg @ 93°C]
1500 SS
[103] 1500 psig @ 1000°F [103 barg @ 538°C]
1000
[69]

0
0 100 200 300 400 500 600 700 800 900 1000
[-18] [38] [93] [149] [204] [260] [316] [371] [427] [482] [538]
850
[454]
Temperature °F [°C]

Pressure vs. Temperature - M251 and M251B Pressure and Temperature Ratings
– M251 and M251B
Valve High Temperature
10,000 psig @ 200°F [689 barg @ 93°C]
SS
10,000 4000 psig @ 500°F [276 barg @ 260°C]
[689]
Pressure psig [barg]

8000
[552]

6000
[414]

4000
[276]

2000
[138]

0 100 200 300 400 500

[-18] [38] [93] [149] [204] [260]

Temperature °F [°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

32
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – M25, M25A and M25B

Specifications
Ordering Information

M25A V I S –4 – SG

Valve Type
M25 – Threaded x Threaded
(front vent)
M25A – Flanged x Threaded
(bottom vent)
M25B – Threaded x Threaded
(bottom vent)

Packing
V – Teflon® (patented protected)
H – GRAFOIL®
E – Low Emissions Graphite

Seat
I – Integral

Body Material
C – CS
S – SS
M – Monel®
J – Hastelloy®

Process Connections
M25A – Inlet x Outlet M25/M25B – Inlet x Outlet
4 – Flanged x 1/2-inch FNPT 2 – 1/4-inch FNPT x 1/4-inch FNPT
4 – 1/2-inch FNPT x 1/2-inch FNPT

Options
AL – Arctic Lubricant (low temperature service -70°F) - not available for CS valves
AT – Tamper-proof Bonnet
BL – Bonnet Lock Device (Accessories, page 154)
BM3 – Wall Mounting Bracket (M25A, M25B and M251B only)
K – Key for -AT
LAT – Lockable Tamper-proof Bonnet
MB51– AGCO Mount Kit for 2-inch pipe stand mounting (page 38)
OC – Cleaned for oxygen service
PD – Padlock for -LAT
SG – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and NACE MR0103-2005 (SS valves only)
SG3 – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm])
ST – Stellite Ball Ended Stem
SP – Special Requirements - please specify

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

33
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – M251 and M251B

Specifications
Ordering Information

M251 V I S –4 – SG

Valve Type
M251 – Threaded x Threaded
(front vent)
M251B – Threaded x Threaded
(bottom vent)

Packing
V – Teflon® (patented protected)

Seat
I – Integral

Body Material
C – CS
S – SS
M – Monel®
J – Hastelloy®

Process Connections (Inlet x Outlet)

2 – 1/4-inch FNPT x 1/4-inch FNPT
4 – 1/2-inch FNPT x 1/2-inch FNPT

Options
AL – Arctic Lubricant (low temperature service -70°F) - not available for CS valves
AT – Tamper-proof Bonnet
BL – Bonnet Lock Device (Accessories, page 154)
BM3 – Wall Mounting Bracket (M251B only)
K – Key for -AT
LAT – Lockable Tamper-proof Bonnet
MB51– AGCO Mount Kit for 2-inch pipe stand mounting (page 38)
OC – Cleaned for oxygen service
PD – Padlock for -LAT
SG – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and NACE MR0103-2005 (SS valves only)
SG3 – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm])
ST – Stellite Ball Ended Stem
SP – Special Requirements - please specify

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

34
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – MM2 Specifications

Product Overview Features and Benefits

Designed for remote mounting an • Remote mounting compact design
instrument via 1/4-inch threaded process requires minimum space for operation
and instrument connections, the MM2 uses and installation.
H5 miniature bonnets in a block and bleed
• Installation costs reduced by
configuration. Available in SS only and with
manifolding the valves. This eliminates
metal or soft seats, this versatile design can
several parts used in conventional
be converted from a metal to a soft seated
methods of ‘piping up.’
version simply by fitting a soft seat and flow
washer. MM2 is suitable for pressures of up • Metal or field replaceable soft seats.
to 6000 psig [414 barg] and temperatures This unique seat can be converted from
of up to 500°F [260°C]. The bonnet is metal to soft simply by fitting a soft seat
supplied with Teflon® stem packing, and and flow washer. Soft seats are field
options include Delrin®, PCTFE or PEEK replaceable for easy maintenance,
soft seats. extending the useful life of the valve.

Applications • Extended valve life, stem threads are

• Compact instrument control loops. rolled rather than cut for increased
strength and smooth valve operation.
• Static pressure/gauge instruments.
• Back seat design prevents stem
• Control panels. blowout while under pressure, or
during operation.
• Gas sampling equipment.
• Threaded vent ports allow the vent
to be safely piped away; supplied
plugged as standard.

• Manifold mounting, manifolds are

supplied with mounting holes as
standard to enable surface or cabinet
mounting.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

35
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – MM2 Specifications

Dimensions, inches [mm] Threaded x Threaded

3.75 [95] ø 0.38 [9.5]

Mounting Holes
Instrument
1/4
- 18 NPT 2 Places
Vent/Test

Vent/Test
1.0
[25] 0.28 [7]
Block/Isolate
1.5
[38]

Process
1/4- 18 NPT
1/4
- 18 NPT
Instrument Process
2.25 [57] Connection
Connection

4.50 [114]

Vent/Test Valve

Block/Isolate Valve
2.85 [72]
Max. Open

1.0
[25]

Connections4 Standard Materials

Standard Connections Valve1 Body Bonnet Stem Soft Flow Packing
Threaded 1/4-inch NPT to ANSI/ASME
Seat2 Washer
B1.20.1.
SS SS, 316 316 SS 316 SS PCTFE 316 SS Teflon®
Other Connections
Threaded 1/4-inch BSP Tr to BS21 SG3 SS, 316 316 SS Monel® 400 PCTFE 316 SS Teflon®
SG35 Hastelloy® Hastelloy® Hastelloy® PCTM Hastelloy® Teflon®
Please consult the factory for availability.

Bonnet Assembly Soft Seat Notes

The H5 bonnet assembly has a compact All miniature manifolds and valves feature a 1. Approximate valve weight: 2.0 lb [.90 kg].
design with a one-piece rotating stem unique valve seat which may be converted 0.136-inch [3.5 mm] diameter orifice.
which is ‘V’ tipped for ‘better’ flow control. from metal to soft simply by fitting a soft Valve Cv Hard seat 0.25 maximum.
The stem threads are rolled and lubricated seat and flow washer. SS valves use Valve Cv Soft seat 0.24 maximum.
to prevent galling and reduce operating PCTFE2 soft seat as standard. Delrin® and 2. PCTFE (Polychlorotrifluoroethylene) is exact
torque. PEEK seats are also available. equivalent of Kel-F®.

The SS bonnet is fitted with an adjustable 3. SG (Sour Gas) meets the requirements of
Teflon® stem packing. NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm])
The H5 bonnets are assembled with a and NACE MR0103-2005.
bonnet locking pin to prevent accidental 4. Threaded connection: vent supplied with
removal in service. blanking plug as standard.
5. SG3 (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm]).

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

36
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds – MM2 Specifications

Pressure and Temperature Ratings Pressure vs. Temperature

Valve Teflon® Packed
PEEK Seat
6000 psig @ 200°F Delrin®
[414 barg @ 93°C] 6000 PCTFE
Metal [414] Hard Seat
4000 psig @ 500°F
Denotes
[276 barg @ 260°C] 5000 intersecting data
[345]
3000 psig @ 200°F
Delrin®/PCTFE

Pressure psig [barg]

[207 barg @ 93°C] 4000
[276]
6000 psig @ 200°F
[414 barg @ 93°C]
PEEK 3000
3000 psig @ 300°F [207]
[207 barg @ 149°C]
2000
[138]

1000
[69]

0 100 200 300 400 500

[-18] [38] [93] [149] [204] [260]

Temperature °F [°C]

Ordering Information

MM2 V D S –2 – SG

Bonnet Packing
V – Teflon®

Seat
I – Integral (body material)
D – Delrin®
K – PCTFE (Polychlorotrifluoroethylene is the exact
equivalent of Kel-F®)
E – PEEK

Body Material
S – SS, 316
J – Hastelloy®

Connection
2 – 1/4-inch FNPT

Options
BSP Tr – BSP Taper Thread
OC – Cleaned for oxygen service
SG – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and NACE MR0103-2005
SG3 – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm])
SP – Special Requirements - please specify

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

37
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Static Pressure Manifolds - AGCO Mount Kits

AGCO Mount Kits for Static Pressure Manifolds

Manifold Kit Material Description
Style Part Number
02.1639.501–AM Standard Kit
M4TP 02.1639.508–AM CS1 For bottom purge
02.1639.500–AM With steam block

02.1639.505–AMS Standard Kit

M4TP 02.1639.509–AMS SS For bottom purge
02.1639.871–AMS With steam block

MP1 — — Bracket included

MP2 — — Bracket included

02.1639.673–AM CS1 Standard Kit
PTM
02.1639.675–AMS SS Standard Kit

02.1639.673–AM CS1 Standard Kit

PT7M
02.1639.675–AMS SS Standard Kit
A30T MB7–AM CS2 Standard Kit

A30T MB7S–AMS SS Standard Kit

MM2 — — Surface mounted
M25A MB51 CS2 Standard Kit

M25A MB51S SS Standard Kit

M25B/M251B MB51–BM3 CS2 Standard Kit

M25B/M251B MB51S–BM3S SS Standard Kit

M25/M251 — — Surface mounted

Notes
1. Zinc cobalt plated.
2. Zinc plated.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

38
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Liquid Level Manifolds – M4TL 2-Valve Manifold

Product Overview • Less instrument damage occurs

The M4TL is a single-flanged, two-valve when the instrument is be safely
manifold consisting of two block valves with warehoused until final ‘loop’ checkout,
no equalizer passage. The manifold is reducing the chances of damage during
designed for use with ΔP – style pressure construction.
transmitters in liquid level service on
• Secure mounting is ensured by the
pressurized vessels.
AGCO Mount. Instrument piping
The two valves in the M4TL have free- stability is enhanced when directly
swiveling ball end stems to ensure bubble- supported by the pipe stand through
tight shutoff. The M4TL has 1/2-inch NPT the manifold.
process connections, and is designed to
• Easy instrument removal results from
mount directly to the differential pressure
direct bolting to the manifold. Signal
transmitter.
lines, purge lines, etc. left undisturbed.
Like all the M4 manifolds, the M4TL may be This facilitates repair, service, and
mounted using the AGCO Mount option for calibration.
easy assembly and maintenance.
• Free-swiveling ball end stem design
Features and Benefits assures bubble-tight closure without
seat galling.
• Cost savings when manifolding the
instruments. This eliminates several • Fewer leak points reduce leakage
parts used in conventional methods of by having fewer parts to assemble.
‘piping up’ resulting in cost reduction of
20-30 percent. • Valve packing is below stem threads
and seal is below body-to-bonnet
• Compact design requires minimum threads, keeping corrosion to a
space for installation and operation. minimum.

• Immediate installation is allowed with

the AGCO Mount. Steam block,
bracket, and all associated piping can
be installed without the instrument at
the time of plant construction.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

39
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Liquid Level Manifolds – M4TL Specifications

Metal Seat (Soft Seat available) Dimensions, inches [mm]

1.62
[41.1]
3.40 [86.4] 0.81 [20.6]
1.70
[43.2] Instrument Side

2.38 [60.5]
2.41
[61.2]
3.70
[94.0]

0.94 [23.9]

1/2 - 14 NPT 2.12 ø 0.38 [9.6]

Process Connections [53.8] Mounting Holes
2 Places 2 Places
A Max. Open

Instrument
Dimensions, inches [mm]
Packing A
8.60
Teflon®
[218.4]
Block/ Block/
9.90 Isolate
GRAFOIL® Isolate
[251.5]

Process

Standard Materials Notes

Valve1 Packing Body Bonnet Stem Ball Bolts5 1. Approximate valve weight: 5.0 lb [2.3 kg].
Metal seat:
CS2 Teflon® A576 10L18 A108 A581-303 17-4 PH A193-B7 0.156-inch [4.0 mm] diameter orifice.
GRAFOIL®/ Valve Cv 0.36 maximum.

CS2 Low Emissions A576 10L18 A105 A581-303 17-4 PH A193-B7 Soft seat:
0.187-inch [4.8 mm] diameter orifice.
Graphite
Valve Cv 0.83 maximum.
SS Teflon® A479-316 A479- 316 A276-316 316 A193-B7 2. CS is zinc cobalt plated to prevent corrosion.
GRAFOIL®/ 3. SG (Sour Gas) meets the requirements of
SS Low Emissions A479-316 A479- 316 A276-316 316 A193-B7 NACE MR0175/ISO 15156-3 Corrigendum 2
Graphite (for Chloride conditions ≤ 50 mg/l [ppm])
and NACE MR0103-2005.
SG3 Teflon® A479-316 A479- 316 Monel® 400 Monel® K500 A193-B7
4. SG3 (Sour Gas) meets the requirements of
GRAFOIL®/ NACE MR0175/ISO 15156-3 Corrigendum 2
SG3 Low Emissions A479-316 A479-316 Monel® 400 Monel® K500 A193-B7 (for Chloride conditions > 50 mg/l [ppm]).
Graphite 5. 316 SS bolts lower pressure ratings to a
maximum of 4500 psi [310 barg]. Consult
Hastelloy® Hastelloy® Hastelloy®
SG34 Teflon® Elgiloy® A193-B7 factory for full rating with 316 SS bolts.
C276 C276 C276

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

40
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Liquid Level Manifolds – M4TL Specifications

Notes Pressure and Temperature Ratings

1. CS is zinc cobalt plated to prevent corrosion. Valve Packing Ratings4
2. SG (Sour Gas) meets the requirements of
6000 psig @ 200°F [414 barg @ 93°C]
NACE MR0175/ISO 15156-3 Corrigendum 2 CS1 Teflon®
(for Chloride conditions ≤ 50 mg/l [ppm]) and 4000 psig @ 500°F [276 barg @ 260°C]
NACE MR0103-2005. GRAFOIL®/ 6000 psig @ 200°F [414 barg @ 93°C]
CS1
3. SG3 (Sour Gas) meets the requirements of Low Emissions Graphite 4000 psig @ 600°F [276 barg @ 316°C]
NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm]). 6000 psig @ 200°F [414 barg @ 93°C]
SS Teflon®
4000 psig @ 500°F [276 barg @ 260°C]
4. 316 SS bolts lower pressure ratings to a
maximum of 4500 psi [310 barg]. Consult GRAFOIL®/ 6000 psig @ 200°F [414 barg @ 93°C]
factory for full rating with 316 SS bolts.
SS
Low Emissions Graphite 1500 psig @ 1000°F [103 barg @ 538°C]
SG2 6000 psig @ 200°F [414 barg @ 93°C]
Teflon®
SG33 4000 psig @ 500°F [276 barg @ 260°C]
SG2 GRAFOIL®/ 6000 psig @ 200°F [414 barg @ 93°C]
SG33 Low Emissions Graphite 1500 psig @ 1000°F [103 barg @ 538°C]

Pressure vs. Temperature

M4TLHIS-4
6000 M4TLEIS-4
[414] M4TLHIC-4
M4TLEIC-4
5000 M4TLVIC-4
Pressure psig [barg]

[345] M4TLVIS-4
Denotes
4000
intersecting
[276]
data

3000
[207]

2000
[138]
1500
[103]
1000
[69]

0 100 200 300 400 500 600 700 800 900 1000
[-18] [38] [93] [149] [204] [260] [316] [371] [427] [482] [538]

Temperature °F [°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

41
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Liquid Level Manifolds – M4TL Specifications

Ordering Information

M4TL V I C –4 – AM

Packing
V – Teflon®
H – GRAFOIL®

Seat Material
I – Integral (body material)

Body Material
C – CS, A576-10L18
S – SS, A479-316
W – 316L SS
J – Hastelloy®

Process Connection
4 – 1/2-inch FNPT

Options
AL – Arctic Lubricant (low temperature service -70°F) - not available for CS valves
AM – AGCO Mount Kit for 2-inch pipe stand mounting of manifold (page 43)
BL – Bonnet Lock Device (page 154)
CL – Cleaned for chlorine service
HD – Hydrostatic testing (100 percent) (MSS SP-61)
MS – Monel® Stem
OC – Cleaned for oxygen service
PHB – Phenolic Black Handle
PT – Top Purge Ports (1/4-inch FNPT)
SSA1 – SS Flange Bolt (grade 18-8) - maximum pressure rating 4500 psi [310 barg]
SSB – 316 SS Flange Bolt (B8M Class 2) - will provide full pressure rating
SSC1 – 316 Flange Bolt (B8M) - maximum pressure rating 4500 psi [310 barg]
SG – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and NACE MR0103-2005 (SS valves only)
SG3 – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm])
ST – Stellite Ball Ended Stem
SP – Special Requirements - please specify

Note
1. 316 SS bolts lower pressure ratings to a
maximum of 4500 psi [310 barg]. Consult
factory for full rating with 316 SS bolts.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

42
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Liquid Level Manifolds – AGCO Mount Kits

AGCO Mount Kits

Rain Cap

5.00
[127.0]

3.00
[76.2]
4.60
[116.8]

AGCO Mount Kits are available for all manifolds where

they apply. See AM Option for each manifold.

AGCO Mount Kits for Liquid Level Manifold

Manifold Kit Material Description
Style Part Number
02.1639.501–AM Standard Kit
M4TL 02.1639.508–AM CS1 For bottom test ports
02.1639.500–AM With steam block

02.1639.505–AMS Standard Kit

M4TL 02.1639.509–AMS SS For bottom test ports
02.1639.871–AMS With CS steam block

Note
1. Zinc cobalt plated.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

43
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M1 and M110

3-Valve Manifolds

Product Overview Features and Benefits

For Applications Requiring Remote • Cost savings/less labor results when
Mounting From Instrument unitizing the manifolding. It eliminates
The M1 is a three-valve manifold designed numerous parts used in conventional
to mount to the signal lines and instrument methods of ‘piping up.’ Results in cost
when the instrument has connections reduction of 20-30 percent.
different than 21⁄8-inches [54 mm] between • Roddability characterizes the M1
signal taps such as recording orifice with soft seats for services prone to
meters, small differential pressure indicators plugging.
and some differential pressure switches. In
these applications, the manifold is often • A protective bonnet cap increases
supported by the signal lines but may be valve life by protecting against
AGCO Mount supported (-AM). atmospheric contamination; reduces
possibility of thread galling by
The M1 manifold is available with an containment of stem lubricant.
integral metal seat or with various
replaceable, roddable soft seats. The valve • Fewer leak points reduce the chances
orifice is 3/16-inch [4.8 mm] diameter. of leakage from a unitized design.

The M110 manifold is a high pressure • Packing is below stem threads.

version of the M1 and is available in Galling and corrosion of the stem
316 SS with integral seats. threads due to exposure to the process
fluid is prevented. The packing isolates
the stem threads from the process.

• Replaceable soft seat design is

bubble-tight with a 3⁄16-inch [4.8 mm]
diameter orifice as standard.

• Increased valve life is obtained by

rolling rather than cutting stem threads.
This provides a stronger, more durable
thread area.

• Integral hard back seat protects

against stem blowout and provides a
secondary packing seal.

• Stem packing is adjustable for

leakproof and long service life.

• Test ports are 1⁄4-inch FNPT ports

which may be used as test connections.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

44
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M1 Specifications

Instrument
Metal Seat Dimensions, inches [mm]
Static Static 1
/4 - 18 NPT 1
/2 - 14 NPT
(Test) (Test) Static (Test) Connections Instrument Connections
Equalize 2 Places 2 Places
A Max. Open
Block/ Block/
Isolate Isolate Block/Isolate Valve

2.88
Process [73.2]

Dimensions, inches [mm]

Packing A B ø 0.28 [7.1] 1
/2 - 14 NPT
Mounting Holes 1.12 Process 1.26 [32.0]
GRAFOIL®/ 2 Places [28.4]
10.38 4.50 Connections 1.44 [36.6]
Low Emissions 2 Places
[263.7] [114.3] 2.07 [52.6]
Graphite
9.08 3.85
Teflon®
[230.6] [97.8]

Notes B Equalizer
Max. Valve
Open
1. Approximate valve weight: 4.0 lb [1.8 kg].
0.187-inch [4.8 mm] diameter orifice.
Valve Cv 0.52 maximum.
2. CS parts are zinc cobalt plated to prevent
corrosion. 1.25 [31.8]

3. SG (Sour Gas) meets the requirements of

NACE MR0175/ISO 15156-3 Corrigendum
2 (for Chloride conditions ≤ 50 mg/l [ppm]) 2.12 [53.8]
and NACE MR0103-2005.
3.88 [98.6]
4. SG3 (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum
2 (for Chloride conditions > 50 mg/l [ppm]).

Standard Materials Pressure and Temperature Ratings

Valve1 Packing Body/Bonnet Stem/Ball Ratings
6000 psig @ 200°F [414 barg @ 93°C]
CS2 Teflon® or O-ring A108/A108 A581-303/17-4PH
4000 psig @ 500°F [276 barg @ 260°C]
GRAFOIL®/ 6000 psig @ 200°F [414 barg @ 93°C]
CS2 A105/A105 A581-303/17-4PH
Low Emissions Graphite 1500 psig @ 850°F [103 barg @ 454°C]
6000 psig @ 200°F [414 barg @ 93°C]
SS Teflon® or O-ring A479-316/A479-316 A276-316/316 SS
4000 psig @ 500°F [276 barg @ 260°C]
GRAFOIL®/ 6000 psig @ 200°F [414 barg @ 93°C]
SS A479-316/A479-316 A276-316/316 SS
Low Emissions Graphite 1500 psig @ 1000°F [103 barg @ 538°C]
6000 psig @ 200°F [414 barg @ 93°C]
Monel® Teflon® Monel® 400/Monel® R405 Monel® 400/Monel® K500
4000 psig @ 500°F [276 barg @ 260°C]
GRAFOIL®/ 6000 psig @ 200°F [414 barg @ 93°C]
Monel® Monel® 400/Monel® R405 Monel® 400/Monel® K500
Low Emissions Graphite 1500 psig @ 800°F [103 barg @ 427°C]
SG3 A479-316/A479-316 Monel® 400/Monel® K500 6000 psig @ 200°F [414 barg @ 93°C]
Teflon®
SG34 A479-316/Hastelloy® C276 Hastelloy® C276/Elgiloy® 4000 psig @ 500°F [276 barg @ 260°C]
SG3 GRAFOIL®/ A479-316/A479-316 Monel® 400/Monel® K500 6000 psig @ 200°F [414 barg @ 93°C]
SG34 Low Emissions Graphite A479-316/Hastelloy® C276 Hastelloy® C276/Elgiloy® 1500 psig @ 1000°F [103 barg @ 538°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

45
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M1 Specifications

Soft Seat Dimensions, inches [mm]

8.58 [217.9] Max. Open

1/4 - 18 NPT 2.12 1 Instrument

[53.8] /2 - 14 NPT
Static (Test) Instrument Connections
Connections 1.12 2 Places Option Option
2 Places [28.4] Bottom Bottom
Block/Isolate
Valve Equalize
Block/ Block/
Isolate Isolate
2.88
[73.2]

2.07
[52.6]
1.44 1.26 Process
[36.6] [32.0]

1
ø 0.28 [7.1] /2 - 14 NPT
Mounting Hole 2 Places Process Connections
2 Places

3.85
[97.8] Equalizer
Max. Valve
Open

1.25 [31.8]

3.38 [85.9]

Standard Materials Notes

Valve1 Body and Bonnet Stem Packing Seat 1. Approximate valve weight: 4.0 lb [1.8 kg].
0.187-inch [4.8 mm] diameter orifice.
Teflon® or Valve Cv 0.83 maximum.
CS2 A108 CS A581-303 Viton® O-ring Delrin ®4
2. CS parts are zinc cobalt plated to prevent
w/Teflon® backup corrosion.
Teflon® or 3. SG (Sour Gas) meets the requirements of
SS A479-316 A276-316 Viton® O-ring Delrin ®4 NACE MR0175/ISO 15156-3 Corrigendum 2
w/Teflon® backup (for Chloride conditions ≤ 50 mg/l [ppm]) and
NACE MR0103-2005.
SG3 A479-316 Monel® 400 Teflon® Delrin ®4
4. PCTFE (Polychlorotrifluoroethylene is exact
SG35 Hastelloy® C276 Hastelloy® C276 Teflon® Delrin ®4 equivalent of Kel-F®), PEEK, and Teflon® are
also available.
5. SG3 (Sour Gas) meets the requirements of
Seat Pressure and Temperature Ratings NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm]).
Delrin® and PCTFE4 6000 psig @ 200°F [414 barg @ 93°C]
6000 psig @ 200°F [414 barg @ 93°C]
PEEK
2000 psig @ 400°F [138 barg @ 204°C]
1000 psig @ 150°F [69 barg @ 66°C]
Teflon®
200 psig @ 500°F [14 barg @ 260°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

46
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M1 Specifications

Pressure vs. Temperature – Metal Seat

M1HIS
6000 M1HIC
[414] M1VIC
M1VIS
5000 M1VIM
[345] Denotes

Pressure psig [barg]

intersecting
4000 data
[276]

3000
[207]

2000
[138]
1500
[103]
1000
[69]

0
0 100 200 300 400 500 600 700 800 900 1000
[-18] [38] [93] [149] [204] [260] [316] [371] [427] [482] [538]
850
Temperature °F [°C] [454]

Pressure vs. Temperature – Soft Seat

Teflon®
6000 PEEK
[414] Delrin®
PCTFE
5000 Denotes
[345] intersecting
Pressure psig [barg]

data
4000
[276]

3000
[207]

2000
[138]

1000
[69]
200
[14] 0
0 100 200 300 400 500
[-18] [38] 150 [93] [149] [204] [260]
[66]
Temperature °F [°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

47
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M1 Specifications

Ordering Information Metal Seat; 3/16-inch [4.8 mm] Diameter Orifice Note
M1 H I S –4 – SG 1. Call factory for optional materials.

Packing
V – Teflon ®
H – GRAFOIL®
E – Low Emissions Graphite

Seat
I – Integral (body material)

Body Material 1
C – CS, A108 (Teflon® packed)
CS, A105 (GRAFOIL® and Low Emissions Graphite packed)
S – SS, A479-316
M – Monel®
W – 316L SS
J – Hastelloy®

Connection
4 – 1/2-inch FNPT

Options
AL – Arctic Lubricant (low temperature service -70°F) - not available for CS valves
AM – AGCO Mount Kit for 2-inch pipe stand mounting of manifold (page 80)
BC – Accessory Bracket - mount conduit with -AM
BL – Bonnet Lock Device (page 154)
BP – Accessory Bracket - mount purge meters with -AM
CL – Cleaned for chlorine service
HD – Hydrostatic testing (100 percent) (MSS SP-61)
MS – Monel® Stem
OC – Cleaned for oxygen service
PHB – Phenolic Black Handle
SG – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and NACE MR0103-2005 (SS valves only)
(not available for O-ring packed valves)
SG3 – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm])
ST – Stellite Ball Ended Stem
SP – Special Requirements - please specify

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

48
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M1 Specifications

Notes Ordering Information Soft Seat Replaceable, Roddable;

3/16-inch [4.8 mm] Diameter Orifice
1. Polychlorotrifluoroethylene is the exact
equivalent of Kel-F®.
M1 V D S – 4 – SG
2. Call factory for optional materials.

Packing
V – Teflon ®
R – O-ring (Viton®)

Seat
D – Delrin®
V – Teflon®
E – PEEK
K – PCTFE1

Body Material2
C – A108 CS
S – A479-316 SS
W – 316L SS
J – Hastelloy®

Connection
4 – 1/2-inch FNPT

Options
AL – Arctic Lubricant (low temperature service -70°F) - not available for CS valves
AM – AGCO Mount Kit for 2-inch pipe stand mounting of manifold (page 80)
BC – Accessory Bracket - mount conduit with AM
BL – Bonnet Lock Device (page 154)
BP – Accessory Bracket - mount purge meters with AM
CL – Cleaned for chlorine service
HD – Hydrostatic testing (100 percent) (MSS SP-61)
MS – Monel® Stem
OC – Cleaned for oxygen service
PHB – Phenolic Black Handle
SG – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and NACE MR0103-2005 (SS valves only)
(not available for O-ring packed valves)
SG3 – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm])
ST – Stellite Ball Ended Stem
SP – Special Requirements - please specify

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

49
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M1 ASME B31.1 or

B31.3 Specifications Meets MSS SP-1055
Ordering Information – Power Industry Applications
M1HP S –4 – XP – AM

Valve Type
M1HP

Body Material 1
C – CS, A105
S – SS, A479-316
W – 316L SS
J – Hastelloy®

Connection
4 – 1/2-inch FNPT x 1/2-inch FNPT x 1/2-inch FNPT
3TC4 – 3/8-inch Tube Stub x 1/2-inch FNPT x 1/2-inch FNPT2
3TB4 – 3/8-inch Tube S.W. x 1/2-inch FNPT x 1/2-inch FNPT
4TC4 – 1/2-inch Tube Stub x 1/2-inch FNPT x 1/2-inch FNPT3
4TB4 – 1/2-inch Tube S.W. x 1/2-inch FNPT x 1/2-inch FNPT
4B – 1/2-inch FSW x 1/2-inch FSW

Options
AM – AGCO Mount Kit for 2-inch pipe stand mounting of manifold (page 80)
SP – Special Requirements - please specify

Notes
1. All Manifolds come standard with GRAFOIL®
packing, integral seats, bonnet locks, and are
subjected to hydrostatic testing.
2. Tube Stubs are 6-inch long x 0.065-inch wall.
3. Tube Stubs are 6-inch long x 0.095-inch wall.
4. Manifold ratings:
SST
6000 psig @ 100°F [414 barg @ 38°C]
3030 psig @ 1000°F [209 barg @ 538°C]
STL
6170 psig @ 100°F [425 barg @ 38°C]
3430 psig @ 800°F [236 barg @ 427°C]
5. See page 156 for Code Requirements.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

50
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M110 Specifications

M110 Dimensions, inches [mm]

1
/4 - 18 NPT 1
/2 - 14 NPT
Instrument Static (Test) Instrument Connections
Connections 2 Places
Static Static 2 Places 9.08 [230.6]
(Test) (Test) Max. Open
Equalize Block/Isolate Valve
Block/ Block/
Isolate Isolate

2.88
[73.2]

Process
1.12
[28.4] 1 1.26 [32.0]
/2 - 14 NPT
ø 0.28 [7.1] Process Ports 1.44 [36.6]
Mounting Holes 2 Places
2 Places 2.12 2.07 [52.6]
[53.8]

3.85
[97.8]
Max. Equalizer
Open Valve

0.62 [15.7]

1.25 [31.8]

Notes Standard Materials

1. Approximate valve weight: 4 lb [1.8 kg]. Valve1 Body and Bonnet Stem and Ball Packing
0.187-inch [4.8 mm] diameter orifice.
Valve Cv 0.52 maximum. A479-316 Body A276-316 Stem
SS Teflon®
A479-316 Bonnet 316 SS Ball
2. SG (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum 2 A479-316 Body Monel® 400 Stem
(for Chloride conditions ≤ 50 mg/l [ppm]) and SG2 Teflon®
A479-316 Bonnet Monel® K500 Ball
NACE MR0103-2005.
Hastelloy® C276 Body Hastelloy® C276 Stem
3. SG3 (Sour Gas) meets the requirements of SG33 Teflon®
Hastelloy® C276 Bonnet Elgiloy® Ball
NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm]).

Pressure and Temperature Ratings

Valve1 Packing Pressure and Temperature Ratings
10,000 psig @ 200°F [689 barg @ 93°C]
SS Teflon®
4000 psig @ 500°F [276 barg @ 260°C]
SG2 10,000 psig @ 200°F [689 barg @ 93°C]
Teflon®
SG33 4000 psig @ 500°F [276 barg @ 260°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

51
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M110 Specifications

Pressure vs. Temperature

10,000
[689]
Pressure psig [barg]

8000
[552]

6000
[414]

4000
[276]

2000
[138]

0 100 200 300 400 500

[-18] [38] [93] [149] [204] [260]

Temperature °F [°C]

Ordering Information
M110 V I S –4 – SG

Packing
V – Teflon®

Seat
I – Integral (body material)

Body Material
S – SS, A479-316

Connection
4 – 1/2-inch FNPT

Options
AL – Arctic Lubricant (low temperature service -70°F) - not available for CS valves
AM – AGCO Mount Kit for 2-inch pipe stand mounting of manifold (page 80)
BC – Accessory Bracket - mount conduit with AM
BL – Bonnet Lock Device (page 154)
BP – Accessory Bracket - mount purge meters with AM
CL – Cleaned for chlorine service
HD – Hydrostatic testing (100 percent) (MSS SP-61)
MS – Monel® Stem
OC – Cleaned for oxygen service
PHB – Phenolic Black Handle
SG – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and NACE MR0103-2005
SG3 – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm])
ST – Stellite Ball Ended Stem
SP – Special Requirements - please specify

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

52
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – MM1 3-Valve

Mini-Manifold

Product Overview Features and Benefits

The MM1 is a miniature three-valve • Cost savings in both materials and
manifold for applications requiring remote labor. Manifolding the instruments
mounting from the instrument. Made in CS, eliminates several parts used in
316 SS, or brass, the MM1 features O-ring conventional methods of ‘piping up.’
or packed bonnets with soft or metal seats. Results in cost reduction of 20-30
percent.
This mini-manifold features a unique valve
seat which can be converted from soft to • Compact design requires minimum
hard by simply removing two insert space for operation and installation.
washers. No other parts are required. Particularly useful for installations behind
boards and in cabinets.
Used to set or reset differential pressure
switches during initial plant start-up. Also • Back seat stem feature prevents stem
used in assemblies for portable differential blowout.
pressure test equipment used for any
• Rolled threads on stem and bonnet
miniature differential pressure measuring
increase strength. This prevents galling
device.
and adds years to the useful life of the
valve.

• Fewer leak points means reduced

leakage by having fewer parts to
assemble.

• Teflon® packing (Teflon® Stem Seal)

is easily adjusted for leakproof and long
service life.

• Stem threads are isolated from

process (O-ring Stem Seal). This
isolation prevents galling and corrosion
of the stem threads due to exposure to
the process fluid. The O-ring isolates the
stem threads from the process.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

53
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – MM1 Specifications

Dimensions, inches [mm]

Instrument Side Instrument

1/4 - 18 NPT TYP. Equalizer Valve
4 Places
Block/Isolate Valve
1/8NPT
2 Places
1.50
[38.1] Block/ Block/
Isolate Isolate

0.25 [6.4] Process

Process Side ø 0.265 [6.7]
0.84 [21.3] 1.44 Mounting Hole
[36.6]

3.12 [79.2]
A Max. Open

B Max. Open

0.75 [19.1]

Dimensions, inches [mm]

Packing A B
5.62 2.00
O-ring
[142.7] [50.8]
6.82 2.60
Teflon®
[173.2] [66.0]

Note
1. Approximate valve weight: 1.0 lb [0.4 kg].
Optional Soft Seat 0.136-inch [3.5 mm] diameter orifice.
Valve Cv hard seat 0.25 maximum.
Valve Cv soft seat 0.24 maximum.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

54
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – MM1 Specifications

Pressure and Temperature Ratings

Valve Packing Soft Seat Soft Seat Metal Seat
Delrin®/PCTFE2 PEEK
3000 psig @ 200°F 6000 psig @ 200°F 6000 psig @ 200°F
CS1 BUNA-N O-ring
[207 barg @ 93°C] [414 barg @ 93°C] [414 barg @ 93°C]
6000 psig @ 200°F 6000 psig @ 200°F
3000 psig @ 200°F [414 barg @ 93°C] [414 barg @ 93°C]
CS1 Teflon®
[207 barg @ 93°C] 3000 psig @ 300°F 4000 psig @ 500°F
[207 barg @ 149°C] [276 barg @ 260°C]
3000 psig @ 200°F 3000 psig @ 200°F 3000 psig @ 200°F
Brass BUNA-N O-ring
[207 barg @ 93°C] [207 barg @ 93°C] [207 barg @ 93°C]
3000 psig @ 200°F 3000 psig @ 300°F 3000 psig @ 400°F
Brass Teflon®
[207 barg @ 93°C [207 barg @ 149°C] [207 barg @ 204°C]
3000 psig @ 200°F 6000 psig @ 200°F 6000 psig @ 200°F
SS Viton® O-ring
[207 barg @ 93°C] [414 barg @ 93°C] [414 barg @ 93°C]
6000 psig @ 200°F 6000 psig @ 200°F
3000 psig @ 200°F [414 barg @ 93°C] [414 barg @ 93°C]
SS Teflon®
[207 barg @ 93°C] 3000 psig @ 300°F 4000 psig @ 500°F
[207 barg @ 149°C] [276 barg @ 260°C]
6000 psig @ 200°F 6000 psig @ 200°F
SG3 3000 psig @ 200°F [414 barg @ 93°C] [414 barg @ 93°C]
Teflon®
SG34 [207 barg @ 93°C] 3000 psig @ 300°F 4000 psig @ 500°F
[207 barg @ 149°C] [276 barg @ 260°C]

Notes Standard Materials

1. CS is zinc cobalt plated to prevent corrosion. Valve Body Bonnet Stem Flow Washer4
2. PCTFE (Polychlorotrifluoroethylene) is the
CS1 A108 A108 A581-303 316
exact equivalent of Kel-F®.
3. SG (Sour Gas) meets the requirements of Brass B16 B16 A581-303 316
NACE MR0175/ISO 15156-3 Corrigendum 2 SS A276-316 A479-316 A276-316 316
(for Chloride conditions ≤ 50 mg/l [ppm]) and
NACE MR0103-2005. SG3 A276-316 A479-316 Monel® R405 316

4. Soft seated valves only. SG35 Hastelloy® C276 Hastelloy® C276 Hastelloy® C276 Hastelloy® C276
5. SG3 (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm]).

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

55
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – MM1 Specifications

Pressure vs. Temperature Notes

1. PCTFE (Polychlorotrifluoroethylene) is the
Delrin®/PCTFE1
exact equivalent of Kel-F®.
PEEK (O-ring Packed)2
Metal Seat (O-ring Packed)2 2. Brass valve rating is 3000 psig @ 200°F
6000 PEEK (Teflon® Packed)3 [207 barg @ 93°C].
[414] 3. Brass valve rating is 3000 psig @ 300°F
Metal Seat (Teflon® Packed)4
Denotes intersecting data [207 barg @ 148°C].
5000
[345] 4. Brass valve rating is 3000 psig @ 400°F
[207 barg @ 204°C].
Pressure psig [barg]

4000
[276]

3000
[207]

2000
[138]

1000
[69]

0 100 200 300 400 500

[-18] [38] [93] [149] [204] [260]

Temperature °F [°C]

Ordering Information Note

MM1 V D S –2 – SG 1. Not available with AGCO Mount kit.

Packing
V – Teflon®
R – O-ring

Seat
D – Delrin®
K – PCTFE (Polychlorotrifluoroethylene is
the exact equivalent of Kel-F®)
E – PEEK
I – Integral (body material)

Body Material
C – CS, A108
B – Brass B16
S – SS, A276-316
J – Hastelloy®

Connection
2 – 1/4-inch FNPT

Options1
SG – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and NACE MR0103-2005 - (SS valves only)
(not available for O-ring packed valves)
SG3 – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm])

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

56
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifold – A22N

Product Overview Features and Benefits

Designed for remote mounting an • Remote mounting compact design
instrument via threaded process and requires a minimum of space for
instrument connections, the A22N has two operation and installation with fewer
block valves, an equalizer valve and two potential leak points.
instrument side vent/calibrate valves.
• Installation costs are reduced by
Process and instrument side connections
manifolding the valves, thereby
are available either 1/4-inch or 1/2-inch
eliminating several components
threaded. Vent connections are threaded
1/4-inch on all manifolds and provided with essential for ‘piping-up.’
blanking plugs. The instrument connections • Ball end stem is free-swiveling which
are positioned on 21/8-inch [54 mm] ensures perfect alignment, providing
centers but can easily be adapted to suit repetitive bubble-tight shutoff and
instruments with other center-to-center long life.
dimensions via screwed fittings. Suitable for
pressures of up to 6000 psig [414 barg] and • Teflon® or Graphite packing below
temperatures of up to 1000°F [538°C]. the stem threads prevents lubricant
washout and thread corrosion.
Applications
• Back seat stem prevents stem
• Remote mounting differential pressure blowout or accidental removal while in
transmitters. operation.
• Instrument isolation and zeroing. • Threaded vent ports allow vent to be
• Instrument venting. safely piped away, supplied plugged as
standard.
• Instrument calibration.
• Manifold mounting, all manifolds are
• Liquid and vapor service. supplied with mounting holes as
standard to enable pipe bracket
• Instruments with other than 21/8-inch
mounting.
[54 mm] centers.

• Differential Pressure changes.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

57
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifold – A22N Specifications

Dimensions, inches [mm] Threaded x Threaded

1/4 - 18 NPT
1 /2
- 14 NPT
Vent/Test Port (2)
Instrument Ports
(supplied plugged)
Equalizer Valve

2.5 [63.5] 4.52

[115] Vent Valve Vent Valve

1.36
[34.5]

Block/ Block/
Isolate 2.12 [54] Isolate
Valve Valve
1.12 [28.6] 3.54 [90] 1/2- 14 NPT
Process Ports
5.0 [127]
3.74 [95] Max.Open
10.24 [260] Max.Open

Standard Materials AGCO Mount MB8

Valve1 Body Bonnet Stem Ball Seat A22N is available with a mounting bracket
MB8 suitable for 2-inch [50 mm] pipe
CS2 A108 A108 303 SS 17-4PH stand. Supplied in zinc plated CS as
SS SS, A479 316 316 SS 316 SS 316 SS standard.

Monel® Monel® 400 Monel® 400 Monel® 400 Monel® K500

SG3 A479 316 316 SS Monel® 400 Monel® K500
SG34 Hastelloy® C276 Hastelloy® C276 Hastelloy® C276 Elgiloy®

Instrument
Special Severe Service Materials 0.6 [15]
Vent/Test Vent/Test
Duplex UNS S31803
6MO UNS S31254
Hastelloy® C276 4.9
Block/ Equalize Block/ [125]
Incoloy® 825 Isolate Isolate

For any other material requirements, please

consult the factory.
Process
2.4
Notes [60]

1. Approximate valve weight: 6.0 lb [2.7 kg].

0.187-inch [4.8 mm] diameter orifice.
Valve Cv 0.52 maximum.
2. For CS valves, non-wetted parts are all CS
zinc plated to resist corrosion. 1.8
3. SG (Sour Gas) meets the requirements of [45]
NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and
NACE MR0103-2005.
4. SG3 (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum
2 (for Chloride conditions > 50 mg/l [ppm]).

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

58
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifold – A22N Specifications

Valve Bonnet Identification Connections1

Dust Cap Coding: The valve bonnet dust Standard Connections
caps are color coded to identify the gland Process Threaded 1/2-inch NPT to
packing/stem. ANSI/ASME B1.20.1.

White: Standard bonnet assembly Instrument Threaded 1/2-inch NPT to

Teflon® packing. ANSI/ASME B1.20.1.

Green: Sour Gas service Teflon® Vent Threaded 1/4-inch NPT to

packing. ANSI/ASME B1.20.1.

Ring Labels: The valve bonnets have Other Connections

color coded ring labels for service Threaded BSP Tr to BS21
identification. BSP F to BS2779

Red: Vent Valves Please consult the factory for availability.

Blue: Isolate Valves

Note
Green: Equalize Valves
1. Threaded connection: vent supplied with
blanking plug as standard.

Pressure and Temperature Ratings Pressure vs. Temperature

Valve Teflon® Bonnet
CS, SS
6000 psig @ 200°F [414 barg @ 93°C] A22NHIS
and
4000 psig @ 500°F [276 barg @260°C] 6000
A22NEIS
Monel ®
[414] A22NHIC
A22NEIC
5000 A22NVIC
Valve High Temperature [345] A22NVIS
Pressure psig [barg]

A22NVIM
6000 psig @ 200°F [414 barg @ 93°C] 4000 Denotes
CS [276]
1500 psig @ 850°F [103 barg @454°C] intersecting
data
6000 psig @ 200°F [414 barg @ 93°C] 3000
SS
1500 psig @1000°F [103 barg @538°C] [207]

2000
[138]
1500
[103]
1000
[69]

0 100 200 300 400 500 600 700 800 900 1000
[-18] [38] [93] [149] [204] [260] [316] [371] [427] [482] [538]
850
Temperature °F [°C] [454]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

59
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifold – A22N Specifications

Ordering Information

A22N V I S –4 – SG

Bonnet Packing
V – Teflon®
H – Graphite

Seat
I – Integral

Body Material
C – CS, A108
S – SS, 316
M – Monel® 400

Process/Instrument Connections
2 – 1/4-inch FNPT
4 – 1/2-inch FNPT

Options
AL – Arctic Lubricant (low temperature service -70°F) - not available for CS valves
AT – Tamper-proof Bonnet
BL – Bonnet Lock Device (Accessories, page 154)
HP – 10,000 psig [689 barg]
K – Key for -AT
LAT – Lockable Tamper-proof Bonnet
MB8 – AGCO Mount Kit for 2-inch pipe stand mounting (page 80)
OC – Cleaned for oxygen service
PD – Padlock for -LAT
SG – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and NACE MR0103-2005 (SS valves only)
SG3 – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm])
ST – Stellite Ball Ended Stem
SP – Special Requirements - please specify

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

60
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M3A Equalizer

Manifold

Product Overview Features and Benefits

The M3A Equalizer Manifold is designed • Cost savings are realized by
for use with differential pressure manifolding the instrument, which
transmitters where low-cost direct eliminates several parts used in
coupling is desired and piping conventional methods of ‘piping-up.’
specifications require individual block Construction savings of 20-30 percent
valves. The valve is Teflon® -packed and may be realized.
uses a self-aligning SS ball seat. This
• Compact design requires minimum
single valve serves to equalize the
space for operation and installation.
transmitter.
• Fewer connections reduces leakage
The M3A fits between the transmitter and
by having fewer parts to assemble.
the 2-bolt flanges (futbols). For complete
mounting, each manifold package • Adjustable stem packing results in
includes two Teflon® or GRAFOIL® long, leak-proof service.
gaskets and four 7/16-inch – 20 x 21/2-inch
zinc cobalt plated alloy steel bolts. • Increased valve life results from rolled
stem threads rather than cut, providing
a stronger, more durable thread area.

• Integral hard back seat protects

against stem blowout.

• Free-swiveling ball end stem (metal

seat) provides bubble-tight, metal-to-
metal valve closure without seat galling.

• Packing below stem threads prevents

galling and corrosion of the stem
threads exposed to process fluid.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

61
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M3A Specifications

Dimensions, inches [mm]

2.12 [54.0] 0.62 [15.7] Instrument

Equalize

3.07 [78.0] GRAFOIL® Packed

2.43 [61.7] Teflon® Packed
Process
1.50 [38.1] Maximum Open
1.66 [42.2]

Equalizer
Valve
Instrument Side

Process Side

0.48 [12.2]
0.96 [24.4]

Standard Materials Notes

Valve1 Body Bonnet Stem Ball Packing 1. Approximate valve weight: 1.5 lb [0.7 kg].
0.187-inch [4.8 mm] diameter orifice.
CS2 A108 CS A105 A581-303 SS 17-4 PH Teflon® Valve Cv 0.52 maximum.
CS2 A108 CS A105 A581-303 SS 17-4 PH GRAFOIL® 2. CS parts are zinc cobalt plated to prevent
corrosion.
316 SS A479-316 SS A479-316 SS A276-316 SS 316 SS Teflon®
3. SG (Sour Gas) meets the requirements of
316 SS A479-316 SS A479-316 SS A276-316 SS 316 SS GRAFOIL® NACE MR0175/ISO 15156-3 Corrigendum 2
SG3 A479-316 SS A479-316 SS Monel® 400 Monel® K500 Teflon® (for Chloride conditions ≤ 50 mg/l [ppm])
and NACE MR0103-2005.
SG3 A479-316 SS A479-316 SS Monel® 400 Monel® K500 GRAFOIL®
4. SG3 (Sour Gas) meets the requirements of
SG34 Hastelloy® C276 Hastelloy® C276 Hastelloy® C276 Elgiloy® Teflon® NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm]).

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

62
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M3A Specifications

Pressure and Temperature Ratings Pressure vs. Temperature

Valve Teflon® Packed
M3AHIS/M3AEIS
6000 psig @ 200°F 6000 M3AHIC/M3AEIC
[414 barg @ 93°C] [414] M3AVIC
CS M3AVIS
4000 psig @ 500°F
5000
[276 barg @ 260°C] Denotes
[345]

Pressure psig [barg]

intersecting data
6000 psig @ 200°F
4000
[414 barg @ 93°C] [276]
316 SS
4000 psig @ 500°F
[276 barg @ 260°C] 3000
[207]
6000 psig @ 200°F
SG [414 barg @ 93°C] 2000
[138]
SG3 4000 psig @ 500°F 1500
[276 barg @ 260°C] [103]
1000
[69]
Valve GRAFOIL® Packed
0
6000 psig @ 200°F
[414 barg @ 93°C] 0 100 200 300 400 500 600 700 800 900 1000
CS [-18] [38] [93] [149] [204] [260] [316] [371] [427] [482] [538]
1500 psig @ 850°F
850
[103 barg @ 427°C] Temperature °F [°C] [454]
6000 psig @ 200°F
[414 barg @ 93°C]
316 SS
1500 psig @1000°F Ordering Information
[103 barg @ 538°C]
M3A V I S – SG
6000 psig @ 200°F
SG [414 barg @ 93°C]
SG3 1500 psig @1000°F
Packing
[103 barg @ 538°C]
V – Teflon ®
H – GRAFOIL®
E – Low Emissions Graphite

Seat
I – Integral (body material)

Body Material
C – CS1, A108
S – SS, A479-316
J – Hastelloy®

Options
SG – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and NACE MR0103-2005 (SS valves only)
SG3 – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm])
SP – Special Requirements - please specify

Note
1. CS parts are zinc cobalt plated to prevent
corrosion.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

63
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds - M4A and M4T

3-Valve Manifolds
• Fugitive emissions. To meet low
fugitive emissions requirements, special
Graphite sealed bonnets are available.

• Fewer parts means fewer leak points

which mean fewer fugitive emissions.

• Manifold mounts directly to the

pipe stand. The AGCO Mount supports
the transmitter and allows loop
installation to be completed without the
transmitter. Instrument removal for
service or repair does not disturb
M4A M4T installation.

• Teflon®, GRAFOIL®, or Graphite

packing adjusts easily. Decreases
downtime and increases valve life.

• Integral hard back seat protects

against stem blowout and forms a
secondary seal.

Product Overview Features and Benefits • Protective bonnet cap (Teflon®

Our M4 Manifold is a three-valve unit • Cost savings/less labor results when packed only) increases valve life by
designed for mounting on differential unitizing the manifolding. It eliminates protecting against atmospheric
pressure transmitters having 21/8-inch numerous parts used in conventional contamination; reduces possibility of
[54 mm] center-to-center connections. methods of ‘piping up.’ Results in cost thread galling by containment of stem
reduction of 20-30 percent. lubricant.
For direct or remote mounting, the M4A
permits the transmitter’s futbol flanges to • Stem backout prevention eliminates
connect the process signal lines to the stem blowout, or accidental removal
manifold directly, with either 1/2-inch pipe or while in operation.
tubing connections. It contains two main
• Bonnet-to-body seal is metal-to-metal
block valves and an equalizing valve.
in constant compression below the
For close or remote mounting, the M4T bonnet threads. This prevents bonnet
Manifold is used in applications where thread process corrosion, eliminates
direct coupling to orifice flanges is not tensile breakage of bonnet, and creates
desired. On the instrument side, the M4T a reliable seal point.
bolts directly to the transmitter. On the
• Roddability of soft seated valves
process side, two 1/2-inch NPT or AGCO-
means impulse lines can be cleaned
Tube connections are provided for piping or
without using purge. Simplifies
tubing into the flange taps.
maintenance and helps ensure
measurement accuracy.

General Mounting Techniques • Field-replaceable soft seats allow

replacement of seat inserts without
The M4A mounts either directly at the
removing the valve from the line.
orifice flange union or to a 2-inch pipe
stand using the AGCO Mount kit. • Stem finish is burnished to a 16 RMS
mirror finish in the packing area. Enables
The M4T is designed for remote mounting
smooth stem operation and extended
on a 2-inch pipe stand and using the AGCO
packing life.
Mount kit.
• Rolled threads provide additional
thread strength because the stem and
bonnet threads are rolled, not cut.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

64
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M4A and M4T

Specifications
M4A Metal Seat (Soft Seat available) Dimensions, inches [mm]

1.62
3.40 [86.4] [41.1]
1/4 - 18 NPT Purge Instrument Side
Connections
(Optional)
Top Purge and
Metal Seat Only 2.21 Equalizer 1.57
[56.1] Valve [39.9]
Block/
Isolate
Valve
2.31 [58.7]

3.75 [95.3]
0.68 [17.3]

1/4 -18 NPT Static

0.28 [7.1]
Mounting Holes Process (Test) Ports Bottom
3 Places Side (–TB option) B Max. Open
1.30
[33.0]
2.12 [53.8]
C
A Max. Open

Instrument Dimensions, inches [mm]

Valve1 A B C
Option Option
Bottom Bottom Soft Seat – Teflon® Packed 8.60 [218] 3.20 [81] 1.06 [27]
Equalize
Metal Seat – Teflon® Packed 8.60 [218] 3.20 [81] 2.80 [71]
Block/ Block/
Isolate Isolate Metal Seat – GRAFOIL® Packed 9.90 [251] 3.85 [98] 2.80 [71]

Note
Process 1. Approximate valve weight: 4.7 lb [2.1 kg].
Metal Seat:
0.156-inch [4.0 mm] diameter orifice.
Valve Cv 0.36 maximum.
Soft Seat:
0.187-inch [4.8 mm] diameter orifice.
Valve Cv 0.83 maximum.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

65
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M4A and M4T

Specifications
M4T Soft Seat (Metal Seat available) Dimensions, inches [mm]
1.62
3.40 1/4 -18
NPT Static (Test) [41.1]
[86.4] 0.81 [20.6]
Ports Bottom (–TB option)
Instrument Side

Equalizer
Valve
Block/
Isolate 1.64
Valve 2.41 [41.7]
[61.2]

2.38 [60.5]

3.67
[93.2]
0.94 [23.9]

Process B Max. Open

Connections Process Side
0.38 [9.7]
(See ordering information
for further details) 2.12 [53.8] Mounting Holes
2 Places
A Max. Open

Dimensions, inches [mm] Instrument

Valve1 A B
Option Option
Soft Seat – Teflon® Packed 8.60 [218] 3.20 [81] Bottom Bottom
Equalize
Metal Seat – Teflon® Packed 8.60 [218] 3.20 [81]
Block/ Block/
Metal Seat – GRAFOIL® Packed 9.90 [251] 3.85 [98] Isolate Isolate

Note
1. Approximate valve weight: 4.5 lb [2.0 kg]. Process
Metal Seat:
0.187-inch [4.8 mm] diameter orifice.
Valve Cv 0.36 maximum.
Soft Seat:
0.187-inch [4.8 mm] diameter orifice.
Valve Cv 0.83 maximum.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

66
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M4A and M4T

Specifications
Notes Standard Materials
1. Instrument mounting kit furnished with the Metal Seat
M4 includes (4) A193-B7 bolts and (2)
Valve Body1 Bonnet Stem Ball
Teflon® or GRAFOIL® flange gaskets to
match bonnet packing. CS2 A576-10L18 A108 CS A581-303 17-4 PH
2. CS parts are zinc cobalt to prevent
CS2 A576-10L18 A105 CS A581-303 17-4 PH
corrosion.
3. SG (Sour Gas) meets the requirements of SS A479-316 A479-316 A276-316 316 SS
NACE MR0175/ISO 15156-3 Corrigendum 2 SG3 A479-316 A479-316 Monel® 400 Monel® K500
(for Chloride conditions ≤ 50 mg/l [ppm]) and
NACE MR0103-2005. Monel® Monel® 400 Monel® R405 Monel® 400 Monel® K500

4. SG3 (Sour Gas) meets the requirements of Hastelloy® Hastelloy® C276 Hastelloy® C276 Hastelloy® C276 Elgiloy®
NACE MR0175/ISO 15156-3 Corrigendum 2 SG34 Hastelloy® C276 Hastelloy® C276 Hastelloy® C276 Elgiloy®
(for Chloride conditions > 50 mg/l [ppm]).
5. 316 SS bolts lower pressure ratings to a Soft Seat
maximum of 4500 psi [310 barg]. Consult
factory for full rating with 316 SS bolts. Valve Body Bonnet Stem Seat
CS2 A576-10L18 A108 CS A581-303 Delrin®
SS A479-316 A479-316 A276-316 Delrin®
SG3 A479-316 A479-316 Monel® 400 Delrin®
SG34 Hastelloy® C276 Hastelloy® C276 Hastelloy® C276 Delrin®

Pressure and Temperature Ratings

Metal Seat

Valve Packing Ratings5

6000 psig @ 200°F [414 barg @ 93°C]
CS2 Teflon®
4000 psig @ 500°F [276 barg @ 260°C]
GRAFOIL® 6000 psig @ 200°F [414 barg @ 93°C]
CS2
Graphite 4000 psig @ 600°F [276 barg @ 316°C]
6000 psig @ 200°F [414 barg @ 93°C]
SS Teflon®
4000 psig @ 500°F [276 barg @ 260°C]
Graphite 6000 psig @ 200°F [414 barg @ 93°C]
SS
GRAFOIL® 1500 psig @ 1000°F [103 barg @ 538°C]
SG3 or 6000 psig @ 200°F [414 barg @ 93°C]
Teflon®
SG34 4000 psig @ 500°F [276 barg @ 260°C]
SG3 or 6000 psig @ 200°F [414 barg @ 93°C]
GRAFOIL®
SG34 1500 psig @ 1000°F [103 barg @ 538°C]
5300 psig @ 200°F [360 barg @ 93°C]
Monel® Teflon®
4200 psig @ 500°F [290 barg @ 260°C]
6000 psig @ 200°F [414 barg @ 93°C]
Hastelloy® Teflon®
4000 psig @ 500°F [276 barg @ 260°C]

Soft Seat

Valve Packing Ratings5

Teflon®
CS2
Viton® O-ring with 6000 psig @ 200°F [414 barg @ 93°C]
SS
Teflon® back up ring
SG3 or
Teflon® 6000 psig @ 200°F [414 barg @ 93°C]
SG34

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

67
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M4A and M4T

Specifications
Pressure vs. Temperature – Metal Seat Note
1. 316 SS bolts lower pressure ratings to a
M4__VIC maximum of 4500 psi [310 barg]. Consult
M4__VIS
factory for full rating with 316 SS bolts.
6000 M4__VIJ
[414] M4__HIS
5300
[360]
M4__EIS
5000
M4__HIC
[345]
M4__EIC
Pressure psig [barg]

4200
[290] 4000 M4__VIM
[276] Denotes
intersecting
3000 data
[207]

2000
[138]
1500
[103]
1000
[69]

0
0 100 200 300 400 500 600 700 800 900 1000
[-18] [38] [93] [149] [204] [260] [316] [371] [427] [482] [538]

Temperature °F [°C]

Pressure vs. Temperature – Soft Seat

Teflon®
6000 PEEK
[414] Delrin®
PCTFE
5000 Denotes
[345] intersecting
Pressure psig [barg]

data
4000
[276]

3000
[207]

2000
[138]

1000
[69]
200
[14] 0
0 100 200 300 400 500
[-18] [38] 150 [93] [149] [204] [260]
[66]
Temperature °F [°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

68
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M4A and M4T

Specifications
Notes Ordering Information – Soft Seat
1. 316 SS bolts lower pressure ratings to a
M4T V D S –4 – SG
maximum of 4500 psi [310 barg]. Consult
factory for full rating with 316 SS bolts.
2. Integral tube fitting design, refer to page 75. Valve Type
3. CS parts are zinc cobalt plated to prevent M4A – 3-Valve Manifold, Flange x Flange
corrosion. M4T – 3-Valve Manifold, FNPT x Flange

Bonnet Packing
V – Teflon® R – O-ring (Viton®)

Seat
D – Delrin® K – PCTFE
E – PEEK V – Teflon®

Body Material
C – CS3, A576-10L18 W – SS, A479-316L
S – SS, A479-316 J – Hastelloy®

Process Connections (M4T only)

4 – 1/2-inch FNPT
AT2 – Integral Single Ferrule Tube Fittings ATD2 – Integral Dual Ferrule Tube Fittings
- 4AT 1/2-inch, 316 SS - 4ATD 1/2-inch, 316 SS

Options

AL – Arctic Lubricant (low temperature service -70°F) - not available for CS valves
AM – AGCO Mount Kit for 2-inch pipe stand mounting of manifold (page 80)
BC – Accessory Bracket - mount conduit with -AM
BL – Bonnet Lock Device (page 154)
BP – Accessory Bracket - mount purge meters with -AM
CL – Cleaned for chlorine service
HD – Hydrostatic testing (100 percent) (MSS SP-61)
MS – Monel® Stem standard on Monel® and SG valves)
OC – Cleaned for oxygen service
PHB – Phenolic Black Handle
R3V – Add for use with Rosemount® Model 3051C (SS 18-8 Bolts)
SB – Steam Block (CS)
SSA1 – SS Flange Bolt (grade 18-8) - maximum pressure rating 4500 psi [310 barg]
SSB – 316 SS Flange Bolt (B8M Class 2) - will provide full pressure rating
SSC1 – 316 Flange Bolt (B8M) - maximum pressure rating 4500 psi [310 barg]
SG – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and NACE MR0103-2005 (SS valves only)
(not available for O-ring packed valves)
SG3 – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm])
TB – Test Ports - bottom of manifold (1/4-inch FNPT) (option not available for M4A with -AM)
SP – Special Requirements - please specify

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

69
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M4A and M4T

Specifications
Ordering Information – Metal Seat Notes
1. Integral tube fitting design, refer to page 75.
M4T V I S –4 – SG
2. 316 SS bolts lower pressure ratings to a
maximum of 4500 psi [310 barg]. Consult
Valve Type factory for full rating with 316 SS bolts.

M4A – 3-Valve Manifold, Flange x Flange

M4T – 3-Valve Manifold, FNPT x Flange

Bonnet Packing
V – Teflon®
H – GRAFOIL®
E – Low Emissions Graphite (except M45A)

Seat
I – Integral (body material)

Body Material
C – CS, A576-10L18 W – SS, A479-316L
S – SS, A479-316 J – Hastelloy®
M – Monel® 400 (M4A and M4T only)

Process Connections (M4T only)

4 – 1/2-inch FNPT
AT2 – Integral Single Ferrule Tube Fittings ATD2 – Integral Dual Ferrule Tube Fittings
- 4AT 1/2-inch, 316 SS - 4ATD 1/2-inch, 316 SS

Options
AL – Arctic Lubricant (low temperature service -70°F) - not SSA2 – SS Flange Bolt (grade 18-8) - maximum pressure rating
available for CS valves 4500 psi [310 barg]
AM – AGCO Mount Kit for 2-inch pipe stand mounting of manifold SSB – 316 SS Flange Bolt (B8M Class 2) - will provide full pressure
(page 80) rating
BC – Accessory Bracket - mount conduit with -AM SSC2 – 316 Flange Bolt (B8M) - maximum pressure rating 4500 psi
BL – Bonnet Lock Device (page 154) [310 barg]

BP – Accessory Bracket - mount purge meters with -AM SG – (Sour Gas) meets the requirements of NACE MR0175/ISO
15156-3 Corrigendum 2 (for Chloride conditions ≤ 50 mg/l
CL – Cleaned for chlorine service [ppm]) and NACE MR0103-2005 (SS valves only) (not
HD – Hydrostatic testing (100 percent) (MSS SP-61) available for O-ring packed valves)
LP – Street Elbows and Top Purge Ports SG3 – (Sour Gas) meets the requirements of NACE MR0175/ISO
15156-3 Corrigendum 2 (for Chloride conditions > 50 mg/l
MS – Monel® Stem (standard on Monel® and SG valves)
[ppm])
OC – Cleaned for oxygen service
ST – Stellite Ball Ended Stem
PB – Bottom Purge Ports (1/4-inch FNPT) (Metal Seat only)
TB – Test Ports - bottom of manifold (1/4-inch FNPT) (option not
(option not available with -SB or M4A with -AM)
available for M4A with -AM)
PHB – Phenolic Black Handle
TR68 – Add for use with Rosemount® models 1151DP 6, 7, 8 and
PT – Top Purge Ports (1/4-inch FNPT) (Metal Seat only) (if elbows 1151HP 6, 7, 8 and any DP transmitter with bolt spacing
are required, specify -LP, not -PT) between 2.125-inch [54 mm] and 2.281-inch [58 mm]
R3V – Add for use with Rosemount® Model 3051C (SS 18-8 Bolts) (Metal Seat only)

SB – Steam Block (CS) SP – Special Requirements - please specify

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

70
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M4A and M4T ASME

B31.1 or B31.3 Meets MSS SP-1054
Ordering Information – Power Industry Applications2

M4THP S –4 –XP – SG

Valve Type
M4AHP – 3-Valve Manifold, Flange x Flange
M4THP – 3-Valve Manifold, FNPT x Flange

Body Material
S – SS, A479-3163

Connections (Process x Instrument x Vent)

4 – 1/2-inch FNPT x Flange x 1/4-inch FNPT
4AT – 1/2-inch AGCO Tube x Flange x 1/4-inch FNPT
4B – 1/2-inch Pipe S.W. x Flange x 1/4-inch FNPT

4TB – 1/2-inch Tube S.W. x Flange x 1/4-inch FNPT

Options
AM – AGCO Mount Kit for 2-inch pipe stand mounting of manifold (table, page 80)
SSA6 – SS Flange Bolt (grade 18-8) - maximum pressure rating 4500 psi [310 barg]
SSB – 316 SS Flange Bolt (B8M Class 2) - will provide full pressure rating
SSC6 – 316 Flange Bolt (B8M) - maximum pressure rating 4500 psi [310 barg]
TB – Test Ports - bottom of manifold (1/4-inch FNPT) (option not available for M4A
with -AM)
SP – Special Requirements - please specify

Notes
1. Integral tube fitting design, refer to page 75.
2. All Manifolds come standard with GRAFOIL®
packing, integral seats, bonnet locks, and are
subjected to hydrostatic testing.
3. Manifold ratings:
SST
6000 psig @ 100°F [414 barg @ 38°C]
3030 psig @ 1000°F [236 barg @ 538°C]
4. See page 156 for Code Requirements.
5. Test bottom ports standard.
6. 316 SS bolts lower pressure ratings to a
maximum of 4500 psi [310 barg]. Consult
factory for full rating with 316 SS bolts.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

71
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M45A Specifications

Product Overview
Our M45A manifold is a three-valve unit
with 3/8-inch [9.5 mm] orifice block valves
designed for mounting on differential
pressure transmitters having 21/8-inch
[54 mm] center-to-center connections.

For direct or remote mounting, the M45A

permits the transmitter’s futbol flanges to
connect the process signal lines to the
manifold directly, with either 1/2-inch pipe
or tubing connections. It contains two main
block valves and an equalizing valve.

Same as M4A except bonnet to

accommodate 3/8-inch [9.5 mm] orifice soft
seat block valves and metal seat equalizer
valve.

Dimensions, inches [mm]

1.62
[41.1]
Instrument Side
Equalizer
Valve
Block/Isolate 1.80
Valve [45.7]

3.80
[96.5]

Process Side 1.10

[27.9]
2.12 [53.8] B Max. Open
3.88 [98.6]

A Max. Open

Dimensions, inches [mm] Instrument

Packing A B
11.90 3.40
Teflon® Equalize
[302.3] [86.4]
Block/ Block/
11.90 4.05 Isolate Isolate
GRAFOIL®
[302.3] [102.9]
11.36 3.40
O-ring
[288.5] [86.4]
Process

Note
1. Bottom static (test) connection available.
See options, page 74.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

72
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M45A Specifications

Notes Standard Materials

1. Approximate valve weight: 7.1 lb [3.2 kg]. Valve1 Body Bonnet Stem
0.375-inch [9.5 mm] diameter orifice. Block Equalizer
Valve Cv 3.0 maximum.
Valve Valve2
2. Equalizer valve utilizes free-swiveling
ball ended stem. Equalizer orifice size 0.187- CS4 A105 A108 A108 A582-303
inch [4.8 mm].
CS4 A105 A108 A105 A582-303
3. PCTFE (Polychlorotrifluoroethylene is exact
SS A479-316 A479-316 316 A276-316
equivalent of Kel-F®), PEEK and Teflon® also
available. SS A479-316 A479-316 316 A276-316
4. CS is zinc cobalt plated to resist corrosion. SG5 A479-316 A479-316 316 Monel®
5. SG (Sour Gas) meets the requirements of
SG36 Hastelloy® C276 Hastelloy® C276 Hastelloy® C276 Hastelloy® C276
NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and
NACE MR0103-2005. Pressure and Temperature Ratings7
6. SG3 (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum 2 Valve Packing Seat Pressure and Temperature Ratings
(for Chloride conditions > 50 mg/l [ppm]).
CS4 Teflon® Delrin®3 6000 psig @ 200°F [414 barg @ 93°C]
7. 316 SS bolts lower pressure ratings to a
maximum of 4500 psi [310 barg]. Consult CS4 GRAFOIL® SS 1500 psig @ 850°F [103 barg @ 454°C]
factory for full rating with 316 SS bolts. SS Teflon® Delrin® 6000 psig @ 200°F [414 barg @ 93°C]
SS GRAFOIL® SS 1500 psig @ 1000°F [103 barg @ 538°C]
SG5
Teflon® Delrin®3 6000 psig @ 200°F [414 barg @ 93°C]
SG36

Pressure vs. Temperature

PCTFE
Teflon®
6000 Delrin®
[414]
Metal seat,
5000 GRAFOIL® packed
[345] PEEK
Pressure psig [barg]

Metal seat, Teflon®

4000 packed
[276]
Denotes
intersecting data
3000
[207]

2000
[138]
1500
[103]
1000
[69]
200
[14] 0

0 100 200 300 400 500 600 700 800 900 1000
[-18] [38] [93] [149] [204] [260] [316] [371] [427] [482] [538]
150 850
[66] Temperature °F [°C] [454]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

73
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M45A Specifications

Ordering Information – Soft Seat Note

1. 316 SS bolts lower pressure ratings to a
M45A V D S – SG
maximum of 4500 psi [310 barg]. Consult
factory for full rating with 316 SS bolts.
Valve Type
M45A – 3-Valve Manifold, Flange x Flange

Bonnet Packing
V – Teflon®
R – O-ring (Viton®) Block Valve only
H – GRAFOIL®

Seat
D – Delrin® S – 316 SS
E – PEEK V – Teflon®
K – PCTFE J – Hastelloy®

Body Material
C – CS, A576-10L18
S – SS, A479-316
W – SS, A479-316L
J – Hastelloy®

Options
AL – Arctic Lubricant (low temperature service -70°F) - not available for CS valves
AM – AGCO Mount Kit for 2-inch pipe stand mounting of manifold (page 80)
BC – Accessory Bracket - mount conduit with -AM
BL – Bonnet Lock Device (page 154)
BP – Accessory Bracket - mount purge meters with -AM
CL – Cleaned for chlorine service
HD – Hydrostatic testing (100 percent) (MSS SP-61)
MS – Monel® Stem (standard on Monel® and SG valves)
OC – Cleaned for oxygen service
PHB – Phenolic Black Handle
R3V – Add for use with Rosemount® Model 3051C (SS 18-8 Bolts)
SSA1 – SS Flange Bolt (grade 18-8) - maximum pressure rating 4500 psi [310 barg]
SSB – 316 SS Flange Bolt (B8M Class 2) - will provide full pressure rating
SSC1 – 316 Flange Bolt (B8M) - maximum pressure rating 4500 psi [310 barg]
SG – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and NACE MR0103-2005 (SS valves only)
(not available for O-ring packed valves)
SG3 – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm])
ST – Stellite Ball Ended Stem
TB – Test Ports - bottom of manifold (1/4-inch FNPT) (option not available for M4A
with -AM)
SP – Special Requirements - please specify

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

74
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M4, M4T and M45A

Options
Features and Benefits AGCO Mount With M4 Manifold Dimensions, inches [mm]
• Lowers maintenance costs by
simply removing four transmitter M4A M4T
bolts, disconnecting signal leads
and performing needed transmitter
maintenance.
Rain
• Reduces potential environmental Cap 9.00
contamination and the possibility of 10.25 [229]
[260] Max.
signal-line damage. Max. Open
Open
• Reduces pipe stand corrosion by
using the bracket overhang and plastic
rain hat to cover the pipe stand.
1.50 [38]
• Optional steam heat block permits
5.00
tracing the manifold and transmitter [127]
from a common connection.
5.00
• Shipped ready for assembly and [127]
installation; includes optional heat block
and purge ports (if specified).

• AGCO Mount system is essentially

free if you get credit from the
transmitter company for the mounting
bracket and futbol connectors. 3.00 [76]

3.00 [76]
4.50 [114]
4.50 [114]

AGCO-Tube: MA, M4T and M45A Options

Integral Tube Fitting Design
• Proven design performance. Single Ferrule ‘Bowing’ Design Dual Ferrule ‘Interlocking’ Design
• No tube twist on makeup.
• Low torque in assembly. Front Ferrule
• Male Nut Body
Body
– Silver plated to prevent galling.
– Threads are rolled for additional
strength.
– Gives superior tubing support for
vibration resistance.
• Bubble-tight seal on make and remakes.
Male Nut Male Nut
• Fitting will hold to the burst of the tubing.
• Makeup is industry standard 11/4 turns Ferrule Back Ferrule
from finger tight.
• Remake is 1/2 turn from finger tight
which brings you back to original
position, then snug slightly to respring
the ferrule(s) into a sealing position.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

75
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – AX3A and AX3T

3-Valve Manifolds

AX3T

AX3A

Product Overview Features and Benefits

The AX3 is a three-valve manifold designed • Direct mounting compact design
for direct mounting to standard differential requires a minimum of space for
pressure transmitters. Lightweight and operation and installation with fewer
compact, the manifolds enable instrument potential leak points.
operation, isolation and zeroing in a single
• Installation costs reduced by
unit. Process connections are available
manifolding the valves, thereby
either threaded 1/4- and 1/2-inch NPT or
eliminating several components
flanged to accept standard futbol flanges.
essential for ‘piping-up.’
Suitable for pressures of up to 6000 psig
[414 barg] and temperatures of 1000°F • Free-swiveling ball end stem ensures
[538°C]. AX3 is available metal seated perfect alignment, providing repetitive
with the option of Teflon® or Graphite bubble-tight shutoff and
stem packing. long life.

Applications • Packing below threads Teflon® or

• Direct mounting differential pressure Graphite packing below the stem
transmitters. threads prevents lubricant washout and
thread corrosion.
• Instrument isolation.
• Back seat stem prevents stem blowout
• Instrument zeroing. or accidental removal while in operation.
• Liquid and vapor service. • Manifold mounting, standard pipe
bracket bolts directly to the manifold
providing a rigid support for the
transmitter. Instrument can be easily
removed for service or repair.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

76
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – AX3 Specifications

AX3T Dimensions, inches [mm] – Threaded x Flanged

Equalize Valve
Instrument 5.08 ø 0.47 [12]
[129] Mounting Holes
Max. 4 Places
Open
Equalize Block/Isolate Valve
1.62 [41]
Block/ Block/
Isolate Isolate

Process

0.75 [19]

M8 – 1.25 x 0.47 [12] deep 2.12 [54]

Mounting Holes
2 Places 3.38 [85.73]
8.6 [219] Max. Open

AGCO Mount MB7 AX3A Dimensions, inches [mm] – Flanged x Flanged

The AGCO Mount principle is to mount
the manifold, not the transmitter, enabling Equalize Valve
easier instrument loop installation and lower 5.08 ø 0.47 [12]
on-going maintenance costs. The [129] Mounting Holes
transmitter is simply removed by releasing Max. 4 Places
the four mounting bolts and disconnecting Open
signal leads. AX3 is available with an AGCO Block/Isolate Valve
1.62 [41]
Mount suitable for 2-inch [50 mm] pipe
stand. Supplied in zinc plated CS as
standard. See page 80.

0.75 [19]

5.08 M8 – 1.25 x 0.47 [12] deep 2.12 [54]

[129] 2 Mounting Holes
Max. 2 Places 3.38 [86]
Open
8.62 [219] Max. Open

2.12 [54]
1.25
[31.8] 0.50 [13]
Instrument Side

4.92 1.50
[125.0] [38]

Process Side

(2-inch pipe stand

shown for refernce only)

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

77
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – AX3 Specifications

Valve Bonnet Identification Connections Notes

Dust Cap Coding: The valve bonnet dust Standard Connections 1. Approximate valve weight: 3.7 lb [1.7 kg].
caps are color coded to identify the gland Process Threaded or flanged. The 0.187-inches [4.8 mm] diameter orifice.
packing/stem. standard thread type is Valve Cv 0.52 maximum.
1/2-inch NPT to ANSI/ASME
2. SG (Sour Gas) meets the requirements of
White: Standard bonnet assembly
B1.20.1. NACE MR0175/ISO 15156-3 Corrigendum 2
Teflon® packing. (for Chloride conditions ≤ 50 mg/l [ppm])
Instrument Flanged for direct mounting and NACE MR0103-2005.
Green: Sour Gas service Teflon®
to transmitters on 21/8-inch 3. Metal seats are integral with the body.
packing.
[54 mm] centers.
4. All manifolds are supplied with seal rings
Ring Labels: The valve bonnets have Flanged connections are on
and four 7/16-inch UNF HT steel mounting
color coded ring labels for service 21/8-inch [54 mm] centers. bolts. Teflon® seal rings are supplied with
identification. the standard bonnet; Graphite seal rings are
Other Connections
supplied with high temperature bonnet.
Blue: Isolate Valves Process Threaded BSP Tr to BS21
5. SG3 (Sour Gas) meets the requirements of
and BSP F to BS2779 are
Green: Equalize Valves NACE MR0175/ISO 15156-3 Corrigendum 2
also available. (for Chloride conditions > 50 mg/l [ppm]).

Standard Materials Special Severe Service Materials

Valve1 Body Bonnet Stem Ball Seat3 Duplex UNS S31803

CS A108 A108 303 SS 17-4PH 6MO UNS S31254

SS SS, 316 316 SS 316 SS 316 SS Hastelloy® C276
Monel® Monel® 400 Monel® 400 Monel® 400 Monel® K500 Incoloy® 825
SG2 SS, 316 316 SS Monel® 400 Monel® K500
CS, SS and Monel® valves are suitable for most
SG35 Hastelloy® Hastelloy® Hastelloy® Elgiloy®
process applications, however for severe
service, AX3 valves are also available in the
above exotic materials. For any other material
requirements, please consult the factory.

Pressure vs. Temperature Pressure and Temperature Ratings

Valve Teflon® Bonnet
AX3__VIC/AX3__VIS/AX3__VIM CS, SS
6000 6000 psig @ 200°F [414 barg @ 93°C]
[414] AX3__HIC/AX3__EIC and
4000 psig @ 500°F [276 barg @260°C]
AX3__HIS/AX3__EIS Monel ®

5000 Denotes intersecting data

[345]
Valve High Temperature
4000
Pressure psig

[276]
6000 psig @ 200°F [414 barg @ 93°C]
CS
1500 psig @ 850°F [103 barg @454°C]
3000
[207] 6000 psig @ 200°F [414 barg @ 93°C]
SS
2000 1500 psig @1000°F [103 barg @538°C]
[138]
1500
[103]
1000
[69]

0 100 200 300 400 500 600 700 800 900 1000
[-18] [38] [93] [149] [204] [260] [316] [371] [427] [482] [538]
850
Temperature °F [454]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

78
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – AX3 Specifications

Futbol Flanges Ordering Information

Futbol Flanges are available for bolting to AX3T V I S –4 – SG
the process side of a flanged manifold.
This provides the ideal solution to welded
connection requirements, allowing the Valve Type
flanges to be welded to process piping
while keeping the flexibility to remove the AX3T – Threaded x Flanged
manifold when required, for maintenance AX3A – Flanged x Flanged
or repair.
Bonnet Packing
Connection CS SS V – Teflon®
1/2" NPT FNPT KFC-4 KFS-4 H – Graphite
1/2" NPT MNPT KFC-4M KFS-4M
1/2" Buttweld KFC-4BW KFS-4BW Seat
1/2" Socket Weld KFC-4B KFS-4B I – Integral

Body Material
C – CS1
S – SS, 316
M – Monel® 400
J – Hastelloy®

Process Connections (AX3T only)

2 – 1/4-inch FNPT
4 – 1/2-inch FNPT

Options
AL – Arctic Lubricant (low temperature service -70°F) - not available for CS valves
AT – Tamper-proof Bonnet
BL – Bonnet Lock Device (Accessories, page 154)
K – Key for -AT
LAT – Lockable Tamper-proof Bonnet
MB7 – AGCO Mount Kit for 2-inch pipe stand mounting (page 80)
OC – Cleaned for oxygen service
PD – Padlock for -LAT
R3V – Add for use with Rosemount® Model 3051C (SS 18-8 Bolts)
SSA2 – SS Flange Bolt (grade 18-8) - maximum pressure rating 4500 psi [310 barg]
SSB – 316 SS Flange Bolt (B8M Class 2) - will provide full pressure rating
SSC2 – 316 Flange Bolt (B8M) - maximum pressure rating 4500 psi [310 barg]
SG – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and NACE MR0103-2005 (SS valves only)
SG3 – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm])
ST – Stellite Ball Ended Stem
SP – Special Requirements - please specify

Notes
1. Zinc plated to prevent corrosion.
2. 316 SS bolts lower pressure ratings to a
maximum of 4500 psi [310 barg]. Consult
factory for full rating with 316 SS bolts.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

79
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – AGCO Mount Kits

AGCO Mount Kits for Differential Pressure Manifolds – 3-Valve Notes

Manifold Kit Material Description 1. Vertical 2-way brackets are available.
Style Part Number 2. Zinc cobalt plated.

02.1639.501–AM Standard Kit 3. Zinc plated.

M4T1 02.1639.508–AM CS2 For bottom purge
02.1639.500–AM With steam block

02.1639.505–AMS Standard Kit

M4T1 02.1639.509–AMS SS For bottom purge
02.1639.871–AMS With steam block
02.1639.541–AM Standard Kit
02.1639.543–AM 2
With SS bolting
M4A1 (hard seat) CS
02.1639.540–AM With steam block
02.1639.544–AM With steam block and SS bolting

M4A1 (hard seat) 02.1639.545–AMS SS Standard Kit

02.1639.546–AM Standard Kit

M4A1 (soft seat) CS2
02.1639.547–AM With steam block
M45A1 06.1375.003–AM CS2 Standard Kit

M45A1 06.1375.004–AMS SS SS components

MM4A 06.0954.001–AM CS2 Standard Kit

MM4A 06.0954.002–AMS SS Standard Kit

AX3A MB7 CS3 Standard Kit

AX3A MB7S SS Standard Kit

AX3T MB7 CS3 Standard Kit

AX3T MB7S SS Standard Kit

AGCO Mount Kits for Differential Pressure Manifolds – 5-Valve

Manifold Kit Material Description
Style Part Number
MB8 CS3 Standard Kit
A22N
MB8S SS Standard Kit
MB6 CS3 Standard Kit
A26T
MB6S SS Standard Kit
MB55 CS3 Standard Kit
M24A
MB55S SS Standard Kit
MB55 CS3 Standard Kit
M24T
MB55S SS Standard Kit

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

80
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M20 Meter Manifold

Product Overview
The M20 Manifold is a rotary-positioned
differential pressure transmitter manifold. It
uses a dual-rotary element with passages
cut to perform the functions of a double-
block-bleed manifold, with single handle
actuation.

The M20 ensures correct valve sequencing

every time the manifold is manipulated from
RUN-to-ZERO-to-OFF, or from OFF-to-
ZERO-to-RUN.

Manual
In its manual configuration, the M20 is
virtually foolproof. An operator cannot
mistakenly over-range the transmitter on
the wrong side, leave the equalizer valve
open, or forget to open the manifold block
valve after zeroing.

The M20 is uniquely suited for applications Features and Benefits • Correct valve sequence is fixed.
having serious space limitations, such as • This unique manifold has may Transmitter is properly pressurized when
winterizing enclosures, offshore oil desirable features not found in commissioned. Zeroing from RUN or
production platforms, and power plant rack conventional manifolds. It is particularly OFF is done correctly every time. Port
designs. For hazardous process fluids useful in chemical process. sequencing always admits high side
demanding special handling and caution, a pressure to transmitter first, preventing
dual locking and venting feature assures • Instrument enclosures utilize the possible zero shift from reverse over-
personnel safety. single handle to externally zero the ranging.
transmitter without opening the
enclosure. • Safe venting of both manifold and
instrument cavities to a safe disposal
• Handle is lockable. It may be retained- point in the OFF position, reducing
screw locked in any position or chances of injury during the
padlocked in OFF position, promoting maintenance procedure. When process
personnel safety. fluid is toxic, carcinogenic, or otherwise
• Manifold mounts directly onto pipe dangerous, cavities can be flushed at
stand. The AGCO Mount supports the transmitter backside taps before
transmitter and allows loop installation removing the transmitter.
to be completed without the transmitter. • Seal fluids cannot be lost when
Instrument removal for service or repair manipulating the M20 to ZERO, RUN or
does not disturb installation. OFF – big savings in down time and seal
• Double block-bleed valving allows fluids.
on-stream checking of seat tightness.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

81
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M20 Specifications

Dimensions, inches [mm]

Optional Purge Ports (2)

LO Instrument Face

5.00
PROCESS

INSTR

[127]
HI

3.89 Ref. ø 0.28 [7.1] Mounting Holes

[98.8] 2 Places

Stop Screw
Off Position
Padlock Hole
Zero Position

F ZE R
OF O
R 2.75
[69.8]
U 2.40
[61.0]
N

Screw Lock Hole (3)

Zero Detent Slot
Screw Lock
Detent Screw

Standard Materials Notes

Body and Rotary Elements Internals Seat Soft Goods1 1. Other elastomers available. Consult factory.
2. Approximate valve weight: 5.9 lb [2.7 kg].
A351 CF8M/A479-316 316 SS PEEK Viton®
A351 CF8M/A479-316 316 SS Teflon® Viton®

Pressure and Temperature Ratings

Body and Rotary Seat Ratings
Elements
A351 3000 psig @ 100°F [207 barg @ 38°C]
PEEK
CF8M/A479-316 225 psig @ 400°F [16 barg @ 204°C]
A351 800 psig @ 200°F [55 barg @ 93°C]
Teflon®
CF8M/A479-316 225 psig @ 400°F [16 barg @ 204°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

82
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M20 Specifications

Pressure vs. Temperature

3000 M20__VS
[207] M20__ES
Denotes
2500 intersecting

Pressure psig [barg]

[172] data

2000
[138]

1500
[103]
1000
[69]
800
[55]
500
[34]
225
[16]
0
0 100 200 300 400 500
[-18] [38] [93] [149] [204] [260]

Temperature °F [°C]

Operation Sequence
Field Calibration (must have M20 with -FC option):

a. Manifold in ‘OFF’ position.

b. Vent low side of instrument (use vent on low side of transmitter).

c. Apply calibration pressure through Field Test Valve.

Run Position Zero Position Off Position2 Off Position 1

Inlet Inlet Inlet Inlet

H L H H H
L L L
I O I I I
O O O
G W G G G
W W W
H M M H M M H M M H M

Instrument Instrument Instrument Vent

Instrument

Notes
1. Field calibration option (allows transmitter to
be calibrated in the field).
2. Also zero can vent to atmosphere to remove
transmitter.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

83
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M20 Specifications

Ordering Information Notes

M20 T E S – H1 – FC 1. For other materials of construction, consult
factory.
2. 316 SS bolts lower pressure ratings to a
Connection Style
maximum of 4500 psi [310 barg]. Consult
T – 1/2-inch NPT Taps x Flange factory for full rating with 316 SS bolts.
A – Flange x Flange

Seat
E – PEEK
V – Teflon®

Body1
S – 316 SS

Optional Drain Valve

H1 – H1RDS-22
H5 – H5VIS-22

Other Options
AL – Arctic Lubricant (low temperature service -70°F) - not available for CS valves
AM – AGCO Mount Kit for 2-inch pipe stand mounting of manifold (page 80)
CL – Cleaned for chlorine service
FC – Field Calibration Spindle
HD – Hydrostatic testing (100 percent) (MSS SP-61)
OC – Cleaned for oxygen service
R3V – Add for use with Rosemount® Model 3051C (SS 18-8 Bolts)
SSA2 – SS Flange Bolt (grade 18-8) - maximum pressure rating 4500 psi [310 barg]
SSB – 316 SS Flange Bolt (B8M Class 2) - will provide full pressure rating
SSC2 – 316 Flange Bolt (B8M) - maximum pressure rating 4500 psi [310 barg]
SG – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and NACE MR0103-2005 (SS valves only)
(not available for O-ring packed valves)
SG3 – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm])
SP – Special Requirements - please specify

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

84
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M24 5-Valve

Product Overview Features and Benefits

The M24 is a five-valve manifold designed • Direct mounting compact design
for direct mounting to differential pressure requires a minimum of space for
transmitters. Lightweight and with compact operation and installation with fewer
dimensions, M24 manifolds enable potential leak points.
instrument operation, isolation, zeroing and
• Installation costs reduced by
venting in a single unit.
manifolding the valves, thereby
Manufactured from a precision casting with eliminating several components
two block valves, an equalize valve and two essential for ‘piping-up.’
instrument vent/calibrate valves, the M24 is
• Ball end stem free-swiveling ball-end
coupled directly to differential pressure
stem ensures perfect alignment,
transmitters via standard instrument
providing repetitive bubble-tight shut-off
flanged connections on 21/8-inch [54 mm]
and long life.
centers. (Non-standard instrument centers
are also available). Process connections are • Packing below threads Teflon® or
available threaded or flanged to accept GRAFOIL® packing below the stem
standard futbol flanges. Vent connections threads prevents lubricant washout and
are threaded 1/4-inch on all manifolds and thread corrosion.
provided with vent plugs as standard.
Suitable for pressures of up to 6000 psig • Back seat stem prevents stem
[414 barg] and temperatures of up to blowout or accidental removal while in
1000°F [538°C]. M24 is available with a metal operation.
seat and the option of Teflon® or GRAFOIL® • Threaded vent ports allow vent to be
stem packing. safely piped away, supplied plugged as
Applications standard.

• Direct-mounting differential pressure • Manifold mounting, standard pipe

transmitters. bracket bolts directly to the manifold
providing a rigid support for the
• Instrument isolation and zeroing. transmitter. Instrument can be easily
• Instrument venting to close system. removed for service or repair.

• Instrument calibration.

• Liquid and vapor service.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

85
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M24 Specifications

M24A Dimensions, inches [mm] – Flanged x Flanged

Equalize Valve

ø 0.47 [12]
Mounting Holes
B 4 Places
0.44 -20 UNF x 0.55 [14] deep
Max. Mounting Holes
Open Flanged Process Connections
4 Places

Block/Isolate Block/Isolate Valve

Valve

1.63
[41.28]
C
Max. Instrument Side
Open

1.04
[26.4]
Vent 2.12 Vent
Valve [54] Valve
A Max. Open
1/4- 18 NPT Vent Ports
(supplied plugged)

M24T Dimensions, inches [mm] – Threaded x Flanged

Equalize Valve

ø 0.47 [12]
Mounting Holes
4 Places - 14 NPT
1/2
B M8 -1.25 x 0.75 [19] deep Process Connections
Max. (on process face)
Open Mounting Holes
4 Places
Block/Isolate Valve
Block/Isolate
Valve

1.63
[41.3]
C
Max. Instrument Side
Open
1.04
[26.36]
Vent 2.12 Vent
Valve [54] Valve
A Max. Open
1/4- 18 NPT Vent Ports
(supplied plugged)

Maximum Dimensions, inches [mm] Instrument

Valve A B C
Teflon® Packing 8.65[220] 4.35[110] 8.65 [220] Vent/Test Vent/Test
GRAFOIL® Packing 9.75[248] 4.80[122] 9.60 [244] Equalize

Block/Isolate Block/Isolate

Process

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

86
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M24 Specifications

Standard Materials
Valve1 Body Bonnet Stem Ball Seat
SS A351 CF8M 316 SS 316 SS 316 SS
Monel® Monel® 400 Monel® 400 Monel® 400 Monel® K500
SG2 A351 CF8M 316 SS Monel® 400 Monel® K500

Special Severe Service Materials

Notes
Duplex UNS S31803
1. Approximate valve weight: 6.0 lb [2.7 kg].
0.187-inch [4.8 mm] diameter orifice. 6MO UNS S31254
Valve Cv 0.52 maximum. Hastelloy® C276
2. SG (Sour Gas) meets the requirements of
Incoloy® 825
NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and
For any other material requirements, please
NACE MR0103-2005.
consult the factory.

AGCO Mount Dimensions, inches [mm]

5.12 [130]
AGCO Mount MB55
Max. Open The AGCO Mount principle is to mount the
manifold not the transmitter enabling easier
instrument loop installations and lower on-
4.33 going maintenance costs. The transmitter is
[110] simply removed by releasing the four
Max.
Open mounting bolts and disconnecting signal
leads. M24 utilizes a MB55 AGCO Mount,
suitable for 2-inch [50 mm] NB pipe stand.
Supplied in zinc plated CS as standard.

1.62
[41.28]

5.31 [135.0]

(2-inch pipe stand

shown for refernce only)

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

87
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M24 Specifications

Valve Bonnet Identification Connections1 Futbol Flanges

Dust Cap Coding: The valve bonnet dust Standard Connections Futbol Flanges are available for bolting to
caps are color coded to identify the gland Process Threaded 1/2-inch NPT to the process side of a flanged manifold.
packing/stem. ANSI/ASME B1.20.1 on This provides the ideal solution to welded
21/8-inch [54 mm] centers. connection requirements, allowing the
White: Standard bonnet assembly
flanges to be welded to process piping
Teflon® packing. Instrument Flanged for direct mounting to
while keeping the flexibility to remove the
transmitters on 21/8-inch [54
Green: Sour Gas service Teflon® manifold when required, for maintenance
mm] centers.
packing. or repair.
Flanged connections are on
Ring Labels: The valve bonnets have 21/8-inch [54 mm] centers.
color coded ring labels for service Connection CS SS
Vent Threaded 1/4-inch NPT to
identification.
ANSI/ASME B1.20.1. 1/2" FNPT KFC-4 KFS-4
Red: Vent Valves 1/2" MNPT KFC-4M KFS-4M
Other Connections
Blue: Isolate Valves Threaded BSP Tr to BS21 1/2" Buttweld KFC-4BW KFS-4BW
BSP F to BS2779
Green: Equalize Valves 1/2" Socket Weld KFC-4B KFS-4B
Please consult the factory for availability.

Notes
1. Threaded connection: vent supplied with
blanking plug as standard.
2. All manifolds are supplied with seal rings and
four 7/16-inch UNF HT steel mounting bolts.
Teflon® seal rings are supplied with the
standard bonnet; Graphite seal rings are
supplied with high temperature bonnet.

Pressure and Temperature Ratings Pressure vs. Temperature

Valve Teflon® Bonnet
CS, SS
6000 psig @ 200°F [414 barg @ 93°C] M24__HIS/M24__EIS
and
4000 psig @ 500°F [276 barg @260°C] 6000 M24__HIC/M24__EIC
Monel®
[414] M24__VIC
M24__VIS
5000 M24__VIM
Valve High Temperature [345]
Denotes
intersecting data
Pressure psig [barg]

6000 psig @ 200°F [414 barg @ 93°C] 4000

CS [276]
1500 psig @ 850°F [103 barg @454°C]
6000 psig @ 200°F [414 barg @ 93°C] 3000
SS [207]
1500 psig @1000°F [103 barg @538°C]
2000
[138]
1500
[103]
1000
[69]

0 100 200 300 400 500 600 700 800 900 1000
[-18] [38] [93] [149] [204] [260] [316] [371] [427] [482] [538]
850
Temperature °F [°C] [454]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

88
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M24 Specifications

Note Ordering Information

1. 316 SS bolts lower pressure ratings to a M24T V I S –4 – SG
maximum of 4500 psi [310 barg]. Consult
factory for full rating with 316 SS bolts.
Valve Type
M24A (Flanged x Flanged)
M24T (Threaded x Flanged)

Bonnet Packing
V – Teflon®
H – GRAFOIL®
E – Low Emissions Graphite

Seat
I – Integral (body material)

Body Material
S – SS

Process Connections (M24T only)

4 – 1/2-inch FNPT

Options
AL – Arctic Lubricant (low temperature service -70°F) - not available for CS valves
AT – Tamper-proof Bonnet
BL – Bonnet Lock Device (Accessories, page 154)
CB – Ceramic Ball Ended Stem
K – Key for -AT
LAT – Lockable Tamper-proof Bonnet
MB55 – AGCO Mount Kit (page 80)
OC – Cleaned for oxygen service
PD – Padlock for -LAT
R3V – Add for use with Rosemount® Model 3051C (SS 18-8 Bolts)
SSA1 – SS Flange Bolt (grade 18-8) - maximum pressure rating 4500 psi [310 barg]
SSB – 316 SS Flange Bolt (B8M Class 2) - will provide full pressure rating
SSC1 – 316 Flange Bolt (B8M) - maximum pressure rating 4500 psi [310 barg]
SG – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and NACE MR0103-2005 (SS valves only)
ST – Stellite Ball Ended Stem
SP – Special Requirements - please specify

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

89
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – M24 ASME B31.1 or

B31.3 Specifications
Ordering Information – Power Industry Applications1

M24THP S –4 –XP – SSB

Valve Type
M24AHP
M24THP

Body Material
S – SS

Connections4 (Process x Instrument x Vent)

4 – 1/2-inch FNPT x Flange x 1/4-inch FNPT
4AT – 1/2-inch AGCO Tube x Flange x 1/4-inch FNPT

Options
MB55 – AGCO Mount Kit (page 80)
SSA5 – SS Flange Bolt (grade 18-8) - maximum pressure rating 4500 psi [310 barg]
SSB – 316 SS Flange Bolt (B8M Class 2) - will provide full pressure rating
SSC5 – 316 Flange Bolt (B8M) - maximum pressure rating 4500 psi [310 barg]
SP – Special Requirements - please specify

Notes
1. All Manifolds come standard with GRAFOIL®
packing, integral seats, bonnet locks, and
are subjected to hydrostatic testing.
2. Manifold ratings:
SST
6000 psig @ 100°F [414 barg @ 38°C]
3030 psig @ 1000°F [209 barg @ 538°C]
3. See page 156 for Code Requirements.
4. M24A connections are Flange x Flange x
1/4-inch FNPT.

5. 316 SS bolts lower pressure ratings to a

maximum of 4500 psi [310 barg]. Consult
factory for full rating with 316 SS bolts.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

90
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – A26 5-Valve

Product Overview Features and Benefits

The A26 is a five-valve manifold designed • Direct mounting compact design
for mounting to differential pressure requires a minimum of space for
transmitters. Lightweight and with compact operation and installation with fewer
dimensions, A26 manifolds enable potential leak points.
instrument operation, isolation, zeroing and
• Installation costs reduced by
venting in a single unit.
manifolding the valves, thereby
The A26 is coupled directly to differential eliminating several components
pressure transmitters via standard essential for ‘piping-up.’
instrument side flanged connections
• Ball end stem free-swiveling ball-end
on 21/8-inch [54 mm] centers. Process
stem ensures perfect alignment,
connections are available threaded 1/4-inch
providing repetitive bubble-tight shut-off
and 1/2-inch NPT. Vent connections are
and long life.
threaded 1/4-inch NPT on all manifolds and
provided with vent plugs as standard. • Packing below threads Teflon® or
Suitable for pressures of up to 6000 psig Graphite packing below the stem
[414 barg] and temperatures of up to threads prevents lubricant washout and
1000°F [538°C], A26 is available with a thread corrosion.
metal seat and the option of Teflon® or
Graphite stem packing. • Back seat stem prevents stem
blowout or accidental removal while in
Applications operation.
• Direct-mounting differential pressure • Threaded vent ports allow vent to be
transmitters. safely piped away, supplied plugged as
• Instrument isolation and zeroing. standard.

• Instrument venting to close system. • Manifold mounting, standard pipe

bracket bolts directly to the manifold
• Instrument calibration. providing a rigid support for the
transmitter. Instrument can be easily
• Liquid and vapor service.
removed for service or repair.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

91
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – A26 Specifications

Dimensions, inches [mm]

5.4
[137] Equalize
Max. Valve
Block/Isolate Block/Isolate
Open Valve Valve

1.5 [38.1]

Vent Vent
3.0 Valve
[76.2] Valve

2.12 [54]
1/4 - 18 NPT Vent Ports
2 Places 4.0 [101.6]
1.25 [31.75] (supplied plugged)
5.5 [139.7]
Process Ports
Instrument Port Direct Mounting 6.2 [158]
11.5 [292] Max. Open

Standard Materials AGCO Mount MB6

Valve1 Body Bonnet Stem Ball Seat A26 is available with a mounting bracket
suitable for 2-inch pipe stand. Supplied zinc
CS2 A108 A108 303 SS 17-4PH plated CS as standard, page 80.
SS SS, A479 316 316 SS 316 SS 316 SS
Monel® Monel® 400 Monel® 400 Monel® 400 Monel® K500
SG3 A479 316 SS 316 SS Monel® 400 Monel® K500
SG36 Hastelloy® C-276 Hastelloy® C-276 Hastelloy® C-276 Elgiloy®

1/2 -14 NPT

Notes Special Severe Service Materials Threaded
Process
1. Approximate valve weight: 6.0 lb [2.7 kg]. Duplex UNS S31803 Connection
0.187-inch [4.8 mm] diameter orifice. 6MO UNS S31254
Valve Cv 0.52 maximum.
Hastelloy® C276 1.5
2. For CS valves, non-wetted parts are all CS [38]
zinc plated to resist corrosion. Incoloy® 825
3. SG (Sour Gas) meets the requirements of
For any other material requirements, please
NACE MR0175/ISO 15156-3 Corrigendum 2
consult the factory.
(for Chloride conditions ≤ 50 mg/l [ppm]) and 4.9
NACE MR0103-2005. [125]
Instrument
4. Hastelloy® is a registered trademark of
Haynes International.
5. All manifolds are supplied with seal rings and
four 7/16-inch UNF HT steel mounting bolts. Vent/Test Vent/Test
Teflon® seal rings are supplied with the 2.4
Equalize [60]
standard bonnet; Graphite seal rings are
supplied with high temperature bonnet.
Block/Isolate Block/Isolat
6. SG3 (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm]).
Process
1.8
[45]
Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344
92
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – A26 Specifications

Valve Bonnet Identification Connections1

Dust Cap Coding: The valve bonnet dust Standard Connections
caps are color coded to identify the gland Process Threaded 1/2-inch NPT to
packing/stem. ANSI/ASME B1.20.1.

White: Standard bonnet assembly Instrument Flanged for direct mounting to

Teflon® packing. transmitters on 21/8-inch [54
mm] centers.
Green: Sour Gas service Teflon®
packing. Vent Threaded 1/4-inch NPT to
ANSI/ASME B1.20.1.
Ring Labels: The valve bonnets have
color coded ring labels for service Other Connections
identification. Threaded BSP Tr to BS21
BSP F to BS2779
Red: Vent Valves
Please consult the factory for availability.
Blue: Isolate Valves

Green: Equalize Valves

Note
1. Threaded connection: vent supplied with
blanking plug as standard.

Pressure and Temperature Ratings A26 Pressure vs. Temperature

Valve Teflon® Bonnet
CS, SS
6000 psig @ 200°F [414 barg @ 93°C]
and A26HIS/A26EIS
4000 psig @ 500°F [276 barg @260°C] 6000
Monel ®
A26HIC/A26EIC
[414]
A26VIC
5000
A26VIS
Valve High Temperature [345] A26VIM
Denotes
Pressure psig [barg]

6000 psig @ 200°F [414 barg @ 93°C] 4000 intersecting

CS [276] data
1500 psig @ 850°F [103 barg @454°C]
6000 psig @ 200°F [414 barg @ 93°C] 3000
SS
1500 psig @1000°F [103 barg @538°C] [207]

2000
[138]
1500
[103]
1000
[69]

0 100 200 300 400 500 600 700 800 900 1000
[-18] [38] [93] [149] [204] [260] [316] [371] [427] [482] [538]
850
Temperature °F [°C] [454]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

93
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – A26 Specifications

Ordering Information

A26T V I S –4 – SG

Bonnet Packing
V – Teflon®
H – Graphite

Seat
I – Integral

Body Material
C – CS
S – SS
M – Monel®

Process Connections
4 – 1/2-inch FNPT

Options
AL – Arctic Lubricant (low temperature service -70°F) - not available for CS valves
AT – Tamper-proof Bonnet
BL – Bonnet Lock Device (Accessories, page 154)
CB – Ceramic Ball Ended Stem
K – Key for -AT
LAT – Lockable Tamper-proof Bonnet
MB6 – AGCO Mount Kit (page 80)
OC – Cleaned for oxygen service
PD – Padlock for -LAT
R3V – Add for use with Rosemount® Model 3051C (SS 18-8 Bolts)
SSB – 316 SS Flange Bolt (B8M Class 2) - will provide full pressure rating
SSC1 – 316 Flange Bolt (B8M) - maximum pressure rating 4500 psi [310 barg]
SG – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and NACE MR0103-2005 (SS valves only)
SG3 – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm])
ST – Stellite Ball Ended Stem
SP – Special Requirements - please specify

Note
1. 316 SS bolts lower pressure ratings to a
maximum of 4500 psi [310 barg]. Consult
factory for full rating with 316 SS bolts.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

94
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – MDP 5-Valve

Product Overview
The MDP is a five valve manifold designed
for direct mounting to differential pressure
transmitters. Lightweight and with compact
dimensions, MDP manifolds enable
instrument operation, isolation, zeroing and
venting in a single unit.

Manufactured with two block valves,

an equalize valve and two instrument
vent/calibrate valves, the MDP is coupled
directly to differential pressure transmitters
via standard instrument flanged
connections on 21/8-inch [54 mm] centers.
(Non-standard instrument centers are also
available). Process connections are
available threaded or flanged to accept
standard futbol flanges. Vent connections
are threaded 1/4-inch on all manifolds and
provided with vent plugs as standard.
Suitable for pressures of up to 6000 psig
[414 barg] and temperatures of up to
1000°F [538°C]. MDP is available with a
metal seat and the option of Teflon® or
GRAFOIL® stem packing.

Applications
• Direct-mounting differential pressure Features and Benefits • Back seat stem prevents stem
transmitters. blow-out or accidental removal while
• Direct mounting compact design
• Instrument isolation and zeroing. requires a minimum of space for in operation.
operation and installation with fewer
• Instrument venting to close system. • Threaded vent ports allow vent to be
potential leak points.
safely piped away, supplied plugged as
• Instrument calibration. • Installation costs reduced by standard.
• Liquid and vapor service. manifolding the valves, thereby
• Manifold mounting, standard pipe
eliminating several components
bracket bolts directly to the manifold
essential for ‘piping-up.’
providing a rigid support for the
• Ball end stem free-swiveling ball-end transmitter. Instrument can be easily
stem ensures perfect alignment, removed for service or repair.
providing repetitive bubble-tight
shut-off and long life.

• Packing below threads Teflon® or

GRAFOIL® packing below the stem
threads prevents lubricant washout and
thread corrosion.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

95
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – MDP Specifications

MDP Dimensions, inches [mm] MDPT

B Max.Open

2.50 2.50
[63.5] [63.5]

5.25 [133.4] 1.75

[44.5]
A Max. Open C Max.
Open
1/2 - 14 NPT Instrument Connections

2 Places

1.71
[43.4] 2.00
[50.8]

0.375 – 16 UNC x 0.58 [14.7]

Deep Mounting Holes
2.126 [54.0]
2 Places
1/2 - 14 NPT 3.35 [85.1]
Process Connection
2 Places 4.13 [104.9]

MDP Dimensions, inches [mm] MDPT Dimensions, inches [mm] Special Severe Service Materials
Valve A B Valve A B C Duplex UNS S31803
6MO UNS S31254
10.45 5.10 10.45 4.90 2.11
Teflon® Packed Teflon® Packed Hastelloy® C276
[265.4] [129.5] [265.4] [124.5] [53.6]
GRAFOIL®/ GRAFOIL®/ Incoloy® 825
11.75 5.75 11.75 5.51 2.34
Low Emissions Low Emissions
[298.5] [146.1] [298.5] [140.0] [59.4] For any other material requirements, please
Graphite Packed Graphite Packed consult the factory.

Standard Materials Instrument

Valve1 Body Bonnet Stem Ball Seat
SS SS, A479 316 316 SS 316 SS 316 SS
Monel® Monel® 400 Monel® 400 Monel® 400 Monel® K500 Vent/Test Vent/Test
SG2 A479 316 SS 316 SS Monel® 400 Monel® K500 Equalize

Notes Block/Isolate Block/Isolate

1. Approximate valve weight: 6.7 lb [3.0 kg]. 2. SG (Sour Gas) meets the requirements of
0.156-inch [4.0 mm] diameter orifice. NACE MR0175/ISO 15156-3 Corrigendum 2
Valve Cv 0.364 maximum. (for Chloride conditions ≤ 50 mg/l [ppm]) and Process
NACE MR0103-2005.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

96
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – MDP Specifications

Valve Bonnet Identification Connections

Dust Cap Coding: The valve bonnet dust Standard Connections
caps are color coded to identify the gland Process Threaded 1/2-inch NPT to
packing/stem. ANSI/ASME B1.20.1.

White: Standard bonnet assembly Instrument Flanged for direct mounting to

Teflon® packing. transmitters on 21/8-inch [54
mm] centers.
Green: Sour Gas service Teflon®
Flanged connections are on
packing.
21/8-inch [54 mm] centers.

Vent Threaded 1/4-inch NPT to

ANSI/ASME B1.20.1.

Notes
1. Threaded connection: vent supplied with
blanking plug as standard.
2. All manifolds are supplied with seal rings and
four 7/16-inch UNF HT steel mounting bolts.
Teflon® seal rings are supplied with the stan-
dard bonnet; Graphite seal rings are supplied
with high temperature bonnet.

Pressure and Temperature Ratings MDP Pressure vs. Temperature

Valve Teflon® Bonnet
CS, SS DPM__HIS
6000 psig @ 200°F [414 barg @ 93°C]
and DPM__VIC
4000 psig @ 500°F [276 barg @260°C] 6000
Monel ®
[414] DPM__VIS
DPM__VIM
5000 Denotes
Pressure psig [barg]

[345] intersecting data

Valve High Temperature
4000
6000 psig @ 200°F [414 barg @ 93°C] [276]
SS
1500 psig @1000°F [103 barg @538°C]
3000
[207]

2000
[138]
1500
[103]
1000
[69]

0 100 200 300 400 500 600 700 800 900 1000
[-18] [38] [93] [149] [204] [260] [316] [371] [427] [482] [538]
850
Temperature °F [°C] [454]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

97
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – MDP Specifications

Ordering Information

MDP or MDPT V I S –4 – SG

Bonnet Packing
V – Teflon®
H – Graphite

Seat
I – Integral

Body Material
C – CS
S – SS
M – Monel®

Process Connections
4 – 1/2-inch FNPT

Options
AL – Arctic Lubricant (low temperature service -70°F) - not available for CS valves
AM – AGCO Mount Kit for 2-inch pipe stand mounting of manifold (page 80)
AT – Tamper-proof Bonnet
BL – Bonnet Lock Device (Accessories, page 154)
CB – Ceramic Ball Ended Stem
K – Key for -AT
(2) LAT Lockable Tamper-proof Bonnet (Block Valves only)
(3) LAT Lockable Tamper-proof Bonnet (Block Valves and Vent Valves only)
(5) LAT Lockable Tamper-proof Bonnet (All Valves)
OC – Cleaned for oxygen service
R3V – Add for use with Rosemount® Model 3051C (SS 18-8 Bolts)
SSB – 316 SS Flange Bolt (B8M Class 2) - will provide full pressure rating
SSC1 – 316 Flange Bolt (B8M) - maximum pressure rating 4500 psi [310 barg]
SG – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and NACE MR0103-2005 (SS valves only)
SG3 – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm])
ST – Stellite Ball Ended Stem
SP – Special Requirements - please specify

Note
1. 316 SS bolts lower pressure ratings to a
maximum of 4500 psi [310 barg]. Consult
factory for full rating with 316 SS bolts.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

98
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – DPM 5-Valve

ASME B31.1 or B31.3 Meets MSS SP-105

Product Overview Features and Benefits

The DPM is a five-valve manifold designed • Direct mounting compact design
for remote mounting to differential pressure requires a minimum of space for
transmitters. Lightweight and with compact operation and installation with fewer
dimensions, DPM manifolds enable potential leak points.
instrument operation, isolation, zeroing and
• Installation costs reduced by
venting in a single unit. Two block valves,
manifolding the valves, thereby
one equalizer valve and two vent/test valves
eliminating several components
are combined into a compact unit designed
essential for ‘piping-up.’
for rack or pipe-stand mounting. Two
1/4-inch FNPT vent/test ports are provided
• Ball end stem free-swiveling ball-end
for ease of venting and field calibration of stem ensures perfect alignment,
the instrument. providing repetitive bubble-tight shut-off
and long life.

• Packing below threads Teflon® or

GRAFOIL® packing below the stem
threads prevents lubricant washout and
thread corrosion.

• Back seat stem prevents stem

blowout or accidental removal while in
operation.

• Threaded vent ports allow vent to be

safely piped away, supplied plugged as
standard.

• Manifold mounting, standard pipe

bracket bolts directly to the manifold
providing a rigid support for the
transmitter. Instrument can be easily
removed for service or repair.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

99
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – DPM 5-Valve

ASME B31.1 or B31.3
Dimensions, inches [mm]
2.75
[69.9]

6.57
[166.9] Vent/Test Valve
Max.
Open ø 0.281 - 0.290 1/4 - 18 NPT
Mounting Holes
Test Port
2 Places 1.38
[35.1] 2 Places
Equalize Valve

Block/Isolate Outlet Port

3.25 [82.6] 2 Places
Valve

2.44
[62.0]
1.87
[47.5]

A 1.50
Process [38.1]
4.00 [101.6] Connection 4.82 [122.4]
2 Places Max. Open
10.50 [266.1] Max. Open

Dimensions, inches [mm] Instrument

Process Connections A
1/2-inch NPT 1.75 [44.4]
Vent/Test Vent/Test
3/8-inch NPT
1/2-inch
1.90 [48.3] Equalize
AGCO Tube
1/2-inch Pipe S.W.
Block/Isolate Block/Isolat
3/8-inch Tube S.W.
1/2-inch Tube S.W. 2.12 [53.8]
3/8-inch Tube Stub
1/2-inch Tube Stub
Process

Standard Materials Note

Valve1 Body Bonnet Stem Ball Seat Packing 1. Approximate valve weight: 6.5 lb [2.9 kg].
0.187-inch [4.8 mm] diameter orifice.
SS A479-316 A479-316 A276-316 316 GRAFOIL® Valve Cv 0.52 maximum.

Pressure and Temperature Ratings

Valve Ratings
6000 psig @ 100°F [414 barg @ 38°C]
SS
3030 psig @ 1000°F [209 barg @ 538°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

100
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – DPM ASME B31.1 or

B31.3 Meets MSS SP-1055
Ordering Information – Power Industry Applications4

DPMHP S -4-2 – XP – SP

Valve Type
DPMHP

Body Material
S – SS, A479-316

Connections (Process x Instrument x Vent)

3-2 – 3/8-inch FNPT x 1/4-inch FNPT x 1/4-inch FNPT
4-2 – 1/2-inch FNPT x 1/4-inch FNPT x 1/4-inch FNPT
4B2 – 1/2-inch Pipe S.W. x 1/4-inch FNPT x 1/4-inch FNPT
4TB2 – 1/2-inch Tube S.W. x 1/4-inch FNPT x 1/4-inch FNPT3
3TC2 – 3/8-inch Tube Stub x 1/4-inch FNPT x 1/4-inch FNPT1
4TC2 – 1/2-inch Tube Stub x 1/4-inch FNPT x 1/4-inch FNPT2
4AT2 – 1/2-inch AGCO Tube x 1/4-inch FNPT x 1/4-inch FNPT
3TB2 – 3/8-inch Tube S.W. x 1/4-inch FNPT x 1/4-inch FNPT

Options
SP – Special Requirements - please specify

Notes
1. AT = Single ferrule SS fitting for 1/2-inch tubing.
ATD = Double ferrule SS fitting for 1/2-inch tubing.
2. Tube Stubs are 6-inch long x 0.065-inch wall.
3. Tube Stubs are 6-inch long x 0.095-inch wall.
4. All Manifolds come standard with GRAFOIL® packing,
integral seats, bonnet locks, and are subjected to
hydrostatic testing.
5. See page 156 for Code Requirements.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

101
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – MM5 5-Valve

Product Overview Features and Benefits

The MM5 is a five-valve miniature manifold • Remote mounting compact design
designed for instrument installations where requires a minimum of space for
space is restricted. Lightweight and with operation and installation with fewer
compact dimensions, MM5 manifolds are potential leak points.
designed for flow metering and differential
• Installation costs reduced by
pressure transmitters to enable instrument
manifolding the valves. This eliminates
operation, isolation, zeroing and venting in a
several parts used in conventional
single unit.
methods for ‘piping-up.’
Designed for remote mounting from the
• Metal or field replaceable soft
instrument via 1/4-inch NPT threaded
seats, this unique seat can be
instrument and process connections, the
converted from metal to soft simply by
MM5 uses H5 miniature bonnets which are
fitting a soft seat and flow washer. Soft
available with metal or soft seats. This
seats are field replaceable for easy
versatile design can be converted to soft
maintenance, extending the useful life
seats simply by fitting a soft seat and flow
of the valve.
washer. Available in stainless steel only
MM5 has two block valves, an equalizer • Extended valve life results from rolled
valve and two vent valves. Suitable for stem threads rather than cut, providing
pressure up to 6000 psig [414 barg] and a stronger, more durable thread area.
temperatures of up to 500°F [260°C], MM5
has a Teflon® stem packing and the choice • Back seat stem prevents stem
of Delrin®, PCTFE or PEEK soft seats. blowout or accidental removal while in
operation.
Applications
• Threaded vent ports allow the vent to
• Compact instrument control loops. be safely piped away, supplied plugged
• Differential Pressure instruments. as standard.

• Control Panels. • Manifold mounting, manifolds are

supplied with mounting holes as
• Gas sampling equipment. standard to enable surface or cabinet
mounting.
• Differential Pressure changes.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

102
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – MM5 Specifications

MM5 Dimensions, inches [mm]

28 [71]
Vent 4.50 [114.3]
1.0 [25] Plug (2)
Instrument Instrument Side 2.25 [57]
Vent
Plug (2)

Vent
Vent/Test Vent/Test Valves
Equalize
Block/Isolate Block/Isolat Equalize 3.74
Valve [95]
4.5
[114]
Block/
Process Isolate
Valves

Process Side ø 0.38 [9.5]

Mounting Holes
2 Places

MM5 Standard Materials

Valve1 Body Bonnet Stem Soft Seat2 Flow Washer Packing
SS 316 SS 316 SS 316 SS PCTFE 316 SS Teflon®
SG3 316 SS 316 SS Monel® 400 PCTFE 316 SS Teflon®

Connections Soft Seat

Standard Connections All miniature manifolds and valves feature a
Threaded 1/4-inch NPT to ANSI/ASME unique valve seat which may be converted
B1.20.1. from metal to soft simply by fitting a soft
seat and flow washer. SS valves use
Other Connections
PCTFE2 soft seat as standard. Delrin® and
Threaded 1/4-inch BSP Tr to BS21
PEEK seats are also available.
Please consult the factory for availability.

Bonnet Assembly Notes

The H5 bonnet assembly has a compact 1. Approximate valve weight: 6.0 lb [2.7 kg].
design with a one-piece rotating stem 0.136-inch [3.5 mm] diameter orifice.
which is ‘V’ tipped for ‘better’ flow control. Valve Cv hard seat 0.25 maximum.
Valve Cv soft seat 0.24 maximum.
The stem threads are rolled and lubricated
to prevent galling and reduce operating 2. PCTFE (Polychlorotrifluoroethylene) is the
torque. exact equivalent of Kel-F®.
3. SG (Sour Gas) meets the requirements of
The SS bonnet is fitted with an adjustable NACE MR0175/ISO 15156-3 Corrigendum 2
Teflon® stem packing. (for Chloride conditions ≤ 50 mg/l [ppm])
and NACE MR0103-2005.
The H5 bonnets are assembled with a
bonnet locking pin to prevent accidental 4. Threaded connection – vent supplied with
blocking plug as standard.
removal in service.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

103
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Differential Pressure Manifolds – MM5 Specifications

Pressure vs. Temperature Pressure and Temperature Ratings

Valve Teflon® Packed
PEEK Seat
Delrin® 6000 psig @ 200°F
6000 PCTFE [414 barg @ 93°C]
[414] Hard Seat Hard
4000 psig @ 500°F
Denotes intersecting
5000 data [276 barg @ 260°C]
[345]
3000 psig @ 200°F
Pressure psig [barg]

4000
Delrin®/PCTFE
[207 barg @ 93°C]
[276]
6000 psig @ 200°F
3000 [414 barg @ 93°C]
[207] PEEK
3000 psig @ 300°F
2000 [207 barg @ 149°C]
[138]

1000
[69]

0
0 100 200 300 400 500
[-18] [38] [93] [149] [204] [260]

Temperature °F [°C]

Ordering Information

MM5 V I S – 2 – SG

Valve Type
MM5

Bonnet Packing
V – Teflon®

Seat
Hard Soft
I – Integral D – Delrin®
(body material) K – PCTFE
E – PEEK

Body Material
S – SS, A479-316

Process Connections
2 – 1/4-inch FNPT

Options
BSP Tr – BSP Taper Thread
OC – Cleaned for oxygen service
SG – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and NACE MR0103-2005
SP – Special Requirements - please specify

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

104
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Integral Manifolds – MC and MT

Product Overview
Integral manifolds are those uniquely
connected to the transmitter of a specific
manufacturer’s model and cannot be used
on a different transmitter brand. This
section is presently characterized by
manifolds designed specifically for
Rosemount® Transmitter Models 3051,
2024 and 3095.

The manifold/transmitter assembly has the

advantage of small size, light weight and
may be either 2-inch pipe stand or wall
MC2
mounted. Plugged or valved vent/test ports
are standard for field calibration checks.

This section has two parts: MC3

1. Integral manifolds. MC5
2. Integral manifolds for ASME B31.1 or
B31.3 fossil fuel power plants.

Coplanar™ Compatible
All the Anderson Greenwood Integral
Manifolds are designed and thoroughly
tested to be compatible with the
Rosemount® Coplanar™ pressure
transmitters including the Model 3051C,
Model 3051P, Model 2024 and the Model
3095 Multivariable™ transmitters.

Coplanar™ Style Transmitters

MT2
Rosemount®’s unique Coplanar™ design
(sense diaphragms are on the same plane)
has allowed Anderson Greenwood to
develop a new series of process instrument
manifolds specifically designed to MT3
‘integrate’ the manifold to the transmitter.

Bonnet Assembly Feature • Dust cover prevents lubricant washout • Body-Bonnet seal is in constant
• Ball end stem eliminates seat galling, and keeps contaminants (dirt, rain, etc.) compression, below the bonnet threads.
provides bubble-tight shutoff and long out of bonnet assembly. This prevents thread corrosion,
life. The hardened, non-rotating ball eliminates possible tensile breakage of
ensures perfect alignment, closure after • Safety back seating prevents stem
bonnet and gives a reliable seal point.
closure. blowout or accidental removal while in
operation. Also provides a metal-to- • Bonnet lock pin is another safety
• Packing below threads prevents metal secondary stem seal while in the feature, which prevents the accidental
lubricant washout, thread corrosion, and full open position. separation of the bonnet from the body.
keeps solids from entering the thread However, normal valve maintenance and
area which can cause galling. Also • Chrome plating of 316 SS stem
repair are still easily accomplished.
prevents process contamination. prevents galling or freezing of thread
when similar metals mate. Rolled • Ease of installation commissioning.
• Adjustable packing adjusts easily; threads provide additional thread Patented porting design allows
loosen jam nut, tighten bushing slightly, strength. The stem, bonnet, and male complete venting of process fluids
then retighten jam nut. Decreases NPT threads are rolled, not cut. before startup.
packing replacement downtime and
increases valve life. • Mirror stem finish burnished to a
16 RMS finish in the packing area.
Enables smooth stem operation and
extends packing life.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

105
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Integral Manifolds – MC2 2-Valve Manifold for

Static Pressure
Dimensions, inches [mm] Instrument

Vent/Test

Vent Slot
Block/Isolate
VENT B
Max.
Open
Process
K
C
LO
B

Dimensions, inches [mm]

1.626
Valve1 A B
[41.30] 2.50
[63.5] 6.85 5.10
Teflon® Packed
[174.0] [129.5]
GRAFOIL®/
7.49 5.75
Low Emissions
[190.2] [146.1]
2.126 Graphite Packed
[54.0]
4.31 [109.5] ø 0.47 [12.0]
Mounting Holes
A Max. Open 4 Places Notes
1/4
- 18 NPT 1. Approximate valve weight: 4.1 lb [1.9 kg].
0.375 - 16UNC - 2B x 0.58 Vent Connection 0.50 [12.7]
[14.7] Deep 2 Places 0.156-inch [4.0 mm] diameter orifice.
1.03 [26.2] Valve Cv 0.36 maximum.
2. Body face is slotted to assure atmospheric
vent when a differential transmitter is used.
1.33
[33.8] 3. SG (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum 2
1/4 - 18 NPT
(for Chloride conditions ≤ 50 mg/l [ppm])
or 1/2 - 14 NPT and NACE MR0103-2005.
Process Connection 3.06 [77.7]
2 Places 4. SG3 (Sour Gas) meets the requirements of
3.35 [85.1]
NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm]).

Pressure and Temperature Ratings Standard Materials

Valve Packing Ratings Valve Body and Stem and
Bonnet2 Ball
6000 psig @ 200°F [414 barg @ 93°C]
SS Teflon®
4000 psig @ 500°F [276 barg @ 260°C] A479-316 A276-316
SS
GRAFOIL®/ 6000 psig @ 200°F [414 barg @ 93°C] 316 316
SS
Low Emissions Graphite 1500 psig @1000°F [103 barg @ 538°C] A479-316 Monel® 400
SG3
6000 psig @ 200°F [414 barg @ 93°C] 316 Monel® K500
SG3 Teflon®
4000 psig @ 500°F [276 barg @ 260°C] Hastelloy® C-276
SG34 Hastelloy® C-276
Elgiloy®
GRAFOIL®/ 6000 psig @ 200°F [414 barg @ 93°C]
SG3
Low Emissions Graphite 1500 psig @1000°F [103 barg @ 538°C]
6000 psig @ 200°F [414 barg @ 93°C]
SG34 Teflon®
4000 psig @ 500°F [276 barg @ 260°C]
GRAFOIL®/ 6000 psig @ 200°F [414 barg @ 93°C]
SG34
Low Emissions Graphite 1500 psig @1000°F [103 barg @ 538°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

106
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Integral Manifolds – MC3 3-Valve Manifold with

Optional Externally Valved Test Ports
Instrument Dimensions, inches [mm]

Equalize
B
Max.
Block/ Block/ Open
Isolate Isolate EQUALIZE

B
LO
CK C
O K
BL
Process

Dimensions, inches [mm] 1.626 [41.3]

2.50
Valve1 A B [63.5]

9.60 5.10
Teflon® Packed
[243.8] [129.5]
2.126
GRAFOIL®/ [54.00] ø 0.47 [12.0]
10.98 5.75 Mounting Holes
Low Emissions 4.63 [117.6]
[278.9] [146.1] 4 Places
Graphite Packed A Max. Open

Notes
1. Approximate valve weight: 0.375 – 16UNC – 2B x 0.58 [14.7] Deep
2 Places
5.0 lb [2.3 kg] for MC3VI [ ]-2-H5,
4.4 lb [2.0 kg] for MC3VI [ ]-2
0.156-inch [4.0 mm] diameter orifice. 1.03 [26.2] 1.33
Valve Cv 0.36 maximum. [33.8]
2. Optional test port valves are H5VDS-22,
convertible soft-to-metal seat.
2.126 [54.0]
3. SG (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum 2 3.35 [85.1]
(for Chloride conditions ≤ 50 mg/l [ppm]) and 1/4– 18 NPT or 1/2 –14 NPT
NACE MR0103-2005. Process Connection
2 Places
4. SG3 (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm]).

Standard Materials Pressure and Temperature Ratings

2
Valve Body and Stem and Valve Packing Ratings
Bonnet Ball
6000 psig @ 200°F [414 barg @ 93°C]
SS Teflon®
A479-316 A276-316 4000 psig @ 500°F [276 barg @ 260°C]
SS
316 316 GRAFOIL®/ 6000 psig @ 200°F [414 barg @ 93°C]
SS
A479-316 Monel® 400 Low Emissions Graphite 1500 psig @1000°F [103 barg @ 538°C]
SG3
316 Monel® K500 6000 psig @ 200°F [414 barg @ 93°C]
SG3 Teflon®
Hastelloy® C-276 4000 psig @ 500°F [276 barg @ 260°C]
SG34 Hastelloy® C-276
Elgiloy®
GRAFOIL®/ 6000 psig @ 200°F [414 barg @ 93°C]
SG3
Low Emissions Graphite 1500 psig @1000°F [103 barg @ 538°C]
6000 psig @ 200°F [414 barg @ 93°C]
SG34 Teflon®
4000 psig @ 500°F [276 barg @ 260°C]
GRAFOIL®/ 6000 psig @ 200°F [414 barg @ 93°C]
SG34
Low Emissions Graphite 1500 psig @1000°F [103 barg @ 538°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

107
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Integral Manifolds – MC5G 5-Valve Manifold for

Gas Service (Patent Protected)
Dimensions, inches [mm]

ø 0.47 [12.0] Mounting Holes Instrument

4 Places
Equalize Equalize
4.86
[123.4]
Max.
Open
BL
CK

O
CK
O
BL

Block/ Block/
Isolate Isolate
2.50 Vent
[63.5]

Process

2.126
[54.0] 1.626
5.25 [133.4] [41.3]

9.38 [238.2] Max. Open

0.375 – 16UNC – x 0.58 Deep

Mounting Holes
2 Places 1.03 [26.2]

1.33
[33.8]

2.126 [54.0] 1/4 - 18 NPT Plug

Static Ports
1/4 - 18 NPT 3.35 [85.1] 2 Places
Vent Connection 1/2 - 14 NPT
4.125 [104.8] Process Connection
2 Places

Standard Materials Notes

Valve1 Body and Bonnet Stem and Ball Packing 1. Approximate valve weight: 4.8 lb [2.2 kg].
0.136-inch [3.5 mm] diameter orifice.
A479-316 A276-316 Valve Cv 0.24 maximum.
SS Teflon®
316 316
2. SG (Sour Gas) meets the requirements of
A479-316 Monel® 400 NACE MR0175/ISO 15156-3 Corrigendum 2
SG2 Teflon® (for Chloride conditions ≤ 50 mg/l [ppm]) and
316/Monel® Monel® K500
NACE MR0103-2005.
Hastelloy® C-276
SG33 Hastelloy® C-276 Teflon® 3. SG3 (Sour Gas) meets the requirements of
Elgiloy®
NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm]).

Pressure and Temperature Ratings

Valve Ratings
6000 psig @ 200°F [414 barg @ 93°C]
SS, SG2, SG33
4000 psig @ 500°F [276 barg @ 260°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

108
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Integral Manifolds – MC5P 5-Valve Manifold with

Two Integral Test Valves (Patent Protected)
Dimensions, inches [mm]

Instrument

Vent/Test Vent/Test
Equalize
B
Max
Block/ Block/ EQUALIZE Open
Isolate Isolate BL
CK O
CK
O
BL
2.50 [63.5]
Process
1.626 [41.3]

VENT
VENT
Dimensions, inches [mm] 2.126
Note 4 [54.0] ø 0.47 [12.0] thru
Valve1 A B 5.75 [146.1] 4 Places

10.95 5.10 A Max. Open

Teflon® Packed
[278.1] [129.5] 0.375 – 16UNC – x 0.58 Deep
2 Places 1.03 [26.2]
GRAFOIL®/
12.40 5.75
Low Emissions
[315.0] [146.1] 1.33

VENT
VENT

Graphite Packed
[33.8]

2.126 [54.0]
1/4 - 18 NPT
1/2
- 14 NPT 3.35 [85.1] Vent Connection
Process Connection
2 Places 4.13 [104.8]

Notes Standard Materials

1. Approximate valve weight: 5.3 lb [2.4 kg]. Valve1 Body and Bonnet Stem and Ball Packing
0.156-inch [4.0 mm] diameter orifice.
Valve Cv 0.36 maximum. A479-316 A276-316
SS Teflon®
316 316
2. SG (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum 2 A479-316 Monel® 400
(for Chloride conditions ≤ 50 mg/l [ppm]) and SG2 Teflon®
316/Monel® Monel® K500
NACE MR0103-2005.
Hastelloy® C-276
3. SG3 (Sour Gas) meets the requirements of SG33 Hastelloy® C-276 Teflon®
Elgiloy®
NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm]).
4. Valve Bonnet labels not supplied on
GRAFOIL® packed bonnets due to
temperature limitations.
Pressure and Temperature Ratings
Valve Ratings
6000 psig @ 200°F [414 barg @ 93°C]
SS, SG2, SG33
4000 psig @ 500°F [276 barg @ 260°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

109
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Integral Manifolds – MT2 2-Valve Manifold for

Static Pressure
Dimensions, inches [mm]

A
Max. Open

3.36 [85.3] B
Bracket Max. Open
Flange
ø 0.47 [12.0] Vent Slot
Mounting Holes
Transmitter
4 Places Face
3.46
[87.9]
1.626

VENT
[41.30]

1.72
[43.7]
0.91 [23.1]
ROCESS

1/4 - 18 NPT
1.38 [35.0] 2.126 1.15 [29.2]
[54.0] Vent Connection
1/4 - 18 NPT

Process Connection

Standard Materials Dimensions, inches [mm] Notes

Valve Body and Stem and Valve1 A B 1. Approximate valve weight: 4.6 lb [2.09 kg].
Bonnet2 Ball 0.156-inch [4.0 mm] diameter orifice.
6.79 4.04 Valve Cv 0.36 maximum.
Teflon® Packed
A351-CF8M SS A276-316 [172.5] [102.6]
SS 2. Body face is slotted to assure atmospheric
316 316 GRAFOIL®/ vent when a differential transmitter is used.
7.44 4.69
A351-CF8M SS Monel® 400 Low Emissions 3. SG (Sour Gas) meets the requirements of
SG3 [188.9] [119.1]
316 Monel® K500 Graphite Packed NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and
Hastelloy® C-276
SG34 Hastelloy® C-276 NACE MR0103-2005.
Elgiloy®
4. SG3 (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm]).

Pressure and Temperature Ratings Instrument

Valve Packing Ratings

6000 psig @ 200°F [414 barg @ 93°C] Vent/Test
SS Teflon®
4000 psig @ 500°F [276 barg @ 260°C]
GRAFOIL®/ 6000 psig @ 200°F [414 barg @ 93°C]
SS Block/Isolate
Low Emissions Graphite 1500 psig @1000°F [103 barg @ 538°C]
6000 psig @ 200°F [414 barg @ 93°C]
SG3 Teflon®
4000 psig @ 500°F [276 barg @ 260°C]
Process
GRAFOIL®/ 6000 psig @ 200°F [414 barg @ 93°C]
SG3
Low Emissions Graphite 1500 psig @1000°F [103 barg @ 538°C]
6000 psig @ 200°F [414 barg @ 93°C]
SG34 Teflon®
4000 psig @ 500°F [276 barg @ 260°C]
GRAFOIL®/ 6000 psig @ 200°F [414 barg @ 93°C]
SG34
Low Emissions Graphite 1500 psig @1000°F [103 barg @ 538°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

110
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Integral Manifolds – MT3 3-Valve Manifold with

Test Ports
Dimensions, inches [mm]

A Max. Open
1/4
- 18 NPT 3.36 [85.3] Bracket B Max. Open
Vent/Test Connection 2.126 Flange
0.61 [15.5] 0.95 [24.1]
[54.0]

ø 0.47 [12.0]
Mounting Holes
3.46 4 Places Transmitter
[87.9] Face

EQUALIZE
1.626
[41.3]

BLOCK
1.72
[43.7]
ROCESS

2.126 1.15 [29.2] 0.91 [23.1]

1.38 [35.0] [54.0]
1/4
- 18 NPT 1.18 [30.0]
Process Connection
2 Places

Standard Materials2 Dimensions, inches [mm] Notes

Valve Body and Stem and Valve1 A B 1. Approximate valve weight: 4.9 lb [2.22 kg].
Bonnet Ball 0.156-inch [4.0 mm] diameter orifice.
9.72 4.04 Valve Cv 0.36 maximum.
Teflon® Packed
A351-CF8M SS A276-316 [246.9] [102.6]
SS 2. Monel® and Hastelloy® are also available.
316 316 GRAFOIL®/
11.02 4.69 3. SG (Sour Gas) meets the requirements of
A351-CF8M SS Monel® 400 Low Emissions NACE MR0175/ISO 15156-3 Corrigendum 2
SG3 [279.9] [119.1]
316 Monel® K500 Graphite Packed (for Chloride conditions ≤ 50 mg/l [ppm]) and
NACE MR0103-2005.
Hastelloy® C-276
SG34 Hastelloy® C-276 4. SG3 (Sour Gas) meets the requirements of
Elgiloy®
NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm]).

Instrument Pressure and Temperature Ratings

Valve Body and Bonnet Ratings
Vent/ Equalize Vent/
Test Test 6000 psig @ 200°F [414 barg @ 93°C]
SS Teflon®
4000 psig @ 500°F [276 barg @ 260°C]
GRAFOIL®/ 6000 psig @ 200°F [414 barg @ 93°C]
Block/Isolate Block/Isolate SS
Low Emissions Graphite 1500 psig @ 1000°F [103 barg @ 538°C]
6000 psig @ 200°F [414 barg @ 93°C]
SG3 Teflon®
4000 psig @ 500°F [276 barg @ 260°C]
GRAFOIL®/ 6000 psig @ 200°F [414 barg @ 93°C]
SG3
Low Emissions Graphite 1500 psig @ 1000°F [103 barg @ 538°C]
6000 psig @ 200°F [414 barg @ 93°C]
SG34 Teflon®
4000 psig @ 500°F [276 barg @ 260°C]
GRAFOIL®/ 6000 psig @ 200°F [414 barg @ 93°C]
SG34
Low Emissions Graphite 1500 psig @ 1000°F [103 barg @ 538°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

111
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Integral Manifolds – MC and MT

Pressure vs. Temperature

GRAFOIL® or
6000 Low Emmissions
[414] packed
Teflon® packed
5000 Denotes
[345]
Pressure psig [barg]

intersecting data

4000
[276]

3000
[207]

2000
[138]

1000
[69]

0 100 200 300 400 500 600 700 800 900 1000
[-18] [38] [93] [149] [204] [260] [316] [371] [427] [482] [538]

Temperature °F [°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

112
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Integral Manifolds – MC and MT

MC/MT AGCO Mount Kits

Manifold Kit Material
Style Part No.

MT 02.1639.971 CS1
MT 02.1639.972 SS
3.0
MC 06.1662.502 CS1 [76.2] 3.0
[76.2]
MC 06.1662.501 SS

Note
Rain Cap
1. Zinc cobalt plated.
Rain
Cap

(2-inch pipe stand

shown for refernce only) (2-inch pipe stand
shown for refernce only)

MC Steam Block Option Kit

Manifold Part No. Material
Style
MC 02.1639.901 SS
1.06
[26.9]

Steam Block

Rain Cap

(2-inch pipe stand shown

for refernce only)

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

113
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Integral Manifolds – MC (Rosemount® Coplanar™ only)

Specifications
Ordering Information
MC 3 V I S –4 – PS1

Style
MC – Coplanar™

Type
2 – 2-Valve (static pressure)
3 – 3-Valve (ΔP)
5G – 5-Valve (gas) (ΔP)
5P – 5-Valve (power) (ΔP)

Packing
V – Teflon®
H – GRAFOIL® (not available for MC5G)
E – Low Emissions Graphite (not available for MC5G)

Seat
I – Integral (body material)

Material
S – 316 SS
J – Hastelloy®

End Connection
4 – 1/2-inch FNPT

Options
AL – Arctic Lubricant (low temperature service -70°F) - not available for CS valves
AM – AGCO Mount Kit for 2-inch pipe stand mounting of manifold (page 113)
BK2 – Optional Bolt and Gasket Kit - contact factory
BL – Bonnet Lock Device (page 154) (standard on power plant manifolds)
CB – Ceramic Ball Ended Stem
CL – Cleaned for chlorine service
H5 – H5VS-22 Vent Valve (2) (MC3 only)
1H5 – H5VS-22 Vent Valve (1) (MC2, MC3 only)
HD – Hydrostatic testing (100 percent) (MSS SP-61)
OC – Cleaned for oxygen service
PS1 – Required MC5G Static Test Ports only
SB – Steam Block (MC only)
SG – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2 (for
Chloride conditions ≤ 50 mg/l [ppm]) and NACE MR0103-2005
SG3 – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2 (for
Chloride conditions > 50 mg/l [ppm])
ST – Stellite Ball Ended Stem
SP – Special Requirements - please specify

Notes
1. Required on MC5G Static Test.
2. Bolts and gaskets are not included; contact
factory if bolts or gaskets are required.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

114
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Integral Manifolds – MT (Rosemount® Coplanar™ only)

Specifications
Ordering Information
MT 3 V I S –2 – SG

Style
MT – Traditional
(double flanged)

Type
2 – 2-Valve (static pressure)
3 – 3-Valve (ΔP)

Packing
V – Teflon®
H – GRAFOIL®
E – Low Emissions Graphite

Seat
I – Integral (body material)

Material
S – 316 SS
J – Hastelloy®

End Connection
2 – 1/4-inch FNPT (use if futbol mounting to inlet)

Options
AL – Arctic Lubricant (low temperature service -70°F) - not available for CS valves
AM – AGCO Mount Kit for 2-inch pipe stand mounting of manifold (page 113)
BK1 – Optional Bolt and Gasket Kit - contact factory
BL – Bonnet Lock Device (page 154) (standard on power plant manifolds)
CB – Ceramic Ball Ended Stem
CL – Cleaned for chlorine service
HD – Hydrostatic testing (100 percent) (MSS SP-61)
OC – Cleaned for oxygen service
SG – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and NACE MR0103-2005
SG3 – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm])
ST – Stellite Ball Ended Stem
SP – Special Requirements - please specify

Note
1. Bolts and gaskets are not included; contact
factory if bolts or gaskets are required.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

115
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Integral Manifolds – MC and MT ASME B31.1 or B31.3

Specifications Meets MSS SP-1053
MC ASME B31.1 Ordering Information – Power Industry Applications1 Notes
MC 3HP S –4 – XP – SP 1. All Manifolds come standard with GRAFOIL®
packing, integral seats, bonnet locks, and
are subjected to hydrostatic testing.

Style 2. Manifold ratings:

SST
MC – Coplanar™
6000 psig @ 100°F [414 barg @ 38°C]
3030 psig @ 1000°F [209 barg @ 538°C]
Type
3. See page 156 for Code Requirements.
2HP – 2-Valve (static pressure)
4. Bolts and gaskets are not included; contact
3HP – 3-Valve (ΔP) factory if bolts or gaskets are required.
5PHP – 5-Valve (power) (ΔP)

Material
S – 316 SS

End Connection
4 – 1/2-inch FNPT

Options
AM – AGCO Mount Kit for 2-inch pipe stand mounting of manifold (page 113)
BK4 – Optional Bolt and Gasket Kit - contact factory
SP – Special Requirements - please specify

MT ASME B31.1 Ordering Information – Power Industry Applications1

MT 3HP S –2 – XP – SP

Style
MT – Traditional (double flanged)

Type
2HP – 2-Valve (static pressure)
3HP – 3-Valve (ΔP)

Material
S – 316 SS

End Connection
2 – 1/4-inch FNPT (use if futbol mounting to inlet)

Options
AM – AGCO Mount Kit for 2-inch pipe stand mounting of manifold (page 113)
BK4 – Optional Bolt and Gasket Kit - contact factory
SP – Special Requirements - please specify

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

116
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Integral Manifolds – MB for Bottom Inlet, Low Profile

Transmitters
Product Overview
The MB integral manifold is uniquely
connected to a low-profile transmitter with
a flanged bottom inlet 21⁄8-inches [54 mm]
center-to-center connection.

The manifold/transmitter assembly has the

advantage of small size, light weight and
may be either 2-inch pipe stand or wall
mounted. Plugged or valved vent/test ports
are standard for field calibration checks.

This section has two parts:

1. Integral manifolds.
2. Integral manifolds for ASME B31.1 or
B31.3 fossil fuel power plants. MB2

MB3

MB5

Bonnet Assembly Feature • Chrome plating of 316 SS stem

• Ball end stem eliminates seat galling, prevents galling or freezing of thread
provides bubble-tight shutoff and long when similar metals mate. Rolled
life. The hardened, non-rotating ball threads provide additional thread
ensures perfect alignment, closure after strength. The stem, bonnet, and male
closure. NPT threads are rolled, not cut.

• Packing below threads prevents • Mirror stem finish burnished to a

lubricant washout, thread corrosion, and 16 RMS finish in the packing area.
keeps solids from entering the thread Enables smooth stem operation and
area which can cause galling. Also extends packing life.
prevents process contamination.
• Body-Bonnet seal is in constant
• Adjustable packing adjusts easily; compression, below the bonnet threads.
loosen jam nut, tighten bushing slightly, This prevents thread corrosion,
then retighten jam nut. Decreases eliminates possible tensile breakage of
packing replacement downtime and bonnet and gives a reliable seal point.
increases valve life.
• Bonnet lock pin is another safety
• Dust cover prevents lubricant washout feature, which prevents the accidental
and keeps contaminants (dirt, rain, etc.) separation of the bonnet from the body.
out of bonnet assembly. However, normal valve maintenance and
repair are still easily accomplished.
• Safety back seating prevents stem
blowout or accidental removal while in
operation. Also provides a metal-to-
metal secondary stem seal while in the
full open position.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

117
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Integral Manifolds – MB2 2-Valve Manifold for

Static Pressure
Instrument
Dimensions, inches [mm]

Vent/Test

Block/Isolate
B
Max.
Open

Process

Dimensions, inches [mm]

1.626 Valve1 A B
[41.3] 2.50
[63.5] 6.85 5.10
Teflon® Packed
[174.0] [129.5]
GRAFOIL® and
7.49 5.75
2.126 Low Emissions
[54.00] ø 0.47 [12.0] [190.2] [146.1]
Graphite Packed
5.50 [139.7] Mounting Holes
4 Places
A Max. Open

0.375 - 16UNC x 0.58 [14.7] Deep 1.03 [26.2]

2 Places Notes
1.03 [26.2]
1. Approximate valve weight: 4.1 lb [1.9 kg].
0.156-inch [4.0 mm] diameter orifice.
1.33
[33.8] Valve Cv 0.36 maximum.
2. SG (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum 2
3.06 [77.7] 1/4 - 18 NPT (for Chloride conditions ≤ 50 mg/l [ppm]) and
Vent Connection NACE MR0103-2005.
3.35 [85.1]
1/2- 14 NPT 3. SG3 (Sour Gas) meets the requirements of
Process Connection NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm]).

Pressure and Temperature Ratings Standard Materials

Valve Packing Ratings Valve Body and Stem and
Bonnet Ball
6000 psig @ 200°F [414 barg @ 93°C]
SS Teflon®
4000 psig @ 500°F [276 barg @ 260°C] A479-316 A276-316
SS
GRAFOIL®/ 6000 psig @ 200°F [414 barg @ 93°C] 316 316
SS
Low Emissions Graphite 1500 psig @1000°F [103 barg @ 538°C] A479-316 Monel® 400
SG2
6000 psig @ 200°F [414 barg @ 93°C] 316 Monel® K500
SG2 Teflon®
4000 psig @ 500°F [276 barg @ 260°C] Hastelloy® C-276
SG33 Hastelloy® C-276
Elgiloy®
GRAFOIL®/ 6000 psig @ 200°F [414 barg @ 93°C]
SG2
Low Emissions Graphite 1500 psig @1000°F [103 barg @ 538°C]
6000 psig @ 200°F [414 barg @ 93°C]
SG33 Teflon®
4000 psig @ 500°F [276 barg @ 260°C]
GRAFOIL®/ 6000 psig @ 200°F [414 barg @ 93°C]
SG33
Low Emissions Graphite 1500 psig @1000°F [103 barg @ 538°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

118
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Integral Manifolds – MB3 3-Valve Manifold with

Optional Externally Valved Test Ports
Instrument Dimensions, inches [mm]

Equalize

Block/ Block/
B
Isolate Isolate Max.
Open

Process B
LO
CK C
O K
BL

Dimensions, inches [mm]

Valve1 A B 1.626
[41.3] 2.50
10.95 5.10 [63.5]
Teflon® Packed
[278.1] [129.5]
GRAFOIL® and
12.40 5.75
Low Emissions 2.126
[315.0] [146.1] [54.00] ø 0.47 [12.0]
Graphite Packed
4.63 [117.6] Mounting Holes
4 Places
A Max. Open
Notes
0.375 - 16UNC x 0.58 [14.7] Deep 1.03 [26.2]
1. Approximate valve weight: 2 Places
5.0 lb [2.3 kg] for MC3VI [ ]-2-H5,
4.4 lb [2.0 kg] for MC3VI [ ]-2
0.156-inch [4.0 mm] diameter orifice. 1.33
[33.8]
Valve Cv 0.36 maximum.
2. Optional test port valves are H5VDS-22, soft
seat only. 2.126 [54.0]
3. SG (Sour Gas) meets the requirements of 3.35 [85.1]
NACE MR0175/ISO 15156-3 Corrigendum 2 1/2- 14 NPT
(for Chloride conditions ≤ 50 mg/l [ppm]) and Process Connection
NACE MR0103-2005. 2 Places

4. SG3 (Sour Gas) meets the requirements of

NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm]).

Standard Materials Pressure and Temperature Ratings

Valve2 Body and Stem and Valve Packing Ratings
Bonnet Ball
6000 psig @ 200°F [414 barg @ 93°C]
SS Teflon®
A479-316 A276-316 4000 psig @ 500°F [276 barg @ 260°C]
SS
316 316 GRAFOIL®/ 6000 psig @ 200°F [414 barg @ 93°C]
SS
A479-316 Monel® 400 Low Emissions Graphite 1500 psig @1000°F [103 barg @ 538°C]
SG3
316 Monel® K500 6000 psig @ 200°F [414 barg @ 93°C]
SG3 Teflon®
Hastelloy® C-276 4000 psig @ 500°F [276 barg @ 260°C]
SG34 Hastelloy® C-276
Elgiloy®
GRAFOIL®/ 6000 psig @ 200°F [414 barg @ 93°C]
SG3
Low Emissions Graphite 1500 psig @1000°F [103 barg @ 538°C]
6000 psig @ 200°F [414 barg @ 93°C]
SG34 Teflon®
4000 psig @ 500°F [276 barg @ 260°C]
GRAFOIL®/ 6000 psig @ 200°F [414 barg @ 93°C]
SG34
Low Emissions Graphite 1500 psig @1000°F [103 barg @ 538°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

119
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Integral Manifolds – MB5G 5-Valve Manifold for

Gas Service (Patent Protected)
Dimensions, inches [mm]

Instrument

Equalize Equalize

4.86
[123.4]
Max.
Open
Block/ Block/
Isolate Isolate
Vent
2.50
[63.5]

Process
1.626
[41.3]
2.126
[54.0] ø 0.47 [12.0]
Mounting Holes
5.25 [133.4] 4 Places

9.38 [238.2] Max. Open

0.375 - 16UNC x 0.58 [14.7]

Deep Mounting Holes
2 Places 1.03
[26.2]

1.33
[33.8]

1/4 - 18 NPT Plug

2.126 Static Ports
1/4 - 18 NPT [54.0] 2 Places
Vent Connection 3.35 [85.1] 1/2 - 14 NPT
Process Connection
4.125 [104.8] 2 Places

Standard Materials Notes

Valve1 Body and Bonnet Stem and Ball Packing 1. Approximate valve weight: 5.3 lb [2.4 kg].
0.156-inch [4.0 mm] diameter orifice.
A479-316 A276-316 Valve Cv 0.36 maximum.
SS Teflon®
316 316
2. SG (Sour Gas) meets the requirements of
A479-316 Monel® 400 NACE MR0175/ISO 15156-3 Corrigendum 2
SG2 Teflon® (for Chloride conditions ≤ 50 mg/l [ppm]) and
316/Monel® Monel® K500
NACE MR0103-2005.
Hastelloy® C-276
SG33 Hastelloy® C-276 Teflon® 3. SG3 (Sour Gas) meets the requirements of
Elgiloy®
NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm]).

Pressure and Temperature Ratings

Valve Ratings
6000 psig @ 200°F [414 barg @ 93°C]
SS, SG2, SG33
4000 psig @ 500°F [276 barg @ 260°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

120
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Integral Manifolds – MB5P 5-Valve Manifold with

Two Integral Test Valves (Patent Protected)
Dimensions, inches [mm]

Instrument

Vent/Test Vent/Test
Equalize
B
EQUALIZE Max.
Open

EQ
Block/ Block/

K
C

U
LO

A
LI
B
Isolate Isolate

ZE
2.50
[63.5]
1.626
Process [41.3]

VENT
VENT
2.126
[54.0] ø 0.47 [12.0]
Mounting Holes
Dimensions, inches [mm] 4 Places
5.50 [139.7]

Valve1 A B A Max. Open

10.95 5.10
Teflon® Packed
[278.1] [129.5]
0.375 - 16 UNC x 0.58 [14.7] Deep
GRAFOIL® or 2 Places 1.03
12.40 5.75
Low Emissions [26.2]
[315.0] [146.1]
Graphite Packed
1.33
[33.8]

1/2 - 14 NPT 1/4- 18 NPT

2.126
Process Connection [54.0] Vent Connection
2 Places 2 Places
3.35 [85.1]
4.125 [104.8]

Notes Standard Materials

1. Approximate valve weight: 5.3 lb [2.4 kg]. Valve Body and Bonnet Stem and Ball Packing
0.156-inch [4.0 mm] diameter orifice.
Valve Cv 0.36 maximum. A479-316 A276-316
SS Teflon®
316 316
2. SG (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum 2 A479-316 Monel® 400
(for Chloride conditions ≤ 50 mg/l [ppm]) and SG2 Teflon®
316/Monel® Monel® K500
NACE MR0103-2005.
Hastelloy® C-276
3. SG3 (Sour Gas) meets the requirements of SG33 Hastelloy® C-276 Teflon®
Elgiloy®
NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm]).
4. Valve Bonnet labels not supplied on
GRAFOIL® packed bonnets due to
temperature limitations.
Pressure and Temperature Ratings
Valve Ratings
6000 psig @ 200°F [414 barg @ 93°C]
SS, SG2, SG33
4000 psig @ 500°F [276 barg @ 260°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

121
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Integral Manifolds – MB Specifications

Pressure vs. Temperature

GRAFOIL® or
6000 Low Emmissions
[414] packed
Teflon® packed
5000 Denotes
[345]
Pressure psig [barg]

intersecting data

4000
[276]

3000
[207]

2000
[138]

1000
[69]

0 100 200 300 400 500 600 700 800 900 1000
[-18] [38] [93] [149] [204] [260] [316] [371] [427] [482] [538]

Temperature °F [°C]

MC/MT AGCO Mount Kits

Manifold Kit Material
Style Part No.
MB 06.1662.502 CS1
MB 06.1662.501 SS
3.0
[76.2]

Note
1. Zinc cobalt plated.

Rain Cap

(2-inch pipe stand

shown for refernce only)

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

122
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Integral Manifolds – MB Specifications

Notes Ordering Information

1. 316 SS bolts lower pressure ratings to a MB 3 V I S – 4 – AM
maximum of 4500 psi [310 barg]. Consult
factory for full rating with 316 SS bolts.
2. Bolts and gaskets are not included; contact Style
factory if bolts or gaskets are required.
MB

Type
2 – 2-Valve (static pressure)
3 – 3-Valve (ΔP)
5G – 5-Valve (gas) (ΔP)
5P – 5-Valve (power) (ΔP)

Packing
V – Teflon®
H – GRAFOIL® (not available for MC5G)
E – Low Emissions Graphite (not available for MC5G)

Seat
I – Integral (body material)

Material
S – 316 SS
J – Hastelloy®

End Connection
4 – 1/2-inch FNPT

Options
AL – Arctic Lubricant (low temperature service -70°F) - not available for CS valves
AM – AGCO Mount Kit for 2-inch pipe stand mounting of manifold (page 122)
BK2 – Optional Bolt and Gasket Kit - contact factory
BL – Bonnet Lock Device (page 154) (standard on power plant manifolds)
CB – Ceramic Ball Ended Stem
CL – Cleaned for chlorine service
H5 – H5VS-22 Vent Valve (2) (MB3 only)
1H5 – H5VS-22 Vent Valve (1) (MB2, MB3 only)
HD – Hydrostatic testing (100 percent) (MSS SP-61)
OC – Cleaned for oxygen service
SSA1 – SS Flange Bolt (grade 18-8) - maximum pressure rating 4500 psi [310 barg]
SSB – 316 SS Flange Bolt (B8M Class 2) - will provide full pressure rating
SSC1 – 316 Flange Bolt (B8M) - maximum pressure rating 4500 psi [310 barg]
SG – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and NACE MR0103-2005 (SS valves only)
SG3 – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm])
SP – Special Requirements - please specify

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

123
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Integral Manifolds – MB ASME B31.1 or B31.3

Specifications Meets MSS SP-1052
MC ASME B31.1 Ordering Information – Power Industry Applications1 Notes
MB 3HP S –4 – XP – SP 1. All Manifolds come standard with GRAFOIL®
packing, integral seats, bonnet locks, and
are subjected to hydrostatic testing.

Style 2. See page 156 for Code Requirements.

MB

Type
2HP – 2-Valve (static pressure)
3HP – 3-Valve (ΔP)
5PHP – 5-Valve (power) (ΔP)

Material
S – 316 SS

End Connection
4 – 1/2-inch FNPT

Options
AM – AGCO Mount Kit for 2-inch pipe stand mounting of manifold (page 122)
BK – Optional Bolt and Gasket Kit - contact factory
SP – Special Requirements - please specify

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

124
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

IntelliMount Systems – IMSA and IMST

Product Overview
The IntelliMount™ System provides distinct
advantages by providing the simplest and
most effective means to install, calibrate IMST Remote Mounted
and service your Coplanar™ style
transmitters. Just what you’ve come to
expect from the leader in process
instrument manifold technology.

All the Anderson Greenwood IntelliMount™

System manifolds are designed and
thoroughly tested to be compatible with the
Rosemount® Coplanar™ style pressure
transmitters including the Model 3051C,
Model 3051P, Model 2024 and the Model
IMSA Direct
3095 Multivariable™ transmitters.
Mounted
The design of the Coplanar™ style
transmitters (process isolation diaphragms are
on the same plane) has allowed Anderson
Greenwood to develop a unique series of
process instrument manifolds. The two-piece
construction of the IntelliMount™ System has
been designed to allow the block-valve
module to remain connected to the orifice
while the instrument module and transmitter
assembly can be easily and safely removed for • Directly mounts to the Coplanar™ • Designed to be smaller and more
shop calibration or maintenance. style transmitter, eliminating the need compact than conventional manifolds
for the Coplanar™ or traditional flange for ease of installation, calibration,
adapters that allow connection of maintenance and accessibility for
Two Models Available operation in cabinet systems.
Coplanar™ style transmitters to
• Direct Mounted (Flange x Flange): conventional manifolds.
Designed primarily for horizontal • Rated to 6000 psig [414 barg] to
installations, the IntelliMount™ System • Modular construction allows field meet the most demanding pressure
provides true direct coupling to the installation of the block-valve module applications.
primary element in the smallest possible independent of the instrument module
• Process connections are available
space. and transmitter. The block-valve module
with 1/2-inch FNPT as standard or with
remains in place during instrument
• Remote Mounted (Pipe x Flange): an instrument flange connection for
calibration and potentially eliminates the
Used in more traditional applications on mounting with close-couple or stabilized
need for separate isolation valves.
gas, vapor or liquid service, the remote futbols.
mounted IntelliMount™ System is • Maximum accuracy potential is
• Transmitter venting is accomplished
designed for ease of installation available by positioning the transmitter
by the use of standard vent plugs or
and use. isolation diaphragms within 1/2-inch
with 1/4-inch NPT controlled vent outlets
[13 mm] of the axis of the process taps.
to allow capture of environmentally
Features and Benefits The instrument module has also been
sensitive process fluids.
• Two-Piece modular assembly designed with large bore passages to
consisting of a block-valve module promote accuracy and improve
(containing two isolation valves) and response time.
the instrument module (containing the
• Modular design allows the instrument
equalize and vent valves), which can be
module and transmitter to be easily
easily disassembled and reassembled
removed in the field while the block
in the field. The interface between the
valve module remains in place,
block valve and instrument modules
facilitating both field service and shop
is a gasket-sealed connection that
calibration of the transmitter.
can be readily remade and has been
proof tested to beyond 25,000 psig
[1724 barg].

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

125
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

IntelliMount Systems – IMSA and IMST Specifications

IMSA Direct Mounted1 – Dimensions, inches [mm]

Note
1. Three-valve dimensions and schematic
shown. Two- and five-valve versions are
available.

8.14
[206.8]
Max.
Open

7.73 [196.3] Max. Open

2.12
[53.8]

3.93
[99.8]
Max.
1.62 [41.1] Open

7/16- 20 UNF - 2B 2.54 5.60 [142.2]

4 Places [63.5] Max. Open

Instrument
Equalize
Vent Vent
Instrument Module

Block Valve Module

Block/ Block/
Isolate Isolate

Process

3-Valve Manifold

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

126
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

IntelliMount Systems – IMSA and IMST Specifications

IMST Remote Mounted – Dimensions, inches [mm]

Note
1. Five-valve dimensions and schematic shown.
7.89 Two- and three-valve versions are available.
[200.4]
Max. Open

8.10 [205.7] Open Max.

2.12
[53.8]

3.93
[99.8]
Max.
Open
1/4-inch NPT

Vent Ports (2)

2.29 5.60 [142.2]

[58.2] Max. Open

Instrument Instrument
Equalize
Equalize Equalize

Vent Instrument Module Vent

Block Valve Module

Vent
Block/ Block/ Block/ Block/
Isolate Isolate Isolate Isolate
Process
Process

5-Valve (Power/Vent) Manifold 5-Valve (Gas) Manifold

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

127
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

IntelliMount Systems – IMSA and IMST Specifications

Standard Materials
Valve1 Seat Packing Body Bonnet Stem Ball
SS Soft Teflon® A351-CF8M 316 A276-316 N/A
SG2 Soft Teflon® A351-CF8M 316 Monel® 400 N/A
SS Integral3 Teflon® A351-CF8M 316 A276-316 316
SG2 Integral3 Teflon® A351-CF8M 316 Monel® 400 Monel® 500
GRAFOIL®/Low
SS Integral3 A351-CF8M 316 A276-316 316
Emissions Graphite
GRAFOIL®/Low
SG2 Integral3 A351-CF8M 316 Monel® 400 Monel® 500
Emissions Graphite

Pressure and Temperature Ratings

Valve Packing Seat Ratings
SS, SG2 Teflon® Delrin®/PCTFE 6000 psig @ 200°F [414 barg @ 93°C]
6000 psig @ 200°F [414 barg @ 93°C]
SS, SG2 Teflon® PEEK
2000 psig @ 400°F [138 barg @ 204°C]
1000 psig @ 150°F [69 barg @ 66°C]
SS, SG2 Teflon® Teflon®
200 psig @ 500°F [14 barg @ 260°C]
6000 psig @ 200°F [414 barg @ 93°C]
SS, SG2 Teflon® Integral3
4000 psig @ 500°F [276 barg @ 260°C]
GRAFOIL®/Low 6000 psig @ 200°F [414 barg @ 200°C]
SS, SG2 Integral3
Emissions Graphite 1500 psig @ 1000°F [103 barg @ 538°C]

Notes
1. Approximate valve weights:
2 valve - 6.8 lb [3.1 kg].
3 valve - 7.2 lb [3.3 kg].
5 valve - 8.2 lb [3.7 kg].
Metal Seat:
0.187-inch [4.8 mm] diameter orifice.
Valve Cv 0.52 maximum.
Soft Seat:
0.187-inch [4.8 mm] diameter orifice.
Valve Cv 0.83 maximum.
2. SG (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and
NACE MR0103-2005.
3. Body Material.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

128
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

IntelliMount Systems – IMSA and IMST Specifications

Pressure and Temperature Ratings – Soft Seat

Delrin®
6000 PCTFE
[414]
Teflon®

5000
PEEK

Pressure psig [barg]

[345] Denotes
intersecting
4000 data
[276]

3000
[207]

2000
[138]

1000
[69]
200
[14] 0

0 100 200 300 400 500

150
[-18] [38] [93] [149] [204] [260]
[68]
Temperature °F [°C]

Pressure and Temperature Ratings – Metal Seat

IMS__VIS
6000
[414] IMS__HIS
IMS__EIS
5000 Denotes
[345]
Pressure psig [barg]

intersecting
data
4000
[276]

3000
[207]

2000
[138]
1500
[103]
1000
[69]

0 100 200 300 400 500 600 700 800 900 1000
[-18] [38] [93] [149] [204] [260] [316] [371] [427] [482] [538]

Temperature °F [°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

129
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

IntelliMount Systems – IMSA and IMST Specifications

Ordering Information
IMST 3 V I S – 4 – SG

Style
IMSA – Direct Mount
(Flange x Flange)
IMST – Remote Mount
(Pipe x Flange)

Type
2 – 2-Valve
3 – 3-Valve
5G – 5-Valve (Gas)
5P – 5-Valve (Power)

Packing
V – Teflon®
H – GRAFOIL®
E – Low Emissions Graphite

Seat
I – Integral
V – Teflon®
D – Delrin®
E – PEEK

Material
S – A351-CF8M

End Connection (IMST only)

4 – 1/2-inch FNPT x Flange

Options
AL – Arctic Lubricant (low temperature service -70°F) - not available for CS valves
BL – Bonnet Lock Device (page 154)
CL – Cleaned for chlorine service
HD – Hydrostatic testing (100 percent) (MSS SP-61)
OC – Cleaned for oxygen service
SG – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and NACE MR0103-2005
SP – Special Requirements - please specify

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

130
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

IntelliMount Systems – IMSA and IMST ASME B31.1 or

ASME B31.3 Specifications Meets MSS SP-1053
Ordering Information – Power Industry Applications1
IMST 3HP S –4 –XP – SP

Style
IMSA – Direct Mount
(Flange x Flange)
IMST – Remote Mount
(Pipe x Flange)

Type
2HP – 2-Valve
3HP – 3-Valve
5PHP – 5-Valve (Power)

Material
S – A351-CF8M

End Connection (IMST only)

4 – 1/2-inch FNPT x Flange

Option
SP – Special Requirements - please specify

Notes
1. All Manifolds come standard with GRAFOIL®
packing, integral seats, bonnet locks, and
are subjected to hydrostatic testing.
2. Manifold ratings:
SST
6000 psig @ 100°F [414 barg @ 38°C]
3030 psig @ 1000°F [209 barg @ 538°C]
3. See page 156 for Code Requirements.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

131
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Natural Gas Manifolds – M6A, M6T, M6TA 5-Valve

Manifolds
Features and Benefits

M6A
M6A
• Easy Installation. The lightweight M6A
is easily installed in meter tubing. No
additional support is generally required.

• Upstream or downstream 1/4-inch

FNPT ports are standard for
connecting the static pressure to the
meter.

M6T • Available with soft or hard seats.

Soft seats are easily replaced in the field
in the event of damage from hydrated or
sand. Soft seats are tolerant to much
abuse from sand, grit, etc. remaining
bubble-tight.

• Bonnet-to-body and stem threads

are isolated from process corrosion –
important in sour gas applications.
M6TA
• Stem backout prevention eliminates
accidental removal while under
pressure.

• Stem packing is standard Viton®

O-ring with TFE back-up ring with long
life assured by mirror finish on stem in
the packing area.

• Integral hard back seat forms a

Product Overview To meet the requirements for differential secondary seal for the stem threads
The M6A Five-Valve Manifold for natural pressure transmitter applications, the M6T when valve is fully opened.
gas applications was first designed and (pipe x flange) and M6TA (flange x flange) • Stem threads are rolled (not cut) to
manufactured in 1960. It soon took over as were designed to provide the family of increase strength and longer life.
the standard for recording orifice meters. M6A, M6T, M6TA for various field
Today, it is still widely used. The M6A is applications. • Either single or double ferrule tube
usually supported in the vertical meter fittings are available integral to the
Recent natural gas measurement field body. This reduces potential leak points.
tubing from the orifice flange union. Static
research has shown that better accuracy
pressure and calibration test connections
results when the transmitter is installed M6T and M6TA
are standard. The unit is available with
directly on the orifice flanges or orifice • Same features and benefits as the
integral tube fittings, if desired.
fitting. Anderson Greenwood has designed M6A plus the following:
Differential pressure transmitter accuracy a family of manifolds and installation
and stability have improved, resulting in configurations to meet the more accurate • May be pipe stand mounted using the
their broader use for natural gas installations and users’ requirements. appropriate AGCO Mount Kit. This
measurement in production and allows the manifold to be mounted prior
For direct mount applications, please to receipt of transmitter. Makes it easier
transmission applications.
consult factory. and quicker to remove the transmitter
for servicing since it is attached only to
the manifold and power source.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

132
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Natural Gas Manifolds – M6A Specifications

M6A Soft Seat (Metal Seat available) Dimensions, inches [mm]

1 /2
- 14 NPT
Instrument 1/4 -18 NPT
Connections 3.38 [85.9] Static (Test) Ports (2)
1.67 [42.4]
ø 0.28 [7.1] Equalize
Mounting Holes Valves
2 Places
Block/Isolate
Valve
2.88
[73.2]

1.03 [26.2]

1/2 - 14 FNPT 1.00 Vent 1.25

Process Connections [25.4] 1/4
- 18 NPT Valve [31.8]
Vent Port
2.12 [53.8]
3.1 [78.7]
8.58 [217.9] Max. Open
Pipe x Pipe

Instrument

Static Static
(Test) (Test)
Equalize Equalize
Block/ Block/
Isolate Vent Isolate

Metal Seat
Process

Note
1. Approximate valve weight: 4.0 lb [1.8 kg].
Metal seat:
0.156-inch [4.0 mm] diameter orifice.
Valve Cv 0.36 maximum.
Soft seat:
0.187-inch [4.8 mm] diameter orifice.
Valve Cv 0.83 maximum.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

133
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Natural Gas Manifolds – M6T Specifications

M6T Soft Seat (Metal Seat available) Dimensions, inches [mm]

1.62
3.40 [86.4] [41.1]
Flanged Transitter
1/4
- 18 NPT 0.64 [16.3] Connections
Static (Test) Ports
(standard) 1/4 - 18 NPT

Static (Test) Ports Bottom

(-TB option)
2 Places
Equalize Valves

3.80
[96.5]

Block/Isolate
Valve
Vent/Test
Valve
1/2 - 14 NPT
1/4 - 18 NPT Vent
Process Connections 2.12 [53.8] 2.65 [67.3]
Max. Open
8.60 [218.4] Max. Open

Instrument

Static Static
(Test) (Test)
Equalize Equalize
Block/ Vent Block/
Isolate Isolate

M6T and M6TA Metal Seat

Process

Notes
1. M6T Installation Kit consists of 4 bolts
7/16-inch -20 x 1-inch A193-B7, 4 washers,

and 2 Teflon® gaskets.

2. Approximate valve weight: 6.0 lb [2.7 kg].
Metal seat:
0.156-inch [4.0 mm] diameter orifice.
Valve Cv 0.36 maximum.
Soft seat:
0.187-inch [4.8 mm] diameter orifice.
Valve Cv 0.83 maximum.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

134
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Natural Gas Manifolds – M6TA Specifications

M6TA Soft Seat (Metal Seat available) Dimensions, inches [mm]

1/4 - 18 NPT Vent

3.40 [86.4] 1.62
Flanged Transmitter [41.1]
Connections 0.64 [16.3]
1/4 -18NPT
1/4 -18NPT Static (Test) Ports
Static (Test) Ports bottom (-TB option)
(standard) 2 Places Equalize Valves

Block/Isolate
Valve 3.80
[96.5]

Vent
Flanged Valve
2.12 [53.8] Process 2.65 [67.3]
Connections Max. Open
8.60 [218.4] Max. Open

Instrument
Notes
1. Approximate valve weight: 6.0 lb [2.7 kg]. Static Static
Metal seat: (Test) (Test)
0.156-inch [4.0 mm] diameter orifice. Equalize Equalize
Valve Cv 0.36 maximum. Block/ Vent Block/
Isolate Isolate
Soft seat:
0.187-inch [4.8 mm] diameter orifice.
Valve Cv 0.83 maximum.
2. M6TA Installation Kit consists of 4 bolts Process
7/16-inch -20 x 1-inch A193-B7, 4 washers,

and 2 Teflon® gaskets.

3. The M6TA high pressure extrusion has
flanged (integral) instrument and process
connections.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

135
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Natural Gas Manifolds – M6A, M6T, M6TA

Specifications
Standard Materials
Valve Seat Body Bonnet Stem Ball Flow
Washer
CS1 Soft A1052 A108 A581-303 N/A 316
CS1 Integral A1052 A108 A581-303 17-4PH N/A
SS Soft A479-316 A479-316 A276-316 N/A 316
SS Integral A479-316 A479-316 A276-316 316 N/A
SG6 Soft A479-316 A479-316 Monel® 400 N/A 316
SG6 Integral A479-316 A479-316 Monel® 400 Monel® K500 N/A
SG37 Hastelloy® C-276 Hastelloy® C-276 Hastelloy® C-276 Hastelloy® C-276 Elgiloy® Hastelloy®

Pressure and Temperature Ratings

Valve Packing Seat Material Standard Bolting SS Bolting
CS1, SS, Teflon® Delrin®
3000 psig @ 200°F [207 barg @ 93°C] 3000 psig @ 200°F [207 barg @ 93°C]
SG6, SG37, Monel® O-ring PCTFE3
Teflon® 6000 psig @ 200°F [414 barg @ 93°C] 4500 psig @ 100°F [310 barg @ 38°C]
CS1, SS, SG6, SG37 PEEK
O-ring 3000 psig @ 300°F [207 barg @ 149°C] 3000 psig @ 300°F [207 barg @ 149°C]
Teflon® 5300 psig @ 200°F4 [365 barg @ 93°C] 4500 psig @ 100°F [310 barg @ 38°C]
Monel® PEEK
O-ring 3000 psig @ 300°F [207 barg @ 149°C] 3000 psig @ 300°F [207 barg @ 149°C]
CS1, SS, 1000 psig @ 150°F [69 barg @ 66°C] 1000 psig @ 150°F [69 barg @ 66°C]
Teflon® Teflon®5
SG6, SG37, Monel® 200 psig @ 500°F [14 barg @ 260°C] 200 psig @ 500°F [14 barg @ 260°C]
Teflon® 6000 psig @ 200°F [414 barg @ 93°C] 4500 psig @ 100°F [310 barg @ 38°C]
GRAFOIL®/
CS1, SS, SG6, SG37 Body Material
Low Emissions 6000 psig @ 200°F [414 barg @ 93°C] 4500 psig @ 100°F [310 barg @ 38°C]
Graphite 4000 psig @ 500°F [276 barg @ 260°C] 3000 psig @ 500°F [207 barg @ 260°C]
Teflon® 5300 psig @ 200°F4 [365 barg @ 93°C] 4500 psig @ 100°F [310 barg @ 38°C]
GRAFOIL®/
Monel® Body Material
Low Emissions 5300 psig @ 200°F4 [365 barg @ 93°C] 4500 psig @ 100°F [310 barg @ 38°C]
Graphite 4000 psig @ 500°F [276 barg @ 260°C] 3000 psig @ 500°F [207 barg @ 260°C]

Notes
1. CS parts are zinc cobalt plated to prevent
corrosion.
2. M6A body material is A108.
3. PCTFE (Polychlorotrifluoroethylene) is the
exact equivalent of Kel-F®.
4. M6A Monel® ratings are:
6000 psig @ 200°F [414 barg @ 93°C]
4000 psig @ 500°F [276 barg @ 260°C].
5. Block valves only.
6. SG (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and
NACE MR0103-2005.
7. SG3 (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm]).

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

136
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Natural Gas Manifolds – M6A, M6T, M6TA

Specifications
Notes Pressure vs. Temperature – Standard Bolting
1. PCTFE (Polychlorotrifluoroethylene) is the
exact equivalent of Kel-F®. Delrin®/PCTFE2
PEEK (CS, SS)
2. M6A Monel® ratings are: PEEK (Monel®)
6000 psig @ 200°F [414 barg @ 93°C] Teflon®
4000 psig @ 500°F [276 barg @ 260°C]. 6000 Metal Seat (CS, SS)
[414] Metal Seat (Monel®)
5300 Denotes intersecting data
[365] 5000
[345]

Pressure psig [barg]

4000
[276]

3000
[207]

2000
[138]

1000
[69]
200
[14] 0

0 100 200 300 400 500

[-18] [38] 150 [93] [149] [204] [260]
[66]

Temperature °F [°C]

Pressure vs. Temperature – SS Bolting

Delrin®/PCTFE2
6000 PEEK
[414]
Teflon®
5000 Metal Seat
[345] Denotes
4500 intersecting data
Pressure psig [barg]

[310]
4000
[276]

3000
[207]

2000
[138]

1000
[69]
200
[14] 0

0 100 200 300 400 500

[-18] [38] 150 [93] [149] [204] [260]
[66]

Temperature °F [°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

137
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Natural Gas Manifolds – M6A, M6T, M6TA

Specifications
Ordering Information1 Notes

M6A V D S –4 – SG 1. For Close Couple Futbols (NPT and Tube-

Ended) and Adapter Kits, order by part
number noted within respective tables or
as part of ACCU-Mount™ Catalog.
Valve Type 2. M6A is A108-1018.

3/16-inch 3. Available for M6A and M6T only.

[4.8 mm] orifice
M6A – Pipe x Pipe 4. Available for M6T only.
M6T – Pipe x Flange 5. 316 SS bolts lower pressure ratings to a
M6TA – Flange x Flange maximum of 4500 psi [310 barg]. Consult
factory for full rating with 316 SS bolts.

Packing
V – Teflon® H – GRAFOIL®
R – O-ring E – Low Emissions Graphite

Seat
Soft: Hard:
V – Teflon® (Block Valves only) I – Integral (body material)
D – Delrin®
E – PEEK
K – PCTFE

Body Material
C – CS, A1052 M – Monel®
S – SS, A479-316

Process Connections
43 – 1/2-inch FNPT
AT4 – Integral Single Ferrule tube fittings ATD4 – Integral Double Ferrule tube fittings
– 4AT 1/2-inch, – 4ATD 1/2-inch,
316 SS Ferrule and Nut 316 SS Ferrule and Nut

Options

AL – Arctic Lubricant (low temperature service -70°F) - not SSC5 – 316 Flange Bolt (B8M) - maximum pressure rating 4500 psi
available for CS valves [310 barg]
AM – AGCO Mount Kit for 2-inch pipe stand (page 146) SG – (Sour Gas) meets the requirements of NACE MR0175/ISO
BC – Accessory bracket for mounting conduit with AGCO Mount 15156-3 Corrigendum 2 for Chloride conditions ≤ 50 mg/l
[ppm]) and NACE MR0103-2005
BP – Accessory bracket for mounting purge meters with AGCO
Mount SG3 – (Sour Gas) meets the requirements of NACE MR0175/ISO
15156-3 Corrigendum 2 for Chloride conditions > 50 mg/l
CL – Cleaned for chlorine service [ppm])
HD – Hydrostatic testing (100 percent) (MSS SP-61) EL( ) – Installed street elbows in static test ports (M65T and M65A
OC – Cleaned for oxygen service only) - Elbows provided with 1/4-inch NPT Plugs
R3V – Add for use with Rosemount® Model 3051C (SS 18-8 EL1 – Elbow facing bottom of manifold
Bolts) EL2 – Elbow facing outlet of manifold
SSA5 – SS Flange Bolt (grade 18-8) - maximum pressure rating EL3 – Elbow facing top of manifold
4500 psi [310 barg]
SP – Special Requirements - please specify
SSB – 316 SS Flange Bolt (B8M Class 2) - will provide full
pressure rating

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

138
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Natural Gas Manifolds – M63A, M65T and M65A

5-Valve Manifolds

M63A

M65T

M65A

Product Overview Features and Benefits

3/8-inch [9.5 mm] Orifice
• The valves are identical for all three
This product series parallels the M6A series manifold configurations:
but with the larger 3/8-inch [9.5 mm] M63A - pipe x pipe
orifices. The series was developed to M65T - pipe x flange
answer two needs: 1) a larger valve orifice M65A - flange x flange
to assure positive line drainage where
• As with the M6A series, the M63A is
wet gas and hydrates are a problem;
generally mounted and supported by
and 2) to match the flange tap drilling of
3/8-inch [9.5 mm] reducing signal variance
the 3/8-inch or 1/2-inch tubing lines for
orifice meter applications.
when pulsating flow is experienced and the
manifold (M65A) is mounted as close to the • The M65T and M65A may be pipe
flange outlet as practical. stand mounted with the appropriate
AGCO Mount Kit to support a differential
transmitter. Advantages of AGCO Mount
are: that installation may be made prior
to availability of the transmitter; and,
easier and faster removal of transmitter
for maintenance since transmitter is
supported only by the manifold.

• Soft seats are available in a variety of

materials to suit sweet or sour gas.

• The seats are field replaceable

without removing the manifold.

• Bonnet assemblies have blowout-

proof stems that seal and isolate the
packing when the valve is fully open.

• Packing is below the stem threads for

corrosion protection.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

139
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Natural Gas Manifolds – M63A Specifications

M63A Dimensions, inches [mm]

1/2 - 14 NPT
3.88 [98.6]
Instrument Connection
2 Places
1/ 4
- 18 NPT
Static (Test) Ports
2 Places

4.00
[101.6]

1.44 [36.6]

Block/Isolate
1/2
- 14 NPT 2.12
[53.8] Valve
Process Connection
2 Places
A Max. Open
Vent Valve

Equalize Valve

3.35 1.50 [38.1]

[85.1] 0.75 [19.1]
Max.
Open

1/ 4
- 18 NPT Port
Vent Connection

M63A Dimensions, inches [mm]

Instrument
Packing A
Teflon® 11.90 [302.3] Static Static
(Test) (Test)
O-ring 11.36 [288.5] Equalize Equalize
Block/ Vent Block/
Isolate Isolate

Notes
1. Approximate valve weight: 8.0 lb [3.6 kg]. Process
0.375-inch [9.5 mm] diameter orifice.
Valve Cv 3.0 maximum.
2. Bottom static (test) connections available.
See options, page 145.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

140
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Natural Gas Manifolds – M65A Specifications

Dimensions, inches [mm]

1/4 - 18 NPT Static

(2 places) (optional)
3.88 [98.6] Instrument 1.62
Connections [41.1]
0.88 [22.4]

1/4 - 18 NPT
Equalize
Static (Test) Ports Block/Isolate
Valves
2 Places Valve

3.80
[96.5]

Vent
Flanged Valve
2.12
Process [53.8] 2.65 [67.3]
Connections Max. Open
1/4 - 18 NPT
A Max. Open
Vent Connection

Dimensions, inches [mm] Notes

Packing A 1. Approximate valve weight: 7.6 lb [3.4 kg].
0.375-inch [9.5 mm] diameter orifice.
Teflon® 11.90 [302.3] Valve Cv 3.0 maximum.
O-ring 11.36 [288.5] 2. Bottom static pressure connections
1/4-inch - 18 NPT available (see options

page 145).
3. PCTFE (Polychlorotrifluoroethylene) is the
Instrument
exact equivalent of Kel-F®.
4. M65T Installation Kit consists of 4 bolts
Static Static 7/16-inch-20 x 1-inch A193-B7, 4 washers,
(Test) (Test)
Equalize Equalize and 2 Teflon® gaskets.

Block/ Vent Block/

Isolate Isolate

Process

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

141
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Natural Gas Manifolds – M65T Specifications

M65T Dimensions, inches [mm]

3.88 [98.6] 1.62

[41.1]
Instrument
Connections 0.88 [22.4]

1/4 - 18 NPT Static

Pressure Connection Equalize
Valves
2 Places Block/Isolate
Valve

4.00
[101.6]

Vent
Valves
1/2- 14 NPT 2.12
Process Connection [53.8] 2.65 [67.3]
2 Places Max. Open
1/4 - 18 NPT
A Max. Open
Vent Connection

Instrument
M65T Dimensions, inches [mm]
Packing A
Static Static
Teflon® 11.90 [302.3] (Test) (Test)
Equalize Equalize
O-ring 11.36 [288.5] Block/ Block/
Vent
Isolate Isolate

Notes
Process
1. Approximate valve weight: 7.6 lb [3.4 kg].
0.375-inch [9.5 mm] diameter orifice.
Valve Cv 3.0 maximum.
2. Bottom static pressure connections
1/4-inch - 18 NPT available (see options

page 145).
3. M65T Installation Kit consists of 4 bolts
7/16-inch-20 x 1-inch A193-B7, 4 washers,

and 2 Teflon® gaskets.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

142
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Natural Gas Manifolds – M63A, M65T and M65A

Specifications
Pressure and Temperature Ratings
Packing Seat Material Seat Standard Bolting SS Bolting
Delrin®
Teflon® or O-ring Soft 3000 psig @ 200°F [207 barg @ 93°C] 3000 psig @ 200°F [207 barg @ 93°C]
PCTFE5
6000 psig @ 200°F [414 barg @ 93°C] 4500 psig @ 100°F [310 barg @ 38°C]
Teflon® or O-ring PEEK Soft
3000 psig @ 300°F [207 barg @ 149°C] 3000 psig @ 300°F [207 barg @ 149°C]
1000 psig @ 150°F [ 69 barg @ 66°C] 1000 psig @ 150°F [ 69 barg @ 66°C]
Teflon® Teflon® Soft
200 psig @ 500°F [ 14 barg @ 260°C] 200 psig @ 500°F [ 14 barg @ 260°C]
Teflon® SS Metal 1500 psig @ 500°F [103 barg @ 260°C] 1500 psig @ 500°F [103 barg @ 260°C]

Notes Standard Materials

1. CS parts are zinc cobalt plated. Valve Seat Body Bonnet Stem Flow Washer
2. M63A body material is A108
CS1 Soft A1052 A108 A582-303 316
3. M63A body material is A240-316.
SS Soft A479-3163 A479-316 A276-316 316
4. SG (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum 2 SG4 Soft A479-316 A479-316 Monel® R405 316
(for Chloride conditions ≤ 50 mg/l [ppm]) and SG36 Soft Hastelloy® C-276 Hastelloy® C-276 Hastelloy® C-276 Hastelloy®
NACE MR0103-2005.
5. PCTFE (Polychlorotrifluoroethylene) is the
exact equivalent of Kel-F®.
6. SG3 (Sour Gas) meets the requirements of
NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions > 50 mg/l [ppm]).

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

143
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Natural Gas Manifolds – M63A1, M65T and M65A

Specifications
Pressure vs. Temperature – Standard Bolting1 Notes
1. Use left Pressure Temperature Ratings
column for M63A.

Delrin®/PCTFE2 2. PCTFE (Polychlorotrifluoroethylene) is the

6000 PEEK exact equivalent of Kel-F®.
[414]
Teflon® 3. 316 SS bolts lower pressure ratings to a
maximum of 4500 psi [310 barg]. Consult
5000 Metal Seat
[345] Denotes factory for full rating with 316 SS bolts.
intersecting data
Pressure psig [barg]

4000
[276]

3000
[207]

2000
[138]
1500
[103] 1000
[69]
200
[14] 0

0 100 200 300 400 500

[-18] [38] 150 [93] [149] [204] [260]
[66]
Temperature °F [°C]

Pressure vs. Temperature – SS Bolting3

Delrin®/PCTFE2
6000 PEEK
[414]
Teflon®
5000 Metal Seat
[345] Denotes
4500 intersecting data
Pressure psig [barg]

[310]
4000
[276]

3000
[207]

2000
[138]
1500
[103]
1000
[69]
200
[14]
0

0 100 200 300 400 500

[-18] [38] 150 [93] [149] [204] [260]
[66]
Temperature °F [°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

144
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Natural Gas Manifolds – M63A, M65T and M65A

Specifications
Notes Ordering Information
1. CS is zinc cobalt plated to resist corrosion.
M6A V D S –4 – SG
2. Equalizer valve is ball seated. Ball material is
316 SS for SS body, 17-4 PH for CS body.
3. M63A is A108-1018.
Valve Type
4. 316 SS bolts lower pressure ratings to a
maximum of 4500 psi [310 barg]. Consult 3/8-inch
[9.5 mm] orifice
factory for full rating with 316 SS bolts. M63A – Pipe x Pipe
M65T – Pipe x Flange
M65A – Flange x Flange

Packing
V – Teflon®
R – O-ring

Seat (cone)
Soft (Block valves only) Hard2
V – Teflon® S – SS, A479-316
D – Delrin® M – Monel®
E – PEEK
K – PCTFE

Body Material
C – CS1, A1053
S – SS, A479-316
J – Hastelloy®

Process Connections
M63A and M65T only
4 – 1/2-inch FNPT

Options Code
AL – Arctic Lubricant (low temperature SSC4 – 316 Flange Bolt (B8M) - maximum
service -70°F) - not available for pressure rating 4500 psi [310 barg]
CS valves SG – (Sour Gas) meets the requirements
AM – AGCO Mount Kit for 2-inch pipe of NACE MR0175/ISO 15156-3
stand (page 146) Corrigendum 2 for Chloride
BC – Accessory bracket for mounting conditions ≤ 50 mg/l [ppm]) and
conduit with AGCO Mount NACE MR0103-2005

BP – Accessory bracket for mounting SG3 – (Sour Gas) meets the requirements
purge meters with AGCO Mount of NACE MR0175/ISO 15156-3
Corrigendum 2 for Chloride
CL – Cleaned for chlorine service conditions > 50 mg/l [ppm])
HD – Hydrostatic testing (100 percent) EL( ) – Installed street elbows in static test
(MSS SP-61) ports (M65T and M65A only) -
OC – Cleaned for oxygen service Elbows provided with 1/4-inch NPT
Plugs
R3V – Add for use with Rosemount®
Model 3051C (SS 18-8 Bolts) EL1 – Elbow facing bottom of manifold
SSA4 – SS Flange Bolt (grade 18-8) - EL2 – Elbow facing outlet of manifold
maximum pressure rating 4500 psi EL3 – Elbow facing top of manifold
[310 barg]
SP – Special Requirements - please
SSB – 316 SS Flange Bolt (B8M Class 2) - specify
will provide full pressure rating

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

145
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Natural Gas Manifolds – AGCO Mount Kits

Natural Gas Manifolds

Manifold Kit Material Description
Style Part Number
M6A/M12 02.1639.678 CS1 Standard Kit
M6T 06.0472.003 CS1 Standard Kit
M6T 06.0472.004 SS Standard Kit
M6TA 06.1375.003 CS1 Standard Kit
M6TA 06.1375.004 SS Standard Kit
M65A 06.1375.003 CS1 Standard Kit
M65A 06.1375.004 SS Standard Kit
M63A — — Supported by tubing

Notes
1. Zinc cobalt plated.
2. Does not include nipples.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

146
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Natural Gas Manifolds – M19 Meter Manifold

Product Overview
The M19 Meter Manifold is a three- or five-
valve manifold specifically designed for
use with orifice meters. It is designed for
repetitive bubble-tight closure, safety,
and a long trouble-free life with easy
maintenance. Field replaceable soft seats
give premium tightness at closure, even in
dirty service. The straight-thru rising plug
design provides good regulation and is
roddable for easy cleaning.

The five-valve assembly is indicated for

orifice meters remote from the orifice flange
union.

The three-valve manifold is used when the

orifice meter is mounted adjacent to the
orifice flange and the two process block Features and Benefits • Straight-thru flow path. High flow
valves provide convenient closure. • The M19 was designed to overcome capacity and rodding capabilities.
the leaking problems experienced with
• Body-to-bonnet seal. The seal is
inexpensive valves and 1/4-inch pipe-
metal-to-metal in constant compression
fitting assemblies made-up under
below the bonnet threads. This prevents
varying conditions.
bonnet thread corrosion, eliminates
• Replaceable soft seats allow possible tensile breakage of bonnet,
replacement of the seat insert without and gives a reliable seal point.
removing the valve from the line.
• Rolled threads. Stem and male NPT
Operates in dirty service with repetitive
threads are rolled rather than cut, giving
bubble-tight shutoff.
extra thread strength.
• Adjustable Teflon® packing is easily
• Chrome plating of 316 SS stem.
changed by loosening the jam nut,
Hard chrome plating of stem threads
tightening the bushing slightly, then
prevents galling or freeze-up, which may
retightening the jam nut. This feature
occur when similar metals mate. CS
reduces downtime in packing
valves are supplied with SS stems.
replacement, and provides for long valve
life. • Safety back seating prevents stem
blowout or accidental removal while in
• The O-ring packed design for natural
operation.
gas is self-adjusting.
• Dust cover protects stem from
• Packing below threads prevents
lubricant contamination.
lubricant washout, thread corrosion, and
keeps solids from entering thread area
causing galling. This also prevents
process contamination.

• Mirror stem finish is burnished to a 16

RMS finish in the packing area. This
ensures smooth operation and
increases the life of the packing.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

147
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Natural Gas Manifolds – M19 Specifications

Dimensions, inches [mm] Note

1.25 [31.8] Sq. Stk. 0.62 [15.7] 1. Approximate valve weight: 5.5 lb [2.4 kg].
8.0 lb [3.6 kg] with optional block valves.
10.0 [254.0]
0.187-inch [4.8 mm] diameter orifice.
5.0 [127.0] Valve Cv 0.83 maximum.

Block/Isolate Valve Vent Valve Block/Isolate Valve

(optional) (optional)

Equalize Valves

3.85
[97.8]
Max.
Open

Optional Teflon® Packed

3.70 [94.0]
(O-ring, standard)
7.40 [188.0]

8.74 [222.0]
1/4 - 18 FNPT 7 Places

3-Valve 5-Valve

Instrument Instrument

Static Static Static Stat

(Test) (Test (Test) (Tes
Equalize Equalize Equalize Equalize
Block/ Block/
Isolate Isolate

Vent Vent
Process
Process

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

148
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Natural Gas Manifolds – M19 Specifications

Notes Standard Materials

1. PCTFE (Polychlorotrifluoroethylene is exact Valve Body Bonnet Stem Packing Seat1
equivalent of Kel-F®), PEEK and Teflon® are
available. Viton® O-ring with
CS2 A108 CS A108 CS A581-303 SS Delrin®
Teflon® backup ring
2. CS is zinc plated to prevent corrosion.
3. SG (Sour Gas) meets the requirements of Viton® O-ring with
SS A479-316 SS A476-316 SS A276-316 SS Delrin®
NACE MR0175/ISO 15156-3 Corrigendum 2 Teflon® backup ring
(for Chloride conditions ≤ 50 mg/l [ppm]) and
SG3 A479-316 SS A479-316 SS Monel® R405 Teflon® Delrin®
NACE MR0103-2005.

Pressure and Temperature Ratings

Seat Ratings
Delrin® and PCTFE1 6000 psig @ 200°F [414 barg @ 93°C]
6000 psig @ 200°F [414 barg @ 93°C]
PEEK
2000 psig @ 400°F [138 barg @ 204°C]
1000 psig @ 150°F [69 barg @ 66°C]
Teflon®
200 psig @ 500°F [14 barg @ 260°C]

Pressure vs. Temperature

Teflon®
6000 PEEK
[414] Delrin®
PCTFE
5000 Denotes
[345] intersecting
data
Pressure psig [barg]

4000
[276]

3000
[207]

2000
[138]

1000
[69]
200
[14] 0

0 100 200 300 400 500

150
[-18] [38] [93] [149] [204] [260]
[66]

Temperature °F [°C]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

149
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Natural Gas Manifolds – M19 Specifications

Ordering Information
M19 C T – H1 – SG

Materials of Construction
C – CS, A108
S – SS, A479-316

Configuration
T – 3-Valve
F – 5-Valve

Vent Valve Type

H1
H5

Options
AL – Arctic Lubricant (low temperature service -70°F) - not available for CS valves
CL – Cleaned for chlorine service
HD – Hydrostatic testing (100 percent)
MS – Monel® Stem
OC – Cleaned for oxygen service
PHB – Phenolic Black Handle
SG – (Sour Gas) meets the requirements of NACE MR0175/ISO 15156-3 Corrigendum 2
(for Chloride conditions ≤ 50 mg/l [ppm]) and NACE MR0103-2005 (SS valves only)
SP – Special Requirements - please specify

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

150
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Distribution Manifolds – ADME

Product Overview Features and Benefits

Designed to distribute air for panel and • Compact design enables lower
cabinet instrumentation. Can easily be wall installation costs and fewer potential
or pipe stand mounted. leak points.
The ADME is manufactured from an • Choice of body materials suitable for
extruded section in either CS or SS and is a range of process applications.
available with either ball valves or H5-type
miniature needle valves with soft or hard • Choice of valve types; ball valves or
seats. These valves are suitable for miniature needle valves with soft or hard
pressures to 725 psig [50 barg], 3000 psig seats can be specified.
[207 barg] and 6000 psig [414 barg].
• Secure mounting suitable for panels,
The ADME manifold body has 3/4-inch NPT walls and 2-inch [50 mm] NB pipe stand.
end connections and 1/4-inch NPT side
• Threaded or flanged inlet available
outlets. The manifold inlet can be supplied
with 3/4-inch threaded or flanged inlet, in
flanged in sizes up to 1-inch NB class 2500
sizes up to 1-inch NB class 2500 lb.
lb. The manifold end outlet is fitted with a
3/4-inch NPT adaptor and drain valve as

standard. Available from 2 x 2 to 2 x 10

outlets, the standard manifolds have equally
spaced outlets on both sides of the body;
the outlet ports may be positioned to meet
specific requirements.

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

151
Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Distribution Manifolds – ADME Specifications

ADME.8.S.BVS-22 Dimensions, inches [mm] – Ball Valve Type

3 x 2.75 Pitches [3 x 70 Pitches]

1.20 [30]

1/4
NPT
Outlet
ø 0.26 [6.6]
Mounting Holes
4 Places

0.90 [23]
4.72
[120]

8.66
[220]
3/4 NPT
Inlet

10.62 [270]
1.20 [30]
11.49 [292]
15.82 [402] O/A Dimension ‘B’

ADME.8.S.H5VIS-22 Dimensions, inches [mm] – Needle Valve Type

3 x 2.75 Pitches [3 x 70 Pitches]

1/4 NPT
1.20 [30]
Outlet ø 0.26 [6.6]
Mounting Holes
4 Places
1.67 [42.5]

4.72
[120]

3/4 NPT
Inlet
10.62 [270]
2.60 [66] 11.80 [300]
Max.
Open 13.85 [352] O/A Dimension ‘A’

Overall Dimensions – inches [mm]

Number 4 6 8 10 12 14 16 18 20
of Outlets (2 x 2) (2 x 3) (2 x 4) (2 x 5) (2 x 6) (2 x 7) (2 x 8) (2 x 9) (2 x 10)
8.35 11.10 13.85 16.61 19.37 22.12 24.88 27.64 30.39
A (H5 Valves)
[212] [282] [352] [422] [492] [562] [632] [702] [772]
10.31 13.07 15.82 18.58 21.38 24.09 26.85 29.60 32.36
B (Ball Valves)
[262] [382] [402] [472] [542] [612] [682] [752] [822]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

152
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Distribution Manifolds – ADME Specifications

Pressure Rating – Valves

Valve Pressure Rating Model Number
Type psig [barg] SS CS
Ball Valve 725 psig [50 barg] BVS-22 —
H5-Teflon®, Hard 6000 psig [414 barg] H5VIS-22 H5VIC-22
H5-Teflon®, Soft 3000 psig [207 barg] H5VKS-22 H5VKC-22

Technical Specifications Standard Connections

Standard Materials Threaded NPT to ANSI/ASME B1.20.1.
CS - A108 Flanged Inlet connections are available
SS - A479 316 SS flanged up to 1-inch NB class
2500 lb.
Pressure Rating
6000 psig [414 barg] maximum
= H5 hard seat.

3000 psig [207 barg] maximum

= H5 soft seat.

725 psig [50 barg] maximum

= ball valve.

6000 psig [414 barg] maximum

= special high pressure ball valve.

Ordering Information

ADME 6 S H5VIS-22 – PB

Number of Outlets
4, 6, 8, 10, 12, 14, 16, 18, 20

Material
C – CS
S – SS

Valves - Sold as assembled only

H5VIS-22 – Teflon® packed, SS, Metal Seat
H5VKS-22 – Teflon® packed, SS, PCTFE Seat
BVS-22 – Ball Valve, SS

Options Code
FI – Flanged Inset - specify size and rating
PB – 2-inch [50 mm] Pipe Bracket
SP – Special Requirements - please specify

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

153
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Manifold Accessories

Bonnet Lock (BL) (Patented)

• Anderson Greenwood’s Bonnet Lock

prevents accidental loosening of the
bonnet-to-body seal.

• A high-strength, short bonnet pin aligns

a hex collar over the bonnet. A standard
panel nut (GRAFOIL® packed) then
locks the collar against the valve.

• Tests indicate the minimum torque

required to break the collar loose is
greater than the torque required to twist
off handle.

• Available on GRAFOIL® packed GRAFOIL® Packed Bonnet Lock1

bonnets.

Note
1. Standard on power plant manifolds.

Seat Resurfacing Tool

Over time the seating surface of the body Model Number/ Description
orifice may corrode or be damaged. The Part Number
seat resurfacing tool will re-machine this
Seat Resurfacing Tool for
surface and allow the valve to once again 3/16-inch
SRT-1 [4.8 mm] diameter
deliver bubble-tight shutoff. Available for
02.2543.001 orifice, H7 style
H7 style, metal seated valves only.
metal seated valves

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

154
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Manifold Accessories

Rod-Out Device
Dimensions, inches [mm]
The Rod-Out is a device to rod-through
passages that have become restricted. It is
designed to be used while the valve is not
under pressure. It can be left in place while
the valve is under pressure. The centerless
ground rod has a hardened cutting end
larger than the shaft to prevent ‘blowout’
through the adjustable packing gland.
The Rod-Out is available with a 3/16-inch
[4.8 mm] or 3/8-inch [9.5 mm] diameter rod.

B Max. C Max. Reach

Clearance

Rod-Out Device with M5AK Gauge Valve

Notes Rod-Out Device Specifications1, inches [mm]

1. Maximum recommended usage: Model Max. Dia.2 Rod3 Gland4 Inlet5 Dimensions3
500 psig @ 100°F [34 barg @ 38°C]. Number Bore Connection A B C
100 psig @ 500°F [7 barg @ 260°C].
2. Rod tip for 3/8-inch [9.5 mm] bore is 18.1 17.8 15.9
RTV3C-N47 3/8" [9.5] A108 CS7 A108 CS7 1/2" NPT
0.312-inch [7.9 mm] diameter. [460] [452] [404]
Rod tip for 3/16-inch [4.8 mm] bore is
18.1 17.8 15.9
0.141-inch [3.6 mm] diameter. RTV3S-N4 3/8" [9.5] 316 SS 316 SS 1/2" NPT
[460] [452] [404]
3. For special rod lengths, materials or
connections, consult factory. 18.1 17.8 15.9
RTV3M-N4 3/8" [9.5] Monel® R405 Monel® R405 1/2" NPT
[460] [452] [404]
4. Teflon® packing.
5. 2-bolt flanged connection is available. 12.1 11.8 10.1
RTV1C-N47 3/16" [4.8] 4130 SS A108 CS7 1/2" NPT
3/8-inch [307] [300] [256]
6. [9.5 mm] diameter device is
1.0 lb [0.45 kg] each. 12.1 11.8 10.1
RTV1S-N4 3/16" [4.8] 316 SS 316 SS 1/2" NPT
3/16-inch [4.8 mm] diameter device is
[307] [300] [256]
0.5 lb [0.23 kg] each.
12.1 11.8 10.1
7. CS is zinc cobalt plated to resist corrosion. RTV1M-N4 3/16" [4.8] Monel® R400 Monel® R405 1/2" NPT
[307] [300] [256]

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

155
 Anderson Greenwood Manifolds Catalog
Flow, Static Pressure, and Liquid Level Manifolds

Code Requirements

ASME B31.1 or B31.3 conditions. If blowdown valves are used

Valve design criteria is described in Section between the root valve and the manifold,
107. Important considerations from this then the manifold design temperature
section are as follows: rating need only be 100°F [38°C]. However,
in such cases, the pressure rating must be
1. Valves require specific pressure and the lesser of 1.5 times the mainline design
temperature ratings such as those found pressure or the rating of the blowdown
in ASME B16.34. valve. The utilization of commercial grade
2. Material requirements must conform to manifolds (without the manufacturer's
listed ASTM specifications. certification to ASME B31.1 or if stamped
WOG) which meet only the pressure ratings
3. As a minimum, the valve body should be are prohibited unless all other code
marked or tagged in accordance with requirements have been met (such as Table
specification MSS SP-25. 126.1 of ASME B31.1 for materials,
compliance to testing requirements, etc).
4. Valve design may include screwed,
union, or OS&Y bonnets. The final section of the Code, Section I,
137, specifies the criteria for testing. All
The requirements for instrument, control,
instrument manifold valves are required
and sampling systems are found in Section
to be hydrostatically tested by the
122. Instrument piping, as defined by this
manufacturer to certify compliance with the
section, includes that piping from the
Code. Hydrostatic testing is performed, as a
instrument root valve (or first valve off the
minimum, in accordance with MSS SP-61.
main piping line) up to, but not including,
This testing includes the body cavity
the instrument, transmitter, or any other
hydrostatic test at 1.5 times the design
measuring and sensing device.
pressure rating and seat leakage test(s) at
The instrument valve or manifold must be 1.1 times the maximum pressure rating.
designed to withstand full system design
In Table 126.1 of ASME B31.1 and in
pressure at the design temperature or the
Appendix E of ASME B31.3, Instrument
corresponding saturation temperature if the
Valves and Manifolds qualified to
service is steam. Even though the
MSS SP-105 are acceptable within the
instrument will never be subjected to the
specified pressure/temperature rating
system temperature, manifold design
requires this protection in the event that the
root valve should fail under operating

Copyright © 2008 Tyco Flow Control. All rights reserved. AGIMC-0344

156
 ANDERSON GREENWOOD
INSTRUMENTATION PRODUCTS
P.O. Box 944, Stafford
Texas 77497, USA
Telephone: 1-281-274-4400
Fax: 1-281-240-1800

Sharp Street, Walkden

Worsley
Manchester, M28 3NA
United Kingdom
Telephone: 44-161-790-7741
Fax: 44-161-703-1859

www.aginstrumentation.com
www.tycoflowcontrol.com

Tyco Flow Control (TFC) provides the information herein in good faith but makes no representation as to its comprehensiveness or accuracy. This data sheet is intended only as a guide R Q UA L I T
TE
IS

to TFC products and services. Individuals using this data sheet must exercise their independent judgment in evaluating product selection and determining product appropriateness for
D 'S R E G

AS

their particular purpose and system requirements. TFC MAKES NO REPRESENTATIONS OR WARRANTIES, EITHER EXPRESS OR IMPLIED, INCLUDING WITHOUT LIMITATION ANY
SUR ANC

WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE WITH RESPECT TO THE INFORMATION SET FORTH HEREIN OR THE PRODUCT(S) TO
WHICH THE INFORMATION REFERS. ACCORDINGLY, TFC WILL NOT BE RESPONSIBLE FOR DAMAGES (OF ANY KIND OR NATURE, INCLUDING INCIDENTAL, INDIRECT, OR
OY

E
LL

CONSEQUENTIAL DAMAGES) RESULTING FROM THE USE OF OR RELIANCE UPON THIS INFORMATION. Patents and Patents Pending in the U.S. and foreign countries. Tyco
reserves the right to change product designs and specifications without notice. ISO
9001

AGI-Catalog-US-0801 Printed in USA / 5M / ©2008