Product Information Printing Auxiliaries
Sera® Print C-DF
Cationic Dye Fixing Agent to improve wet fastness of reactive prints on cellulosic
Fiber.
Function Cationic Dye Fixing Agent especially for improving wet fastness of
Reactive and Direct dye prints on cellulosic fiber.
Properties - improves water severe, perspiration and hot pressing fastness.
- Improves fastness to washing significantly.
- contains no formaldehyde & zinc ( suitable for eco label) .
Chemical Characteristic Cationic Polymer in solution .
Technical Data Appearance Yellowish brown liquid
Polymer Charge Cationic
pH 5–7
Specific Gravity ± 1.15
Viscosity 5 - 30 cps
Compatibility Compatible with non-ionic & cationic products
0
Freezing Point 5C
Shelf Life In sealed drum it has a self life of 12
months. Protect from heat & sunlight.
®
Sera Print C-DF Page 1 of 2
®
Application Sera Print C-DF can be diluted in all proportion by pouring cold water .
®
The amount of Sera Print C-DF depends on type of dye and desired
depth.
Padding Process
0 0
The padding process is carried out at room temperature 20 C to 30 C
®
through solution of Sera Print C-DF. The pH of padding bath should
be kept between 5 - 6 by adding acetic acid.
3 – 7 gpl for pale to medium shades with 70% pick up.
7 – 15 gpl for very dark shades with 70% pick up.
Dry the fabric after padding.
Exhaust Process
®
With the following concentration of Sera Print C-DF, the goods must
0
be treated for 20 minutes at 40 C at pH 6 to 6.5
0.5 – 1% for tints to medium shades
1 – 1.5% for very dark shades
Rinse in cold water and dry the fabric.
®
Sera Print C-DF has good stability to steaming. It has very slight
dye-specific shade change and thereby good reproducibility. It protects
the prints produced with reactive dyes against hydrolysis and
thermocraking therefore does not influence the fastness properties
after heat treatment and storage under adverse conditions.
DyStar India Private Limited, This information and our technical advice-whether verbal, in
writing or by of trials – are given in good faith but without
Plot No. 3002 / A, warranty, and this also applies where proprietary rights of
third parties are involved. Our advice does not release you
GIDC, Ankleshwar, from the obligation to check its validity and to test our product
as to their suitability for intended process and uses. The
Gujarat – 393002 application, use and processing of our products and the products
manufactured by you on the basis of our technical advice are
Phone: +91 - 2646 – 221015 / 16 / 17 / 18 beyond our control and, therefore, entirely your own responsibility.
Our products are sold in accordance with our General Conditions
DYSTARIndia@DyStar.com of sale and Delivery.
www.DyStar.com
®
Sera Print C-DF Page 2 of 2