0% found this document useful (0 votes)
17 views2 pages

Directional, Dual Tone Industrial Air Horn: Model

The document describes an industrial air horn with the following key details: - It has a dual tone with frequencies of 370 Hz and 622 Hz and can be heard up to 3.5 kilometers away. - It is ideal for noisy industrial environments and has an energy efficient design that does not require tuning. - The air horn operates on air, nitrogen, CO2, or other gases between 3-10 bar of pressure and between -40 to 85 degrees Celsius.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
0% found this document useful (0 votes)
17 views2 pages

Directional, Dual Tone Industrial Air Horn: Model

The document describes an industrial air horn with the following key details: - It has a dual tone with frequencies of 370 Hz and 622 Hz and can be heard up to 3.5 kilometers away. - It is ideal for noisy industrial environments and has an energy efficient design that does not require tuning. - The air horn operates on air, nitrogen, CO2, or other gases between 3-10 bar of pressure and between -40 to 85 degrees Celsius.
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

MODEL

K-25

Directional, Dual Tone


Industrial Air Horn
*EFFECTIVE OUTDOOR COVERAGE OF UP TO 3.5 KILOMETERS

• Dual tone, 370 Hz / 622 Hz fundamental frequency, Operating Medium: Air, nitrogen, CO2, 1/2” NPT inlet
engineered with off chords to grasp attention in order Control: Manual, solenoid or combination valve
to enhance warning effectiveness
SPL (Loudness) on Total: 141 ± 1 dBA @ 1 meter
• Ideal for noisy industrial areas Air Consumption: 22.6 L/Sec [48 SCFM] @ 7 bar [100 PSIG]
• Energy efficient with hermetically sealed diaphragm
assembly Audibility: 3.5 km on still air
Fundamental Frequency: 370 Hz / 620 Hz ± 20 Hz
• Will operate on a wide range of pressures without
Tone (Musical Note): D5 sharp / F4 sharp
requiring tuning or field adjustment for years of trou-
ble-free service Operating Pressure: 3 – 10 bar [45 – 150 PSI]
• Constructed of high strength cast aluminum with Operating Temperature: -40ºC to +85ºC [-40ºF to +185ºF]
stainless steel fasteners Finish: Painted red
∗ Signal will produce a sound pressure level of approximately 70 dB Degree of Protection: IP 54
@ 4 km in calm, cool conditions without topographical interference.
Signal strength at distance can vary dramatically depending on Basic Dimension: 311x337x178mm [12.25x13.25x7”]
environmental and geographical conditions. Please consult factory Net Weight: 5.25 kg [11.5 lbs]
for more detailed information.

Kahlenberg Industries, Inc.


1700 12th Street, P.O. Box 358
Two Rivers, Wisconsin, 54241
Phone: (920) 793-4507 / Fax: (920) 793-1346
Website: www.kahlenberg.com Email: info@kahlenberg.com

You might also like