नतीजे की परवाह ककये किना मेहनत कर |
एक किन तेरी मेहनत ही नतीजे िनाएगी ||
LIVE ESE PRELIMNS PYQs 14
SURVEYING
PLANE TABLE SURVEY
| by AK Goyal Sir
ANKIT GOYAL
M.Tech, Transportation Engg
Working Exp. In Designing
GATE Ranker 4 Times
Qualified SSC JE, RRB JE & APPSC AE
5 Years of Teaching Exp.
JOIN US
ON TELEGRAM
https://t.me/ CiviliED
Scan QR Code
Surveying ESE Past Year Questions
It is required to produce a small-scale map of an area in a
Q. 1 magnetic zone by directly plotting and checking the work in the
ESE 1996 field itself. Which one of the following surveys will be most
appropriate for this purpose?
(a) Chain (c) Plane Table
(b) Theodolite (d) Compass
Surveying ESE Past Year Questions
Q. 2 For locating an inaccessible point with the help of only a Plane
ESE 1997 table, one should use
(a) traversing (c) radiation
(b) resection (d) intersection
Surveying ESE Past Year Questions
Q. 3 The method of plane tabling commonly used for establishing
ESE 1998
the instrument station is method of
(a) radiation (c) resection
(b) intersection (d) traversing
Surveying ESE Past Year Questions
Q. 4 The three-point problem in hydrographic surveying considers the
ESE 1999 data on the location of three shore signals A, B and C and the
angles (I and subtended by AP, BP and Cy at the boat, P; and
then proceeds to plot the position of P. The problem may
become indeterminate in special cases when
(a) B and P are on opposite sides of the line AC
(b) Both B and P are on the same side of the line AC
(c) P is within the triangle ABC
(d) P is very close to the extension of one of the edges of the
triangle ABC.
Surveying ESE Past Year Questions
Q. 5 Match List I (Statement) with List II (Situation) and select the
ESE 2000 correct answer using the codes given below the lists.
List I List II
A. Accurate centering in plane table 1. Inaccessible points
surveying is necessary for
B. Exact orientation is more important than 2. Open country with
accurate centering for good intervisibility
C. The intersection method of plane table 3. Large scale maps
surveying is particularly employed for
D. Plane table survey is useful for 4. Small scale maps
5. Hilly regions
Surveying ESE Past Year Questions
Q. 6 The method of orienting a plane table with two inaccessible
ESE 2000 points is known as
(a) Intersecting (c) Back sighting
(b) Resection (d) Two-point problem
Surveying ESE Past Year Questions
Q. 7 Match List I with List II and select the correct answer:
ESE 2000 List I List II
A. Traversing 1. Rays are drawn to Locate the station on which the
table is set up
B. Resection 2. At least two rays are drawn from two different stations
to the details to be located
C. Intersection 3. Rays are drawn in the direction of details through, the
station point which the table is setup
D. Radiation 4. Rays are drawn on the map by setting up the table
over each of the stations towards the subsequent station
Surveying ESE Past Year Questions
Q. 8 The process of determining the location of the station (on the
ESE 2000 map) occupied by the plane table is called as
(a) Intersection
(b) Three-point problem
(c) Traversing
(d) Resection
Surveying ESE Past Year Questions
Q. 9 Which one of the following surveys employs alidade?
ESE 2001
(a) Contour survey
(b) Archaeological survey
(c) Plane table survey
(d) Reconnaissance survey
Surveying ESE Past Year Questions
Q. 10 Which one of the following errors is more severe in plane
ESE 2002 table surveying?
(a) Defective sighting
(b) Defective orientation
(c) Movement of board between sights
(d) Non-horizontality of board when points sighted are at
large differences of their elevation.
Surveying ESE Past Year Questions
Q. 11 Assertion (A) : The solution of a three-point problem in plane-
ESE 2002 table surveying is aided by Lehmann's rules.
Reason (R): The application of Lehmann's rules reduces the
triangle of error and is a controlled trial-and-error technique.
Surveying ESE Past Year Questions
Q. 12 Assertion (A): In plane table photogrammetry, the areas to be
ESE 2005 mapped are taken from either end of a base line.
Reason (R): The position of the detail point with reference to the
base line is obtained by intersection of rays drawn to it from each
end of the base.
Surveying ESE Past Year Questions
Q. 13 In a solution of the three-point problem in plane table
ESE 2007 surveying, the converging of error is attained through :
(a) Concyclic concept
(b) BesseI's method
(c) Triangle of error
(d) Tracing paper method
Surveying ESE Past Year Questions
Regarding plane-table survey, which of the following statements does
Q. 14 not hold?
ESE 2008
(a) All the plotting work including contouring can be done in the field
(b) It is quite suitable for small scale surveys
(c) Less number of control points are required
(d) lt can be done in all seasons
Surveying ESE Past Year Questions
Q. 15 In a plane-table survey, the process of determining the plotted position
ESE 2008 of a station occupied by the plane-table by means of sights taken
towards known points, the locations of which have already been
plotted, is known as
(a) Radiation (c) Intersection
(b) Resection (d) Traversing
Surveying ESE Past Year Questions
Q. 16 The plotting of inaccessible points in a plane-table survey can
ESE 2009 be done by the method of
(a) Interpolation (c) Intersection
(b) Radiation (d) Traversing
Surveying ESE Past Year Questions
Q. 17 In setting up the plane table at a station P, the corresponding point on the
plan was not accurately cantered above P. If the displacement of P was 50
ESE 2009 cm in a direction perpendicular to the ray. how much on the plan would be
the consequent displacement of a point from its true position if the scale
was 1 cm = 10 m?
a) 5 mm
b) 1 mm
c) 0.5 mm
d) 0.05 mm
Thank You..
If you learned something from this Session, Subscribe this
channel for upcoming Classes.
Like, Share & Comment
