Scribd
Upload
3K views1 page

Elgi Compressor: in Operator Menu

The document provides instructions for operating an Elgi compressor. Key points include: - The door should remain closed during operation and only opened for maintenance or cleaning. - Any abnormal conditions like leaks or faulty sounds should be reported to Elgi immediately. - If the display shows "Run Unload" press the Off key. - Parameters should not be changed while the system is running. - The pressure difference will be between 0.5 to 1 bar.

Uploaded by

Shreenath
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
3K views1 page

Elgi Compressor: in Operator Menu

The document provides instructions for operating an Elgi compressor. Key points include: - The door should remain closed during operation and only opened for maintenance or cleaning. - Any abnormal conditions like leaks or faulty sounds should be reported to Elgi immediately. - If the display shows "Run Unload" press the Off key. - Parameters should not be changed while the system is running. - The pressure difference will be between 0.5 to 1 bar.

Uploaded by

Shreenath
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as DOCX, PDF, TXT or read online on Scribd
You are on page 1/ 1

Elgi Compressor

Password – 4545

- Door Closed when run.


- Door Open only when maintenance or Cleaning.
- Abnormal Condition in Compressor (Leakage, Faulty Sound, etc.) inform Elgi immediately.
- When display show “Run Unload” then press Off key.
- Don’t change any Parameters while system in running condition.
- Difference in Pressure will be 0.5 bar to 1 bar

In Operator Menu
Machine pressure Unload pressure = 10 Bar
Load Pressure = 9 Bar
View: - To view Fault report with respect to date & time
Ctrl mode: - loc (Local)
Auto Restart: - Off (Strictly Prohibited to Change)
Pr (Pressure) Unit: -
Tr (Temperature) Unit: -
Service Time
Remaining hr Show for Maintenance
Load
Unload
Standby
VFD
Normal Condition
Status
ON
Auto ON

You might also like