Virtual Receiver

SG-SYSTEM III

Features That Make a

Difference:
• Patented ANI and DNIS Disaster Recovery the easy-to-use Windows™ -
reception Strategy based SG-Systems Console
• Patented Caller ID (Bellcore or software. Continually monitoring
The use of a PRI/T1 circuit greatly the automation software ensures
ETSI only)
improves disaster recovery automatic backup to a redundant
• Patented Automatic Handshake capabilities. In the event of system
Selection (AHS) port. For example, all automation
failure, a primary central monitoring links are continually being supervised
• Advanced two-way audio station can have communication
integration by a heartbeat signal. If the heartbeat
to its System III receivers routed signal is not acknowledged,
• High-security network to an alternate disaster recovery the SG-System III will display a
monitoring facility using available phone service notification indicating there has
• Fully “hot-swappable” modules provider options. This prevents any been an error and will switch to its
• Eliminates fixed-line hunt groups down time and ensures that activities backup automation connection.
can continue as normal. The CPM polls each line card to get
• Integrated scheduled receiver
line card testing consistent up-to-date information.
Depend on the Split shelf reporting allows for each
• Blocks unwanted
Sur-Gard System III CPM3 to monitor the linecards
communications
Each SG-System III delivers that are physically installed on
• Requires less physical space
complete auto-switching redundancy that rack and output the signals
• User-friendly configuration tools
to provide backup. For example, if independently to automation and
• Upgradeable “flash” memory the primary CPM stops working, the printer(s). In the event of a failure of
• Automation output over TCP/IP secondary unit automatically takes one of the CPM3’s the other CPM3
or RS-232 over all duties until the problem will automatically start monitoring all
• ULC, CSFM, NIST, CE, CNC, is resolved. The System III has a linecards and output all signals.* The
IDA, A-tick, and C-tick approved built in power supply backup. Both AHS (Automatic Handshake Table)
the primary and secondary Power stores up to 250,000 entries and can
Supplies perform load sharing so be expanded to 500,000 entries with
in the event of a failure of either the optional License. This allows the
power supply, the alternate will System III to memorize more phone
automatically take over without any numbers increasing efficiency for
user intervention. processing all alarm signals.*

All components are ‘hot swappable’: Programming changes can be

they can be quickly removed and/or easily made using the menu-driven
replaced while the system is live. 1/4 VGA display or remotely over a
network Ethernet connection using
The robust CPM with built-in Sur-Gard Systems Console Software.
diagnostic software proactively Flash technology ensures that any
identifies any issues through required software upgrades can be

Contact your Sur-Gard distributor

www.sur-gard.com | 1-800-418-7618
 conveniently made without additional hardware or firmware Specifications
changes. No system downtime required.
DIMENSIONS
* SG-CPM3ROHS with version 2.0 and higher required SG-MLRF3 19” x 3.5” x 12.24” (38 cm x 9 cm x 31.1 cm)
4U
Configure The Sur-Gard System III The NOTE: Uses standard 19” rack
Way You Need It WEIGHT
SG-MLRF3 8.2 lbs (3.7 kg)
The two 19” rugged, rack-mountable virtual receivers house Input voltage 110/220 VAC, 50/60 Hz, 2.5 A (max)
up to 24 line cards. The ‘mix and match’ feature – IP and Power consumption 25 W
PSTN line cards – deliver ‘plug and play’ flexibility. Each line Battery backup External UPS (not supplied)
Operating Environment 32 – 122 °F (0 – 50 °C) 90%, non-condensing
card delivers the configuration potential needed: up to 64
Built-in connectors - Parallel printer port
different profiles, each with up to eight different handshakes, - Serial RS-232 port COM 1: connects to
on each line card. Digital Signal Processing (DSP) increases Automation Software (used by monitoring station)
the speed, accuracy and flexibility of each line card to allow - Serial RS-232 port COM 2: connects to external
serial printer or PC to view/print events
the processing of a greater number of communication
- Ethernet: RJ45 modular jack for 10/100Base T
formats. automation output
Compatible communication Up to 120, including: 10-40 baud, 3/1, 4/2 checksum,
– The PSTN line cards – SG-DRL3, and SG-DRL3-2L – formats 3/1,4/1, 4/1 ext. 4/1 or 3/2, 4/2, Express, Acron, Adcor,
use a number of patented technologies to help (NOTE: For a complete list, Ademco Express, Ademco High Speed, Ademco Super
decrease online time, including ANI and DNIS contact Sur-Gard) Fast, BFSK, Contact ID, FBI Super Fast, ITI, Modem IIIa2,
reception, Automatic Handshake Selection (AHS) Modem II, IIA, IIB, IIE, Sescoa Super Speed, SIA 20, SIA 8,
SIA I, SIA II, SIA III, SK FSK 1, SK FSK 2, Sur-Gard 4/2, 4/3
technology and advanced two-way audio integration.
Line card capacity Up to 24 line cards (IP or PSTN) in any combination
– The IP line cards – SG-DRL3-IP – support up to Line card - PSTN (SG-DRL3-2L) - Up to 2 lines/card
512 supervised and up to 1536 total DSC IP - Up to 64 different profiles/card with up to eight
different handshakes/profile
Communicators (Ethernet or GSM). - Software upgrades via ‘flash’ download
Output ports connect to the peripherals you need, such - 256-event memory buffer/card

as printers and/or computers – and to the automation Line card - PSTN (SG-DRL3) - Up to 64 different profiles/card with up to eight
different handshakes/profile
software. With built-in redundancy for power and auto- - Software upgrades via ‘flash’ download
switching between the linked systems, performance is - 256-event memory buffer/card
assured. Line card - IP (SG-DRL3-IP) - 256-event memory buffer/card
- 128-bit AES encryption
- Anti-hack design
Ordering Information: - Compatibility with all DSC IP Alarm Communicators
Part No. Description (GPRS or Ethernet)
- UL AA High-Line Security and ULC Level 3/4/5 listed
SG-PSC3...................... Power Supply Controller
- FIPS/NIST listed
SG-DC/DC3.................. DC Voltage converter
Visual display Menu-driven 1/4 VGA display
SG-PSU3...................... Power Supply Unit
Incoming line identification ANI (to identify the calling control panel) and DNIS
SG-MLRF3.................... System III Metal Rack (to identify and store the profile (receiver type) of the
SG-SIII-INT.................... Interconnect Kit incoming calls) reception or standard Bellcore Caller ID
SG-CPM3..................... Central Processing Module for SG-System III Certification FCC Part 15 Radiated/Conducted emissions
SG-CPM3-250KAHS..... License key for expansion of AHS table by 250,000 ACTA TIA-968B (FCC Part 68) Telecom
UL/ULC Central Station Fire (UL 864/ULC-S559)
SG-DRL3-IP.................. High Density IP Line Card for SG-System III
UL/ULC Central Station Burglary Alarm Units
SG-DRL3...................... Single PSTN Phone Line Connection (UL 1610/ULC-S304)
SG-DRL3-2L................. Dual PSTN Phone Line Connection CE Compliant (ETSI ES203021-1, -2, -3), EN60950-1
SG-BP3X...................... Centronics to RJ11 EXP Safety, EN50130-4 EMI, EN61000-6-3 Class B Radiated/
SG-SIIIBASE................. System III Basic Pack Conducted Emissions)
CSFM (California State Fire Marshall) 7300-1273: 125
SG-SIIIREDUN
PN 29003624 R006

(requires SYSIIIEXP)....... System III Redundancy Pack

SG-SIIIEXP.................... System III Expansion Pack

For product information

www.sur-gard.com
© 2011 Tyco International Ltd. and its Respective Companies. All Rights Reserved.
2011-06