Scribd
Upload
63 views10 pages

Manual Ecowitt

Manuel de Temometro Ecowitt

Uploaded by

Mateo Salazar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
63 views10 pages

Manual Ecowitt

Manuel de Temometro Ecowitt

Uploaded by

Mateo Salazar
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF or read online on Scribd
You are on page 1/ 10
ecowitt USB Temperature and Humidity Data Logger Instruction Manual Model: DS-102 ecowitt -~- Contents 1. Introduction. 4.4 Package Contents. 112 Features. 2. Installation, 2.1 Insert battery. 2.2 Wall mount. 3. Button Function, 4. Program Mode. 4.4 Quick Display Mode 4.2 Setting Mode, 4.3 MAXIMIN Mode... 4:4 Sleep Mode. 4.5 Calibration Mode...m0 4.5.1 Temperature calibration 4.8.2 Humidity calibration 4.6 Logging Mode... 4.6.1 Cycle Mode... 4.6.2 Acyclic Mode...... 4.6.3 Segmented Mode. 4.7 Other Features...... 4.7.1 History Clear... 4.7.2 Memory Status... 4.7.3 Low Battery Condition... 5. Software... : 5.1 System requirements, 5.2 Installation of the Software.. 8. Specification: 7. Warranty Information... 1. Display 2. Set key 3.+key 4. key 5. USB port oS 2.MAXIMIN valve @~ jak \ +3. Humidity, o~ E vm eg CBSES. pensar = Time period con © O——— treme 3 U8 8. Low battery indicator 1. Introduction Thank you for choosing this item for your data logging requirement. Small, simple and affordable, our DS102 Data Logger can measure and record temperature and humidity data at specified intervals ranging from once every 8 seconds to once every 4 hours. It is our goal to bring you accurate, low-cost, ‘easy-to use data logger that integrate easily into the user's ‘working environment. 4.1 Package Contents + tx data fogger unit + 1xUSB cable + 1xCD ROM + 1x 3Viithium battery CR2032 + Instruction manual @ 4.2 Features Water resistance Measure and log temperature and humidity data Instant data download with PCilaptop USB interface for set-up and data download Easily re-configurable using included software Selectable logging intervals from 8 seconds to (default Sminute) Selectable temperature unit in “For °C 2 Time, date and unit synchronized your PC + Low battery indicator 4 hours 2. Installation 2.4 Insert battery 4), First use a large coin to open the battery cover at the back of the unit 2).Check the correct polarization, insert 1 x 3V (CR2032) lithium cell positive (+) pole up, into the battery ‘compartment and replace the cover. 43). When the battery is inserted, all the segments of the LCD display for about 3 seconds then enter to normal mode: Caution: Do not reverse the polarity of the battery ~ 2.2. Wall mount You can mount this tem on a wall by using screw (not Included) 3. Button Function ‘SET" BUTTON: In normal display, press “St ‘splay of time, date and logait In normal display, press “SET setting mode In normal display, press "SET Thme for 5 seconds to enter Calibration mode JET" button to alternate the ing intervals ‘ation for 2 seconds to enter and "+" buttons at the same BUTTON: + Innormal display, ‘of Max, Min and current In setting mode, press “+” button Information being set. In Max/Min made, press "+" button for 2 seconds, the Max (or Min value will be reset to current reading press "+" button to altemate the display temperature & humidity to increase the value of BUTTON: In normal display, press ~" button for 2 seconds to clear the history data In setting mode, press *-" button to decrease the value of information being set 4, Program Mode ‘There are sbe program modes: Quick Display Mode, Setting Mode, Maxihtin mode, Sleep Mode, Calibration mode and Data Logging mode. 4.4 Quick Display Mode In Normal Mode, press the “SET button to enter the Quick Display Mode as follows 1) Display time 2) Display date 3) Logging interval 42 Setting Mode {In Normal Mode, press the “SET” button for 2 seconds to enter Set Mode. The first setting will begin flashing. You can press the “SET” button again to skip any step, as defined below. 1) 12/24 hour format 2) Manual time setting (hourminutes) 3) Date seiting(DD-MMIMM-DD) 4) Calendar setting (year/monthidate) 5) Temperature display unit degree Celsius or Fahrenheit 6) Logging interval setting from 8 seconds to 4 hours (default Sminute) ‘The temperature and humidity data will be measured per 60 seconds as defauit and be stored according to the Jogging interval. If the interval is set to a number less than 60 seconds, both the temperature and humidity data will be measured and stored according to the logging interval time, a Note: In the setting mode, press’+" or ~" buttons to change or Sorolls the value. Hold the button for 2 seconds can change fast Note: The setting made will return to normal display while idle 30s, 4.3 MAXIMIN Mode In Normal mode, press "+" button to enter the MAX mode, and the Max icon and maximum records will display Press *#" button again to enter the MIN mode, and the MIN icon ‘and minimum records will display Press "+" button again to return to the Normal mode While in Max of Min mode, press "+" button for 2 seconds, the Max or Min value will be reset to current reading Note: Press “SET” button or wait 30 seconds, and the MAXIMIN Mode will return to normal mode. 4.4 Sleep Mode If LCD “AUTO OFF" function was chosen on the PC software, the device will automatically enter sleep mode if no button is pressed for 10 minutes to save battery life. Press any button to coxit sleep mode, In Sleep Mode, the unit detects temperature and humidity data ‘as Normal Mode. 8 4,5 Calibration Mode While in Normal Mode, press “SET” and "s” buttons at the same time for 5 seconds to enter Calibration Mode. The temperature vvalue will begin flashing. Press the “+” bution or *" button to increase or decrease the temperature bias to match the calibrated source. Press the "SET" key, the humiily value will begin flashing. Press the "+" button or." button to inorease oF decrease the humidity bias fo match the calibrated source. 4.5.4 Temperature calibration ‘To calibrate temperature, we recommend a mercury or red spirit (Quid) thermometer, Bimetal (dial) and other digital thermometers are not a good source and have their own margin of error. Using a local weather station in your area is also a poor source due to changes in location, timing (airport weather Stations are only updated once per hour) and possible calibration errors (many official weather stations are not property installed and calibrated) 4.5.2 Humidity calibration To calibrate humidity, you will need an accurate source, such as a sling psychrometer, 4.6 Logging Mode The logging mode to be set on the PC software. There are three types of logging mode: Cycle Mode, Acyclic ‘Mode, and Segmented Mode. ‘The default mode is Cyole Mode. 9 ~» 46.1 Cycle Mode It cycle Mode selected, the icon @ wii display In Cycle mode, when the memory Is full, the oldest data sets stored will be overwritten by the new ones entered. 4.6.2 Acyclic Mode Acyclic Mode selected, the icon @ will display In Aeyclic Mode, when the memory is full, logging stops. Logging will continue when memory is cleared via the PC software. 4.6.3 Segmented Mode ‘You can set max. 4 time periods through the setting menu on the PC software. These periods can't be overlapped. The time period must be later than the current time, It wil start logging from the set start time and stop from the set end time in a time period. ‘Time period icon © Time period 1 @ Time period 2 @ Time period 3 @ tre oioas i time period was selected, the time period icon cil rame Q) 0 wil be displayed During the logsing period, the ime period icon inside.) wi be fashing memory is full or out of the period range, the time period icon @ wilde sispiayes Note: If the logging mode is changed, the history data in data logger will be cleared automatically. Please download the data to PC before you change the logging mode, Press and hold the *" button, it will indicate "CLEAR" on the screen and the memory icon will lash, which means ready for eating history record, 4,7 Other Features 4.7.4 History Clear While in Normal Mode, press and hold the *-" button for 2 seconds, it will indicate "CLEAR' on the screen and the history data willbe cleared. 4.7.2 Memory Status ‘There are 10 bar graphs to indicate the memory store capacity ‘One bar graph is indicating 10% memory. The history data and the previous settings of the logger won't lose when battery is changed. 4.7.3 Low Battery Condition ‘When the battery valtage Is under proper operation requirement the XX symbol will show on the LCD and the battery need to be replace with now one, 5. Software 541 System requirements, ‘To install the software onto your PC, the minimum requirements are as follows: Operating System: Windows XP, Windows Vista, windows7, windows 8, windows 10 Internet Explorer 6.0 of above Processor: Pentium lll 500 MHz or above Memory: at least 128MB, 256MB recommended CD-ROM Drive Data logger and PC must be connected by USB cable ‘5.2 Installation of the Software 4, Switch on your PC and insert the CD-ROM into the CD-ROM Drive. 2. Double click “DataLogger.exe" 3. Choose the language and then install the "DataLogger.exe" ‘on your PC. 5.3 Basic Settings of the “USB Data logger” Software Alter the "Data logger” program has been started, the following main window will appear on the PC screen: 2 Data Logger 30 ineert the Data Logger into the USB port of your computer White data logger connected to PC successfully, the data will be uplosded to PC automatically and the icon of

You might also like