Preparation Before washing for the first time

Washing Individual settings Select stain

81739 München / Deutschland

Carl-Wery-Str. 34
Siemens Electrogeräte GmbH
Your washing machine Intended use Switch off the appliance

i speedPerfect*, j ecoPerfect,
Prewash,  Easy-iron,  Water Plus,

Wash once without any laundry a page 9. Load indicator/ To activate, first open the door, set the

Check the consumption values table on page 8 and the instructions on page 9.

; particularly gentle wash programme to prevent shrinkage of laundry, longer

recommended dosage programme and then load the items of laundry.

; short programme, approx. 15 minutes, suitable for lightly soiled washing

Congratulations – you have opted for a modern, high-quality ʋ For domestic use only Turn the programme selector to Off.
The correct treatment for every stain
ʋ For machine-washable fabrics and hand-washable wool
Correct installation according to the Sorting the laundry

i speedPerfect, j ecoPerfect, , 2, [; further information on

domestic appliance manufactured by Siemens. This washing
machine is distinguished by its economical water and energy separate installation instructions. '/( Select option #/$Change settings Do not allow stains to dry. Remove any solid residues first. Sort the items of laundry as usual

breaks during the programme (fabrics rest in the detergent solution)

in detergent solution Please note the manufacturer's care information.
consumption. availability depends on and load the washing machine. Select a type of stain (cannot be combined).
ʋ To be operated with cold mains water and commercially According to the information on the care labels.
Check the machine Turn the tap off
ʑ

i speedPerfect, j ecoPerfect,
, , , 2, [, ;

i speedPerfect, j ecoPerfect,
, , , 2, [, ;

Non-iron shirts made of cotton, linen, synthetic fibres or i speedPerfect, j ecoPerfect,
, , , 2, [, ;

i speedPerfect, j ecoPerfect,
, , , 2, [, ;
the programme selected;

i speedPerfect, j ecoPerfect,
, , , 2, [, 
Each machine that leaves our factory is inspected thoroughly to available detergents and care products which are According to type, colour, soiling and temperature. There are a total of 16 different stains to choose from. The washing machine tailors the
ensure that it functions properly and is in perfect condition. suitable for use in washing machines. Do not exceed the maximum load page 7. * the display runs through washing temperature, drum movement and soaking time to the type of stain. Hot or cold
– Never use a damaged machine. Not required for AquaStop models Installation

Impregnation a page 9, reduced Final spin at intervals

Observe the important information a page 9. Detergent drawer Information on the programme the following setting water, gentle or intensive washing control (thanks to the new drum structure) and a long or
instructions, page 7.

i speedPerfect, j ecoPerfect, , 2, [, ;
– Do not leave children unattended near the – Inform the after-sales service.

i speedPerfect, j ecoPerfect, , 2, [, 
For further information about products, accessories, spare parts and with compartments I, II, ~ sequence; with progress or load options automatically if short soaking time ensure that the wash programme runs specifically according to the type
washing machine Detergents and care products pressed and held

different types of laundry can be washed together

services visit our web site: www.siemens-home.com or contact our bar where appropriate of stain.
after-sales service centres. – The washing machine is not to be used by Connect the mains plug Washing machine door Remove the washing
ʑ ʑ
Measure according to:

2 Extra rinse, [ Stains,  Rinse Hold

children or persons not familiar with the operating Options see also the Overview of programmes A stain type can be added to each programme via the menu buttons/change buttons.

WM16S796GB
WM14S796GB
Make sure your hands are dry. Amount of laundry, soiling, water hardness (ask your water supply company) Controlpanel

gentle spin between the rinse cycles only

instructions Open the washing machine door and remove the

Programmes with no prewash - place detergent into compartment II, programmes with prewash - divide detergent between compartments I and II.
Take hold of the plug only.
varioPerfect*
ʑ
and manufacturer's instructions. speedPerfect: washes in a shorter time but with a washing

gentle spin only, hang up dripping wet

– Keep pets away from the washing machine. Washing machine washing. This results in optimum stain treatment without the use of additional special detergents.
For models without insert for liquid detergent: If Rinse Hold  (without Final spin) is active: turn the outcome comparable to that of the standard programme.
i speedPerfect -

reduced rinse + spin and final spin

reduced rinse + spin and final spin

door handle
ʑ
Pour liquid detergent into the appropriate dispenser and place in the drum. Maximum load a Overview of programmes, page 7.
Turn the tap on Be careful when opening the detergent drawer while the machine is in
programme selector to Empty or Spin. Standard -
ecoPerfect: saves energy but with a washing outcome
Stains
operation. Select spin speed where necessary. j ecoPerfect Baby food Cosmetics Tea
Select Start/Reload. comparable to that of the standard programme.

Rinse, Spin, Empty, Low spin

Blood Red wine Tomato
– Remove any foreign objects - risk of rusting. End time* When a programme is selected, the time until the programme
Contents Page Dilute viscous fabric softener and fabric conditioner with will be finished is displayed. The programme end time can be Egg Chocolate Strawberry

Options; notes
water. This prevents blockages. – Leave the washing machine door and Soil + sand Sweat Orange
ʋ Intended use ...................................................................................... 1 detergent drawer open so that any residual adjusted in hours, up to a maximum of 24h.
Insert for liquid detergent (depending on model), page 10. water can evaporate. Press the #/$ Change button repeatedly until the desired Grass Dirty socks

*522311*
ʋ Programmes ....................................................................................... 1 Compartment II: detergent for main wash, number of hours appears (h = hour). The time cannot be Coffee Grease + oil
ʋ Setting and adjusting the programme .......................................... 3
ʋ
ʋ
Washing ..........................................................................................3/4
After washing ..................................................................................... 4
water softener, bleach, stain remover
Compartment ~: fabric softener, starch Open the door/set the programme 1
Prewashc
adjusted once the programme has started.
For heavily soiled laundry. Prewash at max. 30 °C ʑ Stain treatment in detail - 2 examples
Egg Soaked in lukewarm water, selected wash cycle with a higher
Compartment I: detergent for Vorwäsche (Prewash) OFF - ON

Easy-care fabrics made of cotton, linen, synthetic fibres

Easy-care fabrics made of cotton, linen, synthetic fibres

ʋ **If the Childlock is active a deactivate it (see page 5).

For delicate, washable fabrics, e.g. made of silk, satin,

Individual settings ..........................................................................5/6 Programmes water level and additional rinse cycles to remove particles

Washing with subsequent waterproofing of all-weather,

curtains weighing 3.5 kg, or light curtains measuring
Dark-coloured fabrics made of cotton and dark easy-
Hard-wearing fabrics, heat-resistant fabrics made of
Easy-iron

Hand or machine-washable fabrics made of wool or

Programme has ended when ... Special spin sequence with subsequent fluffing. Gentle Final

sportswear and outdoor clothing, and clothing with a

ʋ Overview of programmes ................................................................ 7 Detailed overview of programmes a page 7. Observe the instructions on the display panel.
OFF - ON spin at reduced speed - residual moisture in the laundry slightly Blood Blood is first “loosened” in cold water, then the selected wash
ʋ Safety instructions ............................................................................. 8 Temperature and spin speed can be selected individually,

Fabrics made of cotton and easy-care fabrics

... finished, remove washing appears on the increased. programme starts.
ʋ Consumption values ......................................................................... 8
2

weatherproof membrane, waterproof fabrics

depending on the selected programme and programme
Load laundry display panel. 3Signal* Select the volume of the information signals.

1209 / 9000522311
ʋ Important information ...................................................................... 9 progress. For the other types of stain, we have formulated comparable solutions in our intensive
OFF ä quiet ä medium ä loud ä very loud studies.
ʋ Insert for liquid detergent.............................................................. 10 Cotton/Coloureds Hard-wearing fabrics Programme selector Display panel/ Start/Reload Observe the load display on Cancelling the programme

synthetic fibres or blended fabrics

ʋ Care ...................................................................................................10 menu buttons/change buttons the panel a page 9 Button signal* Select the volume of the button signals.
Easy-Care Easy-care fabrics OFF ä quiet ä medium ä loud ä very loud
ʋ Information on the display panel ..................................................10
Mixed Fabrics Different types of laundry
Programmes at high temperatures: Reload
ʋ – To cool the laundry down: Select Rinse. Language* Select the language of the display texts.

‘ For a short programme, Mix Fabrics 40°C with max. spin speed is ideal.
Instructions for blockages .............................................................11

Overview of programmes a
If you want to add subsequent items of laundry after the programme has started, press the 
ʋ
ʋ
What to do if .............................................................................. 12/13 Delicates/Silk Delicate washable fabrics Add detergent and 3 – Select Start/Reload.
Programmes at low temperatures:  Water Plus Higher water level. Laundry washed with more care. Start/Reload button. The machine checks whether reloading is possible. Note the

Dessous (Lingerie)
Type of laundry
Emergency release ..........................................................................13

or blended fabrics

or blended fabrics
ÿ Wool care products OFF - ON
Hand/machine-washable wool
6 – Select Spin or Empty. information in the display panel.

containing wool
blended fabrics
ʋ After-sales service ............................................................................13

cotton or linen
– Select Start/Reload. cRinse Hold After the final rinse, the laundry remains in the water.

(e.g. curtains)
Rinse Extra rinse with spin Observe the recommended

care fabrics
For safety reasons, the washing machine door remains locked when the water level and/or

25 - 30 m²
OFF - ON
Spin Extra spin with selectable spin speed dosage for detergent in the
display a page 9
Changing the programme, if ... 2Extra rinse* Additional rinsing. Longer programme duration. Recommended
temperature is high, or while the drum is rotating.
Empty To drain the rinsing water, select To continue the programme, press the Start/Reload button
... you have selected the wrong programme by mistake: max. +3 Rinses use: for especially delicate skin and/or in areas with very soft
Rinse Hold c(no Final spin) Interior drum light water.
Environmental protection/Conservation tips
Low spin Extra spin with reduced spin speed Close the 4 (model-dependent) – – Reselect the programme.

3.5 kg
5 kg*
8 kg/
[Select stain* Automatic treatment of stubborn stains -> page 6.

2 kg

1 kg
– Always fill the washing machine with a maximum amount of laundry for the relevant – Select Start/Reload. The new programme starts from

reduced load for i speedPerfect option

comes on when the door is Serviceflap

max.
programme. Rapid 15’ Super-short programme washing scratch.
ʑ
opened or closed, or when Display symbols
– Wash normally soiled laundry without a prewash. Textile Guard All-weather, sportswear and outdoor Programme selector for – –, 20° - 90° Temperature °C machine door a programme is started;
Reloading laundry, if ... page 6 Childlock/appliance lock You can lock the washing machine to prevent the functions

– – ... 60 °C

– – ... 40 °C

– – ... 40 °C

– – ... 40 °C

– – ... 60 °C

– – ... 40 °C

– – ... 40 °C

– – ... 40 °C
– – ... 40 °C

– – ... 40 °C
– Instead of Cotton/Coloureds 90 °C, select the Cotton/Coloureds 60 °C clothing a page 9. goes out automatically.

– – ... 90 °C
switching the machine on Select the temperature (– – = cold) Making individual settings
programme along with the j ecoPerfect option. Comparable cleaning with #OFF - ON you have set from being changed inadvertently.
significantly lower energy consumption.
– Measure the detergent according to the manufacturer's instructions and water
Shirts/Blouses
Lingerie
Non-iron shirts
Lingerie programme
and off and for selecting
the programme. Can be
turned in either direction.
cc
Set the spin speed
a page 5.
Stain selection a page 6.
5
0, 400 - 1600* Spin 
... Start/Reload is selected and Top-up then appears on
the display panel.
To activate/deactivate: press the ( Options button for
5 seconds.

Additional programmes
°C
hardness. (* model-dependent) (0=no spin during the Setting the temperature/spin – Do not leave the washing machine door open Note: the childlock can remain active until you wish to start the
– If the laundry is then dried in the tumble dryer, select the appropriate spin speed
Curtains Curtains programme
programme sequence) speed a page 2. Washing for too long as water from the washing could next programme, even after switching off the machine.

Cotton/Coloureds
according to the instructions of the dryer manufacturer. Easy-Care Dark Dark-coloured fabrics leak out. Then deactivate the Childlock after the machine has been

Easy-Care Dark

Shirts/ Blouses
Mixed Fabrics
– Load display not active when reloading.

Delicates/Silk

Textile Guard
Programmes
switched back on.
Automatic stain removal All buttons are sensitive and need only Select Start/Reload.

Easy-Care
3 Foam detection Too much foam in the washing machine.

Rapid 15’
to be touched lightly.

Curtains

ÿ Wool
Automatic treatment of 16 different types of stain. No pretreatment of stains required

Lingerie
– washing machine adjusts the washing process automatically a Page 6. Press Start/Reload Foam detection system active - special programme
sequence to reduce foam.

*
1 2 3 4 5 6 7
 – Risk of scalding.
Allow the detergent solution to cool down
Safety instructions Important information Insert for liquid detergent model-dependent Information about blockages – Turn off the tap. What to do if ... What to do if ...
– Read the Instruction manual and Installation instructions and all other information enclosed
with the washing machine and act accordingly.
Before washing for the first time
Do not load any laundry into the machine. Turn on the tap. Add the following to compartment II:
Position the insert for dispensing liquid detergent:
– Remove the detergent drawer completely -> page 10.
Detergent solution pump
Turn the programme selector to Off, disconnect the mains plug.
ʑ Water is leaking out. –
–
Attach/replace the drainage hose correctly.
Tighten the screw connection of the supply hose. ʑ There are detergent
residues on the laundry.
– Occasionally, phosphate-free detergents contain water-insoluble
residues.
– Retain the documents for subsequent use. – Use the Rinse  cycle or brush out the laundry after washing.
– approx. 1 litre water – Slide the insert forwards.
ʑ No water supply. – Start/Reload not selected?

ʑ
Risk of electric shock – Never pull the cable to disconnect the mains plug. – detergent (dosage according to the manufacturer's instructions for light soiling and the appropriate degree of water Do not use the insert (slide upwards): 1. Open and remove the service flap.
– Only insert/pull out the mains plug with dry hands. Detergent not dispensed. – Tap not turned on? in Reload mode, – Water level too high. Not possible to reload laundry.
hardness) – for gel detergents and washing powder, – Filter may be blocked. Clean the filter a page 11. Start/Reload flashes very – Close door immediately if open.
Danger to life For worn-out appliances: Set the programme selector to Easy-Care 60 °C and select Start/Reload. At the end of the programme, turn the – for programmes with Prewash
or the End time option. – Supply hose kinked or trapped? quickly and an audible – To continue the programme, press Start/Reload.
programme selector to Off. signal sounds
– Disconnect the mains plug.
– Sever the mains cable and discard along with the plug. Protecting the laundry and the machine
Care – Risk of electric shock. Disconnect the mains plug
2. Remove the drainage hose from its holder.
Remove the sealing cap and allow the solution to drain out. ʑ Washing machine door –
cannot be opened. –
Safety function active. Programme terminated? a page 4.
cRinse Hold (no Final spin) selected? If you cannot correct a fault yourself (switching on/off) or a repair is required:
– Destroy the lock on the washing machine door. This will prevent – Empty pockets. – Risk of explosion. No solvents Put the sealing cap back in place. a page 3, 4. – Turn the programme selector to Off and remove the mains plug from the socket.
children from locking themselves in and putting their lives in – Look out for metal items (paperclips, etc.).
ʑ Machine housing, control panel – Can be opened by emergency release only? a page 13. – Turn off the water supply and call the after-sales service a page13.

ʑ
danger. – Wash delicates in a laundry bag (tights, curtains, underwired bras). Programme does not – Start/Reload or End time selected?
– Wipe with a soft, damp cloth.
Danger of suffocation – Keep packaging, film and packaging parts out of the reach of – Fasten zips, do up any buttons. start. Observe the safety
children. – Brush sand out of pockets and collars.
–
–
Do not use any abrasive cloths, scourers or cleaning agents (stainless steel cleaners).
Remove detergent and cleaning agent residue immediately.
3. Unscrew the pump cover carefully (residual water).
4. Clean the interior, pump cover thread and pump housing
–
–
Washing machine door closed?
Childlock active? Deactivate it a page 5. Emergency release e.g. in the event of a power cut instructions
on page 8.
ʑ
Risk of poisoning – Keep detergents and care products out of the reach of children. – Remove curtain fittings or place in the laundry bag. – Do not clean with a jet of water. (the impeller in the detergent solution pump must rotate). Detergent solution does – cRinse Hold (no Final spin) selected? The programme continues when the power supply is restored. However, if the laundry has to
Risk of explosion – Items of laundry pretreated with cleaning agents containing Loading the laundry Cleaning the detergent drawer ... not drain. a page 3, 4. be removed, the washing machine door can be opened as follows:
solvents, e.g. stain remover/cleaning solvent may cause an Insert large and small items of laundry. ... if it contains detergent or fabric softener residues. – Clean the detergent solution pump a page 11.
explosion after being loaded into the washing machine. Ensure that items are not trapped between the door and rubber seal. – Clean the waste pipe and/or drainage hose. Risk of scalding.
ʑ
Rinse items of laundry thoroughly by hand before washing. 1. Pull out, press insert down, remove drawer completely. Water not visible in the – Not a fault - water below the visible area.
Laundry with varying degrees of soiling 2. To remove the insert, push the insert up from below with your finger. 5. Put the pump cover back in place and screw it tight. The handle The detergent solution and laundry may be hot. Allow them to cool down.
Risk of injury – The washing machine door can become very hot. drum.
Wash new items of clothing separately. 3. Clean the detergent dispenser tray and insert with water and a brush should stand vertically. Insert the drainage hose into its holder. Do not reach inside the drum if it is still turning.
–
–
–
Be careful when draining hot detergent solution.
Do not climb onto the washing machine.
Do not lean on the open washing machine door.
light No prewash. The i speedPerfect function can also be selected if desired. and dry it.
4. Attach the insert and engage (connect the cylinder to the guide pin).
6. Refit the service flap and close it.
ʑ Unsatisfactory spin
result.
Laundry wet/too damp.
– Not a fault - the unbalanced-load detection system has
cancelled the spin cycle because of uneven distribution of the
Do not open the door if you can see water through the glass.
1. Turn the programme selector to Off and disconnect the mains plug.
Pretreat any stains as necessary. laundry.
– Do not reach into the drum if it is still rotating. 5. Push in the detergent drawer. To prevent detergent from flowing down the drain unused during the next wash cycle: Distribute small and large items of laundry evenly inside the 2. Drain the detergent solution a page 11.
heavy Insert less laundry. Select Prewash with the programme. Leave the detergent drawer open so that any residual water can pour 1 litre of water into compartment II and start the Empty programme. drum. 3. Pull the emergency release downwards with a tool and release.
Soaking Load laundry of the same colour. evaporate. –  Easy-iron selected? a page 5. Washing machine door can then be opened.
Consumption values Pour soaking agent/detergent into compartment II in accordance with the manufacturer's instructions. Turn the Drainage hose at the siphon – Selected speed too low? a page 5.

Programme Option Load

Electricity
consumption***
Water***
Programme
duration***
programme selector to Cottons /Coloureds 30 °C and press Start/Reload. After approx. 10 minutes, press
Start/Reload to pause the programme. Once the required soaking time has elapsed, press Start/Reload again to ʑ Drum
Rust stains - use chlorine-free cleaning agent, not steel wool.
Turn the programme selector to Off, disconnect the mains plug.
ʑ Drum spins gently
several times.
– Not a fault - unbalanced-load detection system is adjusting the
imbalance.
After-sales service
ʑ ʑ
continue the programme, or select a different programme. 1. Loosen the hose clamp, remove the drainage hose carefully Residual water in the 0 – Not a fault - the action of the care product is not affected.
ʑ
Descaling No laundry in the machine. If you cannot rectify the fault yourself (Troubleshooting a page 12, 13), please contact our
Cotton/Coloureds 30 °C** 8 kg 0.33 kWh 57 l 2:06 h Starching Laundry must not be treated with fabric softener (residual water). compartment for care
This is not necessary if the detergent is dosed correctly. However, if it is – Clean the insert if necessary a page 10. after-sales service. We will always find a suitable solution and will avoid a visit from a service
2. Clean the drainage hose and siphon connecting piece. products.
Cotton/Coloureds 40 °C** 8 kg 0.95 kWh 57 l 2:16 h Starching is possible in all wash programmes using liquid starch. Pour the starch into the ~ fabric softener necessary, follow the instructions of the descaler manufacturer. Suitable 3. Reattach the drainage hose and secure the connection with the hose technician wherever possible.
Cotton/Coloureds 60 °C** 8 kg 1.45 kWh 57 l 2:26 h compartment according to the manufacturer's instructions (if necessary clean it first).
Dyeing/bleaching
descaling products can be purchased from our website or after-sales
service (a page 13).
clamp.
Filter in the water supply
ʑ Odour formation in the
washing machine.
– Run the Cottons/Coloureds 90 °C programme with no load
inserted. Use standard detergent. ʑ You can find the contact details for your nearest after-sales service here or in the after-sales
service directory (depending on model).
jecoPerfect*
ʑ
Cotton/Coloureds 60 °C 8 kg 1.06 kWh 56 l 3:25 h The 3status indicator – Too much detergent used?
Cotton/Coloureds 90 °C 8 kg 2.32 kWh 68 l 2:16 h
Dye should only be used in normal household quantities. Salt may damage stainless steel. Always follow the dye
Information on the display panel depending on model Risk of electric shock lights. Mix 1 tablespoon of fabric softener with ½ litre water and pour GB 0844 8928999 Calls from a BT landline will be charged at up to 3 pence per minute. Washing
manufacturer's instructions. Do not bleach laundry in the washing machine. Do not immerse the AquaStop safety device in water (it contains an electric valve). Appliance has detected into compartment II (not with outdoor or down fabrics). A call set-up fee of up to 6 pence may apply.
Easy-Care 40 °C** 3.5 kg 0.54 kWh 41 l 1:35 h Load display Door open? Close the door properly; laundry may be trapped. a detergent overload. – Reduce the detergent dosage for the next wash cycle. IE 01450 2655
machine
Reduce the water pressure in the supply hose:
Mix Fabrics 40 °C**
Delicate/Silk – – (cold)
3.5 kg
2 kg
0.46 kWh
0.04 kWh
37 l
35 l
0:53 h
0:41 h
The loading sensor detects the load amount in the washing machine.
The laundry is not weighed.
Tap closed? Open the tap fully, supply hose kinked/trapped; clean the filter
a page 11, water pressure too low.
1. Turn off the tap.
2. Select any programme (apart from Spin/Empty).
ʑ Loud spinning, vibrations – Appliance feet fixed?
and “walking” during the Secure the appliance feet a Installation instructions. ʑ Please give the after-sales service the product number (E no.) and the production number
(FD) of the appliance.
Delicate/Silk 30 °C 2 kg 0.14 kWh 35 l 0:41 h Recommended dosage Pump blocked? Detergent solution pump blocked; clean detergent solution pump 3. Press Start/Reload. Allow the programme to run for approx.
spin cycle. – Transport braces removed? Instruction manual en
a page 11. Remove the transport braces a Installation instructions. You will find this information:
40 seconds. on the inside of the washing machine door*/
ʑ
ÿ Wool – – (cold) 2 kg 0.06 kWh 40 l 0:40 h Depending on the programme selected and the load detected, a recommended detergent dosage is displayed in %. Drainage hose/waste pipe blocked; clean the drain hose on the Display panel/indicator – Power cut?
The % display corresponds to the detergent manufacturer's recommendation. siphon a page 11. 4. Turn the programme selector to Off. Disconnect the mains plug. opened service flap* and rear of the appliance.
ÿ Wool 30 °C 2 kg 0.16 kWh 40 l 0:40 h Clean the filter: lamps do not function – Circuit breakers tripped? Reset/replace the circuit breakers. *depending on the model
Load adjust Pause No top-up; Not possible to reload laundry. Press Start/Reload to continue the during operation. – If the fault occurs repeatedly, call the after-sales service.
Product number Production number

ʑ
* Programme setting for testing and energy labelling in accordance with EU directive 92/75/EEC. Water level too high programme. 5. Disconnect the hose from the tap.
ʑ
Independently of the load display, the "Load adjust" automatic load sensing function uses additional sensors to adapt Programme sequence – Not a fault - unbalanced-load detection system is adjusting the Rely on the professionalism of the manufacturer. Please contact us.
** Programme setting for testing with the currently valid version of EN60456. the water and power consumption ideally to each programme, depending on the type of fabric and the load. or Temperature too high Clean the filter using a small brush. This will ensure that the repair is carried out by trained service technicians who arrive
Note for comparative testing: to test using the test programmes, wash using the specified load amount and maximum F: 23 Water in the base tub, appliance leaking. Call the after-sales service. longer than usual. imbalance by repeatedly redistributing the laundry. Read these instructions and the separate
Outdoor+ Laundry must not be treated with fabric softener. and/or on standard and Aqua-Secure models: equipped with genuine spare parts for your appliance.
spin speed. Remove the hose from the rear, – Not a fault - foam detection system active - several rinse cycles Installation instructions before operating
Select the Mix Fabrics 40 °C programme and maximum spin speed as the short programme for coloureds.
Impregnation Clean the detergent drawer thoroughly to remove fabric softener residue. F: 34 Cannot lock washing machine door. Open the door and close it again are added.
so that you can hear it "click"; switch the appliance off and on again; remove the filter using pliers and clean the filter. the washing machine.
*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient Special detergents and impregnating agents suitable for machine washing are available in sports shops.
Dose according to manufacturing instructions: set the programme and make individual settings; start the programme. 6. Connect the hose and check for leaks.
temperature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected
additional functions. 1. Place the special detergent for outdoor clothing in compartment II and Other displays Switch off the appliance, wait 5 seconds and switch on again. If the
2. pour impregnating agent (max. 170 ml) into the ~ compartment. same display appears again, call the after-sales service a page 13.
88 Move the programme selector to Textile Guard. Select temperature.
Press Start/Reload. Final treatment of laundry according to manufacturer's instructions. 9 10 11 12 13
 Before washing for the first time
Your washing machine Intended use Preparation Wash once without any laundry a

Congratulations – you have opted for a modern, high-quality ʋ For domestic use only
domestic appliance manufactured by Siemens. This washing Correct installation according to the
ʋ For machine-washable fabrics and hand-washable wool
machine is distinguished by its economical water and energy separate installation instructions.
in detergent solution
consumption. ʋ To be operated with cold mains water and commercially
Each machine that leaves our factory is inspected thoroughly to available detergents and care products which are Check the machine
ensure that it functions properly and is in perfect condition. suitable for use in washing machines. – Never use a damaged machine.
– Do not leave children unattended near the – Inform the after-sales service.
For further information about products, accessories, spare parts and washing machine
services visit our web site: www.siemens-home.com or contact our
after-sales service centres. – The washing machine is not to be used by Connect the mains plug
children or persons not familiar with the operating Make sure your hands are dry.
instructions Am
Take hold of the plug only.
– Keep pets away from the washing machine.
P
Turn the tap on

Contents Page
ʋ Intended use ...................................................................................... 1 Insert for liquid detergent (depending on model), page 10.
ʋ Programmes ....................................................................................... 1 Compartment II: detergent for main wash,
ʋ Setting and adjusting the programme .......................................... 3 water softener, bleach, stain remover
ʋ Washing ..........................................................................................3/4 Compartment ~: fabric softener, starch
ʋ After washing ..................................................................................... 4
ʋ Individual settings ..........................................................................5/6 Compartment I: detergent for Vorwäsche (Prewash)
Programmes
ʋ Overview of programmes ................................................................ 7 Detailed overview of programmes a page 7.
ʋ Safety instructions ............................................................................. 8 Temperature and spin speed can be selected individually,
ʋ Consumption values ......................................................................... 8 depending on the selected programme and programme
ʋ Important information ...................................................................... 9 progress.
ʋ Insert for liquid detergent.............................................................. 10 Cotton/Coloureds Hard-wearing fabrics Programme selector Display pane
ʋ Care ...................................................................................................10 Easy-Care Easy-care fabrics menu buttons/change
ʋ Information on the display panel ..................................................10
ʋ Instructions for blockages .............................................................11 Mixed Fabrics Different types of laundry
ʋ What to do if .............................................................................. 12/13 Delicates/Silk Delicate washable fabrics
ʋ Emergency release ..........................................................................13 ÿ Wool Hand/machine-washable wool
ʋ After-sales service ............................................................................13
Rinse Extra rinse with spin
Spin Extra spin with selectable spin speed
Empty To drain the rinsing water, select
Rinse Hold c(no Final spin)
Environmental protection/Conservation tips
– Always fill the washing machine with a maximum amount of laundry for the relevant Low spin Extra spin with reduced spin speed
programme. Rapid 15’ Super-short programme
– Wash normally soiled laundry without a prewash. Textile Guard All-weather, sportswear and outdoor Programme selector for – –, 20° - 90° Temp
– Instead of Cotton/Coloureds 90 °C, select the Cotton/Coloureds 60 °C clothing a page 9. switching the machine on
programme along with the j ecoPerfect option. Comparable cleaning with Select the temperat
Shirts/Blouses Non-iron shirts and off and for selecting
significantly lower energy consumption. the programme. Can be 0, 400 - 1600* Spin
– Measure the detergent according to the manufacturer's instructions and water Lingerie Lingerie programme turned in either direction. Set the spin
hardness. Curtains Curtains programme (* model-dependent) (0
– If the laundry is then dried in the tumble dryer, select the appropriate spin speed programme s
according to the instructions of the dryer manufacturer. Easy-Care Dark Dark-coloured fabrics
Automatic stain removal All buttons are se
Automatic treatment of 16 different types of stain. No pretreatment of stains required to be touched ligh
– washing machine adjusts the washing process automatically a Page 6.

1 2
 e
page 9. Load indicator/
recommended dosage
To activate, first open the door, set the
programme and then load the items of laundry.
Washing Switch off the appliance
Turn the programme selector to Off.
Sorting the laundry
Please note the manufacturer's care information.
According to the information on the care labels.
According to type, colour, soiling and temperature. Turn the tap off
Do not exceed the maximum load page 7.
Observe the important information a page 9. Detergent drawer Not required for AquaStop models Installation
instructions, page 7.
with compartments I, II, ~
Detergents and care products
Measure according to:
Washing machine door Remove the washing
mount of laundry, soiling, water hardness (ask your water supply company) Controlpanel Open the washing machine door and remove the
and manufacturer's instructions. washing.
For models without insert for liquid detergent: Washing machine
door handle If Rinse Hold  (without Final spin) is active: turn the
Pour liquid detergent into the appropriate dispenser and place in the drum. programme selector to Empty or Spin.
Be careful when opening the detergent drawer while the machine is in
operation. Select spin speed where necessary.
Select Start/Reload.
Dilute viscous fabric softener and fabric conditioner with – Remove any foreign objects - risk of rusting.
water. This prevents blockages. – Leave the washing machine door and
detergent drawer open so that any residual
water can evaporate.

Open the door/set the programme 1

**If the Childlock is active a deactivate it (see page 5).
Observe the instructions on the display panel. Programme has ended when ...
... finished, remove washing appears on the
Load laundry 2 display panel.
el/ Start/Reload Observe the load display on Cancelling the programme
e buttons the panel a page 9
Programmes at high temperatures:
– To cool the laundry down: Select Rinse.
– Select Start/Reload.
Add detergent and
care products
3 Programmes at low temperatures:

Observe the recommended

6 – Select Spin or Empty.
– Select Start/Reload.
dosage for detergent in the
display a page 9
Changing the programme, if ...
Interior drum light ... you have selected the wrong programme by mistake:
Close the
washing
4 (model-dependent) –
comes on when the door is Serviceflap
– Reselect the programme.
– Select Start/Reload. The new programme starts from
scratch.
opened or closed, or when
perature °C machine door a programme is started;
Reloading laundry, if ... page 6
ture (– – = cold) goes out automatically.
Making individual settings
cc
n speed
a page 5.
Stain selection a page 6.
5
n 
... Start/Reload is selected and Top-up then appears on
the display panel.
0=no spin during the Setting the temperature/spin – Do not leave the washing machine door open
sequence) speed a page 2. Washing for too long as water from the washing could
leak out.
– Load display not active when reloading.
ensitive and need only Select Start/Reload.
htly.
Press Start/Reload
3 4
Individual settings Select stain
The correct treatment for every stain
'/( Select option #/$Change settings Do not allow stains to dry. Remove any solid residues first. Sort the items of laundry as usual
availability depends on and load the washing machine. Select a type of stain (cannot be combined).
the programme selected;
* the display runs through
the following setting
ʑ There are a total of 16 different stains to choose from. The washing machine tailors the
washing temperature, drum movement and soaking time to the type of stain. Hot or cold
Information on the programme water, gentle or intensive washing control (thanks to the new drum structure) and a long or
sequence; with progress or load options automatically if short soaking time ensure that the wash programme runs specifically according to the type
bar where appropriate pressed and held of stain.

ʑ Options see also the Overview of programmes

varioPerfect* speedPerfect: washes in a shorter time but with a washing
ʑ A stain type can be added to each programme via the menu buttons/change buttons.

i speedPerfect - outcome comparable to that of the standard programme.

Maximum load a Overview of programmes, page 7.
ʑ This results in optimum stain treatment without the use of additional special detergents.

Standard -
j ecoPerfect ecoPerfect: saves energy but with a washing outcome
comparable to that of the standard programme.
ʑ Stains
Baby food Cosmetics Tea
Blood Red wine Tomato
End time* When a programme is selected, the time until the programme
Egg Chocolate Strawberry
will be finished is displayed. The programme end time can be
adjusted in hours, up to a maximum of 24h. Soil + sand Sweat Orange
Press the #/$ Change button repeatedly until the desired Grass Dirty socks
number of hours appears (h = hour). The time cannot be Coffee Grease + oil
adjusted once the programme has started.

Prewashc
OFF - ON
For heavily soiled laundry. Prewash at max. 30 °C ʑ Stain treatment in detail - 2 examples
Egg Soaked in lukewarm water, selected wash cycle with a higher
water level and additional rinse cycles to remove particles
Easy-iron Special spin sequence with subsequent fluffing. Gentle Final
OFF - ON spin at reduced speed - residual moisture in the laundry slightly Blood Blood is first “loosened” in cold water, then the selected wash
increased. programme starts.
3Signal* Select the volume of the information signals. For the other types of stain, we have formulated comparable solutions in our intensive
OFF ä quiet ä medium ä loud ä very loud studies.
Button signal* Select the volume of the button signals.
OFF ä quiet ä medium ä loud ä very loud
Reload
Language* Select the language of the display texts.
If you want to add subsequent items of laundry after the programme has started, press the 
 Water Plus Higher water level. Laundry washed with more care. Start/Reload button. The machine checks whether reloading is possible. Note the
OFF - ON information in the display panel.
cRinse Hold After the final rinse, the laundry remains in the water.
OFF - ON For safety reasons, the washing machine door remains locked when the water level and/or
temperature is high, or while the drum is rotating.
2Extra rinse* Additional rinsing. Longer programme duration. Recommended To continue the programme, press the Start/Reload button
max. +3 Rinses use: for especially delicate skin and/or in areas with very soft
water.
[Select stain* Automatic treatment of stubborn stains -> page 6.

ʑ Display symbols
Childlock/appliance lock You can lock the washing machine to prevent the functions
#OFF - ON you have set from being changed inadvertently.
To activate/deactivate: press the ( Options button for
5 seconds.
Note: the childlock can remain active until you wish to start the
next programme, even after switching off the machine.
Then deactivate the Childlock after the machine has been
switched back on.
3 Foam detection Too much foam in the washing machine.
Foam detection system active - special programme
sequence to reduce foam.
5 6
 Overview of programmes a Check the consumption values table on page 8 and the instructions on page 9.

Programmes °C max. Type of laundry Options; notes

Cotton/Coloureds – – ... 90 °C 8 kg/ Hard-wearing fabrics, heat-resistant fabrics made of i speedPerfect*, j ecoPerfect,
Prewash,  Easy-iron,  Water Plus,
5 kg* cotton or linen 2 Extra rinse, [ Stains,  Rinse Hold
Easy-care fabrics made of cotton, linen, synthetic fibres
Easy-Care – – ... 60 °C
or blended fabrics i speedPerfect, j ecoPerfect,
, , , 2, [, 

Fabrics made of cotton and easy-care fabrics i speedPerfect, j ecoPerfect,
, , , 2, [, ;

Mixed Fabrics – – ... 40 °C
different types of laundry can be washed together
3.5 kg
Easy-Care Dark – – ... 40 °C Dark-coloured fabrics made of cotton and dark easy- i speedPerfect, j ecoPerfect,
, , , 2, [, ;
care fabrics reduced rinse + spin and final spin
Curtains – – ... 40 °C curtains weighing 3.5 kg, or light curtains measuring i speedPerfect, j ecoPerfect, , 2, [, ;
25 - 30 m² reduced rinse + spin and final spin
Non-iron shirts made of cotton, linen, synthetic fibres or i speedPerfect, j ecoPerfect,
, , , 2, [, ;
Shirts/ Blouses – – ... 60 °C
blended fabrics gentle spin only, hang up dripping wet
For delicate, washable fabrics, e.g. made of silk, satin,
Delicates/Silk – – ... 40 °C synthetic fibres or blended fabrics i speedPerfect, j ecoPerfect,
, , , 2, [, ;
(e.g. curtains) gentle spin between the rinse cycles only
2 kg
ÿ Wool – – ... 40 °C Hand or machine-washable fabrics made of wool or ; particularly gentle wash programme to prevent shrinkage of laundry, longer
containing wool breaks during the programme (fabrics rest in the detergent solution)
Easy-care fabrics made of cotton, linen, synthetic fibres
Rapid 15’ – – ... 40 °C or blended fabrics ; short programme, approx. 15 minutes, suitable for lightly soiled washing
Lingerie – – ... 40 °C Dessous (Lingerie) i speedPerfect, j ecoPerfect, , 2, [, 
1 kg Washing with subsequent waterproofing of all-weather,
Textile Guard – – ... 40 °C sportswear and outdoor clothing, and clothing with a i speedPerfect, j ecoPerfect, , 2, [; further information on
weatherproof membrane, waterproof fabrics Impregnation a page 9, reduced Final spin at intervals
Additional programmes Rinse, Spin, Empty, Low spin
* reduced load for i speedPerfect option
‘ For a short programme, Mix Fabrics 40°C with max. spin speed is ideal.
Programmes with no prewash - place detergent into compartment II, programmes with prewash - divide detergent between compartments I and II.

1209 / 9000522311 Siemens Electrogeräte GmbH

WM16S796GB
Carl-Wery-Str. 34
*522311* WM14S796GB 81739 München / Deutschland

7
 Safety instructions Important information
– Read the Instruction manual and Installation instructions and all other information enclosed Before washing for the first time
with the washing machine and act accordingly.
– Retain the documents for subsequent use. Do not load any laundry into the machine. Turn on the tap. Add the following to compartment II:
– approx. 1 litre water
Risk of electric shock – Never pull the cable to disconnect the mains plug. – detergent (dosage according to the manufacturer's instructions for light soiling and the appropriate degree of water
– Only insert/pull out the mains plug with dry hands. hardness)
Danger to life For worn-out appliances: Set the programme selector to Easy-Care 60 °C and select Start/Reload. At the end of the programme, turn the
programme selector to Off.
– Disconnect the mains plug.
– Sever the mains cable and discard along with the plug. Protecting the laundry and the machine
– Destroy the lock on the washing machine door. This will prevent – Empty pockets.
children from locking themselves in and putting their lives in – Look out for metal items (paperclips, etc.).
danger. – Wash delicates in a laundry bag (tights, curtains, underwired bras).
Danger of suffocation – Keep packaging, film and packaging parts out of the reach of – Fasten zips, do up any buttons.
children. – Brush sand out of pockets and collars.
Risk of poisoning – Keep detergents and care products out of the reach of children. – Remove curtain fittings or place in the laundry bag.
Risk of explosion – Items of laundry pretreated with cleaning agents containing Loading the laundry
solvents, e.g. stain remover/cleaning solvent may cause an Insert large and small items of laundry.
explosion after being loaded into the washing machine. Ensure that items are not trapped between the door and rubber seal.
Rinse items of laundry thoroughly by hand before washing.
Laundry with varying degrees of soiling
Risk of injury – The washing machine door can become very hot.
Wash new items of clothing separately.
– Be careful when draining hot detergent solution.
– Do not climb onto the washing machine. light No prewash. The i speedPerfect function can also be selected if desired.
– Do not lean on the open washing machine door. Pretreat any stains as necessary.
– Do not reach into the drum if it is still rotating.
heavy Insert less laundry. Select Prewash with the programme.
Soaking Load laundry of the same colour.
Consumption values Pour soaking agent/detergent into compartment II in accordance with the manufacturer's instructions. Turn the
programme selector to Cottons /Coloureds 30 °C and press Start/Reload. After approx. 10 minutes, press
Electricity Programme Start/Reload to pause the programme. Once the required soaking time has elapsed, press Start/Reload again to
Programme Option Load Water***
consumption*** duration*** continue the programme, or select a different programme.
Cotton/Coloureds 30 °C** 8 kg 0.33 kWh 57 l 2:06 h Starching Laundry must not be treated with fabric softener
Cotton/Coloureds 40 °C** 8 kg 0.95 kWh 57 l 2:16 h Starching is possible in all wash programmes using liquid starch. Pour the starch into the ~ fabric softener
Cotton/Coloureds 60 °C** 8 kg 1.45 kWh 57 l 2:26 h compartment according to the manufacturer's instructions (if necessary clean it first).

Cotton/Coloureds 60 °C jecoPerfect* 8 kg 1.06 kWh 56 l 3:25 h

Dyeing/bleaching
Dye should only be used in normal household quantities. Salt may damage stainless steel. Always follow the dye
Cotton/Coloureds 90 °C 8 kg 2.32 kWh 68 l 2:16 h manufacturer's instructions. Do not bleach laundry in the washing machine.
Easy-Care 40 °C** 3.5 kg 0.54 kWh 41 l 1:35 h Load display
Mix Fabrics 40 °C** 3.5 kg 0.46 kWh 37 l 0:53 h The loading sensor detects the load amount in the washing machine.
Delicate/Silk – – (cold) 2 kg 0.04 kWh 35 l 0:41 h The laundry is not weighed.
Delicate/Silk 30 °C 2 kg 0.14 kWh 35 l 0:41 h Recommended dosage
ÿ Wool – – (cold) 2 kg 0.06 kWh 40 l 0:40 h Depending on the programme selected and the load detected, a recommended detergent dosage is displayed in %.
The % display corresponds to the detergent manufacturer's recommendation.
ÿ Wool 30 °C 2 kg 0.16 kWh 40 l 0:40 h Load adjust
* Programme setting for testing and energy labelling in accordance with EU directive 92/75/EEC. Independently of the load display, the "Load adjust" automatic load sensing function uses additional sensors to adapt
** Programme setting for testing with the currently valid version of EN60456. the water and power consumption ideally to each programme, depending on the type of fabric and the load.
Note for comparative testing: to test using the test programmes, wash using the specified load amount and maximum Outdoor+ Laundry must not be treated with fabric softener.
spin speed. Impregnation Clean the detergent drawer thoroughly to remove fabric softener residue.
Select the Mix Fabrics 40 °C programme and maximum spin speed as the short programme for coloureds.
*** The values deviate from the indicated values depending on water pressure, hardness, and inlet temperature, ambient Special detergents and impregnating agents suitable for machine washing are available in sports shops.
temperature, type, amount and soiling of the laundry, detergent used, fluctuations in the power supply and selected Dose according to manufacturing instructions:
additional functions. 1. Place the special detergent for outdoor clothing in compartment II and
2. pour impregnating agent (max. 170 ml) into the ~ compartment.
88 Move the programme selector to Textile Guard. Select temperature.
Press Start/Reload. Final treatment of laundry according to manufacturer's instructions. 9
 – Risk of scalding.
Allow the detergent solution to cool down
Insert for liquid detergent model-dependent Information about blockages – Turn off the tap.

Position the insert for dispensing liquid detergent: Detergent solution pump
– Remove the detergent drawer completely -> page 10. Turn the programme selector to Off, disconnect the mains plug.
– Slide the insert forwards.
Do not use the insert (slide upwards): 1. Open and remove the service flap.
– for gel detergents and washing powder,
– for programmes with Prewash
or the End time option.
2. Remove the drainage hose from its holder.
Care – Risk of electric shock. Disconnect the mains plug
– Risk of explosion. No solvents
Remove the sealing cap and allow the solution to drain out.
Put the sealing cap back in place.

ʑ Machine housing, control panel

– Wipe with a soft, damp cloth.
– Do not use any abrasive cloths, scourers or cleaning agents (stainless steel cleaners). 3. Unscrew the pump cover carefully (residual water).
– Remove detergent and cleaning agent residue immediately. 4. Clean the interior, pump cover thread and pump housing
– Do not clean with a jet of water. (the impeller in the detergent solution pump must rotate).
Cleaning the detergent drawer ...
... if it contains detergent or fabric softener residues.
1. Pull out, press insert down, remove drawer completely.
2. To remove the insert, push the insert up from below with your finger. 5. Put the pump cover back in place and screw it tight. The handle
3. Clean the detergent dispenser tray and insert with water and a brush should stand vertically. Insert the drainage hose into its holder.
and dry it. 6. Refit the service flap and close it.
4. Attach the insert and engage (connect the cylinder to the guide pin).
5. Push in the detergent drawer. To prevent detergent from flowing down the drain unused during the next wash cycle:
Leave the detergent drawer open so that any residual water can pour 1 litre of water into compartment II and start the Empty programme.
evaporate.
Drainage hose at the siphon
ʑ Drum
Rust stains - use chlorine-free cleaning agent, not steel wool.
Turn the programme selector to Off, disconnect the mains plug.
1. Loosen the hose clamp, remove the drainage hose carefully
ʑ Descaling No laundry in the machine.
This is not necessary if the detergent is dosed correctly. However, if it is
(residual water).
2. Clean the drainage hose and siphon connecting piece.
necessary, follow the instructions of the descaler manufacturer. Suitable 3. Reattach the drainage hose and secure the connection with the hose
descaling products can be purchased from our website or after-sales clamp.
service (a page 13).
Filter in the water supply
Information on the display panel depending on model Risk of electric shock
Do not immerse the AquaStop safety device in water (it contains an electric valve).
Door open? Close the door properly; laundry may be trapped. Reduce the water pressure in the supply hose:
Tap closed? Open the tap fully, supply hose kinked/trapped; clean the filter 1. Turn off the tap.
a page 11, water pressure too low.
2. Select any programme (apart from Spin/Empty).
Pump blocked? Detergent solution pump blocked; clean detergent solution pump 3. Press Start/Reload. Allow the programme to run for approx.
a page 11. 40 seconds.
Drainage hose/waste pipe blocked; clean the drain hose on the
siphon a page 11. 4. Turn the programme selector to Off. Disconnect the mains plug.
Clean the filter:
Pause No top-up; Not possible to reload laundry. Press Start/Reload to continue the
Water level too high programme. 5. Disconnect the hose from the tap.
or Temperature too high Clean the filter using a small brush.
F: 23 Water in the base tub, appliance leaking. Call the after-sales service. and/or on standard and Aqua-Secure models:
F: 34 Cannot lock washing machine door. Open the door and close it again Remove the hose from the rear,
so that you can hear it "click"; switch the appliance off and on again; remove the filter using pliers and clean the filter.
set the programme and make individual settings; start the programme. 6. Connect the hose and check for leaks.
Other displays Switch off the appliance, wait 5 seconds and switch on again. If the
same display appears again, call the after-sales service a page 13.
10 11
What to do if ... What to do if ...
ʑ Water is leaking out. –
–
Attach/replace the drainage hose correctly.
Tighten the screw connection of the supply hose. ʑ There are detergent
residues on the laundry.
– Occasionally, phosphate-free detergents contain water-insoluble
residues.
– Use the Rinse  cycle or brush out the laundry after washing.
ʑ No water supply. – Start/Reload not selected?
Detergent not dispensed. –
–
Tap not turned on?
Filter may be blocked. Clean the filter a page 11. ʑ in Reload mode,
quickly and an audible
– Water level too high. Not possible to reload laundry.
Start/Reload flashes very – Close door immediately if open.
– Supply hose kinked or trapped? – To continue the programme, press Start/Reload.
signal sounds
ʑ Washing machine door –
cannot be opened. –
Safety function active. Programme terminated? a page 4.
cRinse Hold (no Final spin) selected? If you cannot correct a fault yourself (switching on/off) or a repair is required:
a page 3, 4. – Turn the programme selector to Off and remove the mains plug from the socket.
– Can be opened by emergency release only? a page 13. – Turn off the water supply and call the after-sales service a page13.

ʑ Programme does not

start.
–
–
Start/Reload or End time selected?
Washing machine door closed?
– Childlock active? Deactivate it a page 5. Emergency release e.g. in the event of a power cut
ʑ Detergent solution does –
not drain.
cRinse Hold (no Final spin) selected?
a page 3, 4.
The programme continues when the power supply is restored. However, if the laundry has to
be removed, the washing machine door can be opened as follows:
– Clean the detergent solution pump a page 11.
– Clean the waste pipe and/or drainage hose. Risk of scalding.
ʑ Water not visible in the –
drum.
Not a fault - water below the visible area.
The detergent solution and laundry may be hot. Allow them to cool down.
Do not reach inside the drum if it is still turning.
ʑ Unsatisfactory spin
result.
Laundry wet/too damp.
– Not a fault - the unbalanced-load detection system has
cancelled the spin cycle because of uneven distribution of the
Do not open the door if you can see water through the glass.
1. Turn the programme selector to Off and disconnect the mains plug.
laundry.
Distribute small and large items of laundry evenly inside the 2. Drain the detergent solution a page 11.
drum. 3. Pull the emergency release downwards with a tool and release.
–  Easy-iron selected? a page 5. Washing machine door can then be opened.
– Selected speed too low? a page 5.

ʑ Drum spins gently

several times.
– Not a fault - unbalanced-load detection system is adjusting the
imbalance.
After-sales service
Residual water in the 0 – Not a fault - the action of the care product is not affected.
ʑ compartment for care
products.
– Clean the insert if necessary a page 10. ʑ If you cannot rectify the fault yourself (Troubleshooting a page 12, 13), please contact our
after-sales service. We will always find a suitable solution and will avoid a visit from a service
technician wherever possible.

ʑ Odour formation in the

washing machine.
– Run the Cottons/Coloureds 90 °C programme with no load
inserted. Use standard detergent. ʑ You can find the contact details for your nearest after-sales service here or in the after-sales
service directory (depending on model).
The 3status indicator
ʑ lights.
Appliance has detected
– Too much detergent used?
Mix 1 tablespoon of fabric softener with ½ litre water and pour GB 0844 8928999 Calls from a BT landline will be charged at up to 3 pence per minute.
A call set-up fee of up to 6 pence may apply.
into compartment II (not with outdoor or down fabrics).
a detergent overload. – Reduce the detergent dosage for the next wash cycle. IE 01450 2655

ʑ Loud spinning, vibrations – Appliance feet fixed?

and “walking” during the
spin cycle.
Secure the appliance feet a Installation instructions. ʑ Please give the after-sales service the product number (E no.) and the production number
(FD) of the appliance.
– Transport braces removed?
Remove the transport braces a Installation instructions. You will find this information:
on the inside of the washing machine door*/
ʑ Display panel/indicator – Power cut?
lamps do not function
during operation.
– Circuit breakers tripped? Reset/replace the circuit breakers.
Product number Production number
opened service flap* and rear of the appliance.
*depending on the model
– If the fault occurs repeatedly, call the after-sales service.

ʑ Programme sequence
longer than usual.
– Not a fault - unbalanced-load detection system is adjusting the
imbalance by repeatedly redistributing the laundry.
ʑ Rely on the professionalism of the manufacturer. Please contact us.
This will ensure that the repair is carried out by trained service technicians who arrive
equipped with genuine spare parts for your appliance.
– Not a fault - foam detection system active - several rinse cycles
are added.

12 13
Observe the safety
instructions
on page 8.

Washing
machine

Instruction manual en

Read these instructions and the separate

Installation instructions before operating
the washing machine.