FC 5200

SERIES
Specifications
Sit-Down Rider Lift Truck
 FC 5200 Series Sit-down Rider
Lift Truck

9.5" 36" (914 mm) Std

(241 mm) 42" (1067 mm) Opt
16
(1100 mm) 39 10.5" 37" (940 mm) Std
(267 mm) 43" (1092 mm) Opt
55, 60, 65 55, 60, 65

21

48"
(1219 mm)

18

20

86"
(2184 mm)
9
Std
17

19.8" (503 mm) - 40, 50, 55

18.2" 24.3" (617 mm) - 60, 65
48 (462 mm)14.6"

1.0" 2.8"
42 41 (25 mm) (71 mm)

38 22

15
 FC 5200 Series Specifications

Imperial Metric Imperial Metric

1 Manufacturer Crown Equipment Corporation
General Information

2 Model FC 5215-40 FC 5225-40

3 Load Capacity* lb kg 4000 1810 4000 1810
4 Load Center Fork Face to Load CG in mm 24 600 24 600
5 Power Electric 36-Volt / 48-Volt
6 Operator Type Sit-down Rider Counterbalanced
7 Tire Type Cushion
8 Wheels (x = driven) Number Front/Rear 2x/2
9 Mast (See Mast Chart) Lifting Height (MFH) in mm 188 4775 188 4775
Free Lift Height in mm 32.2 815 32.2 815
12 Fork Carriage ITA Class II
13 Forks Standard L x W x T in mm 36x4x1.8 915x102x46 36x4x1.8 915x102x46
30, 32, 760, 815, 30, 32, 760, 815,
Optional Lengths 40, 42, 1015, 1065, 40, 42, 1015, 1065,
in mm
48, 54, 1220, 1370, 48, 54, 1220, 1370,
60, 72 1525, 1825 60, 72 1525, 1825
14 Tilt F° / B° degree 5/5
Dimensions

Interlocked Fork Height** in mm 66 1675 66 1675

Battery Compartment Nominal in mm 27 686 33 838
15 Headlength*** Length to Fork Face in mm 78.4 1990 84.6 2150
16 Width Overall Standard Tread in mm 43.9 1115 43.9 1115
Wide Tread in mm 47.5 1210 47.5 1210
17 Height with Load Backrest Mast Collapsed in mm 83 2105 83 2105
18 Mast Extended in mm 236 5995 236 5995
20 SIP to Bottom of OHG Std / Suspension
(86" [2184 mm] Tall OHG) in mm 36.1/35.8 918/910 36.1/35.8 918/910
21 Turning Radius in mm 66.6 1690 72.1 1830
22 Load Distance*** Center of Wheel to Fork Face in mm 15.8 400 15.8 400
23 Aisle Width Right Angle Stack
(Add Load + Clear) in mm 82.4 2090 87.9 2230
24 Speed Travel Empty / Loaded 48V mph km/h 12.3/11.0 19.7/17.7 12.3/11.0 19.7/17.7
Performance

Empty / Loaded 36V mph km/h 11.0/10.0 17.7/16.1 11.0/10.0 17.7/16.1

25 Speed Lift† Empty / Loaded 48V fpm m/s 115/113 0.58/0.57 115/113 0.58/0.57
Empty / Loaded 36V fpm m/s 115/86 0.58/0.44 115/86 0.58/0.44
26 Speed Lower Empty / Loaded (Manual Hyd) fpm m/s 90/90 0.46/0.46 90/90 0.46/0.46
Empty / Loaded (EPV Hyd) fpm m/s 100/100 0.51/0.51 100/100 0.51/0.51
32 Weight, Less Battery lb kg 7240 3285 7325 3320
Weights

33 Axle Load with Max Front lb kg 12034 5451 12060 5462

Battery, Loaded Rear lb kg 2406 1094 3265 1483
34 Axle Load with Max Battery, Front lb kg 4831 2192 5149 2335
Unloaded Rear lb kg 5609 2543 6176 2800
36 Tires Size Front in mm 21x7x15 533x178x381 21x7x15 533x178x381
37 Size Rear in mm 16x6x10.5 406x152x267 16x6x10.5 406x152x267
38 Wheelbase in mm 49.7 1260 54.7 1390
39 Tread/Track Width Front Standard / Rear in mm 36.9/36 937/914 36.9/36 937/914
Chassis

Front Optional / Rear in mm 40.5/36 1029/914 40.5/36 1029/914

40 Ground Clearance, Loaded Lowest Point in mm 3 76 3 76
41 Center of Wheelbase in mm 4.8 122 4.8 122
42 Grade Clearance, Loaded % 38 35
43 Brakes Service Foot - Motor
44 Parking Auto - Electric
45 Battery†† Type Lead Acid
46 Capacity - 36V 5hr Rating @ 30°C AH 1180 1400
Capacity - 36V 6hr Rating @ 25°C AH 1210 1430
kWh 42.5 50.2
Capacity - 48V 5hr Rating @ 30°C AH 860 1075
Capacity - 48V 6hr Rating @ 25°C AH 880 1100
Battery

kWh 41.2 51.5

47 Weight - Min lb kg 2630 1195 2800 1270
Weight - Max lb kg 3200 1450 4000 1815
Size - Max Length 27.25 692 32.94 837
Width 38.69 983 38.69 983
Height 22.25 565 22.25 565
Cable Lead Length/Connector Pos. in mm 18/A 455/A 18/A 455/A
48 Battery Floor Height With Rollers / w/o Rollers in mm 17.4/17.1 442/434 17.4/17.1 442/434
49 Motors Dual Tractor Motors, dia in mm 8.9 225 8.9 225
Motors

50 Lift Motor, dia in mm 7.2 183 7.2 183

51 Operating Pressure For Attachments psi bar Up to 3000 Up to 207 Up to 3000 Up to 207
* Optional masts, attachments, longer load dimensions and higher lifting heights may result in derating of the capacity. Contact local dealer.
** Forward tilt restricted to 2° above this height.
*** Add 1.9” (47 mm) for class II & III Crown integrated sideshifts, add 2.3” (59 mm) for class II hang-on sideshift, and add 2.5” (64 mm) for class III hang-on sideshift.
† Based on TT mast.
†† With maintenance-free batteries or batteries with a lid (flat top), consult factory.

 FC 5200 Series Specifications

Imperial Metric Imperial Metric

1 Manufacturer Crown Equipment Corporation
General Information

2 Model FC 5215-50 FC 5225-50

3 Load Capacity* lb kg 5000 2265 5000 2265
4 Load Center Fork Face to Load CG in mm 24 600 24 600
5 Power Electric 36-Volt / 48-Volt
6 Operator Type Sit-down Rider Counterbalanced
7 Tire Type Cushion
8 Wheels (x = driven) Number Front/Rear 2x/2
9 Mast (See Mast Chart) Lifting Height (MFH) in mm 188 4775 188 4775
Free Lift Height in mm 32.2 815 32.2 815
12 Fork Carriage ITA Class II
13 Forks Standard L x W x T in mm 36x4x1.8 915x102x46 36x4x1.8 915x102x46
30, 32, 760, 815, 30, 32, 760, 815,
Optional Lengths 40, 42, 1015, 1065, 40, 42, 1015, 1065,
in mm
48, 54, 1220, 1370, 48, 54, 1220, 1370,
60, 72 1525, 1825 60, 72 1525, 1825
14 Tilt F° / B° degree 5/5
Dimensions

Interlocked Fork Height** in mm 66 1675 66 1675

Battery Compartment Nominal in mm 27 686 33 838
15 Headlength*** Length to Fork Face in mm 81.4 2070 84.6 2150
16 Width Overall Standard Tread in mm 43.9 1115 43.9 1115
Wide Tread in mm 47.5 1210 47.5 1210
17 Height with Load Backrest Mast Collapsed in mm 83 2105 83 2105
18 Mast Extended in mm 236 5995 236 5995
20 SIP to Bottom of OHG Std / Suspension
(86" [2184 mm] Tall OHG) in mm 36.1/35.8 918/910 36.1/35.8 918/910
21 Turning Radius in mm 69.3 1760 72.1 1830
22 Load Distance*** Center of Wheel to Fork Face in mm 15.8 400 15.8 400
23 Aisle Width Right Angle Stack
(Add Load + Clear) in mm 85.1 2160 87.9 2230
24 Speed Travel Empty / Loaded 48V mph km/h 12.3/11.0 19.7/17.7 12.3/11.0 19.7/17.7
Performance

Empty / Loaded 36V mph km/h 11.0/10.0 17.7/16.1 11.0/10.0 17.7/16.1

25 Speed Lift† Empty / Loaded 48V fpm m/s 115/102 0.58/0.52 115/102 0.58/0.52
Empty / Loaded 36V fpm m/s 115/75 0.58/0.38 115/75 0.58/0.38
26 Speed Lower Empty / Loaded (Manual Hyd) fpm m/s 90/90 0.46/0.46 90/90 0.46/0.46
Empty / Loaded (EPV Hyd) fpm m/s 100/100 0.51/0.51 100/100 0.51/0.51
32 Weight, Less Battery lb kg 8090 3670 7825 3550
Weights

33 Axle Load with Max Front lb kg 13657 6189 13909 6304

Battery, Loaded Rear lb kg 2633 1196 2916 1326
34 Axle Load with Max Front lb kg 4653 2110 5271 2391
Battery, Unloaded Rear lb kg 6637 3010 6554 2974
36 Tires Size Front in mm 21x7x15 533x178x381 21x7x15 533x178x381
37 Size Rear in mm 16x6x10.5 406x152x267 16x6x10.5 406x152x267
38 Wheelbase in mm 49.7 1260 54.7 1390
39 Tread/Track Width Front Standard / Rear in mm 36.9/36 937/914 36.9/36 937/914
Chassis

Front Optional / Rear in mm 40.5/36 1029/914 40.5/36 1029/914

40 Ground Clearance, Loaded Lowest Point in mm 3 76 3 76
41 Center of Wheelbase in mm 4.8 122 4.8 122
42 Grade Clearance, Loaded % 38 35
43 Brakes Service Foot - Motor
44 Parking Auto - Electric
45 Battery†† Type Lead Acid
46 Capacity - 36V 5hr Rating @ 30°C AH 1180 1400
Capacity - 36V 6hr Rating @ 25°C AH 1210 1430
kWh 42.5 50.2
Capacity - 48V 5hr Rating @ 30°C AH 860 1075
Capacity - 48V 6hr Rating @ 25°C AH 880 1100
Battery

kWh 41.2 51.5

47 Weight - Min lb kg 2630 1195 2800 1270
Weight - Max lb kg 3200 1450 4000 1815
Size - Max Length 27.25 692 32.94 837
Width 38.69 983 38.69 983
Height 22.25 565 22.25 565
Cable Lead Length/Connector Pos. in mm 18/A 455/A 18/A 455/A
48 Battery Floor Height With Rollers / w/o Rollers in mm 17.4/17.1 442/434 17.4/17.1 442/434
49 Motors Dual Tractor Motors, dia in mm 8.9 225 8.9 225
Motors

50 Lift Motor, dia in mm 7.2 183 7.2 183

51 Operating Pressure For Attachments psi bar Up to 3000 Up to 207 Up to 3000 Up to 207
* Optional masts, attachments, longer load dimensions and higher lifting heights may result in derating of the capacity. Contact local dealer.
** Forward tilt restricted to 2° above this height.
*** Add 1.9” (47 mm) for class II & III Crown integrated sideshifts, add 2.3” (59 mm) for class II hang-on sideshift, and add 2.5” (64 mm) for class III hang-on sideshift.
† Based on TT mast.
†† With maintenance-free batteries or batteries with a lid (flat top), consult factory.

 FC 5200 Series Specifications

Imperial Metric Imperial Metric

1 Manufacturer Crown Equipment Corporation
General Information

2 Model FC 5245-50 FC 5225-55

3 Load Capacity* lb kg 5000 2265 5500 2490
4 Load Center Fork Face to Load CG in mm 24 600 24 600
5 Power Electric 36-Volt / 48-Volt
6 Operator Type Sit-down Rider Counterbalanced
7 Tire Type Cushion
8 Wheels (x = driven) Number Front/Rear 2x/2
9 Mast (See Mast Chart) Lifting Height (MFH) in mm 188 4775 188 4775
Free Lift Height in mm 32.2 815 32.2 815
12 Fork Carriage ITA Class II
13 Forks Standard L x W x T in mm 36x4x1.8 915x102x46 36x5x1.8 915x127x46
30, 32, 760, 815, 30, 40, 760, 1015,
Optional Lengths 40, 42, 1015, 1065, 42, 48, 1065, 1220,
in mm
48, 54, 1220, 1370, 54, 60, 1370, 1525,
60, 72 1525, 1825 72 1825
14 Tilt F° / B° degree 5/5
Dimensions

Interlocked Fork Height** in mm 66 1675 66 1675

Battery Compartment Nominal in mm 36 914 33 838
15 Headlength*** Length to Fork Face in mm 87.7 2230 87.6 2225
16 Width Overall Standard Tread in mm 43.9 1115 45.7 1160
Wide Tread in mm 47.5 1210 48 1220
17 Height with Load Backrest Mast Collapsed in mm 83 2105 83 2105
18 Mast Extended in mm 236 5995 236 5995
20 SIP to Bottom of OHG Std / Suspension
(86" [2184 mm] Tall OHG) in mm 36.1/35.8 918/910 36.1/35.8 918/910
21 Turning Radius in mm 74.9 1905 74.9 1905
22 Load Distance*** Center of Wheel to Fork Face in mm 15.8 400 15.8 400
23 Aisle Width Right Angle Stack
(Add Load + Clear) in mm 90.7 2305 90.7 2315
24 Speed Travel Empty / Loaded 48V mph km/h 12.3/11.0 19.7/17.7 12.3/11.0 19.7/17.7
Performance

Empty / Loaded 36V mph km/h 11.0/10.0 17.7/16.1 11.0/10.0 17.7/16.1

25 Speed Lift† Empty / Loaded 48V fpm m/s 115/102 0.58/0.52 115/97 0.58/0.49
Empty / Loaded 36V fpm m/s 115/75 0.58/0.38 115/69 0.58/0.35
26 Speed Lower Empty / Loaded (Manual Hyd) fpm m/s 90/90 0.46/0.46 90/90 0.46/0.46
Empty / Loaded (EPV Hyd) fpm m/s 100/100 0.51/0.51 100/100 0.51/0.51
32 Weight, Less Battery lb kg 7580 3440 8405 3810
Weights

33 Axle Load with Max Front lb kg 13695 6209 14593 6610

Battery, Loaded Rear lb kg 3135 1426 3312 1505
34 Axle Load with Max Front lb kg 5057 2296 5091 2308
Battery, Unloaded Rear lb kg 6773 3074 7314 3317
36 Tires Size Front in mm 21x7x15 533x178x381 21x8x15 533x203x381
37 Size Rear in mm 16x6x10.5 406x152x267 16x6x10.5 406x152x267
38 Wheelbase in mm 54.7 1390 54.7 1390
39 Tread/Track Width Front Standard / Rear in mm 36.9/36 937/914 37.9/36 965/914
Chassis

Front Optional / Rear in mm 40.5/36 1029/914 39.5/36 1005/914

40 Ground Clearance, Loaded Lowest Point in mm 3 76 3 76
41 Center of Wheelbase in mm 4.8 122 4.8 122
42 Grade Clearance, Loaded % 35 35
43 Brakes Service Foot - Motor
44 Parking Auto - Electric
45 Battery†† Type Lead Acid
46 Capacity - 36V 5hr Rating @ 30°C AH 1615 1400
Capacity - 36V 6hr Rating @ 25°C AH 1650 1430
kWh 57.9 50.2
Capacity - 48V 5hr Rating @ 30°C 1180 1075
Capacity - 48V 6hr Rating @ 25°C AH 1210 1100
Battery

kWh 56.6 51.5

47 Weight - Min lb kg 3100 1410 2800 1270
Weight - Max lb kg 4250 1930 4000 1815
Size - Max Length 36.38 924 32.94 837
Width 38.69 983 38.69 983
Height 22.25 565 22.25 565
Cable Lead Length/Connector Pos. in mm 18/A 455/A 18/A 455/A
48 Battery Floor Height With Rollers / w/o Rollers in mm 17.4/17.1 442/434 17.4/17.1 442/434
49 Motors Dual Tractor Motors, dia in mm 8.9 225 8.9 225
Motors

50 Lift Motor, dia in mm 7.2 183 7.2 183

51 Operating Pressure For Attachments psi bar Up to 3000 Up to 207 Up to 3000 Up to 207
* Optional masts, attachments, longer load dimensions and higher lifting heights may result in derating of the capacity. Contact local dealer.
** Forward tilt restricted to 2° above this height.
*** Add 1.9” (47 mm) for class II & III Crown integrated sideshifts, add 2.3” (59 mm) for class II hang-on sideshift, and add 2.5” (64 mm) for class III hang-on sideshift.
† Based on TT mast.
†† With maintenance-free batteries or batteries with a lid (flat top), consult factory.

 FC 5200 Series Specifications

Imperial Metric Imperial Metric

1 Manufacturer Crown Equipment Corporation
General Information

2 Model FC 5245-55 FC 5225-60

3 Load Capacity* lb kg 5500 2490 6000 2720
4 Load Center Fork Face to Load CG in mm 24 600 24 600
5 Power Electric 36-Volt / 48-Volt
6 Operator Type Sit-down Rider Counterbalanced
7 Tire Type Cushion
8 Wheels (x = driven) Number Front/Rear 2x/2
9 Mast (See Mast Chart) Lifting Height (MFH) in mm 188 4775 180 4570
Free Lift Height in mm 32.2 815 32.2 815
12 Fork Carriage ITA Class II ITA Class III
13 Forks Standard L x W x T in mm 36x5x1.8 915x127x46 36x5x1.8 915x127x46
30, 40, 760, 1015,
40, 42, 1015, 1065,
Optional Lengths 42, 48, 1065, 1220,
in mm 48, 54, 1220, 1370,
54, 60, 1370, 1525,
60, 72 1525, 1825
72 1825
14 Tilt F° / B° degree 5/5
Dimensions

Interlocked Fork Height** in mm 66 1675 66 1675

Battery Compartment Nominal in mm 36 914 33 838
15 Headlength*** Length to Fork Face in mm 90.7 2305 87.9 2235
16 Width Overall Standard Tread in mm 45.7 1160 45.7 1160
Wide Tread in mm 48 1220 48 1220
17 Height with Load Backrest Mast Collapsed in mm 83 2105 83 2105
18 Mast Extended in mm 236 5995 228 5795
20 SIP to Bottom of OHG Std / Suspension in mm 36.1/35.8 918/910 36.1/35.8 918/910
(86" [2184 mm] Tall OHG)
21 Turning Radius in mm 77.7 1975 74.9 1905
22 Load Distance*** Center of Wheel to Fork Face in mm 15.8 400 16.1 410
23 Aisle Width Right Angle Stack in mm 93.5 2385 91 2315
(Add Load + Clear)
24 Speed Travel Empty / Loaded 48V mph km/h 12.3/11.0 19.7/17.7 12.3/11.0 19.7/17.7
Performance

Empty / Loaded 36V mph km/h 11.0/10.0 17.7/16.1 11.0/10.0 17.7/16.1

25 Speed Lift† Empty / Loaded 48V fpm m/s 115/97 0.58/0.49 115/92 0.58/0.47
Empty / Loaded 36V fpm m/s 115/69 0.58/0.35 115/64 0.58/0.33
26 Speed Lower Empty / Loaded (Manual Hyd) fpm m/s 90/90 0.46/0.46 90/90 0.46/0.46
Empty / Loaded (EPV Hyd) fpm m/s 100/100 0.51/0.51 100/100 0.51/0.51
32 Weight, Less Battery lb kg 8305 3770 8795 3990
Weights

33 Axle Load with Max Front lb kg 14362 6509 15656 7099

Battery, Loaded Rear lb kg 3693 1681 3139 1426
34 Axle Load with Max Front lb kg 4860 2207 5257 2385
Battery, Unloaded Rear lb kg 7695 3493 7538 3420
36 Tires Size Front in mm 21x8x15 533x203x381 21x8x15 533x203x381
37 Size Rear in mm 16x6x10.5 406x152x267 16x6x10.5 406x152x267
38 Wheelbase in mm 54.7 1390 54.7 1390
39 Tread/Track Width Front Standard / Rear in mm 37.9/36 965/914 37.9/36 965/914
Chassis

Front Optional / Rear in mm 39.5/36 1005/914 39.5/36 1005/914

40 Ground Clearance, Loaded Lowest Point in mm 3 76 3 76
41 Center of Wheelbase in mm 4.8 122 4.8 122
42 Grade Clearance, Loaded % 35 35
43 Brakes Service Foot - Motor
44 Parking Auto - Electric
45 Battery†† Type Lead Acid
46 Capacity - 36V 5hr Rating @ 30°C AH 1615 1400
Capacity - 36V 6hr Rating @ 25°C AH 1650 1430
kWh 57.9 50.2
Capacity - 48V 5hr Rating @ 30°C AH 1180 1075
Capacity - 48V 6hr Rating @ 25°C AH 1210 1100
Battery

kWh 56.6 51.5

47 Weight - Min lb kg 3100 1410 2800 1270
Weight - Max lb kg 4250 1930 4000 1850
Size - Max Length 36.38 924 32.94 837
Width 38.69 983 38.69 983
Height 22.25 565 22.25 565
Cable Lead Length/Connector Pos. in mm 18/A 455/A 18/A 455/A
48 Battery Floor Height With Rollers / w/o Rollers in mm 17.4/17.1 442/434 17.4/17.1 442/434
49 Motors Dual Tractor Motors, dia in mm 8.9 225 8.9 225
Motors

50 Lift Motor, dia in mm 7.2 183 7.2 183

51 Operating Pressure For Attachments psi bar Up to 3000 Up to 207 Up to 3000 Up to 207

* Optional masts, attachments, longer load dimensions and higher lifting heights may result in derating of the capacity. Contact local dealer.
** Forward tilt restricted to 2° above this height.
*** Add 1.9” (47 mm) for class II & III Crown integrated sideshifts, add 2.3” (59 mm) for class II hang-on sideshift, and add 2.5” (64 mm) for class III hang-on sideshift.
† Based on TT mast.
†† With maintenance-free batteries or batteries with a lid (flat top), consult factory.

 FC 5200 Series Specifications

Imperial Metric Imperial Metric

1 Manufacturer Crown Equipment Corporation
General Information

2 Model FC 5245-60 FC 5245-65

3 Load Capacity* lb kg 6000 2720 6500 2945
4 Load Center Fork Face to Load CG in mm 24 600 24 600
5 Power Electric 36-Volt / 48-Volt
6 Operator Type Sit-down Rider Counterbalanced
7 Tire Type Cushion
8 Wheels (x = driven) Number Front/Rear 2x/2
9 Mast (See Mast Chart) Lifting Height (MFH) in mm 180 4570 171 4340
Free Lift Height in mm 32.2 815 32.2 815
12 Fork Carriage ITA Class III
13 Forks Standard L x W x T in mm 36x5x1.8 915x127x46 36x5x1.8 915x127x46
40, 42, 1015, 1065, 42, 48, 1065, 1220,
Optional Lengths in mm 48, 54, 1220, 1370, 60, 72, 1525, 1825,
60, 72 1525, 1825 84 2135
14 Tilt F° / B° degree 5/5
Dimensions

Interlocked Fork Height** in mm 66 1675 66 1675

Battery Compartment Nominal in mm 36 914 36 914
15 Headlength*** Length to Fork Face in mm 91.0 2315 91.0 2315
16 Width Overall Standard Tread in mm 45.7 1160 45.7 1160
Wide Tread in mm 48 1220 48 1220
17 Height with Load Backrest Mast Collapsed in mm 83 2105 83 2105
18 Mast Extended in mm 228 5795 219 5565
20 SIP to Bottom of OHG Std / Suspension in mm 36.1/35.8 918/910 36.1/35.8 918/910
(86" [2184 mm] Tall OHG)
21 Turning Radius in mm 77.7 1975 77.7 1975
22 Load Distance*** Center of Wheel to Fork Face in mm 16.1 410 16.1 410
23 Aisle Width Right Angle Stack in mm 93.8 2385 93.8 2385
(Add Load + Clear)
24 Speed Travel Empty / Loaded 48V mph km/h 12.3/11.0 19.7/17.7 12.3/11.0 19.7/17.7
Performance

Empty / Loaded 36V mph km/h 11.0/10.0 17.7/16.1 11.0/10.0 17.7/16.1

25 Speed Lift† Empty / Loaded 48V fpm m/s 115/92 0.58/0.47 115/80 0.58/0.41
Empty / Loaded 36V fpm m/s 115/64 0.58/0.33 115/58 0.58/0.29
26 Speed Lower Empty / Loaded (Manual Hyd) fpm m/s 90/90 0.46/0.46 90/90 0.46/0.46
Empty / Loaded (EPV Hyd) fpm m/s 100/100 0.51/0.51 100/100 0.51/0.51
32 Weight, Less Battery lb kg 8375 3800 9035 4100
Weights

33 Axle Load with Max Front lb kg 15350 6962 16375 7423

Battery, Loaded Rear lb kg 3275 1488 3410 1552
34 Axle Load with Max Front lb kg 4951 2248 5110 2320
Battery, Unloaded Rear lb kg 7674 3482 8175 3710
36 Tires Size Front in mm 21x8x15 533x203x381 21x8x15 533x203x381
37 Size Rear in mm 16x6x10.5 406x152x267 16x6x10.5 406x152x267
38 Wheelbase in mm 54.7 1390 54.7 1390
39 Tread/Track Width Front Standard / Rear in mm 37.9/36 965/914 37.9/36 965/914
Chassis

Front Optional / Rear in mm 39.5/36 1005/914 39.5/36 1005/914

40 Ground Clearance, Loaded Lowest Point in mm 3 76 3 76
41 Center of Wheelbase in mm 4.8 122 4.8 122
42 Grade Clearance, Loaded % 35 35
43 Brakes Service Foot - Motor
44 Parking Auto - Electric
45 Battery†† Type Lead Acid
46 Capacity - 36V 5hr Rating @ 30°C 1615 1615
Capacity - 36V 6hr Rating @ 25°C AH 1650 1650
kWh 57.9 57.9
Capacity - 48V 5hr Rating @ 30°C 1180 1180
Capacity - 48V 6hr Rating @ 25°C AH 1210 1210
Battery

kWh 56.6 56.6

47 Weight - Min lb kg 3100 1410 3100 1410
Weight - Max lb kg 4250 1930 4250 1930
Size - Max Length 36.38 924 36.38 924
Width 38.69 983 38.69 983
Height 22.25 565 22.25 565
Cable Lead Length/Connector Pos. in mm 18/A 455/A 18/A 455/A
48 Battery Floor Height With Rollers / w/o Rollers in mm 17.4/17.1 442/434 17.4/17.1 442/434
49 Motors Dual Tractor Motors, dia in mm 8.9 225 8.9 225
Motors

50 Lift Motor, dia in mm 7.2 183 7.2 183

51 Operating Pressure For Attachments psi bar Up to 3000 Up to 207 Up to 3000 Up to 207

* Optional masts, attachments, longer load dimensions and higher lifting heights may result in derating of the capacity. Contact local dealer.
** Forward tilt restricted to 2° above this height.
*** Add 1.9” (47 mm) for class II & III Crown integrated sideshifts, add 2.3” (59 mm) for class II hang-on sideshift, and add 2.5” (64 mm) for class III hang-on sideshift.
† Based on TT mast.
†† With maintenance-free batteries or batteries with a lid (flat top), consult factory.

 FC 5200 Series Specifications

Mast Chart FC 5200-40/50/55 TL TRUCKERS MAST

9 Lifting Height in mm 68 1725 76 1930 80 2030 82 2080 112 2840
Dimensions

11 Free Lift Height in mm 5.8 145 5.8 145 5.8 145 5.8 145 5.8 145
14 Interlocked Fork Ht in mm na na na na na na na na na na
17 Mast Collapsed Ht in mm 54 1370 58 1470 60 1520 61 1545 76 1930
18 Mast Extended Ht† in mm 98 2489 106 2692 110 2794 112 2845 142 3607

Mast Chart FC 5200-40/50/55 TL

9 Lifting Height in mm 126 3200 138 3505 150 3810 155 3935 159 4040 170 4320 183 4650 194 4930
Dimensions

11 Free Lift Height† in mm 5.6 140 5.6 140 5.6 140 5.6 140 5.6 140 5.6 140 5.6 140 5.6 140
14 Interlocked Fork Ht in mm 78 1980 78 1980 78 1980 78 1980 78 1980 78 1980 78 1980 78 1980
17 Mast Collapsed Ht in mm 83 2105 89 2260 95 2410 101 2565 107 2720 113 2870 119 3025 125 3175
18 Mast Extended Ht† in mm 174 4420 186 4725 198 5030 203 5155 207 5260 218 5540 231 5870 242 6150

Mast Chart FC 5200-40/50/55 TF

9 Lifting Height in mm 114 2895 126 3200 138 3505 150 3810 162 4110 174 4415 184 4670 196 4975
Dimensions

11 Free Lift Height† in mm 26.2 665 32.2 815 38.2 970 44.2 1120 50.2 1275 56.2 1425 62.2 1580 68.2 1730
14 Interlocked Fork Ht in mm 60 1525 66 1675 72 1830 78 1980 84 2135 90 2285 86 2440 102 2590
17 Mast Collapsed Ht in mm 77 1955 83 2110 89 2260 95 2415 101 2565 107 2720 113 2870 119 3025
18 Mast Extended Ht† in mm 162 4115 174 4420 186 4725 198 5030 210 5335 222 5640 232 5895 244 6200

Mast Chart FC 5200-40/50/55 TT

9 Lifting Height in mm 188 4775 206 5230 216* 5485* 231* 5865* 246* 6245* 258* 6555* 276* 7010* 291* 7390*
Dimensions

11 Free Lift Height† in mm 32.2 815 38.2 970 44.2 1120 50.2 1275 56.2 1425 62.2 1580 68.2 1730 74.2 1885
14 Interlocked Fork Ht in mm 66 1675 72 1830 78 1980 84 2135 90 2285 96 2440 102 2590 108 2745
17 Mast Collapsed Ht in mm 83 2110 89 2260 95 2415 101 2565 107 2720 113 2870 119 3025 125 3175
18 Mast Extended Ht† in mm 236 5995 254 6450 264 6705 279 7085 294 7465 306 7775 324 8230 339 8610

Mast Chart FC 5200-40/50/55 QUAD

9 Lifting Height in mm 240* 6095* 258* 6550* 276* 7010* 294* 7465* 312* 7925*
Dimensions

11 Free Lift Height† in mm 31.8 805 39.8 1010 43.8 1110 49.8 1265 55.8 1415
14 Interlocked Fork Ht in mm 76 1930 82 2085 88 2235 94 2390 100 2540
17 Mast Collapsed Ht in mm 83 2105 89 2260 95 2410 101 2565 107 2720
18 Mast Extended Ht† in mm 288 7315 306 7775 324 8230 342 8690 360 9145

* Wide tread drive tires recommended. Refer to capacity charts.

† Includes 48" (1220 mm) high load backrest.
 FC 5200 Series Specifications

Mast Chart FC 5200-60 TL TRUCKERS MAST

9 Lifting Height in mm 60 1520 68 1725 72 1825 100 2540
Dimensions

11 Free Lift Height in mm 5.8 145 5.8 145 5.8 145 5.8 145
14 Interlocked Fork Ht in mm na na na na na na na na
17 Mast Collapsed Ht in mm 54 1370 58 1470 60 1520 74 1875
18 Mast Extended Ht† in mm 96 2438 104 2642 108 2743 136 3454

Mast Chart FC 5200-60 TL

9 Lifting Height in mm 118 2995 130 3300 142 3605 150 3810 159 4040 170 4320
Dimensions

11 Free Lift Height† in mm 5.9 150 5.9 150 5.9 150 5.9 150 5.9 150 5.9 150
14 Interlocked Fork Ht in mm 78 1980 78 1980 78 1980 78 1980 78 1980 78 1980
17 Mast Collapsed Ht in mm 83 2105 89 2260 95 2410 101 2565 107 2720 113 2870
18 Mast Extended Ht† in mm 166 4220 178 4525 190 4830 198 5030 207 5260 218 5540

Mast Chart FC 5200-60 TF

9 Lifting Height in mm 108 2740 120 3045 132 3350 143 3630 155 3935 167 4240 177 4495
Dimensions

11 Free Lift Height† in mm 26.2 665 32.2 815 38.2 970 44.2 1120 50.2 1275 56.2 1425 62.2 1580
14 Interlocked Fork Ht in mm 56 1420 62 1575 68 1730 74 1880 80 2030 86 2185 92 2335
17 Mast Collapsed Ht in mm 77 1955 83 2105 89 2260 95 2410 101 2565 107 2720 113 2870
18 Mast Extended Ht† in mm 156 3960 168 4265 180 4570 191 4850 203 5155 215 5460 225 5715

Mast Chart FC 5200-60 TT

9 Lifting Height in mm 180 4570 198 5025 208* 5280* 223* 5660* 238* 6045* 250* 6350*
Dimensions

11 Free Lift Height† in mm 32.2 815 38.2 970 44.2 1120 50.2 1275 56.2 1425 62.2 1580
14 Interlocked Fork Ht in mm 62 1575 68 1730 74 1880 80 2030 86 2185 92 2335
17 Mast Collapsed Ht in mm 83 2105 89 2260 95 2410 101 2565 107 2720 113 2870
18 Mast Extended Ht† in mm 228 5795 246 6250 256 6505 271 6885 286 7265 298 7570

* Wide tread drive tires recommended. Refer to capacity charts.

† Includes 48" (1220 mm) high load backrest.
 FC 5200 Series Specifications

Mast Chart FC 5200-65 TL TRUCKERS MAST

9 Lifting Height in mm 57 1445 65 1650 69 1750 97 2465
Dimensions

11 Free Lift Height in mm 5.8 145 5.8 145 5.8 145 5.8 145
14 Interlocked Fork Ht in mm na na na na na na na na
17 Mast Collapsed Ht in mm 54 1370 58 1470 60 1520 74 1875
18 Mast Extended Ht† in mm 93 2362 101 2565 105 2667 133 3377

Mast Chart FC 5200-65 TL

9 Lifting Height in mm 115 2920 126 3200 139 3530 150 3810 159 4040 170 4320
Dimensions

11 Free Lift Height† in mm 5.9 150 5.9 150 5.9 150 5.9 150 5.9 150 5.9 150
14 Interlocked Fork Ht in mm 78 1980 78 1980 78 1980 78 1980 78 1980 78 1980
17 Mast Collapsed Ht in mm 83 2105 89 2260 95 2410 101 2565 107 2720 113 2870
18 Mast Extended Ht† in mm 163 4140 174 4420 187 4750 198 5030 207 5260 218 5540

Mast Chart FC 5200-65 TF

9 Lifting Height in mm 105 2665 117 2970 129 3275 141 3580 153 3885 165 4190 175 4445
Dimensions

11 Free Lift Height† in mm 26.2 665 32.2 815 38.2 970 44.2 1120 50.2 1275 56.2 1425 62.2 1580
14 Interlocked Fork Ht in mm 56 1420 62 1575 68 1730 74 1880 80 2030 86 2185 92 2335
17 Mast Collapsed Ht in mm 77 1955 83 2105 89 2260 95 2410 101 2565 107 2720 113 2870
18 Mast Extended Ht† in mm 153 3885 165 4190 177 4495 189 4800 201 5105 213 5410 223 5665

Mast Chart FC 5200-65 TT

9 Lifting Height in mm 171 4340 189 4800 199 5055 214 5435 229 5815 241 6120
Dimensions

11 Free Lift Height† in mm 32.2 815 38.2 970 44.2 1120 50.2 1275 56.2 1425 62.2 1580
14 Interlocked Fork Ht in mm 62 1575 68 1730 74 1880 80 2030 86 2185 92 2335
17 Mast Collapsed Ht in mm 83 2105 89 2260 95 2410 101 2565 107 2720 113 2870
18 Mast Extended Ht† in mm 219 5565 237 6020 247 6275 262 6655 277 7035 289 7340

* Wide tread drive tires recommended. Refer to capacity charts.

† Includes 48" (1220 mm) high load backrest.
 FC 5200 Series Technical Information

Standard Features 8. Crown display 16. Keyless on/off switch Driveability

1. Crown’s Access 1 2 3® • Battery discharge indicator The FC 5200 benefits from
17. Work lights
Comprehensive with lift interrupt and Crown’s design and engineering
System Control 18. Storage tray with excellence. Numerous features
re-key feature clipboard support
2. Intrinsic Stability System™ improve operator comfort
• Hour meters/travel 19. Suspension Seat - and productivity.
• Travel speed reduction and distance/stop watch fabric or vinyl
appropriate brake control • Pin code access capable A low 18" (460 mm) step height
when forks are above free lift 20. Tilt Position Assist first greets the operator. A low,
• Event code display with 21. Back-up, brake and tail lights streamlined battery cover helps
• Forward tilt interlock above five (5) key navigation
free lift 22. Strobe lights the operator glide into the truck’s
• Access 1 2 3 diagnostics seat. The overhead guard is shaped
• Counterweight designed for 23. Floor spot light
• P1, P2, P3 Performance to open up the entry/exit window
optimal stability 24. Audible travel alarm
tuning and its tubular design provides a
• Ramp speed control 25. Tow pin comfortable hand grip location for
• Forward/reverse indicator a variety of operator heights. The
• Cornering speed control 26. Brake activated
9. High visibility mast with compact tilt steer column and steer
• Hill hold in-line hose routing traction cutout wheel further facilitate entry/exit. Tilt
3. e-GEN® braking system 10. Waterfall design 27. Foot operated column is spring loaded to easily
with automatic parking brake overhead guard directional control move up and away. Floorboard
4. Operator entry/exit 28. Full battery side doors is uncluttered and rubber covered
11. Lift out or side removal to insulate the operator from
• 18" (460 mm) step height battery access 29. Battery compartment rollers vibration. Sculpted floorboard
• Large entry/exit “window” 12. Battery side retainer 30. Pos/Neg accessory cable design promotes visibility to the
• Tubular overhead guard with interlock and 31. Wide tread widths drive tires, which can reduce
upright for easy hand hold fault identification product and pallet damage.
32. Load backrest heights Brake pedal effort is reduced.
• Contoured battery 13. No tool lift out floorboards
33. Drive-in rack Pedal to pedal and floor to pedal
seat deck 14. 48" (1220 mm) high overhead guard relationships are refined for comfort.
• Rounded floorboard edges load backrest
34. Non-marking smooth or Better visibility can be seen
• Tilt steering wheel and 15. 350 amp battery connector lug rubber tires everywhere you look. A low cowl
sculpted column 16. Color-coded wiring 35. Work Assist® Accessories for fork and carriage visibility, a
• Large, uncluttered floorboard 17. InfoPoint® System with • Clip Pad high visibility mast, a compact steer
5. Operator compartment Quick Reference Guide column, a sculpted floorboard and
• Hook
design features 18. Three-spool valve a “waterfall” overhead guard all
• Storage Net contribute to superior visibility.
• Low cowl for fork and 19. O-ring face seal • Storage Bin
floor visibility hydraulic fittings Control handles are crafted into
• Seat Deck Clip
• Wide visibility window 20. Battery disconnect handle the compartment and “fanned” for
• Accessory clamp easy selection. They include tactile
between overhead guard 21. Lift interrupt
and front pillars • Terminal mounting feedback for comfort and easy
22. AC hydraulics and • Fire extinguisher selection. Control actuation forces
• Crown FlexSeat™- fabric on-demand steering
• Operator fan are minimal and responsive.
with hip restraint and
anti-cinch seatbelt. Optional Equipment • Work lights Battery disconnect is easy to
• Infinite adjustment steering 1. Integral or hook on sideshifter • Mirrors reach and operate. Easy to
wheel column 2. Freezer and corrosion actuate rocker-type switches are
• Shrink wrap holder
conditioning conveniently located to select
• Nylon control handles with • Cup holder optional work lights or fan. A large
tactile feedback 3. UL “EE” rating
• Pencil holder convex horn button is housed in
• Natural position for forward/ 4. Quick Charge (1 or 2 the center of the wheel.
reverse selector connectors on seatdeck) 36. Battery spacer
• Rubber floor mat/rubber 5. InfoLink® Ready System 37. Crown FlexSeat - vinyl
covered pedals 6. TL, TF and Quad mast styles 38. Rear post handle with
• Sculpted counterweight for horn button
7. TL Truckers Mast
rearward visibility 39. Fingertip or dual joystick
8. Polished and tapered forks hydraulic controls
6. Crown-manufactured drive and
lift motors 9. Fork lengths 40. Swivel Seat
7. 36/48-volt system 10. Hydraulic valves for 41. Lights on with Keyswitch
attachments
42. Attachments:
11. Quick disconnect
hydraulic connectors • Carton Clamp
12. Attachment pressure regulator • Fork Positioner
and gauge • Push Pull
13. Special forward tilt • Single/Double
14. Adjustable armrest 43. OHG Covers
15. Steering spinner knob • Plexi-glass
• 2x2 wire mesh
 FC 5200 Series Technical Information

Crown Drive System spindle and kingpin in tapered The steel oil reservoir is integral Carriage
Crown has applied the latest roller bearings for improved life to the frame which helps to An ITA Class II or III is standard.
generation AC drive system, and serviceability. Spherical dissipate hydraulic oil heat. This An optional Crown integral
enhanced with Access 1 2 3® bearings with tapered pins in clean, leak-free design includes sideshifter and hook on type ITA
technology. Crown-manufactured, connecting links eliminate any suction strainer with separate, sideshifters or other attachments
independently controlled, AC drive play in linkage. All bearing easily accessible fill port and can be easily added. Optional fork
motors are specifically designed locations are sealed to exclude dipstick with filtered breathers. lengths are available.
to optimize system integration contaminants and are equipped Oil is returned through a
Drive Units
between the traction and braking with lubrication fittings for ease. replaceable spin-on type oil
Two Crown-manufactured
controls. The demand for filter. The hydraulic system
Load-sense hydrostatic steering independent double reduction
high efficiency systems that provides continuous filtration.
is an on-demand system which planetary gear drive offers 22 to
closely match customer torque 1 gear reduction. The first and
reduces energy consumption. Crown Manufactured
requirements is met with this second reduction use helical
Smooth, quiet steering control Mast Assembly
generation control system. gears for low-noise and efficiency.
with minimal operator effort The mast has four points of
Crown’s Access 1 2 3 technology required at the steer tiller. attachment to the truck for good The drive unit gears are splash
provides optimum performance load force distribution. Two lubricated in an oil bath.
and control by offering a The steering geometry is matched mounting points are at the frame,
to the controller to deliver smooth Warning Device Options
communication interface for where tilt cylinders attach. Tilt
steering at all angles. The advan- 1. Audible travel alarm
both operators and technicians, cylinders use spherical bushings
intelligent coordination of lift truck tage is less tire scrubbing which to resist off center load distortions. 2. Flashing lights
systems and simplified service extends tire life. Two large diameter studs secure Safety considerations and dangers
with advanced diagnostics. the mast to the drive units. associated with audible travel
Both motors receive power, even
in the tightest turns. This helps alarms and flashing lights include:
The Crown display is used for High visibility mast features
easy troubleshooting, access the truck to accelerate, turn and nested-rail design with lift • Multiple alarms and/or lights
event history and set performance maneuver even from a full turn cylinders positioned behind can cause confusion.
features. A distribution panel is start position. the rails. Heavy-duty mast is • Workers ignore the alarms
conveniently located with all test engineered to provide smooth and/or lights after day-in and
Cornering speed control
points, control fuses and central reliable operation. Large hydraulic day-out exposure.
regulates the drive motor’s
wiring for easy troubleshooting. hose reeves and hose placement
output by the turning degree of • Operator may transfer the
are engineered to reduce hose
Three modes of performance the truck. The advantage is responsibility for “looking out”
wear and increase hose life. Hose
can be selected to accommo- smooth, stable steering which to the pedestrians.
routing places hoses in-line versus
date operator experience or may increase operator confidence
side-by-side to reduce visual • Annoys operators and
application requirements. and productivity.
interference. Large lift chains are pedestrians.
Hydraulics used for long reliable service life.
e-GEN® Braking System
Premium hydraulic function Large diameter lift cylinders provide Other Options Available
Variable regenerative motor
control valve provides precise smooth operation. Contact your local Crown dealer.
braking is optimized and
assisted with electric friction metering of lift, tilt and accessory
Optional TL, TF and quad mast is Dimensions and performance
brakes, eliminating maintenance functions. Compensating section
available. data given may vary due to
associated with typical wet, disk in the valve provides repeatable
function speed regardless of manufacturing tolerances.
or drum and shoe style brakes. Batteries Performance is based on an
The appropriate amount of load condition. Hydraulic lever Battery deck lid releases easily to
actuation is minimal, reducing average size vehicle and is
stopping force is applied to match expose battery for lift out or side affected by weight, condition
operator brake input and the stress. Compensating section also battery removal. Optional battery
improves overall system efficiency. of truck, how it is equipped and
current operating conditions rollers for use with mechanized the conditions of the operating
of the truck. extraction equipment. A low area. Crown products and
Tilt compensator prevents tilt
battery side retainer is standard. specifications are subject to
The closed loop Access 1 2 3 from lunging or speeding up when
Full battery side doors are optional. change without notice.
traction control will keep the doing simultaneous functions.
truck static until a travel input is Crown lift/tilt interlock system
requested, even when operating provides extended forward tilt
on a grade. at low fork heights, reduced
Automatic electric parking brakes forward tilt at elevated heights
activate when the operator leaves to improve truck stability when
the seat, a travel input has not forks are elevated.
been requested or battery power The control valves’ modular
has been disconnected. design allows easy addition of
Steering System accessory functions. Maximum Crown Equipment Corporation
Full hydrostatic system with equal lowering speed is limited by New Bremen, Ohio 45869 USA
area, double-acting cylinder pressure compensating flow Tel 419-629-2311
provides equally responsive control valve and velocity fuses.
Fax 419-629-3796
steering rate both ways (4.8 turns Integrated hydraulic cylinder
cushions soften mast staging. All crown.com
lock to lock). Rugged axle frame;
forged spindle and connecting lift cylinder rams are plated and
links eliminate the need for retract into the hydraulic oil for You can count on Crown to build lift trucks Because Crown is continually improving its products,
specifications are subject to change without notice.
adjustment. One-piece forged additional corrosion protection designed for safe operation, but that’s
when forks are lowered. only part of the safety equation. Crown Crown, the Crown logo, the color beige,
the Momentum symbol, Access 1 2 3, e-GEN,
encourages safe operating practices through InfoPoint, Intrinsic Stability System, FlexSeat,
ongoing operator training, safety-focused InfoLink and Work Assist are trademarks of
Crown Equipment Corporation.
supervision, maintenance and a safe working
Copyright 2016-2019 Crown Equipment Corporation
environment. Go to crown.com and view our
SF19377 Rev. 01-19
safety section to learn more. Printed in U.S.A.