Certificate No:
TAE0000333
TYPE APPROVAL CERTIFICATE
This is to certify:
That the Electric Power Cable
with type designation(s)
BFOU P105 & BFCU & BFMU 0,6/1 kV
Issued to
Seoul Electric Wire Co., Ltd.
Eumseong-gun, Chungcheongbuk-do, Republic of Korea
is found to comply with
DNV GL rules for classification – Ships, offshore units, and high speed and light craft
IEC 60092-353 (2016-09)
Application :
General power and lighting, Control, Fire resistance, Flame retardant Cat.A, Halogen free, Low
smoke, Cold bend(-40°C) Cold impact(-35°C)
Product(s) approved by this certificate is/are accepted for installation on all vessels classed
by DNV GL.
Rated voltage (kV) 0,6/1
Temp. class (°C) 90
Issued at Busan on 2018-08-14
This Certificate is valid until 2022-12-31. for DNV GL
DNV GL local station: Seoul
Approval Engineer: Eun Sook Kim
Andreas Kristoffersen
Head of Section
This Certificate is subject to terms and conditions overleaf. Any significant change in design or construction may render this Certificate invalid.
The validity date relates to the Type Approval Certificate and not to the approval of equipment/systems installed.
Form code: TA 251 Revision: 2016-12 www.dnvgl.com Page 1 of 3
© DNV GL 2014. DNV GL and the Horizon Graphic are trademarks of DNV GL AS.
Job Id: 262.1-006082-3
Certificate No: TAE0000333
Product description
Type: BFOU P105 & BFCU & BFMU 0,6/1 kV
Construction:
Conductors: Tin-coated annealed copper Class 2 or Class 5
Core insulation: Mica/glass tape + EPR
Inner covering: Halogen free compound
Metal covering: Tinned copper wire braid (O) or Galvanized steel wire braid (C) or
Copper alloy wire braid (M)
Outer sheath: SHF2 (no marking) or SHF Mud (E or M)
Number of cores Conductor cross-section (mm2)
1C 1 ~ 630
2C, 3C 1 ~ 300
2C+E, 3C+E 1 ~ 16
4C 1 ~ 240
5~44C 1.0, 1.5, 2.5
2C+E, 3C+E, 4C+E 25 ~ 240 / 16 ~ 120
Application/Limitation
This type of cable is fire resistant in accordance with IEC Publication 60331.
The requirements of SOLAS Chapter II-1 Part D Reg. 45.5.2 to limit Fire Propagation along Bunches of
Cables or Wires are fulfilled without any additional measures.
Type Approval documentation
Tests carried out
Standard Release General description Limitation
IEC 60092-350 2014-08 General construction and test methods of
power, control and instrumentation cables
for shipboard and offshore applications
IEC 60092-353 2016-09 Power cables for rated voltages 1 kV and 3
kV
IEC 60092-360 2014-04 Insulating and sheathing materials for
shipboard and offshore units, power, control,
instrumentation, telecommunication cables
IEC 60331-1/-2 2009-05 Fire resistance / Circuit integrity – Test 120 min.
method for fire with shock at temperature of
at least 830ºC for cables rated up to and
including 0,6/1 kV
IEC 60332-1 2015-07 Test for vertical flame propagation for a
single insulated wire or cable
IEC 60332-3-22 2009-02 Tests on electric and optical fibre cables Bunch test
under fire conditions - Part 3-22: Test for Category A
vertical flame spread of vertically-mounted
bunched wires or cables - Category A
IEC 60684-2 2011-08 Flexible insulating sleeving – Part 2: Fluorine content
Methods of test. <0.1%
IEC 60754-1 2014-05 Test on gases evolved during combustion of Low Halogen
materials from cables – Determination of the <0,5%
amount of halogen acid gas
IEC 60754-2 2014-05 Test on gases evolved during combustion of Halogen free
materials from cables – Determination of the ≥4,3pH, ≤10µS/mm
degree of acidity of gases evolved during the
combustion of materials taken from electric
cables by measuring pH and condctivity
IEC 61034-1/-2 2005-04 Measurement of smoke density of cables Low smoke
burning under defined conditions – >60%
Form code: TA 251 Revision: 2016-12 www.dnvgl.com Page 2 of 3
Job Id: 262.1-006082-3
Certificate No: TAE0000333
Standard Release General description Limitation
Test apparatus, procedure and requirements
CSA C22.2 2009-09 5.11 Flexibility at any specified temperature Cold bend (-40°C)
No.0.3-09 test
CSA C22.2 2009-09 5.12 Abnormal low temperature - impact Cold impact (-35°C)
No.0.3-09
UL1581 2001 UV resistance
NEK 606 2016 Cables for offshore installations – Technical Oil & Mud resistant –
specification No marking: Cat. a
E marking: Cat. b
M marking: Cat. c
Marking of product
SEOUL ELECTRIC WIRE – 0,6/1 kV – Type designation – Size – IEC60332-3A – IEC 60331(120) – Year of
manufacture – Length – (NEK 606) – (E or M)
Periodical assessment
The scope of the retention/renewal survey is to verify that the conditions stipulated for the Type
Approval Certificate are complied with and that no alterations are made to the design and/or the
material of product.
The main elements of the survey are:
Inspection on factory samples, selected at random from the production line (where practicable)
Check of results from Production Sample Tests (PST) and Routine tests (RT) (if not available, PST
and RT are to be carried out)
Review of type approval documentation
Review of possible changes in design, material and performance
Ensuring traceability between manufacturer’s product type marking and Type Approval Certificate.
Periodical assessment is to be performed after 2 years and after 3.5 years. A renewal assessment will be
performed at renewal of the certificate.
END OF CERTIFICATE
Form code: TA 251 Revision: 2016-12 www.dnvgl.com Page 3 of 3
