MICRO PRECISION CALIBRATION CO.
, LTD VIETNAM DIVISION (ĐK 280)
NO 201, 2 FLOOR, SACOM CHIPSANG BUILDING, LOT T2-4, D1 STREET,
SAIGON HIGH TECH PARK
DISTRICT 9, HCMC VIETNAM
84 5448 2008
Certificate of Calibration
Date: March 16, 2020 Cert No. 551220083533466
Customer:
CENTRAL PHARMACEUTICAL I JSC - PHARBACO
THACH LOI, THANH XUAN, SOC SON,
HA NOI VIET NAM HA NOI
Work Order #: VN-18022360
MPC Control #: 02RBWH Serial Number: 02RBWH
Asset ID: N/A Department: N/A
Gage Type: HUMIDITY-TEMPERATURE TRANSMITTER Performed By: THU TRAN
Manufacturer: DWYER Received Condition: IN TOLERANCE
Model Number: RHP-2E44-LCD Returned Condition: IN TOLERANCE
Size: MULTIFUNCTION Cal. Date: March
N/A 16, 2020
Temp/RH: 20.3°C / 54 % Cal. Interval: 12 MONTHS
N/A
Location: Calibration performed at MPC facility Cal. Due Date: N/A 16, 2021
March
Calibration Notes:
Please refer to the attached Calibration Report (1 page).
Standards Used to Calibrate Equipment
I.D. Description. Model Serial Manufacturer Cal. Due Date Traceability #
CA4595 TEMPERATURE AND HUMIDITY SH-242 93011607 ESPEC Sep 3, 2020 551220083201432
CHAMBER
STL-0011 STANDARD THERMOMETER CHUB-E4 1529 A55885 FLUKE Jun 8, 2020 551220083094481
AT5402 PRECISION HUMIDITY H-100L 9601-V4520006 DIGILOG INSTRUMENTS Oct 10, 2020 551220083287436
CALIBRATOR USA
CA3588 HUMIDITY AND TEMPERATURE HMP76 R3210257 VAISALA Sep 11, 2021 K008-C03074
PROBE
Procedures Used in this Event
Procedure Name Description
MPC-THD-001 Rev. 01 Temperature, Humidity and Dew Point Devices, General, rev01, Jan-21-2020
Calibrating Technician: QC Approval:
THU TRAN JARROD TRAMMELL
Statements of Pass or Fail Conformance:The uncertainty of measurement has been taken into account when determining compliance with specification, as per ILAC-G8:03/2009. All measurements and test results guard banded to ensure the
probability of false-accept does not exceed 2% in compliance with ANSI/NCSL Z540.3-2006.
The status of compliance with the acceptance criteria is reported as:
PASS - Compliant with specification; .
FAIL - Not compliant with specification.
FAILz - The measured value is not within the acceptance limits. However, a portion of the expanded uncertainty of measurement at 95% is within the specified tolerance.
PASSz - The measured value is within acceptance limits. However, a portion of the expanded uncertainty of measurement at 95% exceeds the specified tolerance.
The expanded uncertainty of measurement is stated as the standard uncertainty of measurement multiplied by the coverage factor k=2, which for a normal distribution corresponds to a coverage probability of approximately 95%, unless otherwise
stated. This calibration report complies with ISO/IEC 17025:2017 and ANSI/NCSL Z540.3 Method 6-Guard Bands based on Test Uncertainty Ratio. Calibration cycles and resulting due dates were submitted/approved by the customer. Any number of
factors may cause an instrument to drift out of tolerance before the next scheduled calibration. Recalibration cycles should be based on frequency of use, environmental conditions and customer's established systematic accuracy. All standards
are traceable to SI through the National Institute of Standards and Technology (NIST) and/or recognized national or international standards laboratories. Services rendered include proper manufacturer’s service instruction and are warranted
for no less than thirty (30) days. The information on this report pertains only to the instrument identified, this may not be reproduced in part or in a whole without the prior written approval of the issuing MP Calibration Laboratory.
Page 1 of 1 (CERT, Rev 6)
