Scribd
Upload
2K views1 page

Inspection Report - Roller

This inspection report summarizes the inspection of parts from Logistics Automation Ltd. for Godrej Consoveyo. It lists 15 dimensions that were checked against specifications. The inspector checked for issues like dent marks, finish of jobs, scratch marks, anti-rust coating, edge sharpness, and other quality metrics. The inspector accepted some quantities and rejected or required rework of other quantities based on the inspection results.

Uploaded by

Suleman Khan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
2K views1 page

Inspection Report - Roller

This inspection report summarizes the inspection of parts from Logistics Automation Ltd. for Godrej Consoveyo. It lists 15 dimensions that were checked against specifications. The inspector checked for issues like dent marks, finish of jobs, scratch marks, anti-rust coating, edge sharpness, and other quality metrics. The inspector accepted some quantities and rejected or required rework of other quantities based on the inspection results.

Uploaded by

Suleman Khan
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLS, PDF, TXT or read online on Scribd
You are on page 1/ 1

INSPECTION REPORT QA Document

Logistics Automation Ltd.

Project No: Vendor: IR No:

Drawing No: Purchase Order No.: Date:

Rev: Pos.No.: Qty: Dated:- Material:-

Part Name:- Page :-

SR. Description For Dimension with Actual Dimension


Location
No. Dimension Tolerance 1 2 3 4 Remark

1 Load Bearing

2 Capacity-N

3 Maximum Speed m/s

5 Type of chain Drive

6 Fixing Ends

7 Suitable for Chain

8 No of teeth on Sprocket

9 Sprocket Pitch mm

10 Sprocket PCD mm

11 Equivalent Make/Series

12 Guide disc (Y/N)

13 Surface finish

14 ØB mm

15 C mm

Note: All dimensions are in MM except otherwise stated specifically


Material/Hardness:
Tick Marks Relevant Statement
Dent Marks NotPresent Present Bend Ok Not Ok

Finish Of Jobs (As Per Opr.) Ok Not Ok Tapping Right Ok Not Ok

Scratch Marks NotPresent Present Square ness Ok Not Ok

Anti Rust (Easy Removable) Applied Not Applied Concentricity Ok Not Ok

Edges Blunt Sharp Parallelism Ok Not Ok

Remarks: Qty. Accepted :

Qty. Rejected :

Rework Qty :

Godrej Consoveyo
Vendor
Logistics Automation Ltd.

Inspector Q.C. In charge Inspector Q.C. In charge

GCLA/MFG/F09 Revision 0 3/7/2017

You might also like