DIN 319 INOX
STAINLESS
STEEL
RoHS
2 Ball Knobs
Plastic / Steel / Aluminium / Stainless Steel
3
SPECIFICATION
Version in Plastic
4
Types
5
-- Type C: With tapped hole (no bushing)
-- Type E: With tapped bushing
Plastic KU
6
Duroplast (Phenolic PF)
-- Flash removed and polished
7
-- Black (standard color)
-- Red RT, similar RAL 3003: add RT on order code
8 Bushing (Type E)
-- Steel, zinc plated (standard)
9 -- Brass MS add MS on order code (only in black version)
Plastic KT
10 Technopolymer (Polyamide PA)
-- Shock resistant
11 -- Black, matte
-- Red RT, similar RAL 3003: add RT on order code INFORMATION
Version in Steel When ball knobs DIN 319 (Press on type) type L and M are used the
12
Types shaft does not require a thread.
-- Type C: With tapped hole During mounting, easy blows with a soft hammer are sufficient to
13
-- Type K: With plain hole H7 drive the knob into place, the shaft end should be slightly rounded
or chamfered (30°).
Steel ST
14 Before the assembly of the knobs, type L the tolerance ring is to be
Polished
inserted into the drilling. Further it is to be noted that the button is put
Version in Aluminium on perpendicular and / or axially parallel. Otherwise the knob may
15
Types break.
-- Type C: With tapped hole Type M ball knobs are a cheaper solution, however, the pulling off
16 force is less predictable.
-- Type K: With plain hole H7
Ball knobs DIN 319 made of steel, aluminum and stainless steel are
Aluminium AL
17 not on the official DIN standard sheet.
Polished
Version in Stainless Steel ON REQUEST
18 -- Red version
Types
-- Type C: With tapped hole
19 TECHNICAL INFORMATION
-- Type K: With plain hole H7
-- ISO-Fundamental Tolerances (see page A21)
Stainless Steel AISI 303 NI
20 -- Stainless Steel characteristics (see page A26)
Matte shot-blasted
-- Plastic characteristics - Duroplast (see page A2)
Version in Plastic (Press on type) -- Plastic characteristics - Technopolymer (see page A32)
21 Types
-- Type L: With tolerance ring
-- Type M: With tapered bore
5
Type L
Plastic KU
Fixed and Revolving Handles
Duroplast (Phenolic PF)
Black, shiny finish
Tolerance ring
Spring steel
Type M
Plastic KT
Technopolymer (Polyamide PA)
-- Shock resistant
-- Black, matte finish
-- Red version
3/2022 ELESA and GANTER models all rights reserved in accordance with the law.
2 Always mention the source when reproducing our drawings.
2/3
DIN 319 Ball Knobs
d1 d1
2
h
4
t1
t2
5
d2 d3
d4 d4 6
DIN 319-KU
7
Descripción d1 d2 d3 d4 ≈ h≈ t1 min. t2 min.
DIN 319-KU-10-M3-C 10 M3 - 5 9.3 5 - 1
8
DIN 319-KU-12-M4-C 12 M4 - 6 11.2 6 - 1
DIN 319-KU-16-M4-C 16 M4 - 8 15 6 6 2
9
DIN 319-KU-16-M5-C 16 M5 - 8 15 6 6 2
DIN 319-KU-20-M5-C 20 M5 - 12 18 7.5 7.5 5
DIN 319-KU-20-M6-C 20 M6 - 12 18 7.5 7.5 5 10
DIN 319-KU-25-M5-C 25 M5 - 15 22.5 9 9 10
DIN 319-KU-25-M6-C 25 M6 - 15 22.5 9 9 8 11
DIN 319-KU-25-M8-C 25 M8 - 15 22.5 9 9 9
DIN 319-KU-30-M8-C 30 M8 - 15 28 12 - 16 12
DIN 319-KU-32-M6-C 32 M6 - 18 29 12 12 21
DIN 319-KU-32-M8-C 32 M8 - 18 29 12 12 20 13
DIN 319-KU-32-M10-C 32 M 10 - 18 29 12 12 20
DIN 319-KU-35-M10-C 35 M 10 - 18 32.5 15 - 27
14
DIN 319-KU-40-M8-C 40 M8 - 22 37 15 15 40
DIN 319-KU-40-M10-C 40 M 10 - 22 37 15 15 38
15
DIN 319-KU-40-M12-C 40 M 12 - 22 37 15 15 38
DIN 319-KU-50-M12-C 50 M 12 - 28 46 18 18 87
DIN 319-KU-20-M5-E 20 - M5 12 18 7.5 7.5 7 16
DIN 319-KU-25-M6-E 25 - M6 15 22.5 9 9 12
DIN 319-KU-25-M8-E 25 - M8 15 22.5 9 9 16 17
DIN 319-KU-32-M8-E 32 - M8 18 29 12 12 25
DIN 319-KU-40-M10-E 40 - M 10 22 37 15 15 50 18
DIN 319-KU-50-M12-E 50 - M 12 28 46 18 18 110
19
DIN 319-KT
Descripción d1 d2 d3 d4 ≈ h≈ t1 min. t2 min. 20
DIN 319-KT-16-M4-C 16 M4 - 8 15 6 6 3
21
DIN 319-KT-16-M5-C 16 M5 - 8 15 6 6 2
DIN 319-KT-20-M5-C 20 M5 - 12 18 7.5 7.5 5
DIN 319-KT-20-M6-C 20 M6 - 12 18 7.5 7.5 5
5
DIN 319-KT-25-M6-C 25 M6 - 15 22.5 9 9 10
DIN 319-KT-25-M8-C 25 M8 - 15 22.5 9 9 10
Fixed and Revolving Handles
DIN 319-KT-32-M8-C 32 M8 - 18 29 12 12 20
DIN 319-KT-32-M10-C 32 M 10 - 18 29 12 12 21
DIN 319-KT-40-M10-C 40 M 10 - 22 37 15 15 40
DIN 319-KT-40-M12-C 40 M 12 - 22 37 15 15 40
DIN 319-KT-16-M4-E 16 - M4 8 15 6 6 3
DIN 319-KT-16-M5-E 16 - M5 8 15 6 6 4
DIN 319-KT-20-M5-E 20 - M5 12 18 7.5 7.5 8
DIN 319-KT-20-M6-E 20 - M6 12 18 7.5 7.5 8
DIN 319-KT-25-M6-E 25 - M6 15 22.5 9 9 14
DIN 319-KT-25-M8-E 25 - M8 15 22.5 9 9 15
DIN 319-KT-32-M8-E 32 - M8 18 29 12 12 25
DIN 319-KT-32-M10-E 32 - M 10 18 29 12 12 28
DIN 319-KT-40-M10-E 40 - M 10 22 37 15 15 54
DIN 319-KT-40-M12-E 40 - M 12 22 37 15 15 57
ELESA and GANTER models all rights reserved in accordance with the law. 3/2022
Always mention the source when reproducing our drawings. 3
3/3
DIN 319 Ball Knobs
9 DIN 319-KU modelo a Presión
Descripción d1 d2 t1 d3 ≈ h≈
10 DIN 319-KT modelo a Presión
DIN 319-KU-16-B4-L 16 B4 11 8 15 2
DIN 319-KU-20-B5-L 20 B5 13 12 18 5 Descripción d1 d4 t2 d3 ≈ h≈
11 DIN 319-KU-25-B6-L 25 B6 16 15 22.5 9 DIN 319-KT-16-B4-M 16 B4 9 8 15 3
DIN 319-KU-25-B8-L 25 B8 15 15 22.5 9 DIN 319-KT-16-B5-M 16 B5 9 8 15 5
12 DIN 319-KU-25-B10-L 25 B 10 15 15 22.5 9 DIN 319-KT-20-B5-M 20 B5 12 12 18 5
DIN 319-KU-32-B8-L 32 B8 15 18 29 21 DIN 319-KT-20-B6-M 20 B6 12 12 18 5
13 DIN 319-KU-32-B10-L 32 B 10 20 18 29 20 DIN 319-KT-25-B6-M 25 B6 16 15 22.5 10
DIN 319-KU-32-B12-L 32 B 12 20 18 29 19 DIN 319-KT-25-B8-M 25 B8 16 15 22.5 10
14 DIN 319-KU-40-B10-L 40 B 10 25 22 37 39 DIN 319-KT-32-B8-M 32 B8 17 18 29 20
DIN 319-KU-40-B12-L 40 B 12 23 22 37 38 DIN 319-KT-32-B10-M 32 B 10 17 18 29 21
DIN 319-KU-50-B12-L 50 B 12 20 28 46 86 DIN 319-KT-40-B10-M 40 B 10 22 22 37 43
15
DIN 319-KU-50-B16-L 50 B 16 23 28 46 83 DIN 319-KT-40-B12-M 40 B 12 22 22 37 40
16
d1 d1
17
18
h
h
t2
t1
19
20 d2 d3
d4 d4
* Complete with material of the Ball knobs (ST, AL or NI)
21 ST AL NI
Steel Aluminium Stainless Steel
DIN 319 STAINLESS STEEL
5
Descripción d1 d2 d3 H7 d4 ≈ h≈ t1 min. t2 min.
Fixed and Revolving Handles
DIN 319-*-16-M4-C 16 M4 - 8 15 7 9 7
DIN 319-*-20-M5-C 20 M5 - 12 18 9 11 11
DIN 319-*-25-M6-C 25 M6 - 15 22.5 11 14 22
DIN 319-*-32-M8-C 32 M8 - 18 29 14.5 17 41
DIN 319-*-40-M10-C 40 M 10 - 22 37 18 22 80
DIN 319-*-50-M12-C 50** M 12 - 27 46 21 28 173
DIN 319-*-16-B6-K 16 - B6 8 15 7 9 6
DIN 319-*-20-B8-K 20 - B8 12 18 9 11 10
DIN 319-*-25-B10-K 25 - B 10 15 22.5 11 14 18
DIN 319-*-32-B12-K 32 - B 12 18 29 14.5 17 41
DIN 319-*-40-B16-K 40 - B 16 22 37 18 22 75
DIN 319-*-50-B20-K 50 - B 20 27 46 21 28 146
** Este tamaño solo está disponible en acero e aluminio
Peso del tipo Aluminio
3/2022 ELESA and GANTER models all rights reserved in accordance with the law.
4 Always mention the source when reproducing our drawings.
