RANGER 680
Technical Specification
06269-1
2006-03-13
Rock Pilot
APPLICATION
Ranger 680 Rock Pilot is a hydraulic, self-propelled, Ranger 680 Rock Pilot has an ergonomic cabin to
self-contained, crawler based surface drilling rig increase operator's safety and visibility. The cabin is
equipped with a cabin (F.O.P.S. and R.O.P.S.) and certified for R.O.P.S. (ISO-3471 Roll-Over Protection
rod handling system. It drills vertical, inclined or hori- Structure) and F.O.P.S. (ISO-3449 Falling Object
zontal holes with a diameter of 64 - 102 mm (2 ½" - Protection Structure). Windows are laminated for
4") utilizing 38, 45 or 51 mm (1 ½", 1 ¾", or 2") ex- added safety. The noise level in the cabin is less
tension rods. than 80 dB(A). To keep dust at a minimum, the cabin
Ranger 680 Rock Pilot is equipped with HL 650, hy- is fitted with efficient filters for incoming fresh air.
draulic top hammer rock drill. With high rotation Adjustable seat, good visibility, adequate lighting and
torque, sufficient flushing and sophisticated ergo- an optimum working temperature are among the
nomic drilling control system the rig is well suited many features ensuring a good operating environ-
also in very fractured rock conditions. The rock drill ment. Drilling functions are proportionally controlled
and articulated boom are mounted on the turnable by one hydraulic joystick. Several routine functions
superstructure giving a drilling coverage of over 17 e.g. antijamming are executed automatically. There
m2 (optionally 26,4 m2). are fewer levers to make it easy to use. Driving, rear
jack and winch control can be done outside the cabin
The powerpack of Ranger 680 Rock Pilot consists of
from the optional remote control box.
a Caterpillar diesel engine and a gearbox, which di-
vides the power for hydraulic pumps and flushing air Typical applications for Ranger 680 Rock Pilot are
compressor. The powerpack is mounted crosswise road cutting, pipeline drilling and foundation drilling,
at the rear end of the superstructure to keep coun- as well as production drilling in medium size quar-
terweight on the opposite side of the boom and feed ries. Therefore Ranger 680 Rock Pilot is most often
regardless of the drilling direction. used by construction contractors, mines and quar-
ries, and also included in the equipment fleet of
rental houses as well.
1/4
Technical Specification
06269-1 RANGER 680
Rock Pilot
2006-03-13
DRILLING DIMENSIONS
90º
30º
Optional 90º
1m
1m
TRANSPORT DIMENSIONS
3600
7200
7700
3200
2590
10700
2/4
RANGER 680
Technical Specification
06269-1
2006-03-13
Rock Pilot
HYDRAULIC ROCK DRILL HYDRAULIC SYSTEM
Rock drill type HL 650 Driving, boom and drilling Load sensing system
Drill rod diameters 38, 45, 51 mm Cooling and dust collector Open center
Operating pressure 100-170 bar Filtration rate 12 micron abs., return
Percussion rate 55 Hz 25 micron, pressure
Percussion output power 17,5 kW Cooling capacity up to +45°C ambient
Maximum rotation torque 1 355 Nm Hydraulic oil tank 200 l
Shank lubrication Air / oil mist Shank lubrication device SLU 14-1
Flushing Air
Weight 245 kg CONTROL SYSTEM
Driving control Pilot operated, hydraulic
CHAIN FEED AND ROD HANDLER Boom control Direct operated, hydraulic
Drilling Pilot controlled (el/hydr.)
Chain feed type CF 145H + RH 714
Rod handler Electric remote
Length of feed 7 700 mm
Collaring control Stepless
Rock drill travel 5 020 mm Percussion control Controlled by feed
(w/o hose reel)
pressure (THC 700)
Max. length of starter rod 5485 mm (18’)
Antijamming system Hydraulic
(w/o hose reel)
Voltage 24 VDC
Feed/pull out force 20 kN
Travelling hose reel Optional
DUST COLLECTION SYSTEM
Front jaws Centralizing Pito 12H
Rod handler type RH 714 Dust collector type DC 800 H
Capacity/vacuum 23 m3/min at 1 000 mm
Storage capacity with 6+1
vacuum H2O
45 mm MF-rods Filter elements/material 13 pcs/fiber
Steel lengths 3 050, 3 660, 4 265 mm Total filter surface 10.4 m2
(10', 12', 14') Hydraulic motor output 12 kW
Max. hole depth with 29 m (7 x 14’) Weight 200 kg
4265 mm (14’) MF-rods
(w/o hose reel)
Feed extension travel 1350 mm
Feed swing -56°/+52° (-20°/+94°)
Feed tilt 125°
Weight without steels 1 200 kg
POWERPACK CARRIER
Engine type Caterpillar C 6.6 Track type FL 6
Max. tilt angles ± 45 ° Grouser plate width 310 mm
Number of cylinders 6
Ground contact length 2 590 mm
Engine output 129 kW / 2 200 rpm
Ground pressure 0.75 kg/cm2
Transmission type Gearbox
Ground clearance 440 mm
Hydraulic pumps 2 variable, displacement
Turnable superstructure 120° / 180°
piston, two gear pumps Oscillation angles ± 10°
Screw compressor type Enduro 12 Tramming force 110 kN
Air flushing capacity 6.0 m3/min Max. tramming speed 3.5 km/h
Flushing air pressure 4-10 bar
Air cleaner 2 pcs, with ejector and OPERATOR’S CABIN
safety element Cabin type Ergo
Fuel tank 350 l Certificates F.O.P.S. and R.O.P.S.
Noise level in the cabin below 80 dB(A)
Average fuel consumption 15-21 l/h
Controls Drilling, tramming, boom and
Fuel saving system Standard rod changer
Weight 1 150 kg Heaters Standard
Pressurization Standard
ARTICULATED BOOM Seat Multiposition
Vibration dampening Standard
Boom type DB 800 H
Windows Safety laminated, tinted, with
Boom length 4.8 m wipers
Drilling coverage on flat 17.6 m² (26.4 m²) Power take-off 12 VDC
Collaring height +2.5 m/-4.5 m
Horizontal holes To the right
3/4
RANGER 680
Technical Specification
06269-1
2006-03-13
Rock Pilot
STANDARD COMPONENTS TRANSPORT DIMENSIONS
1. Rock drill HL 650, hydraulic Weight (without options) 14 500 kg
2. Chain feed CF 145H Width 2.5 m
3. Rod handler RH 714 incl. 1 set of jaws Height 3.6 m / 3.2 m
4. Boom DB 800 H, articulated Total length 7.2 m / 10.7 m
5. Carrier Track mounted, turnable
superstructure
THE JAWS FOR DRILL STEELS
6. Powerpack Diesel driven, hydraulic
pumps and on-board com- Drill steel Drill steel Recommended
pressor type diameter hole diameter
7. Hydraulic system Load sensing and open Extension 38 mm 64 - 70 mm
1.
center rods 1 ½" 2 ½" - 2 ¾"
8. Control system THC 700 38 mm 64 - 70 mm
2. MF-rod
9. Operator's cabin F.O.P.S. and R.O.P.S. 1 ½" 2 ½" - 2 ¾"
10. Dust collection DC 800 H, hydraulic Extension 45 mm 76 - 89 mm
system 3.
rods 1 ¾" 3" - 3 ½"
11. Working lights 7 pcs 45 mm 76 - 89 mm
12. Gauge set For accumulator pressure 4. MF-rod
1 ¾" 3" - 3 ½"
checking
51 mm 89 - 102 mm
13. Reversing alarm 5. MF-rod
Service and spare 2" 3 ½" - 4"
14. Manuals
parts manuals:
2 x paper copy Note
2 x CD-ROM (Toolman) - Not with 10' MF-rods
- With hose reel only 10’ or 12’ rods
15. EU-safety devices
- 51 mm (2”) extension rods only 5+1
- If several jaws selected please specify jaws
assembled
SELECTION OF OPTIONS
1. Turnable superstructure 180° 19. Movable drill steel support
2. Air conditioning 20. Primary separator PE 50
3. Rod greasing system
4. P&Q electric vertical angle indicator (± 6 deg.) 21. Horizontal drilling kit
5. Electric angle indicator TIM 2302 with aiming 22. Hose reel (not with 14’ rods)
unit 23. Radio with CD player
6. Measuring system TIM 2303 with aiming unit 24. Central lubrication system
7. Laser based measuring system TIM 2305 25. Kit for alternative steels
8. Electric filling pump for refuelling 26. Water injection system with tank
9. Remote control box; for rear ground support, 27. Water injection system w/o tank
driving and oscillation
10 Remote control box + hydraulic winch with cable 28. Biogradeable hydraulic oil, Shell naturelle HFE
tightness automatics (replaces previous option) 46 or HFE 68 (synthetic ester)
11. Hydraulic rear ground support 29. Extra manuals
30. First service kit for Ranger 680 Rock Pilot
12. Three-bar grouser plates
13. Towing hook 31. Special tools for HL 650, field kit
ID 150 734 88
14. Guides for grousers 32. Special tools for HL 650, complete
15. Fuel operated heater for cabin, hydr. oil and en- ID 150 730 78
gine 33. Antifreeze for air lines
16. Flushing control automatics
17. Shut down of suction for water holes
18. Sanrock Mini H hydraulic bit grinder www.tamrock.sandvik.com
SANDVIK TAMROCK reserves the right to change this specification without further notice
SANDVIK TAMROCK OY, P.O.Box 100, FIN-33311 Tampere, FINLAND 4/4
Tel.int. +358 205 44 121, Telefax int. +358 205 44 120
