www.moatech.

com

est
rld b
wo
the
rsue
e pu
W

We pursue
the world best
and make much of the customer's proposal.
Moatech families make a promise to do our best continuously.

Ver.6.0_En / Dec. 2016 / Responsible for the contents : Moatech co., ltd
Company
History

1985 Established “KOREA WINDING TECHNOLOGY”

1994 Concluded a technical contract with TOSHIBA TEC
1995 Began manufacturing “PM Stepping Motor for OA”
1996 Began manufacturing “Stepping Motor for air_Con. louver”
1997 Started up CHINA Factory (DONG MA Electronics)
Changed the name to “MOATECH CO., LTD.”
Listed KOSDAQ
1998 Achieved ISO 9001 certification (KQC-0559)
Established R&D Center in Korea
Began manufacturing “Stepping Motor for Optical Disk Drive”
2002 Established “MOATECH PHILIPPINES INC.”
Achieved ISO 9001 certification for China Factory
2003 Achieved TS16949 and ISO14001 certification
2004 Established “New R&D Center”
Developed “BLDC Motor”
2005 Awarded “World Best Commodity” (Step. Motor of LS Type for ODD)
2006 Take over “HYSONIC CO., LTD.” (Produce VCM for Camera module in Cell phone
Developed “Stepping Motor for DSC and IRIS Meter for CCTV Camera”
2007 Achieved SQ certification from Hyundai and KIA Motors

Introduction
Line up AFS actuator for automobile
2008 Started up Philippines Factory (MOATECH MFG. PHILIPPINES, INC)
2009 Korea Technology Award 2009 ‘Excellence Award’ (Digital steel Camera用 Φ6 Step Motor)
2011 Developed “Parking Release Actuator For Automobile”

of item
2012 Minebea group took over 50.8% shares of Moatech Co., Ltd. through M&A.
2014 Developed “AFS Swivel Actuator(1.6G) For Automobile”
2016 Developed “Rotary Solenoid Actuator For Automobile”
STEPPING MOTOR
SP-04RG Type SPS-06RF Non Bracket Type
• DIMENSIONS(mm) • CHARACTERISTICS (gf·Cm) • DIMENSIONS(mm) • CHARACTERISTICS (gf·Cm)

04
0.8 2.7

Torque (gf.cm)

Torque (gf.cm)
0.7
2.6
0.6
0.5 2.5

05
0.4
0.3 2.4
0.2 2.3
0.1
0.0 2.2

0 400 600 800 100 1200 1400 1600
0 400 500 600 700 1000 1200
Pull-In Pull-Out Frequency rate (PPS) Pull-In Pull-Out Frequency rate (PPS)

SP-04RG-100
SPS-060RF-140L

• SPECIFICATION • SPECIFICATION
Torque (gf·cm) Max. Max. Torque (gf·cm) Lead Screw Size
Max. Step Drive Drive
Drive Max. Resistance Phase No Road Slew
Step Angle Voltage Resistance Phase No Road Model Angle Volt Circuit Holding Pull in Pull out Pitch Diameter H L
Series Circuit Slew speed Pull In Pull Out Response Speed
Response
Holding Degree VDC Ω±7% - - PPS PPS 0PPS 800PPS 800PPS mm mm mm mm
Degree VDC Ω±10% - - PPS PPS 600 PPS 600 PPS Bipolar/
100S 18˚ 5.0 20 2 Constant Volt. 1000 3000 1.5 1.7 1.8 0.3 Φ1.7 4.7 10.6
Bipolar V
100 22.5 3 22 2 1200 5000 - 0.6 0.6
Const Bipolar/
200M 18˚ 5.0 40 2 Constant Volt.
1000 3000 2 2.0 2.2 0.3 Φ1.7 5.8 11.9
• APPLICATION : smart phone,slime blu-ray Optical pick-up, etc 140L 18˚ 4.5 30 2
Bipolar/
1000 3000 2.5 2.3 2.7 - Φ1.0 7.5 2.6
Constant Volt.
Bipolar/
300L 18˚ 5.0 30 2 Constant Volt. 1000 3000 3 3.0 3.5 - Φ1.0 7.5 2.6

• APPLICATION : DSC (Digital Steel Camera)

LM-10RF Type SPS-06RF Bracket Type

• DIMENSIONS(mm) • CHARACTERISTICS (N) • DIMENSIONS(mm) • CHARACTERISTICS (gf·Cm)
4.2 2.2
Axial force (N)

Torque (gf.cm)
3.6
2.0
3.0
2.4 1.8

CW
W
1.8 1.6

CC
1.2
1.4
0.6
0 1.2

0 100 200 300 400 500
0 400 500 600 700 1000 1200
Axial force(N) Frequency rate (PPS) Pull-In Pull-Out Frequency rate (PPS)

LM10RF-010 SPS-060RF-520T

• SPECIFICATION • SPECIFICATION
Lead Screw Lead wire Max. Max. Torque (gf·cm) Lead Screw Size
Drive Max. Step Drive Drive
Step Angle Drive Max. Axial force Resistance Phase No Road Slew
Volt Resistance Phase No Road Model Angle Volt Circuit Holding Pull in Pull out Pitch Diameter H L
Model Circuit Slew speed (N) Lead Pitch Diameter L(mm) Response Speed
Response
Degree VDC Ω±7% - - PPS PPS 0PPS 800PPS 800PPS mm mm mm mm
Degree VDC Ω±2.5 - - PPS PPS 100 PPS mm mm mm Bipolar/
520T 18˚ 4.5 30 2 Constant Volt. 1000 3000 1.5 1.4 1.6 0.3 Φ1.7 3.8 7.5
Bipolar V
10 18˚ 5.0 22 2 1000 2000 1.96 0.4 2.2 250
Const Bipolar/
521T 18˚ 4.5 30 2 Constant Volt. 1000 3000 1.5 1.4 1.6 0.25 Φ1.7 3.8 14.3
• APPLICATION : Optical Fiber Fusion Splicer 201S 18˚ 4.5 30 2
Bipolar/ 1000 3000 1.5 1.7 1.9 0.3 Φ1.7 4.7 11.4
Constant Volt.

• APPLICATION : DSC (Digital Steel Camera)

STEPPING MOTOR
SPS-S07RG Type SPS-10RF Type
• DIMENSIONS(mm) • CHARACTERISTICS (gf·Cm) • DIMENSIONS(mm) • CHARACTERISTICS (gf·Cm)

06
5.0 16.0

Torque (gf.cm)

Torque (gf.cm)
14.0
4.0
12.0
3.0 10.0

07
8.0
2.0 6.0
4.0
1.0 271H
2.0
0.0 0.0
0 400 800 1200 1600 2000 0 400 800 1200 1600 2000
Pull-In Pull-Out Frequency rate (PPS) Pull-In Pull-Out Frequency rate (PPS)

SPS-S07RG-208
SPS-10RF-271H

• SPECIFICATION • SPECIFICATION
Torque (gf·cm) Lead Screw Size Max. Max. Torque (gf·cm) Lead Screw Size
Step Drive Max. Max. Step Drive Drive
Drive Resistance Phase No Road Slew
Angle Volt Resistance Phase No Road Slew Lead Model Angle Volt Circuit Holding Pull in Pull out Lead Pitch Diameter H L
Model Circuit Holding Pull In Pull Out Diameter H L Response Speed
Response speed Pitch
Degree VDC Ω±2.5 - - PPS PPS 0PPS 400PPS 2000PPS mm mm mm mm
Degree VDC Ω±1.5 - - PPS PPS OPPS 400PPS 1600PPS mm mm mm mm Bipolar/
271H 18˚ 7.5 25.1 2 Constant Volt. 1000 2000 (11.7) 8.8 4.9 3 3.0 11.1 54.4
Bipolar/
208 22.5˚ 4.0 14.5 2 Constant 1000 3000 (3.8) 3.1 3.1 1.7 2.5 12.6 48
Volt • APPLICATION : VIDEO GAME CONSOLE
Bipolar/
301A 22.5˚ 4.0 14.5 2 Constant 1000 3500 (5) 4.0 3.0 1.6 2.5 14.6 50.6
Volt

• APPLICATION : 9.0mm OPTICAL DISK DRIVE

SPS-S08RG Type SPS-15RF Type

• DIMENSIONS(mm) • CHARACTERISTICS (gf·Cm) • DIMENSIONS(mm) • CHARACTERISTICS (gf·Cm)
7.0 30.0
Torque (gf.cm)

Torque (gf.cm)
6.0 25.0
5.0 20.0
4.0
15.0
3.0
10.0
2.0
5.0
1.0
0.0 0.0
0 400 800 1200 1600 2000
0 400 600 800 1000 1400 1600
Pull-In Pull-Out Frequency rate (PPS) Pull-In Pull-Out Frequency rate (PPS)

SPS-S08RG-230 SPS-15RF-172FH

• SPECIFICATION • SPECIFICATION
Step Drive Max. Max. Torque (gf·cm) Lead Screw Size
Max. Max. Torque (gf·cm) Lead Screw Size Drive
Step Drive Drive Angle Volt Resistance Phase No Road Slew
Resistance Phase No Road Slew Model Circuit Holding Pull in Pull out Lead Pitch Diameter H L
Angle Volt Circuit Lead Response Speed
Model Response speed Holding Pull In Pull Out Diameter H L
Pitch Degree VDC Ω±7% - - PPS PPS 0PPS 400PPS 1400PPS mm mm mm mm
Degree VDC Ω±1 - - PPS PPS OPPS 400PPS 1600PPS mm mm mm mm Bipolar/
172FH 18˚ 5.0 10 2 Constant Volt. 1000 1700 (25) 21.0 11.0 3 3.0 12.5 54.6
Bipolar/
230 22.5˚ 4.0 15 2 Constant 1050 3100 (6) 3.5 3.2 2 2.5 12.6 46.8 Bipolar/ 13.9
189FH 18˚ 5.0 10 2 Constant Volt. 1200 1780 (35) 23.2 (1600PPS) 3 3.0 12.5 63.0
Volt
Bipolar/ Bipolar/
276_B 18˚ 4.5 10 2 Constant Volt. 1000 1700 (19.6) 14.7 6.8 3 3.0 12.5 55.9
360HA 22.5˚ 4.0 13 2 Constant 1000 3000 (5) 3.3 2.4 1.6 2.5 14.6 46
Volt Bipolar/
888FH 18˚ 4.5 10 2 Constant Volt. 900 1700 25 18.0 9.0 3 3.0 12.5 53.0
• APPLICATION : 12.5mm OPTICAL DISK DRIVE
• APPLICATION : OPTICAL DISK DRIVE
STEPPING MOTOR
GSP-24RW Non Bush Type SP-15RF Type
• DIMENSIONS(mm) • DIMENSIONS(mm) • CHARACTERISTICS (gf·Cm)

08
30.0

Torque (gf.cm)
25.0
20.0

09
15.0
10.0
5.0
0.0

0 300 500 700 900 1100
Pull-In Pull-Out Frequency rate (PPS)

GSP-24RW-02
SP-15RF-232A
• SPECIFICATION • SPECIFICATION
Max. Max. Torque (gf·cm) Lead Wire Ass'y Torque (gf·cm) Pinion L/W Ass'y
Drive NoMax.
Step Drive Drive Step Max.
Phase Resistance No Road Slew Noise Voltage Resistance Phase Road Slew
Model Angle Volt Circuit L Series Angle Circuit Response
Response speed Pull-in Contact Speed Holding Pull in Pull out Module Housing
Friction Detent Housing Terminal PCD Z L/W L(mm)
Degree VDC - Ω±7% - PPS PPS 100PPS (PPS) mm Terminal
Degree VDC Ω±7% - - PPS PPS (PPS) (PPS)
02 5.625˚/64 12 1-2 300 UNIPOLAR 400 700 Max 40dB Min 600(100) 700~2400 Min 600 Without lead wire
14
011K 7.2 30 930 - 24 - (800) 0.25 Φ3.5 14 NONE
011(60) 5.625˚/64 12 1-2 300 UNIPOLAR 400 700 Max 40dB Min 650(100) 700~2400 Min 600 Without lead wire
Non MOLEX
011F 11.25˚/64 12 2-2 190 UNIPOLAR 450 900 Max 40dB Min 900(182) Friction Min 600 SMH250-05L YST025L-3 145 20/16 5264-04P UL1007
015K 8.5 20 1050 - 40 - (800/1200) 0.3 Φ4.2 14 MOLEX AWG#26 110
JST PAP- JST SPHD-
SP1 5.625˚/64 12 1-2 300 UNIPOLAR 400 700 Max 40dB Min 650(100) 700~2400 Min 600 05V-S 002T-P0.5 260 5263 PBT
JST PAP- JST SPHD- MOLEX
PS1 5.625˚/64 12 1-2 300 UNIPOLAR 400 700 Max 40dB Min 650(100) 700~2400 Min 600 145 19.4 51021-0900 UL1685
05V-S 002T-P0.5 080K 7.2 17.7 1100 - 35 - (800) 0.3 Φ4.8 16 MOLEX AWG#30 170
50058-8000
• APPLICATION : Air Conditioner / Ice maker / Electric Fan / Bidet / Automobile MOLEX
13 51021-0900 UL1685
082 8.5 5 1100 2500 30 - (1500) 0.25 Φ3.0 12 MOLEX AWG#30 140

GSP-24RW Bush Type Bipolar

V Const
22
50058-8000
MOLEX
51021-0900 UL1685
085 18 8.5 7 2-2 1100 2500 30 - (1280) 0.25 Φ3.0 12 MOLEX AWG#30
140
50058-8000
• DIMENSIONS(mm)
7
210AP 8.5 43 980 - 40 - NONE NONE
(1200)

23
232A 4.2 10 1000 1200 35 - NONE NONE
(600)

8 FPC(SPS15RF
600K 5 30 700 - 25 - (800) 0.35 Φ4.55 13 100K 공용) 45

GSP-24RW-P Bipolar A 15
235 5 4.7 Const 1000 2500 28 - (1440) NONE NONE
(370mA)
• SPECIFICATION
• APPLICATION : Mini printer, Camera, DVD-Plater, Medical Instrument, etc.
Step Drive Max. Max. Torque (gf·cm) Lead Wire Ass'y
Phase Drive Noise
Angle Volt Resistance No Road Slew
Model Circuit L
Response speed Pull-in Contact
100PPS Friction Detent Housing Terminal
Degree VDC - Ω±7% - PPS PPS (PPS) mm
P 5.625˚/64 12 1-2 300 UNIPOLAR 500 800 Max 40dB Min 600(100) 600~2000 Min 600 Without lead wire

PA 5.625˚/64 12 1-2 300 UNIPOLAR 500 800 Max 40dB Min 600(100) 600~2000 Min 600 Without lead wire

• APPLICATION : Air Conditioner, Auto Mobile

STEPPING MOTOR
SP-20RF Type SP-25RD Type
• DIMENSIONS(mm) • CHARACTERISTICS (gf·Cm) • DIMENSIONS(mm) • CHARACTERISTICS (gf·Cm)

10
45.0 200.0

Torque (gf.cm)

Torque (gf.cm)
40.0 180.0
35.0 160.0
30.0 140.0
25.0 120.0

11
20.0 100.0
80.0
15.0
60.0
10.0
40.0
5.0 20.0
0.0 0.0
0 400 500 600 700 800 900 1200
0 400 600 800 1000 1200 1400 1600
Pull-In Pull-Out Frequency rate (PPS) Pull-Out Frequency rate (PPS)

SP-20RF-060K
SP-25RD-080
• SPECIFICATION • SPECIFICATION
Max. Torque (gf·cm) Pinion L/W Ass'y
Drive NoMax.
Step Drive Max. Torque (gf·cm) Pinion L/W Ass'y
Angle Voltage Resistance Phase No Road Max. Slew Step Voltage Resistance Phase Road Slew
Circuit
Series Response Speed Holding Pull in Pull Out Module PCD Z
Housing L/W L(mm) Series Angle Circuit Response Speed Pull in Pull out Housing
Degree VDC Ω±7% - - PPS PPS (PPS) (PPS) Terminal Holding Module PCD Z Terminal L/W L(mm)
Degree VDC Ω±7% - - PPS PPS (PPS) (PPS)
MOLEX
Bipolar/ 30 51021-1000 UL1061 JST CZHR-
060K 5 13 V Const 650 - 85 - (400) 0.3 Φ4.8 16 MOLEX AWG#28
165 Unipolar 110 06V-S UL1061
040 24 65 1-2 500 1500 200 - LEAD SCREW SCZH- AWG#26 85
50058-8000 V Const (500)
002T-P0.5
Bipolar/ 50 UL1061
091 24 20 V Const 1800 - 80 - (1200) 0.5 Φ4.0 8 None AWG#28 54 Bipolar A
7.5 77
080 8 6.7 1-2 Const 1700 3500 183 - (1600) 0.4 Φ6.8 17 NONE
18 Bipolar A MOLEX (600mA)
310 24 12 Const 1250 2000 85 - 45 0.35 Φ4.55 13 51004-0400 UL1061 300
(1600) MOLEX AWG#28 Bipolar A 90 LEAD
(350mA) 53014-04 600 24 33 1-2 Const 1150 1800 120 - 0.3 Φ4.905 SCREW NONE
(200mA) (1100)
Bipolar A MOLEX
50 5264-04 UL1061
410 24 20 Const 800 2000 85 - 0.4 Φ5.6 14 165
(220mA) (600) MOLEX
5263PBT
AWG#28 • APPLICATION : Mini printer, Type writer, etc.

• APPLICATION : Mini Printer

*Because of Touque Margin, There is the differnce between torque Value in "SPECIFICATION and "CHARACTERISTICS"

SP-20RF HALL IC Type SP-35 Type (H=8.4)

• DIMENSIONS(mm) • CHARACTERISTICS (gf·Cm) • DIMENSIONS(mm) • CHARACTERISTICS (gf·Cm)
180
Torque (gf.cm)

80.0

Torque (gf.cm)
160 70.0
140
60.0
120
50.0
100
80 40.0
60 30.0
40 20.0
20 10.0
0 0.0
0 300 600 900 1200 1600
0 400 600 800 1000 1200 1400 1600
Pull-In Pull-Out Frequency rate (PPS) Pull-In Pull-Out Frequency rate (PPS)

SP-35RC-800S
SP-20RF-107
• SPECIFICATION • SPECIFICATION
Drive NoMax.
Step Drive Drive Max. No Road Max. Torque (gf·cm) HALL IC FEED Size Step Drive Max. Torque (gf·cm) Pinion L/W Ass'y
Resistance Phase Resistance Phase Road Slew
Model Angle Volt Circuit Response Slew speed Holding Pull in Pull out BACK H WIRE L Series Angle Volt Circuit Response Pull in Pull out
Speed Housing
Holding Module PCD Z Terminal L/W L(mm)
Degree VDC Ω±7% - - PPS PPS OPPS 313PPS 313PPS SIGNAL/ 1 ROTATION mm mm Degree VDC Ω±7% - - PPS PPS (PPS) (PPS)
Bipolar/ 4000 5000 Bipolar A 45 41 TYCO UL10272
63
107 18˚ 12.0 7.3 2 Constant (1/4 Micro (1/4 Micro (105) - (3225PPS) 1 33 (75) 800S 24 23 1-2 Const 1100 10000 62 (500) (2441) 0.4 Φ4.4 11 173977-4 AWG #26 270
Current step) step) (RMS200mA)
3.75
Bipolar/ 75 Bipolar A 20.4 JST UL1430
108 18˚ 12.0 7.3 2 Constant 1000 1100 (105) - 1 33 (100) 900S 42 10 1-2 Const 800 10000 4.5 - (3636) 0.4 Φ6.4 16 PHR-4 AWG #30 357
Current (313PPS) (RMS340mA)
Bipolar/ 4000 5000 63
900 18˚ 12.0 7.3 2 Constant
Current (1/4 Micro step) (1/4 Micro step) (105) - (3225PPS) 4 33 (100) • APPLICATION : SCANNER

• APPLICATION : (OUTDOOR) ACTUATOR DEVICE

STEPPING MOTOR
SP-35 Type (H=15) SP-35 Type (H=15.2)
• DIMENSIONS(mm) • CHARACTERISTICS (gf·Cm) • DIMENSIONS(mm) • CHARACTERISTICS (gf·Cm)

12
350.0 250.0

Torque (gf.cm)

Torque (gf.cm)
300.0 200.0
250.0
150.0
200.0

13
100.0
150.0
50.0
100.0
50.0 0.0
0.0 0

0 300 400 500 600 700 0 1728 6250 7386
Pull-In Pull-Out Frequency rate (PPS) Pull-out Frequency rate (PPS)

SP-35RD-012S SP-35RD-270S

• SPECIFICATION • SPECIFICATION
Max. Max. Torque (gf·cm) Pinion L/W Ass'y Max. Max. Torque (gf·cm) Pinion L/W Ass'y
Step Drive Step Drive
Voltage Resistance Phase No Road Slew Voltage Resistance Phase No Road Slew
Series Angle Circuit Pull in Pull out Housing Series Angle Circuit Pull in Pull out
Response Speed Holding PCD Z L/W L(mm) Response Speed Housing
Module Terminal Holding Module PCD Z Terminal L/W L(mm)
Degree VDC Ω±10% - - PPS PPS (PPS) (PPS) Degree VDC Ω±10% - - PPS PPS (PPS) (PPS)
Bipolar A 260/220 HAN LIM UL1007 YEON HO
030KS 24 13 2-2 Const 700 1300 400 - 0.4 12 CH 0500-04 AWG#26 80 Bipolar A
(800/1200)
Φ4.8 170/130/120 20010HS- UL1007
(300mA) CT0500 270S 3.75 24 2.3 1-2 Const 1600 10000 - - (1728/6250/7386) 0.3 Φ7.024 22 04 AWG#26 125
(600mA)
JST PHR-6 UL1061 20010TS
Unipolar V 300 310
032KS 24 50 1-2 Const
1400 3000 500
(400) (400)
0.4 Φ6.0 15 JST SHP- 80
7.5 002T-P0.5S AWG#28 • APPLICATION : Mini Printer, Copy Machine, Fax Machine, Printer, etc
Unipolar V 180 180 Wafer *Because of Touque Margin, There is the differnce between torque Value in "SPECIFICATION and "CHARACTERISTICS"
320SB 12 36 2-2 Const 600 700 400 (333) (333) 0.35 Φ3.5 10 YEONHO 15005WS-05
Unipolar V 190 UL1061
012S 24 83 2-2 Const 650 850 420 - (500) 0.4 Φ8.0 20 NONE AWG#26 110

• APPLICATION : Mini Printer, Copy Machine, Fax Machine, Printer, etc

*Because of Touque Margin, There is the differnce between torque Value in "SPECIFICATION and "CHARACTERISTICS"

SP-35 Type (H=12.2) SP-35 Type (H=21.5)

• DIMENSIONS(mm) • CHARACTERISTICS (gf·Cm) • DIMENSIONS(mm) • CHARACTERISTICS (gf·Cm)
350.0 350.0
Torque (gf.cm)

Torque (gf.cm)
300.0 300.0
250.0 250.0
200.0 200.0
150.0 150.0
100.0 100.0
50.0 50.0
0.0 0.0

0 200 400 800 1200 1600 2000
0 400 600 800 1000 1200 1400
Pull-Out Frequency rate (PPS) Pull-In Pull-Out Frequency rate (PPS)

SP-35RD-210SH
SP-35RD-750L
• SPECIFICATION • SPECIFICATION
Max. Max. Torque (gf·cm) Pinion L/W Ass'y Max. Max. Torque (gf·cm) Pinion L/W Ass'y
Step Drive Step Drive
Voltage Resistance Phase No Road Slew Voltage Resistance Phase No Road Slew
Series Angle Circuit Pull in Pull out Housing Series Angle Circuit Pull in Pull out Housing
Response Speed Holding PCD Z L/W L(mm) Response Speed Holding PCD Z L/W L(mm)
Module Terminal Module Terminal
Degree VDC Ω±10% - - PPS PPS (PPS) (PPS) Degree VDC Ω±10% - - PPS PPS (PPS) (PPS)
MOLEX YEONHO
Bipolar A Bipolar A
180 51004-0800 UL10272 224.5 20010HS- UL1007
210SH 7.5 24 10.4 2-2 Const 1200 1500 360 - (1200) 0.4 Φ6.4 16 MOLEX AWG#28 250 750L 5.5 Const 730 1350 - - 0.5 Φ7.0 14 155
(460mA) (1064) 04 AWG#26
50011-8000 (500mA) 20010TS
7.5 24 2-2
AMP
Bipolar A
• APPLICATION : Mini Printer, etc. 800L 6.1 Const 600 2000 500 - 357 0.5 Φ8.0 16 179228-4 UL1007 155
AMP AWG#26
(600mA) 179227-1

• APPLICATION : Mini Printer, etc

STEPPING MOTOR
SP-42 Type (H=14.6) SP-55 Type
• DIMENSIONS(mm) • CHARACTERISTICS (gf·Cm) • DIMENSIONS(mm) • CHARACTERISTICS (gf·Cm)

14
500.0 2000.0

Torque (gf.cm)

Torque (gf.cm)
450.0 1800.0
400.0 1600.0
350.0 1400.0
300.0 1200.0

15
250.0 1000.0
200.0 800.0
150.0 600.0
100.0 400.0
50.0 200.0
0.0 0.0
0 300 600 900 1200 1500 1800
0 300 500 700 795 900 1100
Pull-In Pull-Out Frequency rate (PPS) Pull-Out Frequency rate (PPS)

¢ª

SP-42RD-010S SP-55RD-100

• SPECIFICATION • SPECIFICATION
Step Max. Max. Torque (gf·cm) Pinion L/W Ass'y Max. Max. Torque (gf·cm) Pinion L/W Ass'y
Voltage Resistance Drive Step Drive
Angle Phase No Road Slew Voltage Resistance Phase No Road Slew
Series Circuit Pull in Pull Out Housing Series Angle Circuit Pull in Pull out
Response Speed Holding Module PCD Z L/W L(mm) Response Speed Housing
Terminal Holding Module PCD Z Terminal L/W L(mm)
Degree VDC Ω±10% - - PPS PPS (PPS) (PPS) Degree VDC Ω±10% - - PPS PPS (PPS) (PPS)
Unipolar MOLEX Bipolar A 1490 WAFER
010S 12 2-2 A Const 600 1800 540 - 230 0.5 Φ9.5 19 51004-0600 UL1061 80 100 7.5 24 5.6 2-2 Const 467 1031 - - (795) 0.5 Φ9.046 17 MOLEX 53015-0410
(450mA) (1200) MOLEX AWG#26 (1.2A)
50011-8000
7.5 24
Unipolar JST PHR-6 UL1061
• APPLICATION : Printer, etc
020S 16 2-2 A Const 700 1400 650 120 320 0.4 Φ5.6 14 SHP-002T- 120
(500mA) (800) (1000) AWG#26
P0.5S

• APPLICATION : Printer, etc

SP-42 Type (H=18.5) SP-42 Type (H=23)

• DIMENSIONS(mm) • CHARACTERISTICS (gf·Cm) • DIMENSIONS(mm) • CHARACTERISTICS (gf·Cm)
800.0 1000.0

Torque (gf.cm)
Torque (gf.cm)

700.0 900.0
800.0
600.0
700.0
500.0 600.0
400.0 500.0
300.0 400.0
300.0
200.0
200.0
100.0 100.0
0 0.0

0 400 1000 1600 2200 2400 2600
0 500 550 580 600 650 700
Pull-Out Frequency rate (PPS) Pull-In Pull-Out Frequency rate (PPS)

SP-42RD-191M SP-42RD-200L
• SPECIFICATION • SPECIFICATION
Max. Max.
Drive NoMax.
Step Drive Torque (gf·cm) Pinion L/W Ass'y Step Max. Torque (gf·cm) Pinion L/W Ass'y
Voltage Resistance Phase No Road Slew Voltage Resistance Phase Road Slew
Series Angle Circuit Pull in Pull Out Series Angle Circuit Response
Response Speed Holding Module PCD Z
Housing L/W L(mm) Speed Holding Pull in Pull out Module PCD Z Housing L/W L(mm)
Degree VDC Ω±10% - - PPS PPS (PPS) (PPS) Terminal Terminal
Degree VDC Ω±10% - - PPS PPS (PPS) (PPS)
Bipolar A AMP AMP
561 Φ8.0 179228-4 UL1007 Unipolar 500 550 179228-6 UL1007
080M 24 7.9 2-2 Const 600 1000 100 - (800) 0.5 16 AMP AWG#26
50 041L 24 20 1-2 V Const 1600 2000 1000 (1000) (1000) S2M Φ7.64 12 AMP AWG#26 100
(600mA) 179227-1 175227-1
7.5
Unipolar MOLEX AMP
480 51004-0500 UL1007 Unipolar 320 380 179228-6 UL1007
110MAT 17 13 1-2 A Const 1000 1700 710 - (1000) NONE MOLEX AWG#26
135 043L 24 30 1-2 V Const 1600 2000 1000 (1200) (1200) 0.5 Φ8.0 16 AMP AWG#26 100
(300mA) 50011-8000 7.5 175227-1
Bipolar A MOLEX GIL-S-4S-
140 51004-0400 UL1007 Bipolar A 450 300 S2C2 UL1007
140M 3.75 24 5.8 2-2 Const 650 4000 550 - (1410) 0.5 Φ9.0 18 MOLEX AWG#26
285 100L 24 6.3 2-2 Const 700 1200 750 0.5 Φ8.0 16 GIL-S- 80
(400mA) (440mA) (800) (1000) AWG#26
50011-8000 C2-S-10000
Bipolar A YEONHO Bipolar A 600 AMP
360 UL1007 200L 24 10.4 2-2 Const 500 900 1000 - 0.8 Φ7.2 9 NONE
191M 7.5 24 5.2 1-2 Const 1300 3500 703 - (2650) 0.5 Φ9.6 19 20017HS- AWG#28
80 (850) 175487-6
(540mA) 04 (600mA)

• APPLICATION : Mini Printer, Copy Machine, Fax Machine, Printer, etc • APPLICATION : Printer, Facsimile, Finisher, Mini Printer, Copy Machine, etc
*Because of Touque Margin, There is the differnce between torque Value in "SPECIFICATION and "CHARACTERISTICS"
BLDC MOTOR ACTUATOR
BLDC DAMPER
• DIMENSIONS(mm) • T-I CHARACTERISTICS DU24 Series DU25 Series • Product Features
1. Stepping motor type.
16
5.000 2.5

[rpm]
2. Bi-polar control.
4.000 2.0
3. Fine control is possible because there is little error in step angle.
3.000 1.5
4. Low noise driving.
2.000

1.000
1.0

0.5
5. Open and closing operation in low temperature environment. 17
0

0 25 50 75 100 125 150
0.0
• Usage
Torque [mN∙m]
RPM Current
1. Eletrical refrigerator
2. Heat exchanger
BL55B
• SPECIFICATION • DIMENSIONS(mm)
Drive voltage Torque Cogging Rated speed Rated Torque Rated Current Position
Constant Torque Noise Magnet
Series sensor Drive circuit
type
[VDC] [Nm/A] [gf·cm] [rpm] [mN·m] [A] [dB] method

BL24D 24 0.025 0.5 4000 8 0.18 30 Nd-Fe-B X

BL38A 24 0.045 120 800 30 0.54 35 Hall IC Nd-Fe-B X

BL38B 24 0.045 9 800 25 0.54 35 Ferrite X

BL55B 24 0.096 200 1800 138 2.30 35 Ferrite O

DU24 Series DU25 Series
BL55M 24 0.096 200 2200 125 2.00 35 Ferrite O
Hall Element
BL55T 24 0.096 200 1800 157 2.30 35 Ferrite O
• SPECIFICATION
BL55Q 24 0.096 200 3000 108 2.00 35 Nd-Fe-B O
Max. Max. Torque (gf·cm) Lead wire
Drive Drive
Step Angle Resistance Phase No Road Slew Detent Noise
Series Volt Mode Pull In Pull Out L(mm)
Response speed torque
Degree VDC Ω±7% - - PPS PPS [gf*cm] PPS PPS mm DB
DU24-011 - 220
11.25 300 500 600 500 1000[100]
DU24-014 - 400
- 450
DU25-010 12 2-2 Bipolar 35
DU25-020 - 700
7.5 415 400 800 500 1000[300]
DU25-034 - 350
DU25-073
- 700
ACTUATOR
Step Actuator : VS35 Series / VSW35 Series Linear Step Actuator : VL35XX-Series
• Product Features VL35AG-H03 VL35AA-H01 • Product Features
1. Stepping Motor Type. 1. Stepping Motor Type.


2. LIN communication control and PWM control are possible.
3. Fine control is possible because there is little error in step angle.


2. LIN communication control and PWM control are possible.
3. Fine control is possible because there is little error in step angle.
18
4. Output torque is higher than Linear Type. 4. Linear type allows linear operation and wide range of operation.
5. Anti-reverse function is possible. 5. It has good responsiveness of start, stop, forward and reverse. 19
• Usage • Usage
1. Home electric appliances 1. Industrial equipment : Flow control valve
2. Automobile 2. Automotive : Optical axis control device
3. Communication equipment : Antenna adjustment device

• DIMENSIONS(mm) • SPECIFICATION • DIMENSIONS(mm)

ITEM SPECIFICATION UNIT REMARK
Operating voltage 9~16 VDC
Operating Temperature -40 ~ +110 °C
Nominal voltage 12.6 VDC
Nominal frequency 395 Hz
Nomial speed 3 rpm
Nomial thrust Min13.0 kgf·cm 12.6V (@25°C)
Current / Phase 566 mA A Constant
Resistance 5.2~5.6 Ohm Ref. VL35AG-H03 VL35AA-H01
Operating Angle ±15 deg max
Noise Level 35 dB max(@1M) Connector : KH1300004-10(UJU ELECTRONICS製)
Connector : KH1300004-10(UJU ELECTRONICS製)

• SPECIFICATION Operating Temperature : -40 ~ +110°C

Linear Step Actuator : VS25AA-Series ITEM SPECIFICATION
UNIT REMARK
PART No. VL35AG-H03 VL35AA-H01
Motor Type 35 35 Ø
• Product Features Pitch(screw) 0.8 0.8 mm
1. Stepping Motor Type.
Operating Speed 15.2 15.2 mm/s
2. LIN communication control and PWM control are possible.
Time for Full Stroke 0.81 0.99 sec.
3. Fine control is possible because there is little error in step angle.
Phase 2ph / Bipolar 2ph / Bipolar
4. Linear type allows linear operation and wide range of operation
Working Voltage Range 9~16 16~32 V
5. Precise control is possible with simple control unit.
Rated Voltage 12 24 V
• Usage Current / Phase 566 800 mA
1. Home electric appliances Rated Frequency 456 456 pps max.
2. Automobile Motor Resistance 7.5±10% 7.5±10% Ω
3. Automation Motor Pullin Torque 110 160 gf.cm min. 12V (@25°C)
Axial Force 2.2 2.2 kgf min.(@25°C)
Full Storke 12.3±0.5 15±0.5 mm min.
• DIMENSIONS(mm) • SPECIFICATION
Noise Level 40 40 dB max.
ITEM SPECIFICATION UNIT REMARK
Operating voltage 9~16 V
Operating Temperature -40 ~ +110 °C
Nominal voltage 12 V
Nominal frequency 395 Hz
Nomial speed 21.8 mm/sec
Nomial thrust <900 gf 12V (@25°C)
Current / Phase <200 mA
Resistance 20 Ohm
Operating Stroke ±20 mm max
Noise Level 35 dB max(@1M)
Connector : HSC04HB-B(KUM製)
ACTUATOR
Linear
LinearStep
StepActuator
Actuator::VL25AM-Series
VL25AM-XXX Linear Step Actuator : MHU15 Series
• Product Features • Product Features
1. Stepping Motor Type. 1. Actuator that acts as a step motor drive source.


2. LIN communication control and PWM control are possible.
3. Fine control is possible because there is little error in step angle.


2. Lead Screw is applied to convert the rotational motion of the motor into linear motion and output.
3. Initial position can be detected by Micro Switch.
20
4. Linear type allows linear operation and wide range of operation 4. Open loop control is possible by using step motor.
5. It has good responsiveness of start, stop, forward and reverse. 5. 0.01mm resolution is realized by applying fine pitch lead screw. 21
• Usage • Usage
1. Industrial equipment : Flow control valve 1. OA : Printers, Scanners
2. Automotive : Optical axis control device 2. Automotive : HUD
3. Communication equipment : Antenna adjustment device

• DIMENSIONS(mm) • SPECIFICATION Operating Temperature : -40 ~ +110°C • DIMENSIONS(mm) • SPECIFICATION

ITEM SPECIFICATION ITEM SPECIFICATION UNIT REMARK
UNIT REMARK
PART No. VL25AM-H01 Operating voltage 9~16 VDC
Motor Type 25 Ø Operating Temperature -30 ~ +85 °C
Pitch(screw) 0.3 mm Operating voltage 12 VDC
Operating Speed 2.9 mm/s Step Angle 18 deg
Time for Full Stroke 2.1 sec.
Lead Screw Pitch 0.2 mm
Phase 2ph / Bipolar
Axial Force Min. 120 gf @ 12.6V, 75pps
Working Voltage Range 9~16 V
Stroke 22.0 mm @ 12.6V, 60mA
Rated Voltage 12 V
VL25AM-H01 Rated Current 336 mA Max. Slewing Pulse Rate Min. 700 pps @ 12.6V, 60mA
Rated Frquency 456 pps max. Noise Max. 30 dB(A) @ 12.6V, 60mA, 1m
Motor Resistance 20±7% Ω
Connector : KYOCERA P/No. 60-8339-006-231-000
Motor Pullin Torque 110 gf·cm min. 12V (@25°C)
Axial Force 2.5 kgf min.(@25°C)
Full Storke 6 mm min.
Noise Level 45 dB max.

Brush DC Motor Actuator : PA24 Series Rotary Solenoid : LIMP HOME Series
• Product Features • Product Features
1. Actuator for functioning as Brush DC motor drive source. 1. Rotary solenoids that function as solenoids.
2. Linear cable can be mounted on the output side gear, and linear movement of cable is possible 2. Simple structure and miniaturization possible by directly moving shield (direct type, angle control
when the output side is rotated. type, two-stage control)
3. Stroke distance is controlled by input value of 2D sensor, and it is possible to control the conversion 3. It has a swinging solenoid structure and operates fast. (0.03 sec or less)
of constant stroke. 4. It can be applied to various applications.
4. Constant strokes can be maintained without the need of a separate stopper.
• Usage
• Usage 1. Automotive : Optical axis control device
1. Home electric appliances
2. Automotive

• DIMENSIONS(mm) • SPECIFICATION • DIMENSIONS(mm) • SPECIFICATION

ITEM SPECIFICATION UNIT REMARK ITEM SPECIFICATION UNIT REMARK
Operating voltage 9~16 VDC Rated Voltage 13.5 V
Operating Temperature -40 ~ +80 °C Operating Temperature -40 ~ +110 °C
Operating voltage 12 VDC First angle 30 gf·cm
holding torque (0˚)
Operating speed Max 1.6 sec @OP Gear 90deg
Operation torque 50 gf·cm
Operating force Min 12.0 kgf 12V (@25°C)
Second angle
Operating current Max 1.7 A 30 gf·cm
holding torque (60˚)
Operating Stroke 22±1 mm @OP Gear 90deg Resistance 50 Ω @25°C
Operating Stroke (max) 35 mm @OP Gear 140deg Weight 80 g
Connector : KET P/NO.MG640337 Noise Level 62 dB max(@300mm)
FAN MOTOR
Fan
Linear
Motor
StepforActuator
Automobile
: VL25AM-XXX
: VFA-070CF Series Fan
Linear
Motor
StepforActuator
Automobile
: VL25AM-XXX
: VFA-115CF Series
• Battery Cooling Fan • P-Q Curve • Ventilation Seat Fan Motor • P-Q Curve
- Application : 48V Li-ion Battery Cooling System - Application : Ventilated Seat of Automobile
22
250 100

Ps [Pa]

Ps [Pa]
- Function : Cooling system for stable operation of lithium - Function : To circulate the air inside the seat
secondary battery in 48V Lithium secondary 200 - Product Features 80

battery system 1. FAN Motor that functions as a drive source for 3 phase
- Product Features
150
BLDC motor.
60
23
1. FAN Motor that functions as a drive source for 3 phase 100
2. Compact · Thin, Low Noise, High Performance 40

BLDC motor. 50 Centrifugal FAN 20

2. Compact · Thin, Low Noise, High Performance 3. Dual outlet structure

0 0
Centrifugal FAN
0 0.1 0.2 0.3 0.4
0 0.1 0.2 0.3 0.4 0.5 0.6
Q [cmm] Q [cmm]
3. Single outlet structure

• DIMENSIONS(mm) • SPECIFICATION Expected life : 25℃ 20,000HR • DIMENSIONS(mm) • SPECIFICATION Expected life : 25℃ 20,000HR
ITEM SPECIFICATION UNIT REMARK ITEM SPECIFICATION UNIT REMARK
Appearance Size Φ70×23L ㎜ Appearance Size Φ115×28L ㎜
Operating Temperature -40 ~ +85 °C Operating Temperature -40 ~ +85 °C
Max. Static Pressure 220 Pa Max. Static Pressure 70 Pa
Max. Air Flow 0.298 cmm cmm= ㎥/minute Max. Air Flow 0.56 cmm cmm= ㎥/minute
Rotating Speed 5200 rpm Free air Rotating Speed 2400 rpm Free air
Rated Voltage 12 VDC Rated Voltage 12 VDC
Rated Current 0.35 A Rated Current 0.3 A Free air
Noise Level Max. 49 dB(A) Free air Noise Level Max. 40 dB(A) Free air
※ Noise : 1m from Inlet side of FAN ※ Noise : 1m from Inlet side of FAN

Fan
Linear
Motor
StepforActuator
Automobile
: VL25AM-XXX
: VFA-100CF Series Fan
Linear
Motor
StepforActuator
Automobile
: VL25AM-XXX
: VF23 Series
• Ventilation Seat Fan Motor • P-Q Curve • Active Incar
- Application : Ventilated Seat of Automobile - Application : Inside of car’s temperature and humidity
300
Ps [Pa]

- Function : To circulate the air inside the seat adjustment

- Product Features - Function : temperature and humidity detection mounted in the
1. FAN Motor that functions as a drive source for 3 phase 200 vehicle interior
BLDC motor. - Product Features
2. Compact · Thin, Low Noise, High Performance 100 1. BLDC FAN Motor that functions as a motor.
Centrifugal FAN 2. Hall Sensor Type Driver.
3. Single outlet structure 3. Compact, low noise Centrifugal FAN
0
0 0.1 0.2 0.3 0.4 0.5
Q [cmm]

• DIMENSIONS(mm) • SPECIFICATION Expected life : 25℃ 20,000HR • DIMENSIONS(mm) • SPECIFICATION

ITEM SPECIFICATION UNIT REMARK SPECIFICATION
ITEM UNIT REMARK
Appearance Size Φ100×20L ㎜ A Type D Type
Operating Temperature -40 ~ +85 °C Voltage Range VDC 8~16 8~16
Max. Static Pressure 250 Pa Nominal Voltage VDC 12 12
Max. Air Flow 0.5 cmm cmm= ㎥/minute Nominal Current mA <60 <50 Free air
Rotating Speed 3900 rpm Free air Nominal Speed rpm 2,900 2,100 Free air
Rated Voltage 13.5 VDC A Type D Type Max. Flow Rate X 10⁻³㎥/min 25.5 20.1 cmm= ㎥/min.
Rated Current 0.55 A Air Flow CFM 0.9 0.71
Noise Level Max. 52 dB(A) Free air Operating Temp. °C -40~+95 -40~+95
※ Noise : 1m from Inlet side of FAN Storage Temp. °C -40~+100 -40~+100
Service Life h 5,000 5,000 at 23°C
Noise dB(A) <30 <26 Free air
Mass g 28 30
※ Noise : 10cm from Inlet side of FAN
Terminology and Your
Characteristics Contact

STEPPING MOTOR TERMINOLOGY

◀
on▶

Bu
Suw

ch
• Holding Torque • Point D: Max Slew Speed

eo
n
The maximum torque generated to the counter an external torque The maximum frequency at which the motor can rotate in e-way on▶
ok Fiv Suw

◀
applied on the output shaft in condition where the motor is at a halt synchronized with the starting frequency which is gradually Gantesersection

Mo
rae
◀ In
Office
in an excitation condition. increased toward the maximum starting rate under no-load

na
ng-gus

em
condition. do

ak
Guwol APT m
Na ossroad

et
• Detent Torque Moatech cr
Head Office l
Guwsoroads

◀ In
Ga terse
The maximum torque generated to the counter an external torque • Area E: Pull-in Area
cros

ns cti
Gil hospital Namdong-gu Office

eo on
applied on the output shaft in condition where the motor is at a halt The responses of start, stop and rotation is possible in this area.

kF
ng▶
Namdong fire station Anya

ive
-w
in an non-excitation condition. The motor is driven without problems as long as the operating
IC

ay
spital hang

Na
Seoc
point is found in this area. City hall
Gil hoossroads

mc
ho
• Line A: Pull-in(Starting) Characteristic cr Junghai gas station

nD

M
on
Inhang sporax

ok
Showing the relationship between input frequency and the • Area F: Pull-out Area

g▶

po
ay
highw

▶
maximum torque(pull-in torque) capable of starting the motor at The response is possible without losing synchronization in this area

ind
on

us
Inche

Na com
tria
that input frequency when the load torque is added above the frequency of pull-in area.
NO.2

md ple
l

on x
g▶
• Line B: Pull-out(Slewing) Characteristic • Rotational Speed
Showing the relationship between input frequency and the The rotational speed(frequency) of stepping motor is normally
heon
maximum torque(pull-out torque) obtainable by synchronizing expressed in pps(pulse per second.) ◀Inc
the motor rotation with that input frequency which is gradually The drive frequency and rotational speed has the following
increased from the pull-in characteristic range after start of the relationship. Rotational Speed RPM(revolution per minute)
motor. =Frequency (PPS)X60sec÷(360˚/single step angle)

• Point C: Max No Load Response • Hysteresis Accuracy

The maximum frequency at which the motor can start and stop, Difference between step angle
Torque (gf.cm) Head Office, R&D Center
synchronized with input signals under a no-load condition. of CW rotation and CCW rotation. A
B
405-827, 698 Inju-Daero, Namdong-Gu, Incheon-City, Korea
• Step Accuracy
E F
Tel : 82-32-810-9000 | Fax : 82-32-810-9100
Difference between theoretical and actual step angle. frequency rate (PPS) C D

Incheon, Korea Factory

STEPPING MOTOR CHARACTERISTICS 21643, 74B-16L Namdong Estate.,343
Stepping Motor is the motor which rotates a definite angle as the excitation condition varies with the input pulse signal. Cheongneung-daero, Namdong-Gu, Incheon-City, Korea
1) The angular velocity of motor is exactly proportional to the number of input pulses. Tel : 82-32-810-9000 | Fax : 82-32-810-9100
2) The angular error per 1 step is small and the error is not accumulated.
3) The responses of stopping and rotating are exellent.
4) Open-Loop-control is practicable and circuit structure of system is simple.
5) It is possible to get low speed driving with a load directly connected to the axis of the motor. Manila, Philippines Factory
6) The control of stop position is possible without break. Lot 1, Phase FPIP Brgy. Sta. Anastacia, Sto. Tomas, Batangas, 4234, Philippines
7) The rotational speed is obtained with proportational to the frequency of pulse signal. And it is possible to change speed widely from low to high.
Tel : 63-43-405-5021~2 | Fax : 63-43-405-5026

From MOATECH
MOATECH has achieved the advanced
level of quality in process control