Scribd
Upload
312 views1 page

Tetra S 316L-G: Technical Data Sheet Cored Welding Wire

Tetra S 316L-G is a rutile flux cored stainless steel wire for gas shielded arc welding with 19% chromium, 12% nickel, and 3% molybdenum. It has exceptional resistance to moisture pick up and provides an attractive bead appearance, automatic slag removal, very good penetration, and high productivity. It is suitable for welding stainless steels with alloy contents between 16-21% Cr, 6-13% Ni, and up to 3% Mo. Typical applications include welding of 316, 316L, 316LN, 316Ti, and 318 stainless steel grades.

Uploaded by

Peter Tvardzík
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
312 views1 page

Tetra S 316L-G: Technical Data Sheet Cored Welding Wire

Tetra S 316L-G is a rutile flux cored stainless steel wire for gas shielded arc welding with 19% chromium, 12% nickel, and 3% molybdenum. It has exceptional resistance to moisture pick up and provides an attractive bead appearance, automatic slag removal, very good penetration, and high productivity. It is suitable for welding stainless steels with alloy contents between 16-21% Cr, 6-13% Ni, and up to 3% Mo. Typical applications include welding of 316, 316L, 316LN, 316Ti, and 318 stainless steel grades.

Uploaded by

Peter Tvardzík
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

Technical Cored welding wire

data sheet
CAJMB180808
TETRA S 316L-G
CLASSIFICATION
ASME IIC SFA 5.22 / AWS A 5.22: E316LT0-4 - E316LT0-1
EN ISO 17633-A: T 19 12 3 L R M 3 - T 19 12 3 L R C 3
EN ISO 17633-B : TS316L-FB0
Equivalent Material number : 1.4430
ASME IX Qualification QW432 F-N° 6 QW442 A-N° 8
DESCRIPTION
• Rutile flux cored stainless steel wire for gas shielded arc welding
• 19% chromium - 12% nickel - 3% molybdenum - low carbon deposit
• Exceptional resistance to moisture pick up
• Attractive bead appearance, automatic slag release, very good penetration and high productivity
• Excellent X-ray soundness
• Maximum performances in the horizontal and downhand positions
• Welded with classical economical Ar-CO2 mixtures or CO2
APPLICATIONS
Tetra S 316L-G is suitable for welding stainless steels with an alloy content between 16 to 21% Cr, 6 to 13% Ni and up to
3% Mo, stabilised and unstabilised types. Service temperatures are typically -110°C to about 400°C.
Examples:
AISI UNS Material number EN Symbol
316 S31600 1.4401 X5 CrNiMo 17-12-2
316L S31603 1.4404 X2 CrNiMo 17-13-2
316LN S31653 1.4406 X2 CrNiMoN 17-12-2
316Ti S31635 1.4571 X6 CrNiMoTi 17-12-2
318 S31640 1.4583 X10CrNiMoNb 18-12
APPROVALS
TÜV, DB (43.128.10), DNV, GL, LR
TYPICAL ALL-WELD METAL ANALYSIS
C Mn Si Cr Ni Mo S P
0.03 1.40 0.80 19.0 12.0 2.80 0.008 0.020
Typical ferrite level: 8%
MINIMUM ALL-WELD METAL MECHANICAL PROPERTIES
Rm [MPa] Rp0.2% [MPa] A5 [%] KCV [J]
510 320 25 -60°C : 32
TYPICAL ALL-WELD METAL MECHANICAL PROPERTIES
Rm [MPa] Rp0.2%[MPa] A5 [%] KCV [J]
600 490 32 -60°C : 50
SHIELDING GAS
M21 gas mixtures (Ar + 5 - 25% CO2) or C1 (CO2) according to EN 439 / ISO 14175
OPERATING CONDITIONS
Diameter [mm] Current type Intensity [A] Voltage [V] Stick-out [mm] Gas flow
0.9 DC (+) 80 - 250 18 - 32 10 - 20 12 - 20 l/min.
1.2 DC (+) 100 - 280 23 - 33 10 - 25 12 - 20 l/min.
1.6 DC (+) 150 - 400 23 - 35 10 - 25 12 - 20 l/min.
WELDING POSITIONS
EN ISO 6947: PA, PB.
ASME IX: 1G, 1F, 2F.
PACKAGING
Diameter 0.9 mm 1.2 mm 1.6 mm
Spool type EN ISO 544 – ASME II C SFA-5.2 M
S200 BS300 S200 BS300 BS300
Weight 5 kg 15 kg 5 kg 15 kg 15 kg
Other packaging: please consult us

Welding Alloys declares that Tetra S 316L-G satisfies testing according to EN 13479. The conditions for CE marking specified in Annex ZA of the standard
have been complied with.

Welding products and techniques evolve constantly. All descriptions, illustrations and properties given in this data sheet are subject to
change without notice and can only be considered as suitable for general guidance. This document is intended to help the user make
the correct choice of product. It is his responsibility to assess its suitability for his intended application.

You might also like