62IN Series Miniature

Circular Bayonet-Coupled
Connectors AC6201 0717

62IN CONNECTORS
I ntroduction & Page Contents

Introduction
Amphenol 62IN series connectors are general purpose,
environment resistant , miniature circular connectors with three-
point bayonet coupling and five-key polarisation. Designed to meet
the requirements of MIL-C-26482, Series I solder type, these
connectors are widely used in applications calling for quick
disconnect connectors.

62IN connectors are intermateable and interchangeable with all MIl-

C-26482 connectors, whether solder or crimp type.
These connectors are used worldwide in military and industrial
applications and are available in a variety of sizes, styles and
configurations.

Amphenol 62IN series connectors are also approved to Indian

Defence Standard Joint Services Specifications JSS50813, certified
by the Electronic Components Standardisation Organisation
(LCSO), Bangalore, India.

Content Page
Introduction 1
General description 2

Insert orientations 3
Key / Keyway orientations 4
Insert arrangements 5
Connector styles 6-11

Dust covers 12
Accessories 13-15

Back-Shell 16-18
Specials and deviations 19

Ordering 62IN series connectors 20

1
G eneral Description

Amphenol 62IN series miniature circular bayonet-coupled solder connectors meet the most critical
application needs. Design versatility and high reliability performance makes this series ideal for
environmental sealing.

Shell

Shell hardware is manufactured from aluminum alloy and cadmium plated with an olive drab chromate
finish. This finish has excellent conductivity; it is non-reflectiing and corrosion resistant. Black anodised
finish and cadmium-free zinc cobalt plating are also available. For details, contact factory.

Shell styles consist of wall and box mounting receptacles, jam nut receptacles, cable mounting
receptacles and straight plugs. Connectors are available in 9 shell sizes : 8, 10, 12, 14, 1, 18, 20, 22
and 24.
Positive shell-to-shell keying is provided with keys and keyways in a choice of either normal (N) or any
of the preferred alternate positions: W,X,Y and Z. this prevents mismating between shells of different
orientations and overcomes the difficulties associated with rotated inserts and standard key/keyway
orientation. in the latter system, damage to inserts or contacts can result if excessive force is used to
engage non-mating halves.

Insert and grommet

The insert and grommet are moulded from resilient neoprene, offering high dielectric strength and
resistance to oils, gasoline and low temperature. This provides electrical isolation of the contacts in the
insert and excellent moisture sealing.

Contacts

Gold over nickel plated and socket contacts are machined from brass and designed for solder
connections. Industrial version crimp contacts are also available on request.

Specifications

Number of contacts 2 thru 61 in discrete steps

Operating temperature -55 C to +125 C
Current rating
Contact size Rated current Test current Potential drop
20 7.5A 7.5A 55mV
16 13A 13A 50mV
Voltage rating (max. operating voltage at sea level)
Service rating AC (rms)
I 600V
II 1000V
Insulation resistance 5000 Mohm
Voltage proof
Service rating Test voltage (rms)
I 1500V
II 2300V
Wire range accomodations
Contact size AWG wire size
20 24, 22 and 20
16 20, 18 and 16

2
I nsert Orientations

C C
C A A
A

B B B

Normal position of Alternate position of insert Alternate position of insert

insert with pin with socket contacts with pin contacts
contacts ( counterclockwise) ( clockwise)
Each diagram shows mating face of insert

Insert Orientation
arrangement Angles in degrees
W X Y Z
8-2 58 122 - -
8-3 60 210 - -
8-4 45 - - -
8-33 90 - - -
8-98 - - - -
10-2 - - - -
* 10-5 90 - - -
10-6 90 - - -
10-7 - - - -
10-8 - - - -
12-3 - - 180 -
12-4 38 - - -
12-8 90 112 203 292
12-10 60 155 270 295
12-12 - - - -
12-14 60 155 270 295
*14-02 - - - -
*14-04 45 - - -
14-05 40 92 184 273
*14-08 43 90 - -
14-12 43 90 - -
*14-14 17 110 155 234
14-15 17 110 155 234
14-18 15 90 180 270
14-19 30 165 315 -
16-8 54 152 180 331
16-23 158 270 - -
16-26 60 - 275 338
* 18-02 62 119 241 340
18-11 62 119 241 340
18-32 85 138 222 265
20-16 238 318 333 347
20-27 72 144 216 288
20-29 63 144 252 333
20-39 45 126 225 -
20-41 45 126 225 -
22-21 16 135 175 349
*22-36 16 135 175 349
22-41 39 135 264 -
*22-44 30 142 226 314
22-55 30 142 226 314
24-31 90 225 225 -
24-61 90 180 270 324

* Special insert arrangements consult factory

3
 I nsert Arrangements

Contact Legend
Symbol
Front face of pin insert or rear of socket insert Contact size 16 20
illustrated

A A A A
A F B F B B
C A A D A C A D
B A + + B A G G H
C B C
B C E C E C B 12-4
B B
- F
B C D
D D C
E

Insert arrangement 8-2 8-3 8-4 8-33 8-98 10-2 10-6 10-7 10-8 12-3 12-4
Service rating I I I I I II I I I II II
Number of contacts 2 3 4 3 3 2 6 7 8 3 4
Contact size 20 20 20 20 20 16 20 20 20 16 16

G B L A L A
L A
H A B C B A H A K B B
A C G B M K M N B
F H A D F H A K
G K J C H F E L J J R C C U C
E E B M
N R N J T P
B L K J D J M M K H J
D S R
14-14 D H
E F E D K F L C D
D C E P
N R G H G E
C N M E
D P E D F G F
F

Insert arrangement 12-8 12-10 12-12 12-14 14-5 14-12 14-14 14-15 14-18
Service rating I I I I II I I I I
Number of contacts 8 10 12 14 5 4 8 14 1 14 18
Contact size 20 20 20 20 16 16 20 20 16 20 20

J L A
P A R A A
A
A N B T U A K M B
R P S T S
M B Y S B C H B B
M K R e
N P N a U V C
L C G B C
b d J S N
U V R D C
L X Z T M Z V P c f W D
K D
c G C
T S H C D E L b j g
J E F K W U L Y W N Y X E H
V X h Z R P D
F M a F
H F D J E K F D
G E G G
H F J G E J E
G H L F
K H

Insert arrangement 14-19 16-8 16-23 16-26 18-11 18-32 20-16

Service rating I II I I II I II
Number of contacts 19 8 1 22 26 11 32 16
Contact size 20 16 16 20 20 16 20 16

A W A N A Y Z a b A
R BC M A
B V M U A
L B X u B v
P a S X B T V N c
U j Y D P S n W C t
C m p X
Z P W d
GG HH C
w
Z T i Z k L W R AA Q
N T s m E C k q Y
K Y s FF x e D
b z BB r D a V NN JJ
D h a R j GG CC Z f
d c S t F X y HH s E f b R C r EE PP y E
M U r n K U
Y E V S D P i FF DD a
J X g MM KK F
g
R g p
b
G N h
x EE t
u
F
e c S T
q DD LL z G
q w b
p h
L X V F f c J g v c
W T D CC AA
P H U T E f d d S BB H
W e d M n i
e G V
K G N J H L R J
F H H U E m k j
J H M L K G K J P
G F K
N L
M

Insert arrangement 20-27 20-41 22-21 22-55 24-31 24-61

Service rating I I II I I I
Number of contacts 27 41 21 55 31 61
Contact size 20 20 16 20 16 20

5
K ey / Keyway Orientations

C
A

Angles in degrees
Shell
size
N B C E F N B C E F N B C E F N B C E F
8 105 - - 118 82 35 - - 30 50 75 - - 100 75 50 - - 30 45
10 105 85 125 115 85 35 35 35 30 50 75 75 75 100 75 50 50 50 30 45
12 105 89 121 115 85 35 35 35 30 50 75 75 75 100 75 50 50 50 30 45
14 105 91 119 75 120 35 35 35 30 50 75 75 75 100 75 50 50 50 30 35
16 105 93 117 75 120 35 35 35 30 50 75 75 75 100 75 50 50 50 30 35
18 105 95 115 75 120 35 35 35 30 50 75 75 75 100 75 50 50 50 30 35
20 105 95 115 75 120 35 35 35 30 50 75 75 75 100 75 50 50 50 30 35
22 105 97 113 75 120 35 35 35 30 50 75 75 75 75 75 50 50 50 30 35
24 105 97 113 75 120 35 35 35 30 50 75 75 75 100 75 50 50 50 30 35

Shell Angle in degrees Angles shown are with reference to the major key
size or keyway. In receptacles, the major keyway
N B C E F always remains fixed in relation to the mounting
60 - - flange. For B, C, E and F orientations, the three
8 73 47
bayonet locations and associated minor keyways
10 60 40 80 70 50
are rotated completely as shown in the tables. The
12 60 44 76 70 50
accompanying diagram shows a receptacle shell
14 60 46 74 30 75
with keyways. Corresponding key orientations for
16 60 48 72 30 75 a mating plug shell are therefore always clockwise.
18 60 50 70 30 75
20 60 50 70 30 75
22 60 52 68 30 75
24 60 54 68 30 75

4
C onnector Styles

Wall Mounting Receptacles

C L
F

Y
D E B

Without termination assemblies All dimensions in mm

Shell B C D E F G L Y X
size Dia Dia Dia threads in inches

8 1.58 20.75 15.09 3.05 11.30 11.02 24.84 12.02 7/16-28 UNEF
10 1.58 23.93 18.26 3.05 11.30 14.17 24.84 14.99 9/16-24 NEF
12 1.58 26.32 20.63 3.05 11.30 17.35 24.84 19.05 11/16-24 NEF
14 1.58 28.70 23.10 3.05 11.30 20.52 24.84 22.23 13/16-20 UNEF
16 1.58 31.07 24.61 3.05 11.30 23.70 24.84 25.40 15/16-20 UNEF
18 1.58 33.45 26.58 3.05 11.30 26.85 24.84 28.58 1 1/16-18 NEF
20 2.03 36.63 29.36 3.05 14.10 30.02 26.62 31.75 1 3/16-18 NEF
22 2.03 39.80 31.75 3.05 14.10 33.20 26.62 34.93 1 5/16-18 NEF
24 2.03 42.98 34.93 3.74 14.99 36.37 26.62 38.10 1 7/16-18 NEF

Note: Serrations / antirotation feature is not provided on shells for 10A, 10E and 10F styles.

L L L L
G over
Knurl

G
H
G

Style 10A Style 10E Style 10F Style 10J 10PHM/EGM

With termination assemblies All dimensions in mm

Style 10A Style 10E Style 10F Style 10J
Shell M For cable size
G L G L G H L G L
size thread Z Dia
Dia Dia Dia Dia Dia
in inches min max
8 14.25 41.25 1/2-28 UNEF 14.25 32.54 21.03 3.96 44.76 14.25 46.89 4.28 5.84
10 17.43 41.25 5/8-24 NEF 17.43 32.54 22.63 4.78 44.76 17.43 46.89 5.21 7.93
12 20.60 41.25 3/4-20 UNEF 20.60 32.54 25.81 7.93 44.76 20.80 49.45 8.59 11.23
14 23.78 41.25 7/8-20 UNEF 23.78 32.54 28.98 9.58 44.10 23.78 54.54 10.57 13.69
16 26.98 41.25 1-20 UNEF 26.98 32.54 30.56 12.70 47.65 26.98 59.61 13.97 15.65
18 30.12 41.25 1 3/16-18 NEF 30.12 32.54 36.22 15.87 47.65 30.12 64.70 15.24 17.07
20 33.30 42.85 1 3/16-18 NEF 33.30 35.13 36.22 15.87 53.80 33.30 71.91 16.13 18.98
22 36.47 42.85 1 7/16-18 NEF 36.47 35.13 39.80 19.05 53.80 36.47 76.99 17.02 21.49
24 39.65 43.94 1 7/16-18 NEF 39.65 35.13 44.07 20.32 57.15 39.65 78.08 18.80 22.71

6
C onnector Styles

Box Mounting Receptacles

L L
C
F F

Y
G

Y
K
J
B B
D E
A H A

Style 12E Style 12E(219)

solder film wire terminations

All dimensions in mm
Style 12E Style 12E(219)
Shell B C D E F G Y
A L H J K L
size A
Dia Dia Dia min max min max
8 1.58 20.75 15.09 3.05 11.30 11.02 12.02 20.32 24.84 20.32 4.22 5.03 2.26 0.70 0.76 24.95
10 1.58 23.93 18.26 3.05 11.30 14.17 14.99 20.32 24.84 20.32 4.22 5.03 2.26 0.70 0.76 24.95
12 1.58 26.32 20.63 3.05 11.30 17.35 19.05 20.32 24.84 20.32 4.22 5.03 2.26 0.70 0.76 24.95
14 1.58 28.70 23.01 3.05 11.30 20.52 22.23 20.32 24.84 20.32 4.22 5.03 2.26 0.70 0.76 24.95
16 1.58 31.07 24.61 3.05 11.30 23.70 25.40 20.32 24.84 20.32 4.22 5.03 2.26 0.70 0.76 24.95
18 1.58 33.45 26.97 3.05 11.30 26.85 28.58 20.32 24.84 20.32 4.22 5.03 2.26 0.70 0.76 24.95
20 2.03 36.63 29.36 3.05 14.10 30.02 31.75 22.23 26.62 22.23 3.89 4.70 1.93 0.70 0.76 26.85
22 2.03 39.80 31.75 3.05 14.10 33.20 34.93 22.23 26.62 22.23 3.89 4.70 1.93 0.70 0.76 26.85
24 2.03 42.98 34.93 3.74 14.99 36.37 38.10 22.23 26.62 22.23 3.89 4.70 1.93 0.70 0.76 26.85

Mounting data
Panel cutouts
Wall mounting receptacles

L D E
F
G

K R

J
B
S
H A

Style 12E(220)
film wire terminations All dimensions in mm
All dimensions in mm Shell D E R S
Shell A H J K L size Dia Dia
size min max min max 8 15.09 3.05 14.42 31.73
8 20.32 7.95 8.00 4.60 0.70 0.76 28.32 10 18.26 3.05 17.53 34.52
10 20.32 7.95 8.00 4.60 0.70 0.76 28.32 12 20.63 3.05 21.84 38.89
12 20.32 7.95 8.00 4.60 0.70 0.76 28.32 14 23.01 3.05 25.15 42.06
14 20.32 7.95 8.00 4.60 0.70 0.76 28.32
16 24.61 3.05 28.19 45.24
16 20.32 7.95 8.00 4.60 0.70 0.76 28.32
18 26.97 3.05 31.49 48.03
18 20.32 7.95 8.00 4.60 0.70 0.76 28.32
20 22.23 7.95 8.00 4.60 0.70 0.76 30.23 20 29.36 3.05 35.54 51.59
22 22.23 7.95 8.00 4.60 0.70 0.76 30.23 22 31.75 3.05 37.85 52.76
24 22.23 7.95 8.00 4.60 0.70 0.76 30.23 24 34.93 3.74 41.15 57.84

Note: 1) Style 220 is also available for 57A type receptacles with similar termination dimensions as 12E(220) style shown above.
2) For other available PC tail contact detail, contact factory.
7
C onnector Styles

Jam Nut Receptacles

L L
F F
C K K

M
M
Y

Y
D

J B X B X
H
Style 57A Style 57A(219)
solder film wire terminators

Without termination assemblies All dimensions in mm

B C D F H K Style Style Y X
J M
Panel 57A 57A
Shell Dia. Dia. Thread
Thickness (219)
Min. Max. Min. Max. in
size L L
Min. Max. inches
8 2.97 23.93 0.70 0.76 17.93 3.38 4.40 19.05 1.58 3.18 24.84 24.79 13.39 12.03 9/16-24 NEF
10 2.97 27.10 0.70 0.76 17.93 3.38 4.40 22.23 1.58 3.18 24.84 24.79 16.56 14.99 11/16-24 NEF
12 31.88 0.76 17.93 3.38 4.40 26.98 1.58 3.18 24.84 24.79 20.70 19.05 7/8-20 UNEF
2.97 0.70
14 2.97 35.05 0.70 0.76 17.93 3.38 4.40 30.15 1.58 3.18 24.84 24.79 23.85 22.26 1-20 UNEF
16 2.97 38.23 0.70 0.76 17.93 3.38 4.40 33.32 1.58 3.18 24.84 24.79 27.00 25.40 1 1/8-18 NEF
18 2.97 41.40 0.70 0.76 17.93 3.38 4.40 36.50 1.58 3.18 24.84 24.79 30.18 28.58 1 1/4-18 NEF
20 3.76 46.15 0.70 0.76 22.71 3.38 4.40 38.68 1.58 6.35 26.62 30.35 33.35 31.75 1 3/8-18 NEF
22 3.76 49.33 0.70 0.76 22.71 3.38 4.40 42.85 1.58 6.35 26.62 30.35 36.53 34.93 1
24 3.76 52.50 0.70 0.76 23.55 3.38 4.40 46.05 1.58 6.35 26.62 30.35 39.70 38.10 1 5/8-18 NEF

L
Mounting data
F
Panel cutouts
K

S
G

M
Y

Z
S

B X R

Style 14E
With termination assemblies All dimensions in mm
Shell G L Shell N R S
size Dia. size Dia.
8 18.11 34.14 8 13.72 14.53 31.75
10 21.29 34.14 10 16.89 17.70 34.52
12 24.46 34.14 12 21.03 22.48 38.89
14 27.63 34.14 14 24.18 25.65 42.06
16 30.81 34.14 16 27.33 28.83 45.24
18 33.98 34.14 18 30.50 32.00 48.03
20 37.16 40.03 20 33.68 35.18 51.59
22 40.33 40.03 22 36.86 38.35 54.76
24 43.51 40.87 24 40.03 41.45 57.84

8
C onnector Styles

Jam Nut Receptacles

N
C sq S
N A Max.
F X
L A/F B K

G Y M
62 IN - 57T
Single hole mounting with
threaded shell to accept
accessories All dimensions in mm

Shell A B C F G K L M N Y X
max +0.05 max +0.005 Dia. min Max -0.005
Size (+0.13) sq. (+0.13) Max. (-0.13) Thread
0.978 0.117 0.942 0.595 0.426 0.062 0.125 0.750 0.527 7/16-28 UNEF 0.473
08 24.84 2.97 23.93 15.12 10.82 1.58 3.58 19.05 13.3 12.03 9/16-24 NEF
0.978 0.117 1.067 0.595 0.552 0.062 0.125 0.875 0.652
10 24.84 2.97 27.10 15.12 14.02 1.58 3.18 22.23 16.56 9/16-24 UNEF 0.590
14.99 11/16-24 NEF
0.978 0.117 1.255 0.595 0.677 0.062 0.125 1.062 0.825 11/16-24 UNEF 0.750 7/8-20 UNEF
12 24.84 2.97 31.88 15.12 17.20 1.58 3.18 26.98 20.70 19.05
12 0.978 0.117 1.380 0.595 0.802 0.062 0.125 1.187 0.939 13/16-20 UNEF 0.875 1-20 UNEF
24.84 2.97 35.05 15.12 20.37 1.58 3.18 30.15 23.85 22.23
16 0.978 0.117 1.505 0.595 0.927 0.062 0.125 1.312 1.063 15/16-20 UNEF 1.000 1.1/18-18 NEF
24.84 2.97 38.23 15.12 23.55 1.58 3.18 33.32 27.00 25.40
0.978 0.117 1.630 1.595 1.052 0.062 0.125 1.437 1.188 1.125
18 24.84 2.97 41.40 15.12 26.72 1.58 3.18 36.50 30.18 1 1/16-18 UNEF 28.58 1.1/4-18 NEF

20 1.048 0.148 1.817 0720 1.167 0.062 0.250 1.562 1.313 1 3/16-18 UNEF 1.250 1.3/8-18 NEF
26.62 3.76 46.15 18.29 29.65 1.58 6.35 38.68 33.35 31.75
1.048 0.148 1.942 0720 1.292 0.062 0.250 1.687 1.438 1 5/16-18 UNEF 1.375
22 26.62 3.76 49.33 18.29 32.82 1.58 6.35 42.85 36.53 34.93 1.1/2-18 NEF
1.048 0.148 2.067 0.753 1.416 0.062 0.250 1.812 1.563 1 7/16-18 UNEF 1.500 1.5/8-18 NEF
24 26.62 3.76 52.50 19.13 35.97 1.58 6.35 46.05 39.70 38.10

C sq A max.
K X

62 IN - 14F
Single hole mounting with M Y
G H max.
grommet and grommet nut fitted O/all
with integral strain relief clamp rear dia.

has panel ‘O’ ring seal

L B F

A B C F G H K K L M N R S Y X
Shell
+0.05 max +0.005 dia +0.005 -0.005 +0.005 +0.005
Size max (+0.13) min 3.18 14.05 Thread
sq, (+0.13) max (+0.13) (-0.13) (+0.13) (+0.13)
1.762 0.117 0.942 0.706 0.828 0.156 0.062 0.750 0.125 0.527 0.540 0.572 1.250 0.473
08 9/16-24 NEF
44.75 2.97 23.93 17.93 21.03 3.96 1.58 3.175 19.50 13.3 1372 14.53 31.75 12.03
1.762 0.117 0.067 0.706 0.891 0.188 0.062 0.125 0.875 0.652 0.665 0.697 1.359 0.590 11/16-124 NEF
10
44.75 2.97 27.10 17.93 22.63 4.78 1.58 3.18 22.23 16.56 16.89 17.70 34.52 14.99
1.762 0.117 1.255 0.706 1.016 0.312 0.062 0.125 1.062 0.815 0.828 0.885 1.531 0.750
12 7/8-20 UNEF
44.75 2.97 31.88 17.93 25.81 7.93 1.58 3.18 26.98 20.70 21.03 22.48 38.89 19.05
14 1.736 0.117 1.380 0.706 1.141 0.375 0.062 0.125 1.187 0.939 0.952 1.010 1.656 0.875
1-20 UNEF
44.10 2.97 35.05 17.93 28.97 9.35 1.58 3.18 30.15 23.85 24.18 25.65 42.06 22.23
16 1.876 0.117 1.505 0.706 1.203 0.500 0.062 0.125 1.312 1.063 1.076 1.135 1.781 1.000
1.1/8-18 NEF
47.65 2.97 38.23 17.93 30.56 12.7 1.58 3.18 33.32 27.00 27.33 28.83 45.24 25.40
18 1.876 0.117 1.630 0.706 1.426 0.625 0.062 0.125 1.437 1.188 1.201 1.260 1.891 1.125 1.1/4-18 NEF
47.65 2.97 41.40 17.93 36.22 15.88 1.58 3.175 36.50 30.18 30.50 32.00 48.03 28.58
2.118 0.148 1.817 0.894 1.426 0.625 0.062 0.250 1.562 1.313 1.326 1.385 2.031 1.250 1.3/8-18 NEF
20 53.8 3.76 46.15 22.71 36.22 15.88 1.58 6.35 38.68 33.35 33.68 35.18 51.59 31.75
22 2.118 0.148 1.942 0.894 1.567 0.750 0.062 0.250 1.687 1.438 1.451 1.510 2.156 1.375 1.1/2-18 NEF
53.8 3.76 49.33 22.71 39.80 19.05 1.58 6.35 42.85 36.53 36.86 38.35 54.76 34.93
2.250 0.148 2.067 0.927 1735 0.800 0.062 0.250 1.812 1.563 1.576 1.635 2.277 1.500 1.5/8-18 NEF
24
57.15 3.76 52.50 23.55 44.07 20.32 1.58 6.35 46.05 39.70 40.03 41.45 57.84 38.10

9
C onnector Styles

Cable Mounting Receptacles

L
C
F

X B

Without termination assemblies All dimensions in mm

Shell B C F L Y X
thread
size Dia
in inches
8 2.39 20.75 10.54 24.84 12.03 7/16-28 UNEF
10 2.39 23.93 10.54 24.84 14.99 9/16-24 NEF
12 2.39 26.32 10.54 24.84 19.05 11/16-24 NEF
14 2.39 28.70 10.54 24.84 22.23 13/16-20 UNEF
16 2.39 31.07 10.54 24.84 25.40 15/16-20 UNEF
18 2.39 33.45 10.54 24.84 28.58 1 1/16-18 NEF
20 2.59 36.63 13.59 26.62 31.75 1 3/16-18 NEF
22 2.59 39.80 13.59 26.62 34.93 1 5/16-18 NEF
24 2.59 42.98 14.53 26.62 38.10 1 7/16-18 NEF

L L L L
G

G
H

G
Z
G

Style 11A Style 11E Style 11F Style 11J 11PHM/EGM

With termination assemblies All dimensions in mm

Style 11A Style 11E Style 11F Style 11J
Shell G L M G L G H L G L For cable size
size Dia thread Dia Dia Dia Dia Z Dia
in inches
8 14.25 41 .25 1/ 2-28 UNEF 14 .25 32 .54 21.03 3.9 6 44.76 14.25 46.89 4.2 8 5.84
10 17.43 41.25 5/ 8-2 4 NEF 17 .43 32 .54 22 .63 4.7 8 44 .76 17 .43 46.89 5.2 1 7.9 3
12 20.60 41.25 3/ 4-2 0 UNEF 20.60 32.54 25.81 7.9 3 44 .76 20.60 49.45 8.5 9 11 .23
14 23.78 41.25 7/ 8-2 0 UNEF 23.78 32.54 28.97 9.5 3 44 .10 23.78 54.54 10.57 13 .69
16 26.95 41.25 1-20 UNEF 26 .95 32 .54 30 .56 12.70 47.65 26 .95 59 .61 13 .97 15.65
18 30.13 41.25 1 3/16-18 NEF 30 .13 32 .54 36 .22 15.88 47.65 30 .13 64 .70 15.24 17 .07
20 33.30 42.85 1 3/16-18 NEF 33 .30 35 .13 36 .22 15.88 53.80 33 .30 71 .91 16.13 18 .98
22 36.75 42.85 1 7/16-18 NEF 36 .75 35 .13 39 .80 19.05 53.80 36 .75 76 .99 17.02 21 .49
24 39.65 43.95 1 7/16-18 NEF 39 .65 35 .13 44 .07 20.32 57.15 39 .65 78 .03 18.80 22 .71

10
 C onnector Styles

16

C L

Without termination assemblies All dimensions in mm

Shell C X
L
size Dia in inches
8 19.60 24.79 7/16-28 UNEF
10 22.35 24.79 9/16-24NEF
12 26.49 24.79 11/16-24 NEF
14 29.90 24.79 13/16-20 UNEF
16 33.07 24.79 15/16-20 UNEF
18 35.33 24.79 1 1/16-18 NEF
20 38.89 26.79 1 3/16-18 NEF
22 42.06 26.79 1 5/16-18 NEF
24 45.14 26.79 1 7/16-18 NEF

L L L L

G
G
H
G

Z
G

Style 16A Style 16E Style 16F Style 16J 16PHM/EGM

With termination assemblies

Style 16 A Style 16 E Style 16 F Style 16 J
Shell G L M G L G H G L For cable size
Thread
L Z Dia
size Dia Dia Dia Dia Dia
min max
In Inches
8 14.25 41.00 1/2-28 UNEF 14.25 32.54 21.03 3.96 44.50 14.25 46.64 4.28 5.84
10 17.43 41.00 5/8-24 NEF 17.43 32.54 22.63 4.78 44.50 17.43 46.64 5.21 7.93
12 20.60 41.00 3/4-20 UNEF 20.60 32.54 25.81 7.93 44.50 20.60 49.20 8.59 11.23
14 23.78 41.00 7/8-20 UNEF 23.78 32.54 28.97 9.53 43.84 23.78 54.28 10.57 13.69
16 26.95 41.00 1-20 UNEF 26.95 32.54 30.56 12.70 47.40 26.95 59.36 13.97 15.65
18 30.13 41.00 1 3/16-18 NEF 30.13 32.54 36.22 15.88 47.40 30.13 64.45 15.24 17.07
20 33.30 41.00 1 3/16-18 NEF 33.30 32.54 36.22 15.88 51.81 33.30 70.05 16.13 18.98
22 36.75 41.00 1 7/16-18 NEF 36.75 32.54 39.80 19.05 51.81 36.75 75.13 17.02 21.49
24 39.65 42.11 1 7/16-18 NEF 39.65 32.54 44.07 20.32 55.32 39.65 76.25 18.80 22.71
Notes: 1. Plugs are also available with heavy duty ribbed coupling ring, to order, add deviation (044) at the end of plug part
number.

11
D ust Covers

Metallic Dust Covers

Standard is olive drab chromate finish over cadmium plating with straight knurling. To order add suffix -XX to required style, where
XX specifies shell size. It is strongly recommended that these are fitted to provide protection when connectors are not in use. For
alternate finishes or dust covers with heavy duty ribs, contact factory for further details and part number. Dust cap with Nylon cord is also
available. Contact factory for further details.

For receptacles
Dust cover style To fit receptacle
with chain with nylon cord style
62IN-736 62IN-813 Jam nut
62IN-737 62IN-814 Cable mounting
62IN-738 62IN-812 Wall and box mounting

C H Knurl
B

For plugs
Dust cover style
with chain with nylon cord
62IN-742 62IN-810

C
B

All dimensions in mm
B J Dia
Shell C A C 736 737 738
size chain / cord for for Dia 813 814 812
For Plug
Max. length receptacles plugs receptacles 742
810
8 18.26 76.20 14.27 14.27 18.64 14.68 11.63 4.49 max.
10 21.44 76.20 14.27 14.27 21.82 17.86 14.81 4.49 max.
12 25.40 88.90 14.27 14.27 25.40 22.63 17.98 4.49 max.
14 28.58 88.90 14.27 14.27 28.57 25.81 22.76 4.49 max.
16 31.75 88.90 14.27 14.27 31.75 29.39 25.93 4.49 max.
18 34.92 88.90 14.27 14.27 34.92 32.16 29.11 4.49 max.
20 38.10 101.60 14.27 15.88 38.10 35.33 32.28 4.49 max.
22 41.28 101.60 14.27 15.88 41.27 38.51 35.46 4.49 max.
24 44.45 101.60 15.29 16.71 44.45 41.68 38.63 4.49 max.

Notes: For more detailed information refer connector Accessory catalog.

12
A ccessories

Strain Relief Clamp With Grommet

(Replace XX-XX with the required insert arrangement) 62IN-585-XX-XXS or XXP

A

G H

All dimensions in mm

A G H
Shell size
max max max
8 25.17 21.03 4.09
10 25.17 22.63 4.90
12 25.17 25.81 8.05
14 24.51 28.98 9.65
16 28.07 30.56 12.83
18 28.07 36.22 16.00
20 32.64 36.22 16.00
22 32.64 39.80 19.18
24 34.88 44.07 20.45

Shell To Accept Conduit

(Replace XX with the required shell size) 62IN-776-XX

A

M
All dimensions in mm

A M
Shell size
max Thread in inches
8 23.80 1/2-28 UNEF
10 23.80 5/8-24 NEF
12 23.80 3/4-20 UNEF
14 23.80 7/8-20 UNEF
16 23.80 1-20 UNEF
18 23.80 1 3/16-18 NEF
20 23.80 1 3/16-18 NEF
22 23.80 1 7/16-18 NEF
24 23.80 1 7/16-18 NEF

13
A ccessories

62IN - SQ Adaptors
Ink Mark A Conn. No. & L
For Shielded Cables Batch Code As Per Bom. ‘SW’ 3.5

C G
THD.
D
V

Knurled Nut
Coupling Nut Retainer Ring Cable Housing

RECOMME
‘V’ THD. C D G L SW NDED
SIZE AT’X P/NO.
UNEF-2B MIN. MAX. +0.5
-0.0 MAX. -0.2
TORQUE’S
(Nm)

08 62IN-08-SQ 7/16 -28 6.6 20 16 36 18 4 +0.50

10 62IN-10-SQ 9/16 -24 9.2 23 18 36 21 6 +0.50
12 62IN-12-SQ 11/16 -24 12.2 27 22 36 24 8+1.0
-
14 62IN-14-SQ 13/16 -20 15.2 30 25 37 28
10+1.0
-
16 62IN-16-SQ 15/16 -20 18.3 33 28 31
18 62IN-18-SQ 1 1/16 -18 20.0 36 32 34
20 62IN-20-SQ 1 3/16 -18 23.0 40 34 37
13+1.0
-
22 62IN-22-SQ 1 5/16 -18 26.0 43 38 41
24 62IN-24-SQ 1 7/16 -18 28.8 46 41 37 44

62IN - Shrink Boot Adaptors

F
For Unshielded Cables 0.50 X 45 G 3.5
Chamfer H
Thread

M
B

C
A

E
‘V’

‘X’

‘A’ ‘B’ ‘C’ ‘D’ ‘E’ ‘F’ ‘G’ ‘H’ ‘V’ THREAD. ‘M’
SIZE ATX P/NO
-0.3 -0.2 +0.2 +0.5 UNEF -2B +0.1
08 62IN-108559 15.4 14.0 13.1 9.2 15.1 7/16 -28 10.2
10 62IN-108560 18.6 17.0 15.9 12.1 17.9 9/16 -24 13.3
17.5
12 62IN-108561 21.8 20.3 21.2 15.1 23.2 11/16 -24 16.5
14 62IN-108562 25.0 23.3 22.1 18.4 24.0 13/16 -20 19.5
5.50 4.50
16 62IN-108563 28.2 26.4 26.0 21.6 29.3 20.0 15/16 -20 22.6
18 62IN-108564 31.3 29.5 28.4 24.1 31.5 20.0 1 1/16 -18 25.6
20 62IN-108565 34.5 32.7 32.3 27.3 35.6 21.3 1 3/16 -18 28.8
22 62IN-108566 37.7 35.8 34.7 30.5 38.0 21.3 1 5/16 -18 32.0
24 62IN-108567 40.9 39.0 37.9 33.7 41.0 20.0 5.00 4.00 1 7/16 -18 35.2

14
A ccessories

Flange Mounting Gasket

62IN-760-XX
(Replace XX with the required shell size) D Sq H

G E

All dimensions in mm

Shell D E F Dia G Dia H

size max

8 20.62 15.08 12.90 3.30 1.06

10 23.82 18.26 16.07 3.30 1.06
12 26.18 20.65 19.25 3.30 1.06
14 28.57 23.01 22.42 3.30 1.06
16 30.96 24.61 25.60 3.30 1.06
18 33.32 27.00 28.77 3.30 1.06
20 36.52 29.36 31.95 3.30 1.06
22 39.70 31.75 35.13 3.30 1.06
24 42.87 34.92 38.30 3.96 1.06

PG Adaptors with ‘O’ ring

X PG
B

L
All dimensions in mm
X Thread
Part number For shell size A B L PG Thread
in inches
62IN08-PG7 8 7/16-28 UNEF 16.50 14.50 20.00 PG7

62IN10-PG9 10 9/16-24 NEF 22.00 17.70 20.00 PG9

62IN12-PG9 12 11/16-24 NEF 22.00 21.00 20.00 PG9

62IN14-PG13.5 14 13/16-20UNEF 28.00 23.50 25.00 PG13.5

62IN16-PG9 16 15/16-20 U NEF 29.00 27.80 30.00 PG 9

62IN18-PG16 18 1 1/16 -18 NEF 31 .50 31.00 35 .00 PG16

62IN20-PG21 20 1 3/16-18 NEF 35. 00 34.00 40.00 Pg21

62IN22PG13.5 22 1 5/16 NEF 26.00 37.20 40.00 PG13.5

62IN24-PG16 24 1 7/16-18 NEF 41.50 40.50 40.00 PG16

15
B ack-Shell

EGM/PHM Adaptor

“E” Thread

*Metal Sleeve

Cable Size
“C”

*EGM - Supplied with metal sleeve for shielded cable

PHM - Supplied without metal sleeve for unshielded cable

Shell “C” Ref. PG Size “E” Thread

size (Cable Size in mm) For Straight

8 PG 11 7/16” -28 UNEF

10 PG 11 9/16” -24 NEF

12 30.00 PG 11 11/16” -24 NEF

14 PG 21 13/16” -20 UNEF

16 PG 21 15/16” -20 UNEF

18 PG 21 1 1/16” -20 UNEF

20 PG 21 1 3/16” -18 UNEF

22 35.00 PG 21 1 5/16” -18 NEF

24 PG 21 1 7/16” -18 UNEF

EGM/PHM11 Can accept cable Min 5.70 mm & Max 10.85 mm

EGM/PHM21 Can accept cable Min 12.70 mm & Max 17.85 mm

16
B ack-Shell

Shrink Boot Adaptor

‘V’ THREAD 3.56/3.50

‘A’

‘D’

‘B’ ‘C’

10.80 MAX.
INK MARK A CONN. NO.
AS PER BOM. 28.58 MAX.

SHELL A B C D ‘V’ THREAD

+ 0.0 + 0.20 CONNECTORS P/NO.
SIZE UNEF-2B
MAX. MIN. - 0.51 - 0.0
08 15.67 6.35 13.54 7 / 16” -28 M85049 / 60-1-W-8-IN

10 18.64 9.02 15.37 9 / 16” -24 M85049 / 60-1-W-10-IN

12 21.79 12.47 19.66 11 / 16” -24 M85049 / 60-1-W-12-IN

1.12
14 24.99 14.35 21.29 13 / 16” -20 M85049 / 60-1-W-14-IN

16 28.24 17.53 24.46 15 / 16” -20 M85049 / 60-1-W-16-IN

18 30.94 19.53 26.47 1 1 / 16” -18 M85049 / 60-1-W-18

20 34.16 22.71 30.91 1 3 / 16” -18 M85049 / 60-1-W-20

22 32.79 25.88 34.42 1.75 1 5 / 16” -18 M85049 / 60-1-W-22

24 40.46 28.80 36.65 1 7 / 16” -18 M85049 / 60-1-W-24

17
B ack-Shell

Right Angle Backshell

L
B
‘C’

Shell A B ‘C’ L
DRG. No. +- 0.13
Size MAX. -2A THREAD. MAX.
8 500238-8 18.85 7.30 9/16”-24NEF 20.80
10 500238-10 21.70 10.18 5/8”-24UNEF 21.70
12 500238-12 24.60 13.35 3/4”-20UNEF 23.35
14 500238-14 27.85 16.26 7/8”=20UNEF 24.85
16 500238-16 31.2. 19.40 1”-20UNEF 26.45
18 500238-18 34.15 22.00 28.70
1 3/16”-18UNEF
20 500238-20 37.25 24.20 29.60
22 500238-22 40.65 28.50 31.60
1 7/16”-18NEF
24 500238-24 44.00 31.65 33.60

JC Clamp Backshell
‘L’
‘A’

‘B’

A B C D ‘L’
Shell
MAX
Size MAX.
MIN. MAX. +-0.13 Closed MAX.
8 4.28 5.84 3.96 21.03
4.75
10 5.21 7.93 4.78 22.63 40.50
12 8.59 11.23 7.93 25.81 7.14
14 10.57 13.69 9.58 28.97 8.26 48.00
16 13.97 15.65 12.70 30.56 9.04 54.50
18 15.24 17.07 15.88 36.22 11.58 59.00
20 16.13 18.98 15.88 36.22 67.00
13.18
22 17.02 21.49 19.05 39.80 73.40
24 18.80 22.71 20.32 44.07 16.69 77.00

18
S pecials and Deviations

Industrial Version Crimp Contacts

62IN series connectors are also available with rear release crimp contacts for industrial applications.
These contacts can be crimped to wires outside the connector and then inserted into place with the help
of designated tools. Connector maintenance is simplified because damaged contacts can be removed by
using the designated removal tool and replaced with a new contact. Spare contacts are also available.
Standard deviations for finishes & features
Deviation number Description
(4) Gold flash on contacts
(5) Crim p contact
(044) Rough grip heavy duty coupling ring (for plugs only)
(218) Coupling ring w i t h lever arrangement
(219) Film w i r e termination (short) for flexible printed w i r i n g (57A and 12E styles only)
(220) Film w i r e termination(long) for flexible printed w i r i n g (57A and 12E styles only)
(221-231) Different film wire PC tail contact for flexible printed wiring (57A &12E styles only- Details contact factory)

(416) Electroless Nickel Plating

*(608) Black anodised finish
(622) Cadmium free zinc-cobalt Plating-olive drab finish
(624) Cadmium free zinc-cobalt Plating-black finish
(0PX) Premating contact (X denotes premating contact designation)

(714) Cadmium over electroless Nickel

(720) Cadmium plating with black chromate

(725) Zinc plating with olive drab finish

(726) Electrophoratic Finish
(56T) Plug connector with threaded shell & serration to accept the cable accessories
(15A) Plug connector with threaded shell to accept the cable accessories
(LC) Less contact

C04:-Crimp connectors with few solder contact (Position need to mention)

Specials
For special requirements, please contact factory with specifications and drawings. Amphenol has in-house capability to meet
and custom build your special requirements for its range of MIL-C-26482 62IN series connectors.
* Consult factory for availability.
Recommended Tightening Torques
A) Single hole Fixing Receptacle ( Panel Nut tightening)
Shell Size 8 10 12 14 16 18 20 22 24
Nm 3.73 4.07 6.78 7.34 8.25 9.26 11.98 13.9 15.03
Lbf.ins 33 36 60 65 73 82 106 123 133

B) Accessory Tightening
Shell Size 8 10 12 14 16 18 20 22 24
Nm 3.79-3.96 3.96-4.52 4.52-5.09 5.09-5.65 5.65-6.78 6.78-7.91 8.48-9.04 9.61-10.17 10.74-11.3
Lbf.ins 25-40 35-40 40-45 45-50 55-60 65-70 75-80 85-90 95-100

Crimping Tool
Contact size Crimp Tool Turret Head (ASTRO)
20
M22520/1-01 650106
16

Insertion & Removal Tool

Contact size Insertion Removal Tool Part Number

20 62IN-IR-20
16 62IN-IR-16

19
O rdering 62IN Series Connectors

To obtain a specific connector number, write down the connector number from the typical example below. Only inserts shown on page 5
can be specified. Connectors are delivered with protective dust caps. Deviations specified on page 15 must be included at the end of the
connector number whenever required.

62IN 5 7 E - 18 - 32 P X

Series designation
62IN - MIL -C-26482 series I
miniature bayonet lock
Key specification
1 - as per MIL-C-26482
5 - as per BS 9522 F0017
Deviations
See page 19
Shell style
0 - Wall mounting receptacle
1 - Cable connecting
receptacle
Orientation
2 - Box mounting receptacle Inserts -
4 - Jam nut receptacle,
Internally threaded with
W-X-Y-Z
Cable accessories (Omit for normal)
5 - Plug without back OR
accessories Key / Keyway -
6 - Plug B-C-E-F
7 - Jam nut receptacle, plain See pages 3 and 4.
Shell
8 - Right Angle Back Shell
with cable clamp (less grommet)
Contact style
Connector class P - Pin contacts
A- Plain shell, exposed solder S - Socket contacts
Buckets, no grommet.
E- Insert and grommet with
Grommet nut (excluding 12E
Which has plain shell and no
Grommet or grommet nut). Insert arrangement
F- Same as E, but grommet nut
With strain relief clamp. First box indicates shell size -
8, 10, 12, 14, 16, 18, 20, 22, 24.
J- Same as E, but with resilient
Gland seal and nut for
Unscreened jacketed cable, Both boxes together indicate the exact
No grommet. insert arrangement.
JC - Backshell for unscreened Jacketed
cable with strain relief clamp. See page 5.

T- Threaded shell for cable

Accessories, exposed solder
Buckets.
Shell finish (Deviations)
TG - Same as T, but shell has
Grounding fingers. Standard-Cadmium plating with
olive drab chromate finish
PGXX
- - Connector with PG threaded Alternate finishes
Backshell to accept PG gland 1. Cadmium free zinc-
(Specify XX –Thread size)
cobalt plating with olive drab
MXX - Connector with Metric Backshell chromate finish
to accept Metric gland
(Specify XX –Thread size) Ref page No. 19 for codes
PHM - Supplied with different diameter For details contact factory
sleeves to suit varying cable
sizes. Used for unshielded cables
EGM - Supplied with different diameter
sleeves to suit varying cable
sizes. Used for shielded cables
SQ - Used for shielded cables
SB - Used for unshielded cables

Notice: All information, including illustrations given herein is believed to be accurate at the time of printing. In lieu of design
advances, Amphenol reserves the right to change specifications without notice. This publication AC6201 07/17 supersedes all
existing Amphenol literature on 62IN series connectors.

20
 NORTH AMERICA
Sales & Product Support

Amphenol PCD Amphenol Aerospace Operations Amphenol Canada Amphenol Fiber Systems International
72 Cherry Hill Drive 40-60, Delaware Avenue Meford Drive 1300 Central Expressway North
Beverly, MA 01915 USA Sidney, NY 13838-1395 Scarborough, Suite 100 Allen,Texas 75013, USA
Tel: +1-978-624-3400 Tel: +1-607-563-5011 ON MIB 2X6 Tel: +1-214-547-2400
Fax: +1-978-927-1513 Fax: +1-607-563-5357 Tel: +416-291-4401 Fax: +1-214-547-9344
info@amphenolpcd.com Fax: +416-292-0647
www.amphenolpcd.com
www.backshellworld.com
EUROPE
France United Kingdom Germany Italy Center & East Europe
Amphenol Socapex S.A.S. Amphenol Limited Amphenol-Air LB GmbH Via Barbaiana 5 Amphenol
948,Promenade de I'Arve Thanet Way, Whitstable Am Kleinbahnhof 4 20020 Lainate (Milano) Wiener Gasse 68
Bp29, Thyez Cedex Kent CT5 3JF, England Saarlouis Italy 2380 Perchtoldsdorf
74311, France Tel: +44-1227-773-200 D-66740, Germany Tel :+39-02-93254.209 Tel: +43-699-10396071
Tel: +33-4-5089-2800 Fax: 44-1227-276-571 Tel: 49-6831-9810-00 +39-02-93254.214 Fax: +43 699 40396071
Fax: +33-4-5096-1941 Fax: 49-6831-9810-30 Fax:+39-02-93254-444

Amphenol Air-LB Spain Austria Holland Sweden

Immeuble Le Doublon Amphenol Iberica Amphenol Austria Amphenol Benelux Amphenol
11, Avenue Dobonnet Wiener Gasse 68 Zadelmaker 121 Industrial and Military &
Edificio Burgosol Oficina
Aerospace
Courbevoice-Cedex N 55 C/Comunidad de 2380, Erchtoldsdarf, NL-2401 PD Alphen Nordic & Baltic
92407, France Madrid 35 bis - Austria aan den Rijn Holland Military Phone/
Ph: +33-1-4905-3000 Las Rozas (Madrid) Tel : + 43-69910396071 Tel:+31-172-444903 Mobile+46702129200
Fax: +33-1-4905-3043 Tel: +34-91-6407302 Fax: + 43-69940306071 Fax:+31-172 240254 Industrial +46 767909560
+34-91-6407306
Fax:+34-91-6407307

ASIA
India Japan Singapore China
Amphenol Japan Amphenol East Asia Ltd. Amphenol PCD Shenzhen
Amphenol Interconnect India Pvt. Ltd.
471-1, Deba, Ritto City 72 Bendemeer Road 3/F Building, A4 Songbai
105 Bhosari Industrial Area
Shiga 520-3041, Japan # 03-33 Luzerne Industrial Park
Pune-411026, India
Tel: +81-77-553-8501 Singapore 339 941 East Road of Minghuan
Tel: +9120-3068-8305
Fax: +81-77-551-2200 Tel: 65-6294-2128 Gongming Town, Baon District
Fax:+9120-2712-9158
Fax: 65-6294-3522 Shenchen, China
Tel: +86-755-8173-8000
Amphenol Interconnect India Pvt. Ltd. Korea
Amphenol Daeshin Electronics Fax: +86-755-8173-8180
61 Electronics City
Bangalore-560 100, India 558 SoSa, SongNae, Bucheon-City
Ph: +9180-2852-3838 Kyunggi-Do, Korea 420-130
Fax: +9180-2852-0418 Tel: +82-32-610-3800
Fax: +92-32-673-2507

ROW
Australia Africa Russia Argentina
Amphenol Australia Pty Ltd Amphenol South Africa Amphenol Russia Amphenol Argentina
2 Fiveways Boulevard 30 Impala Road 8-2 Yaroslavskaja Str Avenida Callao 930
Keysborough 2196 Sandton-Chistlehurston 129164 Moscow, Russia 2nd Floor, Office B Plaza
VIC 3173 South Africa Tel: +7-495-937-6341 C1023AAP Buenos Aires
Ph: +61-3-8796-8888 Tel: +27-11-783-9517 Fax: +7-495-937-6319 Argentina
Fax: +61-3-8796-8801 Fax: +27-11-783-9519 Tel: 54-11-4815-6886
Fax: 54-11-4814-5779
Israel Maslak Brazil
Bar-Tec Ltd. 34396 Istanbul Amphenol do Brasil Ltda
P.O. Box 279 Tel: +90-212-335-2501 Rua Diogo Moreira 132
Kfar Sava, 44102 Israel Fax: +90-212-335-2500 CEP 05423-010
Tel: +972-9-7644100 Sao Paulo-SP, Brazil
Fax: +972-9-7674324 Tel: +55-11-3815-1003
Fax: +55-11-3815-1629
Manufacturing Locations Marketing Locations

Corporate Office & Pune Factory Marketing Headquarters Southern Region

105, Bhosari Industrial Area, Tel.: 91 - 020 - 67360303,67360304 No. 1115, 22nd Main Road,
Pune - 411 026. Fax : 91 - 020 - 67360321 11th Cross sector - 1, HSR Layout
Tel.: 91 - 020 - 67360302 Email: vbhavsar@amphenol-in.com Bangalore - 560 102.
Fax : 91 - 020 - 67360321 sales@amphenol-in.com Tel.: 91 - 80 - 49530341, 49530345
rjohn@amphenol-in.com Fax : 91 - 80 - 49538697
Email : kmanoj@amphenol-in.com

Exports Western Region Central Region

Tel.: 91 - 20 - 67360305, 67360353 Tel. : 91- 20- 67360334 107, 1st Floor, ‘Am Sri Classic’,
Email : svpatil@amphenol-in.com Email : sunilp@amphenol-in.com Sarojinidevi Road, Secunderabad - 500 003.
Telefax : 91- 40-66332906
Email : pprasad@amphenol-in.com

Bangalore Factory Northen & Eastern Region

61 Keonics Electronic City A-421, Pacific Business Park
Hosur Road, Bangalore - 560 102 Plot No. 37/1, Sahibabad Indst. Area,
Tel.: 91 - 80 - 66790900/910/937 Site IV, Ghaziabad (UP) - 201 010.
Email : shrikantgramopadhye Mobile : 91-9910211399
@amphenol-in.com Email : sunily@amphenol-in.com

www.amphenol-in.com