07-582 Rev.

Lift Table Brochure 11/20/07 11:54 AM Page 2

07-582 Rev. Lift Table Brochure 11/20/07 11:54 AM Page 2

Southworth
The Lift Table Experts

Southworth was founded in 1890

and for the last 60 plus years has
been in the business of helping
companies handle materials faster,
safer and easier.

Today, Southworth is the world’s

leading supplier of vertical movement
and positioning equipment with the
broadest product lines, largest
inventory of stock models, most
Coil Handling
flexible range of modification, most
experienced custom designers and
the industry’s leading innovator.

In this catalogue, you will find

specification information for various
Dock Lifts
designs of scissor lifts and accessories.

Hydraulic and Pneumatic Lift Tables

Pallet Jack Accessible Lift Tables

Stainless Steel Lifts
Lite Capacity Lift Tables

Roll-Handling Lift Tables

Coil-Handling Lift Tables

Lift and Tilt
Dock Lifts

Manual /Power Driven Portable Lifts

Lifts with Turntables

Lift and Tilt Tables

Carousel Lifts
Lift Table with
2 ©2006 Southworth Products Corp
Flush Mount Turntable
07-582 Rev. Lift Table Brochure 11/20/07 11:55 AM Page 3

Quality Features
For Reliable Performance and Long Service Life

Contoured Comfort Edge Design

Legs No sharp corners
With extra width at the on table top. Bright
pivot point, Southworth’s safety yellow stripe
contoured legs combine for high visibility.
great strength with
lower collapsed height.

Lubricated-for-Life Heavy-Duty
Bushings Torque Tubes
All pivot points
Torque tubes
have hardened pins
minimize platform
that operate in
twisting and deflection
lubricated-for-life,
for high degree of
virtually maintenance-
rigidity and stability.
free bushings.

Heavy-Duty Tell-Tale Return

Hoses Hydraulic Fluid Line
All Southworth lifts Clear plastic return line
have heavy-duty hoses from cylinder rod bearing
with burst strength to tank gives visual
600% greater than indication of need to
the hydraulic repack cylinder and
operating pressure. prevents fluid spillage
in the event of a bypass.

Oversize, Low- Adjustable

Pressure Flow Control
Hydraulic Cylinders
Pressure compensated
Low operating pressure flow control valve
extends the life of with lock out. Preset
hydraulic components. and locked at 10 F.P.M.
Chrome-plated piston maximum lowering
rods are corrosion speed per ANSI Standard,
resistant, and cylinder MH29 where applicable.
walls are honed.

Built In Wear Indicating

Safety Chock Rollers and
Prevents accidental Roll Retainers
lowering of table Rollers are captured in
during maintenance. the base by means of
retainers to prevent
accidental separation
or misalignment.
Southworth Scissors Lifts are designed and All oversized width
manufactured to meet or exceed ANSI MH29.1 tabletops also include
Safety Requirements for Industrial Scissors Lifts. an upper set of retainers. 3
07-582 Rev. Lift Table Brochure 11/20/07 11:56 AM Page 4

®
Backsaver Lifts
and Backsaver Lite Lifts

®
LS Series Backsaver Lifts
Southworth Backsaver® Lifts are
extremely rugged and reliable
machines. Thousands of Backsaver
Lifts are in use throughout the United
States for machine feeding, work
positioning, assembly, order picking, Stainless Steel
pallet loading, and a wide range
Models
of other applications. They are
available in many basic sizes and Semi-Live
Portable
capacities to lift and position loads
up to 6,000 lbs and heights to 56".
The wide range of power options,
controls, tabletops, and base
configurations that can be specified
for each of the many basic sizes
gives the user an almost unlimited
choice of variations.

Backsaver Lift

Backsaver Lite Lifts

These industrial grade lift tables

are specifically designed for
those applications involving
Backsaver Lite
Powered Portable
lighter loads of up to 1,500 lbs.
They are available in four
standard configurations:
Stationary, Compact with
high lift and small footprint,
Portable with easy rolling
casters, and Powered Portable
with battery powered drive.

Backsaver
Lite
Backsaver Lite
Backsaver Lite Compact
4
Portable
 07-582 Rev. Lift Table Brochure 11/20/07 11:56 AM Page 5

Specifications
Approx.
Vertical Height Standard Maximum Elevating Shipping
Capacity Travel Min. Max. Platform Platform Time Standard Weight/Lbs.
Model No. (Lbs.) (Inches) (Inches) (Inches) (Inches) (Inches) (Seconds) HP Voltage (std. platform)

LL & LS Series Backsaver Lite Lifts

LL05.5-26 550 26 5 1⁄2 311⁄2 20 x 36 36 x 60 9 1
⁄2 115/1/60 240
Q LL1.1-26 1100 26 5 1⁄2 311⁄2 20 x 36 36 x 60 21 1
⁄2 115/1/60 255
LL1.5-35 1500 35 6 1⁄4 41 1⁄4 24 x 48 36 x 60 32 1
⁄2 115/1/60 450
U CLL05.5-26 550 26 9 35 24 x 40 30 x 48 7 1
⁄2 12 volt DC 315
I CLL1.1-26 1100 26 9 35 24 x 40 30 x 48 13 1
⁄2 12 volt DC 325
C LS05-30 500 30 6 36 12 x 24 12 x 24 20 1
⁄2 115/1/60 175
K LS05-30W 500 30 6 36 16 x 24 24 x 36 20 1
⁄2 115/1/60 200
LS1-30 1000 30 6 36 16 x 24 24 x 36 20 1
⁄2 115/1/60 225
S LS Series Backsaver Lifts
H LS2-24 2000 24 63⁄4 303⁄4 24 x 36 48 x 60 14 1 115/1/60 500
LS4-24 4000 24 63⁄4 303⁄4 24 x 36 48 x 60 28 1 115/1/60 550
I LS6-24 6000 24 73⁄4 313⁄4 24 x 36 48 x 60 44 1 115/1/60 600
P LS2-36 2000 36 63⁄4 423⁄4 24 x 48 48 x 72 21 1 115/1/60 600
LS4-36 4000 36 63⁄4 423⁄4 24 x 48 48 x 72 42 1 115/1/60 650
M LS6-36 6000 36 71⁄4 431⁄4 24 x 48 48 x 72 22 3.2 460/3/60 725
O LS2-48 2000 48 8 56 24 x 66 48 x 96 9 3.2 460/3/60 950
LS4-48 4000 48 8 56 24 x 66 48 x 96 18 3.2 460/3/60 1000
D LS6-48 6000 48 8 56 24 x 66 48 x 96 27 3.2 460/3/60 1050
E LS2-24W 2000 24 63⁄4 303⁄4 36 x 36 60 x 60 14 1 115/1/60 575
L LS4-24W 4000 24 63⁄4 303⁄4 36 x 36 60 x 60 28 1 115/1/60 625
S LS6-24W 6000 24 73⁄4 313⁄4 36 x 36 60 x 60 44 1 115/1/60 675
LS2-36W 2000 36 63⁄4 423⁄4 36 x 48 60 x 72 21 1 115/1/60 700
LS4-36W 4000 36 63⁄4 423⁄4 36 x 48 60 x 72 42 1 115/1/60 750
LS6-36W 6000 36 71⁄4 433⁄4 36 x 48 60 x 72 22 3.2 460/3/60 825
LS2-48W 2000 48 8 56 48 x 66 72 x 96 9 3.2 460/3/60 1150
LS4-48W 4000 48 8 56 48 x 66 72 x 96 18 3.2 460/3/60 1200
LS6-48W 6000 48 8 56 48 x 66 72 x 96 27 3.2 460/3/60 1250
LS Series Plus Lifts
LS8-36 8000 36 9 45 30 x 60 54 x 84 21 3.2 460/3/60 1350
LS10-36 10000 36 10 46 30 x 60 54 x 84 28 3.2 460/3/60 1400
er Lift LS12-36 12000 36 10 46 30 x 60 54 x 84 28 3.2 460/3/60 1500
LS3-42 3000 42 63⁄4 483⁄4 24 x 56 48 x 84 49 1 460/3/60 725
LS5-42 5000 42 7 49 24 x 56 48 x 84 74 1 460/3/60 775
LS8-48 8000 48 9 57 24 x 66 48 x 96 30 3.2 460/3/60 1600
LS2-60 2000 60 10 70 24 x 86 48 x 120 10 3.2 460/3/60 1300
LS4-60 4000 60 10 70 24 x 86 48 x 120 20 3.2 460/3/60 1375
LS5-60 5000 60 8 68 24 x 86 48 x 120 29 3.2 460/3/60 1450
LS6-60 6000 60 10 70 24 x 86 48 x 120 30 3.2 460/3/60 1450
LS8-60 8000 60 10 70 24 x 86 48 x 120 42 3.2 460/3/60 1700
LS2-72 2000 72 10 82 30 x 102 60 x 132 19 3.2 460/3/60 2000
LS4-72 4000 72 10 82 30 x 102 60 x 132 38 3.2 460/3/60 2100
LS6-72 6000 72 12 84 30 x 102 60 x 132 41 3.2 460/3/60 2200
LS2-84 2000 84 10 94 30 x 120 60 x 156 26 3.2 460/3/60 2200
LS4-84 4000 84 10 94 30 x 120 60 x 156 52 3.2 460/3/60 2300
LS6-84 6000 84 14 98 30 x 120 60 x 156 56 3.2 460/3/60 2500
LS Series Wide Base Lifts
LS8-36W 8000 36 9 45 42 x 60 66 x 84 21 3.2 460/3/60 1500
LS10-36W 10000 36 10 46 42 x 60 66 x 84 28 3.2 460/3/60 1600
LS12-36W 12000 36 10 46 42 x 60 66 x 84 28 3.2 460/3/60 1700
LS3-42W 3000 42 63⁄4 483⁄4 42 x 56 66 x 84 49 1 460/3/60 875
LS5-42W 5000 42 7 49 42 x 56 66 x 84 74 1 460/3/60 925
LS8-48W 8000 48 9 57 48 x 66 72 x 96 30 3.2 460/3/60 1800
LS2-60W 2000 60 10 70 54 x 86 84 x 120 20 3.2 460/3/60 1650
LS4-60W 4000 60 10 70 54 x 86 84 x 120 20 3.2 460/3/60 1725
LS5-60W 5000 60 8 68 54 x 86 84 x 120 29 3.2 460/3/60 1800
LS6-60W 6000 60 10 70 54 x 86 84 x 120 30 3.2 460/3/60 1800
LS8-60W 8000 60 10 70 54 x 86 84 x 120 42 3.2 460/3/60 2150
LS2-72W 2000 72 10 82 60 x 102 96 x 132 24 3.2 460/3/60 2450
LS4-72W 4000 72 10 82 60 x 102 96 x 132 38 3.2 460/3/60 2550
LS6-72W 6000 72 12 84 60 x 102 96 x 132 41 3.2 460/3/60 2700
LS2-84W 2000 84 10 94 60 x 120 96 x 156 35 3.2 460/3/60 2750
LS4-84W 4000 84 10 94 60 x 120 96 x 156 52 3.2 460/3/60 2850
LS6-84W 6000 84 14 98 60 x 120 96 x 156 56 3.2 460/3/60 3100 5
Lifts with 3.2 HP three-phase power units available with 1 HP single-phase power units. Rise time increases by a multiplier of 3.3.
07-582 Rev. Lift Table Brochure 11/20/07 11:57 AM Page 6

Heavy-Duty DL Series Lifts, L Series Cam Lifts

andTandem Lifts (Long and Wide Base)

DL Series Lifts
These heavy - duty lifts are ideal
for cargo handling and lifting
heavy industrial loads. Built-in
hydraulic overload relief protects
personnel and structures. Heavy -
plate platforms with structural
reinforcement minimize deflection Heavy-Duty
while the wide base provides
DL Series Lifts
increased rigidity and stability.

L Series Cam Lifts

Exclusive CAM design
provides maximum capacities
(up to 30,000 lbs.) with L Series Cam Lifts
minimum height clearances.

Tandem Lifts
LST Tandem lifts provide level rise
for long loads such as lumber,
pipes, sheets, bar stock, and
assemblies. These lifts are
typically used as feeding tables
for tube welders, formers, and
panel saws as well as for bundling
and banding bar stock, lumber,
and other materials.

Tandem design allows the

combination of high capacity
and low collapsed height to
Tandem Lifts
support loads up to 7' x 17'.
They are available in extra long
and extra wide configurations.

6
07-582 Rev. Lift Table Brochure 11/20/07 11:57 AM Page 7

Specifications
DL Series Heavy-Duty Lifts
Approx.
Vertical Height Standard Maximum Elevating Shipping
Capacity Travel Min. Max. Platform Platform Top Plate Time Standard Weight/Lbs.
Model No. (Lbs.) (Inches) (Inches) (Inches) (Inches) (Inches*) Thickness (Seconds) HP Voltage (std. platform)

DL20-36 20000 36 16 52 60 x 76 96 x 108 1

⁄2 56 3.2 460/3/60 4000
DL10-48 10000 48 131⁄4 611⁄4 47 x 76 84 x 108 3
⁄8 56 3.2 460/3/60 3300
DL15-48 15000 48 141⁄4 621⁄4 60 x 76 96 x 108 1
⁄2 62 3.2 460/3/60 4000
DL25-48 25000 48 16 64 60 x 76 96 x 108 1
⁄2 85 3.2 460/3/60 4800
DL10-60 10000 60 16 76 60 x 102 96 x 144 3
⁄8 48 3.2 460/3/60 4800
DL12-60 12000 60 16 76 60 x 102 96 x 144 3
⁄8 52 3.2 460/3/60 5100
DL16-60 16000 60 16 76 60 x 102 96 x 144 1
⁄2 72 3.2 460/3/60 5300
DL20-60 20000 60 22 82 60 x 120 96 x 144 1
⁄2 86 3.2 460/3/60 6800
DL25-60 25000 60 26 86 72 x 144 108 x 180 1
⁄2 105 3.2 460/3/60 10500
DL20-72 20000 72 22 94 72 x 144 108 x 180 1
⁄2 112 3.2 460/3/60 9700
DL4-84 4000 84 12 96 60 x 120 96 x 156 3
⁄8 45 3.2 460/3/60 4200
DL6-84 6000 84 16 100 60 x 120 96 x 156 3
⁄8 48 3.2 460/3/60 5000
DL10-84 10000 84 16 100 60 x 120 96 x 156 3
⁄8 88 3.2 460/3/60 5800
*Maximum platforms are for reasonably uniform loads.

L Series CAM Lifts

Approx.
Vertical Height Standard Maximum Frame Elevating Shipping
Capacity Travel Min. Max. Platform Platform Size Time Standard Weight/Lbs.
Model No. (Lbs.) (Inches) (Inches) (Inches) (Inches) (Inches) (Inches) (Seconds) HP Voltage (std. platform)

L8-36 8000 36 7 ⁄8
5
43 ⁄85
30 x 60 48 x 78 28 ⁄4 x 60
3
21 3.2 460/3/60 1360
L10-36 10000 36 9 45 32 x 60 54 x 78 303⁄4 x 60 31 3.2 460/3/60 1800
L15-36 15000 36 91⁄2 451⁄2 36 x 72 60 x 90 341⁄2 x 701⁄2 50 3.2 460/3/60 2900
L20-36 20000 36 101⁄8 461⁄8 36 x 72 60 x 90 341⁄2 x 701⁄2 50 3.2 460/3/60 3300
L30-36 30000 36 111⁄4 471⁄4 43 x 72 72 x 96 41 x 701⁄2 56 5.0 460/3/60 4400

LST Series Tandem Lifts

Approx.
Vertical Height Standard Maximum Elevating Shipping
Capacity Travel Min. Max. Platform Platform Time Standard Weight/Lbs.
Model No. (Lbs.) (Inches) (Inches) (Inches) (Inches) (Inches) (Seconds) HP Voltage (std. platform)

LST 4-36 4000 36 6 ⁄4

3
42 ⁄4
3
24 x 96 48 x 120 42 1 115/1/60 1150
LST 8-36 8000 36 63⁄4 423⁄4 24 x 96 48 x 120 84 1 115/1/60 1250
LST 12-36 12000 36 71⁄4 431⁄4 24 x 96 48 x 120 44 3.2 460/3/60 1400
LST 4-48 4000 48 8 56 24 x 132 48 x 168 18 3.2 460/3/60 1850
LST 8-48 8000 48 8 56 24 x 132 48 x 168 36 3.2 460/3/60 1950
LST 12-48 12000 48 8 56 24 x 132 48 x 168 54 3.2 460/3/60 2050
LST 4-60 4000 60 10 70 24 x 172 48 x 204 20 3.2 460/3/60 2550
LST 8-60 8000 60 10 70 24 x 172 48 x 204 40 3.2 460/3/60 2700
LST 10-60 10000 60 8 68 24 x 172 48 x 204 58 3.2 460/3/60 2850
LST 12-60 12000 60 10 70 24 x 172 48 x 204 60 3.2 460/3/60 2850

LST Series Wide Base Lifts

Approx.
Vertical Height Standard Maximum Elevating Shipping
Capacity Travel Min. Max. Platform Platform Time Standard Weight/Lbs.
Model No. (Lbs.) (Inches) (Inches) (Inches) (Inches) (Inches) (Seconds) HP Voltage (std. platform)

LST 4-36W 4000 36 6 ⁄4

3
42 ⁄4 3
36 x 96 60 x 120 42 1.0 115/1/60 1350
LST 8-36W 8000 36 63⁄4 423⁄4 36 x 96 60 x 120 84 1.0 115/1/60 1450
LST 12-36W 12000 36 71⁄4 431⁄4 36 x 96 60 x 120 44 3.2 460/3/60 1600
LST 4-48W 4000 48 8 56 48 x 132 72 x 168 18 3.2 460/3/60 2250
LST 8-48W 8000 48 8 56 48 x 132 72 x 168 36 3.2 460/3/60 2350
LST 12-48W 12000 48 8 56 48 x 132 72 x 168 54 3.2 460/3/60 2450
LST 4-60W 4000 60 10 70 54 x 172 84 x 204 40 3.2 460/3/60 3250
LST 8-60W 8000 60 10 70 54 x 172 84 x 204 40 3.2 460/3/60 3400
LST 10-60W 10000 60 8 68 54 x 172 84 x 204 58 3.2 460/3/60 3550
LST 12-60W 12000 60 10 70 54 x 172 84 x 204 60 3.2 460/3/60 3550
Lifts with 3.2 HP three-phase power units available with 1 HP single-phase power units. Rise time increases by a multiplier of 3.3. The listings above represent
Southworth’s most popular tandem lift arrangements, however, practically any lift models can be tandemized end to end or side by side - Consult Factory. 7
07-582 Rev. Lift Table Brochure 11/20/07 11:57 AM Page 8

®
Spacesaver High Rise Lifts
andSpecialty Lift Tables

Spacesaver® Lifts
LSH Spacesaver® lifts can be
used as personnel work platforms,
as cargo lifts, between levels as
mezzanine lifts, and for positioning
test apparatus or tools. These lifts
are available with vertical travel
up to 12 feet. Capacities range
from 1,000 to 12,000 pounds.

Spacesaver
Lifts
Floor Height Lifts
These lift tables lower to floor
height or near floor height so
Personnel
that they can be fed and Lifts
offloaded by hand pallet trucks.
Standard capacities range from
500 to 6,000 pounds.

Floor Height
Pneumatic Lifts Lifts
For use anywhere that shop air is
available. Capacities up to 4,000
pounds. No hydraulic fluid means
no risk of contaminants in the
production process.
Pneumatic Lifts

Lifts for Palletizing

Southworth manufactures a wide
variety of Lift Tables for use in
LiftMat Series
palletizing applications. See our
Pallet Handling Brochure for a
complete selection.

8
07-582 Rev. Lift Table Brochure 11/20/07 11:57 AM Page 9

Specifications

LSH Series Spacesaver High Rise Lifts

Approx.
Vertical Height Standard Maximum Elevating Shipping
Capacity Travel Min. Max. Platform Platform Time Standard Weight/Lbs.
Model No. (Lbs.) (Inches) (Inches) (Inches) (Inches) (Inches) (Seconds) HP Voltage (std. platform)

LSH 1-36 1500 36 10 46 24 x 32 36 x 48 16 1.0 115/1/60 600

LSH 1-48 1000 48 91⁄2 571⁄2 24 x 40 36 x 54 21 1.0 115/1/60 750
LSH 2-48 2000 48 91⁄2 571⁄2 24 x 40 36 x 54 42 1.0 115/1/60 800
LSH 4-48 4000 48 12 60 30 x 42 48 x 60 16 3.2 460/3/60 1250
LSH 6-48 6000 48 14 62 32 x 42** 48 x 60 35 3.2 460/3/60 1300
LSH 1-60 1000 60 101⁄2 701⁄2 24 x 48 36 x 60 27 11⁄2 115/1/60 750
LSH 2-64 2500 64 121⁄2 761⁄2 24 x 53 42 x 66 16 3.2 460/3/60 1100
LSH 5-60 5000 60 14 74 30 x 53 48 x 66 30 3.2 460/3/60 1800
LSH 8-60 8000 60 14 74 30 x 54 48 x 66 43 3.2 460/3/60 1900
LSH 12-60 12000 60 18 78 36 x 67 60 x 84 95 3.2 460/3/60 3200
LSH 1-72 1500 72 121⁄2 841⁄2 20 x 53 36 x 66 58 11⁄2 115/1/60 900
LSH 2-72 2000 72 121⁄2 841⁄2 20 x 53 36 x 66 75 11⁄2 115/1/60 950
LSH 5-72 5000 72 14 86 32 x 57** 54 x 72 36 3.2 460/3/60 2000
LSH 2-84 2000 84 17 101 33 x 69 60 x 90 29 3.2 460/3/60 1900
LSH 4-84 4000 84 17 101 33 x 69 60 x 90 34 3.2 460/3/60 2200
LSH 6-84 6000 84 17 101 33 x 69 60 x 90 62 3.2 460/3/60 2350
LSH 1-96†* 1000 96 171⁄4 1131⁄4 24 x 53 42 x 66 17 3.2 460/3/60 1600
LSH 3-96 3000 96 17 113 36 x 77 60 x 108 50 3.2 460/3/60 3000
LSH 5-96 5000 96 17 113 36 x 77 60 x 108 64 3.2 460/3/60 3500
LSH 10-96 10000 96 20 116 36 x 77 60 x 108 102 3.2 460/3/60 4500
LSH 2-114 2000 114 17 131 33 x 88 60 x 108 36 3.2 460/3/60 3400
LSH 5-120* 5000 120 24 144 44 x 69*** 72 x 96 102 3.2 460/3/60 4800
LSH 3-128 3000 128 21 149 42 x 96 72 x 120 48 3.2 460/3/60 3400
LSH 6-128 6000 128 21 149 42 x 96 72 x 120 80 3.2 460/3/60 3500
LSH 2-144* 2000 144 24 168 42 x 77 72 x 108 68 3.2 460/3/60 4350
LSH 4-144* 4000 144 24 168 42 x 77 72 x 108 136 3.2 460/3/60 4500
LSH 5-144 5000 144 21 165 42 x 108 72 x 144 125 3.2 460/3/60 4000
† 11⁄4" Lateral motion *Three sets of legs–All others have two ** Base frame width 30 ***Base frame width 42

ZLS Series Floor Height Lift Tables

Approx.
Vertical Standard Elevating Shipping
Capacity Travel Overall Inside Platform Side Deck Platform Time Standard Weight/Lbs.
Model No. (Lbs.) (Inches) Width Width Length Height Thickness (Inches) (Seconds) HP Voltage (std. platform)

ZLS2-35 2000 35" 49 - 671⁄4" 32-50" 48" 73⁄4" 3

⁄8" 50 x 48" 45 1 115/1/60 1425
ZLS4-35 4000 35" 49 - 671⁄4" 32-50" 48" 73⁄4" 3
⁄8" 50 x 48" 48 1 115/1/60 1440
ZLS6-34 6000 34" 53 - 711⁄4" 32-50" 48" 85⁄8" 1
⁄2" 50 x 48" 63 1 115/1/60 1865

LiftMat Series
Approx.
Vertical Low Raised Standard Maximum Elevating Shipping
Capacity Travel Height Height Platform Platform Time Standard Weight/Lbs.
Model No. (Lbs.) (Inches) (Inches) (Inches) (Inches) (Inches) (Seconds) HP Voltage (std. platform)

LM-05 500 32" 3" 35" 24 x 66" 48 x 96" 15 1 115/1/60 540

LM1 1000 32" 3" 35" 24 x 66" 48 x 96" 15 1 115/1/60 560
LM2 2000 311⁄2" 31⁄2" 35" 24 x 66" 48 x 96" 20 1 115/1/60 600

Pneumatic Lifts
Approx.
Vertical Low Raised Standard Maximum Elevating Air Shipping
Capacity Travel Height Height Platform Platform Time (PSI) Weight/Lbs.
Model No. (Lbs.) (Inches) (Inches) (Inches) (Inches) (Inches) (Seconds) Free Air (std. platform)

LSA2-24 2000 24 7 ⁄2"

1
31 ⁄2"
1
26" x 48" 48" x 72" 15 (empty) 80 psi/15 cfm 650
LSA4-24 4000 24 8" 31 1⁄2" 42" x 48" 66" x 72" 15 (empty) 80 psi/15 cfm 800

9
07-582 Rev. Lift Table Brochure 11/20/07 11:58 AM Page 10

Lift Tables Options

andAccessories
Popular Lift Table
Options and Accessories
When you purchase a Southworth
Lift Table, you get exactly what you
want, without any compromise.
Southworth’s standard line of lift
tables offer well over one million
different configurations that meet
the vast majority of application
needs. In addition, the wide range
of options and accessories shown
in this brochure allow you to specify
tables that precisely meet your lifting
and positioning needs.
Your Southworth distributor will
be happy to assist you in selecting
options and accessories to meet
your specific application.

One Touch /Auto Level Popular Lift Table Options for:

Raise or lower the lift a preset increment at
the touch of a button. User Programmable.
Control
Safety
Convenience
Toe Sensing Edge Portability
Sensor automatically reverses lowering
motion on contact. Machine Protection

Flush Mount Turntables

are only 3⁄16" higher than the surrounding
platform. Turntable is rotationally locked
when the lift is in the full down position.

Wheels and Casters

for a variety of portability requirements
including powered and semi-live portable
to suit any environment.

Bellows Skirting
cover mechanism between platform and
base. Protects vital lift or tilter components
from damage caused by debris.

10
07-582 Rev. Lift Table Brochure 11/20/07 11:58 AM Page 11

Hydraulic / Actuation Options

Larger Power Units* Manual Hand or Foot Pump Actuation Minimum Downdrift Valving* Continuous Duty Power Units*
Higher horsepower motors and hydraulics Lever type hand pump or foot pedal pump Near positive shut-off valving for use where Specially designed power units with motors
used to increase travel speed. for use when manual actuation or precise platform must maintain position for extended capable of many motor starts per hour.
positioning is required. periods of time.

Air Motor Driven Power Units Cross Check Valving* Continuous Running Power Units* Screw Jack*
For use where electrical actuation is Locks oil in cylinders to eliminate deflection Heavy-duty power units with special cooling Lift is actuated by gear motor driven worm
undesirable and shop air is available; caused by oil transfer. Used in certain side features. Power unit runs continuously, and or ball screw. For more precise, repetitive
meets explosion proof requirements. loading applications. valves are actuated to activate lift. Used for positioning or where hydraulics are not desired.
extremely high jogs or cycles.
DC Power Units Power Units Full JIC Style Double Acting Cylinders* Hot and Cold Temperature Hydraulic Packaging
Direct current power units for use Continuous Running Power Units* For special applications where it is necessary Special sealing and hydraulic fluids for use
with battery power. Continuous running power unit built to provide both power up and power down. in hot or cold atmospheres.
to JIC specifications.

External Power Unit* No Coast Valving* Air Bag Actuation Velocity Fuse(s)/Excess Flow Protectors
Power unit is connected to lift Fast acting hydraulic valving, which Inflatable air bag provides limited travel lift Hydraulic control prevents table free fall in the
only by hydraulic hoses. decreases upward coast, for use where actuation. Used where electrical power is
not desirable or where only two positions unlikely event of massive hydraulic failure.
more precise positioning is desired. are required.

Electronic Control Options

Wall Mounted Push Button Maintained Contact Controls Special NEMA Rated Electrical Packages* Travel Limit Switch(es)
Permanent wall mounted controls for use Up/down/emergency stop push button control A variety of electrical packages designed to Electrical switch stops travel, prevents overtravel,
where a fixed operating station is desirable. which stops travel automatically at preset level. meet NEMA standards for outdoor, explosion provides height positioning, and can activate
(Control button does not have to be held.) proof, and other installation requirements. associated equipment. Should be used with
mechanical stop for fixed lowered height.

Automatic Leveling Package Electrical Quick Disconnect Visual or Audible Signals One-Touch Auto Leveling
Optical sensing control positions table Quick disconnect plugs for use with portable Lights or bells used to warn Increase productivity in repositioning applications.
and stops travel at any preset height. or frequently relocated lifts. personnel when lift is in operation. Raise or lower lifts a specific increment at the
touch of a button

Mechanical Options Portability and Transport Options

Narrow Base Lifting Eyes Semi-Live Portable Flanged Wheels
Reduced width base to fit special needs. Steel eye bolts allow table to be lifted with Consists of wheels at one end of base and Steel wheels with flange for use with
Must be lagged for stability. hoist. Frequently used in pit mounted applica- pull plate at the other, plus wheeled jack flat or rail track to provide unidirectional
tions for ease of installation and maintenance. handle. Used only for moving table to a new horizontal movement.
position, and not for transporting materials.
Wide Base Lag Plates Casters
Increased width base provides extra stability Permanently attached plates or angles with Powered Traverse A variety of casters, mounting arrangements,
for wider loads. bolt holes for lagging tables to floor. Hydraulic motor drives two wheels on a and floor locks is available for use where full
single shaft via a chain and sprocket. portability and maneuverability are desired.

Sub Bases Increased Roll Over Capacity Vee Groove Wheels Push Bar
Extra base unit increases low height of standard Structural strengthening of table support for Steel wheels with groove for use with
use in pit installations where loaded trucks or Hand height bar to facilitate manual movement
designs. Provides a positive stop at predetermined inverted angle or Vee track to provide of wheeled or castered portable units.
down level. Frequently used for integration transporters must traverse the platform in its
lowered position. unidirectional horizontal movement.
with automated systems.

Platform Options
Manual or Powered Turntables Vee Cradle Platform End-Shifting Platform Gravity or Powered Conveyor Tops
Bearing mounted and supported turntables Vee shaped platform provides centering Manual or powered platform end-shift used Roller conveyor tops for integration with
for rotating or positioning loads of work. and secure handling of cylindrical loads, to align loads with other handling systems other handling equipment or systems.
such as rolls. or operating equipment.

Tilting Tops Fork Pockets Ball Transfer Top Throw-Over Plates

30˚, 45˚, and 90˚ tilting platforms for better Structural fork pockets allow entire unit to Fixed or retractable ball conveyors for Hinged plates used to provide a bridge
positioning of certain loads. be lifted and moved by fork truck. omnidirectional movement of load on platform. between the platform surface and an
adjacent fixed height surface.

Access Plate Stainless Steel Platform Fixed and Removable Bellows AccordionSkirting
Removable or hinged plate in platform Corrosion and damage resistant surface Handrails with Snap Chain Single-ply stitched polyester skirting covers
For use in applications involving personnel mechanism between platform and base. Also
surface allows access to power unit and for use with corrosive materials or where lifting. Removable rails allow access from
hydraulics when lift is in lowered position. frequent wash down is required. available as boots to cover cylinders only.
any side when lift is not in use. (See photo on page 10)
Anti-skid Platform Surfaces Wheel Chock
Counter-weighted wheel chock recessed in Bevel Toeguard Toe Sensing Edge
Diamond tread platform surface or abrasive type 30˚ bevel on platform sides provides warning Automatically reverses lift on contact with
paint provide better traction for powered vehicles table top. Automatically engages as lift
raises and prevents wheeled vehicle from contact without abrupt shear point when lift any obstruction.
and reduce danger of personnel slipping. table is installed in pit.
rolling in set direction.

Environmental Options MACHINE PERFORMANCE OPTIONS

Export Boxing Special Paint Cam Follower Rollers* High Duty Cycle and Greased Manifolds*
Meets special packaging and Customer specified paint formulations and Low friction leg rollers for increased Special bearing packages and regreasable
shipping requirements for export colors. Corrosion Protection similar to that efficiency and longer operating life. pivot points for moderately high and high
out of the United States. of Hot Dip Galvanizing. duty cycle applications.
11
* Because of the high performance of standard tables, most asterisked options may not be required in normal usage.
To avoid unnecessary cost, please consult factory before specifying these options.
07-582 Rev. Lift Table Brochure 11/20/07 11:53 AM Page 1

More Products to Increase

Worker Productivity and
Reduce the Risk of Injury
Fatigue and repetitive stress disorders are
responsible for billions of dollars in lost
productivity annually. Every product
Southworth makes is designed to increase
worker productivity, while reducing their
susceptibility to injury. For virtually
every materials handling application,
Southworth can offer a solution to
make it faster, easier or safer.

Local Distributors to Provide

Application Assistance and After
Sale Support and Service
Take your Southworth distributor on a
walk through your plant. These specialists
can identify trouble spots and in many
cases help you to correct workplace
problems that are robbing you of
productivity and exposing your workers
to unnecessary risks.

Modern Facilities to
Ensure Quality, Choice
and On Time Delivery
Southworth utilizes the most modern
engineering and manufacturing
technology. With computerized
design, leading edge process control
and scheduling, and modern facilities,
Southworth is capable of supplying the
most choices in the fastest time.

All the Information You Need at the

Click of a Mouse
In order to provide customers with the
information they need when they need it,
Southworth has established the most
complete and comprehensive website in
the industry. Users can view product
specifications or get help picking the right
product for their application by using the
state-of-the-art application selector guide.

The Industry’s Largest Engineering

Department
Our engineering department can custom
design a lift specifically for your needs.
Southworth supplies many other products
to increase worker productivity and safety.
Information is available in different brochures
or at www.SouthworthProducts.com.

Southworth Products Corp

P.O. Box 1380, Portland, ME 04104-1380
TEL: (800) 743-1000 FAX: (207) 797-4734
www.SouthworthProducts.com
email: salesinfo@SouthworthProducts.com

LTB Oct 2007 Printed in U.S.A.