Mitutoyo General Catalog
Test indicator Move to other products
1 2 3 4 5 6 7 8
List of products
Dial Test Indicators SERIES 513 Dial Test Indicators SERIES 513 Dial Test Indicator SERIES 513 Universal Type
SPC Caliper Depth gage Height gage Micrometer Inside micrometer Micrometer head Indicator Test indicator
Accessories
for Dial Test Indicators
Pocket Type Dial Test Indicators SERIES 513
Accessories
for Pocket Type Dial Test Indicators
10 Gage head 11 Gauge Block 12 Reference gage 13 Surface plate 14 Miscellaneous 15 Linear scale 16 Digimatic scale unit 17 Profile projector 18 Microscope 19 Contracer 20 Surftest 21 Formtracer 22 Roundtest 23 Hardness tester 24 CMM 25 Flexible measuring
gage
26 Vision measuring
system
27 Detailed shape
measuring system
28 Laser scan micrometer 29 DIY tools
Dial Test Indicators
SERIES 513 Horizontal Type
513-404E
513-464E
513-424E 513-414E 513-466E
513-404E 513-464E
513-415E
DIAL TEST INDICATORS
513-426E 513-414E
513-405E 513-465E
513-425E
513-401E
513-409
513-401E
513-405E
Dimensions
25 17
Unit: mm
Performs easy and accurate measurement of narrow or recessed areas, plus inside and outside diameters that dial indicators cannot access. No-clutch structure for automatic reversal of measuring direction. Resistant to water and dust thanks to the one-piece bezel and "crystal" design with O-ring. The glare-free flat crystal face has a scratch-resistant coating. High-sensitivity and quick-response because of jeweled bearings. A carbide contact point is provided as standard.
15.5
FEATURES
D
Order No. 513-424E 513-414E 513-466E 513-404E 513-464E 513-415E 513-426E 513-405E 513-465E 513-425E 513-401E 513-409
D 39 39 28 39 28 39 39 39 28 39 39 39
L 22.3 36.8 22.3 20.9 20.9 44.5 22.3 14.7 14.7 14.7 12.8 14.7
High Precision Type Compact Type
Doubled Scale Spacing Dustproof
Long Contact Point Jeweled Anti-Magnetic
Revolution Counter Water resistance
236
37
SPECIFICATIONS
Metric Graduation 0.01mm Range 0.5mm Order No. Basic unit 513-424E 513-414E 513-466E 513-404E 513-464E 513-415E 513-426E 513-405E 513-465E 513-425E 513-401E Order No. Basic set 513-424A 513-414A 513-404A 513-415A 513-426A 513-405A 513-425A Order No. Full set 513-424T 513-414T 513-404T 513-415T 513-405T Dial reading 0-25-0 0-25-0 0-25-0 0-40-0 0-40-0 0-50-0 0-25-0 0-100-0 0-100-0 0-100-0 0-70-0 Accuracy 5m 10m 5m 8m 8m 10m 8m 3m 3m 6m 3m Measuring force 0.3N or less 0.2N or less 0.3N or less 0.3N or less 0.3N or less 0.2N or less 0.4N or less 0.3N or less 0.3N or less 0.4N or less 0.3N or less Remarks
0.8mm 1mm 1.5mm 0.2mm 0.6mm 0.14mm
0.002mm
0.001mm Inch Graduation .0005"
Range .03"
.0001"
.008"
Order No. Basic unit 513-402 513-412 513-462 513-403 513-463
Order No. Full set 513-402T 513-412T 513-403T
Dial reading 0-15-0 0-15-0 0-15-0 0-4-0 0-4-0
Accuracy .0005" .0005" .0005" .0001" .0001"
Measuring force 0.3N or less 0.2N or less 0.3N or less 0.3N or less 0.3N or less
Remarks
Metric/Inch Graduation 0.002mm/.0001" Inch/Metric Graduation .0005"/0.01mm Range .03"/0.7mm Order No. Basic unit 513-406 Order No. Full set 513-406T Dial reading 0-15-0/0-35-0 Accuracy .0005" Measuring force 0.3N or less Remarks Range 0.2mm/.0075" Order No. Basic unit 513-409 Order No. Basic set Order No. Full set 513-409T Dial reading 0-10-0/0-38-0 Accuracy 3m Measuring force 0.3N or less Remarks
Set Configurations
Metric (Metric/Inch) Full Set Basic Set Basic Unit
Swivel clamp (900321, for 4mm, 8mm, dovetail)
Inch (Inch/Metric) Full Set
Basic Unit
Contact Contact point, point, .039" DIA. .118" DIA. Contact point, .079" DIA. (Carbide) Indicator Stem, .157" DIA. Swivel clamp (900322, for .157" DIA., 3/8" DIA., dovetail)
Contact point, 2mm (Carbide) Indicator
Contact point, 1mm Contact point, 3mm
Knurled clamp ring
Stem, 8mm
Stem, 4mm
Metric holding bar (L:100mm)
Knurled clamp ring
Stem, 3/8" DIA.
Inch holding bar (L: 4")
High Precision Type Compact Type
Doubled Scale Spacing Dustproof
Long Contact Point Jeweled Anti-Magnetic
Revolution Counter Water resistance
237
DIAL TEST INDICATORS
Dial Test Indicators
SERIES 513 Horizontal (20 Tilted Face), Vertical, and Parallel Types
Dimensions
Horizontal (20 Tilted Face) Type
L 59 Unit: mm
513-444E
513-445E
DIAL TEST INDICATORS
7.5
39
20
60.8
Order No. 513-444E 513-445E
L 20.9 14.7
513-455E Vertical Type
39 Unit: mm
51.5
513-284E
L
55.5
513-454E
6.6
14
21.7
FEATURES
Specially designed for easy viewing of measurements.
Parallel Type
Order No. 513-454E 513-455E
L a 20.9 72 14.7 66
Unit: mm
21
53.5 38
78.5
17
18
513-284E
High Precision Type Compact Type
Doubled Scale Spacing Dustproof
Long Contact Point Jeweled Anti-Magnetic
Revolution Counter Water resistance
238
513-444E
513-445E
513-454E 513-284FE
513-455E
SPECIFICATIONS
Metric Graduation 0.01mm 0.002mm Horizontal (20 Tilted Face) Type Dial Test Indicators Range 1.6mm 0.4mm Order No. Basic unit 513-444E 513-445E Order No. Basic set 513-444A 513-445A Order No. Full set 513-444T 513-445T Dial reading 0-40-0 0-100-0 Accuracy 10m 3m Measuring force 0.3N or less 0.3N or less Remarks
Inch Graduation .0005"
Horizontal (20 Tilted Face) Type Dial Test Indicators Range .06" Order No. Basic unit 513-442 513-442-01 513-442-06 513-446 513-446-06 513-443 513-443-06 Order No. Full set 513-442T 513-442T-01 513-442T-06 513-446T 513-446T-06 513-443T 513-443T-06 Dial reading 0-15-0 0-15-0 0-15-0 0-15-0 0-15-0 0-4-0 0-4-0 Accuracy .0005" .0005" .0005" .0005" .0005" .0002" .0002" Measuring force 0.3N or less 0.3N or less 0.3N or less 0.2N or less 0.2N or less 0.3N or less 0.3N or less Remarks
DIAL TEST INDICATORS
(Blue) (Black) (Black) Black)
.0001"
.016"
Note: See page 221 for set configurations.
Metric Graduation 0.01mm 0.002mm
Vertical Type Dial Test Indicators Range 0.8mm 0.2mm Order No. Basic unit 513-454E 513-455E Order No. Basic set 513-454A 513-455A Order No. Full set 513-454T 513-455T Dial reading 0-40-0 0-100-0 Accuracy 8m 3m Measuring force 0.3N or less 0.3N or less Remarks
Inch Graduation .0005" .0001"
Vertical Type Dial Test Indicators Range .03" .008" Order No. Basic unit 513-452 513-453 Order No. Full set 513-452T 513-453T Dial reading 0-15-0 0-4-0 Accuracy .0005" .0001" Measuring force 0.3N or less 0.3N or less Remarks
Note: See page 221 for set configurations.
Metric Graduation 0.01mm
Parallel Type Dial Test Indicator Range 0.8mm Order No. Basic unit 513-284FE Order No. Basic set 513-284FA Order No. Full set 513-984F Dial reading 0-40-0 Accuracy 8m Measuring force 0.3N or less Remarks
Inch Graduation .0005"
Parallel Type Dial Test Indicator Range .03" Order No. Basic unit 513-282F Order No. Full set 513-982F Dial reading 0-15-0 Accuracy .0005" Measuring force 0.3N or less Remarks
Note: See page 221 for set configurations.
High Precision Type Compact Type
Doubled Scale Spacing Dustproof
Long Contact Point Jeweled Anti-Magnetic
Revolution Counter Water resistance
239
Dial Test Indicator
SERIES 513 Universal Type
Dimensions
36 Unit: mm 25 17
92
DIAL TEST INDICATORS
24.1
50
513-304GE
513-304GE
Set Configurations
FEATURES
Universal application to all directions. (Not only the direction of the measuring point, but also the direction of measurement itself can be adjusted 360 degrees without moving the indicator.)
Full Set Basic Unit
Carbide contact point, 2mm (102825) Indicator Contact point, 1mm Swivel clamp, 900321 (for 4mm stem, 8mm stem, dovetail) or 900322 (for 4mm stem, 3/8" DIA. stem, dovetail)
8mm stem or 3/8" DIA. stem
Contact point, 3mm
OPTIONAL ACCESSORIES
Order No. 102824 102832 102826 Description Contact point, 1mm ball (Steel) Contact point, 2mm ball (Steel) Contact point, 3mm ball (Steel)
Knurled clamp ring
Metric holding bar (900209) or inch holding bar (900306)
Spanner (102037)
Stem, 4mm
Spare contact point (2mm, carbide)
SPECIFICATIONS
Metric Graduation 0.01mm Inch Graduation .0005" Range 0.3" Order No. Basic unit 513-302G Order No. Full set 513-302GT Dial reading 0-15-0 Accuracy .0005" Measuring force 0.3N or less Remarks Range 0.8mm Order No. Basic unit 513-304GE Order No. Full set 513-304GT Dial reading 0-40-0 Accuracy 8m Measuring force 0.3N or less Remarks
High Precision Type Compact Type
Doubled Scale Spacing Dustproof
Long Contact Point Jeweled Anti-Magnetic
Revolution Counter Water resistance
240
Accessories for Dial Test Indicators
Contact Points (for Metric Model Only*)
*Except for universal type dial test indicator (513-304 and 513-944).
Swivel Clamps
Can be used with Holding Bars.
For 4mm stem, 8mm stem, and dovetail For .157" DIA. stem, 3/8" DIA. stem, and dovetail
Use a contact point with the proper length for accurate measurement.
L
0.5mm ball
0.7mm ball
900321
900322
1mm ball
2mm ball (Carbide)
9x9mm
953638 (Length: 50mm) 900209 (Length: 100mm)
21CZA044 (L=12.8mm) 103017 (L=14.7mm) 103013 (L=20.9mm) 137558 (L=22.3mm) 137746 (L=36.8mm) 136235 (L=44.5mm)
21CZA036 (L=12.8mm) 103010 (L=14.7mm) 103006 (L=20.9mm) 137557 (L=22.3mm) 129949 (L=36.8mm) 136013 (L=44.5mm)
8mm
900211 (Length: 115mm)
2mm ball
3mm ball
.25"x.5" 953639 (Length: 2") 900306 (Length: 4")
103016 (L=14.7mm) 103012 (L=20.9mm)
21CZA045 (L=12.8mm) 103018 (L=14.7mm) 103014 (L=20.9mm) 137559 (L=22.3mm) 137747 (L=36.8mm) 136236 (L=44.5mm)
Universal Holder
Allows the indicator to be set at a desired position.
Universal holder
Stems with Knurled Clamp Ring
4mm (.157" DIA.) 8mm 3/8" DIA.
901916 (8mm stem) 901459 (.25" DIA. stem)
902802
902804
902805
Centering Holder
Allows large diameter cylinders or holes to be centered.
4mm and 8mm
.157" DIA. and 3/8" DIA.
902806
902808
901959 (8mm stem) 901997 (.25" DIA. stem)
Centering holder
241
DIAL TEST INDICATORS
190547 (L=14.7mm) 190549 (L=20.9mm) 190654 (L=22.3mm) 190656 (L=44.5mm)
190548 (L=14.7mm) 190550 (L=20.9mm) 190653 (L=22.3mm) 190655 (L=44.5mm)
Holding Bars
Pocket Type Dial Test Indicators
SERIES 513
513-514T
Dimensions
23 8 7 Unit: mm
DIAL TEST INDICATORS
513-517WT
513-517T
17 32
513-515T
46
9.5
Order No.* 513-514T 513-517T 513-515T 513-503T 513-501T
*Full set
L 36.8 20.9 44.5 14.7 12
513-527T
23 8 7
513-503T 513-501T
23 8
32
9.5
Jeweled bearings assure higher sensitivity and accuracy. Reversible measuring direction. Two holding bars are supplied. (Full sets only.) Fully adjustable bezel/dial face. Contact point is adjustable within 220.
27.5
FEATURES
29
14
9.5
14.7
513-517WT
513-527T
High Precision Type Compact Type
Doubled Scale Spacing Dustproof
Long Contact Point Jeweled Anti-Magnetic
Revolution Counter Water resistance
242
21
46
17
513-514E/T
513-517E/T 513-517WE/WT 513-527E/T
513-515T
513-503E/T
513-501E/T
SPECIFICATIONS
Metric Graduation 0.01mm Range 0.5mm 0.8mm Order No. Basic unit 513-514E 513-517E 513-517WE 513-527E 513-503E 513-501E Order No. Full set 513-514T 513-517T 513-517WT 513-527T 513-515T 513-503T 513-501T Dial reading 0-25-0 0-40-0 0-40-0 0-40-0 0-50-0 0-100-0 0-70-0 Accuracy 10m 8m 8m 8m 10m 3m 3m Measuring force 0.3N or less 0.3N or less 0.3N or less 0.3N or less 0.3N or less 0.3N or less 0.3N or less Remarks
0.002mm 0.001mm Inch Graduation .001" .0005" .0001"
1mm 0.2mm 0.14mm
Range .04" .02" .01"
Order No. Basic unit 513-518 513-528 513-512 513-504
Order No. Full set 2513-518T 513-528T 513-512T 513-504T
Dial reading 0-20-0 0-20-0 0-10-0 0-5-0
Accuracy .001" .001" .0005" .0002"
Measuring force 0.3N or less 0.3N or less 0.3N or less 0.3N or less
Remarks
Set Configurations
Metric Full Set Basic Set Basic Unit
Swivel clamp (900319, for 4mm and 8mm) Contact point, 2mm (Carbide) Indicator Contact point, .079" DIA. (Carbide)
Inch Full Set
Contact point, .039" DIA.
Basic Unit
Contact point, .118" DIA.
Stem, .157" DIA. Swivel clamp (900291, for .157" DIA. and 3/8" DIA.) Inch holding bar (900306)
Metric holding bar (900209)
Indicator
Stem, 8mm
Stem, 4mm
Stem, 3/8" DIA. 28mm holding rod .315" DIA. holding rod (900211)
Spanner (301336)
Spanner (301336)
High Precision Type Compact Type
Doubled Scale Spacing Dustproof
Long Contact Point Jeweled Anti-Magnetic
Revolution Counter Water resistance
243
DIAL TEST INDICATORS
Accessories
for Pocket Type Dial Test Indicators Contact Points (for Metric Model Only)
Use a contact point with the proper length for accurate measurement.
L
Swivel Clamps
Can be used with Holding Bars.
For 4mm stem and 8mm stem For .157" DIA. stem and 3/8" DIA. stem
900319
DIAL TEST INDICATORS
900291
0.5mm ball
0.7mm ball
Holding Bars
190547 (L=14.7mm) 190549 (L=20.9mm) 190656 (L=44.5mm)
190548 (L=14.7mm) 190550 (L=20.9mm) 190655 (L=44.5mm)
9x9mm
953638 (Length: 50mm) 900209 (Length: 100mm)
1mm ball
2mm ball (Carbide)
8mm 900211 (Length: 115mm)
136756 (L=12.1mm) 103017 (L=14.7mm) 103013 (L=20.9mm) 136235 (L=44.5mm)
136104 (L=12.1mm) 103010 (L=14.7mm) 103006 (L=20.9mm) 136013 (L=44.5mm)
.25"x.5"
953639 (Length: 2") 900306 (Length: 4")
2mm ball
3mm ball
136757 (L=12.1mm) 103016 (L=14.7mm) 103012 (L=20.9mm)
136758 (L=12.1mm) 103018 (L=14.7mm) 103014 (L=20.9mm) 136236 (L=44.5mm)
Universal Holder
Since the Dial Test Indicator can be swiveled to a desired angle, the holder is useful for centering workpieces and installing workpieces on a milling machine.
901917 (8mm stem) 901546 (.25" DIA. stem)
Stems
4mm (.157" DIA.) 8mm 3/8" DIA.
Universal holder
102036
102822
102081
244
