Getting started with

Logitech® Wireless Speaker

for iPad®

Getting started with

Logitech® Wireless Speaker
for iPad®

1 1
567

3
4

1. Power/battery-life indicator LED

2. Wireless connection indicator LED
3. 3.5 mm auxiliary input
4. Power input
5. Volume up
6. Power on/off
7. Volume down

6
www.logitech.com

Fully charging the battery can take up to six hours.

Your speaker can be used while charging.
© 2011 Logitech. Logitech, the Logitech logo, and other Logitech marks are owned by Logitech and may
be registered. Microsoft, Windows Vista, Windows, and the Windows logo are trademarks of the Microsoft
group of companies. Apple, iPod, iPhone, Mac, and Macintosh are trademarks of Apple Inc., registered in the U.S.
and other countries. iPad is a trademark of Apple Inc. All other trademarks are the property of their respective
owners. Logitech assumes no responsibility for any errors that may appear in this manual. Information
contained herein is subject to change without notice.

620-003518.002
Connecting your Wireless 2. Simultaneously hold down the Volume 3. Power on your iPad or iPhone. Useful notes and tips
Up and Volume Down buttons on the You can only connect your Wireless Speaker
Speaker with your iPad® back of your Wireless Speaker for 10
4. Select the Settings icon.
with one device at a time.
or iPhone® seconds. The green wireless connection 5. Select the General icon.
If the wireless connection is lost between
To connect with your iPad or iPhone (or one LED will begin blinking quickly. 6. Select the Bluetooth menu, and ensure your iPad or iPhone and your speaker, you
other Bluetooth® device), please follow the that Bluetooth is turned on. will need to follow steps 4 through 7 to re-
instructions below: 7. Find the Logitech Wireless Speaker and establish the wireless connection.
1. Power on your Wireless Speaker. select it. When your Wireless Speaker is connected
8. Confirm that you want to connect the to your iPad or iPhone, you must adjust
Wireless Speaker with your iPad or the volume through the controls on the
iPhone by selecting the Pair button. Wireless Speaker.
A confirmation window appears The Logitech Wireless Speaker will pair
after you have selected the Wireless with two wireless devices. If you decide to
Speaker. There may be a slight delay so pair an additional wireless device to your
please wait. Wireless Speaker, the previous pairing will
9. Your Wireless Speaker is now connected be lost.
with your iPad or iPhone.
Your Wireless Speaker will always connect
to the last connected device. So the next
time you turn on your speaker, it will
connect to your iPad or iPhone if either unit
was the last connected device.

Battery-life indicators Wireless connection indicators

Discharging Solid green Connection made between iPad and speaker
Solid green 50–100% battery life Flashing green Seeking a connection between iPad and speaker. Green
Solid orange 10–<50% battery life light will flash for 5 minutes before going out.

Solid red <10% battery life No light iPad or speaker is out of wireless range for more than 5
minutes or speaker is powered off
No light Speaker is off or battery needs recharging
Note: Wireless connection indicators disabled when using 3.5 auxiliary input.
Charging Help with Setup
Solid green 100% charged Something not sound right? No sound at all?
Pulsing green 50–<100% charged • Move the speaker closer to your iPad.
• Adjust the volume to an audible setting in your audio source and speaker.
Pulsing orange 10–<50% charged
• If another audio device was plugged directly into the speaker, make sure the 3.5 mm
Pulsing red <10% charged cable is unplugged.
• Quit your music application and then restart it.
Note: The battery is removable for disposal/recycling only. Please see www.logitech.
com/support for more information. Visit www.logitech.com for more troubleshooting tips.
If you quickly press the power button, your speaker will turn off but will continue to
charge its battery. If you hold the power button down for 10 seconds, your speaker
will turn off and go into a power-conservation mode, which will stop its battery
from charging.
Note: If your speaker is charging in the “off” state, it will automatically turn completely
off after its battery is fully charged.

www.logitech.com/support What do you think?

Please take a minute to tell us. Thank you for purchasing our product.

United States +1 646-454-3200

www.logitech.com/ithink