Pilatus PC-12/47E 2
Uploaded by
Haneet BhardwajPilatus PC-12/47E 2
Uploaded by
Haneet Bhardwaj12-B-AGE-00-I
UNCLASSIFIED
Model type - PC-12/47E MSN-1001-UP
Tool And Equipment Manual (TEM)
Document Number 02306
12-B-AGE-00-I
Effectivity: All 12-B-AGE-00-I
UNCLASSIFIED
©PILATUS AIRCRAFT LTD. CH-6371 STANS, SWITZERLAND
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: All 12-B-AGE-00-I
UNCLASSIFIED
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
PC-12/47E GENERAL - TOOL AND EQUIPMENT MANUAL
LIST OF APPLICABLE DATA MODULES - REVISION 20
Table of Contents Page
PC-12/47E GENERAL - TOOL AND EQUIPMENT MANUAL - LIST OF APPLICABLE DATA 1
MODULES - REVISION 20.........................................................................................................
Index of Tables Page
1 References............................................................................................................. 1
References
Table 1 References
Data module/Technical publication Title
None
Description
C = Changed data module
N = New data module
Document title Data module code Issue date Effectivity
PC-12/47E GENERAL - TOOL AND 12-B-00-00-00-00D-002A-A C 2021-07-16 ALL
EQUIPMENT MANUAL - LIST OF AP-
PLICABLE DATA MODULES - REVI-
SION 20
PC-12/47E GENERAL - TOOL AND 12-B-00-00-00-00D-003A-A C 2021-07-16 All
EQUIPMENT MANUAL - CHANGE
HIGHLIGHTS - REVISION 20
PC12/47E - TEM LIST OF REVISIONS 12-B-00-00-00-00A-004C-A 2018-11-29 ALL
PC12/47E - TEM LIST OF TEMPORA- 12-B-00-00-00-00A-006C-A 2017-07-19 ALL
RY REVISIONS
GENERAL - TEM INTRODUCTION 12-B-00-00-00-00A-018C-A 2019-11-19 ALL
GENERAL - LIST OF AEROSPACE 12-B-00-00-00-00A-060A-A C 2021-07-08 ALL
GROUND EQUIPMENT (AGE) AND
TOOLS
VIDEO BORESCOPE (P/N 12-B-05-00-00-00A-066A-A 2017-07-19 ALL
990.00.00.254) - AGE AND TOOLS DA-
TA
Effectivity: ALL 12-B-00-00-00-00D-002A-A
UNCLASSIFIED 2021-07-16 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Document title Data module code Issue date Effectivity
VIDEO BORESCOPE (P/N 12-B-05-00-00-00A-066B-A 2017-07-19 ALL
990.00.00.263) - AGE AND TOOLS DA-
TA
VIDEO BORESCOPE (P/N 12-B-05-00-00-00A-066C-A N 2021-07-08 ALL
990.00.00.278) - AGE AND TOOLS DA-
TA
HYDRAULIC JACK (968.85.81.230) - 12-B-07-10-02-01A-066A-A 2017-07-19 ALL
AGE AND TOOLS DATA
JACKING ADAPTOR KIT (P/N 12-B-07-10-02-02A-066A-A 2017-07-19 ALL
968.85.81.233) - AGE AND TOOLS DA-
TA
HYDRAULIC JACK (P/N 968.85.81.214) 12-B-07-10-02-03A-066A-A 2017-07-19 ALL
- AGE AND TOOLS DATA
AXLE JACK (P/N 968.85.81.218) - AGE 12-B-07-10-02-05A-066A-A 2017-07-19 ALL
AND TOOLS DATA
NOSE WHEEL JACKING ADAPTOR 12-B-07-10-02-06A-066A-A 2017-07-19 ALL
(P/N 507.20.12.052) - AGE AND
TOOLS DATA
MAIN WHEEL JACKING ADAPTOR 12-B-07-10-02-07A-066A-A 2017-07-19 ALL
(P/N 507.20.12.051) - AGE AND
TOOLS DATA
NWS LOCKING SCREW (P/N 12-B-07-10-02-08A-066A-A 2017-07-19 ALL
513.32.12.050) - AGE AND TOOLS DA-
TA
AIRCRAFT WEIGHING SYSTEM (P/N 12-B-08-10-01-00A-066A-A 2020-11-25 ALL
990.00.02.155) - AGE AND TOOLS DA-
TA
AIRCRAFT WEIGHING SYSTEM (P/N 12-B-08-10-01-00A-066B-A 2020-11-25 All
990.00.02.157) - AGE AND TOOLS DA-
TA
AIRCRAFT WEIGHING SYSTEM (P/N 12-B-08-10-01-00A-066C-A 2020-11-25 ALL
990.00.02.167) - AGE AND TOOLS DA-
TA
AIRCRAFT WEIGHING SYSTEM (P/N 12-B-08-10-01-00A-066D-A 2020-11-25 ALL
990.00.02.185) - AGE AND TOOLS DA-
TA
INCLINOMETER (P/N 903.70.32.410) - 12-B-08-20-01-00A-066A-A 2017-07-19 ALL
AGE AND TOOLS DATA
MULTIHEAD TOWBAR (P/N 12-B-09-10-01-01A-066A-A 2017-07-19 ALL
990.00.00.904) - AGE AND TOOLS DA-
TA
HEAD ATTACHMENT (P/N 12-B-09-10-01-02A-066A-A 2017-07-19 ALL
990.00.00.907) - AGE AND TOOLS DA-
TA
HEAD ATTACHMENT (P/N 12-B-09-10-01-02A-066B-A 2017-07-19 ALL
990.00.00.943) - AGE AND TOOLS DA-
TA
COCKPIT SUN SCREENS (P/N 12-B-10-10-02-01A-066A-A 2017-07-19 ALL
990.00.00.881) - AGE AND TOOLS DA-
TA
Effectivity: ALL 12-B-00-00-00-00D-002A-A
UNCLASSIFIED 2021-07-16 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Document title Data module code Issue date Effectivity
WHEEL CHOCK SET (P/N 12-B-10-10-02-03A-066A-A 2017-07-19 All
990.00.00.909) - AGE AND TOOLS DA-
TA
TIRE/STRUT SERVICE GAGE (P/N 12-B-12-10-06-01A-066A-A 2017-07-19 ALL
903.70.32.911) - AGE AND TOOLS DA-
TA
OXYGEN TROLLEY (P/N 12-B-12-10-06-02A-066A-A 2017-07-19 ALL
990.00.00.601) - AGE AND TOOLS DA-
TA
OXYGEN ADAPTOR (P/N 12-B-12-10-06-03A-066A-A 2017-07-19 ALL
990.00.00.604) - AGE AND TOOLS DA-
TA
FUEL SAMPLE UNIT (P/N 12-B-12-10-06-04A-066A-A 2017-07-19 ALL
990.00.00.908) - AGE AND TOOLS DA-
TA
NITROGEN CART WITH BOOSTER 12-B-12-10-06-05A-066A-A 2017-07-19 ALL
(P/N 990.00.00.702) - AGE AND
TOOLS DATA)
STATIC PORT WASH COVER (P/N 12-B-12-20-01-00A-066A-A 2017-07-19 ALL
990.00.00.167) - AGE AND TOOLS DA-
TA
CIRCUIT BREAKER SAFETY CLIP 12-B-12-20-07-01A-066A-A 2017-07-19 ALL
(P/N 110.88.07.065) - AGE AND
TOOLS DATA
COMPRESSION SPRAYER (P/N 12-B-12-20-07-02A-066A-A 2017-07-19 ALL
968.86.93.124) - AGE AND TOOLS DA-
TA
GREASE GUN (P/N 904.21.02.103) - 12-B-12-20-07-03A-066A-A 2017-07-19 ALL
AGE AND TOOLS DATA
GREASE GUN (P/N 904.21.02.104) - 12-B-12-20-07-03A-066B-A 2017-07-19 ALL
AGE AND TOOLS DATA
GREASE GUN (P/N 904.21.02.102) - 12-B-12-20-07-03A-066C-A N 2021-07-08 ALL
AGE AND TOOLS DATA
GREASE GUN (P/N 904.21.02.702) - 12-B-12-20-07-03A-066D-A N 2021-07-08 ALL
AGE AND TOOLS DATA
GREASE GUN (P/N 904.21.02.110) - 12-B-12-20-07-03A-066E-A N 2021-07-08 ALL
AGE AND TOOLS DATA
CORROSION TREATMENT EQUIP- 12-B-20-40-01-01A-066A-A 2017-07-19 ALL
MENT PUMP (P/N 904.21.06.622) -
AGE AND TOOLS DATA
CORROSION TREATMENT EQUIP- 12-B-20-40-01-02A-066A-A 2017-07-19 ALL
MENT PRESSURE CUP (P/N
904.21.06.623) - AGE AND TOOLS DA-
TA
CABIN PRESSURIZATION UNIT (P/N 12-B-21-30-30-00A-066A-A 2017-07-19 ALL
990.00.00.660) - AGE AND TOOLS DA-
TA
CABIN PRESSURIZATION UNIT (P/N 12-B-21-30-30-01A-066A-A 2017-07-19 ALL
990.00.00.661) - AGE AND TOOLS DA-
TA
Effectivity: ALL 12-B-00-00-00-00D-002A-A
UNCLASSIFIED 2021-07-16 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Document title Data module code Issue date Effectivity
CABIN PRESSURIZATION UNIT (P/N 12-B-21-30-30-02A-066A-A 2017-07-19 ALL
990.00.00.663) - AGE AND TOOLS DA-
TA
ADAPTER KIT – CABIN PRESSURIZA- 12-B-21-30-30-03A-066A-A 2017-07-19 ALL
TION UNIT (P/N 990.00.00.662) - AGE
AND TOOLS DATA
QUICK CAL (P/N 990.00.00.818) - AGE 12-B-21-40-17-02A-066A-A 2017-07-19 ALL
AND TOOLS DATA
QUICK CAL (P/N 990.00.00.819) - AGE 12-B-21-40-17-03A-066A-A 2017-07-19 ALL
AND TOOLS DATA
SPECIAL INSERT (P/N 513.21.21.002) 12-B-21-40-17-05A-066A-A 2017-07-19 ALL
- AGE AND TOOLS DATA
SPECIAL INSERT (P/N 513.21.21.007) 12-B-21-40-17-05A-066B-A N 2021-07-08 ALL
- AGE AND TOOLS DATA
AIR CONDITIONING SERVICE STA- 12-B-21-50-04-02A-066A-A 2017-07-19 R134A RE-
TION (P/N 990.00.09.216) - AGE AND FRIGERANT
TOOLS DATA
AIR CONDITIONING SERVICE STA- 12-B-21-50-04-02A-066B-A 2017-07-19 220-240 Volt
TION 220–240 VOLTS (P/N
990.00.09.207) - AGE AND TOOLS DA-
TA
AIR CONDITIONING SERVICE STA- 12-B-21-50-04-02A-066C-A 2017-07-19 110 Volt
TION 110 VOLT (P/N 990.00.09.206) -
AGE AND TOOLS DATA
SERVICE KIT (P/N 990.00.09.213) - 12-B-21-50-04-03A-066A-A 2017-07-19 R134A RE-
AGE AND TOOLS DATA FRIGERANT
UV LEAK DETECTION LIGHT (P/N 12-B-21-50-04-04A-066A-A 2020-11-25 ALL
990.00.09.236) - AGE AND TOOLS DA-
TA
ADAPTOR (P/N 985.92.03.903) - AGE 12-B-22-10-08-01A-066A-A 2017-07-19 ALL
AND TOOLS DATA
CLUTCH PLATE (P/N 985.92.03.902) - 12-B-22-10-08-02A-066A-A 2017-07-19 ALL
AGE AND TOOLS DATA
KIT, INDICATOR AOA RIGGING 12-B-22-20-07-00A-066A-A 2017-07-19 ALL
GAUGE (P/N 513.34.09.106) - AGE
AND TOOLS DATA
AOA CALIBRATION TOOL, LH (P/N 12-B-22-20-07-01A-066A-A 2017-07-19 ALL
513.22.12.055) - AGE AND TOOLS DA-
TA
AOA CALIBRATION TOOL, RH (P/N 12-B-22-20-07-02A-066A-A 2017-07-19 ALL
513.22.12.056) - AGE AND TOOLS DA-
TA
TORQUE SIMULATOR (P/N 12-B-22-20-07-03A-066A-A 2017-07-19 ALL
513.22.12.001) - AGE AND TOOLS DA-
TA
TORQUE SIMULATOR (P/N 12-B-22-20-07-03A-066B-A 2017-07-19 ALL
513.22.12.011) - AGE AND TOOLS DA-
TA
Effectivity: ALL 12-B-00-00-00-00D-002A-A
UNCLASSIFIED 2021-07-16 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Document title Data module code Issue date Effectivity
ANTENNA RELEASE TOOL (P/N 12-B-23-11-05-01A-066A-A 2017-07-19 ALL
110.85.07.347) - AGE AND TOOLS DA-
TA
SPRING BALANCE (P/N 12-B-23-11-05-02A-066A-A 2017-07-19 ALL
110.85.07.251) - AGE AND TOOLS DA-
TA
SPRING BALANCE (P/N 12-B-23-11-05-02A-066B-A 2017-07-19 ALL
903.70.32.818) - AGE AND TOOLS DA-
TA
SATCOM MAINTENANCE CABLE (P/N 12-B-23-16-01-00A-066A-A 2020-11-25 MSN 545,
985.83.14.226) - AGE AND TOOLS DA- 1001 - 1719,
TA 1721 -1942
SATCOM MAINTENANCE CABLE (P/N 12-B-23-16-01-00A-066B-A 2020-11-25 SATCOM
985.99.99.634) - AGE AND TOOLS DA- AEROWAVE
TA 100; MSN
1720, 2001 -
UP
BATTERY CHARGER/ANALYZER (P/N 12-B-24-00-01-01A-066A-A 2017-07-19 NICKEL/
110.85.07.410) - AGE AND TOOLS DA- CADMIUM
TA BATTERIES
STARTER/GEN QAD ADAPTOR 12-B-24-00-01-02A-066A-A 2017-07-19 ALL
WRENCH SOCKET (P/N
513.24.09.025) - AGE AND TOOLS DA-
TA
SARSAT BEACON TESTER (P/N 12-B-25-63-01-00A-066A-A 2017-07-19 ALL
990.00.00.211) - AGE AND TOOLS DA-
TA
SARSAT BEACON TESTER (P/N 12-B-25-63-01-00A-066B-A 2017-07-19 ALL
990.00.00.215) - AGE AND TOOLS DA-
TA
ULTRASONIC TEST SET - TS500 (P/N 12-B-25-63-04-00A-066A-A 2018-05-24 ALL
990.00.00.266) - AGE AND TOOLS DA-
TA
TURNBUCKLE FIX TOOL (P/N 12-B-27-00-00-00A-066A-A 2020-05-15 ALL
513.27.24.258) - AGE AND TOOLS DA-
TA
RIGGING PIN (P/N 110.85.07.050) - 12-B-27-10-03-01A-066A-A 2017-07-19 ALL
AGE AND TOOLS DATA
TENSIOMETER (P/N 110.85.07.242) - 12-B-27-10-03-02A-066A-A 2017-07-19 ALL
AGE AND TOOLS DATA
TENSIOMETER (P/N 903.70.31.504) - 12-B-27-10-03-02A-066B-A 2017-07-19 All
AGE AND TOOLS DATA
RIGGING PIN (P/N 110.85.07.252) - 12-B-27-10-03-03A-066A-A 2017-07-19 ALL
AGE AND TOOLS DATA
RIGGING PIN (P/N 513.27.12.050) - 12-B-27-10-03-04A-066A-A 2017-07-19 ALL
AGE AND TOOLS DATA
RIGGING BLOCK ASSEMBLY (P/N 12-B-27-10-03-05A-066B-A 2017-07-19 All
513.27.12.075) - AGE AND TOOLS DA-
TA
Effectivity: ALL 12-B-00-00-00-00D-002A-A
UNCLASSIFIED 2021-07-16 Page 5
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Document title Data module code Issue date Effectivity
RUDDER BALANCING ADAPTOR (P/N 12-B-27-20-03-01A-066A-A 2017-07-19 ALL
513.27.12.051) - AGE AND TOOLS DA-
TA
RIGGING PIN (P/N 513.27.72.001) - 12-B-27-30-03-01A-066A-A 2017-07-19 ALL
AGE AND TOOLS DATA
FCWU MAINTENANCE UTILITY DISC 12-B-27-50-10-02A-066B-A 2017-07-19 ALL
(P/N 513.27.12.001) - AGE AND
TOOLS DATA
FCWU MAINTENANCE UTILITY DISC 12-B-27-50-10-02A-066C-A 2017-07-19 ALL
(P/N 513.27.12.002) - AGE AND
TOOLS DATA
GREASE GUN (P/N 904.21.01.103) - 12-B-27-50-10-03A-066A-A 2017-07-19 ALL
AGE AND TOOLS DATA
TEMPLATE (P/N 513.27.12.066) - AGE 12-B-27-50-10-04A-066A-A 2017-07-19 ALL
AND TOOLS DATA
BACKLASH MEASURING TOOL (P/N 12-B-27-50-10-06A-066A-A 2017-07-19 BLACK COL-
978.73.20.902) - AGE AND TOOLS DA- ORED FLAP
TA ACTUATORS
BOOSTER PUMP INSTALLATION 12-B-28-20-01-01A-066A-A N 2021-07-08 BLACK COL-
TOOL (P/N 513.28.12.004) - AGE AND ORED FLAP
TOOLS DATA ACTUATORS
SIMPLIFIED SCI READER SOFTWARE 12-B-28-40-10-01A-066A-A C 2021-07-08 MSN 545,
(P/N 513.28.12.001) - AGE AND 1001-1719
TOOLS DATA and
1721-1942
SCI INTERFACE USB CABLE (P/N 12-B-28-40-10-02A-066A-A 2017-07-19 ALL
990.00.00.856) - AGE AND TOOLS DA-
TA
SIMPLIFIED SCI READER SOFTWARE 12-B-28-40-10-01A-066B-A C 2021-07-08 MSN 545,
(P/N 513.28.12.002) - AGE AND 1001-1719
TOOLS DATA and
1721-1942
SIMPLIFIED SCI READER SOFTWARE 12-B-28-40-10-01A-066C-A C 2021-07-08 MSN 1720,
(P/N 513.28.12.003) - AGE AND 2001 and UP
TOOLS DATA
OAT SIMULATOR (P/N 513.30.12.004) - 12-B-30-60-03-01A-066B-A C 2021-07-08 ALL
AGE AND TOOLS DATA
OAT SIMULATOR (P/N 513.30.12.007) - 12-B-30-60-03-01A-066C-A N 2021-07-08 ALL
AGE AND TOOLS DATA
PROPELLER DE-ICE TEST SET (P/N 12-B-30-60-04-01A-066A-A 2018-05-24 ALL
985.99.99.631) - AGE AND TOOLS DA-
TA
FRED FILE (P/N 531.30.12.023) - AGE 12-B-31-30-10-00A-066A-A 2017-07-19 LDR
AND TOOLS DATA
FRED FILE (P/N 531.30.12.027) - AGE 12-B-31-30-10-00A-066B-A 2017-07-19 LDR
AND TOOLS DATA
FRED FILE (P/N 531.30.12.029) - AGE 12-B-31-30-10-00A-066C-A 2018-11-29 LDR
AND TOOLS DATA
FRED FILE (P/N 531.30.12.032) - AGE 12-B-31-30-10-00A-066D-A 2019-11-19 LDR
AND TOOLS DATA
Effectivity: ALL 12-B-00-00-00-00D-002A-A
UNCLASSIFIED 2021-07-16 Page 6
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Document title Data module code Issue date Effectivity
CVFDR AND ACMS DATA ANALYSIS 12-B-31-30-10-01A-066A-A 2018-11-29 L-3 LDR1000
TOOLS (P/N 513.31.12.002) - AGE LDR and
AND TOOLS DATA APEX Build 6
or higher.
ACMS AND LDR DATA ANALYSIS 12-B-31-30-10-01A-066B-A 2018-11-29 LDR
DISC (P/N 513.31.12.003) - AGE AND
TOOLS DATA
HYDRAULIC BEADBREAKER (P/N 12-B-32-00-01-01A-066A-A 2017-07-19 ALL
990.00.02.101) - AGE AND TOOLS DA-
TA
TIRE RING 9 INCH (P/N 990.00.02.107) 12-B-32-00-01-02A-066A-A 2017-07-19 ALL
- AGE AND TOOLS DATA
TIRE RING 13 INCH (P/N 12-B-32-00-01-03A-066A-A 2017-07-19 ALL
990.00.02.105) - AGE AND TOOLS DA-
TA
ADJUSTMENT TOOL (P/N 12-B-32-10-04-01A-066A-A 2017-07-19 ALL
513.32.12.057) - AGE AND TOOLS DA-
TA
NITROGEN TROLLEY (P/N 12-B-32-10-04-02A-066A-A 2017-07-19 ALL
990.00.00.701) - AGE AND TOOLS DA-
TA
PROXIMITY SWITCH TEST BOX (P/N 12-B-32-10-04-03A-066A-A 2017-07-19 ALL
985.99.99.602) - AGE AND TOOLS DA-
TA
LANDING GEAR TOOL KIT (P/N 12-B-32-10-04-04A-066A-A 2017-07-19 ALL
513.32.12.002) - AGE AND TOOLS DA-
TA
DIGITAL FORCE GAGE (P/N 12-B-32-20-07-01A-066A-A 2017-07-19 ALL
903.70.32.921) - AGE AND TOOLS DA-
TA
DIGITAL FORCE GAGE P/N 12-B-32-20-07-01A-066B-A 2017-07-19 ALL
903.70.32.924 - AGE AND TOOLS DA-
TA
FORK (P/N 513.32.12.047) - AGE AND 12-B-32-20-07-02A-066A-A 2017-07-19 ALL
TOOLS DATA
COMPRESSION TOOL (P/N 12-B-32-20-07-03A-066A-A 2017-07-19 ALL
513.32.12.052) - AGE AND TOOLS DA-
TA
TORQUE WRENCH ADAPTOR (P/N 12-B-32-30-06-01A-066A-A 2017-07-19 ALL
904.10.89.227) - AGE AND TOOLS DA-
TA
WRENCH (P/N 904.10.08.228) - AGE 12-B-32-30-06-02A-066A-A 2017-07-19 ALL
AND TOOLS DATA
TEST BOX (P/N 513.32.12.023) - AGE 12-B-32-30-06-05A-066A-A 2017-07-19 All
AND TOOLS DATA
BRAKE BLEEDING RIG (P/N 12-B-32-40-07-01A-066A-A 2017-07-19 ALL
990.00.00.160) - AGE AND TOOLS DA-
TA
Effectivity: ALL 12-B-00-00-00-00D-002A-A
UNCLASSIFIED 2021-07-16 Page 7
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Document title Data module code Issue date Effectivity
BRAKE BLEEDING ADAPTOR KIT (P/N 12-B-32-40-07-02A-066A-A 2017-07-19 ALL
990.00.00.161) - AGE AND TOOLS DA-
TA
SOCKET (P/N 904.10.62.141) - AGE 12-B-32-40-07-03A-066A-A 2017-07-19 ALL
AND TOOLS DATA
SOCKET (P/N 904.10.62.131) - AGE 12-B-32-40-07-04A-066A-A 2017-07-19 ALL
AND TOOLS DATA
WRENCH (P/N 904.10.00.038) - AGE 12-B-32-40-07-05A-066A-A 2017-07-19 ALL
AND TOOLS DATA
TORQUE WRENCH (P/N 12-B-32-40-07-06A-066A-A 2017-07-19 ALL
904.10.89.120) - AGE AND TOOLS DA-
TA
TORQUE WRENCH (P/N 12-B-32-40-07-06A-066B-A 2020-11-25 ALL
904.10.89.142) - AGE AND TOOLS DA-
TA
TORQUE WRENCH ADAPTOR (P/N 12-B-32-40-07-08A-066A-A 2017-07-19 ALL
904.10.89.186) - AGE AND TOOLS DA-
TA
TORQUE WRENCH ADAPTOR (P/N 12-B-32-40-07-08A-066B-A 2020-11-25 ALL
513.32.12.117) - AGE AND TOOLS DA-
TA
WHEEL BALANCER (P/N 12-B-32-40-07-09A-066A-A 2017-07-19 ALL
990.00.02.109) - AGE AND TOOLS DA-
TA
SHIMMY DAMPER LEVEL GAUGE AS- 12-B-32-50-01-00A-066A-A 2019-11-19 All
SEMBLY (P/N 513.32.12.132) - AGE
AND TOOLS DATA
MLG FOLDING STRUT GAGE (P/N 12-B-32-60-05-00A-066A-A 2017-07-19 ELECTRO
513.32.12.114) - AGE AND TOOLS DA- MECHANICAL
TA LANDING
GEAR
AIRCRAFT ADAPTOR CABLE (P/N 12-B-32-60-10-00A-066A-A 2017-07-19 ELECTRO
985.99.99.615) - AGE AND TOOLS DA- MECHANICAL
TA LANDING
GEAR
PROXIMITY SWITCH ADAPTOR CA- 12-B-32-60-10-00A-066B-A 2017-07-19 ELECTRO
BLE (P/N 985.99.99.616) - AGE AND MECHANICAL
TOOLS DATA LANDING
GEAR
SAFETY GLASSES - AGE AND TOOLS 12-B-33-00-01-00A-066A-A 2017-07-19 ALL
DATA
PITOT TEST ADAPTOR (P/N 12-B-34-11-30-01A-066A-A 2017-07-19 ALL
990.00.00.206) - AGE AND TOOLS DA-
TA
STATIC TEST ADAPTOR (P/N 12-B-34-11-30-03A-066A-A 2017-07-19 ALL
990.00.00.208) - AGE AND TOOLS DA-
TA
STATIC BLANKING ADAPTOR (P/N 12-B-34-11-30-04A-066A-A 2017-07-19 ALL
990.00.00.209) - AGE AND TOOLS DA-
TA
Effectivity: ALL 12-B-00-00-00-00D-002A-A
UNCLASSIFIED 2021-07-16 Page 8
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Document title Data module code Issue date Effectivity
AIR DATA TEST SET (P/N 12-B-34-11-30-05A-066A-A 2017-07-19 ALL
990.00.00.225) - AGE AND TOOLS DA-
TA
AIR DATA TEST SET (P/N 12-B-34-11-30-05A-066B-A 2017-07-19 ALL
990.00.00.240) - AGE AND TOOLS DA-
TA
AIR DATA TEST SET ADVANCED 12-B-34-11-30-05A-066C-A 2017-07-19 ALL
HAND TERMINAL (P/N 990.00.00.241)
- AGE AND TOOLS DATA
AIR DATA TEST SET (P/N 12-B-34-11-30-05A-066D-A 2020-05-15 ALL
990.00.00.257) - AGE AND TOOLS DA-
TA
DIAL INDICATOR (P/N 903.70.14.807) - 12-B-34-11-30-10A-066A-A 2017-07-19 ALL
AGE AND TOOLS DATA
MOUNTING BLOCK (P/N 12-B-34-11-30-15A-066A-A 2017-07-19 ALL
513.34.12.010) - AGE AND TOOLS DA-
TA
COMPASS SWING TROLLEY (P/N 12-B-34-21-02-02A-066A-A 2017-07-19 ALL
513.34.09.019) - AGE AND TOOLS DA-
TA
COMPASS SWING TROLLEY (P/N 12-B-34-21-02-02A-066B-A 2017-07-19 ALL
513.34.09.029) - AGE AND TOOLS DA-
TA
SUB–D CABLE (P/N 990.00.01.201) - 12-B-34-57-05-02A-066A-A 2017-07-19 ALL
AGE AND TOOLS DATA
WRENCH, OXYGEN ADAPTOR, 12-B-35-10-03-01A-066A-A 2017-07-19 ALL
COCKPIT (P/N 513.35.12.050) - AGE
AND TOOLS DATA
WRENCH – OXYGEN ADAPTOR, CAB- 12-B-35-20-05-01A-066A-A 2017-07-19 ALL
IN (P/N 513.35.12.051) - AGE AND
TOOLS DATA
MAINTENANCE TEST BOX (P/N 12-B-45-00-01-00A-066A-A C 2021-07-08 All
985.99.99.610) - AGE AND TOOLS DA-
TA
MAINTENANCE BOX NG (P/N 12-B-45-00-01-00A-066B-A 2020-05-15 All
985.99.99.638) - AGE AND TOOLS DA-
TA
MAINTENANCE BOX UPGRADE KIT 12-B-45-00-01-00A-066C-A N 2021-07-08 All
(P/N 985.99.99.636) - AGE AND
TOOLS DATA
LAPTOP COMPUTER - AGE AND 12-B-45-45-00-00A-066A-A 2017-07-19 ALL
TOOLS DATA
LAN KIT LTEPIC–25 - AGE AND 12-B-45-45-01-00A-066A-A 2017-07-19 LTEPIC-25
TOOLS DATA
LAN KIT LANTAP–10 (P/N 12-B-45-45-01-00A-066B-A 2017-07-19 LANTAP-10
990.00.01.203) - AGE AND TOOLS DA-
TA
LAN KIT (P/N 990.00.01.208) - AGE 12-B-45-45-01-00A-066C-A 2017-07-19 ALL
AND TOOLS DATA
Effectivity: ALL 12-B-00-00-00-00D-002A-A
UNCLASSIFIED 2021-07-16 Page 9
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Document title Data module code Issue date Effectivity
LAN KIT 10MBIT (P/N 990.00.01.209) - 12-B-45-45-01-00A-066D-A 2017-07-19 ALL
AGE AND TOOLS DATA
USB LAN KIT 100MBIT (P/N 12-B-45-45-01-00A-066E-A C 2021-07-08 ALL
990.00.01.210) - AGE AND TOOLS DA-
TA
APPLE iPAD - AGE AND TOOLS DATA 12-B-46-21-00-00A-066A-A 2017-07-19 ALL
EDDY CURRENT TEST DEVICE (P/N 12-B-51-00-00-00A-066A-A 2017-07-19 ALL
990.00.02.181) - AGE AND TOOLS DA-
TA
ADJUSTMENT KIT (P/N 513.52.12.010) 12-B-52-30-10-01A-066A-A 2017-07-19 ALL
- AGE AND TOOLS DATA
PLUG WING/FUSELAGE SPANNER 12-B-57-00-04-01A-066A-A 2017-07-19 ALL
SET (P/N 513.24.12.001) - AGE AND
TOOLS DATA
WING REMOVAL/INSTALLATION KIT 12-B-57-00-04-02A-066A-A 2017-07-19 MSN 1001 -
(P/N 513.57.12.001) - AGE AND 1575
TOOLS DATA
MEASURING TOOL KIT (P/N 12-B-57-00-04-03A-066A-A 2017-07-19 ALL
513.57.12.003) - AGE AND TOOLS DA-
TA
BUSH REMOVAL/INSTALLATION KIT 12-B-57-00-04-04A-066A-A 2017-07-19 All
(P/N 513.57.12.004) - AGE AND
TOOLS DATA
WING REMOVAL/INSTALLATION KIT 12-B-57-00-04-05A-066A-A 2017-07-19 ALL
(P/N 513.57.12.055) - AGE AND
TOOLS DATA
DYNAMIC BALANCING EQUIPMENT 12-B-61-00-01-01A-066A-A 2017-07-19 ALL
(P/N 513.61.12.002) - AGE AND
TOOLS DATA
DYNAMIC BALANCING EQUIPMENT 12-B-61-00-01-01A-066B-A 2017-07-19 ALL
(P/N 968.29.12.989) - AGE AND
TOOLS DATA
DYNAMIC BALANCING ADAPTOR KIT 12-B-61-00-01-02A-066A-A 2017-07-19 ALL
(P/N 513.61.12.061) - AGE AND
TOOLS DATA
TORQUE WRENCH SET (P/N 12-B-61-10-02-01A-066A-A 2017-07-19 ALL
904.10.89.136) - AGE AND TOOLS DA-
TA
TORQUE WRENCH SET (P/N 12-B-61-10-02-01A-066B-A 2017-07-19 All
904.10.89.139) - AGE AND TOOLS DA-
TA
SPECIAL SOCKET (P/N 513.61.12.053) 12-B-61-10-02-02A-066A-A 2017-07-19 ALL
- AGE AND TOOLS DATA
STAND (P/N 513.61.12.050) - AGE 12-B-61-10-02-03A-066A-A 2017-07-19 ALL
AND TOOLS DATA
BETA SYSTEM PULLER (P/N 12-B-61-10-02-04A-066A-A 2017-07-19 ALL
990.00.00.906) - AGE AND TOOLS DA-
TA
Effectivity: ALL 12-B-00-00-00-00D-002A-A
UNCLASSIFIED 2021-07-16 Page 10
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Document title Data module code Issue date Effectivity
TRANSPORT CONTAINER (P/N 12-B-61-10-02-05A-066A-A N 2021-07-08 ALL
906.08.11.472) - AGE AND TOOLS DA-
TA
TRANSPORT CONTAINER (P/N 12-B-61-10-02-05A-066B-A N 2021-07-08 ALL
906.08.11.490) - AGE AND TOOLS DA-
TA
ADAPTER ASSEMBLY (P/N 12-B-61-10-02-06A-066A-A N 2021-07-08 ALL
513.61.12.015) - AGE AND TOOLS DA-
TA
ADAPTER ASSEMBLY (P/N 12-B-61-10-02-06A-066B-A N 2021-07-08 ALL
513.61.12.013) - AGE AND TOOLS DA-
TA
SUPPORT PLATE ASSEMBLY (P/N 12-B-61-10-02-07A-066A-A N 2021-07-08 ALL
513.61.21.014) - AGE AND TOOLS DA-
TA
SPINNER INLAY (P/N 990.00.02.051) - 12-B-61-10-02-08A-066A-A N 2021-07-08 ALL
AGE AND TOOLS DATA
NLG STRUT COLLAR (P/N 12-B-71-00-06-01A-066A-A 2017-07-19 ALL
513.71.12.002) - AGE AND TOOLS DA-
TA
ENGINE COMPRESSOR WASH RIG 12-B-71-00-06-02A-066A-A 2017-07-19 ALL
(P/N 513.71.12.001) - AGE AND
TOOLS DATA
ECS BLANKING DISC RIG (P/N 12-B-71-00-06-03A-066A-A 2017-07-19 ALL
513.21.12.050) - AGE AND TOOLS DA-
TA
ENGINE SLING (P/N 968.20.12.942) - 12-B-71-00-06-04A-066A-A 2017-07-19 ALL
AGE AND TOOLS DATA
COMPRESSOR WASH RIG FITTING 12-B-71-00-06-05A-066A-A N 2021-07-08 ALL
(P/N 513.71.21.007) - AGE AND
TOOLS DATA
TURBINE TEMPERATURE TEST SET 12-B-77-00-01-01A-066A-A 2017-07-19 ALL
(P/N 990.00.00.831) - AGE AND
TOOLS DATA
TURBINE TEMPERATURE TEST SET 12-B-77-00-01-01A-066B-A 2017-07-19 All
(P/N 990.00.00.859) - AGE AND
TOOLS DATA
PRESSURE CALIBRATOR (P/N 12-B-77-40-05-02A-066A-A 2017-07-19 ALL
990.00.00.839) - AGE AND TOOLS DA-
TA
PRESSURE CALIBRATOR (P/N 12-B-77-40-05-02A-066B-A 2017-07-19 ALL
990.00.00.858) - AGE AND TOOLS DA-
TA
OPERATING PROBE (P/N 12-B-79-00-01-01A-066A-A 2017-07-19 ALL
963.82.21.251) - AGE AND TOOLS DA-
TA
OIL FILTER REMOVAL CHUTE (P/N 12-B-79-20-03-01A-066A-A 2017-07-19 ALL
513.79.12.050) - AGE AND TOOLS DA-
TA
Effectivity: ALL 12-B-00-00-00-00D-002A-A
UNCLASSIFIED 2021-07-16 Page 11
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Document title Data module code Issue date Effectivity
OIL FILTER HOUSING PULLER (P/N 12-B-79-20-03-02A-066A-A 2017-07-19 ALL
968.20.11.906) - AGE AND TOOLS DA-
TA
OIL FILTER ELEMENT PULLER (P/N 12-B-79-20-03-03A-066A-A 2017-07-19 ALL
968.20.11.913) - AGE AND TOOLS DA-
TA
PRESSURE CALIBRATOR TEST SET 12-B-79-30-06-01A-066A-A 2017-07-19 ALL
(P/N 990.00.00.830) - AGE AND
TOOLS DATA
PRESSURE CALIBRATOR TEST SET 12-B-79-30-06-01A-066B-A 2017-07-19 ALL
(P/N 990.00.00.864) - AGE AND
TOOLS DATA
PARTICLE TEST TOOL (P/N 12-B-79-30-06-02A-066A-A 2017-07-19 ALL
990.00.00.139) - AGE AND TOOLS DA-
TA
Effectivity: ALL 12-B-00-00-00-00D-002A-A
End of data module
UNCLASSIFIED 2021-07-16 Page 12
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
PC-12/47E GENERAL - TOOL AND EQUIPMENT MANUAL
CHANGE HIGHLIGHTS - REVISION 20
Table of Contents Page
PC-12/47E GENERAL - TOOL AND EQUIPMENT MANUAL - CHANGE HIGHLIGHTS - 1
REVISION 20..............................................................................................................................
Index of Tables Page
1 References............................................................................................................. 1
References
Table 1 References
Data module/Technical publication Title
None
Description
DM Reference Action Change
12-B-00-00-00-00D-002A-A Replaced Updated for new revision
12-B-00-00-00-00D-003A-A Replaced Update for new revision
12-B-00-00-00-00A-060A-A Replaced 20596-6-2 - Alternative tool added to T30-005. 20856-4-1 - New
tools for 4-bladed propeller added: transport container T61-006,
support plate T61-008, and adapter T61-035. 20861-2-1 - New
tools for 5-bladed propeller added: transport container T61-040,
adapter T61-045, and spinner inlay T61-050. 20979-5-1 - New
tool T32-135 added. 20979-9-1 - New tool T45-006 added.
20979-9-3 - Tool T45-005 set to no longer available. 22073-4-4 -
Alternative tools added to T12-040. 22420-3-2 - Alternative tool
added to T05-010. 22688-1-1 - Alterantive tool added to
T21-041. 22708-1-1 - New tool T71-025 added. 22807-2-1 -
New tool T28-015 added.
12-B-05-00-00-00A-066C-A Inserted Incorporation of new data module
12-B-12-20-07-03A-066C-A Inserted Incorporation of new data module
12-B-12-20-07-03A-066D-A Inserted Incorporation of new data module
12-B-12-20-07-03A-066E-A Inserted Incorporation of new data module
12-B-21-40-17-05A-066B-A Inserted Incorporation of new data module
12-B-28-20-01-01A-066A-A Inserted Incorporation of new data module
12-B-28-40-10-01A-066A-A Replaced 21821-2-1 - Added effectivity; Editorial changes
12-B-28-40-10-01A-066B-A Replaced 21821-2-2 - Added effectivity; Editorial changes
12-B-28-40-10-01A-066C-A Replaced 21821-1-1 - Added effectivity; Editorial changes
Effectivity: 12-B-00-00-00-00D-003A-A
UNCLASSIFIED 2021-07-16 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
DM Reference Action Change
12-B-30-60-03-01A-066B-A Replaced 22262-2-1 - Data updated to include information about function
test; parts list added.
12-B-30-60-03-01A-066C-A Inserted Incorporation of new data module
12-B-45-00-01-00A-066A-A Replaced 20979-9-3 - Updated to include information about alternative
tool.
12-B-45-00-01-00A-066C-A Inserted Incorporation of new data module
12-B-45-45-01-00A-066E-A Replaced 22092-1-1 - Parts list updated; figure removed.
12-B-61-10-02-05A-066A-A Inserted Incorporation of new data module
12-B-61-10-02-05A-066B-A Inserted Incorporation of new data module
12-B-61-10-02-06A-066A-A Inserted Incorporation of new data module
12-B-61-10-02-06A-066B-A Inserted Incorporation of new data module
12-B-61-10-02-07A-066A-A Inserted Incorporation of new data module
12-B-61-10-02-08A-066A-A Inserted Incorporation of new data module
12-B-71-00-06-05A-066A-A Inserted Incorporation of new data module
Effectivity: 12-B-00-00-00-00D-003A-A
End of data module
UNCLASSIFIED 2021-07-16 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
TEM LIST OF REVISIONS
1 List of Revisions
Rev No. Date of Issue Date Inserted Signature
Effectivity: ALL 12-B-00-00-00-00A-004C-A
UNCLASSIFIED 2018-11-29 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Rev No. Date of Issue Date Inserted Signature
Effectivity: ALL 12-B-00-00-00-00A-004C-A
End of data module
UNCLASSIFIED 2018-11-29 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
TEM LIST OF TEMPORARY REVISIONS
1 List of Temporary Revisions
Temp Rev No. Date of Issue Date Inserted Signature Date Removed Signature
Effectivity: ALL 12-B-00-00-00-00A-006C-A
End of data module
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-00-00-00-00A-006C-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
GENERAL
TEM INTRODUCTION
Table of Contents Page
GENERAL - TEM INTRODUCTION........................................................................................... 1
1 General................................................................................................................... 1
2 Effectivity................................................................................................................ 2
3 Copyright and Legal Statement.............................................................................. 2
4 Publication Revisions............................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
References
Table 1 References
Data module/Technical publication Title
None
Description
1 General
This Tool and Equipment Manual (TEM), Document No. 02306 is part of the Interactive Electronic Technical
Publication (IETP). For MSN 545, 1001–1719, 1721–1999, refer to Document No. 02307. For MSN 1720, 2001-UP,
refer to Document No. 02449. The IETP is published on a DVD or downloaded from the Pilatus website.
The TEM uses S1000D specification and is assembled as Data Modules (DM).
The TEM gives information on the tools and equipment needed to operate and maintain the PC12/47E aircraft in
service. Each piece of equipment is described and illustrated, where necessary, so that the user can understand its
purpose and use.
The tools listed in the TEM are the tools Pilatus recommends to complete the maintenance tasks on the aircraft.
Equivalent tools to those recommended by Pilatus may be used for all of those items not marked with an asterisk. If
equivalent tools are used, it is the responsibility of the maintainer to ensure that the maintenance tasks can be
accomplished according to the applicable Aircraft Maintenance Manual (AMM) and that the equivalent tools are
acceptable to the applicable regulatory authority.
The TEM does not give the special tools and equipment needed to overhaul vendor items. This information is given
in the vendor Component Maintenance Manuals (CMM).
Effectivity: ALL 12-B-00-00-00-00A-018C-A
UNCLASSIFIED 2019-11-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
2 Effectivity
Effectivity statements are used to identify the applicability to which the data applies. Effectivity is related to the
aircraft model and the MSN range. The aircraft model and MSN range are identified on the Title Page of the
publication.
3 Copyright and Legal Statement
© Pilatus Aircraft Ltd. This document contains proprietary information that is protected by copyright. All rights are
reserved. No part of this document may be copied, reproduced or translated to other languages without the prior
written consent of Pilatus Aircraft Ltd.
In connection with the use of this document, Pilatus does not provide any express or implied warranties and
expressly disclaims any warranty of merchantability or fitness for a particular purpose. This document contains
trade secrets, confidential and/or proprietary information of Pilatus and technical data subject to export control laws
and regulations, including the U.S. Export Administration Regulations (EAR). Disclosure or distribution of this
document contrary to the EAR, and other laws and regulations, is strictly forbidden. The above restrictions may
apply to data on all pages of this document.
4 Publication Revisions
Revisions to the IETP, correct, change and add new information. A revision is issued as a new replacement DVD or
downloaded from:
www.pilatus-aircraft.com -> MyPilatus Customer Portal
If a replacement DVD is issued, the DVD label will identify the revision number. All previously issued DVDs should
be destroyed.
The Change Highlights data module gives a brief summary of the changes. Changed information is shown on a
colored background by the IETP viewing software.
Temporary revisions are created for important change information and issued between revision intervals.
Temporary revisions are issued on yellow paper or downloaded from:
www.pilatus-aircraft.com -> MyPilatus Customer Portal
Temporary revisions must be made available to the maintenance personnel when using the IETP.
Effectivity: ALL 12-B-00-00-00-00A-018C-A
End of data module
UNCLASSIFIED 2019-11-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
GENERAL
LIST OF AEROSPACE GROUND EQUIPMENT (AGE) AND TOOLS
Table of Contents Page
GENERAL - LIST OF AEROSPACE GROUND EQUIPMENT (AGE) AND TOOLS................... 1
1 Chapter 0 - General Maintenance.......................................................................... 12
2 Chapter 5 - Scheduled/Unscheduled Servicing...................................................... 12
3 Chapter 7 - Lifting and Shoring............................................................................... 13
4 Chapter 8 - Leveling and Weighing........................................................................ 13
5 Chapter 9 - Handling and Taxiing........................................................................... 13
6 Chapter 10 - Parking, Mooring and Storing............................................................ 13
7 Chapter 12 - Servicing............................................................................................ 14
8 Chapter 20 - Standard Practices - Airframe Systems............................................. 14
9 Chapter 21 - Environmental Control....................................................................... 14
10 Chapter 22 - Auto Flight......................................................................................... 15
11 Chapter 23 - Communications................................................................................ 15
12 Chapter 24 - Electrical Power................................................................................. 16
13 Chapter 25 - Equipment/Furnishings...................................................................... 16
14 Chapter 26 - Fire Protection................................................................................... 16
15 Chapter 27 - Flight Controls................................................................................... 16
16 Chapter 28 - Fuel.................................................................................................... 17
17 Chapter 29 - Hydraulic Power (MSN 1001-1299, 1301-1450)................................ 17
18 Chapter 30 - Ice and Rain Protection..................................................................... 17
19 Chapter 31 - Indicating/Recording Systems........................................................... 17
20 Chapter 32 - Landing Gear..................................................................................... 18
21 Chapter 33 - Lights................................................................................................. 18
22 Chapter 34 - Navigation.......................................................................................... 19
23 Chapter 35 - Oxygen.............................................................................................. 19
24 Chapter 45 - Central Maintenance System (CMS)................................................. 19
25 Chapter 46 - Systems Integration and Display....................................................... 20
26 Chapter 51 - Standard Practices - Structures......................................................... 20
27 Chapter 52 - Doors................................................................................................. 20
28 Chapter 53 - Fuselage............................................................................................ 20
29 Chapter 54 - Nacelles/Pylons................................................................................. 20
30 Chapter 55 - Stabilizers.......................................................................................... 21
31 Chapter 56 - Windows............................................................................................ 21
32 Chapter 57 - Wings................................................................................................. 21
33 Chapter 60 - Standard Practices - Propeller........................................................... 21
34 Chapter 61 - Propeller............................................................................................ 21
35 Chapter 70 - Standard Practices - Engine.............................................................. 22
36 Chapter 71 - Power Plant....................................................................................... 22
37 Chapter 72 - Engine............................................................................................... 22
38 Chapter 73 - Engine Fuel and Control.................................................................... 23
39 Chapter 74 - Ignition............................................................................................... 23
40 Chapter 76 - Engine Controls................................................................................. 23
41 Chapter 77 - Engine Indicating............................................................................... 23
42 Chapter 78 - Exhaust.............................................................................................. 23
Effectivity: ALL 12-B-00-00-00-00A-060A-A
UNCLASSIFIED 2021-07-08 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
43 Chapter 79 - Oil...................................................................................................... 23
44 Chapter 80 - Starting.............................................................................................. 24
Index of Tables Page
1 References............................................................................................................. 3
2 List of chapters....................................................................................................... 11
3 List of AGE, tools and Tool Numbers for Chapter 0 - General maintenance.......... 12
4 List of AGE, tools and Tool Numbers for Chapter 5 - Scheduled/unscheduled 12
servicing.................................................................................................................
5 List of AGE, tools and Tool Numbers for Chapter 7 - Lifting and Shoring.............. 13
6 List of AGE, tools and Tool Numbers for Chapter 8 - Leveling and weighing......... 13
7 List of AGE, tools and Tool Numbers for Chapter 9 - Handling and taxiing............ 13
8 List of AGE, tools and Tool Numbers for Chapter 10 - Parking, mooring and 13
storing.....................................................................................................................
9 List of AGE, tools and Tool Numbers for Chapter 12 - Servicing............................ 14
10 List of AGE, tools and Tool Numbers for Chapter 20 - Standard practices - 14
Airframe systems....................................................................................................
11 List of AGE, tools and Tool Numbers for Chapter 21 - Environmental control........ 14
12 List of AGE, tools and Tool Numbers for Chapter 22 - Auto Flight......................... 15
13 List of AGE, tools and Tool Numbers for Chapter 23 - Communications................ 15
14 List of AGE, tools and Tool Numbers for Chapter 24 - Electrical power................. 16
15 List of AGE, tools and Tool Numbers for Chapter 25 - Equipment/furnishings....... 16
16 List of AGE, tools and Tool Numbers for Chapter 26 - Fire protection................... 16
17 List of AGE, tools and Tool Numbers for Chapter 27 - Flight controls.................... 16
18 List of AGE, tools and Tool Numbers for Chapter 28 - Fuel................................... 17
19 List of AGE, tools and Tool Numbers for Chapter 29 - Hydraulic power................. 17
20 List of AGE, tools and Tool Numbers for Chapter 30 - Ice and rain protection....... 17
21 List of AGE, tools and Tool Numbers for Chapter 31 - Indicating/recording 17
systems..................................................................................................................
22 List of AGE, tools and Tool Numbers for Chapter 32 - Landing gear..................... 18
23 List of AGE, tools and Tool Numbers for Chapter 33 - Lights................................. 18
24 List of AGE, tools and Tool Numbers for Chapter 34 - Navigation......................... 19
25 List of AGE, tools and Tool Numbers for Chapter 35 - Oxygen.............................. 19
26 List of AGE, tools and Tool Numbers for Chapter 45 - Central Maintenance 19
System (CMS)........................................................................................................
27 List of AGE, tools and Tool Numbers for Chapter 46 - Systems integration and 20
display....................................................................................................................
28 List of AGE, tools and Tool Numbers for Chapter 51 - Standard practices - 20
Structure.................................................................................................................
29 List of AGE, tools and Tool Numbers for Chapter 52 - Doors................................. 20
30 List of AGE, tools and Tool Numbers for Chapter 53 - Fuselage............................ 20
31 List of AGE, tools and Tool Numbers for Chapter 54 - Nacelles/pylons................. 20
32 List of AGE, tools and Tool Numbers for Chapter 55 - Stabilizers.......................... 21
33 List of AGE, tools and Tool Numbers for Chapter 56 - Windows............................ 21
34 List of AGE, tools and Tool Numbers for Chapter 57 - Wings................................ 21
35 List of AGE, tools and Tool Numbers for Chapter 60 - Standard practices - 21
Propeller.................................................................................................................
36 List of AGE, tools and Tool Numbers for Chapter 61 - Propeller............................ 21
37 List of AGE, tools and Tool Numbers for Chapter 70 - Engine............................... 22
38 List of AGE, tools and Tool Numbers for Chapter 71 - Power plant....................... 22
39 List of AGE, tools and Tool Numbers for Chapter 72 - Engine............................... 22
40 List of AGE, tools and Tool Numbers for Chapter 73 - Engine fuel and control...... 23
Effectivity: ALL 12-B-00-00-00-00A-060A-A
UNCLASSIFIED 2021-07-08 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
41 List of AGE, tools and Tool Numbers for Chapter 74 - Ignition............................... 23
42 List of AGE, tools and Tool Numbers for Chapter 76 - Engine controls.................. 23
43 List of AGE, tools and Tool Numbers for Chapter 77 - Engine indicating............... 23
44 List of AGE, tools and Tool Numbers for Chapter 78 - Exhaust............................. 23
45 List of AGE, tools and Tool Numbers for Chapter 79 - Oil...................................... 23
46 List of AGE, tools and Tool Numbers for Chapter 80 - Starting.............................. 24
References
Table 1 References
Data module/Technical publication Title
12-B-00-00-00-00A-018C-A INTRODUCTION
12-B-05-00-00-00A-066A-A VIDEO BORESCOPE (P/N 990.00.00.254) - AGE AND
TOOLS DATA
12-B-05-00-00-00A-066B-A VIDEO BORESCOPE (P/N 990.00.00.263) - AGE AND
TOOLS DATA
12-B-05-00-00-00A-066C-A VIDEO BORESCOPE (P/N 990.00.00.278) - AGE AND
TOOLS DATA
12-B-07-10-02-01A-066A-A HYDRAULIC JACK (P/N 968.85.81.230) – AGE AND TOOLS
DATA
12-B-07-10-02-02A-066A-A JACKING ADAPTOR KIT (P/N 968.85.81.233) – AGE AND
TOOLS DATA
12-B-07-10-02-03A-066A-A HYDRAULIC JACK (P/N 968.85.81.214) - AGE AND TOOLS
DATA
12-B-07-10-02-05A-066A-A AXLE JACK (P/N 968.85.81.218) – AGE AND TOOLS DATA
12-B-07-10-02-06A-066A-A NOSE WHEEL JACKING ADAPTOR (P/N 507.20.12.052) –
AGE AND TOOLS DATA
12-B-07-10-02-07A-066A-A MAIN WHEEL JACKING ADAPTOR (P/N 507.20.12.051) –
AGE AND TOOLS DATA
12-B-07-10-02-08A-066A-A NWS LOCKING SCREW (P/N 513.32.12.050) – AGE AND
TOOLS DATA
12-B-08-10-01-00A-066A-A AIRCRAFT WEIGHING SYSTEM (P/N 990.00.02.155) - AGE
AND TOOLS DATA
12-B-08-10-01-00A-066B-A AIRCRAFT WEIGHING SYSTEM (P/N 990.00.02.157) - AGE
AND TOOLS DATA
12-B-08-10-01-00A-066C-A AIRCRAFT WEIGHING SYSTEM (P/N 990.00.02.167) - AGE
AND TOOLS DATA
12-B-08-10-01-00A-066D-A AIRCRAFT WEIGHING SYSTEM (P/N 990.00.02.185) - AGE
AND TOOLS DATA
12-B-08-20-01-00A-066A-A INCLINOMETER (P/N 903.70.32.410) – AGE AND TOOLS
DATA
12-B-09-10-01-01A-066A-A MULTIHEAD TOWBAR (P/N 990.00.00.904) – AGE AND
TOOLS DATA
Effectivity: ALL 12-B-00-00-00-00A-060A-A
UNCLASSIFIED 2021-07-08 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Data module/Technical publication Title
12-B-09-10-01-02A-066A-A HEAD ATTACHMENT (P/N 990.00.00.907) – AGE AND
TOOLS DATA
12-B-09-10-01-02A-066B-A HEAD ATTACHMENT (P/N 990.00.00.943) - AGE AND
TOOLS DATA
12-B-10-10-02-01A-066A-A COCKPIT SUN SCREENS (P/N 990.00.00.881) – AGE AND
TOOLS DATA
12-B-10-10-02-03A-066A-A WHEEL CHOCK SET (P/N 990.00.00.909) – AGE AND
TOOLS DATA
12-B-12-10-06-01A-066A-A TIRE/STRUT SERVICE GAGE (P/N 903.70.32.911) – AGE
AND TOOLS DATA
12-B-12-10-06-02A-066A-A OXYGEN TROLLEY (P/N 990.00.00.601) – AGE AND TOOLS
DATA
12-B-12-10-06-03A-066A-A OXYGEN ADAPTOR (P/N 990.00.00.604) – AGE AND TOOLS
DATA
12-B-12-10-06-04A-066A-A FUEL SAMPLE UNIT (P/N 990.00.00.908) – AGE AND
TOOLS DATA
12-B-12-10-06-05A-066A-A NITROGEN CART WITH BOOSTER (P/N 990.00.00.702) –
AGE AND TOOLS DATA
12-B-12-20-01-00A-066A-A STATIC PORT COVER (P/N 990.00.00.167)
12-B-12-20-07-01A-066A-A CIRCUIT BREAKER SAFETY CLIP (P/N 110.88.07.065) –
AGE AND TOOLS DATA
12-B-12-20-07-02A-066A-A COMPRESSION SPRAYER (P/N 968.86.93.124) – AGE AND
TOOLS DATA
12-B-12-20-07-03A-066A-A GREASE GUN (P/N 904.21.02.103) – AGE AND TOOLS DA-
TA
12-B-12-20-07-03A-066B-A GREASE GUN (P/N 904.21.02.104) - AGE AND TOOLS DATA
12-B-12-20-07-03A-066C-A GREASE GUN (P/N 904.21.02.102) - AGE AND TOOLS DATA
12-B-12-20-07-03A-066D-A GREASE GUN (P/N 904.21.02.702) - AGE AND TOOLS DATA
12-B-12-20-07-03A-066E-A GREASE GUN (P/N 904.21.02.110) - AGE AND TOOLS DATA
12-B-20-40-01-01A-066A-A CORROSION TREATMENT EQUIPMENT PUMP (P/N
904.21.06.622) – AGE AND TOOLS DATA
12-B-20-40-01-02A-066A-A CORROSION TREATMENT EQUIPMENT PRESSURE CUP
(P/N 904.21.06.623) – AGE AND TOOLS DATA
12-B-21-30-30-00A-066A-A CABIN PRESSURIZATION UNIT (P/N 990.00.00.660) - AGE
AND TOOLS DATA
12-B-21-30-30-01A-066A-A CABIN PRESSURIZATION UNIT (P/N 990.00.00.661) - AGE
AND TOOLS DATA
12-B-21-30-30-02A-066A-A CABIN PRESSURIZATION UNIT (P/N 990.00.00.663) - AGE
AND TOOLS DATA
12-B-21-30-30-03A-066A-A ADAPTER KIT – CABIN PRESSURIZATION UNIT P/N
990.00.00.662) - AGE AND TOOLS DATA
Effectivity: ALL 12-B-00-00-00-00A-060A-A
UNCLASSIFIED 2021-07-08 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Data module/Technical publication Title
12-B-21-40-17-02A-066A-A QUICK CAL (P/N 990.00.00.818) – AGE AND TOOLS DATA
12-B-21-40-17-03A-066A-A QUICK CAL (P/N 990.00.00.819) – AGE AND TOOLS DATA
12-B-21-40-17-05A-066A-A SPECIAL INSERT (P/N 513.21.21.002) – AGE AND TOOLS
DATA
12-B-21-40-17-05A-066B-A SPECIAL INSERT (P/N 513.21.21.007) – AGE AND TOOLS
DATA
12-B-21-50-04-02A-066A-A AIR CONDITIONING SERVICE STATION (P/N 990.00.09.216)
– AGE AND TOOLS DATA
12-B-21-50-04-02A-066B-A AIR CONDITIONING SERVICE STATION 220–240 VOLTS
(P/N 990.00.09.207) - AGE AND TOOLS DATA
12-B-21-50-04-02A-066C-A AIR CONDITIONING SERVICE STATION 110 VOLT (P/N
990.00.09.206) - AGE AND TOOLS DATA
12-B-21-50-04-03A-066A-A SERVICE KIT (P/N 990.00.09.213) – AGE AND TOOLS DATA
12-B-21-50-04-04A-066A-A UV LEAK DETECTION LIGHT (P/N 990.00.09.263) - AGE
AND TOOLS DATA
12-B-22-10-08-01A-066A-A ADAPTOR (P/N 985.92.03.903) - AGE AND TOOLS DATA
12-B-22-10-08-02A-066A-A CLUTCH PLATE (P/N 985.92.03.902) – AGE AND TOOLS DA-
TA
12-B-22-20-07-00A-066A-A KIT, INDICATOR AOA RIGGING GAUGE
12-B-22-20-07-01A-066A-A AOA CALIBRATION TOOL, LH (P/N 513.22.12.055) – AGE
AND TOOLS DATA
12-B-22-20-07-02A-066A-A AOA CALIBRATION TOOL, RH (P/N 513.22.12.056) – AGE
AND TOOLS DATA
12-B-22-20-07-03A-066A-A TORQUE SIMULATOR (P/N 513.22.12.001) – AGE AND
TOOLS DATA
12-B-22-20-07-03A-066B-A TORQUE SIMULATOR
12-B-23-11-05-01A-066A-A ANTENNA RELEASE TOOL (P/N 110.85.07.347) – AGE AND
TOOLS DATA
12-B-23-11-05-02A-066A-A SPRING BALANCE (P/N 110.85.07.251) – AGE AND TOOLS
DATA
12-B-23-11-05-02A-066B-A SPRING BALANCE (P/N 903.70.32.818) - AGE AND TOOLS
DATA
12-B-23-16-01-00A-066A-A SATCOM MAINTENANCE CABLE (P/N 985.83.14.226) - AGE
AND TOOLS DATA
12-B-23-16-01-00A-066B-A SATCOM MAINTENANCE CABLE (P/N 985.99.99.634) - AGE
AND TOOLS DATA
12-B-24-00-01-01A-066A-A BATTERY CHARGER/ANALYZER (P/N 110.85.07.410) – AGE
AND TOOLS DATA
12-B-24-00-01-02A-066A-A STARTER/GEN QAD ADAPTOR WRENCH SOCKET (P/N
513.24.09.025) – AGE AND TOOLS DATA
Effectivity: ALL 12-B-00-00-00-00A-060A-A
UNCLASSIFIED 2021-07-08 Page 5
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Data module/Technical publication Title
12-B-25-63-01-00A-066A-A SARSAT BEACON TESTER (P/N 990.00.00.211) - AGE AND
TOOLS DATA
12-B-25-63-01-00A-066B-A SARSAT BEACON TESTER (P/N 990.00.00.215) - AGE AND
TOOLS DATA
12-B-25-63-04-00A-066A-A ULTRASONIC TEST SET (TS500)
12-B-27-00-00-00A-066A-A TURNBUCKLE FIX TOOL (P/N 513.27.24.258) – AGE AND
TOOLS DATA
12-B-27-10-03-01A-066A-A RIGGING PIN (P/N 110.85.07.050) – AGE AND TOOLS DATA
12-B-27-10-03-02A-066A-A TENSIOMETER (P/N 110.85.07.242) – AGE AND TOOLS DA-
TA
12-B-27-10-03-02A-066B-A TENSIOMETER (P/N 903.70.31.504) – AGE AND TOOLS DA-
TA
12-B-27-10-03-03A-066A-A RIGGING PIN (P/N 110.85.07.252) – AGE AND TOOLS DATA
12-B-27-10-03-04A-066A-A RIGGING PIN (P/N 513.27.12.050) – AGE AND TOOLS DATA
12-B-27-10-03-05A-066B-A RIGGING BLOCK ASSEMBLY (P/N 513.27.12.075) – AGE
AND TOOLS DATA
12-B-27-20-03-01A-066A-A RUDDER BALANCING ADAPTOR (P/N 513.27.12.051) – AGE
AND TOOLS DATA
12-B-27-30-03-01A-066A-A RIGGING PIN (P/N 513.27.72.001) – AGE AND TOOLS DATA
12-B-27-50-10-02A-066B-A FCWU MAINTENANCE UTILITY DISC (P/N 513.27.12.001) –
AGE AND TOOLS DATA
12-B-27-50-10-02A-066C-A FCWU MAINTENANCE UTILITY DISC (P/N 513.27.12.002) –
AGE AND TOOLS DATA
12-B-27-50-10-03A-066A-A GREASE GUN (P/N 904.21.01.103) – AGE AND TOOLS DA-
TA
12-B-27-50-10-04A-066A-A TEMPLATE (P/N 513.27.12.066) – AGE AND TOOLS DATA
12-B-27-50-10-06A-066A-A BACKLASH MEASURING TOOL (P/N 978.73.20.902) – AGE
AND TOOLS DATA
12-B-28-40-10-01A-066A-A SIMPLIFIED SCI READER SOFTWARE (P/N 513.28.12.001) -
AGE AND TOOLS DATA
12-B-28-40-10-01A-066B-A SIMPLIFIED SCI READER SOFTWARE (P/N 513.28.12.002)
12-B-28-40-10-01A-066C-A SIMPLIFIED SCI READER SOFTWARE (P/N 513.28.12.003)
12-B-28-40-10-02A-066A-A SCI INTERFACE USB CABLE (P/N 990.00.00.856) - AGE
AND TOOLS DATA
12-B-30-60-03-01A-066B-A OAT SIMULATOR (P/N 513.30.12.004) - AGE AND TOOLS
DATA
12-B-30-60-03-01A-066C-A OAT SIMULATOR (P/N 513.30.12.007) - AGE AND TOOLS
DATA
12-B-30-60-04-01A-066A-A PROPELLER DE-ICE TEST SET (P/N 985.99.99.631)
12-B-31-30-10-00A-066A-A FRED FILE (P/N 531.30.12.023) - AGE AND TOOLS DATA
Effectivity: ALL 12-B-00-00-00-00A-060A-A
UNCLASSIFIED 2021-07-08 Page 6
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Data module/Technical publication Title
12-B-31-30-10-00A-066B-A FRED FILE (P/N 531.30.12.027) - AGE AND TOOLS DATA
12-B-31-30-10-00A-066C-A FRED FILE (P/N 531.30.12.029) - AGE AND TOOLS DATA
12-B-31-30-10-00A-066D-A FRED FILE (P/N 531.30.12.032) - AGE AND TOOLS DATA
12-B-31-30-10-01A-066A-A CVFDR AND ACMS DATA ANALYSIS TOOLS (P/N
513.31.12.002) - AGE AND TOOLS DATA
12-B-31-30-10-01A-066B-A ACMS AND LDR DATA ANALYSIS DISC (P/N 513.31.12.003)
- AGE AND TOOLS DATA
12-B-32-00-01-01A-066A-A HYDRAULIC BEADBREAKER (P/N 990.00.02.101) – AGE
AND TOOLS DATA
12-B-32-00-01-02A-066A-A TIRE RING 9 INCH (P/N 990.00.02.107) – AGE AND TOOLS
DATA
12-B-32-00-01-03A-066A-A TIRE RING 13 INCH (P/N 990.00.02.105) – AGE AND TOOLS
DATA
12-B-32-10-04-01A-066A-A ADJUSTMENT TOOL (P/N 513.32.12.057) – AGE AND
TOOLS DATA
12-B-32-10-04-02A-066A-A NITROGEN TROLLEY (P/N 990.00.00.701) – AGE AND
TOOLS DATA
12-B-32-10-04-03A-066A-A PROXIMITY SWITCH TEST BOX (P/N 985.99.99.602) – AGE
AND TOOLS DATA
12-B-32-10-04-04A-066A-A LANDING GEAR TOOL KIT (P/N 513.32.12.002) – AGE AND
TOOLS DATA
12-B-32-20-07-01A-066A-A DIGITAL FORCE GAGE (P/N 903.70.32.921) – AGE AND
TOOLS DATA
12-B-32-20-07-01A-066B-A DIGITAL FORCE GAGE P/N 903.70.32.924 - AGE AND
TOOLS DATA
12-B-32-20-07-02A-066A-A FORK (P/N 513.32.12.047) – AGE AND TOOLS DATA
12-B-32-20-07-03A-066A-A COMPRESSION TOOL (P/N 513.32.12.052) – AGE AND
TOOLS DATA
12-B-32-30-06-01A-066A-A TORQUE WRENCH ADAPTOR (P/N 904.10.89.227) – AGE
AND TOOLS DATA
12-B-32-30-06-02A-066A-A WRENCH (P/N 904.10.08.228) – AGE AND TOOLS DATA
12-B-32-30-06-05A-066A-A TEST BOX (P/N 513.32.12.023) – AGE AND TOOLS DATA
12-B-32-40-07-01A-066A-A BRAKE BLEEDING RIG (P/N 990.00.00.160) – AGE AND
TOOLS DATA
12-B-32-40-07-02A-066A-A BRAKE BLEEDING ADAPTOR KIT (P/N 990.00.00.161) –
AGE AND TOOLS DATA
12-B-32-40-07-03A-066A-A SOCKET (P/N 904.10.62.141) – AGE AND TOOLS DATA
12-B-32-40-07-04A-066A-A SOCKET (P/N 904.10.62.131) – AGE AND TOOLS DATA
12-B-32-40-07-05A-066A-A WRENCH (P/N 904.10.00.038) – AGE AND TOOLS DATA
Effectivity: ALL 12-B-00-00-00-00A-060A-A
UNCLASSIFIED 2021-07-08 Page 7
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Data module/Technical publication Title
12-B-32-40-07-06A-066A-A TORQUE WRENCH (P/N 904.10.89.120) – AGE AND TOOLS
DATA
12-B-32-40-07-06A-066B-A TORQUE WRENCH (P/N 904.10.89.142) – AGE AND TOOLS
DATA
12-B-32-40-07-08A-066A-A TORQUE WRENCH ADAPTOR (P/N 904.10.89.186) – AGE
AND TOOLS DATA
12-B-32-40-07-08A-066B-A TORQUE WRENCH ADAPTOR (P/N 513.32.12.117) – AGE
AND TOOLS DATA
12-B-32-40-07-09A-066A-A WHEEL BALANCER (P/N 990.00.02.109) – AGE AND TOOLS
DATA
12-B-32-50-01-00A-066A-A SHIMMY DAMPER LEVEL GAUGE ASSEMBLY (P/N
513.32.12.132) - AGE AND TOOLS DATA
12-B-32-60-05-00A-066A-A MLG FOLDING STRUT GAGE (P/N 513.32.12.114) - AGE
AND TOOLS DATA
12-B-32-60-10-00A-066A-A AIRCRAFT ADAPTOR CABLE (P/N 985.99.99.615) – AGE
AND TOOLS DATA
12-B-32-60-10-00A-066B-A PROXIMITY SWITCH ADAPTOR CABLE (P/N 985.99.99.616)
– AGE AND TOOLS DATA
12-B-33-00-01-00A-066A-A SAFETY GLASSES - AGE AND TOOLS DATA
12-B-34-11-30-01A-066A-A PITOT TEST ADAPTOR (P/N 990.00.00.206) – AGE AND
TOOLS DATA
12-B-34-11-30-03A-066A-A STATIC TEST ADAPTOR (P/N 990.00.00.208) – AGE AND
TOOLS DATA
12-B-34-11-30-04A-066A-A STATIC BLANKING ADAPTOR (P/N 990.00.00.209) – AGE
AND TOOLS DATA
12-B-34-11-30-05A-066A-A AIR DATA TEST SET (P/N 990.00.00.225) – AGE AND
TOOLS DATA
12-B-34-11-30-05A-066B-A AIR DATA TEST SET (P/N 990.00.00.240) – AGE AND
TOOLS DATA
12-B-34-11-30-05A-066C-A AIR DATA TEST SET ADVANCED HAND TERMINAL (P/N
990.00.00.241) – AGE AND TOOLS DATA
12-B-34-11-30-05A-066D-A AIR DATA TEST SET (P/N 990.00.00.257)
12-B-34-11-30-10A-066A-A DIAL INDICATOR (P/N 903.70.14.807) - AGE AND TOOLS
DATA
12-B-34-11-30-15A-066A-A MOUNTING BLOCK (P/N 513.34.12.010) - AGE AND TOOLS
DATA
12-B-34-21-02-02A-066A-A COMPASS SWING TROLLEY (P/N 513.34.09.019) – AGE
AND TOOLS DATA
12-B-34-21-02-02A-066B-A COMPASS SWING TROLLEY (P/N 513.34.09.029) - AGE
AND TOOLS DATA
Effectivity: ALL 12-B-00-00-00-00A-060A-A
UNCLASSIFIED 2021-07-08 Page 8
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Data module/Technical publication Title
12-B-34-57-05-02A-066A-A SUB–D CABLE (P/N 990.00.01.201) - AGE AND TOOLS DA-
TA
12-B-35-10-03-01A-066A-A WRENCH, OXYGEN ADAPTOR, COCKPIT (P/N
513.35.12.050) – AGE AND TOOLS DATA
12-B-35-20-05-01A-066A-A WRENCH – OXYGEN ADAPTOR, CABIN (P/N 513.35.12.051)
– AGE AND TOOLS DATA
12-B-45-00-01-00A-066A-A MAINTENANCE TEST BOX (P/N 985.99.99.610) - AGE AND
TOOLS DATA
12-B-45-00-01-00A-066B-A MAINTENANCE TEST BOX (P/N 985.99.99.638) - AGE AND
TOOLS DATA
12-B-45-00-01-00A-066C-A MAINTENANCE BOX UPGRADE KIT (P/N 985.99.99.636) -
AGE AND TOOLS DATA
12-B-45-45-00-00A-066A-A LAPTOP COMPUTER - AGE AND TOOLS DATA
12-B-45-45-01-00A-066A-A LAN KIT LTEPIC–25 - AGE AND TOOLS DATA
12-B-45-45-01-00A-066B-A LAN KIT LANTAP–10 (P/N 990.00.01.203) - AGE AND TOOLS
DATA
12-B-45-45-01-00A-066C-A LAN KIT (P/N 990.00.01.208) - AGE AND TOOLS DATA
12-B-45-45-01-00A-066D-A LAN KIT 10MBIT (P/N 990.00.01.209) - AGE AND TOOLS DA-
TA
12-B-45-45-01-00A-066E-A USB LAN KIT 100MBIT (P/N 990.00.01.210) - AGE AND
TOOLS DATA
12-B-46-21-00-00A-066A-A APPLE iPAD - AGE AND TOOLS DATA
12-B-51-00-00-00A-066A-A EDDY CURRENT TEST DEVICE (P/N 990.00.02.181)
12-B-52-30-10-01A-066A-A ADJUSTMENT KIT (P/N 513.52.12.010) - AGE AND TOOLS
DATA
12-B-57-00-04-01A-066A-A PLUG WING/FUSELAGE SPANNER SET (P/N 513.24.12.001)
– AGE AND TOOLS DATA
12-B-57-00-04-02A-066A-A WING REMOVAL/INSTALLATION KIT (P/N 513.57.12.001) –
AGE AND TOOLS DATA
12-B-57-00-04-03A-066A-A MEASURING TOOL KIT (P/N 513.57.12.003) - AGE AND
TOOLS DATA
12-B-57-00-04-04A-066A-A BUSH REMOVAL/INSTALLATION KIT (P/N 513.57.12.004) -
AGE AND TOOLS DATA
12-B-57-00-04-05A-066A-A WING REMOVAL/INSTALLATION KIT (P/N 513.57.12.055)
12-B-61-00-01-01A-066A-A DYNAMIC BALANCING EQUIPMENT (P/N 513.61.12.002) –
AGE AND TOOLS DATA
12-B-61-00-01-01A-066B-A DYNAMIC BALANCING EQUIPMENT (P/N 968.29.12.989) –
AGE AND TOOLS DATA
12-B-61-00-01-02A-066A-A DYNAMIC BALANCING ADAPTOR KIT (P/N 513.61.12.061) –
AGE AND TOOLS DATA
Effectivity: ALL 12-B-00-00-00-00A-060A-A
UNCLASSIFIED 2021-07-08 Page 9
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Data module/Technical publication Title
12-B-61-10-02-01A-066A-A TORQUE WRENCH SET (P/N 904.10.89.136) – AGE AND
TOOLS DATA
12-B-61-10-02-01A-066B-A TORQUE WRENCH SET (P/N 904.10.89.139) – AGE AND
TOOLS DATA
12-B-61-10-02-02A-066A-A SPECIAL SOCKET (P/N 513.61.12.053) – AGE AND TOOLS
DATA
12-B-61-10-02-03A-066A-A STAND (P/N 513.61.12.050) – AGE AND TOOLS DATA
12-B-61-10-02-04A-066A-A BETA SYSTEM PULLER (P/N 990.00.00.906) – AGE AND
TOOLS DATA
12-B-61-10-02-05A-066A-A TRANSPORT CONTAINER (P/N 906.08.11.472) - AGE AND
TOOLS DATA
12-B-61-10-02-05A-066B-A TRANSPORT CONTAINER (P/N 906.08.11.490) - AGE AND
TOOLS DATA
12-B-61-10-02-06A-066A-A ADAPTER ASSEMBLY (P/N 513.61.12.015) - AGE AND
TOOLS DATA
12-B-61-10-02-06A-066B-A ADAPTER ASSEMBLY (P/N 513.61.12.013) - AGE AND
TOOLS DATA
12-B-61-10-02-07A-066A-A SUPPORT PLATE ASSEMBLY (P/N 513.61.21.014) - AGE
AND TOOLS DATA
12-B-61-10-02-08A-066A-A SPINNER INLAY (P/N 990.00.02.051) - AGE AND TOOLS DA-
TA
12-B-71-00-06-01A-066A-A NLG STRUT COLLAR (P/N 513.71.12.002) – AGE AND
TOOLS DATA
12-B-71-00-06-02A-066A-A ENGINE COMPRESSOR WASH RIG (P/N 513.71.12.001) –
AGE AND TOOLS DATA
12-B-71-00-06-03A-066A-A ECS BLANKING DISC RIG (P/N 513.21.12.050) – AGE AND
TOOLS DATA
12-B-71-00-06-04A-066A-A ENGINE SLING (P/N 968.20.12.942) – AGE AND TOOLS DA-
TA
12-B-71-00-06-05A-066A-A COMPRESSOR WASH RIG FITTING (P/N 513.71.21.007) –
AGE AND TOOLS DATA
12-B-77-00-01-01A-066A-A TURBINE TEMPERATURE TEST SET (P/N 990.00.00.831) –
AGE AND TOOLS DATA
12-B-77-00-01-01A-066B-A TURBINE TEMPERATURE TEST SET (P/N 990.00.00.859) -
AGE AND TOOLS DATA
12-B-77-40-05-02A-066A-A PRESSURE CALIBRATOR (P/N 990.00.00.839) - AGE AND
TOOLS DATA
12-B-77-40-05-02A-066B-A PRESSURE CALIBRATOR (P/N 990.00.00.858) - AGE AND
TOOLS DATA
12-B-79-00-01-01A-066A-A OPERATING PROBE (P/N 963.82.21.251) – AGE AND
TOOLS DATA
Effectivity: ALL 12-B-00-00-00-00A-060A-A
UNCLASSIFIED 2021-07-08 Page 10
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Data module/Technical publication Title
12-B-79-20-03-01A-066A-A OIL FILTER REMOVAL CHUTE (P/N 513.79.12.050) – AGE
AND TOOLS DATA
12-B-79-20-03-02A-066A-A OIL FILTER HOUSING PULLER (P/N 968.20.11.906) – AGE
AND TOOLS DATA
12-B-79-20-03-03A-066A-A OIL FILTER ELEMENT PULLER (P/N 968.20.11.913) – AGE
AND TOOLS DATA
12-B-79-30-06-01A-066A-A PRESSURE CALIBRATOR TEST SET (P/N 990.00.00.830) –
AGE AND TOOLS DATA
12-B-79-30-06-01A-066B-A PRESSURE CALIBRATOR TEST SET (P/N 990.00.00.864) -
AGE AND TOOLS DATA
12-B-79-30-06-02A-066A-A PARTICLE TEST TOOL (P/N 990.00.00.139) – AGE AND
TOOLS DATA
Description
This Data Module gives a list of Pilatus Tool Numbers by Chapter. The maintenance procedures give the applicable
tools and the Tool Number. The first three digits of the Tool Number give the location of the equipment in Table 2.
The last three digits give the tool number. For example T07-005 is Tool 005 in Chapter 7.
The use of an asterisk (*) that precedes a tool number is defined in the introduction data module, refer to TEM 12-
B-00-00-00-00A-018C-A.
Table 2 List of chapters
Chapter Title Table reference
0 General maintenance Table 3
5 Scheduled/unscheduled servicing Table 4
7 Lifting and shoring Table 5
8 Levelling and weighing Table 6
9 Handling and taxiing Table 7
10 Parking, mooring and storing Table 8
12 Servicing Table 9
20 Standard practices - Airframe systems Table 10
21 Environmental control Table 11
22 Auto flight Table 12
23 Communications Table 13
24 Electrical power Table 14
25 Equipment/furnishings Table 15
26 Fire protection Table 16
27 Flight controls Table 17
28 Fuel Table 18
29 Hydraulic power Table 19
30 Ice and rain protection Table 20
31 Indicating/recording systems Table 21
32 Landing gear Table 22
33 Lights Table 23
Effectivity: ALL 12-B-00-00-00-00A-060A-A
UNCLASSIFIED 2021-07-08 Page 11
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Table 2 List of chapters (Continued from previous page)
Chapter Title Table reference
34 Navigation Table 24
35 Oxygen Table 25
45 Central Maintenance System Table 26
46 Systems Integration and Display Table 27
51 Standard practices - Structures Table 28
52 Doors Table 29
53 Fuselage Table 30
54 Nacelles/pylons Table 31
55 Stabilizers Table 32
56 Windows Table 33
57 Wings Table 34
60 Standard practices - Propeller Table 35
61 Propeller Table 36
70 Standard practices - Engine Table 37
71 Power plant Table 38
72 Engine Table 39
73 Engine fuel and control Table 40
74 Ignition Table 41
76 Engine controls Table 42
77 Engine indicating Table 43
78 Exhaust Table 44
79 Oil Table 45
80 Starting Table 46
1 Chapter 0 - General Maintenance
Table 3 List of AGE, tools and Tool Numbers for Chapter 0 - General maintenance
Tool Number Equipment description Part Number AGE and tools Data Module
- - - -
2 Chapter 5 - Scheduled/Unscheduled Servicing
Table 4 List of AGE, tools and Tool Numbers for Chapter 5 - Scheduled/unscheduled servicing
Tool Number Equipment description Part Number AGE and tools Data Module
T05-005 THEODOLITE 903.70.34.120 -
T05-010 VIDEO BORESCOPE 990.00.00.254 12-B-05-00-00-00A-066A-A
NO LONGER AVAILABLE
VIDEO BORESCOPE 990.00.00.263 12-B-05-00-00-00A-066B-A
VIDEO BORESCOPE 990.00.00.278 12-B-05-00-00-00A-066C-A
Effectivity: ALL 12-B-00-00-00-00A-060A-A
UNCLASSIFIED 2021-07-08 Page 12
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Chapter 7 - Lifting and Shoring
Table 5 List of AGE, tools and Tool Numbers for Chapter 7 - Lifting and Shoring
Tool Number Equipment description Part Number AGE and tools Data Module
T07-005 JACK, HYDRAULIC 968.85.81.230 12-B-07-10-02-01A-066A-A
T07-010 JACK ADAPTOR KIT 968.85.81.233 12-B-07-10-02-02A-066A-A
T07-015 JACK, HYDRAULIC 968.85.81.214 12-B-07-10-02-03A-066A-A
T07-025 JACK, AXLE, HYDRAULIC 968.85.81.218 12-B-07-10-02-05A-066A-A
T07-030 NOSE WHEEL JACK ADAPTOR 507.20.12.052 12-B-07-10-02-06A-066A-A
T07-035 MAIN WHEEL JACK ADAPTOR 507.20.12.051 12-B-07-10-02-07A-066A-A
T07-040 NWS LOCKING SCREW 513.32.12.050 12-B-07-10-02-08A-066A-A
4 Chapter 8 - Leveling and Weighing
Table 6 List of AGE, tools and Tool Numbers for Chapter 8 - Leveling and weighing
Tool number Equipment description Part Number AGE and tools Data Module
T08-005 AIRCRAFT WEIGHING EQUIPMENT 990.00.02.155 12-B-08-10-01-00A-066A-A
990.00.02.157 12-B-08-10-01-00A-066B-A
990.00.02.167 12-B-08-10-01-00A-066C-A
990.00.02.185 12-B-08-10-01-00A-066D-A
T08-010 INCLINOMETER 903.70.32.410 12-B-08-20-01-00A-066A-A
5 Chapter 9 - Handling and Taxiing
Table 7 List of AGE, tools and Tool Numbers for Chapter 9 - Handling and taxiing
Tool number Equipment description Part Number AGE and tools Data Module
T09-005 MULTI HEAD TOW BAR 990.00.00.904 12-B-09-10-01-01A-066A-A
T09-010 HEAD ATTACHMENT 990.00.00.907 12-B-09-10-01-02A-066A-A
990.00.00.943 12-B-09-10-01-02A-066B-A
6 Chapter 10 - Parking, Mooring and Storing
Table 8 List of AGE, tools and Tool Numbers for Chapter 10 - Parking, mooring and storing
Tool number Equipment description Part Number AGE and tools Data Module
T10-005 COCKPIT SUN SCREEN 990.00.00.881 12-B-10-10-02-01A-066A-A
T10-015 WHEEL CHOCK 990.00.00.909 12-B-10-10-02-03A-066A-A
Effectivity: ALL 12-B-00-00-00-00A-060A-A
UNCLASSIFIED 2021-07-08 Page 13
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
7 Chapter 12 - Servicing
Table 9 List of AGE, tools and Tool Numbers for Chapter 12 - Servicing
Tool number Equipment description Part Number AGE and tools Data Module
T12-005 TIRE/STRUT SERVICE GAUGE 903.70.32.911 12-B-12-10-06-01A-066A-A
T12-010 OXYGEN TROLLEY 990.00.00.601 12-B-12-10-06-02A-066A-A
T12-015 OXYGEN ADAPTOR 990.00.00.604 12-B-12-10-06-03A-066A-A
T12-020 FUEL SAMPLE UNIT 990.00.00.908 12-B-12-10-06-04A-066A-A
T12–025 NITROGEN CART WITH BOOSTER 990.00.00.702 12-B-12-10-06-05A-066A-A
T12-028 STATIC PORT WASH COVER 990.00.00.167 12-B-12-20-01-00A-066A-A
T12-030 SAFETY CLIP - CIRCUIT BREAKER 110.88.07.065 12-B-12-20-07-01A-066A-A
HOLD OPEN
T12-035 COMPRESSION SPRAYER 968.86.93.124 12-B-12-20-07-02A-066A-A
T12-040 GREASE GUN 904.21.02.103 12-B-12-20-07-03A-066A-A
904.21.02.104 12-B-12-20-07-03A-066B-A
904.21.02.102 12-B-12-20-07-03A-066C-A
904.21.02.702 12-B-12-20-07-03A-066D-A
904.21.02.110 12-B-12-20-07-03A-066E-A
8 Chapter 20 - Standard Practices - Airframe Systems
Table 10 List of AGE, tools and Tool Numbers for Chapter 20 - Standard practices - Airframe systems
Tool number Equipment description Part Number AGE and tools Data Module
T20-005 CORROSION TREATMENT EQUIP- 904.21.06.622 12-B-20-40-01-01A-066A-A
MENT PUMP
T20-010 CORROSION TREATMENT EQUIP- 904.21.06.623 12-B-20-40-01-02A-066A-A
MENT PRESSURE CUP
9 Chapter 21 - Environmental Control
Table 11 List of AGE, tools and Tool Numbers for Chapter 21 - Environmental control
Tool number Equipment description Part Number AGE and tools Data Module
T21-005 CABIN PRESSURIZATION UNIT 990.00.00.660 12-B-21-30-30-00A-066A-A
T21-010 CABIN PRESSURIZATION UNIT 990.00.00.661 12-B-21-30-30-01A-066A-A
T21-015 CABIN PRESSURIZATION UNIT 990.00.00.663 12-B-21-30-30-02A-066A-A
T21-020 ADAPTOR KIT 990.00.00.662 12-B-21-30-30-03A-066A-A
T21-030 QUICK CAL 990.00.00.818 12-B-21-40-17-02A-066A-A
T21-035 QUICK CAL 990.00.00.819 12-B-21-40-17-03A-066A-A
T21-041 SPECIAL INSERT 513.21.21.002 12-B-21-40-17-05A-066A-A
513.21.21.007 12-B-21-40-17-05A-066B-A
T21-050 AIR CONDITIONING SERVICE STA- 990.00.09.216 12-B-21-50-04-02A-066A-A
TION
NO LONGER AVAILABLE
Effectivity: ALL 12-B-00-00-00-00A-060A-A
UNCLASSIFIED 2021-07-08 Page 14
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Table 11 List of AGE, tools and Tool Numbers for Chapter 21 - Environmental control (Continued from previous
page)
Tool number Equipment description Part Number AGE and tools Data Module
AIR CONDITIONING SERVICE STA- 990.00.09.207 12-B-21-50-04-02A-066B-A
TION, 220-240 VOLTS
T21-055 AIR CONDITIONING SERVICE STA- 990.00.09.206 12-B-21-50-04-02A-066C-A
TION, 110 VOLTS
T21-060 SERVICE KIT 990.00.09.213 12-B-21-50-04-03A-066A-A
T21-062 UV LEAK DETECTION LIGHT 990.00.09.236 12-B-21-50-04-04A-066A-A
10 Chapter 22 - Auto Flight
Table 12 List of AGE, tools and Tool Numbers for Chapter 22 - Auto Flight
Tool number Equipment description Part Number AGE and tools Data Module
T22-006 ADAPTOR 985.92.03.903 12-B-22-10-08-01A-066A-A
T22-010 CLUTCH PLATE 985.92.03.902 12-B-22-10-08-02A-066A-A
*T22-012 KIT, INDICATOR AOA RIGGING 513.34.09.106 12-B-22-20-07-00A-066A-A
GAUGE
*T22-015 AOA CALIBRATION TOOL LH 513.22.12.055 12-B-22-20-07-01A-066A-A
*T22-020 AOA CALIBRATION TOOL RH 513.22.12.056 12-B-22-20-07-02A-066A-A
*T22-025 TORQUE SIMULATOR 513.22.12.001 12-B-22-20-07-03A-066A-A
NO LONGER AVAILABLE
TORQUE SIMULATOR 513.22.12.011 12-B-22-20-07-03A-066B-A
11 Chapter 23 - Communications
Table 13 List of AGE, tools and Tool Numbers for Chapter 23 - Communications
Tool number Equipment description Part Number AGE and tools Data Module
T23-005 ANTENNA RELEASE TOOL 110.85.07.347 12-B-23-11-05-01A-066A-A
T23-010 SPRING BALANCE 110.85.07.251 12-B-23-11-05-02A-066A-A
NO LONGER AVAILABLE
SPRING BALANCE 903.70.32.818 12-B-23-11-05-02A-066B-A
T23-015 SATCOM AEROWAVE 100 MAINTE- 985.83.14.226 12-B-23-16-01-00A-066A-A
NANCE CABLE (MSN 545, 1001 -
1719, 1721 - 1942)
SATCOM AEROWAVE 100 MAINTE- 985.99.99.634 12-B-23-16-01-00A-066B-A
NANCE CABLE (MSN 1720, 2001 -
Up)
Effectivity: ALL 12-B-00-00-00-00A-060A-A
UNCLASSIFIED 2021-07-08 Page 15
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12 Chapter 24 - Electrical Power
Table 14 List of AGE, tools and Tool Numbers for Chapter 24 - Electrical power
Tool number Equipment description Part Number AGE and tools Data Module
T24-005 BATTERY CHARGER / ANALYZER 110.85.07.410 12-B-24-00-01-01A-066A-A
T24-010 STARTER/GENERATOR QAD ADAP- 513.24.09.025 12-B-24-00-01-02A-066A-A
TOR WRENCH
13 Chapter 25 - Equipment/Furnishings
Table 15 List of AGE, tools and Tool Numbers for Chapter 25 - Equipment/furnishings
Tool number Equipment description Part Number AGE and tools Data Module
T25-001 SARSAT BEACON TESTER 990.00.00.211 12-B-25-63-01-00A-066A-A
NO LONGER AVAILABLE
SARSAT BEACON TESTER 990.00.00.215 12-B-25-63-01-00A-066B-A
T25-005 ULTRASONIC TEST SET (TS500) 990.00.00.266 12-B-25-63-04-00A-066A-A
14 Chapter 26 - Fire Protection
Table 16 List of AGE, tools and Tool Numbers for Chapter 26 - Fire protection
Tool number Equipment description Part Number AGE and tools Data Module
- - - -
15 Chapter 27 - Flight Controls
Table 17 List of AGE, tools and Tool Numbers for Chapter 27 - Flight controls
Tool number Equipment description Part Number AGE and tools Data Module
T27-005 RIGGING PIN 110.85.07.050 12-B-27-10-03-01A-066A-A
T27-010 TENSIOMETER 110.85.07.242 12-B-27-10-03-02A-066A-A
903.70.31.504 12-B-27-10-03-02A-066B-A
T27-015 RIGGING PIN 110.85.07.252 12-B-27-10-03-03A-066A-A
T27-020 RIGGING PIN 513.27.12.050 12-B-27-10-03-04A-066A-A
*T27-026 RIGGING BLOCK ASSEMBLY 513.27.12.075 12-B-27-10-03-05A-066B-A
*T27-030 RUDDER BALANCING ADAPTOR 513.27.12.051 12-B-27-20-03-01A-066A-A
T27-035 RIGGING PIN 513.27.72.001 12-B-27-30-03-01A-066A-A
*T27-045 MAINTENANCE UTILITY DISC 513.27.12.063 -
NO LONGER AVAILABLE
FCMU MAINTENANCE UTILITY DISC 513.27.12.001 12-B-27-50-10-02A-066B-A
513.27.12.002 12-B-27-50-10-02A-066C-A
*T27-050 GREASE GUN 904.21.01.103 12-B-27-50-10-03A-066A-A
*T27-055 TEMPLATE 513.27.12.066 12-B-27-50-10-04A-066A-A
*T27-065 BACKLASH MEASURING TOOL 978.73.20.902 12-B-27-50-10-06A-066A-A
T27-070 TURNBUCKLE FIX TOOL 513.27.24.258 12-B-27-00-00-00A-066A-A
Effectivity: ALL 12-B-00-00-00-00A-060A-A
UNCLASSIFIED 2021-07-08 Page 16
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
16 Chapter 28 - Fuel
Table 18 List of AGE, tools and Tool Numbers for Chapter 28 - Fuel
Tool number Equipment description Part Number AGE and tools Data Module
*T28-060 SIMPLIFIED SCI READER SOFT- 513.28.12.001 12-B-28-40-10-01A-066A-A
WARE
*T28-061 SIMPLIFIED SCI READER SOFT- 513.28.12.002 12-B-28-40-10-01A-066B-A
WARE
*T28-062 SIMPLIFIED SCI READER SOFT- 513.28.12.003 12-B-28-40-10-01A-066C-A
WARE
*T28-065 SCI INTERFACE CABLE 990.00.00.856 12-B-28-40-10-02A-066A-A
17 Chapter 29 - Hydraulic Power (MSN 1001-1299, 1301-1450)
Table 19 List of AGE, tools and Tool Numbers for Chapter 29 - Hydraulic power
Tool number Equipment description Part Number AGE and tools Data Module
- - - -
18 Chapter 30 - Ice and Rain Protection
Table 20 List of AGE, tools and Tool Numbers for Chapter 30 - Ice and rain protection
Tool number Equipment description Part Number AGE and tools Data Module
T30-005 OAT SIMULATOR 513.30.12.004 12-B-30-60-03-01A-066B-A
513.30.12.007 12-B-30-60-03-01A-066C-A
T30-010 PROPELLER DE-ICE TEST SET 985.99.99.631 12-B-30-60-04-01A-066A-A
19 Chapter 31 - Indicating/Recording Systems
Table 21 List of AGE, tools and Tool Numbers for Chapter 31 - Indicating/recording systems
Tool number Equipment description Part Number AGE and tools Data Module
*T31-030 FRED FILE 531.30.12.023 12-B-31-30-10-00A-066A-A
*T31-031 FRED FILE 531.30.12.027 12-B-31-30-10-00A-066B-A
*T31-032 FRED FILE 531.30.12.029 12-B-31-30-10-00A-066C-A
*T31-033 FRED FILE 531.30.12.032 12-B-31-30-10-00A-066D-A
*T31-035 CVFDR and ACMS DATA ANALYSIS 513.31.12.002 12-B-31-30-10-01A-066A-A
TOOLS DISC
ACMS and LDR DATA ANALYSIS 513.31.12.003 12-B-31-30-10-01A-066B-A
DISC
Effectivity: ALL 12-B-00-00-00-00A-060A-A
UNCLASSIFIED 2021-07-08 Page 17
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
20 Chapter 32 - Landing Gear
Table 22 List of AGE, tools and Tool Numbers for Chapter 32 - Landing gear
Tool number Equipment description Part Number AGE and tools Data Module
T32-005 HYDRAULIC BEAD BREAKER 990.00.02.101 12-B-32-00-01-01A-066A-A
T32-010 TIRE RING 9 INCH 990.00.02.107 12-B-32-00-01-02A-066A-A
T32-015 TIRE RING 13 INCH 990.00.02.105 12-B-32-00-01-03A-066A-A
*T32-020 ADJUSTMENT TOOL 513.32.12.057 12-B-32-10-04-01A-066A-A
T12-025 NITROGEN TROLLEY 990.00.00.701 12-B-32-10-04-02A-066A-A
*T32-030 PROXIMITY SWITCH TEST BOX 986.99.99.602 12-B-32-10-04-03A-066A-A
*T32-036 LANDING GEAR TOOL KIT 513.32.12.002 12-B-32-10-04-04A-066A-A
T32-040 DIGITAL FORCE GAUGE 903.70.32.921 12-B-32-20-07-01A-066A-A
NO LONGER AVAILABLE
DIGITAL FORCE GAUGE 903.70.32.924 12-B-32-20-07-01A-066B-A
T32-050 FORK 513.32.12.047 12-B-32-20-07-02A-066A-A
*T32-055 COMPRESSION TOOL 513.32.12.052 12-B-32-20-07-03A-066A-A
T32-061 TORQUE WRENCH ADAPTOR 904.10.89.227 12-B-32-30-06-01A-066A-A
T32-065 WRENCH 904.10.08.228 12-B-32-30-06-02A-066A-A
T32-070 BRAKE BLEEDING RIG 990.00.00.160 12-B-32-40-07-01A-066A-A
T32-075 BRAKE BLEEDING ADAPTOR KIT 990.00.00.161 12-B-32-40-07-02A-066A-A
T32-080 SOCKET 904.10.62.141 12-B-32-40-07-03A-066A-A
T32-085 SOCKET 904.10.62.131 12-B-32-40-07-04A-066A-A
T32-090 WRENCH 904.10.00.038 12-B-32-40-07-05A-066A-A
T32-095 TORQUE WRENCH 904.10.89.120 12-B-32-40-07-06A-066A-A
T32-096 TORQUE WRENCH 904.10.89.142 12-B-32-40-07-06A-066B-A
T32-105 TORQUE WRENCH ADAPTOR 904.10.89.186 12-B-32-40-07-08A-066A-A
T32-106 TORQUE WRENCH ADAPTOR 513.32.12.117 12-B-32-40-07-08A-066B-A
T32-110 WHEEL BALANCER 990.00.02.109 12-B-32-40-07-09A-066A-A
*T32-115 ADAPTOR CABLE, AIRCRAFT 985.99.99.615 12-B-32-60-10-00A-066A-A
*T32-120 ADAPTOR CABLE, PROXIMITY 985.99.99.616 12-B-32-60-10-00A-066B-A
SWITCH
*T32-125 TEST BOX 513.32.12.023 12-B-32-30-06-05A-066A-A
T32-130 SHIMMY DAMPER LEVEL GAUGE 513.32.12.132 12-B-32-50-01-00A-066A-A
ASSEMBLY
T32-135 MLG FOLDING STRUT GAGE 513.32.12.114 12-B-32-60-05-00A-066A-A
21 Chapter 33 - Lights
Table 23 List of AGE, tools and Tool Numbers for Chapter 33 - Lights
Tool number Equipment description Part Number AGE and tools Data Module
T33-001 SAFETY GLASSES N/A 12-B-33-00-01-00A-066A-A
Effectivity: ALL 12-B-00-00-00-00A-060A-A
UNCLASSIFIED 2021-07-08 Page 18
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
22 Chapter 34 - Navigation
Table 24 List of AGE, tools and Tool Numbers for Chapter 34 - Navigation
Tool number Equipment description Part Number AGE and tools Data Module
T34-005 PITOT TEST ADAPTOR 990.00.00.206 12-B-34-11-30-01A-066A-A
T34-015 STATIC TEST ADAPTOR 990.00.00.208 12-B-34-11-30-03A-066A-A
T34-020 STATIC BLANKING ADAPTOR 990.00.00.209 12-B-34-11-30-04A-066A-A
T34-025 AIR DATA TEST SET 990.00.00.225 12-B-34-11-30-05A-066A-A
AIR DATA TEST SET 990.00.00.240 12-B-34-11-30-05A-066B-A
NO LONGER AVAILABLE
AIR DATA TEST SET - ADVANCED 990.00.00.241 12-B-34-11-30-05A-066C-A
HAND TERMINAL.
NO LONGER AVAILABLE
AIR DATA TEST SET 990.00.00.257 12-B-34-11-30-05A-066D-A
T34-035 COMPASS SWING TROLLEY 513.34.09.019 12-B-34-21-02-02A-066A-A
NO LONGER AVAILABLE
COMPASS SWING TROLLEY 513.34.09.029 12-B-34-21-02-02A-066B-A
T34-050 SUB-D CABLE 990.00.01.201 12-B-34-57-05-02A-066A-A
T34-055 DIAL INDICATOR 903.70.14.807 12-B-34-11-30-10A-066A-A
T34-060 MOUNTING BLOCK 513.34.12.010 12-B-34-11-30-15A-066A-A
23 Chapter 35 - Oxygen
Table 25 List of AGE, tools and Tool Numbers for Chapter 35 - Oxygen
Tool number Equipment description Part Number AGE and tools Data Module
T35-005 WRENCH OXYGEN ADAPTOR, 513.35.12.050 12-B-35-10-03-01A-066A-A
COCKPIT
T35-010 WRENCH OXYGEN ADAPTOR, CAB- 513.35.12.051 12-B-35-20-05-01A-066A-A
IN
24 Chapter 45 - Central Maintenance System (CMS)
Table 26 List of AGE, tools and Tool Numbers for Chapter 45 - Central Maintenance System (CMS)
Tool number Equipment description Part Number AGE and tools Data Module
*T45-005 MAINTENANCE BOX 985.99.99.610 12-B-45-00-01-00A-066A-A
NO LONGER AVAILABLE
MAINTENANCE BOX 985.99.99.638 12-B-45-00-01-00A-066B-A
*T45-006 MAINTENANCE BOX UPGRADE KIT 985.99.99.636 12-B-45-00-01-00A-066C-A
T45-010 LAPTOP COMPUTER - 12-B-45-45-00-00A-066A-A
T45-015 - - -
T45-020 LAN KIT LTEPIC-25 - 12-B-45-45-01-00A-066A-A
NO LONGER AVAILABLE
LAN KIT LANTAP-10 990.00.01.203 12-B-45-45-01-00A-066B-A
Effectivity: ALL 12-B-00-00-00-00A-060A-A
UNCLASSIFIED 2021-07-08 Page 19
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Table 26 List of AGE, tools and Tool Numbers for Chapter 45 - Central Maintenance System (CMS) (Continued
from previous page)
Tool number Equipment description Part Number AGE and tools Data Module
PCMCIA LAN KIT 990.00.01.208 12-B-45-45-01-00A-066C-A
NO LONGER AVAILABLE
LAN KIT 10 MBIT 990.00.01.209 12-B-45-45-01-00A-066D-A
T45-025 LAN KIT 100 MBIT 990.00.01.210 12-B-45-45-01-00A-066E-A
25 Chapter 46 - Systems Integration and Display
Table 27 List of AGE, tools and Tool Numbers for Chapter 46 - Systems integration and display
Tool number Equipment description Part Number AGE and tools Data Module
T46-005 APPLE iPAD - 12-B-46-21-00-00A-066A-A
26 Chapter 51 - Standard Practices - Structures
Table 28 List of AGE, tools and Tool Numbers for Chapter 51 - Standard practices - Structure
Tool number Equipment description Part Number AGE and tools Data Module
T51-001 EDDY CURRENT TEST DEVICE 990.00.02.181 12-B-51-00-00-00A-066A-A
27 Chapter 52 - Doors
Table 29 List of AGE, tools and Tool Numbers for Chapter 52 - Doors
Tool number Equipment description Part Number AGE and tools Data Module
*T52-005 ADJUSTMENT KIT, CARGO DOOR 513.52.12.010 12-B-52-30-10-01A-066A-A
28 Chapter 53 - Fuselage
Table 30 List of AGE, tools and Tool Numbers for Chapter 53 - Fuselage
Tool number Equipment description Part Number AGE and tools Data Module
- - - -
29 Chapter 54 - Nacelles/Pylons
Table 31 List of AGE, tools and Tool Numbers for Chapter 54 - Nacelles/pylons
Tool number Equipment description Part Number AGE and tools Data Module
- - - -
Effectivity: ALL 12-B-00-00-00-00A-060A-A
UNCLASSIFIED 2021-07-08 Page 20
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
30 Chapter 55 - Stabilizers
Table 32 List of AGE, tools and Tool Numbers for Chapter 55 - Stabilizers
Tool number Equipment description Part Number AGE and tools Data Module
- - - -
31 Chapter 56 - Windows
Table 33 List of AGE, tools and Tool Numbers for Chapter 56 - Windows
Tool number Equipment description Part Number AGE and tools Data Module
- - - -
32 Chapter 57 - Wings
Table 34 List of AGE, tools and Tool Numbers for Chapter 57 - Wings
Tool number Equipment description Part Number AGE and tools Data Module
*T57-005 WING/FUSELAGE SPANNER SET 513.24.12.001 12-B-57-00-04-01A-066A-A
T57-010 WING REMOVAL/INSTALLATION KIT 513.57.12.001 12-B-57-00-04-02A-066A-A
(MSN 1001 - 1575)
NO LONGER AVAILABLE
WING REMOVAL/INSTALLATION KIT 513.57.12.055 12-B-57-00-04-05A-066A-A
(MSN 1001 - 9999)
*T57-015 WING BUSH REMOVAL/INSTALLA- 513.57.12.004 12-B-57-00-04-04A-066A-A
TION KIT
*T57-020 MEASURING TOOL KIT 513.57.12.003 12-B-57-00-04-03A-066A-A
33 Chapter 60 - Standard Practices - Propeller
Table 35 List of AGE, tools and Tool Numbers for Chapter 60 - Standard practices - Propeller
Tool number Equipment description Part Number AGE and tools Data Module
- - - -
34 Chapter 61 - Propeller
Table 36 List of AGE, tools and Tool Numbers for Chapter 61 - Propeller
Tool number Equipment description Part Number AGE and tools Data Module
T61-005 DYNAMIC BALANCING EQUIPMENT 513.61.12.002 12-B-61-00-01-01A-066A-A
DYNAMIC BALANCING EQUIPMENT 968.29.12.989 12-B-61-00-01-01A-066B-A
(WITHOUT CALIBRATOR)
T61-006 TRANSPORT CONTAINER 906.08.11.472 12-B-61-10-02-05A-066A-A
(4-BLADED PROPELLER)
T61-008 SUPPORT PLATE ASSEMBLY 513.61.21.014 12-B-61-10-02-07A-066A-A
Effectivity: ALL 12-B-00-00-00-00A-060A-A
UNCLASSIFIED 2021-07-08 Page 21
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Table 36 List of AGE, tools and Tool Numbers for Chapter 61 - Propeller (Continued from previous page)
Tool number Equipment description Part Number AGE and tools Data Module
T61-010 DYNAMIC BALANCING ADAPTOR 513.61.12.061 12-B-61-00-01-02A-066A-A
KIT
T61-015 TORQUE WRENCH SET. 904.10.89.136 12-B-61-10-02-01A-066A-A
NO LONGER AVAILABLE
TORQUE WRENCH 904.10.89.139 12-B-61-10-02-01A-066B-A
T61-020 SPECIAL SOCKET 513.61.12.053 12-B-61-10-02-02A-066A-A
T61-025 STAND 513.61.12.050 12-B-61-10-02-03A-066A-A
T61-030 BETA SYSTEM PULLER 990.00.00.906 12-B-61-10-02-04A-066A-A
T61-035 ADAPTER ASSEMBLY 513.61.12.015 12-B-61-10-02-06A-066A-A
(4-BLADED PROPELLER)
T61-040 TRANSPORT CONTAINER 906.08.11.490 12-B-61-10-02-05A-066B-A
(5-BLADED PROPELLER)
T61-045 ADAPTER ASSEMBLY 513.61.12.013 12-B-61-10-02-06A-066B-A
(5-BLADED PROPELLER)
T61-050 SPINNER INLAY 990.00.02.051 12-B-61-10-02-08A-066A-A
35 Chapter 70 - Standard Practices - Engine
Table 37 List of AGE, tools and Tool Numbers for Chapter 70 - Engine
Tool number Equipment description Part Number AGE and tools Data Module
- - - -
36 Chapter 71 - Power Plant
Table 38 List of AGE, tools and Tool Numbers for Chapter 71 - Power plant
Tool number Equipment description Part Number AGE and tools Data Module
T71-005 NLG STRUT COLLAR 513.71.12.002 12-B-71-00-06-01A-066A-A
T71-010 ENGINE COMPRESSOR WASH RIG 513.71.12.001 12-B-71-00-06-02A-066A-A
T71-015 ECS BLANKING DISC RIG 513.21.12.050 12-B-71-00-06-03A-066A-A
T71-020 ENGINE SLING 968.20.12.942 12-B-71-00-06-04A-066A-A
*T71-025 COMPRESSOR WASH RIG FITTING 513.71.21.007 12-B-71-00-06-05A-066A-A
37 Chapter 72 - Engine
Table 39 List of AGE, tools and Tool Numbers for Chapter 72 - Engine
Tool number Equipment description Part Number AGE and tools Data Module
- - - -
Effectivity: ALL 12-B-00-00-00-00A-060A-A
UNCLASSIFIED 2021-07-08 Page 22
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
38 Chapter 73 - Engine Fuel and Control
Table 40 List of AGE, tools and Tool Numbers for Chapter 73 - Engine fuel and control
Tool number Equipment description Part Number AGE and tools Data Module
- - - -
39 Chapter 74 - Ignition
Table 41 List of AGE, tools and Tool Numbers for Chapter 74 - Ignition
Tool number Equipment description Part Number AGE and tools Data Module
- - - -
40 Chapter 76 - Engine Controls
Table 42 List of AGE, tools and Tool Numbers for Chapter 76 - Engine controls
Tool number Equipment description Part Number AGE and tools Data Module
- - - -
41 Chapter 77 - Engine Indicating
Table 43 List of AGE, tools and Tool Numbers for Chapter 77 - Engine indicating
Tool number Equipment description Part Number AGE and tools Data Module
T77-005 TURBINE TEMPERATURE TEST SET 990.00.00.831 12-B-77-00-01-01A-066A-A
990.00.00.859 12-B-77-00-01-01A-066B-A
T77-025 PRESSURE CALIBRATOR 990.00.00.839 12-B-77-40-05-02A-066A-A
NO LONGER AVAILABLE
PRESSURE CALIBRATOR 990.00.00.858 12-B-77-40-05-02A-066B-A
42 Chapter 78 - Exhaust
Table 44 List of AGE, tools and Tool Numbers for Chapter 78 - Exhaust
Tool number Equipment description Part Number AGE and tools Data Module
- - - -
43 Chapter 79 - Oil
Table 45 List of AGE, tools and Tool Numbers for Chapter 79 - Oil
Tool number Equipment description Part Number AGE and tools Data Module
T79-005 OPERATING PROBE 963.82.21.251 12-B-79-00-01-01A-066A-A
T79-010 OIL FILTER REMOVAL CHUTE 513.79.12.050 12-B-79-20-03-01A-066A-A
T79-015 OIL FILTER HOUSING PULLER 968.20.11.906 12-B-79-20-03-02A-066A-A
T79-020 OIL FILTER ELEMENT PULLER 968.20.11.913 12-B-79-20-03-03A-066A-A
Effectivity: ALL 12-B-00-00-00-00A-060A-A
UNCLASSIFIED 2021-07-08 Page 23
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Table 45 List of AGE, tools and Tool Numbers for Chapter 79 - Oil (Continued from previous page)
Tool number Equipment description Part Number AGE and tools Data Module
T79-025 PRESSURE CALIBRATOR TEST SET 990.00.00.830 12-B-79-30-06-01A-066A-A
NO LONGER AVAILABLE
PRESSURE CALIBRATOR TEST SET 990.00.00.864 12-B-79-30-06-01A-066B-A
T79-030 PARTICLE TEST TOOL 990.00.00.139 12-B-79-30-06-02A-066A-A
44 Chapter 80 - Starting
Table 46 List of AGE, tools and Tool Numbers for Chapter 80 - Starting
Tool number Equipment description Part Number AGE and tools Data Module
- - - -
Effectivity: ALL 12-B-00-00-00-00A-060A-A
End of data module
UNCLASSIFIED 2021-07-08 Page 24
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
VIDEO BORESCOPE (P/N 990.00.00.254)
AGE AND TOOLS DATA
Table of Contents Page
VIDEO BORESCOPE (P/N 990.00.00.254) - AGE AND TOOLS DATA..................................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 2
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
2 Parts List - Video Borescope P/N 990.00.00.254................................................... 2
Index of Figures Page
1 Video Borescope (P/N 990.00.00.254)................................................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The video borescope is used for visual inspection procedures to examine the internal areas of aircraft engines and
structure. A trolley case gives it protection when not in operation.
The video borescope has a high-resolution 5 inch color-display screen and has the functions and properties that
follow:
− Digital zoom
− LED lighting
− Four-way articulation
− AC and DC power operation
− Water proof
Effectivity: ALL 12-B-05-00-00-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
− Records video
− Captures still images
− SD card storage
− Text annotation
− Side view operation.
2 Dimensions
Length 508 mm x width 373 mm x depth 147 mm
(20.0 in. x 14.7 in. x 5.8 in.)
3 Mass
6,5 kg
(14.3 lbs.)
4 Level/Use
Servicing
5 Parts List
Table 2 Parts List - Video Borescope P/N 990.00.00.254
Fig. Ref. Part Number Nomenclature Units for each Assembly
Figure 1 [1] 990.00.00.254 Video borescope 1
Effectivity: ALL 12-B-05-00-00-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
21-A-130012-A-S4080-22385-A-01-1
Figure 1 Video Borescope (P/N 990.00.00.254)
Effectivity: ALL 12-B-05-00-00-00A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-05-00-00-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
VIDEO BORESCOPE (P/N 990.00.00.263)
AGE AND TOOLS DATA
Table of Contents Page
VIDEO BORESCOPE (P/N 990.00.00.263) - AGE AND TOOLS DATA..................................... 1
1 Application.............................................................................................................. 1
1.1 Main Unit................................................................................................................ 2
1.2 Handheld Control Unit............................................................................................ 2
1.3 Insertion Tube......................................................................................................... 2
2 Dimensions............................................................................................................. 2
3 Mass....................................................................................................................... 3
4 Level/Use................................................................................................................ 3
5 Parts List................................................................................................................. 3
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Video Borescope (P/N 990.00.00.263)................................................................... 4
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The video borescope is used for visual inspection procedures to examine the internal areas of aircraft engines and
structure. A trolley case gives the borescope protection when it is not in use.
The video borescope has these main parts:
− The main unit
− The handheld control unit
− The insertion tube.
The video borescope has a high-resolution 6.5 inch color-display screen and has the functions and properties:
Effectivity: ALL 12-B-05-00-00-00A-066B-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
− 5x digital zoom
− Ultra high intensity LED lighting
− Four-way articulation
− AC and DC power operation
− Water proof
− Records video (MPEG-4)
− Captures still images (JPEG)
− USB flash memory
− Text annotation
− Side view operation.
1.1 Main Unit
The main unit consists of the unit body with an integral 6.5 inch high-resolution LCD color display and the battery
power supply. The main unit also has connections for the AC power supply, a USB port and a video VGA output.
1.2 Handheld Control Unit
The handheld control unit has quick access buttons, levers and a joystick that has these functions:
− Control of the borescope (on the insertion tube) in four directions
− Control of the image
− Control to record the still-image or video
− Display menu control options.
1.3 Insertion Tube
The insertion tube lets the operator get access to the necessary inspection area. The insertion tube consists of:
− The tube body
− The scope and the device that changes the direction of the scope
− The ultra-high intensity LED lighting
− The two-stage temperature sensor with visual and aural alert.
2 Dimensions
The trolley case:
− 586 mm x 480 mm x 176 mm
− (23.07 in x 18.9 in x 6.93 in).
The main unit minimum dimensions:
− 227 mm x 64 mm x 192 mm
− (8.9 in x 2.5 in x 7.4 in).
The main unit maximum dimensions:
Effectivity: ALL 12-B-05-00-00-00A-066B-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
− 239 mm x 99 mm x 215 mm
− (9.4 in x 3.9 in x 8.5 in).
The handheld control unit:
− 365 mm x 93 mm x 192 mm
− (14.4 in x 3.7 in x 7.6 in).
The insertion tube:
− Probe diameter 4 mm (0.157 in)
− Length 3,5 m (11.5 ft).
3 Mass
The trolley case, the main unit, the handheld control unit and the insertion tube:
− 12,0 kg
− (26.4 lb).
The main unit with the battery installed:
− 3,0 kg
− (6.6 lb).
The handheld control unit:
− 1,0 kg
− (2.2 lb).
4 Level/Use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each as-
sembly
Fig. 1 990.00.00.263 VIDEO BORESCOPE -
Figure 1 [1] - HANDHELD CONTROL UNIT AND INSERTION TUBE 1
Figure 1 [2] - MAIN UNIT 1
Effectivity: ALL 12-B-05-00-00-00A-066B-A
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
1 2
21-A-130012-A-S4080-24108-A-01-1
Figure 1 Video Borescope (P/N 990.00.00.263)
Effectivity: ALL 12-B-05-00-00-00A-066B-A
End of data module
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
VIDEO BORESCOPE (P/N 990.00.00.278)
AGE AND TOOLS DATA
Table of Contents Page
VIDEO BORESCOPE (P/N 990.00.00.278) - AGE AND TOOLS DATA..................................... 1
1 Application.............................................................................................................. 1
1.1 Main Unit................................................................................................................ 2
1.2 Insertion Tube......................................................................................................... 2
2 Dimensions............................................................................................................. 2
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 3
5 Parts List................................................................................................................. 3
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Video Borescope (P/N 990.00.00.278)................................................................... 4
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The video borescope is used for visual inspection procedures to examine the internal areas of aircraft engines and
structure. A carry case gives the borescope and its accessories protection during transportation.
The video borescope has these main parts:
− The main unit
− The insertion tube.
Effectivity: ALL 12-B-05-00-00-00A-066C-A
UNCLASSIFIED 2021-07-08 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
1.1 Main Unit
The main unit has an integral 4.3 inch high-resolution LCD color display and the battery power supply. It has
connections for the AC power supply, headset, HDMI (video output) and USB and slots for SDHC card and
MicroSDHC card. It has these functions:
− 5x digital zoom
− AC and DC power operation
− Image share via applicable mobile terminals (optional USB WiFi LAN adapter required)
− Records video (MPEG-4) (optional MicroSDHC card required)
− Captures still images (JPEG) (SDHC card).
The lower part of the unit also has the controls. The controls have quick access buttons and two joysticks and have
these functions:
− Control of the borescope (on the insertion tube) in four directions
− Control of the image
− Control to record the still-image or video
− Display menu control options.
1.2 Insertion Tube
The insertion tube lets the operator get access to the necessary inspection area. The insertion tube consists of:
− The tube body
− The scope and the device that changes the direction of the scope
− The ultra-high intensity LED lighting
− The two-stage temperature sensor with visual and aural alert.
Optional optical tip adapters are available, they are stored in the optical adapter case.
2 Dimensions
The carry case:
− 455 mm x 330 mm x 185 mm (18 in x 13 in x 7.3 in).
The video borescope unit:
− 203 mm x 128 mm x 110 mm (8 in x 5 in x 4.3 in).
The insertion tube:
− Probe diameter 4 mm (0.157 in)
− Length 2 m (6.56 ft).
3 Mass
The main unit (with the battery installed):
− 1,15 kg (2.54 lb).
Effectivity: ALL 12-B-05-00-00-00A-066C-A
UNCLASSIFIED 2021-07-08 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
4 Level/Use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each as-
sembly
Fig. 1 990.00.00.278 VIDEO BORESCOPE KIT, IV9420GL -
Figure 1 [1] - MAIN UNIT 1
Figure 1 [2] - AC POWER ADAPTER 1
Figure 1 [3] - OPTICAL ADAPTER CASE 1
Figure 1 [4] - CARRY CASE 1
Figure 1 [5] - INSTRUCTION MANUAL 1
Figure 1 [6] N4156000 LITHIUM-ION BATTERY, BLH-1, MAJ-2340 2
Figure 1 [7] - INSERTION TUBE 1
Figure 1 [8] - LIGHT SOURCE, MAJ-2336 1
- N4155100 IPLEX TIP ADAPTOR 4 MM, 120°, FORWARD VIEW, 1
NEAR FOCUS, TYP AT120D/NF-IV94G
- N4155300 IPLEX TIP ADAPTOR 4 MM, 100°, SIDE VIEW 90°, 1
NEAR FOCUS, TYP AT100S/NF-IV94G
- V6210380E000 BATTERY CHARGER 1
- Q0200522 WIRELESS LAN DONGLE (USB A FORMAT) 1
Effectivity: ALL 12-B-05-00-00-00A-066C-A
UNCLASSIFIED 2021-07-08 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 5
12-A-050000-A-S4080-02187-A-01-1
Figure 1 Video Borescope (P/N 990.00.00.278)
Effectivity: ALL 12-B-05-00-00-00A-066C-A
End of data module
UNCLASSIFIED 2021-07-08 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
HYDRAULIC JACK (968.85.81.230)
AGE AND TOOLS DATA
Table of Contents Page
HYDRAULIC JACK (968.85.81.230) - AGE AND TOOLS DATA................................................ 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Hydraulic Jack (P/N 968.85.81.230)....................................................................... 2
References
Table 1 References
Data module/Technical publication Title
12-B-07-10-02-02A-066A-A JACKING ADAPTOR KIT (P/N 968.85.81.233) – AGE AND
TOOLS DATA
Description
1 Application
To lift the aircraft at the main jacking points. An adapter from the jacking adaptor kit, P/N 968.85.81.233 (Ref. 12-B-
07-10-02-02A-066A-A) is also required.
Effectivity: ALL 12-B-07-10-02-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-071001-A-S4080-30000-A-01-1
Figure 1 Hydraulic Jack (P/N 968.85.81.230)
Effectivity: ALL 12-B-07-10-02-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
JACKING ADAPTOR KIT (P/N 968.85.81.233)
AGE AND TOOLS DATA
Table of Contents Page
JACKING ADAPTOR KIT (P/N 968.85.81.233) - AGE AND TOOLS DATA................................ 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Jacking Adapter Kit (P/N 968.85.81.233)............................................................... 2
References
Table 1 References
Data module/Technical publication Title
12-B-07-10-02-01A-066A-A HYDRAULIC JACK (P/N 968.85.81.230) – AGE AND TOOLS
DATA
12-B-07-10-02-03A-066A-A HYDRAULIC JACK (P/N 968.85.81.214) - AGE AND TOOLS
DATA
Description
1 Application
This adapter kit contains two main and one tail adapter. It is used during aircraft jacking operations together with
Hydraulic Jack P/N 968.85.81.230 (Ref. 12-B-07-10-02-01A-066A-A) on the main jacking point and Hydraulic Jack
P/N 968.85.81.214 (Ref. 12-B-07-10-02-03A-066A-A) on the tail jacking point.
Effectivity: ALL 12-B-07-10-02-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-071002-A-S4080-30001-A-01-1
Figure 1 Jacking Adapter Kit (P/N 968.85.81.233)
Effectivity: ALL 12-B-07-10-02-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
HYDRAULIC JACK (P/N 968.85.81.214)
AGE AND TOOLS DATA
Table of Contents Page
HYDRAULIC JACK (P/N 968.85.81.214) - AGE AND TOOLS DATA......................................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Hydraulic Jack (P/N 968.85.81.214)....................................................................... 2
References
Table 1 References
Data module/Technical publication Title
12-B-07-10-02-02A-066A-A JACKING ADAPTOR KIT (P/N 968.85.81.233) – AGE AND
TOOLS DATA
Description
1 Application
This jack is used for lifting the aircraft at tail position. An Adapter from Kit P/N 968.85.81.233 (Ref. 12-B-07-10-02-
02A-066A-A) is also required.
Effectivity: ALL 12-B-07-10-02-03A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-071003-A-S4080-30002-A-01-1
Figure 1 Hydraulic Jack (P/N 968.85.81.214)
Effectivity: ALL 12-B-07-10-02-03A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
AXLE JACK (P/N 968.85.81.218)
AGE AND TOOLS DATA
Table of Contents Page
AXLE JACK (P/N 968.85.81.218) - AGE AND TOOLS DATA..................................................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Axle Jack (P/N 968.85.81.218)............................................................................... 2
References
Table 1 References
Data module/Technical publication Title
12-B-07-10-02-06A-066A-A NOSE WHEEL JACKING ADAPTOR (P/N 507.20.12.052) –
AGE AND TOOLS DATA
12-B-07-10-02-07A-066A-A MAIN WHEEL JACKING ADAPTOR (P/N 507.20.12.051) –
AGE AND TOOLS DATA
Description
1 Application
This jack or suitable equivalent is used in conjunction with Nose-Wheel Jacking Adapter P/N 507.20.12.052 (Ref.
12-B-07-10-02-06A-066A-A) and Main-Wheel Jacking Adapter P/N 507.20.12.051, (Ref.12-B-07-10-02-07A-066A-
A) to change nose or main wheels.
Effectivity: ALL 12-B-07-10-02-05A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-071005-A-S4080-30003-A-01-1
Figure 1 Axle Jack (P/N 968.85.81.218)
Effectivity: ALL 12-B-07-10-02-05A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
NOSE WHEEL JACKING ADAPTOR (P/N 507.20.12.052)
AGE AND TOOLS DATA
Table of Contents Page
NOSE WHEEL JACKING ADAPTOR (P/N 507.20.12.052) - AGE AND TOOLS DATA............. 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Nose Wheel Jacking Adapter (P/N 507.20.12.052)................................................ 2
References
Table 1 References
Data module/Technical publication Title
12-B-07-10-02-05A-066A-A AXLE JACK (P/N 968.85.81.218) – AGE AND TOOLS DATA
Description
1 Application
This adapter is used in conjunction with the Axle Jack P/N 968.85.81.218 (Ref. 12-B-07-10-02-05A-066A-A) or
suitable equivalent, to facilitate changing of the main wheels.
Effectivity: ALL 12-B-07-10-02-06A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-071006-A-S4080-30004-A-01-1
Figure 1 Nose Wheel Jacking Adapter (P/N 507.20.12.052)
Effectivity: ALL 12-B-07-10-02-06A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
MAIN WHEEL JACKING ADAPTOR (P/N 507.20.12.051)
AGE AND TOOLS DATA
Table of Contents Page
MAIN WHEEL JACKING ADAPTOR (P/N 507.20.12.051) - AGE AND TOOLS DATA.............. 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Main Wheel Jacking Adapter (P/N 507.20.12.051)................................................ 2
References
Table 1 References
Data module/Technical publication Title
12-B-07-10-02-05A-066A-A AXLE JACK (P/N 968.85.81.218) – AGE AND TOOLS DATA
Description
1 Application
This adapter is used in conjunction with the Axle Jack P/N 968.85.81.218 (Ref. 12-B-07-10-02-05A-066A-A) or
suitable equivalent, to facilitate changing of the main wheels.
Effectivity: ALL 12-B-07-10-02-07A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-071007-A-S4080-30005-A-01-1
Figure 1 Main Wheel Jacking Adapter (P/N 507.20.12.051)
Effectivity: ALL 12-B-07-10-02-07A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
NWS LOCKING SCREW (P/N 513.32.12.050)
AGE AND TOOLS DATA
Table of Contents Page
NWS LOCKING SCREW (P/N 513.32.12.050) - AGE AND TOOLS DATA................................ 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 NWS Locking Screw (P/N 513.32.12.050)............................................................. 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This locking screw secures the nose wheel in the neutral position during wheel replacement.
Effectivity: ALL 12-B-07-10-02-08A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-071008-A-S4080-30006-A-01-1
Figure 1 NWS Locking Screw (P/N 513.32.12.050)
Effectivity: ALL 12-B-07-10-02-08A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
AIRCRAFT WEIGHING SYSTEM (P/N 990.00.02.155)
AGE AND TOOLS DATA
Table of Contents Page
AIRCRAFT WEIGHING SYSTEM (P/N 990.00.02.155) - AGE AND TOOLS DATA................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Aircraft Weighing Equipment (P/N 990.00.02.155)................................................. 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The aircraft weighing system is a compact, lightweight, low profile wheel load weighing system for measurement of
weights up to 2000 kgs (4000 lbs) per loading plate. It is stored in a aluminium box and consists of three low profile
loading plates, a charging kit and the appropriate manuals.
The equipment requires an annual calibration.
2 Dimensions
80 cm x 60 cm x 41 cm
(31.5 in x 23.6 in x 16.1 in).
Effectivity: ALL 12-B-08-10-01-00A-066A-A
UNCLASSIFIED 2020-11-25 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
70 kg
(155 lb).
4 Level/Use
Servicing.
5 Parts List
Refer to the vendor documentation.
Effectivity: ALL 12-B-08-10-01-00A-066A-A
UNCLASSIFIED 2020-11-25 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-081001-A-S4080-30007-A-01-1
Figure 1 Aircraft Weighing Equipment (P/N 990.00.02.155)
Effectivity: ALL 12-B-08-10-01-00A-066A-A
End of data module
UNCLASSIFIED 2020-11-25 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-08-10-01-00A-066A-A
UNCLASSIFIED 2020-11-25 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
AIRCRAFT WEIGHING SYSTEM (P/N 990.00.02.157)
AGE AND TOOLS DATA
Table of Contents Page
AIRCRAFT WEIGHING SYSTEM (P/N 990.00.02.157) - AGE AND TOOLS DATA................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Aircraft Weighing Equipment (P/N 990.00.02.157)................................................. 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The aircraft weighing equipment is a compact, lightweight, low profile weigher for measurement of weights up to
2500 kg (5000 lb) per loading plate. It is stored in an aluminum box and consists of three loading plates, three
ramps, three chargers with 9,15 meter (30 feet) cable and user manuals.
The weighing equipment must have an annual calibration.
2 Dimensions
80 cm x 53,3 cm x 7,6 cm (scale overall)
(31.5 in x 21.0 in x 3.0 in).
Effectivity: 12-B-08-10-01-00A-066B-A
UNCLASSIFIED 2020-11-25 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
110 kg
(242.5 lb).
4 Level/Use
Servicing.
5 Parts List
Refer to the vendor documentation.
Effectivity: 12-B-08-10-01-00A-066B-A
UNCLASSIFIED 2020-11-25 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-081001-A-S4080-02071-A-01-1
Figure 1 Aircraft Weighing Equipment (P/N 990.00.02.157)
Effectivity: 12-B-08-10-01-00A-066B-A
End of data module
UNCLASSIFIED 2020-11-25 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: 12-B-08-10-01-00A-066B-A
UNCLASSIFIED 2020-11-25 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
AIRCRAFT WEIGHING SYSTEM (P/N 990.00.02.167)
AGE AND TOOLS DATA
Table of Contents Page
AIRCRAFT WEIGHING SYSTEM (P/N 990.00.02.167) - AGE AND TOOLS DATA................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Aircraft Weighing Equipment (P/N 990.00.02.167)................................................. 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The aircraft weighing equipment is a compact, lightweight, low profile weigher for measurement of weights up to
2500 kg (5000 lb) per loading plate. It is stored in an aluminum box and consists of three loading plates, three
ramps, three chargers with 9,15 meter (30 feet) cable and user manuals.
The weighing equipment must have an annual calibration.
2 Dimensions
80 cm x 53,3 cm x 7,6 cm (scale overall)
(31.5 in x 21.0 in x 3.0 in).
Effectivity: ALL 12-B-08-10-01-00A-066C-A
UNCLASSIFIED 2020-11-25 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
110 kg
(242.5 lb).
4 Level/Use
Servicing.
5 Parts List
Refer to the vendor documentation.
Effectivity: ALL 12-B-08-10-01-00A-066C-A
UNCLASSIFIED 2020-11-25 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-081001-A-S4080-02071-A-01-1
Figure 1 Aircraft Weighing Equipment (P/N 990.00.02.167)
Effectivity: ALL 12-B-08-10-01-00A-066C-A
End of data module
UNCLASSIFIED 2020-11-25 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-08-10-01-00A-066C-A
UNCLASSIFIED 2020-11-25 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
AIRCRAFT WEIGHING SYSTEM (P/N 990.00.02.185)
AGE AND TOOLS DATA
Table of Contents Page
AIRCRAFT WEIGHING SYSTEM (P/N 990.00.02.185) - AGE AND TOOLS DATA................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Aircraft Weighing Equipment (P/N 990.00.02.185)................................................. 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The aircraft weighing equipment is a compact, lightweight, low profile weigher for measurement of weights up to
2500 kg (5000 lb) per loading plate. It is stored in an aluminum box and consists of three loading plates powered by
commercially available AA (LR6) alkaline batteries and three ramps. The equipment is supplied with user manuals
and must have an annual calibration.
2 Dimensions
80 cm x 53,3 cm x 7,6 cm
(31.5 in x 21.0 in x 3.0 in).
Effectivity: ALL 12-B-08-10-01-00A-066D-A
UNCLASSIFIED 2020-11-25 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
110 kg
(242.5 lb).
4 Level/Use
Servicing.
5 Parts List
Refer to the vendor documentation.
Effectivity: ALL 12-B-08-10-01-00A-066D-A
UNCLASSIFIED 2020-11-25 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-081001-A-S4080-02071-A-01-1
Figure 1 Aircraft Weighing Equipment (P/N 990.00.02.185)
Effectivity: ALL 12-B-08-10-01-00A-066D-A
End of data module
UNCLASSIFIED 2020-11-25 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-08-10-01-00A-066D-A
UNCLASSIFIED 2020-11-25 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
INCLINOMETER (P/N 903.70.32.410)
AGE AND TOOLS DATA
Table of Contents Page
INCLINOMETER (P/N 903.70.32.410) - AGE AND TOOLS DATA............................................. 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Inclinometer (P/N 903.70.32.410)........................................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This inclinometer is used for leveling the aircraft. It also measures the deflection of the elevator, aileron, flap and
horizontal stabilizer trim during adjustment and is used to align the blades on receipt of a new propeller assembly.
Effectivity: ALL 12-B-08-20-01-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-082001-A-S4080-30008-A-01-1
Figure 1 Inclinometer (P/N 903.70.32.410)
Effectivity: ALL 12-B-08-20-01-00A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
MULTIHEAD TOWBAR (P/N 990.00.00.904)
AGE AND TOOLS DATA
Table of Contents Page
MULTIHEAD TOWBAR (P/N 990.00.00.904) - AGE AND TOOLS DATA................................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Multihead Towbar (P/N 990.00.00.904).................................................................. 2
References
Table 1 References
Data module/Technical publication Title
12-B-09-10-01-02A-066A-A HEAD ATTACHMENT (P/N 990.00.00.907) – AGE AND
TOOLS DATA
Description
1 Application
This towbar is used with the Attachment Head P/N 990.00.00.907 (Ref. 12-B-09-10-01-02A-066A-A), for nose
wheel towing/ground maneuvering of the aircraft with a tractor.
Effectivity: ALL 12-B-09-10-01-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-091001-A-S4080-30009-A-01-1
Figure 1 Multihead Towbar (P/N 990.00.00.904)
Effectivity: ALL 12-B-09-10-01-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
HEAD ATTACHMENT (P/N 990.00.00.907)
AGE AND TOOLS DATA
Table of Contents Page
HEAD ATTACHMENT (P/N 990.00.00.907) - AGE AND TOOLS DATA..................................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Head Attachment (P/N 990.00.00.907).................................................................. 2
References
Table 1 References
Data module/Technical publication Title
12-B-09-10-01-01A-066A-A MULTIHEAD TOWBAR (P/N 990.00.00.904) – AGE AND
TOOLS DATA
Description
1 Application
This Attachment Head is used with the Multihead Towbar P/N 990.00.00.904 (Ref. 12-B-09-10-01-01A-066A-A), for
nose wheel towing/ground maneuvering of the aircraft with a tractor.
Effectivity: ALL 12-B-09-10-01-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-091002-A-S4080-30010-A-01-1
Figure 1 Head Attachment (P/N 990.00.00.907)
Effectivity: ALL 12-B-09-10-01-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
HEAD ATTACHMENT (P/N 990.00.00.943)
AGE AND TOOLS DATA
Table of Contents Page
HEAD ATTACHMENT (P/N 990.00.00.943) - AGE AND TOOLS DATA..................................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Head Attachment (P/N 990.00.00.943).................................................................. 3
References
Table 1 References
Data module/Technical publication Title
12-B-09-10-01-01A-066A-A MULTIHEAD TOWBAR (P/N 990.00.00.904) – AGE AND
TOOLS DATA
Description
1 Application
The attachment head P/N 990.00.00.943 is used with the multi-head towbar (refer to TEM 12-B-09-10-01-01A-
066A-A) for nose-wheel towing/ground manoeuvring of the aircraft with a tractor.
2 Dimensions
158,75 mm x 460,386 mm x 101,6 mm
(6.25 in x 18.125 in x 4.0 in)
Effectivity: ALL 12-B-09-10-01-02A-066B-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
6,8 kg
(15.0 lb)
4 Level/Use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
1 990.00.00.943 Head, attachment 1
Effectivity: ALL 12-B-09-10-01-02A-066B-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-091002-A-S4080-79365-A-01-1
Figure 1 Head Attachment (P/N 990.00.00.943)
Effectivity: ALL 12-B-09-10-01-02A-066B-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-09-10-01-02A-066B-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
COCKPIT SUN SCREENS (P/N 990.00.00.881)
AGE AND TOOLS DATA
Table of Contents Page
COCKPIT SUN SCREENS (P/N 990.00.00.881) - AGE AND TOOLS DATA............................. 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Cockpit Sun Screens (P/N 990.00.00.881)............................................................. 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This set of sun screens is used to protect the avionics and interior from heat and UV damage, when the aircraft is
parked. It keeps the cockpit within a few degrees of outside temperature.
Effectivity: ALL 12-B-10-10-02-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-101001-A-S4080-30011-A-01-1
Figure 1 Cockpit Sun Screens (P/N 990.00.00.881)
Effectivity: ALL 12-B-10-10-02-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
WHEEL CHOCK SET (P/N 990.00.00.909)
AGE AND TOOLS DATA
Table of Contents Page
WHEEL CHOCK SET (P/N 990.00.00.909) - AGE AND TOOLS DATA..................................... 1
1 General................................................................................................................... 1
2 Weight and Dimensions.......................................................................................... 1
3 Level/Use................................................................................................................ 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Wheel Chocks (P/N 990.00.00.909)....................................................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 General
Installed front and rear of the main wheels when the aircraft is parked to prevent the aircraft rolling, should the
parking brake fail. These chocks can be used as well for ground support equipment. Their ribbed construction
allows for superior traction in a variety of weather conditions. Chocks have refelctive tape on three sides for greater
nighttime visibility. Chocks are together with heavy-duty nylon rope.
2 Weight and Dimensions
Weight: 7,7 kg (17 lbs)
Dimensions: Height 125 mm (5 in) Width 250 mm (10 in).
Effectivity: 12-B-10-10-02-03A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Level/Use
Note
This wheel chock replaces wheel chocks P/N 990.00.00.902.
Effectivity: 12-B-10-10-02-03A-066A-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-101002-A-S4080-30012-A-01-1
Figure 1 Wheel Chocks (P/N 990.00.00.909)
Effectivity: 12-B-10-10-02-03A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: 12-B-10-10-02-03A-066A-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
TIRE/STRUT SERVICE GAGE (P/N 903.70.32.911)
AGE AND TOOLS DATA
Table of Contents Page
TIRE/STRUT SERVICE GAGE (P/N 903.70.32.911) - AGE AND TOOLS DATA....................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Tire / Strut Service Gage (P/N 903.70.32.911)....................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This kit is used to check and charge the LDG shock struts (stage 1 and 2), the tire pressure and the nitrogen
reservoir tank. It includes a 0-3000 PSI digital and a 0-300 PSI analog gage.
Effectivity: ALL 12-B-12-10-06-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-121001-A-S4080-30012-A-01-1
Figure 1 Tire / Strut Service Gage (P/N 903.70.32.911)
Effectivity: ALL 12-B-12-10-06-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
OXYGEN TROLLEY (P/N 990.00.00.601)
AGE AND TOOLS DATA
Table of Contents Page
OXYGEN TROLLEY (P/N 990.00.00.601) - AGE AND TOOLS DATA....................................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Oxygen Trolley (P/N 990.00.00.601)...................................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This trolley is used to charge the aircraft oxygen system. A total of 4 oxygen bottles (40 liters) can be installed in
the trolley. It has a towbar at the front for towing.
Effectivity: ALL 12-B-12-10-06-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-121002-A-S4080-30013-A-01-1
Figure 1 Oxygen Trolley (P/N 990.00.00.601)
Effectivity: ALL 12-B-12-10-06-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
OXYGEN ADAPTOR (P/N 990.00.00.604)
AGE AND TOOLS DATA
Table of Contents Page
OXYGEN ADAPTOR (P/N 990.00.00.604) - AGE AND TOOLS DATA...................................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Oxygen Adapter (P/N 990.00.00.604).................................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This adapter is used for servicing the oxygen system. The thread size is 9/16-UNF-2A (SCOTT charging valve
26875) and AN - 4 (male).
Effectivity: ALL 12-B-12-10-06-03A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-121003-A-S4080-30014-A-01-1
Figure 1 Oxygen Adapter (P/N 990.00.00.604)
Effectivity: ALL 12-B-12-10-06-03A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
FUEL SAMPLE UNIT (P/N 990.00.00.908)
AGE AND TOOLS DATA
Table of Contents Page
FUEL SAMPLE UNIT (P/N 990.00.00.908) - AGE AND TOOLS DATA...................................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Fuel Sample Unit (P/N 990.00.00.908)................................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This unit is used during fuel sampling and draining of the various drain points. The following parts are included:
− 5/32 Hex
− 3/32 Hex
− 1/8 Hex
− # 2 Phillips
− # 3 Phillips
− 12-14 Slotted.
Effectivity: ALL 12-B-12-10-06-04A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-121004-A-S4080-30015-A-01-1
Figure 1 Fuel Sample Unit (P/N 990.00.00.908)
Effectivity: ALL 12-B-12-10-06-04A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
NITROGEN CART WITH BOOSTER (P/N 990.00.00.702)
AGE AND TOOLS DATA)
Table of Contents Page
NITROGEN CART WITH BOOSTER (P/N 990.00.00.702) - AGE AND TOOLS DATA)............ 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Nitrogen Cart With Booster (P/N 990.00.00.702)................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This cart transports up to 4 nitrogen bottles and generates high pressure nitrogen from low pressure bottles with a
self-contained nitrogen booster. It has a:
− High pressure regulator
− 25 to 4000 psi (1.7 to 276 bar) gage
− Low pressure regulator
− 0 to 500 psi (0.2 to 34.5 bar) gage
− 15ft (4.6m) #4 output hose.
The nitrogen bottles are not part of the cart.
Effectivity: ALL 12-B-12-10-06-05A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
10
MP
H/
16
kph
12-A-121005-A-S4080-30084-A-01-1
Figure 1 Nitrogen Cart With Booster (P/N 990.00.00.702)
Effectivity: ALL 12-B-12-10-06-05A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
STATIC PORT WASH COVER (P/N 990.00.00.167)
AGE AND TOOLS DATA
Table of Contents Page
STATIC PORT WASH COVER (P/N 990.00.00.167) - AGE AND TOOLS DATA....................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Static Port Wash Cover (P/N 990.00.00.167)......................................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The static port wash cover is used to cover the static port to prevent damage to the static port and water/cleaning
solution ingress into the static port. The static port wash cover is approved for use only when you wash the aircraft.
It is a universal static port wash cover that can bend to follow the contour of the aircraft skin, and is attached to the
aircraft skin by lever-operated suction-cups.
2 Dimensions
TBD
3 Mass
0,2 kg (0.5 lbs)
Effectivity: ALL 12-B-12-20-01-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
4 Parts List
Fig — Ref. Nomenclature Part No. Units for each assembly
Figure 1 [1] Static port wash cover 990.00.00.167 1
Effectivity: ALL 12-B-12-20-01-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-122001-A-S4080-79080-A-01-1
Figure 1 Static Port Wash Cover (P/N 990.00.00.167)
Effectivity: ALL 12-B-12-20-01-00A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-12-20-01-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
CIRCUIT BREAKER SAFETY CLIP (P/N 110.88.07.065)
AGE AND TOOLS DATA
Table of Contents Page
CIRCUIT BREAKER SAFETY CLIP (P/N 110.88.07.065) - AGE AND TOOLS DATA................ 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Circuit–Breaker Safety Clip (P/N 110.88.07.065)................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The safety clip is used to lock the push/pull type circuit breakers in the "OPEN" position and prevent inadvertent
operation of aircraft systems during maintenance.
Effectivity: ALL 12-B-12-20-07-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-122001-A-S4080-30016-A-01-1
Figure 1 Circuit–Breaker Safety Clip (P/N 110.88.07.065)
Effectivity: ALL 12-B-12-20-07-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
COMPRESSION SPRAYER (P/N 968.86.93.124)
AGE AND TOOLS DATA
Table of Contents Page
COMPRESSION SPRAYER (P/N 968.86.93.124) - AGE AND TOOLS DATA........................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Compression Sprayer (P/N 968.86.93.124)........................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This compression sprayer is used to apply soap or detergent solution during aircraft cleaning. It has a 10 liter
capacity.
Effectivity: ALL 12-B-12-20-07-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
303
Figure 1 Compression Sprayer (P/N 968.86.93.124)
Effectivity: ALL 12-B-12-20-07-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
GREASE GUN (P/N 904.21.02.103)
AGE AND TOOLS DATA
Table of Contents Page
GREASE GUN (P/N 904.21.02.103) - AGE AND TOOLS DATA................................................ 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Grease Gun (P/N 904.21.02.103)........................................................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This one hand operated grease gun has a cylinder capacity of 400 cm3. It contains a high pressure hose (500 mm)
long with a 4-piece connector. A non-slip plastic handle gives improved handling. The output, per stroke, is 0.5
cm3, operating pressure is 400 bar with a maximum pressure of 600 bar. Complete disassembly is possible to
allow easy cleaning and maintenance.
2 Dimensions
Length 328 mm (including hose 865 mm)
Width 199 mm (including grip)
Diameter 54 mm
Effectivity: ALL 12-B-12-20-07-03A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
1,55 kg (3.41 lbs)
4 Level/use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
1- 904.21.02.103 Grease gun -
36597.00 Connector 1
35193.00 High pressure hose 1
35290.00 Rotating coupling ⅛" BSP 1
35690.00 Filler cap 1
84301.01 Screw plug 1
80365.00 Seal 1
81394.00 Spring 1
32344.00 Valve pin 1
82010.00 Ball 1
43448.00 Valve seat 1
82204.00 O ring 1
84806.00 Snap ring 2
33708.00 Link plate 2
80657.00 Barrel seal 1
82666.01 Copper seal 1
33717.00 Non-return valve 1
33705.00 Handle 1
84391.00 Screw 2
80198.00 Seal 1
35591.00 Air release valve 1
82231.02 O ring 1
33709.00 Bolt 2
30636.00 Piston 1
81697.00 Torsion spring 1
33707.00 Lever 1
84631.00 Spiral pin 1
33721.00 Gun head complete 1
30170.00 Cylinder complete 1
Effectivity: ALL 12-B-12-20-07-03A-066A-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
441
Figure 1 Grease Gun (P/N 904.21.02.103)
Effectivity: ALL 12-B-12-20-07-03A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-12-20-07-03A-066A-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
GREASE GUN (P/N 904.21.02.104)
AGE AND TOOLS DATA
Table of Contents Page
GREASE GUN (P/N 904.21.02.104) - AGE AND TOOLS DATA................................................ 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Grease Gun (P/N 904.21.02.104)........................................................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This one-handed operated grease gun has a cylinder capacity of 400 to 500 ccm. It has a high pressure hose 500
mm (19.7 in.) long with a 90 degree connector. A non-slip plastic handle gives improved handling.
The output per stroke is 0,5 ccm, the operating pressure is 400 bar with a maximum pressure of 600 bar.
Complete disassembly is possible to allow for easy cleaning and maintenance.
2 Dimensions
Length — 328 mm (including hose 865 mm)
Width — 199 mm including handle
Diameter — 54 mm
Effectivity: ALL 12-B-12-20-07-03A-066B-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
1,55 kg (3.41 lbs)
4 Level/Use
Servicing
5 Parts List
Fig — Ref Part No. Nomenclature Units for each assembly
1— 904.21.02.104 Grease gun -
3083200 Seal kit 1
3372100 Pump head cpl. 1
3519300 High pressure hose 1
3529000 Rotating coupling 1
3659700 Connector 1
3819500 Cylinder cpl. 1
0000906 Spiral pin 1
3063600 Piston 1
3234400 Valve bolt 1
3370100 Wanner pump head 1
3370500 Grip cpl. 1
3370700 Lever 1
3370800 Clip 2
3370900 Pin 2
3371710 Check valve 1
3559100 Air release valve cpl. 1
3569000 Filler cap 1
4344800 Valve seat 1
8019800 Gasket 1
8036500 Gasket 1
8039500 Gasket 1
8065700 Gasket 1
8139400 Compression spring 1
8169700 Spring 1
8201000 Ball 1
8220400 O-ring 1
8223102 O-ring 1
8430101 Lock screw 1
8439100 Lens head screw 2
8463100 Spiral pin 1
8480600 Lock washer 2
Effectivity: ALL 12-B-12-20-07-03A-066B-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3800400 Barrel 1
3801300 Cover 1
3807800 Piston rod 1
3814600 Disk 1
3814700 Stop 1
3814801 Piston disk 1
8177100 Spring 1
8339800 Piston seal 1
8480800 Lock washer 1
3801300 Cover 1
3807800 Piston rod cpl. 1
8339800 Collar 1
441
Figure 1 Grease Gun (P/N 904.21.02.104)
Effectivity: ALL 12-B-12-20-07-03A-066B-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-12-20-07-03A-066B-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
GREASE GUN (P/N 904.21.02.102)
AGE AND TOOLS DATA
Table of Contents Page
GREASE GUN (P/N 904.21.02.102) - AGE AND TOOLS DATA................................................ 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Grease Gun (P/N 904.21.02.102)........................................................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
A high-pressure grease gun with a flexible steel delivery hose. It has a cylinder capacity of 400 ccm with an output
per stroke of 1,5 ccm and an operating pressure between 400 and 600 bar.
2 Dimensions
Grease gun cylinder:
− Length - 329 mm (12.95 in)
− Width - 135 mm (5.32 in), including handle
− Diameter - 65 mm (2.56 in).
Delivery hose:
Effectivity: ALL 12-B-12-20-07-03A-066C-A
UNCLASSIFIED 2021-07-08 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
− Length - 309 mm (12.17 in)
− Diameter - 14 mm (0.55 in).
3 Mass
2,115 kg (4.66 lbs)
4 Level/Use
Servicing
5 Parts List
Fig - ref Part No. Nomenclature Units for each as-
sembly
Fig. 1 904.21.02.102 Grease gun (including delivery hose) -
Effectivity: ALL 12-B-12-20-07-03A-066C-A
UNCLASSIFIED 2021-07-08 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-122007-A-S4080-02188-A-01-1
Figure 1 Grease Gun (P/N 904.21.02.102)
Effectivity: ALL 12-B-12-20-07-03A-066C-A
End of data module
UNCLASSIFIED 2021-07-08 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-12-20-07-03A-066C-A
UNCLASSIFIED 2021-07-08 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
GREASE GUN (P/N 904.21.02.702)
AGE AND TOOLS DATA
Table of Contents Page
GREASE GUN (P/N 904.21.02.702) - AGE AND TOOLS DATA................................................ 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Grease Gun (P/N 904.21.02.702)........................................................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
A high-pressure grease gun with a rigid angled delivery tube. It has a cylinder capacity of 120 ccm with an output
per stroke of 0,5 ccm and a maximum operating pressure of 400 bar.
2 Dimensions
3 Mass
Effectivity: ALL 12-B-12-20-07-03A-066D-A
UNCLASSIFIED 2021-07-08 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
4 Level/Use
Servicing
5 Parts List
Fig - ref Part No. Nomenclature Units for each as-
sembly
Fig. 1 904.21.02.702 Grease gun -
Effectivity: ALL 12-B-12-20-07-03A-066D-A
UNCLASSIFIED 2021-07-08 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-122007-A-S4080-02189-A-01-1
Figure 1 Grease Gun (P/N 904.21.02.702)
Effectivity: ALL 12-B-12-20-07-03A-066D-A
End of data module
UNCLASSIFIED 2021-07-08 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-12-20-07-03A-066D-A
UNCLASSIFIED 2021-07-08 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
GREASE GUN (P/N 904.21.02.110)
AGE AND TOOLS DATA
Table of Contents Page
GREASE GUN (P/N 904.21.02.110) - AGE AND TOOLS DATA................................................ 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Grease Gun (P/N 904.21.02.110)........................................................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The grease gun kit includes a high-pressure grease gun with a rigid delivery hose, a flexible delivery hose and a 90
º adapter. The one hand operated grease gun has a cylinder capacity of 400 ccm and an operating pressure
between 400 and 600 bar. The 90 º adapter lets the grease gun connect to flat grease nipples.
Note
Not suitable for silicone grease.
2 Dimensions
Effectivity: ALL 12-B-12-20-07-03A-066E-A
UNCLASSIFIED 2021-07-08 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
4 Level/Use
Servicing
5 Parts List
Fig - ref Part No. Nomenclature Units for each as-
sembly
Fig. 1 904.21.02.110 Grease gun kit -
Figure 1 [1] 10400715 Grease gun (including rigid delivery hose) 1
Figure 1 [2] 10187399 Flexible delivery hose 1
Figure 1 [3] 16702353 90 º adapter 1
Effectivity: ALL 12-B-12-20-07-03A-066E-A
UNCLASSIFIED 2021-07-08 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-122007-A-S4080-02190-A-01-1
Figure 1 Grease Gun (P/N 904.21.02.110)
Effectivity: ALL 12-B-12-20-07-03A-066E-A
End of data module
UNCLASSIFIED 2021-07-08 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-12-20-07-03A-066E-A
UNCLASSIFIED 2021-07-08 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
CORROSION TREATMENT EQUIPMENT PUMP (P/N 904.21.06.622)
AGE AND TOOLS DATA
Table of Contents Page
CORROSION TREATMENT EQUIPMENT PUMP (P/N 904.21.06.622) - AGE AND TOOLS 1
DATA...........................................................................................................................................
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Corrosion Treatment Equipment Pump (P/N 904.21.06.622)................................. 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
It is used to apply the corrosion preventive compound. It contains an air operated diaphragm pump, which fits onto
the 20 liter container and a misting spray gun with six different rod nozzles.
Effectivity: ALL 12-B-20-40-01-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-204001-A-S4080-30017-A-01-1
Figure 1 Corrosion Treatment Equipment Pump (P/N 904.21.06.622)
Effectivity: ALL 12-B-20-40-01-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
CORROSION TREATMENT EQUIPMENT PRESSURE CUP (P/N 904.21.06.623)
AGE AND TOOLS DATA
Table of Contents Page
CORROSION TREATMENT EQUIPMENT PRESSURE CUP (P/N 904.21.06.623) - AGE 1
AND TOOLS DATA.....................................................................................................................
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Corrosion Treatment Equipment, Pressure Cup (P/N 904.21.06.623)................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
It is used to apply the corrosion preventive compound. It contains a one liter pressure cup and a misting spray gun
with six different rod nozzles.
Effectivity: ALL 12-B-20-40-01-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-204002-A-S4080-30018-A-01-1
Figure 1 Corrosion Treatment Equipment, Pressure Cup (P/N 904.21.06.623)
Effectivity: ALL 12-B-20-40-01-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
CABIN PRESSURIZATION UNIT (P/N 990.00.00.660)
AGE AND TOOLS DATA
Table of Contents Page
CABIN PRESSURIZATION UNIT (P/N 990.00.00.660) - AGE AND TOOLS DATA................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Cabin Pressurization Unit (P/N 990.00.00.660)...................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
Quiet air source for leak testing of aircraft cabins and pressurization components. Integral high output blower and
controls allow maximum portability and convenience. Input power 220/230 VAC 60 Hz, pressure range 0-12PSIG,
air flow 0-310SCFM.
Effectivity: ALL 12-B-21-30-30-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
NIT
ATION U
SURIZ
PRES
AFT CABIN
AIRCR
12-A-213030-A-S4080-30020-A-01-1
Figure 1 Cabin Pressurization Unit (P/N 990.00.00.660)
Effectivity: ALL 12-B-21-30-30-00A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
CABIN PRESSURIZATION UNIT (P/N 990.00.00.661)
AGE AND TOOLS DATA
Table of Contents Page
CABIN PRESSURIZATION UNIT (P/N 990.00.00.661) - AGE AND TOOLS DATA................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Cabin Pressurization Unit (P/N 990.00.00.661)...................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
Quiet air source for leak testing of aircraft cabins and pressurization components. Integral high output blower and
controls allow maximum portability and convenience. Input power 380 VAC 50 Hz, pressure range 0-12PSIG, air
flow 0-310SCFM.
Effectivity: ALL 12-B-21-30-30-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
NIT
ATION U
SURIZ
PRES
AFT CABIN
AIRCR
12-A-213030-A-S4080-30020-A-01-1
Figure 1 Cabin Pressurization Unit (P/N 990.00.00.661)
Effectivity: ALL 12-B-21-30-30-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
CABIN PRESSURIZATION UNIT (P/N 990.00.00.663)
AGE AND TOOLS DATA
Table of Contents Page
CABIN PRESSURIZATION UNIT (P/N 990.00.00.663) - AGE AND TOOLS DATA................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Cabin Pressurization Unit (P/N 990.00.00.663)...................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
Quiet air source for leak testing of aircraft cabins and pressurization components. Integral high output blower and
controls allow maximum portability and convenience. Input power 415 VAC 50 Hz, pressure range 0-12PSIG, air
flow 0-310SCFM.
Effectivity: ALL 12-B-21-30-30-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
NIT
ATION U
SURIZ
PRES
AFT CABIN
AIRCR
12-A-213030-A-S4080-30020-A-01-1
Figure 1 Cabin Pressurization Unit (P/N 990.00.00.663)
Effectivity: ALL 12-B-21-30-30-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
ADAPTER KIT – CABIN PRESSURIZATION UNIT (P/N 990.00.00.662)
AGE AND TOOLS DATA
Table of Contents Page
ADAPTER KIT – CABIN PRESSURIZATION UNIT (P/N 990.00.00.662) - AGE AND TOOLS 1
DATA...........................................................................................................................................
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Adapter Kit – Cabin Pressurization Unit (P/N 990.00.00.662)................................ 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This kit is required to connect the cabin pressurization unit with the aircraft.
Effectivity: ALL 12-B-21-30-30-03A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-213004-A-S4080-30019-A-01-1
Figure 1 Adapter Kit – Cabin Pressurization Unit (P/N 990.00.00.662)
Effectivity: ALL 12-B-21-30-30-03A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
QUICK CAL (P/N 990.00.00.818)
AGE AND TOOLS DATA
Table of Contents Page
QUICK CAL (P/N 990.00.00.818) - AGE AND TOOLS DATA..................................................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Quick Cal (P/N 990.00.00.818)............................................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This High Temperature Quick Cal covers the temperature range from 30°C to 350°C. It has single larger well and
interchangeable inserts, 25 mm in diameter by 120 mm deep. It is supplied 100-130 VAC, 50/60 Hz. The high
temperature quick cal comes with a standard insert, a traceable certificate, a handbook and a carrying case.
Effectivity: ALL 12-B-21-40-17-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
TEMPERATUR
E RANGE 30-350
C
12-A-214017-A-S4080-00140-A-01-1
Figure 1 Quick Cal (P/N 990.00.00.818)
Effectivity: ALL 12-B-21-40-17-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
QUICK CAL (P/N 990.00.00.819)
AGE AND TOOLS DATA
Table of Contents Page
QUICK CAL (P/N 990.00.00.819) - AGE AND TOOLS DATA..................................................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Quick Cal (P/N 990.00.00.819)............................................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This High Temperature Quick Cal covers the temperature range from 30°C to 350°C. It has single larger well and
interchangeable inserts, 25 mm in diameter by 120 mm deep. It is supplied 200-250 VAC, 50/60 Hz. The high
temperature quick cal comes with a standard insert, a traceable certificate, a handbook and a carry case.
Effectivity: ALL 12-B-21-40-17-03A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
TEMPERATUR
E RANGE 30-350
C
12-A-214017-A-S4080-00140-A-01-1
Figure 1 Quick Cal (P/N 990.00.00.819)
Effectivity: ALL 12-B-21-40-17-03A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
SPECIAL INSERT (P/N 513.21.21.002)
AGE AND TOOLS DATA
Table of Contents Page
SPECIAL INSERT (P/N 513.21.21.002) - AGE AND TOOLS DATA........................................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Special Insert (P/N 513.21.21.002)........................................................................ 2
References
Table 1 References
Data module/Technical publication Title
12-B-21-40-17-02A-066A-A QUICK CAL (P/N 990.00.00.818) – AGE AND TOOLS DATA
12-B-21-40-17-03A-066A-A QUICK CAL (P/N 990.00.00.819) – AGE AND TOOLS DATA
Description
1 Application
This special insert is used together with the quick cal P/N 990.00.00.818 (Ref. 12-B-21-40-17-02A-066A-A) or P/N
990.00.00.819 (Ref. 12-B-21-40-17-03A-066A-A) to do a functional test of the duct over-temperature switch.
Effectivity: ALL 12-B-21-40-17-05A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-B-214017-A-S4080-79185-A-01-1
Figure 1 Special Insert (P/N 513.21.21.002)
Effectivity: ALL 12-B-21-40-17-05A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
SPECIAL INSERT (P/N 513.21.21.007)
AGE AND TOOLS DATA
Table of Contents Page
SPECIAL INSERT (P/N 513.21.21.007) - AGE AND TOOLS DATA........................................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts list.................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
2 Parts list - Special insert (P/N 513.21.21.007)........................................................ 2
Index of Figures Page
1 Special insert (P/N 513.21.21.007)......................................................................... 2
References
Table 1 References
Data module/Technical publication Title
12-B-21-40-17-02A-066A-A QUICK CAL (P/N 990.00.00.818) – AGE AND TOOLS DATA
12-B-21-40-17-03A-066A-A QUICK CAL (P/N 990.00.00.819) – AGE AND TOOLS DATA
12-B-21-40-17-05A-066A-A SPECIAL INSERT (P/N 513.21.21.002) – AGE AND TOOLS
DATA
Description
1 Application
This special insert is used together with the quick cal P/N 990.00.00.818 (Ref. 12-B-21-40-17-02A-066A-A) or P/N
990.00.00.819 (Ref. 12-B-21-40-17-03A-066A-A) to do a functional test of the duct over-temperature switch. It is an
alternative to the special insert detailed in TEM 12-B-21-40-17-05A-066A-A.
2 Dimensions
Diameter 31 mm (1.22 in) x length 121 mm (4.76 in).
Effectivity: ALL 12-B-21-40-17-05A-066B-A
UNCLASSIFIED 2021-07-08 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
0.16 kg (0.35 lb).
4 Level/Use
Servicing.
5 Parts list
Table 2 Parts list - Special insert (P/N 513.21.21.007)
Fig ref Part Number Nomenclature Units for each assembly
Figure 1 [1] 513.21.21.007 Special insert 1
ICN-12-B-214017-A-S4080-03593-A-01-1
Figure 1 Special insert (P/N 513.21.21.007)
Effectivity: ALL 12-B-21-40-17-05A-066B-A
End of data module
UNCLASSIFIED 2021-07-08 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
AIR CONDITIONING SERVICE STATION (P/N 990.00.09.216)
AGE AND TOOLS DATA
Table of Contents Page
AIR CONDITIONING SERVICE STATION (P/N 990.00.09.216) - AGE AND TOOLS DATA...... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Air Conditioning Service Station (P/N 990.00.09.216)............................................ 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This service station recovers, recycles, evacuates and charges refrigerant in fully automatic mode. Leak check
during the vacuum phase, new oil injection, dye injection, bottle heater and a service alarm whenever maintenance
and filter replacement is needed is further automatic features of this service station. All these functions can be done
if required in the manual mode.
Effectivity: R134A REFRIGERANT 12-B-21-50-04-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-215002-A-S4080-30020-A-01-1
Figure 1 Air Conditioning Service Station (P/N 990.00.09.216)
Effectivity: R134A REFRIGERANT 12-B-21-50-04-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
AIR CONDITIONING SERVICE STATION 220–240 VOLTS (P/N 990.00.09.207)
AGE AND TOOLS DATA
Table of Contents Page
AIR CONDITIONING SERVICE STATION 220–240 VOLTS (P/N 990.00.09.207) - AGE AND 1
TOOLS DATA..............................................................................................................................
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Weight..................................................................................................................... 2
4 Supply Voltage........................................................................................................ 2
5 Refrigerant.............................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Air Condtioning Service Station (P/N 990.00.09.207)............................................ 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This service station recovers, recycles, evacuates and charges refrigerant in fully automatic mode. Leak check
during the vacuum phase, new oil injection, dye injection and displayed messages whenever maintenance and filter
replacement is needed are further automatic features of this service station. All these functions can be done, if
required, in the manual mode.
A high pressure / low pressure hose (P/N 990.00.09.220) 5 meter long is used with this service station.
2 Dimensions
114 cm x 50 cm x 65 cm (45 in. x 19.5 in. x 25.6 in.).
Effectivity: 220-240 Volt 12-B-21-50-04-02A-066B-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Weight
90 Kg (243 lb) with empty tank.
4 Supply Voltage
220-240 Volt 50/60 Hz.
5 Refrigerant
R134a.
Effectivity: 220-240 Volt 12-B-21-50-04-02A-066B-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-215004-A-S4080-30086-A-01-1
Figure 1 Air Condtioning Service Station (P/N 990.00.09.207)
Effectivity: 220-240 Volt 12-B-21-50-04-02A-066B-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: 220-240 Volt 12-B-21-50-04-02A-066B-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
AIR CONDITIONING SERVICE STATION 110 VOLT (P/N 990.00.09.206)
AGE AND TOOLS DATA
Table of Contents Page
AIR CONDITIONING SERVICE STATION 110 VOLT (P/N 990.00.09.206) - AGE AND 1
TOOLS DATA..............................................................................................................................
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Weight..................................................................................................................... 2
4 Supply Voltage........................................................................................................ 2
5 Refrigerant.............................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Air Condtioning Service Station (P/N 990.00.09.206)............................................ 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This service station recovers, recycles, evacuates and charges refrigerant in fully automatic mode. Leak check
during the vacuum phase, new oil injection, dye injection and displayed messages whenever maintenance and filter
replacement is needed are further automatic features of this service station. All these functions can be done, if
required, in the manual mode.
A high pressure / low pressure hose (P/N 990.00.09.220) 5 meter long is used with this service station.
2 Dimensions
114 cm x 50 cm x 65 cm (45 in. x 19.5 in. x 25.6 in.).
Effectivity: 110 Volt 12-B-21-50-04-02A-066C-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Weight
90 Kg (243 lb) with empty tank.
4 Supply Voltage
110 Volt 60 Hz.
5 Refrigerant
R134a.
Effectivity: 110 Volt 12-B-21-50-04-02A-066C-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-215004-A-S4080-30086-A-01-1
Figure 1 Air Condtioning Service Station (P/N 990.00.09.206)
Effectivity: 110 Volt 12-B-21-50-04-02A-066C-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: 110 Volt 12-B-21-50-04-02A-066C-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
SERVICE KIT (P/N 990.00.09.213)
AGE AND TOOLS DATA
Table of Contents Page
SERVICE KIT (P/N 990.00.09.213) - AGE AND TOOLS DATA.................................................. 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/use................................................................................................................ 1
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This service kit is used to service the VCCS Service Station (P/N 990.00.09.212, 990.00.09.214, 990.00.09.215,
990.00.09.216 and 990.00.09.217). The kit has two replacement filters and oil.
2 Dimensions
TBD
3 Mass
TBD
4 Level/use
Servicing
Effectivity: R134A REFRIGERANT 12-B-21-50-04-03A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
1 990.00.09.213 Service kit -
-69230 -Filter 2
-51857 -Oil 1
Effectivity: R134A REFRIGERANT 12-B-21-50-04-03A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
UV LEAK DETECTION LIGHT (P/N 990.00.09.236)
AGE AND TOOLS DATA
Table of Contents Page
UV LEAK DETECTION LIGHT (P/N 990.00.09.236) - AGE AND TOOLS DATA....................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 UV Leak Detection Light (P/N 990.00.09.263)....................................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The Ultra Violet (UV) leak detector light is used to detect refrigerant leaks in air conditioning systems. The UV leak
detector light is supplied in a case, with UV goggles for eye protection.
2 Dimensions
11,43 cm x 27,31 cm x 8,89 cm
(4.5 in x 10.75 in x 3.5 in).
3 Mass
0,27 kg
Effectivity: ALL 12-B-21-50-04-04A-066A-A
UNCLASSIFIED 2020-11-25 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
(0.6 lb).
4 Level/Use
Servicing.
5 Parts List
Refer to vendor documentation.
Effectivity: ALL 12-B-21-50-04-04A-066A-A
UNCLASSIFIED 2020-11-25 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-215004-A-S4080-02036-A-01-1
Figure 1 UV Leak Detection Light (P/N 990.00.09.263)
Effectivity: ALL 12-B-21-50-04-04A-066A-A
End of data module
UNCLASSIFIED 2020-11-25 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-21-50-04-04A-066A-A
UNCLASSIFIED 2020-11-25 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
ADAPTOR (P/N 985.92.03.903)
AGE AND TOOLS DATA
Table of Contents Page
ADAPTOR (P/N 985.92.03.903) - AGE AND TOOLS DATA....................................................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/use................................................................................................................ 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Adaptor (P/N 985.92.03.903).................................................................................. 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The adaptor allows a torque wrench to be used to check the autopilot servo clutch settings. It is used with the servo
clutch plate P/N 982.92.03.902.
2 Dimensions
TBD
3 Mass
TBD
Effectivity: ALL 12-B-22-10-08-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
4 Level/use
Inspection/check
Effectivity: ALL 12-B-22-10-08-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-B-221008-A-S4080-01086-A-01-1
Figure 1 Adaptor (P/N 985.92.03.903)
Effectivity: ALL 12-B-22-10-08-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-22-10-08-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
CLUTCH PLATE (P/N 985.92.03.902)
AGE AND TOOLS DATA
Table of Contents Page
CLUTCH PLATE (P/N 985.92.03.902) - AGE AND TOOLS DATA............................................. 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Clutch Plate (P/N 985.92.03.902)........................................................................... 2
References
Table 1 References
Data module/Technical publication Title
12-B-22-10-08-01A-066A-A ADAPTOR (P/N 985.92.03.903) - AGE AND TOOLS DATA
Description
1 Application
This clutch plate is used in conjunction with the Adapter P/N 985.92.03.903 (Ref. 12-B-22-10-08-01A-066A-A), to
adjust the clutch assembly.
Effectivity: ALL 12-B-22-10-08-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-221002-A-S4080-30022-A-01-1
Figure 1 Clutch Plate (P/N 985.92.03.902)
Effectivity: ALL 12-B-22-10-08-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
KIT, INDICATOR AOA RIGGING GAUGE (P/N 513.34.09.106)
AGE AND TOOLS DATA
Table of Contents Page
KIT, INDICATOR AOA RIGGING GAUGE (P/N 513.34.09.106) - AGE AND TOOLS DATA...... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 2
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Kit, Indicator AOA Rigging Gauge (P/N 513.34.09.106)......................................... 3
References
Table 1 References
Data module/Technical publication Title
12-B-22-20-07-01A-066A-A AOA CALIBRATION TOOL, LH (P/N 513.22.12.055) – AGE
AND TOOLS DATA
12-B-22-20-07-02A-066A-A AOA CALIBRATION TOOL, RH (P/N 513.22.12.056) – AGE
AND TOOLS DATA
Description
1 Application
The kit, indicator AOA rigging gauge is a supplementary kit for the AOA calibration tool (LH and RH), refer to TEM
12-B-22-20-07-01A-066A-A and 12-B-22-20-07-02A-066A-A.
The kit, indicator AOA rigging gauge is used when the indicator supplied with the AOA calibration tool does not fit
the diameter of the AOA vane installed on the aircraft. The kit has five indicators of different diameters to cover the
range of possible AOA vane diameters.
Effectivity: ALL 12-B-22-20-07-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
2 Dimensions
240 mm x 160 mm x 48 mm.
9.45 in. x 6.3 in. x 1.89 in.
3 Mass
1,2 kg.
2.6 lbs.
4 Level/Use
Servicing.
5 Parts List
Fig — Ref. Part Number Description Units per assembly
1 513.34.09.106 Kit, Indicator AOA Rigging Gauge -
- 513.34.09.107 Indicator AOA rigging gauge, 18,9 1
- 513.34.09.108 Indicator AOA rigging gauge, 19,0 1
- 513.34.09.109 Indicator AOA rigging gauge, 19,1 1
- 513.34.09.110 Indicator AOA rigging gauge, 19,2 1
- 513.34.09.111 Indicator AOA rigging gauge, 19,3 1
- 906.08.11.414 Bag, AOA indicator kit 1
Effectivity: ALL 12-B-22-20-07-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-222007-A-S4080-79088-A-01-1
Figure 1 Kit, Indicator AOA Rigging Gauge (P/N 513.34.09.106)
Effectivity: ALL 12-B-22-20-07-00A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-22-20-07-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
AOA CALIBRATION TOOL, LH (P/N 513.22.12.055)
AGE AND TOOLS DATA
Table of Contents Page
AOA CALIBRATION TOOL, LH (P/N 513.22.12.055) - AGE AND TOOLS DATA...................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 AOA Calibration Tool, LH (P/N 513.22.12.055)...................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This calibration tool fits to the Angle Of Attack transmitter on the left hand wing. It is used after AOA transmitter
removal/installation and to maintain the stick pusher system.
Effectivity: ALL 12-B-22-20-07-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-222001-A-S4080-30023-A-01-1
Figure 1 AOA Calibration Tool, LH (P/N 513.22.12.055)
Effectivity: ALL 12-B-22-20-07-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
AOA CALIBRATION TOOL, RH (P/N 513.22.12.056)
AGE AND TOOLS DATA
Table of Contents Page
AOA CALIBRATION TOOL, RH (P/N 513.22.12.056) - AGE AND TOOLS DATA...................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 AOA Calibration Tool, RH (P/N 513.22.12.056)...................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This calibration tool fits to the Angle Of Attack transmitter on the right hand wing. It is used after AOA transmitter
removal/installation and to maintain the stick pusher system.
Effectivity: ALL 12-B-22-20-07-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-222002-A-S4080-30024-A-01-1
Figure 1 AOA Calibration Tool, RH (P/N 513.22.12.056)
Effectivity: ALL 12-B-22-20-07-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
TORQUE SIMULATOR (P/N 513.22.12.001)
AGE AND TOOLS DATA
Table of Contents Page
TORQUE SIMULATOR (P/N 513.22.12.001) - AGE AND TOOLS DATA................................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Torque Simulator (P/N 513.22.12.001)................................................................... 2
References
Table 1 References
Data module/Technical publication Title
12-B-22-20-07-03A-066B-A TORQUE SIMULATOR
Description
1 Application
Torque simulator P/N 513.22.12.001 is no longer available. An alternative torque simulator is P/N 513.22.12.011,
refer to TEM 12-B-22-20-07-03A-066B-A.
It is used to simulate a torque transducer signal during trouble shooting procedure. The simulator is connected to
the harness in place of the torque transducer. The length of the cable allows to take the simulator in the cockpit.
Effectivity: ALL 12-B-22-20-07-03A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
N
O
R
E
W
O
P
ST
JU
AD LE
UB
T RO
OR Y
G R F ONL
R NIN LATOSES
WASIMU RPO V)
E PU (DM
R QU ING T
TO OOT U
-O
HIS SH OR
S ET O NIT
U L-M
NA
SIG
12-A-222003-A-S4080-30025-A-01-1
Figure 1 Torque Simulator (P/N 513.22.12.001)
Effectivity: ALL 12-B-22-20-07-03A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
TORQUE SIMULATOR (P/N 513.22.12.011)
AGE AND TOOLS DATA
Table of Contents Page
TORQUE SIMULATOR (P/N 513.22.12.011) - AGE AND TOOLS DATA................................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Torque Simulator (P/N 513.22.12.011)................................................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
Used to simulate a torque transducer signal for a trouble shooting procedure. The simulator is connected to the
aircraft harness in place of the torque transducer. The length of the cable allows the torque simulator to be put in
the cockpit.
2 Dimensions
152,5 mm x 72,0 mm x 138 mm
(6.0 in. x 2.84 in. x 5.43 in.)
Effectivity: ALL 12-B-22-20-07-03A-066B-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
1,39 kg
(3.06 lbs.)
4 Level/Use
Servicing/troubleshooting.
5 Parts List
N/A
Effectivity: ALL 12-B-22-20-07-03A-066B-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
N
O
R
E
W
O
P
ST
JU
AD LE
UB
T RO
OR Y
G R F ONL
R NIN LATOSES
WASIMU RPO V)
E PU (DM
R QU ING T
TO OOT U
-O
HIS SH OR
S ET O NIT
U L-M
NA
SIG
12-A-222003-A-S4080-30025-A-01-1
Figure 1 Torque Simulator (P/N 513.22.12.011)
Effectivity: ALL 12-B-22-20-07-03A-066B-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-22-20-07-03A-066B-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
ANTENNA RELEASE TOOL (P/N 110.85.07.347)
AGE AND TOOLS DATA
Table of Contents Page
ANTENNA RELEASE TOOL (P/N 110.85.07.347) - AGE AND TOOLS DATA........................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Antenna Release Tool (P/N 110.85.07.347)........................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This tool is used when releasing antenna cables from the wire entry chuck jaws of span units.
Effectivity: ALL 12-B-23-11-05-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
4 7
7 3
5 0
0 8
1 1
12-A-231101-A-S4080-30026-A-01-1
Figure 1 Antenna Release Tool (P/N 110.85.07.347)
Effectivity: ALL 12-B-23-11-05-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
SPRING BALANCE (P/N 110.85.07.251)
AGE AND TOOLS DATA
Table of Contents Page
SPRING BALANCE (P/N 110.85.07.251) - AGE AND TOOLS DATA......................................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Spring Balance (P/N 110.85.07.251)...................................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This spring balance is used to adjust the tension of the antenna cable.
Effectivity: ALL 12-B-23-11-05-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
20k
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
12-A-231102-A-S4080-30027-A-01-1
Figure 1 Spring Balance (P/N 110.85.07.251)
Effectivity: ALL 12-B-23-11-05-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
SPRING BALANCE (P/N 903.70.32.818)
AGE AND TOOLS DATA
Table of Contents Page
SPRING BALANCE (P/N 903.70.32.818) - AGE AND TOOLS DATA........................................ 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Capacity.................................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Spring Balance (P/N 903.70.32.818)...................................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This spring balance is used to adjust the tension of the antenna cable.
2 Dimensions
Length without load 370 mm.
Diameter 32 mm.
3 Capacity
50 kg.
Effectivity: ALL 12-B-23-11-05-02A-066B-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-231102-A-S4080-30028-A-01-1
Figure 1 Spring Balance (P/N 903.70.32.818)
Effectivity: ALL 12-B-23-11-05-02A-066B-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
SATCOM MAINTENANCE CABLE (P/N 985.83.14.226)
AGE AND TOOLS DATA
Applicability: MSN 545, 1001 - 1719, 1721 -1942
Table of Contents Page
SATCOM MAINTENANCE CABLE (P/N 985.83.14.226) - AGE AND TOOLS DATA................. 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 2
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Satcom Aerowave 100 Maintenance Cable (P/N 985.83.14.226).......................... 3
References
Table 1 References
Data module/Technical publication Title
12-B-23-16-01-00A-066B-A SATCOM MAINTENANCE CABLE (P/N 985.99.99.634) - AGE
AND TOOLS DATA
Description
1 Application
This Satcom maintenance cable is applicable for MSN 545, 1001 thru 1719, 1721 thru 1942 only. For MSN 1720,
2001 and up, refer to TEM 12-B-23-16-01-00A-066B-A.
The Satcom maintenance cable is a twisted wire cable with a micro D connector at one end and an RS232
connector at the other end. It can be used to connect the Satcom High-Speed Data Unit (HDU) to a computer for
maintenance.
Effectivity: see data module page 1 12-B-23-16-01-00A-066A-A
UNCLASSIFIED 2020-11-25 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
2 Dimensions
Length (nominal) 3048 ±152 mm (120 ±6 in).
3 Mass
4 Level/Use
Servicing.
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
1 985.83.14.226 Maintenance cable, HDU 1
Effectivity: see data module page 1 12-B-23-16-01-00A-066A-A
UNCLASSIFIED 2020-11-25 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-B-231601-A-S4080-01787-A-01-1
Figure 1 Satcom Aerowave 100 Maintenance Cable (P/N 985.83.14.226)
Effectivity: see data module page 1 12-B-23-16-01-00A-066A-A
End of data module
UNCLASSIFIED 2020-11-25 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: see data module page 1 12-B-23-16-01-00A-066A-A
UNCLASSIFIED 2020-11-25 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
SATCOM MAINTENANCE CABLE (P/N 985.99.99.634)
AGE AND TOOLS DATA
Applicability: SATCOM AEROWAVE 100; MSN 1720, 2001 - UP
Table of Contents Page
SATCOM MAINTENANCE CABLE (P/N 985.99.99.634) - AGE AND TOOLS DATA................. 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
References
Table 1 References
Data module/Technical publication Title
12-B-23-16-01-00A-066A-A SATCOM MAINTENANCE CABLE (P/N 985.83.14.226) - AGE
AND TOOLS DATA
Description
1 Application
This Satcom maintenance cable is applicable for MSN 1720, 2001 and up. For MSN 545, 1001 thru 1719, 1721
thru 1942, refer to TEM 12-B-23-16-01-00A-066A-A.
The Satcom maintenance cable is a Y shape cable loom with a 9 pin D-Sub connector and a RJ-45 connector at
one end and an MIL D 38999 connector at the other end. It can be used to connect the Satcom system to a
computer for maintenance.
2 Dimensions
Length (maximum) 2030 mm (79.92 in).
3 Mass
0,25 kg (0.55 lb).
Effectivity: see data module page 1 12-B-23-16-01-00A-066B-A
UNCLASSIFIED 2020-11-25 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
4 Level/Use
Servicing.
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
- 985.99.99.634 Maintenance cable 1
Effectivity: see data module page 1 12-B-23-16-01-00A-066B-A
End of data module
UNCLASSIFIED 2020-11-25 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
BATTERY CHARGER/ANALYZER (P/N 110.85.07.410)
AGE AND TOOLS DATA
Applicability: NICKEL/CADMIUM BATTERIES
Table of Contents Page
BATTERY CHARGER/ANALYZER (P/N 110.85.07.410) - AGE AND TOOLS DATA................. 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Battery Charger / Analyzer (P/N 110.85.07.410).................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The charger/analyzer comprises a charging unit, a battery condition analyzer and a service kit for nickel/cadmium
batteries. It can charge or analyze the condition of a single cell or complete battery. Input power is 110/220 Volt -
50/60 Hz.
Effectivity: see data module page 1 12-B-24-00-01-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-240001-A-S4080-30028-A-01-1
Figure 1 Battery Charger / Analyzer (P/N 110.85.07.410)
Effectivity: see data module page 1 12-B-24-00-01-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
STARTER/GEN QAD ADAPTOR WRENCH SOCKET (P/N 513.24.09.025)
AGE AND TOOLS DATA
Table of Contents Page
STARTER/GEN QAD ADAPTOR WRENCH SOCKET (P/N 513.24.09.025) - AGE AND 1
TOOLS DATA..............................................................................................................................
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Start / Gen Qad Adapter Wrench Socket (P/N 513.24.09.025).............................. 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This socket wrench is used for starter / generator QAD adapter removal / installation in conjunction with a 1/4"
ratchet.
Effectivity: ALL 12-B-24-00-01-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-240002-A-S4080-30029-A-01-1
Figure 1 Start / Gen Qad Adapter Wrench Socket (P/N 513.24.09.025)
Effectivity: ALL 12-B-24-00-01-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
SARSAT BEACON TESTER (P/N 990.00.00.211)
AGE AND TOOLS DATA
Table of Contents Page
SARSAT BEACON TESTER (P/N 990.00.00.211) - AGE AND TOOLS DATA........................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 2
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Sarsat Beacon Tester (P/N 990.00.00.211)............................................................ 3
References
Table 1 References
Data module/Technical publication Title
12-B-25-63-01-00A-066B-A SARSAT BEACON TESTER (P/N 990.00.00.215) - AGE AND
TOOLS DATA
Description
1 Application
This tester is superseded by P/N 990.00.00.215, refer to TEM 12-B-25-63-01-00A-066B-A.
The sarsat beacon tester is used to test the emergency locator transmitter (ELT). The tester can check that the ELT
transmission signal on 406 MHz is within tolerance and also gives an independent check of the ELT coding.
The beacon tester has these features:
− Receives and de-codes all types of COSPAS and SARSAT beacon signals
− Audible indication of 121.5 MHz operation
− Radiated signal or 50 Ohms direct input option (via 30dB pad)
− Serial data output to printer or PC
− Independent check of serial number and call sign
Effectivity: ALL 12-B-25-63-01-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
− Measure 406 MHz carrier frequency
− Easily up-datable software / database of country codes
− Long message and location protocols included
− 121 and 406 MHz power measurement
− Large backlit LCD screen
− Re-chargeable battery
− Integral serial output
− Mains charger
− Splash-proof carrying case.
2 Dimensions
195 mm x 87 mm x 52 mm.
(7.68 in x 3.43 in x 2.05 in).
3 Mass
0,54 kg.
(1.2 lbs).
4 Level/Use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
1 990.00.00.211 Sarsat beacon tester 1
Effectivity: ALL 12-B-25-63-01-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-256301-A-S4080-79356-A-01-1
Figure 1 Sarsat Beacon Tester (P/N 990.00.00.211)
Effectivity: ALL 12-B-25-63-01-00A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-25-63-01-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
SARSAT BEACON TESTER (P/N 990.00.00.215)
AGE AND TOOLS DATA
Table of Contents Page
SARSAT BEACON TESTER (P/N 990.00.00.215) - AGE AND TOOLS DATA........................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 2
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Sarsat Beacon Tester P/N 990.00.00.215.............................................................. 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The sarsat beacon tester is used to test the emergency locator transmitter (ELT). The tester can check that the ELT
transmission signal on 406 MHz is within tolerance and also gives an independent check of the ELT coding.
The beacon tester has these features:
− Receives and de-codes all types of COSPAS and SARSAT beacon signals
− Audible indication of 121.5 MHz operation
− Radiated signal or 50 Ohms direct input option (via 30dB pad)
− Serial data output to printer or PC
− Independent check of serial number and call sign
− Measure 406 MHz carrier frequency
− Easily up-datable software / database of country codes
Effectivity: ALL 12-B-25-63-01-00A-066B-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
− Long message and location protocols included
− 121 and 406 MHz power measurement
− Large backlit LCD screen
− Re-chargeable battery
− Integral serial output
− Mains charger
− Splash-proof carrying case.
2 Dimensions
195 mm x 87 mm x 52 mm.
(7.68 in x 3.43 in x 2.05 in).
3 Mass
0,54 kg.
(1.2 lbs).
4 Level/Use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
Figure 1 [1] 990.00.00.215 Sarsat beacon tester 1
Effectivity: ALL 12-B-25-63-01-00A-066B-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
406MHz BEACON TESTER
F1 F2 F3 F4
1
A B C D E F G H I
1 2 3
J K L M N O P Q R
4 5 6
S T U V W X Y Z
7 8 9
A B C
DELETE
0 ENTER
12-A-256301-A-S4080-79353-A-01-1
Figure 1 Sarsat Beacon Tester P/N 990.00.00.215
Effectivity: ALL 12-B-25-63-01-00A-066B-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-25-63-01-00A-066B-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
ULTRASONIC TEST SET - TS500 (P/N 990.00.00.266)
AGE AND TOOLS DATA
Table of Contents Page
ULTRASONIC TEST SET - TS500 (P/N 990.00.00.266) - AGE AND TOOLS DATA................. 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Ultrasonic Test Set TS500...................................................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The TS500 ultrasonic test set is used to test the Underwater Locator Beacon (ULB) in its installed position. It has a
9 V battery, a digital display, internal microphone, LED indicator and loudspeaker. The test set checks that the ULB
transmission signal on 8,8 kHz or 37,5 kHz is within tolerance, it also checks battery voltage of the ULB. The test
set requires calibration at 15 month intervals.
2 Dimensions
84 mm x 165 mm x 30 mm (3.3 in x 6.5 in x 1.2 in)
Effectivity: ALL 12-B-25-63-04-00A-066A-A
UNCLASSIFIED 2018-05-24 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
0,368 kg (0.81 lbs)
4 Level/Use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each
assembly
Figure 1 [1] 990.00.00.266 Ultrasonic Test Set (TS500) 1
- Local Supply 9 V Battery (NEDA Type1604A) 1
12-B-256304-A-S4080-01352-A-01-1
Figure 1 Ultrasonic Test Set TS500
Effectivity: ALL 12-B-25-63-04-00A-066A-A
End of data module
UNCLASSIFIED 2018-05-24 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
TURNBUCKLE FIX TOOL (P/N 513.27.24.258)
AGE AND TOOLS DATA
Table of Contents Page
TURNBUCKLE FIX TOOL (P/N 513.27.24.258) - AGE AND TOOLS DATA.............................. 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Turnbuckle fix tool (513.27.24.258)........................................................................ 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The Turnbuckle fix tool prevents the autopilot cables (rudder and elevator) from turning when the turnbuckle has to
be adjusted.
2 Dimensions
None.
3 Mass
0.228 kg (0.502 lbs).
Effectivity: ALL 12-B-27-00-00-00A-066A-A
UNCLASSIFIED 2020-05-15 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
4 Level/Use
Servicing.
5 Parts List
Effectivity: ALL 12-B-27-00-00-00A-066A-A
UNCLASSIFIED 2020-05-15 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
21-A-272000-A-S4080-01991-A-01-1
Figure 1 Turnbuckle fix tool (513.27.24.258)
Effectivity: ALL 12-B-27-00-00-00A-066A-A
End of data module
UNCLASSIFIED 2020-05-15 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-27-00-00-00A-066A-A
UNCLASSIFIED 2020-05-15 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
RIGGING PIN (P/N 110.85.07.050)
AGE AND TOOLS DATA
Table of Contents Page
RIGGING PIN (P/N 110.85.07.050) - AGE AND TOOLS DATA.................................................. 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Rigging Pin (P/N 110.85.07.050)............................................................................ 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This pin is used during adjustment / test of the aileron, elevator and rudder.
It is also used for adjustment of the cargo door.
Effectivity: ALL 12-B-27-10-03-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
110.85.07.050
12-A-271001-A-S4080-30031-A-01-1
Figure 1 Rigging Pin (P/N 110.85.07.050)
Effectivity: ALL 12-B-27-10-03-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
TENSIOMETER (P/N 110.85.07.242)
AGE AND TOOLS DATA
Table of Contents Page
TENSIOMETER (P/N 110.85.07.242) - AGE AND TOOLS DATA.............................................. 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Tensiometer (P/N 110.85.07.242)........................................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This tensiometer is used for measuring control cable tension when rigging the flight controls.
Effectivity: ALL 12-B-27-10-03-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
100
ER
CABLE TENSIOMET
0
90
10
80
20
70
30
60
40 50
12-A-271002-A-S4080-30032-A-01-1
Figure 1 Tensiometer (P/N 110.85.07.242)
Effectivity: ALL 12-B-27-10-03-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
TENSIOMETER (P/N 903.70.31.504)
AGE AND TOOLS DATA
Table of Contents Page
TENSIOMETER (P/N 903.70.31.504) - AGE AND TOOLS DATA.............................................. 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Tensiometer P/N 903.70.31.504............................................................................. 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The tensiometer is used to measure the control cable tension. It has a digital display which can be set to read in
pounds, kilograms or Newtons. The display also shows the set cable size and the battery charge level.
2 Dimensions
205 mm x 86 mm x 34 mm (8.08 in x 3.37 in x 1.34 in)
3 Mass
0,7 kg (1.5 lb) approximately
Effectivity: 12-B-27-10-03-02A-066B-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
4 Level/use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
1 903.70.31.504 Tensiometer
- Carry case 1
- Power supply 1
- User manual 1
Effectivity: 12-B-27-10-03-02A-066B-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
32.5
LBS
1/8" CABLE
1. 32 2. 32
3. 32 4. 32
5. 32 AVG 32
OFF ON
ESC ENTER
ZERO
MEMORY
HOLD TO CLEAR
12-A-271003-A-S4080-30039-A-01-1
Figure 1 Tensiometer P/N 903.70.31.504
Effectivity: 12-B-27-10-03-02A-066B-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: 12-B-27-10-03-02A-066B-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
RIGGING PIN (P/N 110.85.07.252)
AGE AND TOOLS DATA
Table of Contents Page
RIGGING PIN (P/N 110.85.07.252) - AGE AND TOOLS DATA.................................................. 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Rigging Pin (P/N 110.85.07.252)............................................................................ 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This pin is used to lock the aileron cable segment in the center fuselage during rigging.
Effectivity: ALL 12-B-27-10-03-03A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
110.85.07.252
12-A-271003-A-S4080-30033-A-01-1
Figure 1 Rigging Pin (P/N 110.85.07.252)
Effectivity: ALL 12-B-27-10-03-03A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
RIGGING PIN (P/N 513.27.12.050)
AGE AND TOOLS DATA
Table of Contents Page
RIGGING PIN (P/N 513.27.12.050) - AGE AND TOOLS DATA................................................. 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Rigging Pin (P/N 513.27.12.050)............................................................................ 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This pin is used to lock the aileron bellcrank in the neutral position during flight control rigging. Two of these pins
are needed to do the flight control rigging.
Effectivity: ALL 12-B-27-10-03-04A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
513.27.12.050
12-A-271004-A-S4080-30034-A-01-1
Figure 1 Rigging Pin (P/N 513.27.12.050)
Effectivity: ALL 12-B-27-10-03-04A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
RIGGING BLOCK ASSEMBLY (P/N 513.27.12.075)
AGE AND TOOLS DATA
Table of Contents Page
RIGGING BLOCK ASSEMBLY (P/N 513.27.12.075) - AGE AND TOOLS DATA....................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Rigging Block Assy (P/N 513.27.12.075)............................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This block assembly is used for locking the control column in the elevator / aileron neutral position during flight
control rigging.
Effectivity: 12-B-27-10-03-05A-066B-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-271005-A-S4080-30035-A-01-1
Figure 1 Rigging Block Assy (P/N 513.27.12.075)
Effectivity: 12-B-27-10-03-05A-066B-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
RUDDER BALANCING ADAPTOR (P/N 513.27.12.051)
AGE AND TOOLS DATA
Table of Contents Page
RUDDER BALANCING ADAPTOR (P/N 513.27.12.051) - AGE AND TOOLS DATA................. 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Rudder Balancing Adapter (P/N 513.27.12.051).................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
Use this adapter when you balance the rudder.
Effectivity: ALL 12-B-27-20-03-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-270001-A-S4080-30030-A-01-1
Figure 1 Rudder Balancing Adapter (P/N 513.27.12.051)
Effectivity: ALL 12-B-27-20-03-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
RIGGING PIN (P/N 513.27.72.001)
AGE AND TOOLS DATA
Table of Contents Page
RIGGING PIN (P/N 513.27.72.001) - AGE AND TOOLS DATA................................................. 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Rigging Pin (P/N 513.27.72.001)............................................................................ 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This pin is used to lock the elevator control lever during flight control rigging.
Effectivity: ALL 12-B-27-30-03-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
513.27.72.001
12-A-273001-A-S4080-30036-A-01-1
Figure 1 Rigging Pin (P/N 513.27.72.001)
Effectivity: ALL 12-B-27-30-03-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
FCWU MAINTENANCE UTILITY DISC (P/N 513.27.12.001)
AGE AND TOOLS DATA
Table of Contents Page
FCWU MAINTENANCE UTILITY DISC (P/N 513.27.12.001) - AGE AND TOOLS DATA.......... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 FCWU Maintenance Utility Disc (P/N 513.27.12.001)............................................ 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
Used for flap system maintenance.
Effectivity: ALL 12-B-27-50-10-02A-066B-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-275010-A-S4080-30085-A-01-1
Figure 1 FCWU Maintenance Utility Disc (P/N 513.27.12.001)
Effectivity: ALL 12-B-27-50-10-02A-066B-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
FCWU MAINTENANCE UTILITY DISC (P/N 513.27.12.002)
AGE AND TOOLS DATA
Table of Contents Page
FCWU MAINTENANCE UTILITY DISC (P/N 513.27.12.002) - AGE AND TOOLS DATA.......... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 FCWU Maintenance Utility Disc (P/N 513.27.12.002)............................................ 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
Used for flap system maintenance.
Effectivity: ALL 12-B-27-50-10-02A-066C-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-275010-A-S4080-30089-A-01-1
Figure 1 FCWU Maintenance Utility Disc (P/N 513.27.12.002)
Effectivity: ALL 12-B-27-50-10-02A-066C-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
GREASE GUN (P/N 904.21.01.103)
AGE AND TOOLS DATA
Table of Contents Page
GREASE GUN (P/N 904.21.01.103) - AGE AND TOOLS DATA................................................ 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Grease Gun (P/N 904.21.01.103)........................................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This grease gun is used to lubricate the flap screw actuators. Telescopic hand grease gun with 120 cm capacity.
Effectivity: ALL 12-B-27-50-10-03A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-275010-A-S4080-30083-A-01-1
Figure 1 Grease Gun (P/N 904.21.01.103)
Effectivity: ALL 12-B-27-50-10-03A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
TEMPLATE (P/N 513.27.12.066)
AGE AND TOOLS DATA
Table of Contents Page
TEMPLATE (P/N 513.27.12.066) - AGE AND TOOLS DATA..................................................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Template (P/N 513.27.12.066)................................................................................ 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This template is used to check the bend radius of the flex shaft.
Effectivity: ALL 12-B-27-50-10-04A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
FLEXSHAFT BEND
RADIUS TEMPLATE
12-A-275004-A-S4080-30080-A-01-1
Figure 1 Template (P/N 513.27.12.066)
Effectivity: ALL 12-B-27-50-10-04A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
BACKLASH MEASURING TOOL (P/N 978.73.20.902)
AGE AND TOOLS DATA
Applicability: BLACK COLORED FLAP ACTUATORS
Table of Contents Page
BACKLASH MEASURING TOOL (P/N 978.73.20.902) - AGE AND TOOLS DATA................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Backlash Measuring Tool (P/N 978.73.20.902)...................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This tool is used to do the backlash check on the flap actuators that are colored black.
Effectivity: see data module page 1 12-B-27-50-10-06A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-275006-A-S4080-30082-A-01-1
Figure 1 Backlash Measuring Tool (P/N 978.73.20.902)
Effectivity: see data module page 1 12-B-27-50-10-06A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
BOOSTER PUMP INSTALLATION TOOL (P/N 513.28.12.004)
AGE AND TOOLS DATA
Applicability: BLACK COLORED FLAP ACTUATORS
Table of Contents Page
BOOSTER PUMP INSTALLATION TOOL (P/N 513.28.12.004) - AGE AND TOOLS DATA...... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
2 Parts list - Booster pump installation tool............................................................... 2
Index of Figures Page
1 Booster pump installation tool (P/N 513.28.12.004)............................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This booster pump installation tool is used to holt the electrical connector of the booster pump in position during
removal/installation.
2 Dimensions
62,28 x 49,08 x 25 mm (2.452 x 1.932 x 0.984 in).
Effectivity: see data module page 1 12-B-28-20-01-01A-066A-A
UNCLASSIFIED 2021-07-08 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
106 g (0.234 lb).
4 Level/Use
Servicing.
5 Parts List
Table 2 Parts list - Booster pump installation tool
Fig ref Part Number Nomenclature Units for each assembly
Fig. 1 513.28.12.004 Booster pump installation -
tool
Effectivity: see data module page 1 12-B-28-20-01-01A-066A-A
UNCLASSIFIED 2021-07-08 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-B-283001-A-S4080-03629-A-01-1
Figure 1 Booster pump installation tool (P/N 513.28.12.004)
Effectivity: see data module page 1 12-B-28-20-01-01A-066A-A
End of data module
UNCLASSIFIED 2021-07-08 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: see data module page 1 12-B-28-20-01-01A-066A-A
UNCLASSIFIED 2021-07-08 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
SIMPLIFIED SCI READER SOFTWARE (P/N 513.28.12.001)
AGE AND TOOLS DATA
Applicability: MSN 545, 1001-1719 and 1721-1942
Table of Contents Page
SIMPLIFIED SCI READER SOFTWARE (P/N 513.28.12.001) - AGE AND TOOLS DATA........ 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
References
Table 1 References
Data module/Technical publication Title
12-B-28-40-10-01A-066B-A SIMPLIFIED SCI READER SOFTWARE (P/N 513.28.12.002)
Description
1 Application
MSN 545, 1001-1719 and 1721-1942
The Simplified SCI Reader software is used on a computer to troubleshoot fuel indication problems. It interrogates
the Fuel Control and Monitoring Unit and is connected to the aircraft Maintenance Panel with the FCMC SCI
Interface cable.
The software is available pre-loaded on CDROM (P/N 513.28.12.001).
Note
The software is Windows 7, 32-bit compatible. For Windows 7 and 10 with 32-bit and 64-bit operating systems, refer
to TEM 12-B-28-40-10-01A-066B-A.
2 Dimensions
Effectivity: see data module page 1 12-B-28-40-10-01A-066A-A
UNCLASSIFIED 2021-07-08 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
4 Level/use
Troubleshooting
5 Parts List
Fig - ref Part No. Nomenclature Units for each as-
sembly
- 513.28.12.001 Simplified SCI Reader Software 1
Effectivity: see data module page 1 12-B-28-40-10-01A-066A-A
End of data module
UNCLASSIFIED 2021-07-08 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
SCI INTERFACE USB CABLE (P/N 990.00.00.856)
AGE AND TOOLS DATA
Table of Contents Page
SCI INTERFACE USB CABLE (P/N 990.00.00.856) - AGE AND TOOLS DATA........................ 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 SCI Interface USB Cable........................................................................................ 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The SCI Interface USB cable connects a computer to the aircraft Maintenance Panel. It is used with the Simplified
SCI Reader software to troubleshoot fuel indication problems.
2 Dimensions
TBD
3 Mass
TBD
Effectivity: ALL 12-B-28-40-10-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
4 Level/use
Troubleshooting
5 Parts List
Not applicable
Effectivity: ALL 12-B-28-40-10-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-B-284010-A-S4080-20040-A-01-1
Figure 1 SCI Interface USB Cable
Effectivity: ALL 12-B-28-40-10-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-28-40-10-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
SIMPLIFIED SCI READER SOFTWARE (P/N 513.28.12.002)
AGE AND TOOLS DATA
Applicability: MSN 545, 1001-1719 and 1721-1942
Table of Contents Page
SIMPLIFIED SCI READER SOFTWARE (P/N 513.28.12.002) - AGE AND TOOLS DATA........ 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 2
3 Mass....................................................................................................................... 2
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Simplified SCI Reader Software (P/N 513.28.12.002)............................................ 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
MSN 545, 1001-1719 and 1721-1942
The Simplified SCI Reader software is used on a computer to troubleshoot fuel indication problems. It interrogates
the Fuel Control and Monitoring Unit and is connected to the aircraft Maintenance Panel with the FCMC SCI
Interface cable.
The software is available pre-loaded on CDROM (P/N 513.28.12.002).
Note
The software is Windows 7 and 10, 32-bit and 64-bit compatible.
Effectivity: see data module page 1 12-B-28-40-10-01A-066B-A
UNCLASSIFIED 2021-07-08 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
2 Dimensions
3 Mass
4 Level/use
Troubleshooting.
5 Parts List
Fig - ref Part No. Nomenclature Units for each as-
sembly
Fig. 1 513.28.12.002 Simplified SCI Reader Software MRO 1
Effectivity: see data module page 1 12-B-28-40-10-01A-066B-A
UNCLASSIFIED 2021-07-08 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-B-284010-A-S4080-79361-A-01-1
Figure 1 Simplified SCI Reader Software (P/N 513.28.12.002)
Effectivity: see data module page 1 12-B-28-40-10-01A-066B-A
End of data module
UNCLASSIFIED 2021-07-08 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: see data module page 1 12-B-28-40-10-01A-066B-A
UNCLASSIFIED 2021-07-08 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
SIMPLIFIED SCI READER SOFTWARE (P/N 513.28.12.003)
AGE AND TOOLS DATA
Applicability: MSN 1720, 2001 and UP
Table of Contents Page
SIMPLIFIED SCI READER SOFTWARE (P/N 513.28.12.003) - AGE AND TOOLS DATA........ 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 2
3 Mass....................................................................................................................... 2
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Simplified SCI Reader Software (P/N 513.28.12.003)............................................ 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
MSN 1720, 2001 and UP
The Simplified SCI Reader software is used on a computer to troubleshoot fuel indication problems. It interrogates
the Fuel Control and Monitoring Unit and is connected to the aircraft Maintenance Panel with the FCMC SCI
Interface cable.
The software is available pre-loaded on CDROM (P/N 513.28.12.003).
Note
The software is Windows 7 and Windows10, 32-bit and 64-bit compatible.
Effectivity: see data module page 1 12-B-28-40-10-01A-066C-A
UNCLASSIFIED 2021-07-08 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
2 Dimensions
3 Mass
4 Level/use
Troubleshooting.
5 Parts List
Fig - ref Part No. Nomenclature Units for each as-
sembly
Fig. 1 513.28.12.003 Simplified SCI Reader Software MRO 1
Effectivity: see data module page 1 12-B-28-40-10-01A-066C-A
UNCLASSIFIED 2021-07-08 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-B-284010-A-S4080-02032-A-01-1
Figure 1 Simplified SCI Reader Software (P/N 513.28.12.003)
Effectivity: see data module page 1 12-B-28-40-10-01A-066C-A
End of data module
UNCLASSIFIED 2021-07-08 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: see data module page 1 12-B-28-40-10-01A-066C-A
UNCLASSIFIED 2021-07-08 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
OAT SIMULATOR (P/N 513.30.12.004)
AGE AND TOOLS DATA
Table of Contents Page
OAT SIMULATOR (P/N 513.30.12.004) - AGE AND TOOLS DATA........................................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 2
3 Mass....................................................................................................................... 2
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
2 Parts list - OAT simulator (P/N 513.30.12.004)....................................................... 2
Index of Figures Page
1 OAT simulator......................................................................................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This OAT simulator is used in place of the OAT sensors during maintenance to set the mode of operation to the
system. Two are required.
The correct function of the OAT simulator can be checked with a resistance measuring device. The resistance
values shown below, can be measured on the plug in the temperature positions that follow:
− -21°C = 91.8 Ohm ±0.2 Ohm
− -8°C = 96.9 Ohm ±0.2 Ohm
− +5°C = 102 Ohm ±0.2 Ohm
− +15°C = 105.9 Ohm ±0.2 Ohm.
Effectivity: ALL 12-B-30-60-03-01A-066B-A
UNCLASSIFIED 2021-07-08 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
2 Dimensions
3 Mass
4 Level/use
Servicing
5 Parts List
Table 2 Parts list - OAT simulator (P/N 513.30.12.004)
Fig ref Part Number Nomenclature Units for each assembly
Fig. 1 513.30.12.004 OAT simulator -
Effectivity: ALL 12-B-30-60-03-01A-066B-A
UNCLASSIFIED 2021-07-08 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-306003-A-S4080-01012-A-02-1
Figure 1 OAT simulator
Effectivity: ALL 12-B-30-60-03-01A-066B-A
End of data module
UNCLASSIFIED 2021-07-08 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-30-60-03-01A-066B-A
UNCLASSIFIED 2021-07-08 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
OAT SIMULATOR (P/N 513.30.12.007)
AGE AND TOOLS DATA
Table of Contents Page
OAT SIMULATOR (P/N 513.30.12.007) - AGE AND TOOLS DATA........................................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 2
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
2 Parts list - OAT simulator (P/N 513.30.12.007)....................................................... 2
Index of Figures Page
1 OAT simulator......................................................................................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This OAT simulator is used in place of the OAT sensors during maintenance to set the mode of operation to the
system. Two are required.
The correct function of the OAT simulator can be checked with a resistance measuring device. The resistance
values shown below, can be measured on the plug in the temperature positions that follow:
− -21°C = 91.8 Ohm ±0.2 Ohm
− -8°C = 96.9 Ohm ±0.2 Ohm
− +5°C = 102 Ohm ±0.2 Ohm
− +15°C = 105.9 Ohm ±0.2 Ohm.
Effectivity: ALL 12-B-30-60-03-01A-066C-A
UNCLASSIFIED 2021-07-08 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
2 Dimensions
3 Mass
100 g (3.53 oz)
4 Level/Use
Servicing
5 Parts List
Table 2 Parts list - OAT simulator (P/N 513.30.12.007)
Fig ref Part Number Nomenclature Units for each assembly
Fig. 1 513.30.12.007 OAT simulator -
Effectivity: ALL 12-B-30-60-03-01A-066C-A
UNCLASSIFIED 2021-07-08 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-306003-A-S4080-02166-A-01-1
Figure 1 OAT simulator
Effectivity: ALL 12-B-30-60-03-01A-066C-A
End of data module
UNCLASSIFIED 2021-07-08 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-30-60-03-01A-066C-A
UNCLASSIFIED 2021-07-08 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
PROPELLER DE-ICE TEST SET (P/N 985.99.99.631)
AGE AND TOOLS DATA
Table of Contents Page
PROPELLER DE-ICE TEST SET (P/N 985.99.99.631) - AGE AND TOOLS DATA................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Propeller De-ice Test Set (P/N 985.99.99.631)...................................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The propeller de-ice test set P/N 985.99.99.631 is used to do:
− An operational test of the propeller de-ice system (for normal maintenance checks)
− A functional test of the propeller de-ice system (to aid troubleshooting and when in-depth testing is necessary).
During the test procedures, the test set is electrically connected between the propeller de-ice timer and the aircraft
wiring harness.
2 Dimensions
1067 x 103 x 59 mm (42 x 4.01 x 2.32 in)
Effectivity: ALL 12-B-30-60-04-01A-066A-A
UNCLASSIFIED 2018-05-24 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
0,6 kg (1.32 lb)
4 Level/Use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each
assembly
1 985.99.99.631 Propeller De-ice Test Set 1
Effectivity: ALL 12-B-30-60-04-01A-066A-A
UNCLASSIFIED 2018-05-24 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-306004-A-S4080-01440-A-01-1
Figure 1 Propeller De-ice Test Set (P/N 985.99.99.631)
Effectivity: ALL 12-B-30-60-04-01A-066A-A
End of data module
UNCLASSIFIED 2018-05-24 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-30-60-04-01A-066A-A
UNCLASSIFIED 2018-05-24 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
FRED FILE (P/N 531.30.12.023)
AGE AND TOOLS DATA
Table of Contents Page
FRED FILE (P/N 531.30.12.023) - AGE AND TOOLS DATA...................................................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/use................................................................................................................ 1
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The Flight Recorder Electronic Documentation (FRED) file gives a data map of the stored LDR flight data for crash
investigation authorities. The FRED file is supplied on CD-ROM.
2 Dimensions
TBD
3 Mass
0,055 kg
4 Level/use
Aircraft with Primus APEX software Build 7 and L3 Model LDR1000 LDR.
Effectivity: LDR 12-B-31-30-10-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
- 531.30.12.023 CVFDR FRED file 1
Effectivity: LDR 12-B-31-30-10-00A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
FRED FILE (P/N 531.30.12.027)
AGE AND TOOLS DATA
Table of Contents Page
FRED FILE (P/N 531.30.12.027) - AGE AND TOOLS DATA...................................................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/use................................................................................................................ 1
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The Flight Recorder Electronic Documentation (FRED) file gives a data map of the stored LDR flight data for crash
investigation authorities. The FRED file is supplied on CD-ROM.
2 Dimensions
TBD
3 Mass
0,055 kg
4 Level/use
Aircraft with Primus APEX software Build 8 and L3 Model LDR1000 LDR.
Effectivity: LDR 12-B-31-30-10-00A-066B-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
- 531.30.12.027 CVFDR FRED file 1
Effectivity: LDR 12-B-31-30-10-00A-066B-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
FRED FILE (P/N 531.30.12.029)
AGE AND TOOLS DATA
Table of Contents Page
FRED FILE (P/N 531.30.12.029) - AGE AND TOOLS DATA...................................................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/Use................................................................................................................ 1
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The Flight Recorder Electronic Documentation (FRED) file gives a data map of the stored LDR flight data for crash
investigation authorities. The FRED file is supplied on CD-ROM.
2 Dimensions
120 mm (4.7 in).
3 Mass
0,055 kg (0.121 lb).
4 Level/Use
Aircraft with Primus APEX software Builds 10 and 11 and higher and L3 Model LDR1000LDR.
Effectivity: LDR 12-B-31-30-10-00A-066C-A
UNCLASSIFIED 2018-11-29 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
5 Parts List
Fig. ref Part No Nomenclature Units for each assembly
- 531.30.12.029 FRED file 1
Effectivity: LDR 12-B-31-30-10-00A-066C-A
End of data module
UNCLASSIFIED 2018-11-29 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
FRED FILE (P/N 531.30.12.032)
AGE AND TOOLS DATA
Table of Contents Page
FRED FILE (P/N 531.30.12.032) - AGE AND TOOLS DATA...................................................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/Use................................................................................................................ 1
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The Flight Recorder Electronic Documentation (FRED) file gives a data map of the stored Leightweight Data
Recorder (LDR) flight data for data processing. The FRED file is supplied on CD-ROM and also stored on the
actual LDR unit.
2 Dimensions
120 mm (4.7 in).
3 Mass
0,055 kg (0.121 lb).
4 Level/Use
Aircraft with Primus APEX software Builds 12 and up and L3 Model LDR1000.
Effectivity: LDR 12-B-31-30-10-00A-066D-A
UNCLASSIFIED 2019-11-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
5 Parts List
Fig. ref Part No Nomenclature Units for each assembly
- 531.30.12.032 FRED file 1
Effectivity: LDR 12-B-31-30-10-00A-066D-A
End of data module
UNCLASSIFIED 2019-11-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
CVFDR AND ACMS DATA ANALYSIS TOOLS (P/N 513.31.12.002)
AGE AND TOOLS DATA
Applicability: L-3 LDR1000 LDR and APEX Build 6 or higher.
Table of Contents Page
CVFDR AND ACMS DATA ANALYSIS TOOLS (P/N 513.31.12.002) - AGE AND TOOLS 1
DATA...........................................................................................................................................
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 2
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 CVFDR and ACMS Data Analysis Tools Disc (P/N 513.31.12.002)....................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The software tools on the disc are used to convert and analyze the data recorded by the LDR and the ACMS. The
analyzed data is used for fault finding or operational performance assessment.
The software tools are applicable for analysis of the data files from the following sources:
− LDR data files from the L-3 Communications LDR1000 data recorder
− ACMS data files from APEX Build 6 or higher.
This file can be processed after downloading from the LDR:
− ARINC 717.
These files can be processed after downloading from the ACMS:
Effectivity: see data module page 1 12-B-31-30-10-01A-066A-A
UNCLASSIFIED 2018-11-29 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
− Aircraft data log file
− Navigation and air data log file
− Engine data log file.
2 Dimensions
120 mm (4.7 in).
3 Mass
0,055 kg (0.121 lb).
4 Level/Use
The software is installed on a PC or laptop. After downloading LDR files and/or the ACMS files, the data is
processed with the software at the aircraft location or away from the aircraft. Refer to the document Guidelines for
the Processing of ACMS and CVFDR Data (ECC-12-TM-13-001) for information on how the software is used. The
guideline document is located on the disc. The disc also has the ICD files necessary to process LDR data, which
was recorded with APEX Builds 7 or 8.
Effectivity: see data module page 1 12-B-31-30-10-01A-066A-A
UNCLASSIFIED 2018-11-29 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-B-313010-A-S4080-00021-A-01-1
Figure 1 CVFDR and ACMS Data Analysis Tools Disc (P/N 513.31.12.002)
Effectivity: see data module page 1 12-B-31-30-10-01A-066A-A
End of data module
UNCLASSIFIED 2018-11-29 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: see data module page 1 12-B-31-30-10-01A-066A-A
UNCLASSIFIED 2018-11-29 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
ACMS AND LDR DATA ANALYSIS DISC (P/N 513.31.12.003)
AGE AND TOOLS DATA
Table of Contents Page
ACMS AND LDR DATA ANALYSIS DISC (P/N 513.31.12.003) - AGE AND TOOLS DATA....... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 2
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
Index of Tables Page
1 References............................................................................................................. 1
References
Table 1 References
Data module/Technical publication Title
12-B-31-30-01-00A-090A-A ACMS AND LDR DATA PROCESSING GUIDE - SOFTWARE
DOCUMENTATION
Description
1 Application
The software tools on the disc are used to convert and analyze the data recorded by the LDR and the ACMS. The
analyzed data is used for fault finding or operational performance assessment.
The software tools are applicable for analysis of the data files from the following sources:
− LDR data files from the L-3 Communications LDR1000 data recorder
− ACMS data files from APEX Build 6 or higher.
This file can be processed after downloading from the LDR:
− ARINC 717.
These files can be processed after downloading from the ACMS:
− Aircraft data log file
− Navigation and air data log file
− Engine data log file.
Effectivity: LDR 12-B-31-30-10-01A-066B-A
UNCLASSIFIED 2018-11-29 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
2 Dimensions
120 mm (4.7 in).
3 Mass
0,055 kg (0.121 lb).
4 Level/Use
The software is installed on a PC or laptop. After downloading LDR files and/or the ACMS files, the data is
processed with the software at the aircraft location or away from the aircraft. Refer to the document Guide for the
Processing of ACMS and LDR Data (Doc. No. 02403) for information on how the software is used. The guideline
document is located in the AMM 12-B-31-30-01-00A-090A-A.
Effectivity: LDR 12-B-31-30-10-01A-066B-A
End of data module
UNCLASSIFIED 2018-11-29 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
HYDRAULIC BEADBREAKER (P/N 990.00.02.101)
AGE AND TOOLS DATA
Table of Contents Page
HYDRAULIC BEADBREAKER (P/N 990.00.02.101) - AGE AND TOOLS DATA....................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Hydraulic Beadbreaker (P/N 990.00.02.101).......................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This item is used for tire changing in conjunction with an adapter ring. It is suitable for tire rim diameters 20 cm (8
in.) to 51 cm (20 in.). The telescoping legs are adjustable for tire widths.
Effectivity: ALL 12-B-32-00-01-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-320001-A-S4080-30041-A-01-1
Figure 1 Hydraulic Beadbreaker (P/N 990.00.02.101)
Effectivity: ALL 12-B-32-00-01-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
TIRE RING 9 INCH (P/N 990.00.02.107)
AGE AND TOOLS DATA
Table of Contents Page
TIRE RING 9 INCH (P/N 990.00.02.107) - AGE AND TOOLS DATA......................................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Tire Ring 9 in. (P/N 990.00.02.107)........................................................................ 2
References
Table 1 References
Data module/Technical publication Title
12-B-32-00-01-01A-066A-A HYDRAULIC BEADBREAKER (P/N 990.00.02.101) – AGE
AND TOOLS DATA
Description
1 Application
This adapter ring (size 9 in.) is used, in conjunction with the Hydraulic Tire Beadbreaker P/N 990.00.02.101 (Ref.
12-B-32-00-01-01A-066A-A), for nose tire changing.
Effectivity: ALL 12-B-32-00-01-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-320002-A-S4080-30042-A-01-1
Figure 1 Tire Ring 9 in. (P/N 990.00.02.107)
Effectivity: ALL 12-B-32-00-01-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
TIRE RING 13 INCH (P/N 990.00.02.105)
AGE AND TOOLS DATA
Table of Contents Page
TIRE RING 13 INCH (P/N 990.00.02.105) - AGE AND TOOLS DATA....................................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Tire Ring 13 in. (P/N 990.00.02.105)...................................................................... 2
References
Table 1 References
Data module/Technical publication Title
12-B-32-00-01-01A-066A-A HYDRAULIC BEADBREAKER (P/N 990.00.02.101) – AGE
AND TOOLS DATA
Description
1 Application
This adapter ring (size 13 in.) is used, in conjunction with the Hydraulic Tire Beadbreaker P/N 990.00.02.101 (Ref.
12-B-32-00-01-01A-066A-A), for main tire changing.
Effectivity: ALL 12-B-32-00-01-03A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-320003-A-S4080-30043-A-01-1
Figure 1 Tire Ring 13 in. (P/N 990.00.02.105)
Effectivity: ALL 12-B-32-00-01-03A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
ADJUSTMENT TOOL (P/N 513.32.12.057)
AGE AND TOOLS DATA
Table of Contents Page
ADJUSTMENT TOOL (P/N 513.32.12.057) - AGE AND TOOLS DATA..................................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Adjustment Tool (P/N 513.32.12.057)..................................................................... 2
References
Table 1 References
Data module/Technical publication Title
12-B-32-10-04-03A-066A-A PROXIMITY SWITCH TEST BOX (P/N 985.99.99.602) – AGE
AND TOOLS DATA
Description
1 Application
This tool is used to adjust the weight-on-wheels proximity switches. It can also be used in conjunction with the
Proximity Switch Test Box P/N 985.99.99.602 (Ref. 12-B-32-10-04-03A-066A-A), for a functional check.
Effectivity: ALL 12-B-32-10-04-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
ADJUST
TEST
12-A-321001-A-S4080-30044-A-01-1
Figure 1 Adjustment Tool (P/N 513.32.12.057)
Effectivity: ALL 12-B-32-10-04-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
NITROGEN TROLLEY (P/N 990.00.00.701)
AGE AND TOOLS DATA
Table of Contents Page
NITROGEN TROLLEY (P/N 990.00.00.701) - AGE AND TOOLS DATA.................................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Nitrogen Trolley (P/N 990.00.00.701)..................................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This trolley is used to charge various nitrogen systems. It is supplied with four, 40-liter nitrogen bottles and a high
pressure booster. Maximum supply pressure is 250 bar (3600 PSI). It has a towing arm on the front and a drag
coupling at the rear.
2 Dimensions
TBD
3 Mass
TBD
Effectivity: ALL 12-B-32-10-04-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
4 Level/use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
1- 990.00.00.701 Nitrogen trolley -
10
MP
H/
16
kph
429
Figure 1 Nitrogen Trolley (P/N 990.00.00.701)
Effectivity: ALL 12-B-32-10-04-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
PROXIMITY SWITCH TEST BOX (P/N 985.99.99.602)
AGE AND TOOLS DATA
Table of Contents Page
PROXIMITY SWITCH TEST BOX (P/N 985.99.99.602) - AGE AND TOOLS DATA.................. 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Proximity Switch – Test Box (P/N 985.99.99.602).................................................. 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This test box is for testing and adjusting the proximity switches, it can also be used for the maximum pressure test
of the hydraulic system power pack.
Effectivity: ALL 12-B-32-10-04-03A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
+
E
xt
er
28
na
lP
V
Pro
ow
D
-
C
er
x imi
ty s
LA WI
wit
S
M TC
P H
ch
O O
N K
Te
=
st-
Bo
x
LA WI
S
M TC
P H
O O
N K
=
P to
re T
ss e
st
La lb
B
u
m
p
12-A-321003-A-S4080-30045-A-01-1
Figure 1 Proximity Switch – Test Box (P/N 985.99.99.602)
Effectivity: ALL 12-B-32-10-04-03A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
LANDING GEAR TOOL KIT (P/N 513.32.12.002)
AGE AND TOOLS DATA
Table of Contents Page
LANDING GEAR TOOL KIT (P/N 513.32.12.002) - AGE AND TOOLS DATA............................ 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/use................................................................................................................ 2
5 Parts list.................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Landing Gear Tool Kit (P/N 513.32.12.002)............................................................ 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This tool kit is used for on aircraft landing gear shock absorber repairs and off aircraft landing gear repairs.
2 Dimensions
TBD
3 Mass
TBD
Effectivity: ALL 12-B-32-10-04-04A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
4 Level/use
Repair
5 Parts list
Fig ref Part No Nomenclature Units for each assembly
1 513.32.12.002 Landing gear tool kit
906.08.11.435 Case 1
513.32.12.111 Special spanner 1
513.32.12.059 Aluminum angle 1
513.32.12.060 Piston extractor 1
513.32.12.061 Pin extractor 1
513.32.12.062 Sealing ring inserter 1
513.32.12.063 Rubber guide 1
513.32.12.064 Spanner 87mm 1
513.32.12.065 Spanner 69mm 1
513.32.12.066 Holder 66mm 1
513.32.12.072 Bushing extractor 1
513.32.12.073 Bushing extractor 1
513.32.12.074 Extracting tool 1
513.32.12.105 Seal shroud MLG 1
513.32.12.106 Seal shroud NLG 1
513.32.12.107 Leak test cup assy 1
Effectivity: ALL 12-B-32-10-04-04A-066A-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-B-321004-A-S4080-01072-A-01-1
Figure 1 Landing Gear Tool Kit (P/N 513.32.12.002)
Effectivity: ALL 12-B-32-10-04-04A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-32-10-04-04A-066A-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
DIGITAL FORCE GAGE (P/N 903.70.32.921)
AGE AND TOOLS DATA
Table of Contents Page
DIGITAL FORCE GAGE (P/N 903.70.32.921) - AGE AND TOOLS DATA................................. 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Digital Force Gage (P/N 903.70.32.921)................................................................ 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This force gauge has a capacity of 0-200 lbs / 0-100 kgF / 0-1000 N and an accuracy +/- 0.5% of full scale. The
resolution is 0.2 lb. / 0.1 kgF / 1 N. Powered by 9 volt battery or the included 220 Volt AC adapter. The aluminium
housing is reversible for hand-held use or for test stand mounting. Automatic peak memory with recall for tensile
and comprehensive loads, auto-shutoff, push button calibration.
2 Dimensions
270 x 185 x 80 mm
Effectivity: ALL 12-B-32-20-07-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
1,10 kg (2.42 lbs)
4 Level/use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
1- 903.70.32.921 Digital force gage -
Battery 9V 1
220 VAC adaptor 1
Hook adaptor 10-32F thread 1
Flat adaptor 10-32F thread 1
Adaptor 5/16-18M to 10-32F thread 1
Extension rod 5 in long, 10-32F thread 1
User guide 1
National Institute of Standards and Technol- 1
ogy (NIST) certificate
426
Figure 1 Digital Force Gage (P/N 903.70.32.921)
Effectivity: ALL 12-B-32-20-07-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
DIGITAL FORCE GAGE P/N 903.70.32.924
AGE AND TOOLS DATA
Table of Contents Page
DIGITAL FORCE GAGE P/N 903.70.32.924 - AGE AND TOOLS DATA.................................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Digital Force Gage P/N 903.70.32.924................................................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This force gage has a capacity of 0-200 lbs / 0-100 kgF / 0-1000 N and an accuracy +/- 0.3% of full scale. Powered
by a rechargeable NiMH battery pack or the included universal charger. The cast aluminium housing allows for
hand-held use or for test stand mounting. Automatic peak memory with recall for tensile and comprehensive loads,
auto-shutoff, push button calibration.
2 Dimensions
190,6 x 72,6 x 41,1 mm (instrument only)
Effectivity: ALL 12-B-32-20-07-01A-066B-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
0,70 kg (1.5lbs) instrument weight
1,8 kg (4.0 lbs) with accessories
4 Level/use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
1- 903.70.32.924 Digital force gage -
- Universal charger 120/240V with US, UK 1
and Euro style plug
- Hook adaptor 5/16 -18 1
- Flat adaptor 5/16-18 1
- Extension rod 6 in long 1
- Handle assembly 1
- User guide 1
- Certificate of Conformance 1
- Carrying case 1
Effectivity: ALL 12-B-32-20-07-01A-066B-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-322007-A-S4080-30052-A-01-1
Figure 1 Digital Force Gage P/N 903.70.32.924
Effectivity: ALL 12-B-32-20-07-01A-066B-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-32-20-07-01A-066B-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
FORK (P/N 513.32.12.047)
AGE AND TOOLS DATA
Table of Contents Page
FORK (P/N 513.32.12.047) - AGE AND TOOLS DATA.............................................................. 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Fork (P/N 513.32.12.047)....................................................................................... 2
References
Table 1 References
Data module/Technical publication Title
12-B-32-20-07-01A-066A-A DIGITAL FORCE GAGE (P/N 903.70.32.921) – AGE AND
TOOLS DATA
Description
1 Application
This fork is used together with push/pull gauge P/N 903.70.32.920 or digital force gauge P/N 903.70.32.921 (Ref.
12-B-32-20-07-01A-066A-A) for adjusting the force of the NLG spring strut.
Effectivity: ALL 12-B-32-20-07-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-322002-A-S4080-30046-A-01-1
Figure 1 Fork (P/N 513.32.12.047)
Effectivity: ALL 12-B-32-20-07-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
COMPRESSION TOOL (P/N 513.32.12.052)
AGE AND TOOLS DATA
Table of Contents Page
COMPRESSION TOOL (P/N 513.32.12.052) - AGE AND TOOLS DATA.................................. 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Compression Tool (P/N 513.32.12.052)................................................................. 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This compression tool is used for removal / installation of the NLG spring strut.
Effectivity: ALL 12-B-32-20-07-03A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-322003-A-S4080-30047-A-01-1
Figure 1 Compression Tool (P/N 513.32.12.052)
Effectivity: ALL 12-B-32-20-07-03A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
TORQUE WRENCH ADAPTOR (P/N 904.10.89.227)
AGE AND TOOLS DATA
Table of Contents Page
TORQUE WRENCH ADAPTOR (P/N 904.10.89.227) - AGE AND TOOLS DATA..................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Torque Wrench Adapter (P/N 904.10.89.227)........................................................ 2
References
Table 1 References
Data module/Technical publication Title
12-B-61-10-02-01A-066A-A TORQUE WRENCH SET (P/N 904.10.89.136) – AGE AND
TOOLS DATA
Description
1 Application
This adapter is used during removal/installation of the main landing gear in conjunction with Torque Wrench P/N
904.10.89.136 (Ref. 12-B-61-10-02-01A-066A-A).
Effectivity: ALL 12-B-32-30-06-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-323001-A-S4080-30048-A-01-1
Figure 1 Torque Wrench Adapter (P/N 904.10.89.227)
Effectivity: ALL 12-B-32-30-06-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
WRENCH (P/N 904.10.08.228)
AGE AND TOOLS DATA
Table of Contents Page
WRENCH (P/N 904.10.08.228) - AGE AND TOOLS DATA........................................................ 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Wrench (P/N 904.10.08.228).................................................................................. 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This wrench is used during removal/installation of the main landing gear.
Effectivity: ALL 12-B-32-30-06-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-323002-A-S4080-30049-A-01-1
Figure 1 Wrench (P/N 904.10.08.228)
Effectivity: ALL 12-B-32-30-06-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
TEST BOX (P/N 513.32.12.023)
AGE AND TOOLS DATA
Table of Contents Page
TEST BOX (P/N 513.32.12.023) - AGE AND TOOLS DATA...................................................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Test Box P/N 513.32.12.023................................................................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The Test Box connects to the landing gear actuators. It allows for servicing and troubleshooting of the landing gear
actuators.
2 Dimensions
TBD
3 Mass
0,982 kg
(2.16 lb)
Effectivity: 12-B-32-30-06-05A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
4 Level/Use
Servicing and troubleshooting.
5 Parts List
Fig ref. Part No. Nomenclature Units for each As-
sembly
- 513.32.12.023 Test box Ref
Effectivity: 12-B-32-30-06-05A-066A-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-B-323006-A-S4080-79012-A-01-1
Figure 1 Test Box P/N 513.32.12.023
Effectivity: 12-B-32-30-06-05A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: 12-B-32-30-06-05A-066A-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
BRAKE BLEEDING RIG (P/N 990.00.00.160)
AGE AND TOOLS DATA
Table of Contents Page
BRAKE BLEEDING RIG (P/N 990.00.00.160) - AGE AND TOOLS DATA................................. 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Brake Bleeding Rig (P/N 990.00.00.160)............................................................... 2
References
Table 1 References
Data module/Technical publication Title
12-B-32-40-07-02A-066A-A BRAKE BLEEDING ADAPTOR KIT (P/N 990.00.00.161) –
AGE AND TOOLS DATA
Description
1 Application
This rig is used for bleeding and replenishing the hydraulic brake system. Shop air is required. An Adapter Kit P/N
990.00.00.161 (Ref. 12-B-32-40-07-02A-066A-A), for all Pilatus aircraft, is included.
Effectivity: ALL 12-B-32-40-07-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-324001-A-S4080-30050-A-01-1
Figure 1 Brake Bleeding Rig (P/N 990.00.00.160)
Effectivity: ALL 12-B-32-40-07-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
BRAKE BLEEDING ADAPTOR KIT (P/N 990.00.00.161)
AGE AND TOOLS DATA
Table of Contents Page
BRAKE BLEEDING ADAPTOR KIT (P/N 990.00.00.161) - AGE AND TOOLS DATA................ 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Brake Bleeding Adapter Kit (P/N 990.00.00.161)................................................... 2
References
Table 1 References
Data module/Technical publication Title
12-B-32-40-07-01A-066A-A BRAKE BLEEDING RIG (P/N 990.00.00.160) – AGE AND
TOOLS DATA
Description
1 Application
This adapter kit is used for bleeding and replenishing the hydraulic brake system. It fits all Pilatus aircraft and is
included in the Brake Bleeding Rig P/N 990.00.00.160 (Ref. 12-B-32-40-07-01A-066A-A).
Effectivity: ALL 12-B-32-40-07-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-324002-A-S4080-30051-A-01-1
Figure 1 Brake Bleeding Adapter Kit (P/N 990.00.00.161)
Effectivity: ALL 12-B-32-40-07-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
SOCKET (P/N 904.10.62.141)
AGE AND TOOLS DATA
Table of Contents Page
SOCKET (P/N 904.10.62.141) - AGE AND TOOLS DATA......................................................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Socket (P/N 904.10.62.141)................................................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This socket (50 mm) is used for removal / installation of the main wheel nut.
Effectivity: ALL 12-B-32-40-07-03A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-324003-A-S4080-30052-A-01-1
Figure 1 Socket (P/N 904.10.62.141)
Effectivity: ALL 12-B-32-40-07-03A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
SOCKET (P/N 904.10.62.131)
AGE AND TOOLS DATA
Table of Contents Page
SOCKET (P/N 904.10.62.131) - AGE AND TOOLS DATA......................................................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Socket (P/N 904.10.62.131)................................................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This socket (40mm) is used for removal / installation of the nose wheel, in conjunction with a torque meter (250 lbf
in / 28.5 Nm).
Effectivity: ALL 12-B-32-40-07-04A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-324004-A-S4080-30053-A-01-1
Figure 1 Socket (P/N 904.10.62.131)
Effectivity: ALL 12-B-32-40-07-04A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
WRENCH (P/N 904.10.00.038)
AGE AND TOOLS DATA
Table of Contents Page
WRENCH (P/N 904.10.00.038) - AGE AND TOOLS DATA........................................................ 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Wrench (P/N 904.10.00.038).................................................................................. 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This wrench (38 mm) is used for removal / installation of the nose wheel.
Effectivity: ALL 12-B-32-40-07-05A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-324005-A-S4080-30054-A-01-1
Figure 1 Wrench (P/N 904.10.00.038)
Effectivity: ALL 12-B-32-40-07-05A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
TORQUE WRENCH (P/N 904.10.89.120)
AGE AND TOOLS DATA
Table of Contents Page
TORQUE WRENCH (P/N 904.10.89.120) - AGE AND TOOLS DATA........................................ 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Torque Wrench (P/N 904.10.89.120)...................................................................... 2
References
Table 1 References
Data module/Technical publication Title
12-B-32-40-07-08A-066A-A TORQUE WRENCH ADAPTOR (P/N 904.10.89.186) – AGE
AND TOOLS DATA
Description
1 Application
This torque wrench is used in conjunction with the Adapter P/N 904.10.89.186 (Ref. 12-B-32-40-07-08A-066A-A),
to torque the nuts on the brake units.
Effectivity: ALL 12-B-32-40-07-06A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-324006-A-S4080-30055-A-01-1
Figure 1 Torque Wrench (P/N 904.10.89.120)
Effectivity: ALL 12-B-32-40-07-06A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
TORQUE WRENCH (P/N 904.10.89.142)
AGE AND TOOLS DATA
Table of Contents Page
TORQUE WRENCH (P/N 904.10.89.142) - AGE AND TOOLS DATA........................................ 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Torque wrench (P/N 904.10.89.142)....................................................................... 2
References
Table 1 References
Data module/Technical publication Title
12-B-32-40-07-08A-066B-A TORQUE WRENCH ADAPTOR (P/N 513.32.12.117) – AGE
AND TOOLS DATA
Description
1 Application
This torque wrench is used in conjunction with the Adapter P/N 513.32.12.117 (Ref. 12-B-32-40-07-08A-066B-A),
to torque the nuts on the brake units.
Effectivity: ALL 12-B-32-40-07-06A-066B-A
UNCLASSIFIED 2020-11-25 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-324007-A-S4080-02100-A-01-1
Figure 1 Torque wrench (P/N 904.10.89.142)
Effectivity: ALL 12-B-32-40-07-06A-066B-A
End of data module
UNCLASSIFIED 2020-11-25 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
TORQUE WRENCH ADAPTOR (P/N 904.10.89.186)
AGE AND TOOLS DATA
Table of Contents Page
TORQUE WRENCH ADAPTOR (P/N 904.10.89.186) - AGE AND TOOLS DATA..................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Torque Wrench Adapter (P/N 904.10.89.186)........................................................ 2
References
Table 1 References
Data module/Technical publication Title
12-B-32-40-07-06A-066A-A TORQUE WRENCH (P/N 904.10.89.120) – AGE AND TOOLS
DATA
Description
1 Application
This adapter (1/2 in.) is used in conjunction with the Torque Wrench P/N 904.10.89.120, (Ref. 12-B-32-40-07-06A-
066A-A) to torque the nuts on brake units with steel heat sinks.
Effectivity: ALL 12-B-32-40-07-08A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-324008-A-S4080-30057-A-01-1
Figure 1 Torque Wrench Adapter (P/N 904.10.89.186)
Effectivity: ALL 12-B-32-40-07-08A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
TORQUE WRENCH ADAPTOR (P/N 513.32.12.117)
AGE AND TOOLS DATA
Table of Contents Page
TORQUE WRENCH ADAPTOR (P/N 513.32.12.117) - AGE AND TOOLS DATA..................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Torque wrench adapter (P/N 513.32.12.117).......................................................... 2
References
Table 1 References
Data module/Technical publication Title
12-B-32-40-07-06A-066B-A TORQUE WRENCH (P/N 904.10.89.142) – AGE AND TOOLS
DATA
Description
1 Application
This adapter (1/2 in) is used in conjunction with the Torque Wrench P/N 904.10.89.142, (Ref. 12-B-32-40-07-06A-
066B-A) to torque the nuts on brake units with steel heat sinks.
Effectivity: ALL 12-B-32-40-07-08A-066B-A
UNCLASSIFIED 2020-11-25 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-324007-A-S4080-02102-A-01-1
Figure 1 Torque wrench adapter (P/N 513.32.12.117)
Effectivity: ALL 12-B-32-40-07-08A-066B-A
End of data module
UNCLASSIFIED 2020-11-25 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
WHEEL BALANCER (P/N 990.00.02.109)
AGE AND TOOLS DATA
Table of Contents Page
WHEEL BALANCER (P/N 990.00.02.109) - AGE AND TOOLS DATA....................................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Wheel Balancer (P/N 990.00.02.109)..................................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This unit can balance a wide range of aircraft tires and wheels quickly and accurately. It handles any assembly with
at least a 1 in. axle, up to 35 in. tire diameter. It's made of high grade aluminium for maximum strength and
durability. The balancing mechanism is manufactured to exacting standards, and features an alloy steel shaft and
high tolerance bearings. Comes complete with instructions and starter weight kit.
Effectivity: ALL 12-B-32-40-07-09A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-324009-A-S4080-30086-A-01-1
Figure 1 Wheel Balancer (P/N 990.00.02.109)
Effectivity: ALL 12-B-32-40-07-09A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
SHIMMY DAMPER LEVEL GAUGE ASSEMBLY (P/N 513.32.12.132)
AGE AND TOOLS DATA
Table of Contents Page
SHIMMY DAMPER LEVEL GAUGE ASSEMBLY (P/N 513.32.12.132) - AGE AND TOOLS 1
DATA...........................................................................................................................................
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Shimmy Damper Level Gauge Assembly (P/N 513.32.12.132)............................. 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The shimmy damper level gauge assembly is used during maintenance procedures to do a check of the oil level in
the shimmy damper. The gauge assembly must be removed before flight.
2 Dimensions
3 Mass
0,0350 kg
Effectivity: 12-B-32-50-01-00A-066A-A
UNCLASSIFIED 2019-11-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
0.077 lb
4 Level/use
Servicing
5 Parts List
N/A
Effectivity: 12-B-32-50-01-00A-066A-A
UNCLASSIFIED 2019-11-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-B-325001-A-S4080-01920-A-01-1
Figure 1 Shimmy Damper Level Gauge Assembly (P/N 513.32.12.132)
Effectivity: 12-B-32-50-01-00A-066A-A
End of data module
UNCLASSIFIED 2019-11-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: 12-B-32-50-01-00A-066A-A
UNCLASSIFIED 2019-11-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
MLG FOLDING STRUT GAGE (P/N 513.32.12.114)
AGE AND TOOLS DATA
Applicability: ELECTRO MECHANICAL LANDING GEAR
Table of Contents Page
MLG FOLDING STRUT GAGE (P/N 513.32.12.114) - AGE AND TOOLS DATA....................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 MLG Folding Strut Gage P/N 513.32.12.114.......................................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The setting tool is used to assist with the main landing gear down microswitch adjustment.
2 Dimensions
520 mm x 36 mm x 48,4 mm
20.47 in x 1.41 in x 1.90 in
Effectivity: see data module page 1 12-B-32-60-05-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
0,746 kg
1.998 lb
4 Level/use
Servicing
5 Parts List
N/A
Effectivity: see data module page 1 12-B-32-60-05-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-B-326005-A-S4080-01068-A-01-1
Figure 1 MLG Folding Strut Gage P/N 513.32.12.114
Effectivity: see data module page 1 12-B-32-60-05-00A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: see data module page 1 12-B-32-60-05-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
AIRCRAFT ADAPTOR CABLE (P/N 985.99.99.615)
AGE AND TOOLS DATA
Applicability: ELECTRO MECHANICAL LANDING GEAR
Table of Contents Page
AIRCRAFT ADAPTOR CABLE (P/N 985.99.99.615) - AGE AND TOOLS DATA....................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
Index of Tables Page
1 References............................................................................................................. 1
References
Table 1 References
Data module/Technical publication Title
12-B-32-10-04-03A-066A-A PROXIMITY SWITCH TEST BOX (P/N 985.99.99.602) – AGE
AND TOOLS DATA
12-B-32-60-10-00A-066B-A PROXIMITY SWITCH ADAPTOR CABLE (P/N 985.99.99.616)
– AGE AND TOOLS DATA
Description
1 Application
The adaptor cable is used with the Proximity Switch Test Box (TEM 12-B-32-10-04-03A-066A-A) to connect the
Proximity Switch Test Box to the aircraft.
Another adaptor cable (12-B-32-60-10-00A-066B-A) is needed to connect the Proximity Switch Test Box to the
proximity switch to be tested.
2 Dimensions
TBD
Effectivity: see data module page 1 12-B-32-60-10-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
TBD
4 Level/Use
Servicing and troubleshooting.
Effectivity: see data module page 1 12-B-32-60-10-00A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
PROXIMITY SWITCH ADAPTOR CABLE (P/N 985.99.99.616)
AGE AND TOOLS DATA
Applicability: ELECTRO MECHANICAL LANDING GEAR
Table of Contents Page
PROXIMITY SWITCH ADAPTOR CABLE (P/N 985.99.99.616) - AGE AND TOOLS DATA...... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/Use................................................................................................................ 2
Index of Tables Page
1 References............................................................................................................. 1
References
Table 1 References
Data module/Technical publication Title
12-B-32-10-04-03A-066A-A PROXIMITY SWITCH TEST BOX (P/N 985.99.99.602) – AGE
AND TOOLS DATA
Description
1 Application
The adaptor cable is used to connect the proximity switches on the electro mechanical landing gear to the
Proximity Switch Test Box (TEM 12-B-32-10-04-03A-066A-A).
2 Dimensions
TBD
3 Mass
TBD
Effectivity: see data module page 1 12-B-32-60-10-00A-066B-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
4 Level/Use
Servicing and troubleshooting.
Effectivity: see data module page 1 12-B-32-60-10-00A-066B-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
SAFETY GLASSES
AGE AND TOOLS DATA
Table of Contents Page
SAFETY GLASSES - AGE AND TOOLS DATA.......................................................................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 2
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
Safety glasses are required when the Light Emitting Diode (LED) lights and Intense Pulsed Light (IPL) units are
inspected.
The safety glasses characteristics must:
− Protect against LED and IPL
− Protect for pulsed and continuous wave lasers
− Allow Visible Light Transmission (VLT) of only 5%
− Provide full protection against laser radiation (315 to 1000 nm)
− Provide alignment protection (allows the user to see the beam spot) against laser radiation (520 to 700 nm).
An example product that meets the above characteristics is the Skyline 620.P1005.00 from Laservision.
The relevant country standards for eye protection are:
− ANSI Z87.1 Standard (for USA)
− CSA Z94.3 Standard (for Canada)
− AS/NZS 1337.4 Standard (for Australia/New Zealand)
Effectivity: ALL 12-B-33-00-01-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
− CE EN207 Standard (for Europe).
2 Dimensions
N/A
3 Mass
N/A
4 Level/Use
Servicing
5 Parts List
N/A
Effectivity: ALL 12-B-33-00-01-00A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
PITOT TEST ADAPTOR (P/N 990.00.00.206)
AGE AND TOOLS DATA
Table of Contents Page
PITOT TEST ADAPTOR (P/N 990.00.00.206) - AGE AND TOOLS DATA................................. 1
1 Application.............................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Pilot Test Adapter (P/N 990.00.00.206).................................................................. 3
References
Table 1 References
Data module/Technical publication Title
None
Effectivity: ALL 12-B-34-11-30-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Description
Effectivity: ALL 12-B-34-11-30-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Application
12-A-341101-A-S4080-30058-A-01-1
Effectivity: ALL 12-B-34-11-30-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Figure 1 Pilot Test Adapter (P/N 990.00.00.206)
Effectivity: ALL 12-B-34-11-30-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
STATIC TEST ADAPTOR (P/N 990.00.00.208)
AGE AND TOOLS DATA
Table of Contents Page
STATIC TEST ADAPTOR (P/N 990.00.00.208) - AGE AND TOOLS DATA............................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Static Test Adaptor (P/N 990.00.00.208)................................................................ 2
References
Table 1 References
Data module/Technical publication Title
12-B-34-11-30-01A-066A-A PITOT TEST ADAPTOR (P/N 990.00.00.206) – AGE AND
TOOLS DATA
Description
1 Application
This adapter is used for leak test/calibration of the dual static system. It is used in conjunction with an air data test
set and the Pitot Test Adapter P/N 990.00.00.206 (Ref. 12-B-34-11-30-01A-066A-A).
Effectivity: ALL 12-B-34-11-30-03A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-341130-A-S4080-30061-A-01-1
Figure 1 Static Test Adaptor (P/N 990.00.00.208)
Effectivity: ALL 12-B-34-11-30-03A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
STATIC BLANKING ADAPTOR (P/N 990.00.00.209)
AGE AND TOOLS DATA
Table of Contents Page
STATIC BLANKING ADAPTOR (P/N 990.00.00.209) - AGE AND TOOLS DATA...................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Static Blanking Adaptor (P/N 990.00.00.209)......................................................... 2
References
Table 1 References
Data module/Technical publication Title
12-B-34-11-30-03A-066A-A STATIC TEST ADAPTOR (P/N 990.00.00.208) – AGE AND
TOOLS DATA
Description
1 Application
This adapter is used for leak test/calibration of the dual static system. It is used in conjunction with an air data test
set and the Static Test Adapter P/N 990.00.00.208 (Ref. 12-B-34-11-30-03A-066A-A).
Effectivity: ALL 12-B-34-11-30-04A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-341130-A-S4080-30062-A-01-1
Figure 1 Static Blanking Adaptor (P/N 990.00.00.209)
Effectivity: ALL 12-B-34-11-30-04A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
AIR DATA TEST SET (P/N 990.00.00.225)
AGE AND TOOLS DATA
Table of Contents Page
AIR DATA TEST SET (P/N 990.00.00.225) - AGE AND TOOLS DATA...................................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Air Data Test Set (P/N 990.00.00.225)................................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This fully automated air data test set provides complete pressure and vacuum measuring and control for on-aircraft
sense and leak testing, functional tests of air data instruments, components and systems. It meets the high
accuracy demands of reduced vertical separation minimum (RVSM). It includes a remote hand terminal (option A)
with its 18 m (50 feet) cable which allows easy operation from the cockpit. Color coded AN4 pneumatic connections
for Ps and Pt. Supplied with mating 2 m (6 ft. approx) long flexible hoses with AN4 fittings at one end. A 12 month
recallibration interval is recommended.
2 Dimensions
Length 520 mm (20.5 in)
Width 355 mm (14.0 in)
Effectivity: ALL 12-B-34-11-30-05A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Height 265 mm (10.4.in)
3 Mass
16,5 kg (36.3 lbs)
4 Level/use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
1- 990.00.00.225 Air data test set -
HAND TERMINAL
402
Figure 1 Air Data Test Set (P/N 990.00.00.225)
Effectivity: ALL 12-B-34-11-30-05A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
AIR DATA TEST SET (P/N 990.00.00.240)
AGE AND TOOLS DATA
Table of Contents Page
AIR DATA TEST SET (P/N 990.00.00.240) - AGE AND TOOLS DATA...................................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Air Data Test Set (P/N 990.00.00.240)................................................................... 3
References
Table 1 References
Data module/Technical publication Title
12-B-34-11-30-05A-066D-A AIR DATA TEST SET (P/N 990.00.00.257)
Description
1 Application
This fully automated air data test set provides complete pressure and vacuum measuring and control for on-aircraft
sense and leak testing, functional tests of air data instruments, components and systems. It meets the high
accuracy demands of reduced vertical separation minimum (RVSM). Color coded AN4 pneumatic connections for
Ps and Pt. Supplied with mating 2 m (6 ft. approx) long flexible hoses with AN4 fittings at one end. A 12 month
recalibration interval is recommended.
This test set is superseded by P/N 990.00.00.257, refer to TEM 12-B-34-11-30-05A-066D-A.
2 Dimensions
Length 520 mm (20.5 in)
Width 355 mm (14.0 in)
Effectivity: ALL 12-B-34-11-30-05A-066B-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Height 265 mm (10.4.in)
3 Mass
15,0 kg (33.0 lbs)
4 Level/use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
1- 990.00.00.240 Air data test set -
Effectivity: ALL 12-B-34-11-30-05A-066B-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-B-341130-A-S4080-00007-A-01-1
Figure 1 Air Data Test Set (P/N 990.00.00.240)
Effectivity: ALL 12-B-34-11-30-05A-066B-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-34-11-30-05A-066B-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
AIR DATA TEST SET ADVANCED HAND TERMINAL (P/N 990.00.00.241)
AGE AND TOOLS DATA
Table of Contents Page
AIR DATA TEST SET ADVANCED HAND TERMINAL (P/N 990.00.00.241) - AGE AND 1
TOOLS DATA..............................................................................................................................
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Advanced Hand Terminal P/N 990.00.00.241........................................................ 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
Used with Air Data Test Set ADTS 505 (P/N 990.00.00.240).
The Advanced Hand Terminal connects to the Air Data Test Set ADTS 505 with the supplied 18 m (50 ft) cable to
enable remote operation of the test set.
2 Dimensions
Length 210 mm (8.3 in)
Width 225 mm (8.9 in)
Height 62 mm (2.5.in)
Effectivity: ALL 12-B-34-11-30-05A-066C-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
2,0 kg (4.4 lbs)
4 Level/use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
1- 990.00.00.241 Advanced hand terminal -
Effectivity: ALL 12-B-34-11-30-05A-066C-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-B-341130-A-S4080-00006-A-01-1
Figure 1 Advanced Hand Terminal P/N 990.00.00.241
Effectivity: ALL 12-B-34-11-30-05A-066C-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-34-11-30-05A-066C-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
AIR DATA TEST SET (P/N 990.00.00.257)
AGE AND TOOLS DATA
Table of Contents Page
AIR DATA TEST SET (P/N 990.00.00.257) - AGE AND TOOLS DATA...................................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Air Data Test Set (P/N 990.00.00.257)................................................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This fully automated air data test set provides complete pressure and vacuum measuring and control for on-aircraft
sense and leak testing, functional tests of air data instruments, components and systems. It meets the high
accuracy demands of Reduced Vertical Separation Minimum (RVSM). Color coded AN4 pneumatic connections for
Ps (static) and Pt (pitot). A 12 month recalibration interval is recommended.
2 Dimensions
Depth 425 mm (16.7 in)
Width 525 mm (20.7 in)
Height 300 mm (11.8 in)
Effectivity: ALL 12-B-34-11-30-05A-066D-A
UNCLASSIFIED 2020-05-15 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
20 kg (44 lbs)
4 Level/Use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
1- 990.00.00.257 Air data test set -
Effectivity: ALL 12-B-34-11-30-05A-066D-A
UNCLASSIFIED 2020-05-15 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-B-341130-A-S4080-79260-A-01-1
Figure 1 Air Data Test Set (P/N 990.00.00.257)
Effectivity: ALL 12-B-34-11-30-05A-066D-A
End of data module
UNCLASSIFIED 2020-05-15 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-34-11-30-05A-066D-A
UNCLASSIFIED 2020-05-15 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
DIAL INDICATOR (P/N 903.70.14.807)
AGE AND TOOLS DATA
Table of Contents Page
DIAL INDICATOR (P/N 903.70.14.807) - AGE AND TOOLS DATA............................................ 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Dial Indicator P/N 903.70.14.807............................................................................ 3
References
Table 1 References
Data module/Technical publication Title
12-B-34-11-30-15A-066A-A MOUNTING BLOCK (P/N 513.34.12.010) - AGE AND TOOLS
DATA
Description
1 Application
The dial indicator is used to accurately measure small distances. It is normally used with a mounting block, refer to
TEM 12-B-34-11-30-15A-066A-A.
2 Dimensions
TBD
3 Mass
TBD
Effectivity: ALL 12-B-34-11-30-10A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
4 Level/Use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
Figure 1 [1] 903.70.14.807 Dial indicator 1
Effectivity: ALL 12-B-34-11-30-10A-066A-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-341130-A-S4080-79354-A-01-1
Figure 1 Dial Indicator P/N 903.70.14.807
Effectivity: ALL 12-B-34-11-30-10A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-34-11-30-10A-066A-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
MOUNTING BLOCK (P/N 513.34.12.010)
AGE AND TOOLS DATA
Table of Contents Page
MOUNTING BLOCK (P/N 513.34.12.010) - AGE AND TOOLS DATA....................................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Mounting Block (P/N 513.34.12.010)...................................................................... 3
References
Table 1 References
Data module/Technical publication Title
12-B-34-11-30-10A-066A-A DIAL INDICATOR (P/N 903.70.14.807) - AGE AND TOOLS
DATA
Description
1 Application
The mounting block is used with a dial indicator to accurately measure small distances (for the dial indicator details,
refer to TEM 12-B-34-11-30-10A-066A-A).
2 Dimensions
70,2 mm x 35,0 mm x 25,4 mm
(2.76 in x 1.38 in x 1.0 in)
Effectivity: ALL 12-B-34-11-30-15A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
0,045 kg.
(0.1 lbs).
4 Level/Use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
Figure 1 [1] 513.34.12.010 Mounting block 1
Effectivity: ALL 12-B-34-11-30-15A-066A-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
DIAL INDICATOR
12-A-341130-A-S4080-79355-A-01-1
Figure 1 Mounting Block (P/N 513.34.12.010)
Effectivity: ALL 12-B-34-11-30-15A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-34-11-30-15A-066A-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
COMPASS SWING TROLLEY (P/N 513.34.09.019)
AGE AND TOOLS DATA
Table of Contents Page
COMPASS SWING TROLLEY (P/N 513.34.09.019) - AGE AND TOOLS DATA........................ 1
1 Application.............................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Compass Swing Trolley (P/N 513.34.09.019)......................................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Effectivity: ALL 12-B-34-21-02-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Description
Effectivity: ALL 12-B-34-21-02-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Application
Y
LE 9
OL .01
G
IN
W
TR .09
S
S
4
S
M
P3.3
A
51
O
C
12-A-342102-A-S4080-30061-A-01-1
Effectivity: ALL 12-B-34-21-02-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Figure 1 Compass Swing Trolley (P/N 513.34.09.019)
Effectivity: ALL 12-B-34-21-02-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
COMPASS SWING TROLLEY (P/N 513.34.09.029)
AGE AND TOOLS DATA
Table of Contents Page
COMPASS SWING TROLLEY (P/N 513.34.09.029) - AGE AND TOOLS DATA........................ 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Compass Swing Trolley (P/N 513.34.09.029)......................................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The compass swing trolley is used to support the aircraft nosewheel during a compass swing. The castoring
compass swing trolley wheels allow the aircraft to be turned around one mainwheel.
2 Dimensions
500 mm x 535,2 mm x 173 mm
(19.68 in x 21.07 in x 6.81 in)
3 Mass
18,322 kg
Effectivity: ALL 12-B-34-21-02-02A-066B-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
(40.393 lb)
4 Level/Use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each as-
sembly
1 513.34.09.029 Trolley, compass swing -
Effectivity: ALL 12-B-34-21-02-02A-066B-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-342102-A-S4080-79366-A-01-1
Figure 1 Compass Swing Trolley (P/N 513.34.09.029)
Effectivity: ALL 12-B-34-21-02-02A-066B-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-34-21-02-02A-066B-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
SUB–D CABLE (P/N 990.00.01.201)
AGE AND TOOLS DATA
Table of Contents Page
SUB–D CABLE (P/N 990.00.01.201) - AGE AND TOOLS DATA............................................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Sub–D Cable (P/N 990.00.01.201)......................................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This Sub-D cable (a standard 9 pin Sub-D or RS 232 cable) is used with a computer to do the following
maintenance:
− Flap system set procedure, assymetry monitor test and flap twist monitor test
− ADAHRS alignment check
− EGPWS and MHAS configuration module programming
The cable connects the computer to the Maintenance Box (connector J1 or J4).
Effectivity: ALL 12-B-34-57-05-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-345702-A-S4080-30063-A-01-1
Figure 1 Sub–D Cable (P/N 990.00.01.201)
Effectivity: ALL 12-B-34-57-05-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
WRENCH, OXYGEN ADAPTOR, COCKPIT (P/N 513.35.12.050)
AGE AND TOOLS DATA
Table of Contents Page
WRENCH, OXYGEN ADAPTOR, COCKPIT (P/N 513.35.12.050) - AGE AND TOOLS DATA.. 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Wrench – Oxygen Adapters, Cockpit (P/N 513.35.12.050).................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This wrench is used for removal / installation of the oxygen adapters in the cockpit.
Effectivity: ALL 12-B-35-10-03-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-351001-A-S4080-30064-A-01-1
Figure 1 Wrench – Oxygen Adapters, Cockpit (P/N 513.35.12.050)
Effectivity: ALL 12-B-35-10-03-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
WRENCH – OXYGEN ADAPTOR, CABIN (P/N 513.35.12.051)
AGE AND TOOLS DATA
Table of Contents Page
WRENCH – OXYGEN ADAPTOR, CABIN (P/N 513.35.12.051) - AGE AND TOOLS DATA..... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Wrench – Oxygen Adapters, Cabin (P/N 513.35.12.051)....................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This wrench is used for removal / installation of the oxygen adapters in the cabin.
Effectivity: ALL 12-B-35-20-05-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-352001-A-S4080-30065-A-01-1
Figure 1 Wrench – Oxygen Adapters, Cabin (P/N 513.35.12.051)
Effectivity: ALL 12-B-35-20-05-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
MAINTENANCE TEST BOX (P/N 985.99.99.610)
AGE AND TOOLS DATA
Table of Contents Page
MAINTENANCE TEST BOX (P/N 985.99.99.610) - AGE AND TOOLS DATA........................... 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Maintenance test box (P/N 985.99.99.610)............................................................ 2
References
Table 1 References
Data module/Technical publication Title
12-B-45-00-01-00A-066B-A MAINTENANCE TEST BOX (P/N 985.99.99.638) - AGE AND
TOOLS DATA
Description
The maintenance test box P/N 985.99.99.610 is no longer available. An alternative maintenance test box is P/N
985.99.99.638, refer to TEM 12-B-45-00-01-00A-066B-A.
The maintenance test box is used for maintenance procedures on the following aircraft systems:
− the Air/Ground system
− the DC generation system
− the flaps system
− the speed and attitude correction system
− the horizontal stabilizer trim system
− the propeller
− the Environmental Control System
The test box also has outputs for RS232 and ARINC signals from:
− ADAHARS
− Flaps
− TAWS/TAS
− Stick pusher.
Effectivity: 12-B-45-00-01-00A-066A-A
UNCLASSIFIED 2021-07-08 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
P1
58
P1
54 RS J1
Ro 232
tar OU
y T
Se Switc
J2 lec h
t
RS J4
AD 232
J3 AH OU
RS T
CH
B
P1
3
12-B-450001-A-S4080-00001-A-01-1
Figure 1 Maintenance test box (P/N 985.99.99.610)
Effectivity: 12-B-45-00-01-00A-066A-A
End of data module
UNCLASSIFIED 2021-07-08 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
MAINTENANCE BOX NG (P/N 985.99.99.638)
AGE AND TOOLS DATA
Table of Contents Page
MAINTENANCE BOX NG (P/N 985.99.99.638) - AGE AND TOOLS DATA............................... 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Maintenance Box NG (P/N 985.99.99.638)............................................................ 2
References
Table 1 References
Data module/Technical publication Title
None
Description
The Maintenance Box NG is used for maintenance procedures on the following aircraft systems:
− The Air/Ground system
− The DC generation system
− The flaps system
− The speed and attitude correction system
− The horizontal stabilizer trim system
− The propeller
− The Environmental Control System.
The Maintenance Box NG also has outputs for RS232 and ARINC signals from:
− ADAHRS
− Flaps
− TAWS/TAS
− Stick pusher.
Effectivity: 12-B-45-00-01-00A-066B-A
UNCLASSIFIED 2020-05-15 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-B-450001-A-S4080-02015-A-01-1
Figure 1 Maintenance Box NG (P/N 985.99.99.638)
Effectivity: 12-B-45-00-01-00A-066B-A
End of data module
UNCLASSIFIED 2020-05-15 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
MAINTENANCE BOX UPGRADE KIT (P/N 985.99.99.636)
AGE AND TOOLS DATA
Table of Contents Page
MAINTENANCE BOX UPGRADE KIT (P/N 985.99.99.636) - AGE AND TOOLS DATA............ 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
2 Maintenance box upgrade kit (P/N 985.99.99.636)................................................ 2
Index of Figures Page
1 Maintenance box upgrade kit (P/N 985.99.99.636)................................................ 3
References
Table 1 References
Data module/Technical publication Title
12-B-45-00-01-00A-066A-A MAINTENANCE TEST BOX (P/N 985.99.99.610) - AGE AND
TOOLS DATA
Description
1 Application
This maintenance box upgrade kit is used to upgrade the maintenance box part no. 985.99.99.610 with two
handles for easier transport and for protection of the faceplate switches.
Refer to 12-B-45-00-01-00A-066A-A for more information about the maintenance box.
2 Dimensions
167 mm x 127 mm x 4 mm (6.57 in x 5.00 in x 0.16 in)
Effectivity: 12-B-45-00-01-00A-066C-A
UNCLASSIFIED 2021-07-08 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
116 g (4.09 oz)
4 Level/use
Servicing
5 Parts List
Table 2 Maintenance box upgrade kit (P/N 985.99.99.636)
Fig ref Part No Nomenclature Units for each assembly
Fig. 1 985.99.99.636 Maintenance box upgrade kit
- Handle 2
- Rubber bushing 8
- Screw 22 mm 8
- Installation instruction 1
Effectivity: 12-B-45-00-01-00A-066C-A
UNCLASSIFIED 2021-07-08 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-B-450001-A-S4080-03190-A-01-1
Figure 1 Maintenance box upgrade kit (P/N 985.99.99.636)
Effectivity: 12-B-45-00-01-00A-066C-A
End of data module
UNCLASSIFIED 2021-07-08 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: 12-B-45-00-01-00A-066C-A
UNCLASSIFIED 2021-07-08 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
LAPTOP COMPUTER
AGE AND TOOLS DATA
Table of Contents Page
LAPTOP COMPUTER - AGE AND TOOLS DATA...................................................................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 2
3 Mass....................................................................................................................... 2
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
References
Table 1 References
Data module/Technical publication Title
12-B-45-45-01-00A-066A-A LAN KIT LTEPIC–25 - AGE AND TOOLS DATA
12-B-45-45-01-00A-066B-A LAN KIT LANTAP–10 (P/N 990.00.01.203) - AGE AND TOOLS
DATA
12-B-45-45-01-00A-066C-A LAN KIT (P/N 990.00.01.208) - AGE AND TOOLS DATA
12-B-45-45-01-00A-066D-A LAN KIT 10MBIT (P/N 990.00.01.209) - AGE AND TOOLS DA-
TA
12-B-45-45-01-00A-066E-A USB LAN KIT 100MBIT (P/N 990.00.01.210) - AGE AND
TOOLS DATA
12-B-46-21-00-00A-066A-A APPLE iPAD - AGE AND TOOLS DATA
Description
1 Application
The laptop computer is used to load software and to interface with the Central Maintenance Computer (CMC) for
servicing and troubleshooting. It is connected to the aircraft using a LAN kit (refer to TEM 12-B-45-45-01-00A-
066A-A, 12-B-45-45-01-00A-066B-A, 12-B-45-45-01-00A-066C-A, 12-B-45-45-01-00A-066D-A or 12-B-45-45-01-
00A-066E-A).
For aircraft equipped with the optional wireless data loading system, an Apple iPad can be used to upload
navigation terrain and chart databases, upload flight plans and download maintenance data. TEM 12-B-46-21-00-
00A-066A-A gives details of the iPad requirements.
Effectivity: ALL 12-B-45-45-00-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
The minimum hardware and software standards for the laptop computer are:
− MS Windows XP or later version.
− 40 MB free disc space
− 64 MB RAM
− 233 MHz Pentium processor
− 8X CD ROM
− SVGA monitor
− Built-in Ethernet 100 Base T network interface
If only the LTEPIC-25 LAN KIT is used to connect the laptop to the aircraft:
− Ethernet PCMCIA card slot
− MS Windows XP 32-bit version.
2 Dimensions
TBD
3 Mass
TBD
4 Level/use
Servicing, troubleshooting
5 Parts List
N/A
Effectivity: ALL 12-B-45-45-00-00A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
LAN KIT LTEPIC–25
AGE AND TOOLS DATA
Table of Contents Page
LAN KIT LTEPIC–25 - AGE AND TOOLS DATA......................................................................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 LTEPIC–25 LAN Kit................................................................................................ 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The LAN kit connects a computer to the Maintenance Local Area Network (LAN) to allow you to interface with the
supported aircraft systems.
2 Dimensions
TBD
3 Mass
TBD
Effectivity: LTEPIC-25 12-B-45-45-01-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
4 Level/use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
1 LTEPIC-25 LAN kit
1-1 10Base2 Ethernet PCMCIA card 1
1-2 Adaptor cable, RJ45 to BNC 1
1-3 BNC terminator, 50 Ω 1
1-4 BNC T connector 1
- LAN coaxial cable 1
- Disc, installation drivers 1
Effectivity: LTEPIC-25 12-B-45-45-01-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-B-454501-A-S4080-00006-A-01-1
Figure 1 LTEPIC–25 LAN Kit
Effectivity: LTEPIC-25 12-B-45-45-01-00A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: LTEPIC-25 12-B-45-45-01-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
LAN KIT LANTAP–10 (P/N 990.00.01.203)
AGE AND TOOLS DATA
Table of Contents Page
LAN KIT LANTAP–10 (P/N 990.00.01.203) - AGE AND TOOLS DATA...................................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 LANTAP–10 LAN Kit (P/N 990.00.01.203)............................................................. 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The LAN kit connects a computer to the Maintenance Local Area Network (LAN) to allow you to interface with the
supported aircraft systems.
2 Dimensions
TBD
3 Mass
TBD
Effectivity: LANTAP-10 12-B-45-45-01-00A-066B-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
4 Level/use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
1 990.00.01.203 LAN kit LANTAP-10
10Base2 to 10BaseT converter 1
Coaxial cable, 10 foot 1
USB power cable, 6 foot 1
RJ45 cable, 6 foot 1
BNC T connector 1
BNC terminator, 50 Ω 1
Effectivity: LANTAP-10 12-B-45-45-01-00A-066B-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
USB
ICS L
ANTA 10Bas
P eT
Ether
net
www.ic
saero.
com
12-B-454501-A-S4080-00007-A-01-1
Figure 1 LANTAP–10 LAN Kit (P/N 990.00.01.203)
Effectivity: LANTAP-10 12-B-45-45-01-00A-066B-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: LANTAP-10 12-B-45-45-01-00A-066B-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
LAN KIT (P/N 990.00.01.208)
AGE AND TOOLS DATA
Table of Contents Page
LAN KIT (P/N 990.00.01.208) - AGE AND TOOLS DATA.......................................................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 LAN Kit................................................................................................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The LAN kit connects a computer to the Maintenance Local Area Network (LAN) to allow you to interface with the
supported aircraft systems.
2 Dimensions
TBD
3 Mass
TBD
Effectivity: ALL 12-B-45-45-01-00A-066C-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
4 Level/use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
1 990.00.01.208 PCMCIA LAN kit
1, Fig 1 - PCMCIA card 1
2, Fig 1 - Dongle with 10base2 connector 1
3, Fig 1 - BNC terminator, 50 Ω 1
4, Fig 1 - BNC T connector 1
- - Coaxial cable 1
Effectivity: ALL 12-B-45-45-01-00A-066C-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-B-454501-A-S4080-00006-A-01-1
Figure 1 LAN Kit
Effectivity: ALL 12-B-45-45-01-00A-066C-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-45-45-01-00A-066C-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
LAN KIT 10MBIT (P/N 990.00.01.209)
AGE AND TOOLS DATA
Table of Contents Page
LAN KIT 10MBIT (P/N 990.00.01.209) - AGE AND TOOLS DATA............................................. 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 LAN Kit P/N 990.00.01.209.................................................................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The LAN kit connects a computer to the Maintenance Local Area Network (LAN) to allow you to interface with the
supported aircraft systems.
Note
The LAN cables are straight-wired.
2 Dimensions
TBD
Effectivity: ALL 12-B-45-45-01-00A-066D-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
TBD
4 Level/use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
1 990.00.01.209 LAN kit
- - Media converter RJ45 to BNC, includes: 1
- power supply 110 - 240 VAC input, 5 VDC 1
output
- BNC T connector 1
- - Patch cable coax, BNC, RG58, 50Ω, 6m 1
- - Patch cable U7UTP, RJ45, 0,5m 1
- - USB Y cable 1
- - BNC terminator, 50 Ω 1
- - Universal travel adaptor 1
- - Storage case 1
Effectivity: ALL 12-B-45-45-01-00A-066D-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-B-454501-A-S4080-00009-A-01-1
Figure 1 LAN Kit P/N 990.00.01.209
Effectivity: ALL 12-B-45-45-01-00A-066D-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-45-45-01-00A-066D-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
USB LAN KIT 100MBIT (P/N 990.00.01.210)
AGE AND TOOLS DATA
Table of Contents Page
USB LAN KIT 100MBIT (P/N 990.00.01.210) - AGE AND TOOLS DATA.................................. 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
Note
Only for use on aircraft with updated NIC modules (production installed from MSN 1341 and up, or customer
installed by Service Bulletin 45-007).
Note
The LAN cables are straight-wired.
2 Dimensions
3 Mass
Effectivity: ALL 12-B-45-45-01-00A-066E-A
UNCLASSIFIED 2021-07-08 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
4 Level/use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
- 990.00.01.210 USB LAN kit
- 8-Port Switch, USB-Power 1
- Patch cable RJ45 U/UTP Cat5e 0,5m 1
- Patch cable, 3m 2
- Universal travel adaptor 1
- Storage case 1
Effectivity: ALL 12-B-45-45-01-00A-066E-A
End of data module
UNCLASSIFIED 2021-07-08 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
APPLE iPAD
AGE AND TOOLS DATA
Applicability: ALL ; WIRELESS DATA LOADING SYSTEM (CONNECTED FLIGHT DECK)
Table of Contents Page
APPLE iPAD - AGE AND TOOLS DATA..................................................................................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
References
Table 1 References
Data module/Technical publication Title
12-B-45-45-00-00A-066A-A LAPTOP COMPUTER - AGE AND TOOLS DATA
Description
1 Application
Aircraft equipped with the Wireless Data Loading System (Connected Flight Deck factory option) can use the Apple
iPad to wirelessly interface with the system. The Aspen Connected Gateway CG100P is installed in the aircraft as
part of the Wireless Data Loading System. It acts as a wireless router to establish a wireless connection between
the Apple iPad and the Primus APEX Avionics Suite. The Apple iPad must run the Apple iOS 8 or higher operating
system.
The following dedicated iPad applications must be installed on the Apple iPad to support the functionality described
below. The applications are available in the Apple Store:
iPad Applica- Version Function Subscription
tion
INDS Data 1.3 (1060) Upload the latest navigation, terrain Requires an INDS subscription for a specific
Manager or higher and charts databases to the avionics aircraft registration.
suite. Go to: https://inds.epicinds.com/epic/login
MyCMC 1.3.1 or Download maintenance data (FHDB, No subscription or login required.
higher ACMS) and optionally clear mainte-
nance data (ACMS only) from the
avionics suite.
Effectivity: see data module page 1 12-B-46-21-00-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
iPad Applica- Version Function Subscription
tion
MyGDC 3.5 or high- Flight Planning Tool to create, opti- Requires a Honeywell-ID.
er mize and file flight plans. Stores and Go to: https://www.mygdc.com/new/static/
uploads flight plans to the avionics customer_support.php
suite.
Connected for 2.4.0 or Configure the Aspen Connected Requires an Aspen Installer or User account.
Pilatus higher Gateway CG100P wireless network, Contact an Authorized Pilatus Service Center:
aircraft registration and flight plan Pilatus Switzerland - SupportPC12@pilatus-
loading method. aircraft.com
Pilatus USA - SupportPC12@PilBal.com
Pilatus Australia - SupportPC12@pila-
tus.com.au
MyFlightPath 1.0.1.0 Display a moving map with general No subscription or login required.
flight information to passengers.
If the Wireless Data Loading System is not installed, a laptop computer is used to download maintenance data and
upload databases, refer to TEM 12-B-45-45-00-00A-066A-A.
Effectivity: see data module page 1 12-B-46-21-00-00A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
EDDY CURRENT TEST DEVICE (P/N 990.00.02.181)
AGE AND TOOLS DATA
Table of Contents Page
EDDY CURRENT TEST DEVICE (P/N 990.00.02.181) - AGE AND TOOLS DATA................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 2
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Eddy Current Test Device (P/N 990.00.02.181)..................................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The eddy current test device is used for non-destructive examination and condition monitoring of the aircraft
structure and metallic components.
The eddy current test device has these parts:
− A probe module
− A connectivity module with USB/encoder inputs and TTL outputs
− A lithium ion rechargeable battery pack
− A battery charger
− A transport case.
Effectivity: ALL 12-B-51-00-00-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
2 Dimensions
600 mm x 300 mm x 220 mm
(23.6 in. x 11.8 in. x 8.7 in.)
3 Mass
5,0 kg
(11.0 lbs.)
4 Level/Use
Servicing
5 Parts List
N/A
Effectivity: ALL 12-B-51-00-00-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
21-D-130012-A-S4080-22227-A-01-1
Figure 1 Eddy Current Test Device (P/N 990.00.02.181)
Effectivity: ALL 12-B-51-00-00-00A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-51-00-00-00A-066A-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
ADJUSTMENT KIT (P/N 513.52.12.010)
AGE AND TOOLS DATA
Table of Contents Page
ADJUSTMENT KIT (P/N 513.52.12.010) - AGE AND TOOLS DATA......................................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Cargo Door – Rigging Fixture................................................................................. 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The adjustment kit is used to control the cargo door when adjustment of the door is carried out.
2 Dimensions
TBD
3 Mass
2,388 kg (5.265 lb)
Effectivity: ALL 12-B-52-30-10-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
4 Level/use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each assem-
bly
- 513.52.12.010 Adjustment kit -
1, Fig 1 513.52.12.050 Cargo door adjustment jig 1
2, Fig 1 513.52.12.019 Positioning tool 1
3, Fig 1 513.52.12.020 Snap gauge 1
4, Fig 1 513.52.12.021 Positioning tool 1
5, Fig 1 513.52.12.022 Control gauge 1
6, Fig 1 513.52.12.023 Control gauge 1
7, Fig 1 552.30.12.250 Shim, laminated 10
8, Fig 1 553.14.12.410 Plate, distance 1,6 10
9, Fig 1 553.14.12.411 Plate, distance 0,8 20
10, Fig 1 553.14.12.412 Plate, distance 0,6 20
11, Fig 1 553.14.12.413 Plate, distance 0,5 25
12, Fig 1 553.14.12.414 Plate, distance 0,4 25
13, Fig 1 553.18.12.304 Shim 10
14, Fig 1 553.18.12.473 Shim 10
15, Fig 1 553.18.12.474 Shim 10
16, Fig 1 904.10.86.312 T-bar, drive 3/8" 1
17, Fig 1 904.10.60.840 Socket 11/16", 12 pt, drive 3/8" 1
18, Fig 1 904.10.86.573 Extension, wobble plus, lg 6", drive 3/8" 1
20, Fig 1 903.70.32.930 Pin gauge set 1
21, Fig 1 904.10.86.015 Wrench, crowfoot ratchet 11/16", drive 3/8" 1
22, Fig 1 904.10.86.572 Extension, locking 3/8" drive 1
25, Fig 1 906.08.11.446 Transport box 1
Effectivity: ALL 12-B-52-30-10-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
1 25 5
20
8
7
16
17
6
2
18
21 9 12 11 10 15 14 13
22
12-A-523010-A-S4080-01110-A-01-1
Figure 1 Cargo Door – Rigging Fixture
Effectivity: ALL 12-B-52-30-10-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-52-30-10-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
PLUG WING/FUSELAGE SPANNER SET (P/N 513.24.12.001)
AGE AND TOOLS DATA
Table of Contents Page
PLUG WING/FUSELAGE SPANNER SET (P/N 513.24.12.001) - AGE AND TOOLS DATA..... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Plug Wing/Fuselage Spanner Set (P/N 513.24.12.001)......................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This set is used for removal/installation of the feed-through connectors.
Effectivity: ALL 12-B-57-00-04-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-570001-A-S4080-30066-A-01-1
Figure 1 Plug Wing/Fuselage Spanner Set (P/N 513.24.12.001)
Effectivity: ALL 12-B-57-00-04-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
WING REMOVAL/INSTALLATION KIT (P/N 513.57.12.001)
AGE AND TOOLS DATA
Table of Contents Page
WING REMOVAL/INSTALLATION KIT (P/N 513.57.12.001) - AGE AND TOOLS DATA........... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Wing Removal/Installation Kit (P/N 513.57.12.001)............................................... 3
References
Table 1 References
Data module/Technical publication Title
12-B-57-00-04-05A-066A-A WING REMOVAL/INSTALLATION KIT (P/N 513.57.12.055)
Description
1 Application
MSN 1001 — 1575
This kit is used to remove and install the same left and right wings. It contains the wing lifting sling and the outer
wing adapter which are used to lift the wing. In addition there is a pin removal tool, different mounting tools and
torque adapters necessary to remove and install the wing attachment bolts. All these items are stored in a box.
This kit is superseded by P/N 513.57.12.055, refer to TEM 12-B-57-00-04-05A-066A-A.
2 Dimensions
796 x 558 x 315 mm
31.3 x 21.9 x 12.4 in.
Effectivity: MSN 1001 - 1575 12-B-57-00-04-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
9,3 kg
20.4 lb.
4 Level/Use
Time limited inspections.
5 Parts List
Fig — Ref. Part Number Description Units per assembly
- 513.57.12.001 WING REMOVAL/INSTALLATION KIT -
Effectivity: MSN 1001 - 1575 12-B-57-00-04-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-570002-A-S4080-30087-A-01-1
Figure 1 Wing Removal/Installation Kit (P/N 513.57.12.001)
Effectivity: MSN 1001 - 1575 12-B-57-00-04-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: MSN 1001 - 1575 12-B-57-00-04-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
MEASURING TOOL KIT (P/N 513.57.12.003)
AGE AND TOOLS DATA
Table of Contents Page
MEASURING TOOL KIT (P/N 513.57.12.003) - AGE AND TOOLS DATA................................. 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Measuring Tool (P/N 513.57.12.003)...................................................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This tool is used to measure any damage found in the wing-to-fuselage attachment fitting bores.
2 Dimensions
TBD
3 Mass
TBD
Effectivity: ALL 12-B-57-00-04-03A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
4 Level/use
Inspection
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
1 513.57.12.003 Measuring tool kit -
-906.08.11.424 Box 1
-513.57.12.049 Measuring tool 1
-903.70.33.603 Inspection mirror 1
-903.70.33.605 Mirror holder 1
Effectivity: ALL 12-B-57-00-04-03A-066A-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-570004-A-S4080-30108-A-01-1
Figure 1 Measuring Tool (P/N 513.57.12.003)
Effectivity: ALL 12-B-57-00-04-03A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-57-00-04-03A-066A-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
BUSH REMOVAL/INSTALLATION KIT (P/N 513.57.12.004)
AGE AND TOOLS DATA
Table of Contents Page
BUSH REMOVAL/INSTALLATION KIT (P/N 513.57.12.004) - AGE AND TOOLS DATA........... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Bush Removal/Installation Kit (P/N 513.57.12.004)............................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This tool kit removes and installs the wing to fuselage attachment point bushes. The kit consists of a bush removal
tool with various sized driving bushes and bush installation tools contained in a box.
2 Dimensions
TBD
3 Mass
TBD
Effectivity: 12-B-57-00-04-04A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
4 Level/use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
1 513.57.12.004 Tool kit, bush removal/installation -
906.08.11.433 Box 1
513.57.12.033 Bonding tool, rear spar 2
513.57.12.054 Bush removal tool: 1
-513.57.12.037 Bush 1
-513.57.12.038 Driving bush 1
-513.57.12.039 Distance bush 1
-513.57.12.040 Screwed rod 1
-513.57.12.041 Washer 1
-513.57.12.042 Distance bush 1
-513.57.12.048 Nut 1
-513.57.12.045 Thread bush 1
-513.57.12.046 Thread washer 1
-513.57.12.047 Washer 1
-513.57.12.053 Driving bush 1
-940.83.81.104 Ball bearing 2
Effectivity: 12-B-57-00-04-04A-066A-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Figure 1 Bush Removal/Installation Kit (P/N 513.57.12.004)
Effectivity: 12-B-57-00-04-04A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: 12-B-57-00-04-04A-066A-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
WING REMOVAL/INSTALLATION KIT (P/N 513.57.12.055)
AGE AND TOOLS DATA
Table of Contents Page
WING REMOVAL/INSTALLATION KIT (P/N 513.57.12.055) - AGE AND TOOLS DATA........... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Wing Removal/Installation Kit (P/N 513.57.12.055)............................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
MSN 1001 — 9999
This kit is used to remove and install the same left and right wings. It contains the fuselage jack point installation
kit, the wing lifting sling and the outer wing adapter which are used to jack the fuselage and lift the wing. In addition
there is a pin removal tool, different mounting tools and torque adapters necessary to remove and install the wing
attachment bolts. All these items are stored in a box.
2 Dimensions
796 x 558 x 315 mm
31.3 x 21.9 x 12.4 in.
Effectivity: ALL 12-B-57-00-04-05A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
9,3 kg
20.4 lb.
4 Level/Use
Time limited inspections.
5 Parts List
Fig — Ref. Part Number Description Units per assembly
- 513.57.12.055 WING REMOVAL/INSTALLATION KIT -
- 513.57.12.036 WING LIFTING SLING 1
- 513.57.12.025 PIN REMOVAL TOOL ASSY 1
- 513.57.12.021 MOUNTING CONE, PIN LARGE 1
- 513.57.12.022 MOUNTING BUFFER, PIN LARGE 1
- 513.57.12.023 MOUNTING CONE, PIN SMALL 1
- 513.57.12.024 MOUNTING BUFFER, PIN SMALL 1
- 513.57.12.058 FUSELAGE JACK POINT INSTL KIT MSN 1
1576 – 9999
- 904.10.89.150 TORQUE ADAPTOR SPLINE 9/16” 1
- 904.10.89.151 TORQUE ADAPTOR SPLINE 5/8” 1
- 906.08.11.477 TRANSPORT BOX, WING R/I KIT 1
Effectivity: ALL 12-B-57-00-04-05A-066A-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-570002-A-S4080-30087-A-01-1
Figure 1 Wing Removal/Installation Kit (P/N 513.57.12.055)
Effectivity: ALL 12-B-57-00-04-05A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-57-00-04-05A-066A-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
DYNAMIC BALANCING EQUIPMENT (P/N 513.61.12.002)
AGE AND TOOLS DATA
Table of Contents Page
DYNAMIC BALANCING EQUIPMENT (P/N 513.61.12.002) - AGE AND TOOLS DATA........... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Propeller Dynamic Balancing Equipment (P/N 513.61.12.002).............................. 3
References
Table 1 References
Data module/Technical publication Title
12-B-61-00-01-01A-066B-A DYNAMIC BALANCING EQUIPMENT (P/N 968.29.12.989) –
AGE AND TOOLS DATA
Description
1 Application
This equipment enables on-aircraft propeller dynamic-balancing. Alternative equipment is detailed in TEM 12-B-61-
00-01-01A-066B-A.
2 Dimensions
TBD
3 Mass
TBD
Effectivity: ALL 12-B-61-00-01-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
4 Level/use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
1- 513.61.12.002 Dynamic propeller balance equipment -
- 513.61.12.061 Adaptor kit 1
- 968.29.12.994 Vibrex 2000 balancer 1
13590
- Carrying case 1
13771
- Magnetic pick-up 1
5876
- Velocimeter 1
7310
- Bracket, velocimeter, 0.280 in hole 1
3382-1
- Bracket, velocimeter, 0.380 in hole 1
3383-1
- Cable assy, magnetic pick-up, 25 ft 1
10808-25
- Cable assy, velocimeter, 20 ft 1
11210-20
- Pocket scale 1
11245
- Chart corrector 1
3597
- Chart, universal propeller blance 1
4673
- User guide, Vibrex 2000 1
13841
- Video, Vibrex 2000 training, PAL 1
610-447
- Manual, smooth propeller 1
9511-2
- Calibrator 11A 1
4819-1
- Manual, 11A, Op. and Maint. 1
9077-1
- 513.61.12.062 Placard 1
Effectivity: ALL 12-B-61-00-01-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
404
Figure 1 Propeller Dynamic Balancing Equipment (P/N 513.61.12.002)
Effectivity: ALL 12-B-61-00-01-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-61-00-01-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
DYNAMIC BALANCING EQUIPMENT (P/N 968.29.12.989)
AGE AND TOOLS DATA
Table of Contents Page
DYNAMIC BALANCING EQUIPMENT (P/N 968.29.12.989) - AGE AND TOOLS DATA........... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Dynamic Balancing Equipment P/N 968.29.12.989................................................ 3
References
Table 1 References
Data module/Technical publication Title
12-B-61-00-01-01A-066A-A DYNAMIC BALANCING EQUIPMENT (P/N 513.61.12.002) –
AGE AND TOOLS DATA
Description
1 Application
This equipment enables on-aircraft propeller dynamic-balancing. It is an alternative to the equipment detailed in
TEM 12-B-61-00-01-01A-066A-A, but is supplied without a calibrator.
2 Dimensions
TBD
3 Mass
TBD
Effectivity: ALL 12-B-61-00-01-01A-066B-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
4 Level/use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
1- 968.29.12.989 Vibrex 2000 Plus balancer901- 1
14990
- Carrying case 1
TCC-001
- Magnetic pick-up 1
906-5876
- Velocimeter 1
7310
- Bracket, velocimeter, 0,250 hole 1
3382-1
- Bracket, velocimeter, 0,320 hole 1
3383-1
- Cable assy, magnetic pick-up, 20 ft 1
10808-20
- Cable assy, velocimeter, 20 ft 1
11210-20
- Electronic pocket scale 1
CM 320-1N
- Chart corrector 1
3597
- Propeller protractor 1
13053
- User guide, Vibrex 2000 1
13841-6
- Manual, smooth propeller II 1
768-9511B
- Download program V2K kit 1
915-15164
- Application guide, V2K propeller, Pilatus 1
TAG-V2K-PC
Effectivity: ALL 12-B-61-00-01-01A-066B-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-610001-A-S4080-00898-A-01-1
Figure 1 Dynamic Balancing Equipment P/N 968.29.12.989
Effectivity: ALL 12-B-61-00-01-01A-066B-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-61-00-01-01A-066B-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
DYNAMIC BALANCING ADAPTOR KIT (P/N 513.61.12.061)
AGE AND TOOLS DATA
Table of Contents Page
DYNAMIC BALANCING ADAPTOR KIT (P/N 513.61.12.061) - AGE AND TOOLS DATA......... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Adaptor Kit (P/N 513.61.12.061)............................................................................ 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This kit contains an adapter to hold the magnetic pick up and an interrupter with counterweight, which gives the
signal to the pick up.
Effectivity: ALL 12-B-61-00-01-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-610001-A-S4080-00897-A-01-1
Figure 1 Adaptor Kit (P/N 513.61.12.061)
Effectivity: ALL 12-B-61-00-01-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
TORQUE WRENCH SET (P/N 904.10.89.136)
AGE AND TOOLS DATA
Table of Contents Page
TORQUE WRENCH SET (P/N 904.10.89.136) - AGE AND TOOLS DATA................................ 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Torque Wrench Set (P/N 904.10.89.136)............................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This wrench set is used for torquing the propeller attachment bolts. It contains a torque wrench with quick
adjustment and dual scale (80-400 Nm/60-300 ft.lb), sockets and a square drive insert tool (1/2 in.). The tools are
stored in an aluminium case.
Effectivity: ALL 12-B-61-10-02-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-611001-A-S4080-30067-A-01-1
Figure 1 Torque Wrench Set (P/N 904.10.89.136)
Effectivity: ALL 12-B-61-10-02-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
TORQUE WRENCH SET (P/N 904.10.89.139)
AGE AND TOOLS DATA
Table of Contents Page
TORQUE WRENCH SET (P/N 904.10.89.139) - AGE AND TOOLS DATA................................ 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Torque Wrench Set (P/N 904.10.00.139)............................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This wrench set is used for torquing the propeller attachment bolts. It contains a torque wrench with quick
adjustment and dual scale (40-200 Nm/30-150 ft.lb), sockets and a square drive insert tool (1/2 in.). The tools are
stored in an plastic case.
Effectivity: 12-B-61-10-02-01A-066B-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-611002-A-S4080-00001-A-01-1
Figure 1 Torque Wrench Set (P/N 904.10.00.139)
Effectivity: 12-B-61-10-02-01A-066B-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
SPECIAL SOCKET (P/N 513.61.12.053)
AGE AND TOOLS DATA
Table of Contents Page
SPECIAL SOCKET (P/N 513.61.12.053) - AGE AND TOOLS DATA......................................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Special Socket (P/N 513.61.12.053)...................................................................... 2
References
Table 1 References
Data module/Technical publication Title
12-B-61-10-02-01A-066A-A TORQUE WRENCH SET (P/N 904.10.89.136) – AGE AND
TOOLS DATA
Description
1 Application
This socket is used, in conjunction with Torque Wrench Set P/N 904.10.89.136 (Ref. 12-B-61-10-02-01A-066A-A),
for torquing the propeller attachment bolts.
Effectivity: ALL 12-B-61-10-02-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-611002-A-S4080-30068-A-01-1
Figure 1 Special Socket (P/N 513.61.12.053)
Effectivity: ALL 12-B-61-10-02-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
STAND (P/N 513.61.12.050)
AGE AND TOOLS DATA
Table of Contents Page
STAND (P/N 513.61.12.050) - AGE AND TOOLS DATA............................................................ 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Propeller Stand (P/N 513.61.12.050)..................................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This stand is used for storing the propeller. It contains a Basic Stand P/N 513.61.12.049 which can be used for all
Pilatus Aircraft Propellers and a Flange P/N 513.61.12.051 for the PC-12 propeller.
Effectivity: ALL 12-B-61-10-02-03A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-611003-A-S4080-30069-A-01-1
Figure 1 Propeller Stand (P/N 513.61.12.050)
Effectivity: ALL 12-B-61-10-02-03A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
BETA SYSTEM PULLER (P/N 990.00.00.906)
AGE AND TOOLS DATA
Table of Contents Page
BETA SYSTEM PULLER (P/N 990.00.00.906) - AGE AND TOOLS DATA................................ 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Beta System Puller (P/N 990.00.00.906)................................................................ 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This puller is used to compress the beta system to gain access to the propeller attachment bolts for propeller
removal and installation.
Effectivity: ALL 12-B-61-10-02-04A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-611004-A-S4080-30070-A-01-1
Figure 1 Beta System Puller (P/N 990.00.00.906)
Effectivity: ALL 12-B-61-10-02-04A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
TRANSPORT CONTAINER (P/N 906.08.11.472)
AGE AND TOOLS DATA
Table of Contents Page
TRANSPORT CONTAINER (P/N 906.08.11.472) - AGE AND TOOLS DATA............................ 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 2
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
2 Transport container, propeller (P/N 906.08.11.472)................................................ 2
Index of Figures Page
1 Transport Container................................................................................................ 3
References
Table 1 References
Data module/Technical publication Title
12-B-61-10-02-06A-066A-A ADAPTER ASSEMBLY (P/N 513.61.12.015) - AGE AND
TOOLS DATA
12-B-61-10-02-07A-066A-A SUPPORT PLATE ASSEMBLY (P/N 513.61.21.014) - AGE
AND TOOLS DATA
Description
1 Application
The transport container is used for storage and transportation of a fully assembled propeller and its spinner.
The propeller is held in the transport container with the equipment that follows:
− The adapter assembly (P/N 513.61.12.015), refer to 12-B-61-10-02-06A-066A-A.
− The support plate assembly (P/N 513.61.21.014), refer to 12-B-61-10-02-07A-066A-A.
Effectivity: ALL 12-B-61-10-02-05A-066A-A
UNCLASSIFIED 2021-07-08 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
2 Dimensions
2.480 mm x 2.370 mm x 1.188 mm (97.6 in x 93.3 in x 46.7 in).
3 Mass
350 kg (772 lb).
4 Level/Use
Servicing.
5 Parts List
Table 2 Transport container, propeller (P/N 906.08.11.472)
Fig ref Part Number Nomenclature Units for each assembly
Figure 1 [1] 906.08.11.472 Transport Container 1
Effectivity: ALL 12-B-61-10-02-05A-066A-A
UNCLASSIFIED 2021-07-08 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-B-611002-A-S4080-02077-A-01-1
Figure 1 Transport Container
Effectivity: ALL 12-B-61-10-02-05A-066A-A
End of data module
UNCLASSIFIED 2021-07-08 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-61-10-02-05A-066A-A
UNCLASSIFIED 2021-07-08 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
TRANSPORT CONTAINER (P/N 906.08.11.490)
AGE AND TOOLS DATA
Table of Contents Page
TRANSPORT CONTAINER (P/N 906.08.11.490) - AGE AND TOOLS DATA............................ 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 2
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
2 Transport container, propeller................................................................................. 2
Index of Figures Page
1 Propeller Transport Container (P/N 906.08.11.490)............................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The transport container is used for storage and transportation of a fully assembled 5-blade propeller and its
spinner.
The 5-blade propeller assembly is held in the transport container with the equipment that follows:
− The spinner inlay (P/N 990.00.02.051), refer to 12-B-61-10-02-08A-066A-A.
− The adapter assembly (P/N 513.61.12.013), refer to 12-B-61-10-02-06A-066B-A.
− The support plate assembly (P/N 513.61.21.014), refer to 12-B-61-10-02-07A-066A-A.
Effectivity: ALL 12-B-61-10-02-05A-066B-A
UNCLASSIFIED 2021-07-08 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
2 Dimensions
2.850 mm x 2.576 mm x 904 mm (112.2 in x 101.4 in x 35.6 in).
3 Mass
440 kg (970 lb).
4 Level/Use
Servicing.
5 Parts List
Table 2 Transport container, propeller
Part Number Nomenclature Units for each assembly
906.08.11.490 Transport Container 1
Effectivity: ALL 12-B-61-10-02-05A-066B-A
UNCLASSIFIED 2021-07-08 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-B-611002-A-S4080-02091-A-01-1
Figure 1 Propeller Transport Container (P/N 906.08.11.490)
Effectivity: ALL 12-B-61-10-02-05A-066B-A
End of data module
UNCLASSIFIED 2021-07-08 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-61-10-02-05A-066B-A
UNCLASSIFIED 2021-07-08 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
ADAPTER ASSEMBLY (P/N 513.61.12.015)
AGE AND TOOLS DATA
Table of Contents Page
ADAPTER ASSEMBLY (P/N 513.61.12.015) - AGE AND TOOLS DATA................................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 2
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
2 Adapter assembly (P/N 513.61.12.015)................................................................. 2
Index of Figures Page
1 Adapter Assembly.................................................................................................. 3
References
Table 1 References
Data module/Technical publication Title
12-B-61-10-02-05A-066A-A TRANSPORT CONTAINER (P/N 906.08.11.472) - AGE AND
TOOLS DATA
12-B-61-10-02-07A-066A-A SUPPORT PLATE ASSEMBLY (P/N 513.61.21.014) - AGE
AND TOOLS DATA
Description
1 Application
The adapter assembly is used with the equipment that follows for storage and transportation of a fully assembled
propeller:
− The transport container (P/N 906.08.11.472), refer to 12-B-61-10-02-05A-066A-A
− The support plate assembly (P/N 513.61.21.014), refer to 12-B-61-10-02-07A-066A-A.
The bolts Figure 1 [3] and washers Figure 1 [2] attach the adapter assembly Figure 1 [1] to the propeller. The
adapter assembly Figure 1 [1], is then attached to the support plate assembly (P/N 513.61.21.014) in the base of
the transport container (P/N 906.08.11.472).
Effectivity: ALL 12-B-61-10-02-06A-066A-A
UNCLASSIFIED 2021-07-08 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
2 Dimensions
Diameter (maximum) 158 mm (6.22 in) x height (maximum) 160 mm (6.30 in).
3 Mass
1,98 kg (4.36 lb).
4 Level/Use
Servicing.
5 Parts List
Table 2 Adapter assembly (P/N 513.61.12.015)
Fig ref Part Number Nomenclature Units for each assembly
Figure 1 [1] 513.61.12.014 Adapter 1
Figure 1 [2] 968.29.11.487 Washer 6
Figure 1 [3] 968.29.11.601 Bolt 6
Effectivity: ALL 12-B-61-10-02-06A-066A-A
UNCLASSIFIED 2021-07-08 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-B-611002-A-S4080-02073-A-01-1
Figure 1 Adapter Assembly
Effectivity: ALL 12-B-61-10-02-06A-066A-A
End of data module
UNCLASSIFIED 2021-07-08 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-61-10-02-06A-066A-A
UNCLASSIFIED 2021-07-08 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
ADAPTER ASSEMBLY (P/N 513.61.12.013)
AGE AND TOOLS DATA
Table of Contents Page
ADAPTER ASSEMBLY (P/N 513.61.12.013) - AGE AND TOOLS DATA................................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 2
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
2 Adapter assembly (P/N 513.61.12.013)................................................................. 2
Index of Figures Page
1 Adapter Assembly.................................................................................................. 3
References
Table 1 References
Data module/Technical publication Title
12-B-61-10-02-05A-066B-A TRANSPORT CONTAINER (P/N 906.08.11.490) - AGE AND
TOOLS DATA
12-B-61-10-02-07A-066A-A SUPPORT PLATE ASSEMBLY (P/N 513.61.21.014) - AGE
AND TOOLS DATA
Description
1 Application
The adapter assembly is used with the equipment that follows for storage and transportation of a fully assembled
propeller:
− The transport container (P/N 906.08.11.490), refer to 12-B-61-10-02-05A-066B-A
− The support plate assembly (P/N 513.61.21.014), refer to 12-B-61-10-02-07A-066A-A
− The spinner inlay (P/N 990.00.02.051), refer to 12-B-61-10-02-08A-066A-A.
Effectivity: ALL 12-B-61-10-02-06A-066B-A
UNCLASSIFIED 2021-07-08 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
The bolts Figure 1 [3] and washers Figure 1 [2] attach the adapter assembly Figure 1 [1] to the propeller. The
adapter assembly Figure 1 [1], is then attached to the support plate assembly (P/N 513.61.21.014) in the base of
the transport container (P/N 906.08.11.472).
2 Dimensions
Diameter (maximum) 158 mm (6.22 in) x height (maximum) 160 mm (6.30 in).
3 Mass
1,98 kg (4.36 lb).
4 Level/Use
Servicing.
5 Parts List
Table 2 Adapter assembly (P/N 513.61.12.013)
Fig ref Part Number Nomenclature Units for each assembly
Figure 1 [1] 513.61.12.012 Adapter 1
Figure 1 [2] 968.29.11.487 Washer 6
Figure 1 [3] 968.29.11.601 Bolt 6
Effectivity: ALL 12-B-61-10-02-06A-066B-A
UNCLASSIFIED 2021-07-08 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-B-611002-A-S4080-02092-A-01-1
Figure 1 Adapter Assembly
Effectivity: ALL 12-B-61-10-02-06A-066B-A
End of data module
UNCLASSIFIED 2021-07-08 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-61-10-02-06A-066B-A
UNCLASSIFIED 2021-07-08 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
SUPPORT PLATE ASSEMBLY (P/N 513.61.21.014)
AGE AND TOOLS DATA
Table of Contents Page
SUPPORT PLATE ASSEMBLY (P/N 513.61.21.014) - AGE AND TOOLS DATA...................... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 2
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
2 Support plate assembly (P/N 513.61.21.014)......................................................... 2
Index of Figures Page
1 Support Plate Assembly......................................................................................... 3
References
Table 1 References
Data module/Technical publication Title
12-B-61-10-02-05A-066A-A TRANSPORT CONTAINER (P/N 906.08.11.472) - AGE AND
TOOLS DATA
12-B-61-10-02-06A-066A-A ADAPTER ASSEMBLY (P/N 513.61.12.015) - AGE AND
TOOLS DATA
Description
1 Application
The support plate assembly is used with the equipment that follows for storage and transportation of a fully
assembled propeller:
− The transport container (P/N 906.08.11.472), refer to 12-B-61-10-02-05A-066A-A
− The adapter assembly (P/N 513.61.12.015), refer to 12-B-61-10-02-06A-066A-A.
The six bolts Figure 1 [8], washers Figure 1 [6] and nuts Figure 1 [9] attach the support plate assembly Figure 1 [1]
to the base of the transport container (P/N 906.08.11.472). The adapter assembly (P/N 513.61.12.015) together
Effectivity: ALL 12-B-61-10-02-07A-066A-A
UNCLASSIFIED 2021-07-08 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
with the propeller, is then attached to the support plate assembly Figure 1 [1] with the two bolts Figure 1 [7], flat
washers Figure 1 [6] and spring washers Figure 1 [5].
2 Dimensions
Length 350 mm (13.78 in) x width 329,6 mm (12.98 in) x height (maximum) 90 mm (3.54 in).
3 Mass
10,94 kg (24.12 lb).
4 Level/Use
Servicing.
5 Parts List
Table 2 Support plate assembly (P/N 513.61.21.014)
Fig ref Part Number Nomenclature Units for each assembly
Figure 1 [1] 513.61.21.007 Support Plate 1
Figure 1 [2] 513.61.21.008 Centering Ring 1
Figure 1 [3] 932.35.14.003 Bolt 5
Figure 1 [4] 938.77.11.112 Washer, flat 5
Figure 1 [5] 938.81.11.514 Washer, spring 2
Figure 1 [6] 938.77.11.125 Washer, flat 8
Figure 1 [7] 932.35.14.612 Bolt 2
Figure 1 [8] 932.35.14.630 Bolt 6
Figure 1 [9] 938.07.68.510 Nut 6
Effectivity: ALL 12-B-61-10-02-07A-066A-A
UNCLASSIFIED 2021-07-08 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 x5
2
4 x5
7
1
8 x6
6 x6
9 x6
7 5
12-B-611002-A-S4080-02078-A-01-1
Figure 1 Support Plate Assembly
Effectivity: ALL 12-B-61-10-02-07A-066A-A
End of data module
UNCLASSIFIED 2021-07-08 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-61-10-02-07A-066A-A
UNCLASSIFIED 2021-07-08 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
SPINNER INLAY (P/N 990.00.02.051)
AGE AND TOOLS DATA
Table of Contents Page
SPINNER INLAY (P/N 990.00.02.051) - AGE AND TOOLS DATA............................................. 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
2 Spinner inlay........................................................................................................... 2
Index of Figures Page
1 Inlay Propeller Spinner........................................................................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The spinner inlay is used for the storage and transportation of the spinner and other items of the 5-bladed propeller
assembly.
The spinner inlay is installed in the propeller transport container (P/N 906.08.11.490), refer to 12-B-61-10-02-05A-
066B-A.
2 Dimensions
− Lower Pad - 740 mm x 796 mm x 390 mm (29.13 x 31.34 in x 15.35 in)
− Upper Pad (Lid) - 740 mm x 796 mm x 290 mm (29.13 x 31.34 in x 11.42 in).
Effectivity: ALL 12-B-61-10-02-08A-066A-A
UNCLASSIFIED 2021-07-08 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
15 kg (33.1 lb).
4 Level/Use
Servicing.
5 Parts List
Table 2 Spinner inlay
Part Number Nomenclature Units for each assembly
990.00.02.051 Spinner Inlay Propeller 1
Effectivity: ALL 12-B-61-10-02-08A-066A-A
UNCLASSIFIED 2021-07-08 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-B-611002-A-S4080-02093-A-01-1
Figure 1 Inlay Propeller Spinner
Effectivity: ALL 12-B-61-10-02-08A-066A-A
End of data module
UNCLASSIFIED 2021-07-08 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-61-10-02-08A-066A-A
UNCLASSIFIED 2021-07-08 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
NLG STRUT COLLAR (P/N 513.71.12.002)
AGE AND TOOLS DATA
Table of Contents Page
NLG STRUT COLLAR (P/N 513.71.12.002) - AGE AND TOOLS DATA.................................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 NLG Strut Collar (P/N 513.71.12.002).................................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This collar is fitted to the telescopic section of the nose landing gear strut. It limits the compression of the strut
during engine ground test at high power settings, reducing the risk of propeller damage.
Effectivity: ALL 12-B-71-00-06-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
85 mm
72 mm
12-A-710001-A-S4080-30071-A-01-1
Figure 1 NLG Strut Collar (P/N 513.71.12.002)
Effectivity: ALL 12-B-71-00-06-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
ENGINE COMPRESSOR WASH RIG (P/N 513.71.12.001)
AGE AND TOOLS DATA
Table of Contents Page
ENGINE COMPRESSOR WASH RIG (P/N 513.71.12.001) - AGE AND TOOLS DATA............ 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Engine Compressor Wash Rig (P/N 513.71.12.001).............................................. 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This engine compressor wash rig is used during power plant cleaning. It has a capacity of 10 liters. At the end of
the hose is an AN-fitting, which fits to the compressor wash installation.
The engine compressor wash rig can be used with the wash tube assembly P/N 9682011986 (PWC32271) to do
the compressor/turbine wash.
Effectivity: ALL 12-B-71-00-06-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-710002-A-S4080-30072-A-02-1
Figure 1 Engine Compressor Wash Rig (P/N 513.71.12.001)
Effectivity: ALL 12-B-71-00-06-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
ECS BLANKING DISC RIG (P/N 513.21.12.050)
AGE AND TOOLS DATA
Table of Contents Page
ECS BLANKING DISC RIG (P/N 513.21.12.050) - AGE AND TOOLS DATA............................ 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 ECS Blanking Disk Rig (P/N 513.21.12.050).......................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This disc is used to blank the ECS P 2.5 and P 3 pipes during a performance recovery wash. Two discs are needed
to do the wash.
Effectivity: ALL 12-B-71-00-06-03A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-710003-A-S4080-30073-A-01-1
Figure 1 ECS Blanking Disk Rig (P/N 513.21.12.050)
Effectivity: ALL 12-B-71-00-06-03A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
ENGINE SLING (P/N 968.20.12.942)
AGE AND TOOLS DATA
Table of Contents Page
ENGINE SLING (P/N 968.20.12.942) - AGE AND TOOLS DATA.............................................. 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Engine Sling (P/N 968.20.12.942).......................................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This sling is required during engine removal / installation (Pratt & Whitney PWC 51861-600).
Effectivity: ALL 12-B-71-00-06-04A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
S
LB
00
15
AD
LO
X
MA
LY
ON
E
US
A L
NT
RIZO
HO
12-A-710004-A-S4080-30074-A-01-1
Figure 1 Engine Sling (P/N 968.20.12.942)
Effectivity: ALL 12-B-71-00-06-04A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
COMPRESSOR WASH RIG FITTING (P/N 513.71.21.007)
AGE AND TOOLS DATA
Table of Contents Page
COMPRESSOR WASH RIG FITTING (P/N 513.71.21.007) - AGE AND TOOLS DATA............ 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
2 Parts list - Compressor wash rig fitting................................................................... 2
Index of Figures Page
1 Compressor wash rig fitting (P/N 513.71.21.007)................................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This compressor wash rig fitting is used to install a water hose at the compressor wash connection installed as
factory option or with SB 71-012 in the engine bay.
The compressor wash connection moves the existing connection point to a more accessible location and eases the
engine compressor desalination washes.
2 Dimensions
Diameter 35 mm (1.378 in) (maximum) x length 54 mm (2.126 in).
Effectivity: ALL 12-B-71-00-06-05A-066A-A
UNCLASSIFIED 2021-07-08 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
95 g (0.209 lb).
4 Level/Use
Servicing.
5 Parts List
Table 2 Parts list - Compressor wash rig fitting
Fig ref Part Number Nomenclature Units for each assembly
Fig. 1 513.71.21.007 Compressor wash rig fitting -
Figure 1 [1] 957.12.10.007 Compressor wash rig cou- 1
pling
Figure 1 [2] 957.12.10.008 Protection cap 1
Effectivity: ALL 12-B-71-00-06-05A-066A-A
UNCLASSIFIED 2021-07-08 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-B-710006-A-S4080-03627-A-01-1
Figure 1 Compressor wash rig fitting (P/N 513.71.21.007)
Effectivity: ALL 12-B-71-00-06-05A-066A-A
End of data module
UNCLASSIFIED 2021-07-08 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-71-00-06-05A-066A-A
UNCLASSIFIED 2021-07-08 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
TURBINE TEMPERATURE TEST SET (P/N 990.00.00.831)
AGE AND TOOLS DATA
Table of Contents Page
TURBINE TEMPERATURE TEST SET (P/N 990.00.00.831) - AGE AND TOOLS DATA.......... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Turbine Temperature Test Set (P/N 990.00.00.831)............................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This test set is used for testing the ITT system.
Effectivity: ALL 12-B-77-00-01-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-770001-A-S4080-30075-A-01-1
Figure 1 Turbine Temperature Test Set (P/N 990.00.00.831)
Effectivity: ALL 12-B-77-00-01-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
TURBINE TEMPERATURE TEST SET (P/N 990.00.00.859)
AGE AND TOOLS DATA
Table of Contents Page
TURBINE TEMPERATURE TEST SET (P/N 990.00.00.859) - AGE AND TOOLS DATA.......... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 2
4 Level/Use................................................................................................................ 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Turbine Temperature Test Set (P/N 990.00.00.859)............................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This TT1200A test set is used to test and check the turbine temperature system. The TT1200A ia an alternative to
TT1000A (P/N 990.00.00.831).
2 Dimensions
Height: 178 mm (7.0 in.)
Width: 279 mm 11.0 in.)
Depth: 25.4 (10.0 in.).
Effectivity: All 12-B-77-00-01-01A-066B-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
3 Mass
3.3 kg (7.3 lbs).
4 Level/Use
The test set can measure temperatures 1 °C to 1372 °C.
Effectivity: All 12-B-77-00-01-01A-066B-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-770001-A-S4080-30076-A-01-1
Figure 1 Turbine Temperature Test Set (P/N 990.00.00.859)
Effectivity: All 12-B-77-00-01-01A-066B-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: All 12-B-77-00-01-01A-066B-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
PRESSURE CALIBRATOR (P/N 990.00.00.839)
AGE AND TOOLS DATA
Table of Contents Page
PRESSURE CALIBRATOR (P/N 990.00.00.839) - AGE AND TOOLS DATA............................. 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Pressure Calibrator (P/N 990.00.00.839)............................................................... 3
References
Table 1 References
Data module/Technical publication Title
12-B-77-40-05-02A-066B-A PRESSURE CALIBRATOR (P/N 990.00.00.858) - AGE AND
TOOLS DATA
Description
1 Application
Note
This tool has been superceded by P/N 990.00.00.858, see TEM 12-B-77-40-05-02A-066B-A.
2 Dimensions
TBD
3 Mass
TBD
Effectivity: ALL 12-B-77-40-05-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
4 Level/use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
1 990.00.00.839 Pressure calibrator, Standard version -
- Carry case 1
- Fitting G 1/4" to Serto quick fit connector 1
- Hose to Serto quick fit connector 1
- Seal 2
- Spare battery 3.6 V 1
- User manual (German) 1
- User manual (English) 1
- Test certificate 1
- Vacuum pump 1
- T connection 1
2103-01-18.00 Minimess coupling 1620 1
2103-85-21.00 Minimess coupling 1620 2
S100-AC-AC-0050 Minimess hose DN 2 1
S100-AC-AC-0150 Minimess hose DN 2 1
S100-AC-AC-0320 Minimess hose DN 4 1
Effectivity: ALL 12-B-77-40-05-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Figure 1 Pressure Calibrator (P/N 990.00.00.839)
Effectivity: ALL 12-B-77-40-05-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-77-40-05-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
PRESSURE CALIBRATOR (P/N 990.00.00.858)
AGE AND TOOLS DATA
Table of Contents Page
PRESSURE CALIBRATOR (P/N 990.00.00.858) - AGE AND TOOLS DATA............................. 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Pressure Calibrator (P/N 990.00.00.858)............................................................... 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This test set is used to test and set the engine torque sensor and the oil pressure transducer.
2 Dimensions
TBD
3 Mass
TBD
Effectivity: ALL 12-B-77-40-05-02A-066B-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
4 Level/use
Servicing
5 Parts List
Fig ref Part No Nomenclature Units for each assembly
1 990.00.00.858 Pressure calibrator -
- Carry case 1
- Fitting G 1/4" to Serto quick fit connector 1
- Hose to Serto quick fit connector 1
- Seal 2
- Spare battery 3.0 V, CR2430 1
- User manual (German) 1
- User manual (English) 1
- Test certificate 1
- Vacuum pump 1
- Y connection 1
- CrNi filter 1
- USB converter 1
- Keller Software CD 1
- Proof protocol 1
2103-01-18.00 Minimess connection 1620 1
2103-85-21.00 Minimess connection 1620 2
S 100-AC-AC-0050 Minimess hose DN2 1
S 100-AC-AC-0150 Minimess hose DN2 1
S 100-AC-AC-0320 Minimess hose DN4 1
Effectivity: ALL 12-B-77-40-05-02A-066B-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Figure 1 Pressure Calibrator (P/N 990.00.00.858)
Effectivity: ALL 12-B-77-40-05-02A-066B-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-77-40-05-02A-066B-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
OPERATING PROBE (P/N 963.82.21.251)
AGE AND TOOLS DATA
Table of Contents Page
OPERATING PROBE (P/N 963.82.21.251) - AGE AND TOOLS DATA...................................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Operating Probe (P/N 963.82.21.251).................................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This probe is used in conjunction with a hose (inner diameter 1/2 in., length 1.5 meter) to drain engine oil.
Effectivity: ALL 12-B-79-00-01-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-790001-A-S4080-30076-A-01-1
Figure 1 Operating Probe (P/N 963.82.21.251)
Effectivity: ALL 12-B-79-00-01-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
OIL FILTER REMOVAL CHUTE (P/N 513.79.12.050)
AGE AND TOOLS DATA
Table of Contents Page
OIL FILTER REMOVAL CHUTE (P/N 513.79.12.050) - AGE AND TOOLS DATA..................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Oil Filter Removal Chute (P/N 513.79.12.050)....................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This chute is used to catch oil draining from the engine oil filter cavity on removal of the filter.
Effectivity: ALL 12-B-79-20-03-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-792001-A-S4080-30077-A-01-1
Figure 1 Oil Filter Removal Chute (P/N 513.79.12.050)
Effectivity: ALL 12-B-79-20-03-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
OIL FILTER HOUSING PULLER (P/N 968.20.11.906)
AGE AND TOOLS DATA
Table of Contents Page
OIL FILTER HOUSING PULLER (P/N 968.20.11.906) - AGE AND TOOLS DATA..................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Oil Filter Housing Puller (P/N 968.20.11.906)......................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This puller is used for removal of the oil filter housing.
Effectivity: ALL 12-B-79-20-03-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Figure 1 Oil Filter Housing Puller (P/N 968.20.11.906)
Effectivity: ALL 12-B-79-20-03-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
OIL FILTER ELEMENT PULLER (P/N 968.20.11.913)
AGE AND TOOLS DATA
Table of Contents Page
OIL FILTER ELEMENT PULLER (P/N 968.20.11.913) - AGE AND TOOLS DATA.................... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Oil Filter Element Puller (P/N 968.20.11.913)......................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This puller is used to remove the oil filter element.
Effectivity: ALL 12-B-79-20-03-03A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-792003-A-S4080-30079-A-01-1
Figure 1 Oil Filter Element Puller (P/N 968.20.11.913)
Effectivity: ALL 12-B-79-20-03-03A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
PRESSURE CALIBRATOR TEST SET (P/N 990.00.00.830)
AGE AND TOOLS DATA
Table of Contents Page
PRESSURE CALIBRATOR TEST SET (P/N 990.00.00.830) - AGE AND TOOLS DATA.......... 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Pressure Calibrator Test Set (P/N 990.00.00.830)................................................. 2
References
Table 1 References
Data module/Technical publication Title
12-B-79-30-06-01A-066B-A PRESSURE CALIBRATOR TEST SET (P/N 990.00.00.864) -
AGE AND TOOLS DATA
Description
1 Application
This test set is no longer available. Refer to TEM 12-B-79-30-06-01A-066B-A for an alternative test set.
This test set is used for testing and setting the engine torque sensor and the oil pressure transducer. The calibrator
comes complete with hydraulic screw pump, reservoir, indicator 0-35 bar (0-500 PSI) with an accuracy of ± 0.04%
reading + 0.01% full scale, hose connections, battery, user manual, certificate and aluminium carrying case.
Effectivity: ALL 12-B-79-30-06-01A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-793001-A-S4080-30083-A-01-1
Figure 1 Pressure Calibrator Test Set (P/N 990.00.00.830)
Effectivity: ALL 12-B-79-30-06-01A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
PRESSURE CALIBRATOR TEST SET (P/N 990.00.00.864)
AGE AND TOOLS DATA
Table of Contents Page
PRESSURE CALIBRATOR TEST SET (P/N 990.00.00.864) - AGE AND TOOLS DATA.......... 1
1 Application.............................................................................................................. 1
2 Dimensions............................................................................................................. 1
3 Mass....................................................................................................................... 1
4 Level/Use................................................................................................................ 2
5 Parts List................................................................................................................. 2
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Pressure Calibrator Test Set (P/N 990.00.00.864)................................................. 3
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
This pressure calibrator test set is used for testing and setting the engine torque sensor and the oil pressure
transducer.
2 Dimensions
230 x 440 x 750 mm
(9.0 x 17.3 x 29.5 in.)
3 Mass
12 kg
Effectivity: ALL 12-B-79-30-06-01A-066B-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
(26.5 lbs)
4 Level/Use
Servicing
5 Parts List
N/A
Effectivity: ALL 12-B-79-30-06-01A-066B-A
UNCLASSIFIED 2017-07-19 Page 2
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
12-A-793001-A-S4080-30083-A-01-1
Figure 1 Pressure Calibrator Test Set (P/N 990.00.00.864)
Effectivity: ALL 12-B-79-30-06-01A-066B-A
End of data module
UNCLASSIFIED 2017-07-19 Page 3
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
Intentionally left blank
Effectivity: ALL 12-B-79-30-06-01A-066B-A
UNCLASSIFIED 2017-07-19 Page 4
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
PARTICLE TEST TOOL (P/N 990.00.00.139)
AGE AND TOOLS DATA
Table of Contents Page
PARTICLE TEST TOOL (P/N 990.00.00.139) - AGE AND TOOLS DATA.................................. 1
1 Application.............................................................................................................. 1
Index of Tables Page
1 References............................................................................................................. 1
Index of Figures Page
1 Particle Test Tool.................................................................................................... 2
References
Table 1 References
Data module/Technical publication Title
None
Description
1 Application
The particle test tool is used to do a functional test of the Oil Debris Monitoring system. It simulates a metal particle
going through the sensor.
Effectivity: ALL 12-B-79-30-06-02A-066A-A
UNCLASSIFIED 2017-07-19 Page 1
PC-12/47E TEM Doc No 02306 ISSUE 01 REVISION 20 FOR MSN 545, 1001-UP
12-B-AGE-00-I
UNCLASSIFIED
OL
T TO
TES0.139
CLE 00
.0
RTI
PA /N 990.
P
12-A-793006-A-S4080-30084-A-01-1
Figure 1 Particle Test Tool
Effectivity: ALL 12-B-79-30-06-02A-066A-A
End of data module
UNCLASSIFIED 2017-07-19 Page 2
You might also like
- Model Type - PC-12/47E Msn-545 / 1001-UP Tool and Equipment Manual (TEM) Document Number 02306 12-B-AGE-00-INo ratings yetModel Type - PC-12/47E Msn-545 / 1001-UP Tool and Equipment Manual (TEM) Document Number 02306 12-B-AGE-00-I68 pages
- 1C-130H-4-22-1 Automatic Flight Control System100% (1)1C-130H-4-22-1 Automatic Flight Control System76 pages
- Illustrated Parts Catalog PC12/47E IPC Document Number 02308No ratings yetIllustrated Parts Catalog PC12/47E IPC Document Number 023082,796 pages
- SPC - 17-1763 - AppF - REV - B - CAAC Maintenance Capability List - EN - SignedNo ratings yetSPC - 17-1763 - AppF - REV - B - CAAC Maintenance Capability List - EN - Signed78 pages
- Pilatus PC-12 Aircraft Pilot Information Manual Part 1No ratings yetPilatus PC-12 Aircraft Pilot Information Manual Part 1625 pages
- PC-12 NG PowerPoint Presentation - 220523 - 081602100% (2)PC-12 NG PowerPoint Presentation - 220523 - 0816021,163 pages
- Airworthiness Directive Schedule: Engine Pratt and Whitney PW206 and PW207 Series 30 August 2012No ratings yetAirworthiness Directive Schedule: Engine Pratt and Whitney PW206 and PW207 Series 30 August 20125 pages
- 5 1 2 WA 1 - Rev1 0 - 20240515 - Eto - THD0389No ratings yet5 1 2 WA 1 - Rev1 0 - 20240515 - Eto - THD038934 pages
- 72.61.00.045 26-MAR-2020 08-DEC-2021 Closed A319-100N, A320-200N, A321-200N, A321-200NX, A321-200NY 72-61 Iae LLC Pratt & Whitney TFU UpdateNo ratings yet72.61.00.045 26-MAR-2020 08-DEC-2021 Closed A319-100N, A320-200N, A321-200N, A321-200NX, A321-200NY 72-61 Iae LLC Pratt & Whitney TFU Update9 pages
- 12-00009WD - F - Audio Interface (Garmin GMA 1347D)No ratings yet12-00009WD - F - Audio Interface (Garmin GMA 1347D)11 pages
- Pc-12, Pc-12/45, Pc-12/47 General - Aircraft Maintenance Manual50% (2)Pc-12, Pc-12/45, Pc-12/47 General - Aircraft Maintenance Manual104 pages
- Hawker 750/800XP/850XP/900XP Pro Line 21 MR10 Weight & Balance AddendumNo ratings yetHawker 750/800XP/850XP/900XP Pro Line 21 MR10 Weight & Balance Addendum8 pages
- Wiring Diagrams For 1756-HSC Module With 1492 IFM Wiring System ProductsNo ratings yetWiring Diagrams For 1756-HSC Module With 1492 IFM Wiring System Products4 pages
- 2111-2115 Safe Owners Manual - English Only - 03-05-2012No ratings yet2111-2115 Safe Owners Manual - English Only - 03-05-201211 pages
- Acurite 00613 00215-00477-00613-InstructionsNo ratings yetAcurite 00613 00215-00477-00613-Instructions2 pages
- 3M Ceramic Microspheres White Grades TDSNo ratings yet3M Ceramic Microspheres White Grades TDS2 pages
- Law On Sales: Contract of Sale - ConceptNo ratings yetLaw On Sales: Contract of Sale - Concept7 pages
- Transfer of TI's Wi-Fi Alliance Certifications To CC3x00/CC3x20/CC3x35-Based Product Using The WFA Derivative Certification PolicyNo ratings yetTransfer of TI's Wi-Fi Alliance Certifications To CC3x00/CC3x20/CC3x35-Based Product Using The WFA Derivative Certification Policy10 pages
- KM3000 KM4000 104075 E EnglishCompressedNo ratings yetKM3000 KM4000 104075 E EnglishCompressed122 pages
- Lincolnweld 860: Typical Applications Key FeaturesNo ratings yetLincolnweld 860: Typical Applications Key Features2 pages
- Learn About Landscape Recommendations For Adopting SAP Technologies - Part 1No ratings yetLearn About Landscape Recommendations For Adopting SAP Technologies - Part 155 pages
- The Automation Advantage: Embrace The Future of Productivity and Improve Speed, Quality, and Customer Experience Through AI Bhaskar Ghosh100% (4)The Automation Advantage: Embrace The Future of Productivity and Improve Speed, Quality, and Customer Experience Through AI Bhaskar Ghosh33 pages
- MN006372A01-AG Multilingual WAVE Mobile TLK 150 Installation GuideNo ratings yetMN006372A01-AG Multilingual WAVE Mobile TLK 150 Installation Guide122 pages
- c110 - Lincoln Electric Consumables 2014No ratings yetc110 - Lincoln Electric Consumables 2014512 pages