Scribd
Upload
118 views2 pages

TSB201801001

This document provides instructions for making cable connections on Hannay CR series reels. It contains the following key points: 1. Safety precautions like following electrical codes and shutting off power sources must be followed when working on the reels. 2. Diagrams and part names are provided to identify the components of the CR series reels and their collector assemblies. 3. Step-by-step instructions are given for routing wires through the reel components, making connections to the collector ring, checking continuity, reinstalling covers, and reconnecting power.

Uploaded by

Víctor Farías
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
118 views2 pages

TSB201801001

This document provides instructions for making cable connections on Hannay CR series reels. It contains the following key points: 1. Safety precautions like following electrical codes and shutting off power sources must be followed when working on the reels. 2. Diagrams and part names are provided to identify the components of the CR series reels and their collector assemblies. 3. Step-by-step instructions are given for routing wires through the reel components, making connections to the collector ring, checking continuity, reinstalling covers, and reconnecting power.

Uploaded by

Víctor Farías
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

TSB 2018.01.

001
Making Cable Connections
on CR Series Reels
Hannay Reels, Inc. Phone 1-518-797-3791 Affected Reels CR Reels
553 State Route 143, Westerlo, NY 12193 Toll Free 1-877-GO-REELS (467-3357) Time Required:
www.hannay.com Fax 1-800-REELING (733-5464) Priority: On Installation
Email: reels@hannay.com Int’l Fax 1-518-797-3259 Date Issued: January 2018

MAKE SURE TO FOLLOW ALL LOCAL/STATE/NATIONAL ELECTRICAL CODES


BE SURE TO SHUT OFF ALL INCOMING BREAKERS OR POWER SOURCES
LIQUID-TIGHT CONNECTIONS SHOULD BE USED AT ALL TIMES.

CR1600 SERIES NSCR SERIES


1
8
1 5
6
3 3

10
6

9
8

4
7
2
7 2

5
CR6600 SERIES

1 8
7 CR REEL PARTS
1 Spool
3
2 Frame
3 Collector Assembly
4 4 Collector Cover
5
5 Outlet Wire
6 Hub
7 Junction Box
8 Liquid Tight Conduit
9 Motor
6 10 Spring
9

2
PDF 1-18 1 of 2 Form H-1801-TSB
Tools Required:
• Phillips Head Screw Driver
• Flat Head Screw Driver
• Crimping Tool
• 7/16” Socket with Ratchet & Extension (To Remove Collector Cover)
• Wire Puller

COLLECTOR ASSEMBLY

6 3

COLLECTOR ASSEMBLY PARTS


5
1 Slip Ring
2 Brush Assembly
3 Liquid Light Conduit
4 Junction Box
5 Butt Splice
6 Outlet Wire
2 1
7 Inlet Wire

Actions Required:

1. Remove Collector Cover, Junction Box Cover (if present) and Drum Insert (if present).
2. Route wire into drum and through the hub. For reels with a drum insert the cable must first
be routed through the grommet in the insert before going into the drum.
3. Attach wires to corresponding leads on collector ring using appropriate connectors. Verify
reel & cable do not bind on rotation.
4. Make corresponding in coming connection in the junction box (if present) or route incoming
wires to the back side of the collector plate.
5. Check wire continuity from input to output. Reinstall drum insert and attach cable to drum
using a cable clamp.
6. Reinstall collector cover and junction box cover.
7. Reconnect all power sources and wind cable onto spool.
7 a. For spring powered reels refer to TSB 2013-07-005 for installation instructions.

PDF 1-18 2 of 2 Form H-1801-TSB

You might also like