CONTENTS

NEW PRODUCTS
DM20M 20CH DIGITAL MIXER 02 KK Series Entertainment project Audio System 70
DM8/DM12/DM16 Ultra-Compact Digital Mixer 04 KJ Series Active&Passive Entertainment Audio 74
DB16 Remote-Controlled Digital Mixer 05 System 79
DB20P-600/DB20P-1000/DB20P 20CH Rack-mounted Digital Mixer 06 L Series Engineering Speaker 82
MK Series Economical Professional Mixers 08 H Series Stage Speaker 85
P Series PoE-based active speaker 10 FPH Series Plastic Speaker 92
DM1616 AoIP technology Based Digital Intelligence Audio Matrix 12 FPD Series Plastic Speaker 95
KB Series Plastic Speaker 99

PROFESSIONAL SPEAKER FT Series Coaxial Speaker 101

DLS System Column speaker cabinet system with built-in 14 MK Series Studio Monitor Speaker 102
20CH digital mixer PAP Series Portable Combo Speaker System with
Built-in 8-channel Digital Mixer 108
LS System Column speaker cabinet system 16
PSM Series Stereo Monitor Speaker System
LA Series Full-range speaker 18
TS Series Coaxial Loudspeaker 23 MIXING CONSOLE
FHE Series Stage Monitor Speakers (Active & Passive) 30 KG Series Recording Mixing Consoles 111
KT Series Active Coaxial Loudspeaker 32 MIX-C Series Mixing Console 114
KV Series Compact Portable Pro Speaker Cabinet 38 MIX-CA Series Powered Mixers 115
PL Series 4 way long projection audio system 44 MIX Series Mixing Console 116
FW Series For Mobile Outdoor Performance 48 AE Series Microphone & Power Amplifier Combined 117
FHE Series Pro Active & Passive Speakers 51
K Series Engineering Speaker 57
KA Series Entertainment Audio System 62

2
 185,000 M² Audio Science and Technology Park

PROFESSIONAL AMPLIFIER& DIGITAL WIRELESS

PERIPHERAL EQUIPMENT CONFERENCE SYSTEM
DG Series Digital Amplifier with DSP 119 PWB69 Digital Wireless Conference System 141
AQ Series Digital Power Amplifier 120 WDM69 Digital Wireless Conference System 142
AG Series Digital Power Amplifier 122 PLL UHF Wireless receiver Two Channel Wireless 143
Micophone System
AK Series Network intelligent power amplifier(DSP) 124
Single Channel Wireless Microphone 144
EP Series Voltage Regulator 126
AL Series Professional Power Amplifier 127
AD Series Professional Power Amplifier 128
AE Series Professional Power Amplifier 129
AP Series Audio Processor 130
DP Series Audio Processor 133
SEQ Series Loudspeaker Controller 137
SPS Series Power Sequencer 138
AZ Series Power Sequencer 140

1
 DM20M
THE FIRST SOUNDKING COMPACT DIGITAL MIXER
Patent No: 2016830322501

R &D I N
UK & GERMANY

DM20M
Support operations and control by iPad or
Android tablet(after APP downloaded)
Innovatio Points:
Innovation
> S/PDIF in/out & AES/EBU output
> 7" 1024x600 IPS touch screen
> Input: 12 MIC(4 COMBO), 2 ST,S/PDIF input,USB input
> Touch screen sliding operation
> 8 FX (2 Modulation,2 Delay,2 Reverb,2 GEQ)
All-metal enclosure > BUS: L/R +4MONO+4ST+1Monitor/High quality
Introduction: components:NEUTRIK XLR
> 2 USB(recording/playback)
SK DM20M mixer – 20 channels,motorised faders, large
> iPad remote control
touch screen, USB ports – everything you need for perfect live
> Electro-gain of 12 MIC
mixing. DM20M is the result of many years of R&D combining
> 2.1 output
Soundking’s experience in signal processing with the latest > Support acoustic environment improvement at RTA measuring
technologies to give you total control over your sound. mode.
Although ultra compact, DM20M uses the full potential of our > Change 15-band GEQ to 31-band.
digital mixer expertise without compromising any features. All > Support ogg, flac, ape, WAV and MP3.
settings can be recalled including, most importantly, the faders – > Bus layer send function allows directly sending the required
unique in this class of mixer. Full control is also available remotely input channel to current bus at bus interface.
via Wi-Fi so you are free to mix anywhere in the venue.
There are 12 mic/line inputs, 2 stereo inputs all routable via Application:
16 buses to 8 balanced outputs. Joining them is a host of
1) Bar, KTV, party, etc;
professional digital interfaces – AES/EBU, SPDIF and two USB.
2) enterprise, school, etc;
The 1024x600 touch screen makes navigation simple and
3) band or music show, etc;
intuitive, in fact DM20M can be used straight out of the box
4) private home party;
without the need to read a 100 page manual!
5) studio or live show on the net;
Studio quality sound, multi-effects engines and full dynamics
processing make DM20M easy way to mix your sound.

2. Built-in Media Player & Recorder

1. Dynamics sub-page
2 USB(recording/playback)
The dynamics sub-page allows to change the parameter for
> Built in media player and recorder
the Gate and compressor.
> Playing MP3 or WAV format. The default recording format is
WAV.
> New APE and FLAC file format playing

P2
 Package

1 Mic In 8 Adjust Pot

2 Mic/Line In 9 System Control
3 Screen 10 Head Phone Port/Pot
4 Channel Strip Section 11 USB
5 Master Fader 12 S/PDIF In/Out
6 Layer 13 AES/EBU Out Put
7 Master Level Meter 14 Stereo Input

3. Hi
3 High
hQQuality
li Configuration
C fi i 6. iPad Control
The 4th generation 40bit SHARC floating > Control DM20 via iPad APP, including gain / EQ /
point processor, 24bit/192kHz dynamic / fader, etc.
AD/DA converting, built-in > Perfectly control DM20 via WiFi using built-in AP
reverb/delay/compressor/EQ/GEQ. or external router.

15-band GEQ upgraded to 31-band

4. Modulation Subpage 7. 4 band EQ

Double press “Modulation1 or 2” button in Frequency ranges from 20Hz up to 20kHz.
the FX Subpage, access to Modulation
parameter tuning Subpage as below
showed in the picture.

5. Easy Operation Perfect Tone 8. Mono Bus

2.1 output Bus 1 ~Bus 4 are Mono busses.
> One key crossover; set up
2.1 system quickly
> Save the time of mixing and installation
> Easy operation even for anyone
who has no tuning experience

> New RTA function

P3
 DM Series
Ultra-Compact Digital Mixer
Patent No: 2016830322501

Support operations and control

by the browser of iPad, Android
tablet, PC, etc

FEATURES
PC/iPad/smartphone remote control
Multiple control via wireless network and Ethernet, compatible witb
iOS, Android, Windows, Mac OS and Linux device
Input channel supports phantom power, 4 band PEQ, high pass
filter, compressor, effect and noise gate
Output channel supports reverb, delay and 8 built-in effects
2 x USB(stereo recording/playback/system updates/scene
storage)
24bit/192kHz ADC/DAC
60dB MIC pre-amp
4AUX, 1 Stereo output
4 assignable output
4 built-in effects
Support scene memory 1.MIC IN 7.Main L/R Out
2.MIC Volume 8.Headphone monitoring
3.STEREO IN 9.Channel Selection and LED
4.USB2.0 10.Function Selection and LED
5.AUX OUT 11.USB Play and Pause
6.Effect Foot Switch 12.Universal Knob

DM8 DM12 DM16

CHANNEL DESCRIPTION CHANNEL DESCRIPTION CHANNEL DESCRIPTION
MIC IN 6 2 x Combo XLR 8 4 x Combo XLR 12 6 x Combo XLR
LINE IN 1 pair STEREO 2 x JACK 2 pair STEREO 4 x JACK 2 pairs STEREO 4 x JACK
MAIN OUTPUT L/R "2 x XLR L/R "2 x XLR L/R "2 X XLR
AUX 2 2 x AUX OUT" 4 4 x AUX OUT" 4 4 X AUX OUT"
FOOTSWITCH 2 2 x JACK 2 2 x JACK 2 2 x JACK
MONIITOR 1 1x 1 1 x HEADPHONE 1 1 x HEADPHONE
USB HEADPHONE 2 x USB to connect USB stick for playback and record, support WAV and MP3 format
Network External wireless USB module
LAN interface 1 x interface for network connection
AD/DA Maximum support 24Bit/192KHz
Effect 4 effects - 2 Reverb and 2 Delay
Power supply External 12V DC(AC 90-240V 50/60Hz)adapter

P4
DB Series
Remote-Controlled Digital Mixer

Rear

1. MIC IN
2. MIC/LINE IN
3. STEREO IN
4. Output
5. PHONES

FEATURES
PC/iPad/smartphone remote control
Multiple control via wireless network and Ethernet, compatible witb iOS, Android, Windows, Mac OS and Linux device
Input channel supports pre-amp electro-gain, phantom power, 4 band PEQ, high pass filter, compressor, effect and noise gate

Output channel supports reverb, delay and 8 built-in effects

24bit/192kHz ADC/DAC
2 x USB(stereo recording/playback/system updates/scene storage)
16 Busses: 4 Mono output, 5 Stereo output, 1 Stereo monitor
8 assignable XLR output
4 built-in effects
Support scene memory

Support operations and control

by the browser of iPad, Android
tablet, PC, etc

DB16
CHANNEL DESCRIPTION
MIC IN 12 12 Combo XLR
LINE IN 2 Stereo 4 Jack
Master Out L/R 6 assignableXLR
AUX 12 output
USB Interface USB recording/playback(wav)
AD/DA Maximum 24Bit/192KHz
Effect 4 effect modules: 2 reverb, 2 delay
Network Wifi external module
Power Supply External 24V DC(AC 90-240V 50/60Hz) power adapter

P5
 DB20P-600/DB20P-1000/DB20P
20CH Rack-mounted Digital Mixer
Patent No: 2016830322501

R&D off UK and

d Germany
G

1 2 3 4 5 6
DB20P

DB20P-600
(With Power Amplifier)

10 9 8 7

20 Channels Rack Mounting Digital Mixer 1 Display screen 6 Channel section

2 Main channel 7 L/R channel
DB20P rack mounting digital mixer series, among which USB
3 8 Adjusting knob
DB20P-600/800 is rack mounting digital mixer with amplifier, 19” Layer
4 9 System control
standard rack mounting. Power button
5 10 Headphones
It combines the brand new concept of modern digital mixer and
traditional cabinet type mixer.
Compact design, simple operating interface, professional Reverb
(20 input channels) it includes 12 mic input, 2 stereo input
effect enables the professional an excellent performance, and can also
and pro digital input interface; 16 busses include 8 user
provide the inexperienced with powerful effect support.
defined analog outputs, digital output port and a pair of
The digital cabinet type mixer DB20P integrates the function of limiter,
monitor interface.
effect, divider, equaliser and regular analog mixer, saving you a lot of
It provides you with many configuration options. Besides,
costs.
DB20P is designed with 2 USB ports for playback, recording,
DB20P combines the advantages of high-tech hardware/touch-slide
scene memory and iPad remote control.
control and iPad remote control.
DB20P is equipped with 7” HD touch screen, WiFi control
Equipped with the 4th generation 40bit SHARC floating point
available, 10 parametric encoders, convenient and visual
processor, 24bit/192kHz ADC/DAC, internal 8 effects, including
operation.
yReverb, Delay, Modulation and GEQ.

High Quality Configuration

The 4th generation 40bit SHARC floating point processor,
controll
iPad con 24bit/48kHz AD/DA converting, built-in reverb/delay/
compressor/EQ/GEQ.
> Optional iPa
iPad remote control interface
ce
> iPad APP rerealizes gain, EQ, dynamic,
ic,
other operations of DB20P
fader and oth
> Hotpot m mode or router mode for or
transmission distance, easy
specific tran sy
and perfect ccontrol of DB20P

P6
 3 2 1

DB20P-600 rear panel

(With Power Amplifier)

4 5 6 7 8

3 2 1

DB20P rear panel

5 6 7 8

1 Mic, Line input 5 Output

2 Mic input 6 Balance digital output
3 Stereo input 7 Digital signal input/output
4 Internal Amp output 8 Power input

Model DB20P DB20P-600 DB20P-1000

Line input 12 MIC(4 COMBO), 2 Stereo, S/PDIF input, USB input
Input channel function Phase, Delay, high pass filter, 4-band parametric EQ, noise gate, Compressor, L/R Pan, Effects
Line output 8 assignable XLR + AES/EBU, S/PDIF and stereo headphone
Internal signal generator white noise/ sine wave/ pink noise
Phantom power 48V, each channel switchable alone
USB function USB playback/recording(WAV), system upgrade, scene storage, external USB network card
Screen 7” 1024x600 IPS high definition touch screen
AD/DA max support 192KHz/24-bit
Sample frequency 48kHz
DSP 4th generation ADI 40-bit float point SHARC processor, 450M
Effects up to 8 effect modules(2 Reverb, 2 Modulation, 2 Delay and 2 31-band GEQ)
System custom Android system
Network yes via external USB module
iPad control yes
Internal AMP output no 4*150W 4Ω 2*500W 4Ω
Power supply 100-240V 50/60Hz 100-120V 50/60Hz, 200-240V 50/60Hz
Dimension 127*483*177mm 193*483*177mm
Weight 4.3kg 6kg 6.5kg

P7
 MK Series
Economical Professional Mixers

MK24

Economical Professional Mixers

MK16/MK20/MK24 series economical professional mixers are designed based on the starting point of mass customers. Before
designing this series of mixers, we have conducted a survey on the function, pricing and quality of the competitors’(YAMAHA,
BEHRINGER, Soundcraft, ALLEN&HEATH) products, so as to ensure this series of mixers are powerful, cost-effective and
reliable. They feature 10CH/14CH/18CH mic inputs, 100 kinds of DSP effects, USB recording and playback, 4-bandof EQ, 2
frequency sweep, 4 groups/6 auxiliary output, etc.

Detail functions and features are as follow:

1) Built-in switching power supply, AC 100V-240V.
2) Low noise, large dynamic pre-amp.
3) Condenser mic with 48V phantom power.
4) Built-in digital effects imitating 100 kinds of acoustic fields, very intuitive digital display screen, convenient encoder control for
required effects and states.
5) Built-in USB recording, USB recording/playback with adjustable signal level.
6) Built-in 2 x 9-band graphic EQ.
7) 6 auxiliary outputs, 4 group outputs, 2 auxiliary returns.
8) High precision 12-band level indicator circuit.
9) Japan imported high-end NOBLE potentiometer.
10) Built-in MP3, USB , SD card, Bluetooth playback function.

P8
 MK24 REAR

MK16 MK20 MK24

Mono mic 10 14 18
Stereo mic 4 4 4
Stereo return 2 2 2
Main output 2 2 2
Group output 4 4 4
Auxiliary output 6 6 6
USB recording YES YES YES
DSP effects 100 100 100
MP3/USB/Bluetooth YES YES YES

P9
 P Series
PoE-based active speaker

(1)P14CA(POE)/P14C(PASSIVE (2)P14WA(POE)/P14W PASSIVE




Optional black or white color

Features
1). PoE-based active speaker P14WA(wall mounted)/P14CA(ceiling) is an audio power module with 60w/4Ω output, which
adopts the latest PoE technical standard. With only one network cable can realize power supply and Dante digital audio signal
transmission and control;
2). Integrate PoE power supply and Dante audio data transmission to simplify cable layout and conform to Ethernet
engineering specifications;
3). Digital and networked audio transmission realizes, high expendable system;
4). Distributed digital audio system: a large audio system of multiple input and output devices, decentralized audio device
connection, software routing and signal distribution;
5). Using Dante Controller software can easily realize fully networked Dante device detection and audio routing configuration;
6). Power amplifier features single RJ-45, 100Mbps of Dante audio transmission rate, routing control via Dante Controller,
parametric volume, mute, limit, EQ and noise gate(optional) control, over-current, high temperature, overload/short circuit
protection, natural heat dissipation;
7). Digital EQ adjustment and crossover. User can easily set EQ points and crossover frequencies matching the speaker.
The parameters and data set by user can be saved to the computer, the data on the computer and the machine can be read
and called from each other;
8). PoE network cabling adopts the 48V DC power supply carried by Ethernet cable, free from all restrictions of high-voltage
AD cabling, better satisfying the safety and fire prevention regulations;
9). Can be widely used in banquet hall/function hall, classroom, conference room, theme park, etc.

P10
 Installation
(1)ceiling (2)wall mounted












PoE-based active speaker 3DVVLYHEDVVUHÀH[

Model: P14WA(wall mounted)/P14CA(ceiling) Model: P14W (wall mounted)/P14C (ceiling)
Power: 60W Rated power: 30W(continuous), 120W (peak)
Directivity: 70 ° x 70 ° Maximum SPL: 105dB(continuous), 110dB (peak)
Frequency response: 130Hz-18kHz Frequency response(-10db): 130Hz-10kHz
Connector: single RJ-45 Sensitivity(1m/1w): 90dB
Audio transmission type: Dante Rated impedance: 8Ω
Rate: 100 Mbps Directivity: 70 ° x 70 °
Routing control: Dante Controller Input connector: 6.35mm jack
Control parameters: volume, mute, limit, EQ, noise gate(optional) LF unit: 4”/25.5mm voice coil/30W/8Ω/NdFeB
Digital THD: 0.001 Dimensions(DxWxH): 290*200*81(mm)
S/N ratio: >100dB(A-weighted)
Function: over-current, high temperature, overload/short circuit protection
Cooling: natural heat dissipation
Power input: PoE+, compatible with 802.3af and 802.3at

P11
 DM1616
AoIP technology Based Digital Intelligence Audio Matrix

DM1616 is a digital intelligence audio processing equipment based on AoIP technology that can coordinate digital speaker, digital
microphone, virtual sound source and traditional analog/digital audio equipment in fulfilling various core processing tasks for small
and medium scale audio systems. It meets the demanding requirements of high quality sound system for meeting, intelligent building,
performance, school, government agency and so on.
DM1616 has a series of monitoring tools(to monitor important system parameters, hardware’s running status and signal level), control
components and the most advanced configuration software system. Service life is improved and faults like shutdown are reduced due to
simplified operating process. The most popular feature of DM1616 is the very low signal processing costs.
Stability and reliability: DM1616 offers a set of complete scheme to solve dynamic design system. Compared with those systems used by
industry designer, engineer, maintainer, operator and terminal user, DM1616 has unparalleled stability and reliability.
DM1616 has the advantages of easy management, controllable hardware costs, enormous basic framework, perfect user interface and
forward-looking application consideration. The audio system built by DM1616 features easy management, controllable hardware costs,
enormous basic framework and economic system upgrade and reconstruction according to user demand. More importantly, DM1616 is
designed with comprehensive control interfaces to be called by user at any time.
After system construction is finished, although user demand is changed, DM1616 can still modify and create new user interface because
of the advantage of comprehensive control interfaces. Undoubtedly, DM1616 has the most advanced password protection to authorize
different levels of administrators so as to avoid any accident.
Meeting places are all depending on DM1616. When it comes to demanding audio requirement or high efficiency design requirement,
DM1616 remains the first choice.

1. AES67-2015 and AES70-2015 standard are used as basic framework of AoIP (Audio over IP) to realize digital audio distribution and
transmission; it supports Dante device expansion in accordance with user requirements to realize real intercommunication and mutual
control between systems and equipments (currently world’s first).
2. Built in with ADI fifth generation SHARC + dual core processor supports 32, 40 and 64bit floating point calculation and high performance
FFT/IIR/FIR hardware acceleration function, and calculating capacity reaches up to 5.4 GFlops.
3. The new generation integrated management platform MAXNet provides free configuration among various audio processing modules,
supports online and remote management, and offer real time system monitoring and control via PC, smartphone or tablet; AoIP routing and
handover(Dante included) can all be completed within the same interface without third party software like Dante Controller.
4. Voltage, current, temperature and level meter monitor.
5. Local alarm information storage: Set the voltage, current, temperature and the upper and lower limits of level meter and save the
information into local database so that user can have easy review of running state.
6. Control the active speaker designed with Dante network interface, adjust its parameters via network, check its running state and send the
monitored sound to Dante network by place a microphone within speaker.
7. Virtual connection and online control can only be established between output and input or between same type ports.

P12
MAIN PERFORMANCE
1. This unit offers 16CH analog input and 16CH analog output, 25pin D-shape interface
2. 24bit/48KHz sound quality, 110dB dynamic range
3. 6CH analog inputs all include high quality microphone amplifier(THAT chipset) and independent phantom power switch
4. Analog output adopts electronic transformer chip, auto matching for balance or unbalance connection mode
5. 4 x100M/1000M Ethernet interface, support AoIP cascade and master-slave mode
6. AoIP access maximum supports64in+64out AES67 and 64in+64out Dante
7. Standard module includes EQ, dynamics, delay, mix, crossover, signal generation, etc
8. Expansion module includes echo cancellation, howling suppression, auto mix, auto gain control, etc
9. Internal 4GPI+4GPO control interface can trigger linkage with other external equipment
10. Word Clock input&output, USB2.0 backup interface
11. Exercise independent control on each channel of DSP via Dante.
12. Delay module: support maximum 1s delay and function switching according to demand.
13. Route module: support maximum 16x16 routing.
14. Mix module: support maximum 16x16 mix, input&output gain adjustment and mute switching.
15. EQ module: support maximum 16-band PEQ and 31-band GEQ.
16. Filter module: include low pass, high pass, low cut and high cut filter. High pass and low pass filter provides two options-LR and
ButterWorth.
17. Crossover module: support maximum four-way and input&output gain back adjusting. Each frequency point can be adjusted alone and
also two options are provided-LR and ButterWorth.
18. Signal generator module: Currently provide two options-white noise and pure tone.

P13
 DLS System
Column speaker cabinet system with
built-in 20CH digital mixer LA308

LA308
iPad
i control
W ireless remote control
trol
mode, the user uses ipad
m pad
can
ca series
an easily link DLS ser
riess
product
pr
rod
oduct
uct
uc

LA12SA

LA12S

Introduction Application
Soundking is the first company to design rack mounting digital mixer Touring show,Small conference,conference room.
into PA product---- DLS portable column. The mixer features the 4th Function Room, Band practice room.
generation SHARC floating point processor, 24 bit/48 kHz AD/DA
convertor, built-in programs ( DSP, reverb, delay, modulation and EQ
and GEQ, 12 professional mic inputs and 4 line inputs, professional S/
Innovations:
PDIF digital signal in/out connectors, 16 BUS including 8 user-defined
World’s first PA system with internal digital mixer,
analogue output connector and AES/EBU output connectors, USB for
simplified system, easy installation and debugging.
playing / recording / scene saving and wireless connection. User can
Make the job of professionals much easier, iPad or
control the operation via iPad/tablet PC, and audit the sound at every
Android tablet remote control based on actual field
corner, and then adjust the mixing according the actual requirement.
conditions.

LA12SA Active Sub-bass Speaker System is built in with 3CH digital

amplifier, which means one Active Sub-bass Speaker can drive two
LA308 Full-Range Speakers and one LA12S Passive Sub-bass
Speaker.

P14
Application system

LA308 LA308
LA308
A308 LA308
Digital mixer Digital mixer

LA12S
DLA12S
LA12SA(active)
DLA12S
LA12SA LA12SA(active)

DLS122 82
DLS82
SYSTEM CONFIGURATION MODEL QUANTITY UNIT SYSTEM CONFIGURATION MODEL QUANTITY UNIT

Full range speaker LA308 4 piece Full range speaker LA308 2 piece

Subwoofer with mixer DLA12S 1 piece Subwoofer with mixer DLA12S 1 piece

Active subwoofer LA12SA 2 piece Active subwoofer LA12SA 1 piece

Passive subwoofer LA12S 1 piece Flight case(optional) JHDLS32 1 piece

Flight case(optional) JHLS82 2 piece Mixer stand DF150-3 1 piece

Mixer stand DF150-3 1 piece Speaker stand DB073 2 piece

Speaker wire 1 set Speaker wire 1 set

Signal wire 1 set Signal wire 1 set

Suitable for 500~800 sqm venue Suitable for 250~350 sqm venue

LA208 LA208 LA306 LA306

Digital mixer Digital mixer

SB314
SB314
SB314 SB314

LA12S active DLA12S DLA12S

LA12S active

DLS22 DLS32
32
SYSTEM CONFIGURATION MODEL QUANTITY UNIT SYSTEM CONFIGURATION MODEL QUANTITY UNIT
Full range speaker LA208 2 piece Full range speaker LA306 2 piece
Subwoofer with mixer DLA12S 1 piece Subwoofer with mixer DLA12S 1 piece
Active subwoofer LA12SA 1 piece Active subwoofer LA12SA 1 piece
Flight case(optional) JHDLS32 1 piece Flight case(optional) JHDLS32 1 piece
Mixer stand DF150-3 1 piece Mixer stand DF150-3 1 piece
Speaker stand DB073-1 2 piece Speaker stand DB073-1 2 piece
Speaker wire 1 set Speaker wire 1 set
Signal wire 1 set Signal wire 1 set

Suitable for 100~150 sqm venue Suitable for200~250 sqm venue

P15
 LS System
Column speaker cabinet system

LS series active column speaker system features easy system combination for different field requirements; excellent tone, compact design,
easy carry; alternative three types full range line array column speakers LA208/LA308/LA306, wide frequency response, clear tone, wide
horizontal coverage, long projection, etc.
Active subwoofer LA12SA with built-in powerful 32bit DSP module; gain, crossover, EQ, delay, limit and memory function, three-way
independent Class D amplifier, high efficiency, high power, low distortion, rated power: 1x900W+2x350W, excellent tone; switching mode
power supply, light weight, stable performance; three-way independent amplifier can drive one active driver, two full range speakers and
one passive subwoofer.
The whole set of system packed in flight case, waterproof bag enclosed for all-weather use; only 5 minutes needed to install the whole set
of system for different actual conditions.

Features:
> Full range speakers, imported unit, high sensitivity, light weight;
> High strength, light weight and elegant contour of cabinet;
> Clear tone, long projection;
> Three-way independent amplifier can drive one active driver,
two full range speakers and one passive subwoofer;
> Easy system combination, fast installation.

LS21 LS22
NAME MODEL Qty UNIT NAME MODEL Qty UNIT
Full range speaker LA208 2 piece Full range speaker LA208 2 piece
Active subwoofer LA12SA 1 piece Active subwoofer LA12SA 1 piece
Speaker stand SB305 2 piece Passive subwoofer LA12S 1 piece
Speaker wire 1 set Flight case(optional) 1 piece
Speaker stand DB073-1 2 piece
Suitable for 100~150 sqm venue
Suitable for 100~150 qm venue

LS122 LS31 LS32

NAME MODEL Qty UNIT NAME MODEL Qty UNIT NAME MODEL Qty UNIT
Full range speaker LA308 4 piece Full range speaker LA306 2 piece Full range speaker LA306 2 piece
Active subwoofer LA12SA 2 piece Active subwoofer LA12SA 1 piece Active subwoofer LA12SA 1 piece
Passive subwoofer LA12S 2 piece Speaker stand SB305 2 piece Passive subwoofer LA12S 1 piece
Flight case(optional) 2 piece Flight case(optional) 1 piece
Speaker stand DB073-1 2 piece
Suitable for 200~250 sqm venue
Suitable for 500~800 sqm venue
Suitable for 200~250 sqm venue

P16
column speaker cabinet system with built-in
20ch digital mixerxer

LA408 LA408

Feature
Active Subwoofer
This active subwoofer is configured with a built-
in powerful 32bit DSP processor that integrates
functions of Gain, Crossover, EQ, Delay, Limit,
Program Memory, etc; 6 DSP modes can be
flexibly selected for different applications including
Music, Vocal, Live Show, Disco, Karaoke and
Conference; 3-channel independent and highly-
DLA12S-1 LA12SA-1 efficient “Class-D” power amplifier features high
power, low distortion, light weight and stable
performance.

System Introduction
According to market demand, our company integrates its own strong technology strength to release the brand new 4” series sound
column system with metal material enclosure. It consists of 4 models, namely passive LA404/LA408 and active LA404A/LA408A. This
speaker series feature high sensitivity, high power and very penetrating speech intelligibility, a best choice for vocal sound reinforcement.
In order to expand the sound range and meet the bandwidth requirement from different kinds of music instruments, we also provide a
special 12” subwoofer to enhance ULF band .
This series is designed with 35mm hole on bottom for pole mounting purpose, and supports either combo use with subwoofer or the
rack mounting use for different amplifying applications, simple and convenient.
Application: very suitable for large/medium/small size meeting room, church, station, shopping mall, etc; Working together with
subwoofer, it is suitable for outdoor performance, band, bar, culture saloon, etc;

DLS48 DLS44 LS48 LS44

LS48system Guantity LS44system Guantity LS48system Guantity LS48system Guantity

LA408 2 LA404 2 LA408 2 LA404 2
DLA12S-1 1 DLA12S-1 1 LA12S-1 1 LA12S-1 1
LA12SA-1 1 LA12SA-1 1 LA12SA-1 1 LA12SA-1 1
DB023 2 DB023 2 DB023 2 DB023 2

P17
 LA Series
Full-range speaker Color options:
LA208

LA308

LA306

Features of LA208: Features of LA306:

> 8x2” full range speakers, Denmark imported Vifa unit, NdFeB magnet, high sensitivity, light > 8x3” full range speakers, NdFeB
weight; magnet, high sensitivity, light weight;
> AL cabinet, high strength, light weight, elegant contour; > AL cabinet, high strength, light
> Wide frequency response, clear tone, wide horizontal coverage, long projection, etc; weight, elegant contour;
> 6.35mm JACK and PHOENIX connector for quick and reliable connection; > Wide frequency response, clear
> Professional U type stand LWM-1 optional for wall installation, H and V angle adjustable; tone, wide horizontal coverage, long
>φ 35mm socket for pole mounting (SB305/DB073-1 stand pole). projection, etc;
> Professional SPEAKON and
Features of LA306: PHOENIX connector for quick and
> 6x3” full range speakers, Denmark imported Faital unit, high sensitivity, excellent MF response; reliable connection;
> Wide frequency response, clear tone, wide horizontal coverage, long projection, etc; > Professional stand for fast wall
> Professional SPEAKON and PHOENIX connector for quick and reliable connection; installation;
> Professional U type stand LWM-1 optional for wall installation, H and V angle adjustable; φ35mm socket for pole mounting
> φ35mm socket for pole mounting (SB305/DB073-1 stand pole). (SB305/DB073 stand pole).

LA series full range column speakers can meet the requirements of combination system or
single purpose for meeting room, use with woofer recommended.

Model LA208 LA306 LA308

Transducer 8x2"( 50 mm) neodymium driver 6x3"( 75mm) ferrite driver 8x3"( 75mm) ferrite driver
Frequency Response 160Hz-18kHz 130Hz-20kHz 150Hz-17kHz
Rated Power 120W 120W 240W
Sensitivity 92dB 95dB 97dB
Maximum SPL 118dB 123dB 127dB
Nominal Impedance 8Ω 12Ω 16Ω
Dispersion Angle 100°X 15° 100°X20° 125°X15°
Connection 1x PHOENIX,2x 6.3 JACK connector 2x PHOENIX,2x SPEAKON connector 1x PHOENIX,2x SPEAKON connector
Optional Accessories SB305/DB073-1 SB305/DB073-1 DB009-1/DB073
Dimensions(WxHxD) 70x610x90mm 124X550X152mm 103X807X130mm
Net Weight(kg) 2.9kg 6.5kg 5.8kg

P18
DLA Series
Subwoofer with built-in 20CH digital mixer DLA12S
Active subwoofer

DLA12SA
DL
D
DLA
DLA12S
LA12S
LA1122S
2SA

376 > 12”woofer, high power, prominent LF effect; >

Internal 32bit DSP module with gain, crossover, EQ,
delay, limit and memory function. Default or user
defined setting available; > Switching mode power
supply, light weight, reliable performance; > 3CH
453

Class D power amplifier, high power, low distortion,

perfect sound; > Standard φ35mm socket for pole
mounting; > Cooling fan and radiator;
> One LA12SA can drive two LA208/LA306/LA308
and one passive subwoofer.

DLA12S subwoofer with internal digital mixer

LA12SA/LA12S/DLA12S Equipped with 4th generation 40bit SHARC floating point processor,
24bit/48kHz ADC/ DAC, built-in effects including reverb, delay, limit and EQ;
16CH input including 12 mic and 4 line;
Professional digital signal in/out connector, 16CH bus control including 8
assignable analog out and digital out connectors.

LA12SA front panel DLA12S front panel

Model LA12SA LA12S DLA12S

Transducer Active Sub Woofer With DSP Passive sub woofer Active Sub Woofer With Digital mixer
Component 12"×1 12"×1 12"×1
Nominal Impedance 8Ω 8Ω 8Ω
RMS Power Handling 400W 400W 400W
Peak Power Handling 800W 800W 800W
Frequency Response 45Hz-180Hz 45Hz-180Hz 45Hz-180Hz
Sensitivity(1W/1M) 95dB 95dB 95dB
Max. SPL 124dB 124dB 124dB
AMP 900W+2×350W/8Ω / /
2 In 4 Out DSP Module / /
Enclosure birth plywood birth plywood polywood
Dimension (WxHxD) 376×453×479mm 376×453×479mm 376×453×479mm
Net weigh(kg) 24.5kg 18kg 24.3kg

P19
 LA Series
Full-range speaker

LA408/LA408AD
Color options:
137.5 165

LA404/LA404AD

137.5 165

934.5
526.5

Mounting: support either pole mounting for mobile amplifying or rack mounting for meeting amplifying.

Model LA404 LA408 Model LA404AD LA408AD

Type 4×4"passive full 8×4"passive full Type 4×4"active full 8×4"active full
range column system range column system range column system range column system
Frequency Response(-10dB) 100Hz--20kHz 100Hz--20kHz Frequency Response(-10dB) 100Hz--20kHz 100Hz--20kHz
Sensitivity(1m@1w) 92dB 94dB Sensitivity LINE 0 dBu 0 dBu
Max SPL 119dB 124dB Max SPL(dB) 115dB 120dB
Nominal Impedance 8Ω 4Ω RMS power 200W 400W
Rated Power 120W(continue), 240W(continue), LF Unit 4" full range /19mm 4" full range /19mm
480(peak) 960(peak) voice coil /30W voice coil /30W
LF Unit 4*4" full range /19mm 8*4" full range /19mm Coverage(V*H) 80°x20° 80°x20°
voice coil /30W voice coil /30W Connection JACK/XLR, built-in DSP JACK/XLR, built-in DSP
Coverage(HxV) 80°x20° 80°x20° Voltage 100V-240V(wide) 100V-240V(wide)
Connection 2×SPEAKON 2×SPEAKON Mounting ij35+rack ij35+rack
Mounting ij35+rack ij35+rack Dimensions(WxHxD) 137.5×526.5×165 (mm) 137.5×934.5×165 (mm)
Dimensions(WxHxD) 137.5×526.5×165 (mm) 137.5×934.5×165 (mm) Weight 7.5 kg 12 kg
Weight 6.4 kg 10.8 kg

P20
LA Series
Sound Column System

DLA12S-1/LA12SA-1
SUBWOOFER
Feature
For better amplifying effect, this series products adopt new mould metal material
and use hierarchical wavelike mesh so as to deliver an astonishing appearance;
professional rack mounting is angle-adjustable according to actual conditions.
Featuring high sensitivity, high power and very penetrating speech intelligibility,
this speaker series is a best choice for vocal sound reinforcement.

12" Subwoofer

LA12SA-1 rear panel DLA12S-1 rear panel

Model LA12SA-1 DLA12S-1

Type 12active subwoofer 12" passive subwoofer
Frequency Response(-10dB) 45Hz--180Hz 45Hz--180Hz
Sensitivity LINE 0 dBu 95dB
Max SPL(dB) 124dB 124dB
RMS power 900W(LF)+2*350W(MHF) 8Ω
LF Unit 12" LF /75mm voice coil /350W 350W(continue), 1400(peak)
Coverage(V*H) / 12" subwoofer/75mm voice coil/350W
Connection 2*XLR+USB,AUX \
Voltage 220V~230V 2×SPEAKON
Mounting ħ35+rack ħ35
Dimensions
WxHxD
376×453×479 (mm) 376×453×479 (mm)
Weight 24.5 kg 23 kg

P21
 20 Channels Rack Mounting Digitalixer

1 2 3 4 5 6

1 Display screen 6 Channel section

2 Main channel 7 L/R channel
3 USB 8 Adjusting knob
4 Layer 9 System control
5 Power button 10 Headphones

10 9 8 7
Features:
> It combines the brand new concept of modern digital mixer and
traditional cabinet type mixer.
3 2 1
> Compact design, simple operating interface, professional Reverb effect
enables the professional an excellent performance, and can also provide
the inexperienced with powerful effect support.
> This digital cabinet type mixer integrates the function of limiter, effect,
divider, equaliser and regular analog mixer, saving you a lot of costs.
> It combines the advantages of high-tech hardware/touch-slide control
and iPad remote control.
> Equipped with the 4th generation 40bit SHARC floating point
processor, 24bit/192kHz ADC/DAC, internal 8 effects, including Reverb,
Delay, Modulation and GEQ.
> (20 input channels) it includes 12 mic input, 2 stereo input and pro
4 5 6
digital input interface; 16 busses include 8 user defined analog outputs,
digital output port and a pair of monitor interface.
> It provides you with many configuration options; designed with 2 USB
DLS series products have wireless
ports for playback, recording, scene memory and iPad remote control.
transmitting mode for easy connection
> Equipped with 7” HD touch screen, WiFi control available, 10 1 Mic, Line input 4 Output
parametric encoders, convenient and visual operation. 2 Mic input 5 Balance digital output
3 Stereo input 6 Digital signal input/output

Technical Specifications
Line input 12 MIC(4 COMBO), 2 Stereo, S/PDIF input, USB input
Input channel function phase, delay, high pass filter, 4-band parametric EQ, noise gate, compressor, L/R pan, effects
Line output 8 assignable XLR + AES/EBU, S/PDIF and stereo headphone
Internal signal generator white noise/ sine wave/ pink noise
Phantom power 48V, each channel switchable alone
USB function USB playback/recording(WAV), system upgrade, scene storage, external USB network card
Screen 7” 1024x600 IPS high definition touch screen
AD/DA max support 192kHz/24bit
Sample frequency 48kHz
DSP ADI 4th generation 40bit SHARC floating point processor, 450M
Effects up to 8 effect modules(2 reverb, 2 modulation, 2 delay and 2 15-band GEQ)
System custom Android operating system
Network yes via external USB module
iPad control yes
Internal AMP output no
Power supply 100-240V 50/60Hz

P22
TS Series
Coaxial Loudspeaker Series

TS-SUB

TS-66

TS-33

TS-SF TS-UF TS-DF

Introduction:
Vocal clearness is essential for the theater loudspeaker, but the average loudspeaker has high proportion of reverb decreasing the
vocal clearness, and HF attenuation in far field affecting the tone, and inconstant directivity. Non-coaxial speaker cabinet has HF&LF
interference, obvious comb filtering.
Because of the reasons mentioned above, the market urgently needs a professional theater loudspeaker of excellent performance to suit
the theater application.
TS series is specially designed by US experts David W.Gunness and Stephen J.Siegel for large/medium theater reinforcement. The
series consists of TS-33 and TS-66 for far field and middle field individually, dual 18”subwoofer TS-SUB, filling loudspeaker TS-
UF. To improve the vocal clearness, the main loudspeaker uses horn cabinet design, coaxial LF & HF completely deleting the sound
interference. The glass fiber constant directivity horn is equipped with 3” Nd compression driver to ensure the high resolution. The near
field loudspeaker is designed with trapezoidal enclosure and 35 degree coverage. Except the subwoofer, each loudspeaker has 16 M10
flying points to ensure reliable suspension.

Application:
TS series is suitable for the applications in large or medium sizeentertainment places , etc.

P23
 TS-33
Far Projection Loudspeaker

Introduction:
TS-33 consists of a B&C 15”cone woofer and a 3”Nd magnetic HF
compression driver. TS-33 features horn cabinet design, coaxial LF & HF,
HF horn coverage 35°(H)*35°(V), 18mm plywood with slot-tongue structure
for robust tone. The cabinet has 16*M10 flying points for quick and reliable
suspension.

Features:
> Horn design with strong directivity, high sensitivity, high SPL, far projection
> High performance speaker unit to extend frequency response, Nd magnetic
HF
> Compact structure, coaxial HF&LF to delete sound interference
> Symmetrical trapezoidal enclosure for system installation
> Constant directivity horn for even frequency response

TS-33

Model TS-33
660

Type 15” two way passive loudspeaker

Frequency response 130Hz~18kHz(±3dB)
100Hz~20kHz(-10dB)
Input Sensitivity(1m/1W) -
Sensitivity(1W@1m) 104dB(LF) ; 110dB(HF)
Power handing LF: 700W (continuous); 2800W(peak) 610
HF: 110W(continuous); 440W(peak)
332
Nominal Impedance LF: 8Ω; HF: 16Ω
Coverage(HxV) 35°x35°
Crossover 950Hz
Woofer 1X15”cone woofer/100mm voice coil
HF driver 1X 75mm HF compression driver (1.4”throat)
830

/ 75 mm voice coil
Max SPL(@1m) 139dB(LF) ; 137dB(HF)
Connector 2XSPEAKON
Dimension(WxHxD) 610x660x830(mm)
Net weight 54kg
610

P24
TS-66
Far/Middle Projection Loudspeaker

Introduction:
TS-66 consists of a B&C 15”cone woofer and a 3”Nd magnetic HF compression
driver. PTS-66 features horn cabinet design, coaxial LF & HF, HF horn coverage
60°(H)*60°(V). The loudspeaker has no crossover inside, but has to connect with
external digital processor to optimize the performance. The glass fiber constant
directivity HF horn delivers delicate tone. High quality 18mm plywood cabinet
with slot-tongue structure offers robust tone. The loudspeaker has 16*M10 flying
points for quick and reliable suspension.

Features:
> Horn design with strong directivity, high sensitivity, high SPL, far projection
> High performance speaker unit to extend frequency response, Nd
magnetic HF
> Compact structure, coaxial HF&LF to delete sound interference
> Symmetrical trapezoidal enclosure for system installation
> Constant directivity horn for even frequency response
> NEUTRIK connector

TS-66

Model TS-66
660

Type 15” two way passive loudspeaker

Frequency response 130Hz~18kHz(±3dB)
100Hz~20kHz(-10dB)
Input Sensitivity -
Sensitivity(1W@1m) 103dB(LF); 109dB(HF)
Power handling LF:700W (continuous), 2800W(peak)
610
HF:110W (continuous), 440W(peak)
Impedance LF: 8Ω; HF: 16Ω 275
Coverage(HxV) 60°x60°
Crossover 950Hz
Woofer 1X15” cone woofer/100mm voice coil
HF driver 1X 75mm HF compression driver (1.4”throat)
670

/ 75 mm voice coil
Max SPL(@1m) 138dB(LF); 135dB(HF)
Connector 2XSPEAKON
Dimension(WxHxD) 610x660x670(mm)
Net weight 50kg
610

P25
 TS-SUB
Subwoofer

Introduction:
TS-SUB consists of two RCF 18” cone woofers. The vented cabinet
and diagonal unit assembly effectively reduce the standing wave
and make the loudspeaker compact. The loudspeaker has no
crossover inside, but has to connect with external digital processor
to optimize the performance. High quality 18mm plywood cabinet
of slot-tongue structure offers robust tone. The loudspeaker has
16*M10 flying points for quick and reliable suspension.

Features:
> Classic vented structure; LF extended to 33Hz;
> High performance speaker units extends frequency response;
NdFeB magnetic;
> Diagonal unit assembly effectively reduces the standing wave and
make the loudspeaker compact.
> 18mm plywood with slot-tongue structure for robust tone;
> NEUTRIK connector

TS-SUB

760 510

Model TS-SUB
Type 18” passive subwoofer
Frequency response 45Hz~250Hz(±3dB)
37Hz~280Hz(-10dB)
Input Sensitivity -
Sensitivity(1W@1m) 101dB
910

Power handling 2400W (continuous), 9600W (peak)

Nominal Impedance 8Ω×2
Crossover 200Hz
Woofer 2X18” cone woofer/100mm voice coil
Max SPL(@1m) 141dB
Connector 2XSPEAKON
Dimension(WxHxD) 760x910x510(mm)
Net weight 67kg

P26
TS-UF
Filling Loudspeaker

Introduction:
TS-UF consists of a B&C 8”cone woofer and a 1.73” Nd
magnet HF compression driver. The HF coverage is 100°(H)
X70°(V). The external digital processor optimizes the loudspeaker
performance. Glass fiber constant directivity HF horn delivers
delicate tone and splendid pan. 12mm plywood cabinet with slot-
tongue structure offer robust tone. The cabinet is designed with
15*M6 flying points for quick and reliable suspension.

Features:
> Compact design for ceiling installation
> High performance speaker unit extends frequency response;
NdFeB
magnetic HF
> Multi-angle cabinet for flexible installation
> External digital processor optimizes the speaker performance
> 15 M6 flying points for quick and reliable suspension
> NEUTRIK connector

TS-UF
510 260
270

Model TS-UF
Type 8”two way passive loudspeaker
Frequency response 120Hz~18kHz (±3dB)
70Hz~20kHz (-10dB)
Input Sensitivity -
Sensitivity(1W@1m) 92dB
Power handling LF: 200W (continuous); 800W (peak)
HF: 50W (continuous); 200W (peak)
Nominal Impedance LF: 8Ω; HF: 8Ω
Coverage(HxV) 100°x70°
Crossover 4000Hz
Woofer 1X8” cone woofer/50mm voice coil
HF driver 1X 44mm HF compression driver (1”throat)
/ 44 mm voice coil
Max SPL(@1m) 121dB
Connector 2XSPEAKON
Dimension(WxHxD) 510x270x260(mm)
Net weight 12kg

P27
 TS-DF
Near Projection Loudspeaker

Introduction:
TS-DF consists of a B&C 12” coaxial full range speaker, 12”cone
woofer and a 3”HF compression driver. HF horn coverage is 80°(H)
X80°(V). The voice coils of HF and LF are reversed to effectively
compensate the MF/HF impedance, and to reduce the distortion but
improve efficiency. The trapezoidal design is suitable for near field
projection. Aluminum HF horn delivers delicate tone and splendid
pan. 18mm plywood cabinet with slot-tongue structure offers robust
tone. The cabinet is designed with 12*M10 flying points for quick
and reliable suspension.

Features:
> Full range coaxial speaker design, HF & LF sharing NdFeB
magnet; low distortion, high sensitivity;
> High performance speaker unit extends frequency
response.
> Coaxial design deletes the interference of HF &LF and
makes the loudspeaker compact.
> External processor optimizes the speaker performance.
> Trapezoidal enclosure suits the near field projection;
coverage 35 degree;

TS-DF

Model TS-DF
Type 12" two way passive loudspeaker
Frequency response 180Hz~18kHz (±3dB)
150Hz~20kHz (-10dB)
Sensitivity(1W@1m) 99dB
Power handing LF: 350W (continuous); 1400W (peak)
HF: 80W (continuous); 320W (peak)
Nominal Impedance LF: 8Ω; HF: 8Ω
Coverage(HxV) 80°x80°
Crossover 1200Hz
Woofer 1X12"cone woofer/67mm voice coil
HF driver 1X 75mm HF compression driver / 75mm voice coil
Max SPL(@1m) 130dB
Connector 2XSPEAKON
Dimension(WxHxD) 540x400x530(mm)
Net weight 23kg

P28
TS-SF
Filling Loudspeaker

Introduction:
TS-UF consists of a 5”cone woofer and a 25mm HF compression
driver. delicate tone and splendid pan. 12mm plywood cabinet with
slot-tongue structure offer robust tone.

Features:
> Compact design
> High performance speaker unit extends frequency
response; NdFeB magnetic HF
> Multi-angle cabinet for flexible installation
> Coaxial design deletes the interference of HF &LF and
makes the loudspeaker compact.

TS-SF

Model TS-SF
Type 5”two way passive loudspeaker
Frequency response 90Hz~20kHz(±3dB)
70Hz~20kHz(-10dB)
Sensitivity(1W@1m) 87dB
Power handling 80W
Nominal Impedance 8Ω
Coverage(HxV) 90°x90°
Crossover 4000Hz
Woofer 1X5”cone woofer/38mm voice coil
HF driver 1X 25mm HF compression driver (1”throat)/13mm voice coil
Max SPL(@1m) 112dB
Connector 2XSPEAKON
Dimension(WxHxD) 250x210x190mm
Net weight 4kg

P29
 FHE Series
Stage Monitor Speakers Active & Passive

FHE12MA (Active) FHE12M(Passive)

FHE15MA (Active) FHE15M(Passive)

Model FHE12MA FHE15MA

Type 12" Active Stage Monitor 15" Active Stage Monitor
Frequency response 55Hz--20kHz(-10dB) 50Hz--20kHz(-10dB)
LF 12"LF/75mm voice coil 15"LF/75mm voice coil
HF 44mm voice coil 44mm voice coil
Input Sensitivity 0dBu 0dBu
OPTIONAL(5M 10M 15M 20M)
Max.SPL 129dB 131dB
Amp power rated 300W (LF)+80W (HF) 400W (LF)+80W (HF)
Coverage(HxV) 90°x40° 90°x40°
Crossover 2.0KHz 2.0KHz
Input connectors JACK/XLR JACK/XLR
Power supply 230V/115V 230V/115V
Suspension system 8 M10 flying points 8 M10 flying points
Dimensions (WxHxD) 604x360x335 (mm) 696x415x386 (mm)
Net weight 29Kg 33Kg BF103E

Model FHE12M FHE15M

Type 12" 2 way Passive Stage Monitor 15" 2 way Passive Stage Monitor
Frequency response 55Hz--20kHz (-10dB); 50Hz--20kHz (-10dB)
Sensitivity (1W@1m) 97dB 98dB
Nominal Impedance 8Ω 8Ω
Power handling 300W (continuous); 1200 (peak) 400W (continuous); 1600 (peak)
Crossover 2.2kHz 2.2kHz BF103A
LF 12" MF/LF /75mm Voice Coil /300W 15" MF/LF /75mm Voice Coil /350W
HF 44 mm Compression Driver/1" Throat /40W 44mm Compression Driver/1" Throat/40W
Coverage(HxV) 90°x40° 90°x40°
Max.SPL 128dB 130dB
Input Connector 2×SPEAKON 2×SPEAKON
Suspension system 12 M10 flying points 12 M10 flying points
Dimensions (WxHxD) 604x360x335 (mm) 696x415x386 (mm)
Weight 22kg 29kg BF103U

P30
 FHE12MB(Active)
FHE15MB(Active)

Features:
> Elegant appearance, wearable, solid, water-proof wooden box.
> High performance tweeter and woofer, big power, excellent tone.
> Seven M10 flying points makes hanging flexible.

OPTIONAL(5M 10M 15M 20M)

BF103A FHE15MB

Model FHE12MB FHE15MB

Type 12"Active Stage Monitor 15"Active Stage Monitor
Frequency response 55Hz--20kHz(-10dB) 50Hz--20kHz(-10dB)
LF 12"LF/75mm voice coil 15"LF/75mm voice coil
HF Ti/PEN diaphragm /44mm voice coil Ti/PEN diaphragm /44mm voice coil
Input Sensitivity 0dBu 0dBu
Max.SPL 129dB 131dB
Amp power rated 300W (LF)+80W (HF) 400W (LF)+80W (HF)
Coverage(HxV) 90°×40° 90°×40°
Crossover 2.0kHz 2.0kHz
Input connectors JACK/XLR JACK/XLR
Power supply 230V/115V 230V/115V
Dimensions (WxHxD) 608×360×335 (mm) 696×415×386 (mm)
Net weight 22kg 28.5kg

P31
 KT Series
Active Coaxial Loudspeaker

KT315A
KT312A

KT328A
KT18SA

KT12M
KT12MA

Introduction:
KT series are three way (dual driver) coaxial active speaker LIMIT/DELAY/volume, etc. The panel operation can be
cabinets, each of which consist of an 8 inch MF/HF coaxial replaced by PC operation via the USB connection to PC.
speaker (ĭ50mm 8" MF unit /ĭ44mm HF compression driver) Professional software is equipped for PC operation.
and LF unit (different size for different model) to deliver high Application:
power, round and clear tone, even coverage. The Class D power Conference room, concert hall, multi-function hall, stage
amp features high efficiency, high power, compact structure, light monitoring, etc;
weight, etc.
Features:
> Unique shape, compact, light-weighted; durable silver Dual coaxial drivers
environmental friendly paint;
> Solid plywood with slot-tongue structure cabinet to deliver
robust tone;
HF unit is located at the
> Dual coaxial driver MF/HF unit to offer optimal coverage and to rear part of the MF unit
improve sound clearness and resolution;
The two units completely
> Efficient Class D power amplifier with 1500W load capacity, combine to be a real point
HF energy spread via
stable performance, low distortion; the center of MF cone
audio source

> ĭ35mm tray for stand installation;

> KT series has DSP function to process EQ/X-OVER/

P32
KT Series
Active Coaxial Loudspeaker

KT328A KT312A

KT312A Rear Panel

KT328A Cutaway view KT312A Cutaway view
 
 




Model KT328A KT312A

Type Active Coaxial Loudspeake Active Coaxial Loudspeaker
Frequency response 65Hz~20kHz(±3dB) 58Hz~18kHz(±3dB)
Input Sensitivity 0dBu 0dBu
Max SPL(@1m) 135dB(peak) 136dB(peak)
Amp. power 1500W 1500W
Coverage(HxV) 60°x60° 60°x60°
Crossover (LM/MH) 320Hz(Active) 320Hz(Active)
2kHz(Passive) 2.0kHz(Passive)
Input Connector RCA/XLR RCA/XLR
Input Voltage 230V 230V
Supporting system ĭ35 ĭ35
Dimension (WxHxD) 371x721x375(mm) 410x637x403(mm)
Weight 25.2kg 27.5kg

P33
 KT Series
Active Coaxial Loudspeaker

KT312A/KT315A

KT315A KT18SA
KT18SA

KT315A Cutaway view KT18SA Cutaway view

   





Model KT315A KT18SA

Type Active Coaxial Loudspeake Active Coaxial Subwoofer
Frequency response 50Hz~20kHz (±3dB) 35Hz~100Hz (±3dB)
Input Sensitivity 0dBu 0dBu
Max SPL(@1m) 137dB (peak) 128dB
Amp. power 1500W 1500W
Coverage(HxV) 60°x60° N/A
Crossover (LM/MH) 300Hz(Active) 80Hz /100Hz
2.0kHz(Passive)
Input Connector RCA/XLR RCK/XLR
Supporting system ĭ35 ĭ35
Dimension (WxHxD) 480x716x472(mm) 650x719x672(mm)
Weight 33.6kg 49.5kg

P34
KT Series
Stage Monitor Speaker

The stage monitoring series consists of active and passive types. Angles 38°/42°/45°/48°/52° are offered for option. The series is the best
choice for stage show and near field reinforcement.

Features:
> HF/LF units adopts Nd magnet coaxial design. The strong magnet
flux density to improve voice coil efficiency and sensitivity, ensure
reproducing original sound and lower distortion;
> HF compression driver with Ti/PK compound diaphragm and 75mm KT12M
voice coil to ensure sound transparency and clear; KT12MA
> Dual class D power amplifier offers sufficient headroom. The switching
power supply provides wide dynamic and sound purity. Thermal/power
surge/over load/short circuit protection;
> Passive LC crossover; PTC protection of HF; high quality components
to reproduce original sound;
> Unique and novel shape; handles for convenient transportation;
> 45°/20° monitoring angle of the enclosure;
> Water-proof painting finish; steel grille for protection;

coaxial loudspeaker KT12M rear panel KT12MA rear panel

Model KT12M
Type Two way passive monitoring loudspeaker Model KT12MA
Frequency response 55Hz -20kHz(±3dB) Type Two way active monitoring loudspeaker
Sensitivity(1W@1m) 96dB Frequency response 55Hz -20kHz(±3dB)
Nominal Impedance 8Ω Input sensitivity 0dBu
Power handling 300W( continuous), 1200W (peak) Amp power rated 350W (LF)+100W (HF)
Crossover 1.2kHz Crossover 1.2KHz
LF 12” LF/75mm voice coil/Nd magnet LF 12” LF/75mm voice coil / Nd magnet
HF 75mm compression driver/1.5” exit/ Nd magnet HF 75 compression driver /1.5” exit / Nd magnet
Coverage (HxV) 80°×80° Coverage (HxV) 80°×80°
Max SPL 127dB Max SPL 128dB
Connector 4×Speakon Connector JACK/XLR
Dimension (WxHxD) 468x430x442(mm) Dimension (WxHxD) 468x430x442(mm)
Weight 17.5kg Weight 20kg

P35
 KT Series
Active three-way coaxial system with DSP

Dual coaxial speaker

Mellow and clean sound, evenly distributed sound field

Coaxial point audio

source, constant
directivity unit

HF unit is located at the rear

part of LF unit

Tw o u n i t s c o m p l e t e l y
combine to be a real point
1 audio source
9 Energy spreads from the same
2
3 point via the center of LF cone
8
4
5 7
6
10
11
12

Adjustable DSP effect

1. Peak lamp
2. Signal lamp
3. Power lamp
4. Menu button: press repeatedly to switch between function
5. Function button
6. Function button
7. Exist and save button
8. USB port: used to connect a PC for data transfer
9. Multifunction encoder button: long press for status adjustment
10. MIC IN
11. LINE IN
12. PRELINK OUTPUT

PC software operation interface: PEQ interface: to drag EQ frequency X-Over interface: to drag X-Over curve via
support volume, gain, X-Over, PEQ, via mouse or type in data directly for mouse or type in data directly for setting.
delay, limit and other function. To setting. Each EQ frequency can be HIGH and LOW PASS support different
import or export user parameters to independently set for LEVEL and Q attenuation.
a PC. value. Each channel supports 5 EQ
frequencies.

P36
System combination diagram

KT312A KT312A

DB081 (optional) digital mixer DM20

optional MIX08C

KT18SA KT18SA

KT315A KT315A

digital mixer DM20

optional MIX08C

KT18SA KT18SA

KT312A KT312A

digital mixer DM20

KT12MA KT12MA

optional MIX08C

KT18SA
KT18SA

P37
 KV Series
Compact Portable Pro Speaker Cabinet

Introduction:
KV series speaker cabinet, one of the most compact pro speaker cabinets, is
designed by famous UK expert with plywood and durable black finish. The active

KV12E(passive)/KV12AE(active)
mode uses Class D module for compact contour and high efficiency, max power
1000W but stable powerful performance. Passive model features Nd magnetic
design, high sensitivity, abundant powerful bass.
Features:
>Compact, light weight;
> Class D power amplifier, reliable performance delicate tone;
> Nd magnet LF unit(passive) and HF compression design;
> Constant directivity horn, coverage 80°x60°;
> Also used for 45°stage monitoring;
> Black durable finish;
> Full range speaker cabinet with 13 flying points and pole socket for various
installation.
Application:
Medium/small touring show, entertainment venue, conference room, stage
monitoring, etc;
KV15E(passive)/KV15AE(active)
KV18SE(passive)\KV18SAE(active)

P38
KV Series
Compact Portable Pro Speaker Cabinet

KV15AE

KV12AE

KV12AE Rear Panel

KV15AE Cutaway view

KV12AE Cutaway view
601

697




 

Model KV12AE KV15AE

Type 12inch 2-way active cabinet 15inch 2-way active cabinet
Frequency response 55Hz~20kHz(-10dB)/60Hz~18kHz(-3dB) 45Hz~20kHz(-10dB)/55Hz~18kHz(-3dB)
AMP power LF: 205W/HF: 80W LF: 250W/HF: 80W
Crossover 1.7kHz 1.5kHz
LF unit 12Ǝwoofer / ij34mm voice coil 15
woofer/
63.5mm voice coil
HF unit Compression driver / ij34mm voice coil Compression driver/
34mm voice coil
Coverage(HxV) 80° x 60° 80° x 60°
Max SPL 125dB 126dB
Connector XLR BAL, JACK and RCA XLR BAL, JACK and RCA
Dimension 365x341x601(mm) 430x400x697(mm)
Net/gross weight 18kg/21kg 21.3kg/25kg

P39
 KV Series
Compact Portable Pro Speaker Cabinet

KV15E

KV12E

KV12E Cutaway view

KV15E Cutaway view
608

697
704








Model KV12E KV15E

Type 12inch 2-way passive cabinet 15inch 2-way passive cabinet
Frequency response 55Hz~20kHz(-10dB)/60Hz~18kHz(-3dB) 45Hz~20kHz(-10dB)/55Hz~18kHz(-3dB)
Sensitivity 96dB 96dB
Impedandce 8Ω 8Ω
Rated power 200W(continue), 400W(program),800W(peak) 200W(continue), 400W(program),800W(peak)
Crossover 2.5kHz 2.5kHz
LF unit 12Ǝ woofer /ij34mm voice coil 15Ǝ woofer /ij63.5mm voice coil
HF unit Compression driver / ij34mm voice coil Compression driver /ij34mm voice coil
Coverage(HxV) 80° x 60° 80° x 60°
Max SPL 125dB 125dB
Connector 2 X SPEAKON 2 X SPEAKON
Dimension 365x341x608(mm) 430x400x704(mm)
Net/gross weight 17.5kg/21.1kg 21kg/26.4kg

P40
KV Series
Compact Portable Pro Speaker Cabinet

KV12E
KV15E
KV18SE
KV18SAE

KV18SE
KV18SE & KV18SAE Cutaway view KV18SAE



667

Model KV18SE
Type 18inch passive subwoofer

Model KV18SAE Frequency response 35Hz~200Hz(-10dB)/45Hz~150Hz(-3dB)

Type 18inch active subwoofer Sensitivity(1W@1m) 96dB

Frequency response 35Hz~150Hz(-10dB)/45Hz~100Hz(-3dB) Impedance 8Ω

AMP power 600W Rated power 400W

LF unit 18Ǝsubwoofer/ij75.8mm voice coil LF unit 18Ǝ subwoofer/ij75.8mm voice coil

Max SPL 124dB Max SPL 127dB

Connector XLR BAL Connector 2xSPEAKON

Dimension 530x615x667(mm) Dimension 530x615x674(mm)

Net/gross weight 32.7kg/37.5kg Net/gross weight 31.8kg/38.5kg

P41
 KV Series
Compact Portable Active Speaker Cabinet(with DSP)

Introduction:
KV series active speaker cabinets features LF ferrite magnet with symmetric
design and heat resistant voice coil for high power load and heat dissipation, KV12AD
HF compression driver with Al diaphragm for delicate tone, 24bit 48kHz DSP
processor, four tone modes selection, 3 band EQ, low cut, limit, delay, volume
control, etc; LCD for various parameter adjustment; Dual power amp design: LF
Class-D power amp power amp design: LF Class-D power amp for high efficiency,
compact contour,high power, light weight, and reliable performance, HF class AB
power amp for pleasant tone.
Features:
> 1. Unique and compact contour, light weight, black finish;
> 15mm plywood with slot tongue;
> ij35mm socket for pole mounting; 12 M10 flying points for suspension;
> LF Class-D+HF class AB power amplifier, power 350W+50W;
> 24bit 48kHz DSP, LCD for tone adjustment, 3 band EQ, low cut, limit, delay,
volume control, etc
> 12Ǝ15Ǝ full range speaker cabinets are designed with universal power supply.
Application:
main reinforcement, filling reinforcement, stage monitoring in multifunction hall,
auditorium, etc;

This knob adjusts volume normally. Press it to enter into

menu to adjust function (4 tone modes/ 3 band EQ/low cut/
delay, etc, diaplayed on LCD). after function adjustment, user
can select EXIT to escape out from menu or it escapes out
automatically after no operation.

KV12AD Rear Panel

1 Master volume & DSP adjustment
2 LCD
3 Mic/Line volume
4 AUX IN
5 Mic/Line input
6 Output
7 Power switch
8 Power socket
Model KV12AD
Type 12 inch 2 way active speaker cabinet (DSP)
Frequency response 60Hz~18kHz (-3dB)
55Hz~20kHz (-10dB)
Input sensitivity LINE:0dBu MIC:-40dBu
KV12AD Cutaway view
Max SPL 127dB(PeaK)
AMP power 350W+50W
LF unit 12" woofer/ ĭ63.5mm voice coil
HF unit compression driver / ĭ34mm voice coil
Coverage(H*V) 80°x60°
601

Crossover 2.5kHz
Input connection(H*V) 2xXLR/Jack combo input,3.5mm jack:XLR LINK output


Input voltage 100~240V

Suspension 12*M10 flying points+ĭ35
Dimension(WxHxD) 365*601*341mm
Weight(gross) 17.8/20.7 kg 

P42
KV Series
Compact Portable Active Speaker Cabinet(with DSP)
KV15AD

1 Master volume & DSP

P adjustment
2 LCD
3 Mic/Line volume KV15AD Cutaway view

697
4 AUX IN
5 Mic/Line input
6 Output
7 Power switch
8 Power socket




KV18SAD Cutaway view


667

KV18SAD


Model KV15AD
Type 15 inch 2 way active speaker cabinet (DSP)
Frequency response 65Hz~18kHz (-3dB)
45Hz~20kHz (-10dB)
Model KV18SAD
Input sensitivity LINE:0dBu MIC:-40dBu Type 18inch active speaker cabinet (DSP)
Max SPL 128dB(PeaK) Frequency response 45Hz~100Hz (-3dB)
AMP power 350W+50W 35Hz~150Hz (-10dB)
LF unit 15" woofer/ ĭ63.5mm voice coil Input sensitivity LINE: 0dBu
HF unit compression driver / ĭ34mm voice coil Max SPL 130dB (PeaK)
Coverage H*V 80°x 60° Amp power 600W
Crossover 2.3kHz LF unit 18" subwoofer
Input connection(H*V) 2xXLR/Jack combo input,3.5mm jack:XLR LINK output Input connection 2 Balanced XLR in and 2 Balanced XLR out
Input voltage 100~240V Input voltage 115V/230V
Suspension 12*M10 flying points+ĭ35 Suspension ĭ35
Dimension(WxHxD) 430*697*400mm Dimension(WxHxD) 530*667*615mm
Weight(gross) 20.8/25.4kg Weight(gross) 35.1/42 kg

P43
 PL Series
4 way long projection audio system

The perfect tone surpasses that of line array

4UPSBHF
ESBXFS
GPS
NJYFS

Product Model qty

System configuration: Medium/long projection speaker cabinet PL2 2 pcs

PL long projection audio system uses 4 way design to MFLF long projection speaker cabinet PL215 2 pcs

offer high SPL, high power, clear and bright HFMF, powerful Medium/long projection subwoofer PL21S 2 pcs

bass, thus to substitute traditional line array system; 20CH digital mixer DM20 1 pcs

convenient installation, easy operation, high performance MFHF horn power amp AF4200 1 pcs

low cost MFLF power amp AG2150 1 pcs

The cabinet features premium plywood, durable coating Subwoofer power amp AG2200 1 pcs

finish, ergonomic handle, easy transportation, two Power sequencer SPS8 1 pcs

professional speaker connectors on the rear panel. Audio processor AP4080-z 1 pcs

Application: Large square meeting, touring show, bar, etc;

Features: ·
>21 inch subwoofer imported from UK ensures powerful GP Series Audio Processor

bass. GF Digital Power Amplifier

>Horn design for 4 way
GM Digital Power Amplifier
>MF unit uses 100mm compound diaphragm compression
driver to offer high SPL, high definition and rich tone and
Tool box(cable accessories)
overcomes the shortcoming of traditional cone speaker.
>Convenient installation, easy operation, high performance
low cost;

P44
PL Series
Mid/Long Throw Speaker

PL2 Features: PL215 Features:

PL2 mid/long projection horn speaker cabinet consists PL215 mid/long projection MF/LF speaker cabinet consists of horn
of a 100mm MF compression driver and a 75mm HF and two woofers. The LF unit featues NdFeB symmetrical magnet,
driver. The MF MgAl/KAPTON compound diaphragm light weight, leakproof magnet, excellent transient and robust
features high resolution and SPL. The HF Ceramic/ cone, etc. The speaker cabinet delivers powerful bass, clear vocal,
KAPTON compound diaphragm features high SPL. The prominent detailed performance. When used with the full range
product is also equipped with specially designed horn to speaker cabinet, the system offers ultra-wide dynamic range.
prominently improve the eletro-acoustic efficiency.

PL2
PL215

PL215 Cutaway view

450
PL2 Cutaway view
344
948
539.4
646

669
398

Model PL2 PL215

Type Middle/long projection horn Dual 15” middle/long projection
speaker cabinet speaker cabinet
Frequency response 450Hz -18kHz 50Hz -1500Hz
Nominal Impedance MF: 8Ω / HF: 8Ω 4Ω
Rated power MF: 120W ( continuous), 480W (peak) 1000W( continuous), 4000W (peak)
HF: 80W( continuous), 320W (peak)
Sensitivity(1W@1M) MF: 113dB( continuous), 139dB (peak) 102dB( continuous), 138dB (peak)
HF: 112dB ( continuous), 137dB (peak)
Coverage (H*V) 100°X60° /
Crossover (MF/HF) 2.5 kHz (Active) /
Unit MF: 1(100mm)+HF: 1(75mm) 15” x 2 (75mm)
Connector 2XNL8MP /
Dimension(WxHxD) 344x646x398 mm 450x948x669 mm
Weight 28.4kg 45kg

P45
 PL Series 21" Subwoofer GL218S

GL218S

Features:
> 2x18" passive bass reflex;
> 2pcs 100mm ferrite LF units;
> Cabinet made from 18mm plywood, exterior treated with black coating.

Model GL218S
Type 18"Reflex Loaded Passive Bass Speaker
Frequency Response(-10dB) 32Hz - 200Hz
Sensitivity(1W@1M) 99dB±3dB
Max.SPL(peak 138dB
Rated Power 2000W (continuous) 8000W (peak) 
Rated Impedance 4Ω
Input 2 x speakon
LF unit 2X18"subwoofer/100mm voice coil /1800W/4Ω
Dimension(WxHxD) 1115 x 585 x 758 (mm)


Net weight 83kg

Gross weight 92.3kg


P46
System Configuration

Recommended Configuration List:

Medium/long projection speaker cabinet PL2 2 pcs
MFLF long projection speaker cabinet PL215 2 pcs
Medium/long projection subwoofer PL218S 2 pcs
Digital mixer DM20M 1 pcs
Digital amplifier AG4150 2 pcs
Digital amplifier AM2400 1 pcs
Audio processor DP48 1 pcs

DM20M is the globally first compact digital mixer which features the
advantages of premium hardware and iPad remote control, the 4th
generation 40 bit SHARC floating point processor, 24bit/192kHz DA/
AD converting, built-in 8 effect modules (reverb, delay, modulation,
GEQ. (20 input channels) 12 professional mic and 2 stereo digital input
DM20 connectors.16CH BUSes includes 8 assignable analog output and digital
output.

AG4150
8Ω / stereo 4×1500W
Rated Output Power
4Ω / stereo 4×2550W
(THD+N=1%,1kHz
2Ω / stereo 4×3570W
continue sine wave,
16Ω / bridge 2×3000W
all channel driving

8Ω / bridge 2×5100W
4Ω / bridge 2×7140W

AM2400 8ΩStereo Power 2x2400W

4ΩStereo Power 2x4000W
8ΩBridged Mono Power 8000W
4ΩBridged Mono Power 12000W
Frequency Response 20Hz~25kHz±0.5dB
THD 0.1%
S/N Ratio 110dB
Weight 13kg

Analog input / Analog output 4 x XLR bal / 8 x XLR bal

DP48 Min load 150 ohm
THD+N 0.001% at 1kHz 0dBu
S/N >100dBA
Frequency response 20Hz – 20kHz; -0.5dBu at 20Hz and 20kHz
DSP 4x32bit filter processing, 96bit precision inte-
rmediate data calculation
PEQ 30 filters for input; 7 filters for output

P47
 FW Series
For Mobile Outdoor Performance

FW12

FW212/FW215

FW208

INTRODUCTION: FEATURES:
FW series speakers represent a high quality, full-range and horn loaded >Light-weight cabinet, waterproof
speaker which can make high quality sound and sound reproduction. They >Coaxial structure speaker
can be used in any weather condition. >High sensitivity output,
>Far sound reproduction.
APPLICATIONS: >Safety and reliability flying settings, easy to
Stadium, Outdoor Plaza, Conference Center, etc. install

P48
FW Series
For Mobile Outdoor Performance

FW208 FW212
FW215

Cutaway view

Model FW208 FW212 FW215

Type 2-way passive speaker 2-way passive speaker 2-way passive speaker
LF FH0804H(8”+1”) FB1207H(12") FB1507H(15")
HF / FE010(1.7") FE025(3")
Frequency response 90Hz~15kHz(-10dB) 90Hz~15kHz(-10dB) 80Hz~18kHz(-10dB)
Sensitivity(1W@1m) 95 dB 102dB 104dB
Nominal Impedance 8Ω 8Ω 8Ω
Power handling 120W (continuous), 480W (peak) 250W (continuous), 1000W (peak) 350W (continuous), 1400W (peak)
Max. SPL 122dB 132dB 135dB
Coverage(HxV) 60°x 60° 45°x 45° 45°x 45°
Dimension(HxWxD) 325x325x345(mm) 450x450x670(mm) 535x535x765(mm)
Net Weight 15 kg 27.5 kg 32.5kg
Gross Weight 17.5 kg 35 kg 40 kg

P49
 FW Series
For Mobile Outdoor Performance

INTRODUCTION:
The FW12 long throw horn loaded speaker was specially
designed for gymnasium. It consists of a 12” woofer and two
44 mm high compression driver. The horn is same with the
D series line array loudspeaker with the constant directivity
and dual high compression drivers for higher intelligibility.

FEATURES:
>Light-weight cabinet, waterproof
>Power-Output with high sensitivity FW12
>Coverage with far distance
>Professional flying setting with safety and reliability, easy
to install

APPLICATIONS:
Gymnasium, Stadium, Club Auditorium, Small Venue.

Cutaway view

Model FW12
Type 2-way 12” long distance horn loaded speaker
Frequency response 200Hz~16kHz(±3dB)
140Hz~20kHz(-10dB)
Sensitivity (1w@1m) 106dB
Power handling 300W (continuous), 1200W (peak)
Nominal impedance 8Ω
Horn Coverage(H*V) 50°x25°
Crossover 2.2kHz
LF 1x12" paper cone woofer
HF 2x44mm HF compression driver (1" exit)
Max. SPL 137dB
Dimension(W x H x D) 617x707x700mm
Net Weight 34kg

P50
FHE Series
Pro Active & Passive Speakers

FHE8A
FHE8
FHE215A
FHE215

FHE212A
FHE212

FHE15A
FHE18SA FHE15 FHE12A
FHE18S FHE12
FHE10A
FHE10

FHE12MA
FHE15MA
FHE12M
FHE15M

FHE12MB
FHE15MB

Instruction:
FHE series of cabinets are the optimal selection for fixed installation reinforcement and touring show system. This series of cabinets have
various of model, especially the high power dual 15” and dual 12” models, for specific application environment and audio reinforcement
requirement.

Features:
>The magnet configuration of woofer greatly reduces distortion. Winding voice coil increases the surface of voice coil and heat
dissipation.
>High sensitivity, power and efficiency
>Tweeter with 3” and 1.74”voice coil, horn with constant directivity, rational power design, ensure elegant tone and sufficient power
margin.
>Water proof paint and grille with waterproof structure for the applications in various weather
>Fourteen M10 screws for hanging, standard pole mounting, quick set up, multi-angle hanging
>wheels of dual 12” and dual 15” cabinet for easy moving

Applications:
This series of cabinets are suitable for the applications in bar, coffee bar, disco hall, cinema, theatre, multi-purpose hall, medium or small
sized stadium, concert, outdoor show, meeting, etc.

P51
 FHE Series
Pro Active Speakers

FHE8A
FHE10A
FHE12A
FHE15A

Cutaway view

Model FHE8A FHE10A FHE12A FHE15A

Type 2- way 8” active loudspeaker 2- way 10” active loudspeaker 2- way 12” active loudspeaker 2- way 15” active loudspeaker
Frequency response 65Hz~20kHz(-10dB) 55Hz~20kHz(-10dB) 45Hz~20kHz(-10dB) 40Hz~20kHz(-10dB)
Max SPL 120dB 124dB 126dB 128dB
Coverage(H*V) 90°x60°(rotatable) 90°x60°(rotatable) 90°x60°(rotatable) 90°x60°(rotatable)
Crossover 3.0kHz 2.5kHz 1.8kHz 1.5kHz
LF 8”MF/LF / 50mm Voice Coil 10”MF/LF / 75mm Voice Coil 12”MF/LF / 75mm Voice Coil 15”MF/LF / 75mm Voice Coil
HF PK diaphragm / 44mm Voice Coil PK diaphragm / 44mm Voice Coil PK diaphragm / 44mm Voice Coil Ti / PEN diaphragm / 75mm Voice Coil
Input connector JACK / XLR JACK / XLR JACK / XLR JACK / XLR
Input sensitivity 0dBu 0dBu 0dBu 0dBu
Amp power rated 200W(LF)+60W(HF) 300W(LF)+60W(HF) 350W(LF)+100W(HF) 400W(LF)+100W(HF)
Dimension(WxHxD) 300x514x330(mm) 340x578x357(mm) 390x660x409(mm) 424x740x437(mm)
Weight 18kg 21kg 26kg 36kg

P52
FHE Series
Pro Active Speakers

FHE18SA

FHE12
FHE15

SB310

FHE18SA

Cutaway view

1 L signal input connector

2 L signal link output connector
3 L high pass signal output connector
4 R signal input connector
5 R signal link output connector
6 R high pass signal output connector
7 Volume
Model FHE18SA 8 Ground/float switch
Type 18” active subwoofer
9 Fan
Frequency response 35Hz~100Hz(-10dB)
128dB
10 Power switch
Max SPL
Crossover 80Hz/100Hz 11 Fuse
LF 18”/100mm Voice Coil 12 Power socket
Input connector JACK / XLR
13 Low pass signal crossover switch
Input sensitivity 0dBu
750W 14 Sub LF phase switch
Power amp rated
Dimension(WxHxD) 568x627x710(mm) 15 Power/signal/peak indicato
Weight 58.5kg

P53
 FHE Series
Pro Active Speakers

FHE212A
FHE215A
1 line input
2 line output
3 power LED
4 volume
5 HF EQ
6 MF EQ
7 LF EQ
8 low cut switch(80Hz)
9 power switch
10 voltage selection switch
11 fuse
12 power connector

Cutaway view

Model FHE212A FHE215A

Type 2-way 2x12” active loudspeaker 2-way 2x15” active loudspeaker
Frequency response 45Hz~20kHz(-10dB) 40Hz~20kHz(-10dB)
Max SPL 131dB 132dB
Coverage(HxV) 90°x60°(rotatable) 90°x60°(rotatable)
Crossover 1.7kHz 1.5kHz
LF 2x12”MF/LF/75mm Voice Coil 2x15”MF/LF/75mm Voice Coil
HF Ti / PEN diaphragm/75mm Voice Coil Ti / PEN diaphragm/75mm Voice Coil
Input connector JACK / XLR JACK / XLR
Input sensitivity 0dBu 0dBu
Amp power rated 700W(LF)+100W(HF) 750W(LF)+100W(HF)
Dimension(WxHxD) 405x989x445(mm) 450x1153x508(mm)
Weight 36kg 52kg

P54
FHE Series
Pro Active Speakers

FHE8
FHE10
FHE12
FHE15

Cutaway view

Model FHE8 FHE10 FHE12 FHE15

Type 2-way 8" Passive Speaker 2-way 10" Passive Speaker 2-way 12" Passive Speaker 2-way15" Passive Speaker
Frequency response 60Hz~20kHz(-10dB) 55Hz~20kHz(-10dB) 50Hz~20kHz(-10dB) 45Hz~20kHz(-10dB)
Max. SPL 120dB 125dB 128dB 130dB
Sensitivity(1W@1m) 92dB 95dB 97dB 98dB
Nominal Impedance 8Ω 8Ω 8Ω 8Ω
Power handling 150W (continuous) , 600W (peak) 250W (continuous) , 1000W (peak) 300W (continuous) , 1200W (peak) 400W (continuous) , 1600W (peak)
Coverage(HxV) 90°x40°( Rotatable ) 90°x60°( Rotatable ) 90°x60°( Rotatable ) 90°x60°( Rotatable )
Crossover Freq 2.5kHz 2.5kHz 2.1kHz 2.0kHz
LF 8”MF/LF / 50mm Voice Coil 10”MF/LF / 65mm Voice Coil 12”MF/LF / 75mm Voice Coil 15”MF/LF / 75mm Voice Coil
HF Ti diaphragm / 44mm Voice Coil PK diaphragm / 44mm Voice Coil PK diaphragm / 44mm Voice Coil Ti / PEN diaphragm / 75mm Voice Coil
Dimension(WxHxD) 300x514x330(mm) 340x578x357(mm) 390x660x409(mm) 424x740x437(mm)
Gross Weight 14kg 16.5kg 21kg 31kg

P55
 FHE Series
Pro Active Speakers

FHE12
FHE212 FHE15
FHE215

FHE18S

FHE18SA

Cutaway view

Model FHE212 FHE215 FHE18S

Type 2-way2x12" Passive Speaker 2-way2x15" Passive Speaker 18" Passive sunbwoofer
Frequency response 50Hz~20kHz(-10dB) 45Hz~20kHz(-10dB) 31Hz~200Hz(-10dB)
Max. SPL 133dB 135dB 133dB
Sensitivity(1W@1m) 99dB 100 dB 98dB
Nominal Impedance 4Ω 4Ω 8Ω
Power handling 650W (continuous) , 2600W (peak) 800W (continuous) , 3200W (peak) 700W (continuous) , 2800W (peak)
Coverage(HxV) 90°x60°( Rotatable ) 90°x60°( Rotatable ) /
Crossover Freq 2.2kHz 2.2kHz /
LF 12”MF/LF / 75mm Voice Coil 15”MF/LF / 75mm Voice Coil 18”MF/LF / 100mm Voice Coil
HF Ti / PEN diaphragm / 75mm Voice Coil Ti / PEN diaphragm / 75mm Voice Coil /
Dimension(WxHxD) 405x989x445(mm) 450x1153x508(mm) 568x627x710(mm)
Gross Weight 31kg 45kg 46.5kg

P56
K Series
Engineering Speaker Series

EXCELLENT QUALITY SPEAKER OF THE YEAR 2008

CERTIFICATE BY CETA
In the “Excellent Quality Speaker of the Year 2008 Selection” hold on February, 2008 by China
Entertainment Technology Association, experts evaluate Soundking speaker as “beautiful and soft tone,
better balance; all types of musical instruments sound natural and true, with better restoring ability. Treble
bright, structured and effective, high definition and in electro-acoustical performance aspect, K212 has
smooth impedance curve, high sensitivity, and low distortion."
K212 is one member of the Soundking “K” series family, with Soundking engineers’ tremendous efforts,
and after careful comparison, K212 and K215 were chosen as the representative to participation in this
grand event. With innumerable test in the sound reinforcement projects, its success has proved the
excellent quality of K series speakers.

K215

K2215 K210

K2212

K1218S K18S

K212F K215F

Instruction:
K series speaker is specially designed for projects application. and true, with better restoring ability; treble bright, structured and
W ith a wide range of specifications, and optimized effective, high definition, K series speaker is optimal for all sound
configuration, this series may adapt many kinds of sound reinforcement projects.
reinforcement projects.
Applications:
Features: K series speaker can be widely applied for large-scale theater, live
With good appeal, compact, and convenient to install and performance, stadium, mobile performance and all other sound
pack; high power and stability; beautiful and soft tone, better reinforcement projects.
balance; all types of musical instruments sound natural

P57
 K Series
Engineering Speaker Series

K210
K212
K215

Cutaway view

Model K210 K212 K215

Type 2-way 10” full range speaker 2-way 12” full range speaker 2-way 15” full range speaker
Frequency response 70Hz-18kHz (-10dB) 65Hz-18kHz (-10dB) 60Hz-18kHz (-10dB)
Sensitivity(1W@1m) 96dB 97dB 98dB
Nominal Impedance 8Ω 8Ω 8Ω
Power handling 250W (continuous), 1000W (peak) 300W (continuous), 1200W (peak) 400W (continuous), 1600W(peak)
Crossover 2.2kHz 2kHz 1.8kHz
LF 10” middle and bass/65mm voice coil 12” middle and bass/75mm voice coil 15” middle and bass/75mm voice coil
HF PK membrane/44mm voice coil PK membrane/44mm voice coil Ti/ PK composite membrane/75mm voice
coil/neodymium magnet
Coverage(HxV) 90°x50° 90°x50° 80°x50°
Max. SPL 126dB 128dB 130dB
Dimension(WxHxD) 308x502x320(mm) 358x581x380(mm) 418x708x425(mm)
Weight 20kg 25kg 31kg

P58
K Series
Engineering Speaker Series

K2212
K2215

Cutaway vie
view

Model K2212 K2215

Type 2x12" 2-way full range speaker 2x15" 2-way full range speaker
Frequency response 50Hz~18kHz(-10dB) 45Hz~18kHz(-10dB)
Sensitivity(1W@1m) 99dB 100dB
Nominal Impedance 4Ω 4Ω
Power handling 600W (continuous), 2400W (peak) 800W (continuous), 3200W (peak)
Crossover 1.7kHz 1.6kHz
LF 2x12” MF/LF/75mm voice coil 2x15” MF/LF/75mm voice coil
HF Ti / PK diaphragm / 75mm voice coil / neodymium magnet Ti / PK diaphragm / 75mm voice coil / neodymium magnet
Coverage(HxV) 80°x50° 80°x50°
Max SPL 133dB 135dB
Dimension(WxHxD) 418x917x410 (mm) 481x1076x480 (mm)
Weight 41kg 49kg

P59
 K Series
Engineering Speaker Series

K18S
K1218S

K18S Cutaway view K1218S Cutaway view

Model K18S K1218S

Type 18"Low-frequency 2x18”woofer
Frequency Response 40Hz~150Hz(-10dB) 35Hz~150Hz(-10dB)
LF 18" / 100mm Voice coil 2x18”/(100mm) voice coil
Sensitivity (1W@1M) 97dB 100dB
Nominal Impedance 8Ω 4Ω
Power handling 600W (continuous), 2400W(peak) 1200W (continuous), 4800W(peak)
Max. SPL 131dB 137dB
Dimensions (WxHxD) 568x627x710 (mm) 1236x568x710(mm)
Weight 46kg 82kg

P60
K Series
Engineering Speaker Series

K212F
K215F

The membrane (i.e. paper cone) is mainly composed of the paper pulp and the carbon filament, light,
and with high rigidity. The paper cone dimension is comparatively big, the intermediate frequency
response and transient response are super.

Cutaway view

Model K212F K215F

Type 2-way 12” full range speaker 2-way 15” full range speaker
Frequency response 65Hz~18kHz(-10dB) 60Hz~18kHz(-10dB)
Sensitivity(1W@1m) 97 dB 98 dB
Nominal Impedance 8Ω 8Ω
Power handling 300W (continuous), 1200W (peak) 400W (continuous), 1600W (peak)
Crossover 2kHz 1.8kHz
LF 12” MF/LF/75mm voice coil 15” middle and bass/75mm voice coil
HF PK membrane/44mm voice coil Ti / PK diaphragm / 75mm voice coil / neodymium magnet
Coverage(HxV) 90°x50° 80°x50°
Max SPL 128dB 130dB
Dimension(WxHxD) 380x585x383(mm) 445x706x431(mm)
Weight 25kg 31kg

P61
 KA Series
Entertainment Audio System

KA215
KA215A
KA12
KA12A

KA15
KA15A KA10
KA10A

KA1512
KA1512A
KA1815
KA1815A KA15S
KA15SA

KA18S
KA218S KA18SA

KA15M
KA15MA

Instruction:
Soundking“KA”series speaker is designed specially for stage engineering application. It features new aspects, complete
specification, and economical configuration. Its furnishing can be painting or velvet for option according to the different needs.
And it is applicable for bar, coffee hall, club, middle& small performance locations, etc.

Features:
> Cabinet adopts MDF, strong strength, and is very economical.
> Woofer adopts high temperature-resistant KAPTON voice coil frame, high efficient magnetic circuit design.
> Tweeter adopts aluminum diaphragm and PEN diaphragm, accurate phase corrector ensure the cleanness of high frequency .
> Accurately designed crossover network ensure the speaker’s sound quality can be reproduced truly.
> It sets build-in LC crossover with high frequency protection of low distortion.
> It features 12 M10 hanging system, convenient and safe hanging setting.
> ĭ35mm bracket holes ensure the stability of product fixed installation.

P62
KA Series
Active Entertainment Audio System

KA10A
KA12A
KA15A
MIC input MIC volume control

LINE volume control

LINE input

HIGH tone control

LINE output
LOW tone control
80Hz low cut switch

Voltage selection swith

AC socket Power switch

KA10A/KA12A/KA15A Rear Panel

452.6

Cutaway view
409

353.5
710
628
555

Model KA10A KA12A KA15A

Type 10 " 2way active speaker 12 " 2way active speaker 15 " 2way active speaker
Frequency response 60Hz-20kHz(-10dB) 50Hz-20kHz(-10dB) 45Hz-20kHz(-10dB)
Sensitivity(1W@1m) -10dBV±1dBV -10dBv±1dBv -10dBv±1dBv
Amp power rated 200W 250W 250W
Crossover 2.0kHz 2.2kHz 2.0kHz
LF 10" woofer 50 mm voice coil 12" woofer 65 mm voice coil 15" woofer 65 mm voice coil
HF 34mm driver/1inch exit 34mm driver/1inch exit 34mm driver/1inch exit
Coverage(HxV) 80°x60° 80°x60° 80°x60°
Max SPL 121dB 123dB 123dB
Dimension(WxHxD) 353.5x555x426(mm) 409x628x472 (mm) 452.6x710x518(mm)
Weight 20.8kg 25.5kg 31.3kg

P63
 KA Series
Active Entertainment Audio System

KA10
KA12
KA15

452.6

Cutaway view
409

353.5

710
628
555

Model KA10 KA12 KA15

Type 10" 2 way passive speaker 12" 2 way passive speaker 15" 2way passive speaker
Frequency response 60Hz—20kHz(-10dB) 50Hz—20kHz(-10dB) 45Hz—20kHz(-10dB)
Sensitivity(1W@1m) 94dB 96dB 96dB
Nominal Impedance 8Ω 8Ω 8Ω
Power handling 200W( continuous), 800W (peak) 250W( continuous),1000W (peak) 250W( continuous), 1000W (peak)
Crossover 2.0kHz 2.2kHz 2.0kHz
LF 10" LF/50mm voice coil 12" LF/65mm voice coil 15" LF/65mm voice coil
HF 34mm driver/1" exit 34mm driver/1" exit 34mm driver/1inch exit
Coverage(HxV) 80°x60° 80°x60° 80°x60°
Max SPL 121dB 123dB 123dB
Input mode 2×SPEAKON+2×JACK 2×SPEAKON+2×JACK 2×SPEAKON+2×JACK
Dimension(WxHxD) 353.5x555x426 (mm) 409x628x472 (mm) 452.6x710x518 (mm)
Weight 19.1kg 23kg 28.6kg

P64
KA Series
Active Entertainment Audio System

MIC volume control TREBLE control

MIC volume control BASS control

KA215A
LINE in 80Hz low cut switch

LINE in LIM output

Breaker Power switch

Voltage selection switch AC socket

KA215A Rear Panel

KA215A Cutaway view

471.7 538

Bottom wheels for easy moving

Model KA215A
Type 2x15 " active woofer
Frequency response 40Hz-20kHz(-10dB)
Sensitivity(1W@1m) -10dBv±1dBv
Amp power rated 500W
Crossover 2.2kHz
LF 2x15" woofer 65 mm voice coil
HF 44mm compression driver /1 inch exit
Coverage(HxV) 80°x60°
Max SPL 129dB
Dimension(WxHxD) 471.7X1050X538(mm)
Weight 54.7kg

P65
 KA Series
Passive Entertainment Audio System

KA215

KA215 Cutaway view

Model KA215
Type 2×15 " two way passive full range speaker
Frequency response 40Hz-20kHz(-10dB)
Sensitivity(1W@1m)) 99dB Bottom wheels for easy moving
Nominal Impedance 4Ω
Power handling 500W( continuous), 2000W (peak)
Crossover 2.2kHz
LF 2x15" LF /65mm voice coil
HF 44mm compression driver /1 inch exit
Coverage(HxV) 80°x60°
Max SPL 129dB
Input mode 2×SPEAKON+2×JACK
Dimension(WxHxD) 469x1050x538 (mm)
Weight 48kg

P66
KA Series
Active Entertainment Audio System

KA1512A
(KA15SA+KA12A)

KA18SA Cutaway view

KA15SA Cutaway view

Model KA15SA KA18SA

Type 15" active subwoofer 18" active subwoofer
Frequency response 35Hz-250Hz(-10dB) 38Hz-250Hz(-10dB)
Sensitivity(1W@1m) -10dBu±0.5 dBu -10dBu±0.5 dBu
Amp power rated 400W 500W
LF 15" woofer 75mm voice coil 18" woofer 75mm voice coil
Max SPL 125dB 126dB
Dimension(WxHxD) 479x581x548 (mm) 567x667x600 (mm)
Weight 47.6kg 57.8kg

P67
 KA Series
Passive Entertainment Audio System

KA1815
(KA18S+KA15)

KA15S Cutaway view

KA18S Cutaway view

Model KA15S KA18S

Type 15 " subwoofer 18 " subwoofer
Frequency response 40Hz-250Hz(-10dB) 38Hz-250Hz(-10dB)
Sensitivity(1W@1m)Nominal 96dB 96dB
Impedance 8Ω 8Ω
Power handling 600W( continuous), 2400W (peak) 600W( continuous), 2400W (peak)
LF 15" woofer/100mm voice coil 18" woofer/100mm voice coil
Max SPL 127dB 127dB
Input mode 2×SPEAKON+2×JACK 2×SPEAKON+2×JACK
Dimension(WxHxD) 479x581x548 (mm) 567x667x600(mm)
Weight 35.2kg 47.5kg

P68
KA Series
Entertainment Audio System

KA15M (Passive)
KA15MA (Active)
KA218S

KA15M/KA15MACutaway view

KA218S Cutaway view

Model KA15M KA15MA Model KA218S

Type 15" 2way passive speaker 15" 2way active speaker Type 2x18" Subwoofer
Frequency response 45Hz-20kHz(-10dB) 45Hz-20kHz(-10dB) Frequency response 33Hz-150Hz
Sensitivity(1W@1m) 97dB -10dBv±1dBv Sensitivity(1W@1m) 100dB
Nominal Impedance 8Ω / Power handling 1200W( continuous), 4800W (peak)
Power handling 250W( continuous), 1000W (peak) 250W Max SPL 131dB
Crossover 2.2kHz 2.2kHz LF 2x18" woofer 100mm voice coil
LF 15" LF/65mm voice coil 15" woofer 65mm voice coil Dimension(WxHxD) 1200x520x700 (mm)
HF 34mm driver/1inch exit 34mm driver/1" exit Weight 84kg
Coverage(HxV) 80°x60° 80°x60°
Max SPL 124dB 124dB
Input mode 2×SPEAKON+2×JACK /
Dimension(WxHxD) 429x635x484 (mm) 429X635X484(mm)
Weight 22kg 24.7kg

P69
 KK Series
Entertainment Audio System

KK10

KK15
KK12

KK153

KK18S

KK15S

Instruction:
Based on advanced circuit
ced cir
circui
cuitt and electro-acoustic
a nd ele
electr
ctro-a
o-acou s c ttechnology,
cousti echnology ogy,,
Soundking KK entertainment specially
ertainment loudspeakers are speci designed
ialllly des
d i ed
ign d
to reproduce powerful
erful bass, round MF, clear treble. The unique and > Tweeter adopts Ti/polyimide diaphragm and Alu winding
concise enclosure is designed by CAD. They can be used with many voice coil to ensure delicate
subwoofers together, and are the optimal models for entertainment > Tone. 15" 18" or 21" subwoofer can be used for the system
application. to enhance more powerful bass.
> Twelve M10 suspension points make quick and reliable
Features: setup.
> Unique and elegant enclosure. Black environment protection
imported from Germany; Application:
> RDM cone and dual winding voice coil for woofer ensures wide Bar, disco, entertainment places;
dynamic operation.

P70
KK Series
Entertainment Project Speaker Series

KK12

KK10

KK10 Cutaway view KK12 Cutaway view

Model KK10 KK12

Type 10" 2-way full range speaker 12" 2-way full range speaker
Frequency response 65Hz-18kHz(±3dB) 55 Hz-18 kHz(±3dB)
Sensitivity(1W@1m) 96 dB 97 dB
Nominal Impedance 8Ω 8Ω
Power handling 250W(Continuous), 1000W(peak) 300W(Continuous), 1200W(peak)
Crossover 2.2kHz 2kHz
LF 10 "LF/MF / 65mm voice coil 12 "LF/MF / 75 mm voice coil
HF polyimide diaphragm / 44mm voice coil polyimide diaphragm / 44 mm voice coil
Coverage (HxV) 70 °x70 ° 90 ° x 50 °
Max.SPL 126dB 128dB
Connection socket 2XNL4MP 2XNL4MP
Dimension (WxHxD) 325x484x308 (mm) 369x570x348 (mm)
Weight 17kg 24 kg

P71
 KK Series
Entertainment Project Speaker Series

KK153

KK15

KK15 Cutaway view KK153 Cutaway view

Model KK15 KK153

Type 15" 2-way full range speaker 3-way dual driver 15” full range loudspeaker
Frequency response 50 Hz-18 kHz(±3dB) 55 Hz-18 kHz(±3dB)
Sensitivity(1W@1m) 98 dB LF: 97dB, MF+HF: 103 dB
Nominal Impedance 8Ω LF:8Ω, MF+HF:8Ω
Power handling 400W(Continuous) ,1600W(peak) LF:500W(Continuous) ,2000W(peak)
MF+HF:150W(Continuous) ,600W(peak)
Crossover 1.5kHz 650Hz Active, 3.3kHz passive
LF 15 "LF/MF / 75 mm voice coil 15 "LF/MF / 100 mm voice coil
MF / 6.5” mid range
HF polyimide diaphragm/75mm voice coil Alu diaphragm 34mm voice coil tweeter(Nd magnet)
Coverage(HxV) 80 ° x 50 ° 65 ° x 40 °
Max.SPL 130dB 132dB
Connection socket 2XNL4MP 2XNL4MP
Dimension (WxHxD) 441x690x400 (mm) 459x720x416 (mm)
Weight 31 kg 35 kg

P72
KK Series
Entertainment Project Speaker Series

KK18S

KK15S

KK15S Cutaway view KK18S Cutaway view

Model KK15S KK18S

Type 1x15” woofer 18” woofer
Frequency response 30 Hz-220Hz(±3dB) 40 Hz-200Hz(±3dB)
Sensitivity(1W@1m) 95dB 97dB
Impedance 8Ω 8Ω
Power handling 400W (continuous), 1600W(peak) 700W (continuous), 2800W (peak)
LF 15 " / 75 mm voice coil 18 " / 100 mm voice coil
Max.SPL 127dB 132dB
Connection socket 2XNL4MP 2XNL4MP
Dimension (WxHxD) 518x635x490 (mm) 590x722x575 (mm)
Weight 31 kg 45kg

P73
 KJ Series
Active &Passive Entertainment Audio System

KJ215
KJ215A

KJ12
KJ12A

KJ15
KJ15A

KJ10
KJ10A

KJ18S
KJ18SA KJ15M
KJ15MA

Introduction: Features:
KJ series (active and passive) are the newly designed >Black carpet finish,metal corners,unique contour;
products which feature high sensitivity, high SPL, unique >High efficiency, low distortion class D power amplifier;
and graceful contour, high performance but low cost. The >Bright and full treble,powerful bass,clear vocal;
metal grille protects the components inside. The whole series Application:
consists of 12 models.Each model can be mounted on Suitable for the professional reinforcement application, e.g.
35mm speaker stand and is designed with recessed handle, stage show, touring show, bar,etc;
and KJ215 has castors for easy transportation.

P74
KJ Series
Active Entertainment Audio System

KJ10A
KJ12A
KJ15A

KJ15A Rear Panel

KJ10A Cutaway view KJ12A Cutaway view KJ15A Cutaway view

450
402
340
690
615
509

Model KJ10A KJ12A KJ15A

Type 10 ” active loudspeaker 12 ” active loudspeaker 15 ” active loudspeaker
Frequency response 60Hz-20kHz(-10dB) 55Hz-20kHz(-10dB) 45Hz-20kHz(-10dB)
Input sensitivity 0dBu±0.5dBu 0dBu±0.5dBu 0dBu±0.5dBu
Amp power rated 250W(LF),50W(HF) 250W(LF),60W(HF) 250W(LF),60W(HF)
Crossover 2.0kHz 2.2kHz 2.0kHz
LF unit 10" woofer 50mm voice coil 12" woofer 65mm voice coil 15" woofer 65mm voice coil
HF unit 34 mm compression driver/1 inch exit 34 mm compression driver/1 inch exit 34 mm compression driver/1 inch exit
Coverage(HXV) 80°x60° 80°x60° 80°x60°
Max SPL 123dB 124dB 125dB
Dimension(WXHXD) 340×509×332(mm) 402×615×413(mm) 450×690×465(mm)
Weight 18.4kg 24.7kg 30kg

P75
 KJ Series
Active Entertainment Audio System

KJ15MA KJ18SA KJ18SA Rear Panel

KJ215A

KJ215A Cutaway view

470.5

KJ15MA Cutaway view KJ18SA Cutaway view

720 540
1047

661
460

Model KJ215A KJ15MA KJ18SA

Type 2 x 15 " active loudspeaker 15 " active monitor 18 " active subwoofer
Frequency response 45Hz-20kHz(-10dB) 43Hz-20kHz(-10dB) 33Hz-250Hz(-10dB)
Input sensitivity -5dBv 0dBu±0.5dBu -10dBu±2dBu
Amp power rated 700W(LF),80W(HF) 250W(LF),60W(HF) 900W
Crossover 2.0kHz 2.0kHZ
LF unit 2 x 15" woofer 75mm voice coil 15" woofer 65mm voice coil 18" woofer 100mm voice coil
HF unit 44 mm compression driver/1 inch exit 44 mm compression driver/1 inch exit
Coverage(HxV) 80°x60° 80°x60°
Max SPL 130dB 125dB 130dB
Boottom wheels
Dimension(WxHxD) 470.5×1047×477(mm) 720×460×404(mm) 540×661×622(mm)
for easy moving
Weight 51kg 28.6kg 53.6kg

P76
KJ Series
Passive Entertainment Audio System

KJ10
KJ12
KJ15

KJ10 Cutaway view KJ12 Cutaway view KJ15 Cutaway view

450
402
340

690
615
509

Model KJ10 KJ12 KJ15

Type 10 ” passive loudspeaker 12 ” passive loudspeaker 15 ” passive loudspeaker
Frequency response 65Hz-20kHz(-10dB) 55Hz-20kHz(-10dB) 45Hz-20kHz(-10dB)
Sensitivity(1W@1m) 94dB 95dB 96dB
Nominal Impedance 8 Ohm 8 Ohm 8 Ohm
Power handling 200W(coutinuous),800W(Peak) 250W(coutinuous),1000W(Peak) 350W(coutinuous),1400W(Peak)
Crossover 2.7kHz 2.7kHz 2.5kHz
LF unit 10" woofer 50mm voice coil 12" woofer 65mm voice coil 15" woofer 75mm voice coil
HF unit 34 mm compression driver/1 inch exit 34 mm compression driver/1 inch exit 34 mm compression driver/1 inch exit
Coverage(HXV) 80°x60° 80°x60° 80°x60°
Max SPL 123dB 125dB 127dB
Dimension(WXHXD) 340×509×332(mm) 402×615×413(mm) 450×690×465(mm)
Weight 16.8kg 23kg 29.5kg

P77
 KJ Series
Passive Entertainment Audio System

KJ215 KJ15M KJ18S

KJ215 Cutaway view

470.5

KJ15M Cutaway view KJ18S Cutaway view

720 540
1047

661
460

Model KJ215 KJ15M KJ18S

Type 15 ” passive loudspeaker 15 ” passive monitor 18 ” passive subwoofer
Frequency response 40Hz-20kHz(-10dB) 45Hz-20kHz(-10dB) 33Hz-250Hz(-10dB)
Sensitivity(1W@1m) 98dB 96dB 97dB
Nominal Impedance 4 Ohm 8 Ohm 8 Ohm
Power handling 700W(coutinuous),2800W(Peak) 350W(coutinuous),1400W(Peak) 500W(coutinuous),2000W(Peak)
Crossover 2.0kHz 2.4kHz
LF unit 15" woofer 75mm voice coil 15" woofer 75mm voice coil 18" woofer 100mm voice coil
HF unit 44 mm compression driver/1 inch exit 34 mm compression driver/1 inch exit
Coverage(HXV) 80°x60° 80°x60°
Max SPL 132dB 127dB 130dB Boottom wheels
Dimension(WXHXD) 470.5×1047×477(mm) 720×460×404(mm) 540×661×662(mm) for easy moving
Weight 47.1kg 27.3kg 51.5kg

P78
L Series
Engineering Speaker Series

L12

L15

L10
L215

L212

L18S

L218S

Features:
> LF section adopts copper/aluminum voice coil, magnetic circuit with high efficiency of dissipation;
> HF section adopts accurate phase corrector, excellent Titanium diaphragm;
> Switching between LC crossover and external crossover can meet demanding mixing requirement. HF protection circuit makes
distortion low;
> Five aluminum bars for easy hanging;
> Tray with two holes for easy and quick set up.

Applications:
Suitable for the applications in multi-purpose hall, show hall, meeting room and auditorium.

P79
 L Series
Engineering Speaker Series

L10
L12
L15

Cutaway view

Model L10 L12 L15

Type 10”two way full range cabinet 12”two way full range cabinet 15”two way full range cabinet
Frequency response 55Hz~20kHz (-10dB) 50Hz~20kHz(-10dB) 43Hz~20kHz(-10dB)
60Hz~18kHz (±3dB) 55Hz~18kHz(±3dB) 48Hz~18kHz(±3dB)
Sensitivity(1W@1m) 94 dB 94 dB 97 dB
Nominal Impedance 8Ω 8Ω 8Ω
Power handling 250W (continuous), 1000W (peak) 500W (continuous), 2000W (peak) 600W (continuous), 2400W (peak)
Crossover 2kHz 1.4kHz 1.5kHz
LF 10" MF/LF / 65mm Voice coil 12" MF/LF / 100mm Voice coil 15" MF/LF / 100mm Voice coil
HF PK Diaphragm / 34mm Voice coil Ti/PEN Daphragm / 75mm Voice coil Ti/PEN Daphragm / 75mm Voice coil
Coverage(HxV) 90°x40° 80°x60° 80°x60°
Max. SPL 124dB 128dB 131dB
Dimension(WxHxD) 310x530x290 (mm) 380x660x367.5(mm) 430x760x418.6(mm)
Weight 22kg 34kg 41kg

P80
L Series
Engineering Speaker Series

L212
L18S L218S L215

Cutaway view

Model L212 L215 L18S L218S

Type 2X12”two way full range cabinet 2X15”two way full range cabinet 18”woofer Dual 18” woofer
Frequency response 50Hz~20kHz(-10dB) 43Hz~20kHz(-10dB) 33Hz~150Hz (-10dB) 33Hz~150Hz (-10dB)
55Hz~18kHz(±3dB) 48Hz~18kHz(±3dB) 40Hz~125Hz (±3dB) 40Hz~125Hz (±3dB)
Sensitivity(1W@1m) 99dB 99dB 98dB 103dB
Nominal Impedance 4Ω 4Ω 8Ω 4Ω
Power handling 600W (continuous), 2400W (peak) 1000W (continuous), 4000W (peak) 700W (continuous), 2800W (peak) 1400W (continuous), 5600W (peak)
Crossover 1.4kHz 1.4kHz 150Hz 150Hz
LF 2X12”MF/LF / 75mm Voice coil 2X15”MF/LF / 100mm Voice coil 18" / 100mm Voice coil 2X18" / 100mm Voice coil
HF Ti/PK Diaphragm / 75mm Ti/PK diaphragm / 75mm / /
Voice coil / neodymium magnet Voice coil / neodymium magnet / /
Coverage(HxV) 80°X60° 80°X60° / /
Max. SPL 133dB 135dB 134dB 134dB
Dimension(WxHxD) 428x920x426(mm) 494x478x1090(mm) 556x650x653 (mm) 1032x620x720 (mm)
Weight 58.5kg 61kg 46kg 84kg

P81
 H Series
Stage Speaker Series

Instruction:
H series of cabinets adopt high quality components. HF is equipped with over current protection and PTC protection to
improve the cabinet reliability. H series of cabinets are suitable for touring show, meeting room, multi-purpose hall, bar,
club, etc.
Features:
>Elegant appearance, environmental protection water-paint;
>Wearable, solid, water-proof wooden box
>High power/sensitivity, sweet tone, rich human voice, powerful bass
>Over-current protection and PTC protection for HF
>Twelve M10 flying points for quick set up and adjustment

Applications:
>Reinforcement system for touring show, meeting room, multi-purpose hall, bar, club, etc;
>Auxiliary system in medium/large meeting room, auditorium, etc;

H215

H15

H12 H18S
H10

H08

P82
H Series
Stage Speaker Series

H08
H10
H12
H15

441

379
Cutaway view
326
268
666
569
484
420

Model H08 H10 H12 H15

Type 2-way 8”full range cabinet 2-way 10”full range cabinet 2-way 12” full range cabinet 2-way 15”full range cabinet
Frequency response 75Hz~20kHz (-10dB) 55Hz~20kHz (-10dB) 50Hz~20kHz(-10dB) 45Hz~20kHz(-10dB)
Sensitivity(1W@1m) 92 dB 94 dB 96 dB 97 dB
Nominal Impedance 8Ω 8Ω 8Ω 8Ω
Power handling 150W (continuous), 600W (peak) 200W (continuous), 800W (peak) 300W (continuous), 1200W (peak) 400W (continuous), 1600W (peak)
Crossover 2.7kHz 2.5kHz 2.5kHz 2.5kHz
LF 8" MF/LF / 50mm voice coil 10" MF/LF / 65mm voice coil 12" MF/LF / 75mm voice coil 15" MF/LF / 75mm voice coil
HF PEN diaphragm / 34mm voice coil PEN diaphragm/ 34mm voice coil PEN diaphragm / 44mm voice coil PEN diaphragm / 44mm voice coil
Coverage(HxV) 90°x40° 90°x40° 90°x60° 90°x60°
Max. SPL 120dB 123dB 127dB 129dB
Weight 11Kg 18.5kg 24.5Kg 32Kg
Dimension(WxHxD) 268x420x247 (mm) 326x484x319 (mm) 379x569x369(mm) 441x666x427(mm)

P83
 H Series
Stage Speaker Series

H215
H18S

Cutaway view
475
1060

Model H215 H18S

Type 2x15”two way full range cabinet 18”Subwoofer
Frequency response 45Hz~20kHz (-10dB) 40Hz~150Hz(-10dB)
Sensitivity(1W@1m) 100dB 97dB
Nominal Impedance 4Ω 8Ω
Power handling 800W (continuous), 3200W (peak) 600W(continuous), 2400W (peak)
Crossoer 1.8kHz 150Hz
LF 2x15" MF/LF / 75mm voice coil 18" / 100mm voice coil
HF Ti/PEN composite membrane / 75mm voice coil /
Coverage(HxV) 80°x60° /
Max SPL 131dB 129dB
Weight 54kg 46kg
Dimension(WxHxD) 475x1060x444 (mm) 572x631x704.4 (mm)

P84
FPH Series
Plastic Speaker

FPH12

FPH10

FPH15
PS0115S-G

P85
 FPH Series
Plastic Speaker

Instruction:
FPH10
FPH professional active plastic speaker consist of three active models: FPH12
FPH15A , FPH12A and FPH10A. They both can equip a 15”subwoofer for FPH15
the extended low frequency.
The FPH series are built by rugged and ultra-light gas-injected
polypropylene enclosure. This elaborately design enclosure effectively avoid
the forming of standing wave. The high quality woofer features high power
and low distortion, the compression driver is made by a 44mm PEEK
diaphragm. FPH series deliver clear, smooth sound. Its outstanding sound
capability can be maximum performed under high dynamic condition. The
high efficiency“CLASS-D”amplifier adopts switching mode power of wide-
range voltage from 100V-240V, which make FPH much lighter than the
“CLASS-D”amplifer but getting the equal sound. FPH is equipped with
three handles, which is more convenient for carry..
FPH15\FPH12\FPH10 are same size’s passive version.
The FPH is designed for meeting room, multi-function hall, music hall, hotel,
coffee bar etc

Features:
>High efficiency“CLASS-D”amplifier, high power, low distortion, excellent
sound quality.
>Switching mode power supply for light weight, accommodate wide-range
voltage from 100V~240V.
>Outstanding performance woofer produce high power, low distortion.
>Constant directivity horn for even coverage.
>Rugged and ultra-light gas-injected polypropylene enclosure
>EQ BOOST to optimize the frequency response, compressor limit LED
indication, over heat LED indication.
>Multi-angle cabinet design make FPH can be used for stage monitor.
>Three handles make the carry more convenient.
>5xM10 suspension points for a quick and reliable installation. Can be pole
mounted on a 35mm stand.

Model FPH10 FPH12 FPH15

Type 10” 2-way Passive Speaker 12” 2-way Passive Speaker 15” 2-way Passive Speaker
Frequency Response 65Hz~18kHz(±3dB) 60Hz~18kHz(±3dB) 55Hz~18kHz(±3dB)
55Hz~20kHz(-10dB) 50Hz~20kHz(-10dB) 45Hz~20kHz(-10dB)
Sensitivity(1W@1m) 95dB 97dB 99dB
Power Handling 250W (continuous), 1000W (peak) 400W (continuous), 1600W (peak) 400W (continuous), 1600W (peak)
Coverage (HxV) 90°x60° 90°x60° 90°x60°
Nominal Impedance 8Ω 8Ω 8Ω
Crossover 2.2kHz 1.9kHz 1.9kHz
LF 1X10”Woofer 1X12”Woofer 1X15”Woofer
HF 1X 34mm HF Compression Driver (1”Exit) 1X 44mm HF Compression Driver (1”Exit) 1X 44mm HF Compression Driver (1”Exit)
Max. SPL 125dB 129dB 131dB
Input Connector/ Output Connector 2xSPEAKON 2xSPEAKON 2xSPEAKON
Dimension (W x H x D) 335x545x319mm 390x630x360mm 450x710x370mm
Net Weight 13kg 20kg 25kg

P86
FPH Series
Plastic Speaker

FPH10A
FPH12A
FPH15A

Cutaway view
348
557

Model FPH10A FPH12A FPH15A

Type 10”2-way Active Speaker 12”2-way Active Speaker 15”2-way Active Speaker
Frequency Response 65Hz~18kHz(±3dB) 60Hz~18kHz(±3dB) 55Hz~18kHz(±3dB)
55Hz~20kHz(-10dB) 50Hz~20kHz(-10dB) 45Hz~20kHz(-10dB)
Input Sensitivity 0dBu 0dBu 0dBu
Power Handling (RMS) 250W (LF) 500W (LF) 500W (LF)
70W (HF) 100W (HF) 100W (HF)
Coverage (HxV ) 90°x60° 90°x60° 90°x60°
Crossover 2.2kHz 1.8kHz 1.8kHz
LF 1X10”Woofer 1X12”Woofer 1X15”Woofer
HF 1X 34mm HF Compression Driver (1”Exit) 1X 44mm HF compression driver (1”Exit) 1X 44mm HF compression driver (1”Exit)
Max. SPL 121dB 125dB 127dB
Input Connector/ Output Connector Combo(XLR / JACK),XLR Combo(XLR / JACK),XLR Combo(XLR / JACK),XLR
Dimension (W x H x D) 348x557x330mm 390x630x360mm 450x710x370mm
Net Weight 14kg 20kg 26kg
Rated Voltage AC 110/230V, 50-60Hz AC 100-240V/50-60Hz AC 100-240V/50-60Hz

P87
 FPH Series
Plastic Speaker

Instruction:
FPH professional active plastic speaker consist of three active models:
FPH10AU
FPH15AU, FPH12AU and FPH10AU . They both can equip a 15” FPH12AU
subwoofer for the extended low frequency. FPH15AU
The FPH series are built by rugged and ultra-light gas-injected
polypropylene enclosure. This elaborately design enclosure effectively avoid
the forming of standing wave. The high quality woofer features high power
and low distortion, the compression driver is made by a 44mm PEEK
diaphragm. FPH series deliver clear, smooth sound. Its outstanding sound
capability can be maximum performed under high dynamic condition. The
high efficiency“CLASS-D”amplifier adopts switching mode power, which
make FPH much lighter than the “CLASS-D”amplifer but getting the equal
sound. MP3/Bluetooth is more convenient for signal transmission. FPH is
equipped with three handles, which is more convenient for carry.
The FPH is designed for meeting room, multi-function hall, music hall, hotel,
coffee bar etc

Features:
>High efficiency “CLASS-D”amplifier, high power, low distortion, excellent
sound quality.
>Switching mode power supply for light weight.
>Outstanding performance woofer produce high power, low distortion.
>Constant directivity horn for even coverage.
>Rugged and ultra-light gas-injected polypropylene enclosure
>EQ BOOST to optimize the frequency response, compressor limit LED
indication, over heat LED indication.
>MP3/Bluetooth is more convenient for signal transmission
>Multi-angle cabinet design make FPH can be used for stage monitor.
>Three handles make the carry more convenient.
>5xM10 suspension points for a quick and reliable installation. Can be pole
mounted on a 35mm stand.

Model FPH10AU FPH12AU FPH15AU

Type 10” 2-way Active Speaker 12” 2-way Active Speaker 15” 2-way Active Speaker
Frequency Response 70Hz~20kHz(±3dB) 60Hz~18kHz(±3dB) 55Hz~18kHz(±3dB)
60Hz~20kHz(-10dB) 50Hz~20kHz(-10dB) 45Hz~20kHz(-10dB)
Input Sensitivity 0dBu 0dBu 0dBu
Power Handling (RMS) 250W (LF) 500W (LF) 500W (LF)
70W (HF) 100W (HF) 100W (HF)
Coverage (HxV ) 90°x60° 90°x60° 90°x60°
Crossover 2.5 kHz 1.8kHz 1.8kHz
LF 1X10” Woofer 1X12”Woofer 1X15”Woofer
HF 1X 34mm HF compression driver (1”Exit) 1X 44mm HF compression driver (1”Exit) 1X 44mm HF compression driver (1”Exit)
Max. SPL 121dB 125dB 127dB
Input Connector/ Output Connector Combo(XLR / JACK),XLR Combo(XLR / JACK),XLR Combo(XLR / JACK),XLR
Dimension (W x H x D) 348x557x330(mm) 390x630x360mm 450x710x370mm
Net Weight 14kg 20kg 25kg
Rated Voltage AC 110/230V,50-60Hz AC 110/230V,50-60Hz AC 110/230V,50-60Hz

P88
FPH Series
Plastic Speaker

Instruction:
FPH professional active plastic speaker consist of two active models: FPH10N
FPH15AN and FPH12AN . They both can equip a 15”subwoofer for FPH12N
the extended low frequency. FPH15N
The FPH series are built by rugged and ultra-light gas-injected
polypropylene enclosure. This elaborately design enclosure
effectively avoid the forming of standing wave. It consists of 400W
NdFeB Magnets LF paper cone speaker and NdFeB Magnets HF
compression driver. FPH series deliver clear, smooth sound. FPH
series deliver clear, smooth sound. Its outstanding sound capability
can be maximum performed under high dynamic condition. The high
efficiency“CLASS-D”amplifier adopts switching mode power of wide-
range voltage from 100V-240V, which make FPH much lighter than the
“CLASS-D”amplifer but getting the equal sound. FPH is equipped with
three handles, which is more convenient for carry..
FPH15N&FPH12N are same size’s passive version.
The FPH is designed for meeting room, multi-function hall, music hall,
hotel, coffee bar etc

Cutaway view

Woofer FA1239G

Model FPH12N FPH15N

Type 12” 2-way Passive Speaker 15” 2-way Passive Speaker
Frequency Response 60Hz~18kHz(±3dB) 55Hz~18kHz(±3dB)
50Hz~20kHz(-10dB) 45Hz~20kHz(-10dB)
Sensitivity(1W@1m) 97dB 99dB
Power Handling 400W (continuous), 1600W (peak) 400W (continuous), 1600W (peak)
Coverage (HxV) 90°x60° 90°x60°
Nominal Impedance 8Ω 8Ω
Crossover 1.9kHz 1.5kHz
LF 1X12”Woofer 1X15”Woofer
HF 1X 44mm HF Compression Driver (1”Exit) 1X 75mm HF Compression Driver (1.4”Exit)
Max. SPL 129dB 131dB
Input Connector/ Output Connector 2xSPEAKON 2xSPEAKON
Dimension (W x H x D) 390x630x360mm 450x710x370mm
Net Weight 16kg 20kg

P89
 FPH Series
Plastic Speaker

FPH10AN
FPH12AN
FPH15AN FEATURES:
>High efficiency“CLASS-D”amplifier, high power, low distortion,
excellent sound quality.
>Switching mode power supply for light weight, accommodate wide-
range voltage from 100V~240V.
>NdFeB Magnets tweeter, bass speaker, high sensitivity, high SPL,
light weight.
>Constant directivity horn for even coverage.
>Rugged and ultra-light gas-injected polypropylene enclosure
>EQ BOOST to optimize the frequency response, compressor limit
LED indication, over heat LED indication.
>Multi-angle cabinet design make FPH can be used for stage
monitor.
>Three handles make the carry more convenient.
>5xM10 suspension points for a quick and reliable installation. Can
be pole mounted on a 35mm stand.

Cutaway view

Woofer

FA1539G

Model FPH12AN FPH15AN

Type 12” 2-way Active Speaker 15” 2-way Active Speaker
Frequency Response 60Hz~18kHz(±3dB) 55Hz~18kHz(±3dB)
50Hz~20kHz(-10dB) 45Hz~20kHz(-10dB)
Input Sensitivity 0dBu 0dBu
Power Handling (RMS) 500W (LF) 500W (LF)
100W (HF) 100W (HF)
Coverage (HxV ) 90°x60° 90°x60°
Crossover 1.8kHz 1.5kHz
LF 1X12” Woofer 1X15” Woofer
HF 1X 44mm HF compression driver (1”Exit) 1X 75mm HF compression driver (1.4”Exit)
Max. SPL 125dB 127dB
Input Connector/ Output Connector Combo(XLR / JACK),XLR Combo(XLR / JACK),XLR
Dimension (W x H x D) 390x630x360mm 450x710x370mm
Net Weight 17kg 21kg
Rated Voltage AC 100-240V/50-60Hz AC 100-240V/50-60Hz

P90
FPH Series
Plastic Speaker

PS0115S-G
PS0115SA-G
INTRODUCTION:
PS0115SA-G, a subwoofer, can be used with FPH12A and FPH10A
(full range) together as a set. It consists of a 15” cone loudspeaker
and built-in power amplifier. Class H 600W, L/R signal input and
output. Signal link or main loudspeaker output can be selected
via a switch. Crossvoer can be 100Hz or 80Hz. The loudspeaker
cabinet adopts 20mm HDF in slot structure to ensure pure, rich and
transparent tone. 35mm mounting hole for convenient application.
PS0115S-G is same size’s passive version.

FEATURES:
> High effect “CLASS-H” PA, big power, small distortion and
excellent sound quality.
> Power switch design: light weight, stable performance, allow
wide power input of 110V~230V.
> L/R signal input and output. Signal link or main loudspeaker
output can be selected via a switch. Crossvoer can be 100Hz or
80Hz.
> Sub phase swicth with crossover o°or 180°.

APPLICATION:
Be applicable for conference, multi-function hall, music hall,
restaurant, and coffee house etc professional sound reinforcement
locations. Also it is fit for family salon and family concert.

Model PS0115SA-G Model PS0115S-G

Type Subwoofer Type Subwoofer
Frequency response 40Hz~100Hz(±3dB) Frequency response 40Hz~100Hz(±3dB)
35Hz~120Hz(-10dB) 35Hz~120Hz(-10dB)
Input Sensitivity 0dBu Sensitivity(1W@1m) 98dB(1m/1w)
Amp power rated 600W Power Handling 700W (continuous), 2800W (peak)
Crossover 100Hz / 80Hz Nominal Impedance 8Ω
LF 1X15”LF cone speaker /90mmvoice coil Crossover 100Hz / 80Hz
Max. SPL 129dB LF 1X15”LF cone speaker /90mmvoice coil
In/out connector 2XCOMBO JACK-XLR FEMALE / 4X XLR MALE Max. SPL 132dB
Dimension(WxHxD) 500x590x610mm In/out connector 2xSPEAKON
Net weight 46kg Dimension(WxHxD) 500x590x610mm
Rated Voltage AC 110V/230V,50-60Hz Net weight 37kg
Rated Voltage /

P91
 FPD Series
Plastic Speaker (Active&Passive)

INTRODUCTION: Features:
FPD series plastic speaker cabinet consists of passive series > Plastic enclosure, high strength but light weighted.
FPD10/FPD12/FPD15, and active series FPD10A/ FPD12A/ > High power and excellent tone tweeter and woofer.
FPD15A/FPD10AU/FPD12AU/FPD15AU/FPD10AD/ > Active models feature dual power amplifiers, crossover, low
FPD12AD/FPD15AD,which feature high performance and distortion, high performance, 3 band EQ, thermal/power surge/
low cost and can be used widely in various applications. short circuit/limit protection.
> Passive models feature LC crossover, PTC/overload protection
Applications: for reliable performance.
Suitable for applications in multifunction hall, conference > Trapezoidal enclosure for monitoring application.
room, concert hall, hotel, coffee bar, or touring show, family > Three handles and light weight for easy transportation.
salon, etc; 35mm socket for pole mounting; five M10 flying points for
suspension.

FPD10 FPD10A FPD10AU

FPD12 FPD12A FPD12AU
FPD15 FPD15A FPD15AU

P92
Passive
Model FPD10 FPD12 FPD15
Type 10" 2 way passive full range loudspeaker 12" 2 way passive full range loudspeaker 15" 2 way passive full range loudspeaker

Frequency response(-10dB) 60Hz--20KHz 50Hz--20KHz 45Hz--20KHz

Sensitivity (1m/1w) 94dB 96dB 97dB
Impedance 8Ω 8Ω 8Ω
Power handling 200W(Continuous),800W(Peak) 250W(Continuous),1000(Peak) 300W(Continuous),1200(Peak)
Crossover 2.5kHz 2.0kHz 2.0kHz
LF 10" woofer /50mm voice coil /200W 12" woofer/65mm voice coil /250W 15" woofer /65mm voice coil/300W
HF 34mm compression driver/1" throat/30W 34mm compression driver/1" throat/30W 34mm compression driver/1" throat/30W
Coverage(HxV) 90°x60° 90°x60° 90°x60°
Max SPL 123dB 126dB 127dB
Input connector 2×SPEAKON 2×SPEAKON 2×SPEAKON
Hanging system 2×M10 5×M10 5×M10
Dimension(WxHxD) 335×545×319 (mm) 390×630×360 (mm) 450×710×370 (mm)
Weight 13kg 17.2kg 20.4kg

Active
Model FPD10A FPD12A FPD15A
Type 10"two way active full range cabinet 12"two way active full range cabinet 15"two way active full range cabinet
Frequency response(-10dB) 60Hz--20KHz 50Hz--20KHz 45Hz--20KHz
Input Sensitivity (line) 0dBu 0dBu 0dBu
Input Sensitivity (mic) -40dBu -40dBu -40dBu
Max SPL(dB) 121dB 124dB 125dB
AMP power 200W (LF)+50W (HF) 250W (LF)+60W (HF) 250W (LF)+60W (HF)
LF 10"woofer/50mm voice coil/150W/8Ω 12"woofer/50mm voice coil/200W/8Ω 15"woofer/50mm voice coil/200W/8Ω
HF 34mm compression driver/1"throat/30W 34mm compression driver/1"throat/30W 34mm compression driver/1"throat/30W
Coverage(HxV) 90°x60° 90°x60° 90°x60°
Crossover 2.5 kHz 2.0 kHz 2.0 kHz
Input connector JACK/XLR JACK/XLR JACK/XLR
Input voltage 115V / 230V 115V / 230V 115V / 230V
Hanging system 2×M10 hanging points 5×M10 hanging points 5×M10 hanging points
Dimension(WxHxD) 335×545×319 (mm) 390×630×360 (mm) 450×710×370 (mm)
Weight 14kg 17kg 20.2kg

Active
Model FPD10AU FPD12AU FPD15AU
Type 10"two way active full range cabinet 12"two way active full range cabinet 15"two way active full range cabinet
Frequency response(-10dB) 60Hz--20KHz 50Hz--20KHz 45Hz--20KHz
Input Sensitivity (line) 0dBu 0dBu 0dBu
Input Sensitivity (mic) -40dBu -40dBu -40dBu
Max SPL(dB) 121dB 124dB 125dB
AMP power 200W (LF)+50W (HF) 250W (LF)+60W (HF) 250W (LF)+60W (HF)
LF 10"woofer/50mm voice coil/150W/8Ω 12"woofer/50mm voice coil/200W/8Ω 15"woofer/50mm voice coil/200W/8Ω
HF 34mm compression driver/1"throat/30W 34mm compression driver/1"throat/30W 34mm compression driver/1"throat/30W
Coverage(HxV) 90°x60° 90°x60° 90°x60°
Crossover 2.5 kHz 2.0 kHz 2.0 kHz
Input connector JACK/XLR JACK/XLR JACK/XLR
MP3, SD card/USB interface MP3, SD card/USB interface MP3, SD card/USB interface
Input voltage 115V / 230V 115V / 230V 115V / 230V
Hanging system 2×M10 hanging points 5×M10 hanging points 5×M10 hanging points
Dimension(WxHxD) 335×545×319 (mm) 390×630×360 (mm) 450×710×370 (mm)
Weight 14kg 17kg 20.2kg

P93
 FPD Series
Active Plastic Speaker (DSP)

This knob adjusts volume normally. Press it to enter into menu

FPD10AD to adjust function (4 tone modes/ 3 band EQ/low cut/delay, etc,
FPD12AD diaplayed on LCD). after function adjustment, user can select
FPD15AD
EXIT to escape out from menu or it escapes out automatically
after no operation.

Model FPD10AD FPD12AD FPD15AD

type 10” 2 way active full range speaker cabinet 12” 2 way active full range speaker cabinet 15” 2 way active full range speaker cabinet
frequency response(-10dB) 60Hz--20KHz 50Hz--20KHz 45Hz- 20KHz
input sensitivity LINE 0 dBu 0 dBu 0 dBu
MIC -40dBu -40dBu -40dBu
max SPL(dB) 126dB 128dB 129dB
amp power 350W (LF)+50W (HF) 350W (LF)+50W (HF) 350W (LF)+50W (HF)
LF unit 10 inch LF/50mm voice coil/200W/8Ω 12 inch LF/50mm voice coil/200W/8Ω 15 inch LF/50mm voice coil/200W/8Ω
HF unit 34mm compression driver/1inch throat/30W 34mm compression driver/1inch throat/30W 34mm compression driver/1 inch throat/30W
coverage(V*H) 90°x60° 90°x60° 90° x60°
crossover 2.4 kHz 2.4 kHz 2.4 kHz
input connection 2×JACK/XLR+JACK-3.5 2×JACK/XLR+JACK-3.5 2 x JACK/XLR+JACK-3.5
DSP 4 tone mode selection,3 band EQ, low cut, delay, 4 tone mode selection,3 band EQ, low cut, 4 tone mode selection,3 band EQ, low cut,
volume control delay, volume control delay, volume control
input voltage 100V-240V(universal) 100V-240V(universal) 100V-240V(universal )
suspension 2×M10 5×M10 5xM10
dimension(W*H*D) 335×545×319 (mm) 390×630×360 (mm) 450 x 710 x 370 (mm)
weight 14 kg 17Kg 20.2Kg

P94
KB Series
Active Plastic Speaker

INTRODUCTION:
“KB” plastic speaker is a portable and multi-purpose speaker. It adopts polypropylene engineering plastic cabinet of plastic injection
moulding, high strength, light weight; special handle bars, is convenient for transiting; features asymmetrical external design, can be used
as feedback speaker; HF & LF speaker of high performance , big power and sound quality; active part features high/low tone control,
electrical active crossover, can trim tone flexibly and appropriately; D-class bass PA with switch power adds on tweeter PA that adopted
integrated circuit, good performance, small distortion, soft & nature tone; features overheat, over current, short-circuit as well as autonomic
compression protection when signal overdrives etc protections of high stability and high security, which can guarantee speaker’s normal
working.

KB15
KB15A
KB15AU
KB15AW

KB10
KB12 KB10A
KB12A KB10AU
KB12AU KB10AW
KB12AW

FEATURES:
> Cabinet adopts high strength polypropylene engineering plastic of plastic injection moulding, good rigidity, light weight.
> HF & LF speaker of high performance, big power and sound quality;
> Special handle bars, is convenient for transiting; features asymmetrical external design, can be used as feedback speaker;
> Features high/low tone control, electrical active crossover, can trim tone flexibly and appropriately.
> D-class bass PA with switch power adds on tweeter PA that adopted integrated circuit, good performance, small distortion, soft & nature
tone;
> Features overheat, over current, short-circuit as well as autonomic compression protection when signal overdrives etc protections of high
stability and high security, which can guarantee speaker’s normal working.

APPLICATION:
Be applicable for conference room, multi-function hall, music hall etc medium & small size locations that require higher sound quality.

P95
 KB Series
Active Plastic Speaker

Instruction:
KB series active loudspeaker is equipped with WIFI function which delivers better tone than that of Bluetooth and infrared, and can connect
with cell phone or PC directly for convenient application. KB series is suitable for the reinforcement in multi-function hall, conference room,
theater, etc.

Features:
> High intensity but light weighted polypropylene enclosure
> High quality speaker offers high power and splendid tone
> Handle for convenient transportation; trapezoidal enclosure
for monitoring;
> High efficiency, low distortion, high cost performance ratio
> Built-in WIFI function
> HF/LF control, active crossover to fix the tone flexibly
> Switching mode power supply Class D power amplifier, low
distortion, natural tone
KB10AW/KB10AU > Thermal/power surge/short circuit protection, and
KB12AW/KB12AU automatic compression for over load signal to ensure reliable
KB15AW/KB15AU performance;
> 4*M10 flying points for suspension and ij35 hole for stand
installation

Applications:
suitable for the reinforcement in multi-function hall, conference
room, theater, etc.

Model KB10AW/KB10AU KB12AW/KB12AU KB15AW/KB15AU

Type 2-way Active Speaker 2-way Active Speaker 2-way Active Speaker
Frequency response 60Hz -20kHz (-10dB) 55Hz -20kHz (-10dB) 50Hz -20kHz
Input Sensitivity -10dBv(line) -10dBv(line) -10dBv(line)
Rated Power 200W(LF)/50W(HF) 250W(LF)/70W(HF) 250W(LF)/70W(HF)
Crossover 3000Hz 2800Hz 2200Hz
LF 10" ĭ50mm Voice Coil 12" ĭ63.5mm Voice Coil 15" ĭ65mm Voice Coil
HF ĭ34mm Voice Coil ĭ34mm Voice Coil ĭ34mm Voice Coil
Coverage (HxV) 90°×60° 90°×60° 90°×60°
Max SPL(@1m) 121dB 123dB 123dB
Dimension (WxHxD) 345×530×310 (mm) 410×630×330 (mm) 495×720×365 (mm)
Weight 16kg 17.2kg 25.5kg

P96
KB Series
Active Plastic Speaker

KB10A
KB12A
KB15A

KB10A/KB12A/KB15A
REAR PANEL

Cutaway view

Model KB10A KB12A KB15A

Type 2-way Active Speaker 2-way Active Speaker 2-way Active Speaker
Frequency Response 60Hz - 20kHz (-10dB) 55Hz - 20kHz(-10dB) 50Hz - 20kHz(-10dB)
Input Sensitivity -10dBv (line), -42dBu (mic) -10dBv (line), -42dBu (mic) -10dBv (line), -42dBu (mic)
Crossover 3kHz 2.8kHz 2.2kHz
LF 10 "bass / 50mm voice coil 12 "bass / 65mm voice coil 15 "bass / 65mm voice coil
HF AL film / 34mm voice coil AL film / 34mm voice coil AL film / 34mm voice coil
Coverage(HxV) 90 °x60 ° 90 °x60 ° 90 °x60 °
Max. SPL 121dB 123dB 123dB
Amp power 200W (LF) +50 W (HF) 250W (LF) +70 W (HF) 250W (LF) +70 W (HF)
Dimension(WxHxD) 345x530x310mm 410x630x330mm 495x720x365mm
Weight 16kg 17.2kg 25.5kg

P97
 KB Series
Passive Plastic Speaker

KB10
KB12
KB15

Cutaway view

Model KB10 KB12 KB15

Type 2-way Passive Speaker system 2-way Passive Speaker system 2-way Passive Speaker system
Frequency response 60Hz-20kHz(-10dB) 55Hz-20kHz(-10dB) 45Hz-20kHz(-10dB)
Sensitivity(1W@1m) 94dB 96dB 96dB
Nominal Impedance 8Ω 8Ω 8Ω
Power handling 200W (continuous), 800W (peak) 250W (continuous), 1000W (peak) 250W (continuous), 1000W (peak)
Crossover 2.5kHz 2.2kHz 2kHz
LF 10" LF /65mm voice coil (FB1043H) 12" LF /65mm voice coil (FB1243H) 15" LF /65mm voice coil(FB1543H)
HF Ti Diaphragm /34mm voice coil (FE34B) Ti Diaphragm /34mm voice coil (FE34B) Ti Diaphragm /34mm voice coil (FE34B)
Coverage(HxV) 90°x60° 90°x60° 90°x60°
Max SPL 121dB 123dB 123dB
Dimension(WxHxD) 345x530x310 (mm) 410x630x330 (mm) 495x720x365 (mm)
Weight 12.7kg 16.5kg 20.5kg

P98
FT Series
Coaxial Speaker

FT4 FT12 F10 F8 F6

FT4 Cutaway view

Model FT4
Type 4”Full range
Frequency response 150Hz-12kHz (-10dB)
Sensitivity(1W@1m) 90dB
Nominal Impedance 8Ω
Power handling 60W (continuous), 240W (peak)
Crossover /
Coverage (HxV) 60°X 60°
Max.SPL 114dB
Connection socket /
Dimension (WxHxD) 238x288x216.3(mm)
Weight 8kg

P99
 FT Series
Coaxial Speaker

FT10 FT6
FT12 FT8

Cutaway view

FT6 FT8

FT10 FT12

Model FT6 FT8 FT10 FT12

Type 2-way 6”Full range 2-way 8”Full range 2-way 10”Full range 2-way 12”Full range
Frequency response 120Hz-18kHz (-10dB) 100Hz-18kHz (-10dB) 75Hz~18kHz(-10dB) 60Hz~18kHz(-10dB)
Sensitivity(1W@1m) 90dB 92dB 94dB 96dB
Nominal Impedance 8Ω 8Ω 8Ω 8Ω
Power handling 100W (continuous), 400W (peak) 150W (continuous), 600W (peak) 200W (continuous), 800W (peak) 250W (continuous), 1000W (peak)
Crossover 3.5kHz 3kHz 2.5kHz 2.2kHz
Coverage (HxV) 60°X 60° 60°X 60° 60°X 60° 60°X 60°
Max.SPL 116dB 120dB 123dB 126dB
Connection socket 2XNL4MP 2XNL4MP 2XNL4MP 2XNL4MP
Dimension (WxHxD) 238x288x216.3(mm) 270×245×310(mm) 297×270×374(mm) 341×311×447(mm)
Weight 8.5kg 11.75kg 17.5kg 22kg

P100
MK Series
Studio Monitor Speaker Series

INTRODUCTION:
MK series is a newly developed monitor speaker with built-in class AB dual-
CHANNEL amp, two-in and two-out 24-bit DSP processor, with gain,
crossover, equalization, delay, compressor, scene memory and other functions
so that it can ensure the sound Dynamic requirements and great resolution.
Specific models include: full-range speakers: MK5/MK6/MK8,
ultra-low speaker: MK10SA.

KM5B
KM6B MK10SA KM8SA
KM8B

MK5 MK6 MK8

Model MK5 MK6 MK8 Model MK10SA

Frequency Response 65Hz-20kHz (±3dB) 50Hz-20kHz (±3dB) 45Hz-20kHz (±3dB) Frequency response 35Hz-250Hz(±3dB)
LF FH0501H-1 FH0601H-1 FH0801H-1 Impedance 4Ω
HF FE2502G FE2502G FE2502G Max. SPL 110dB
Amp power rated LF-50W LF-60W LF-90W Unit 10" LF
HF-25W HF-30W HF-45W Amp power rated 100W
Power Amp Distortion 0.05% @ 1kHz 0.05% @ 1kHz 0.05% @ 1kHz Music Power 200W
Input connector Combo XLR + RCA Combo XLR + RCA Combo XLR + RCA Power AMP Distortion(T.H.D) 0.05% @ 1KHz
Input Sensitivity 0dBV 0dBV 0dBV Connector 2*XLR IN + 2*XLR OUT
Impedance 10kΩ 10kΩ 10kΩ Input Sensitivity Line: +4dBU
Sensitivity 87dB /1m 88dB/1m 88dB /1m Nominal Impedance 10KΩ
Max. SPL 107dB(Pair) 109dB(Pair) 111dB(Pair) Power Supply 220V/50Hz
Crossover 2.2kHz 2.2kHz 1.9kHz Dimensions (WxHxD) 342x433x385mm
Power Supply 220V 50Hz 220V 50Hz 220V 50Hz
Dimensions (WxHxD) 208x321x217 mm 235x372x255mm 274x433x297mm
Weight 7.2kg 10kg 14.5 kg

P101
 PAP10D
Portable Combo Speaker System with
Built-in 8-channel Digital Mixer

Introduction
As a new type of portable multifunction combo speaker system, PAP10D includes 1pcs active speaker cabinet, 1pcs 10’’ active cabinet with
built-in removable 8-channel digital mixer. Combining special speaker stand, you can build a set of high performance professional speaker
system, which is very suitable for the application in salon, wine party, band performance, outdoor dance, conference room and other
venues.

FEATURES:
> 10’’ two-way combo speaker system features excellent tone
and light weight. The constant directivity horn-loaded tweeter AMPLIFIER
can be used as either FOH or stage monitor. Rated Power 2*250W (THD‹1%,4Ω load at 1kHz)

> Removable 8-channel digital mixer features easy use and THD ≤0.3%(1kHz)

excellent performance and adopts the 4th-generation 40bit Frequency Response 20Hz--20kHz
Voltage 100-240V/50-60Hz
SHARC floating point processor, 24bit/192kHz ADC/DAC, 8
built-in effects(reverb, delay, modulation and GEQ), 8 LINE IN(6
Pro Mic and 1 Stereo), 8 busses(1 Stereo output), 4 assignable
output and 2 USB interfaces(for recording, playback, scene REAR
storage and wireless access). SPEAKER
> High efficiency 2-channel “CLASS-D” amplifier(250W) Type 10" two way active speaker cabinet system
features large power, low distortion and excellent tone. Frequency response 70Hz~20kHz(±3dB) 60Hz~20kHz(-10dB)

> Designed with switching power supply featuring light weight, Sensitivity(1m/1W) 94dB

stable performance and 100-240V wide voltage input. Max SPL(@1m) 122dB
Speaker cabinet
> Digital mixer offers USB2.0 dock for WIFI remote control by
Nominal Impedance 4Ω
iPad or Android device
Power 200Wx2
> Digital network interface supports PC connection for visual
LF speaker cabinet 1X10" woofer/50mm voice coil/200W
operation.
HF driver 1X 34mm HF dr iver/34mm voice coil /30W
> 8 effect modules include 2 reverb, 2 modulation, 2 delay and Coverage(H*V) 90° x 60°
2 31-band GEQ to adjust tone flexibly and properly. Crossover 2.5kHz
> Support USB recording/playback(wav). Connector JACK
> Designed with high quality NEUTRIK components and 6 x Speaker cabinet dimension (W*H*D) 348x557x330(mm)
Combo XLR. Speaker system net weight 32kg

> Mixer features easy installation and co-use with special

stand.

P102
8-channel Digital Mixers support wireless control via iPad or Android
Tablet and wired access to a PC, and will
support iPhone and Android Phone in October,
2018 as expected.

1. MIC IN 8. Function Selection and

2. MIC Gain LED
3. STEREO IN 9. Universal Knob
4. Output 10. PHONES
5. Network 11. Standby
6. MAINS IN 12. USB2.0
7. Channel Selection and LED 13. Headphone Level Knob

Features
> PC/iPad/smartphone remote control
> Multiple control via wireless network and Ethernet, compatible with iOS, Android,
Windows, Mac OS and Linux device
> Input channel supports phantom power, 4 band PEQ, high pass filter, compressor,
effect and noise gate
> Output channel supports reverb, delay and 8 built-in effects
> 2 x USB(stereo recording/playback/system updates/scene storage)
> Input: 6 Mic, 1 Stereo, 2 USB wireless Mic
> 8 Busses: 1 Stereo output
> 4 assignable output
> High quality components: NEUTRIK
> 8 built-in effects
> Support scene memory

8-channel Digital Mixer

CHANNEL DESCRIPTION
MIC IN 6 6 Combo XLR
LINE IN 1 Stereo 2 Jack
Master Out L/R
Mono Busses 4 4 assignable output
Stereo Busses 1
USB Interface USB recording/playback(wav)
AD/DA Maximum 24Bit/192KHz
Effect 8 effect modules: 2 reverb, 2 modulation, 2 delay and 2 31-band GEQ
Network Wifi External Module
Power Supply AC 90-240V 50/60Hz

P103
 PAP12D/PAP15D
Portable Combo Speaker System with
Built-in 8-channel Digital Mixer

PAP15 PAP12
PAP18SA

Introduction
This portable multifunction speaker combo includes two sets of speaker system - 12inch(digital mixer + passive speaker) and
15inch(professional power amplifier + passive speaker). Combining special speaker stand, you can build a set of high performance
professional speaker system featuring perfect tone, light weight, easy operation and excellent performance.

Active Speaker System

1. High efficiency “Class-D” amplifier, large power, low distortion, excellent tone;
2. Dual channel design, perfect stereo effect, 100-240V wide voltage input;
3. Power: 2 x 250W/4Ω;
4. XLR input, 12V/4A power supply and external passive speaker interface.

Passive Speaker System

1. Cabinet made of high intensity plastic materials;
2. Subwoofer and tweeter designed with ferrite magnetic circuit, high sensitivity, low distortion, large power, high efficiency;
3. 3pcs handle for easy carry, light weight, elegant and attractive contour;
4. 45°trapezoid appearance design, can be used as stage monitor;
5. Support either pole mounting(35mm hole) or suspension(5pcs M10 suspension points) for installation.

Applications
Very suitable for salon, wine party, band performance, outdoor dance, conference room and other venues.

P104
16-channel Digital Mixer

support wireless control via iPad or

Android Tablet and wired access to
a PC, and will support iPhone and
Android Phone in October, 2018 as
expected.

1. MIC IN
2. MIC Gain
3. STEREO IN
4. Output
5. Network
6. MAINS IN
7. Channel Selection and LED

Features
> Speaker Cabinet with Built-in Mixer
> PC/iPad/smartphone remote control;
> Multiple control via wireless network and Ethernet, compatible with iOS, Android, Windows,
Mac OS and Linux device;
> Input channel supports pre-amp electro-gain, phantom power, 4 band PEQ, high pass filter,
compressor, effect and noise gate;
> Output channel supports reverb, delay and 8 built-in effects;
> 2 x USB(stereo recording/playback/system updates/scene storage);
> Input: 12 Mic, 2 Stereo;
> 6 Busses: 4 AUX, 1Mix(L/R)
> 6 assignable XLR output;
> High quality components: NEUTRIK;
> 4 built-in effects;
> Support scene memory.

MIC IN 12 8 XLR, 4 Combo XLR

stereo in 2 4 Jack
Master Out L/R 6 assignable XLR output
AUX 4
USB Interface USB recording/playback(wav)
AD/DA Maximum 24Bit/192KHz
Effect 4 effect modules: 2 reverb, 2 delay
Network Wifi external module
Power Supply External 12V DC(AC 90-240V 50/60Hz)power adapter

P105
 Portable Combo Speaker System with
Built-in 16-channel Digital Mixer

PAP12 PAP15
Model PAP12 PAP15
Type 12"two-way active full range speaker 15"two-way active full range speaker
Frequency Response 50Hz--20kHz 45Hz--20kHz
Sensitivity(1W@1m) 96dB 97dB
Impedance(Ω) 4Ω 4Ω
Rated Power(RMS) 200W 200W
Maximum SPL(dB) 126dB 127dB
LF Unit 12"subwoofer/50mm voice coil/200W/4Ω 15"subwoofer/50mm voice coil/200W/4Ω
HF Unit ĭ34 compression driver/1"throat/30W ĭ34 compression driver/1"throat/30W
Coverage(V*H) 90°x60° 90°x60°
Crossover 2.2 kHz 2.4 kHz
Suspension 5×M10 5×M10
Dimension(W*H*D) 390×630×360 (mm) 450×710×370 (mm)

18”active subwoofer
INTRODUCTION:
PAP18SA, a subwoofer, can be used with PAP12 andPAP15 (full range) together
as a set. It consists of a 18” cone loudspeaker and built-in power amplifier.
Class H 750W, L/R signal input and output. Signal link or main loudspeaker
output can be selected via a switch. Crossvoer can be 100Hz or 80Hz. The
loudspeaker cabinet adopts 20mm HDF in slot structure to ensure pure, rich
and transparent tone. 35mm mounting hole for convenient application.

Type 18” Subwoofer

Frequency response(-10dB) 35Hz~100Hz
Max SPL 128dB
Crossover 80Hz/100Hz
LF 18”/100mm Voice Coil
Input connector JACK / XLR
Input sensitivity 0dBu
Power 750W
Dimension(WxHxD) 568x627x710(mm)
PAP18SA
Weight 58.5kg

P106
 Active Speaker :
1. High efficiency “Class-D” amplifier, large power, low distortion, excellent
tone;
2. Dual channel design, perfect stereo effect, 100-240V wide voltage input;
3. Power: 2 x 250W/4ȍ;
4. XLR input, 12V/4A power supply and external passive speaker interface.

PAP12 REAR

P107
 PSM Series
Stereo Monitor Speaker System

PSM05E

PSM05R(Bluetooth/USB/REC) PSM05S PSM05e (Active)

PSM05 (Passive)

Introduction:
PSM05R/PSM05S Monitor Speaker features compact design, MIC
stand integration system for use with stand and boom, 2x120W
MP3 Player
Class-D amplifier and high quality speaker unit. MIC1/LINE is designed
Bluetooth
with INSTRUMENT switch function and effects. Internal MP3/USB/ USB Player
BLUETOOTH, USB recording/ folder read function(PSM05R only) Recorder
Applications:
Suitable for band show or solo performance.

FEATURES: echo effect

> Internal 2x150W Class-D amplifier and high quality speaker unit
> 2CH MIC/LINE, 1CH AUX IN, 3-band EQ (PSM05R is 2-band EQ)
> MIC input has effects for option.
> MIC1/LINE input with internal INSTRUMENT function for signal
optimization.
> 48V phantom power for use with condenser MIC.
> MAIN IN and THRU function for option.
> Wide power supply 100V-240V.

Model PSM05R PSM05S PSM05E

Type 5” plastic monitor speaker 5” plastic monitor speaker 5” plastic monitor speaker
Frequency response 60Hz –18kHz (-10dB) 60Hz –18kHz (-10dB) 60Hz –18kHz (-10dB)
90Hz –13kHz (-3dB) 90Hz –13kHz (-3dB) 90Hz –13kHz (-3dB)
Power 60W(8Ω),120W(4Ω) 60W(8Ω),120W(4Ω) 60W(8Ω),120W(4Ω)
Max SPL(1m) 115dB 115dB 115dB
Audio inputs
3.5mm mini jacks -10dBu to +4dBu -10dBu to +4dBu /
RCA jacks -10dBu to +4dBu -10dBu to +4dBu /
XLR/TRS combo jacks -40dBu to +4dBu -40dBu to +4dBu 0dBu
Phantom power +48V,switchable +48V,switchable /
powersupply 100V-240V,50/60Hz 100V-240V,50/60Hz 100V-240V,50/60Hz
Equalizer
high >12KHz ±15dB >12KHz ±15dB /
mid 2.5kHz±15dB / /
low 100Hz±15dB 100Hz±15dB /
USB/BLUETOOTH/REC Yes No No
Dimension(W*H*D) 290*215*175(mm) 290*215*175(mm) 290*215*175(mm)
weight 2.8kg 2.8kg 2kg

P108
 PSM-R system
Bluetooth/USB/REC
PSM-R combination system includes
PSM05R monit or speaker a nd
PSM05 passive speaker, output
power 2x120W/4Ω,BLUETOOTH/
USB/MP3 play function.

PSM05R(Active) PSM05 (Passive)

PSM05R(Rear) PSM05 (Rear)

PSM-S system
PSM-S combination system includes
PSM05S monitor speaker and
PSM05 passive speaker, output
power 2x120W/4Ω, suitable for solo
performance and stage monitor.

PSM05S(Active) PSM05 (Passive)

PSM05S(Rear) PSM05 (Rear)

PSM-E system
PSM-E combination system includes
PSM05E monitor speaker and
PSM05 passive speaker, output
power 2x120W/4Ω, suitable for
stage monitor and use with other
pre-amp..

PSM05E(Active) PSM05 (Passive)

PSM05E(Rear) PSM05 (Rear)

P109
 PSM Series
Ultra-Compact 150-watt
PA/Monitor Speaker System

Introduction:
Multi-purpose, 150-Watt, active speaker for vocal and
keyboard monitoring, multi-media, press conferences and
home recording studio, etc.

FEATURES:
>Revolutionary Class-D amplifier technology;
>Ultra-low noise 3-channel mixer with 3-band EQ;
>Mic stand integration system for use with stand and boom;
>Internal switch-mode power supply for noise-free audio,
superior
>transient response and very low power consumption;
>Add the echo effect for optimizing the Mic input;
>Bluetooth for option;
>USB recording/Playing function;(only PSMO5R)
>USB record and select the files to play.(only PSMO5R)

PSM05A

Model PSM05A
Type 5” plastic monitor speaker
Frequency response 60Hz –18kHz (-10dB)
90Hz –13kHz (-3dB)
Power 150W
Max SPL(1m) 115dB
Audio inputs
3.5mm mini jacks -10dBu to +4dBu
RCA jacks -10dBu to +4dBu
XLR/TRS combo jacks -40dBu to +4dBu
Phantom power +48V,switchable
powersupply 100V-240V,50/60Hz
Equalizer
high >12KHz ±15dB
mid 2.5kHz±15dB
low 100Hz±15dB
USB/BLUETOOTH/REC /
Dimension(W*H*D) 290*210*175
weight 2.8kg

P110
KG Series
Recording Mixing Consoles

Introduction:
New to the range for 2016 are our KG range of compact, high quality 16 programme DSP effects unit.
and portable mixing consoles. Offering all the features and In addition to this, the KG models feature +48V phantom power
specifications required from mixing consoles at this level, at on all mic channels, high quality 60mm smooth faders, and a
a great price point. With features such as 3 band EQ, built-in robust quiet internal switchmode power supply.
channel compression, DSP effects and a hugely versatile MP3/
USB/SD card playback and recording system. Features:
Available in 5, 6, 8, 10 or 12 input models. The 5 input with 1 >1-8 channel input models
mic channel, the 6 input with 2 mic channels, the 8 has 4 mic >3 Band EQ on all mic channels
channels, the 10 with 6 mic channels, and the 12 input model >High pass filters and adjustable compressors on all mic
has 8. All feature 2 stereo input channels. channels
Input channels, are fully featured with 3 band EQ, 2 Auxiliaries, >USB/SD card recording / playback
balanced mic/line connectors, compressor control and a useful >Bluetooth playback facility
channel MUTE switch. Stereo channels differ only with 2 band EQ >High quality DSP effects
and no compressor. >Ultra compact and lightweight design
Main outputs are balanced XLR, with additional jack outputs
available for auxiliaries and control room, and RCA phono record/
playback facilities.
The USB/SD card facility for stereo recording / playback make
SD
the ideal for project home recording or giving the ability to supply
usb
interval / backing music to your live performance. To add further
practicality to the unit, there is a built in MP3 player to give you
every opportunity to make your live performance as quick and
easy to set-up as possible.Also included on both KG models is a mode play stop loop backword forword

P111
 Model KG05 KG06 KG08 KG10 KG12
Inputs 5 6 8 10 12
Mic Input channels 1 2 4 6 8
Stereo Input channels 2 2 2 2 2
Gain MIN - MAX MIN - MAX MIN - MAX MIN - MAX MIN - MAX
Mic +6dB - +50dB +6dB - +50dB +6dB - +50dB +6dB - +50dB +6dB - +50dB
Line +10dB - -34dB +10dB - -34dB +10dB - -34dB +10dB - -34dB +10dB - -34dB
EIN -100dB -100dB -100dB -100dB -100dB
Frequency response
Mic Channel 10Hz - 20kHz +1/-3 10Hz - 20kHz +1/-3 10Hz - 20kHz +1/-3 10Hz - 20kHz +1/-3 10Hz - 20kHz +1/-3
THD Mic Channel ≤0.03% ≤0.03% ≤0.03% ≤0.03% ≤0.03%
Signal to noise ratio 80dB 80dB 80dB 80dB 80dB
Output Levels MAX +27(BAL) MAX +27(BAL) MAX +27(BAL) MAX +27(BAL) MAX +27(BAL)
MAX +22(UNBAL) MAX +22(UNBAL) MAX +22(UNBAL) MAX +22(UNBAL) MAX +22(UNBAL)
Channel EQ
Hi 12kHz 12kHz 12kHz 12kHz 12kHz
Mid 2.5kHz 2.5kHz 2.5kHz 2.5kHz 2.5kHz
Lo 45Hz 45Hz 45Hz 45Hz 45Hz
Lo Cut / 80Hz 80Hz 80Hz 80Hz
MP3/USB/SD Audio YES YES YES YES YES
playback
USB/SD Audio recording YES YES YES YES YES
DSP Effects NO YES YES YES YES
CEHO Effects YES NO NO NO NO
Power requirements 100V - 240V 100V - 240V 100V - 240V 100V - 240V 100V - 240V ~
Dimensions (W x H x D) 195x80x270(mm) 227x70x359(mm) 283x70x359(mm) 339x70x359(mm) 395x70x359(mm)

P112
 Model KG16
Inputs 16
> KG series portable compact mixeroffers all the features and specifications Mic Input channels 12
required from mixing consoles at this level,but at a much greater price point. It Stereo Input channels 2
features 3-band EQ, built-in channel compression, DSP effects and versatile MP3/ Gain MIN - MAX
USB/SD card playback and recording system. Mic +6dB - +50dB
> Available in 5, 6, 8, 10, 12 and 16channel models. 5-channel mixerhas 1 Line +10dB - -34dB
mic input; 6-channel onehas 2 mic inputs; 8-channel one has 4 mic inputs; EIN -100dB
10-channel onehas 6 mic inputs; 12-channel one has 8 mic inputs. All mixershave Frequency response
2 stereo inputs. Mic Channel 10Hz - 20kHz +1/-
> Input channel features 3-band EQ, 2 aux inputs, balanced mic/line input, THD Mic Channel 3
compressor control and a useful channel mute switch. Stereo channel differs with Signal to noise ratio ≤0.03%
only 2-band EQ and without compressor. Output Levels 80dB
> Main outputis balanced XLR, additional jack output available for auxiliaries, MAX +27(BAL)
control room and RCA recording/playback facilities. MAX +22(UNBAL)
> USB/SD card stereo recording/playback makesKG series ideal for home Channel EQ
recording or providing insulation/background music for your live performance. Hi 12kHz
To add further practicality to the unit, there is a built-in MP3 player available to Mid 2.5kHz
facilitate your live performance. Lo 45Hz
> In addition, KG series features 16 kinds of high quality DSP effect units, Lo Cut 80Hz
phantom power supply for mic channel, high quality 60mm smooth faders and MP3/USB/SD Audio YES
switching mode power supply. playback YES
> KG16 has added the new functions below: USB/SD Audio recording YES
1). Each channel adds monitor switch and LED, the DJ can manually detect the DSP Effects NO
sound effect of each channel. CEHO Effects 100V - 240V ~
2). DSP foot switch function. Power requirements 395x70x359(mm)
3). AUX2 function. Dimensions (W x H x D)

P113
 MIX-C Series
Mixing Console

MIX16C

The MIX-C compact mixing

ixing console range offer a versatile and cost effective many different applications
applications.
solution. Features
Professional features such as 3-band swept EQ, 4 auxiliaries, high > 3 band with swept mid EQ on mic channels
quality onboard DSP, 4 subgroups and USB connections. A 9-band > 4 band EQ on stereo channels
graphic EQ on the output and balanced XLR output connections make > 9 band graphic equaliser
these comprehensive and feature packed mixing consoles suitable for > Rackmountable model MIX08CG

MODEL MIX08CG MIX08C MIX12C MIX16C MIX20C

Mic Input 6 6 10 14 18
Stereo Input 4 4 4 4 4
Aux 4 4 4 4 4
Dsp 100 programs 100 programs 100 programs 100 programs 100 programs
MONO 1 1 1 1 1
Stereo L/R Output 2 2 2 2 2
Group L/R Output 4 4 4 4 4
Gain 70dB(MIC main output)
MIC CH. EQ±15dB HI: 12kHz, MID:800-8kHz(optional), LO:80Hz
LINE CH. EQ±15dB HI: 12kHz, HI MID:3kHz, LO MID:500Hz, LO:80Hz
Frequency response (20-20kHz)±1dB
Equivalent input noise -127(unweighted)
Maximum Output Level +28dBu
Meter 12segment(-30dB to 18dB)
Distortion ≤0.01%(20-20KHz)
Lamp /
Weight (kg) 5.5kg 5.3kg 7.2kg 8.8kg 10kg
Dimension(WxDxH)mm 482x445x105 430x445x105 535x445x105 645x445x105 732x445x105

*Only use a momentary type footswitch

P114
MIX-CA Series
Powered Mixers

MIX16CA

The MIX-CA compact mixing console range offer a versatile and cost Features
effective solution. > 3 band with swept mid EQ on mic channels
Professional features such as 3-band swept EQ, 4 auxiliaries, > 4 band EQ on stereo channels
high quality onboard DSP, 4 subgroups and USB connections. > 9 band graphic equaliser
A 9-band graphic EQ on the output and balanced XLR output > Rackmountable model MIX08CGA
connections make these comprehensive and feature packed > 2 X 300W class D amplifier MIX08CGA MIX08CA MIX12CA
mixing consoles suitable for many different applications. MIX16CA

MIX08CGA MIX08CA MIX12CA MIX16CA

Mic Input 6 6 10 14

Stereo AUX Input 4 4 4 4

Aux 4 4 4 4

DSP 100 programs 100 programs 100 programs 100 programs

MONO / / / /

Stereo L/R Output 2 2 2 2

Group L/R Output 4 4 4 4

Gain 70dB(MIC main output)

MIC CH. EQ±15dB HI: 12kHz, MID:800-8KHz(optional), LO:80Hz
LINE CH. EQ±15dB HI: 12kHz, HI MID:3kHz, LO MID:500Hz, LO:80Hz
Frequency response (20-20KHz)±1dB
Equivalent input noise -127(unweighted)
Maximum Output Level +28dBu
Meter 12segment(-30dB to 18dB)
Distortion ≤0.01%(20-20kHz)
Lamp /
Weight(kg) 8.7kg 8.5kg 10.5kg 12kg
Dimension(WxDxH)mm 482x445x150 430x445x150 535x445x150 645x445x150

*Only use a momentary type footswitch

P115
 MIX Series
Mixing Console

MIX04AU

MIX02A

MIX02-1A

USB

MIX02-1A REAR PANEL MIX02A MIX04A

MIX02AU REAR PANEL MIX04AU REAR PANEL

Features:
> 2/4 Mic/line input, 48V phantom power, used for condenser microphone. > 4band LED level indicator
> 2way stereo line input > Compact external structure;be applicable for different
> 2 band EQ, +/-15dB EQ at 80Hz &12kHz locations;
> Main output control (L/R) > Operation is friendly and easy;
> Headphone output control > External power supply, (100-265V) can be used for any
> RCA input/output > countries.

Model MIX02-1A MIX02A MIX02AU MIX04A MIX04AU

Mic Input 2 2 2 4 4
Stereo Input 1 2 2 2 2
Aux / 1 1 1 1
Dsp / / / / /
MONO / / / / /
Stereo L/R Output 1 2 2 2 2
Group L/R Output / / / / /
Gain 65dB(MIC main output)
MIC CH. EQ±15dB HI: 12kHz, LO:80Hz
LINE CH. EQ±15dB HI: 12kHz, LO:80Hz
Frequency response (20-20kHz)±1dB
Equivalent input noise -103(unweighted)
Maximum Output Level +20dBu
Meter 4segment(-20dB to CLIP)
Distortion ≤0.08%(20-20kHz)
Lamp / / / / /
Weight (kg) 0.54kg 0.78kg 0.78kg 0.98kg 0.98kg
Dimension(W*D*H)mm 190x140x68 220x160x68 220x160x68 220x220x68 220x220x68

P116
AE414
Microphone & Power Amplifier Combined Equipment

AE414

Power amplifier part: Wireless Part:

AE414 features high efficiency class D power amplifier, 4 Wireless section includes 4 UHF receiving units and 4
UHF transmitters which feature high S/N ratio, high anti-
Ohms speaker cabinet with reliable performance, 2x500W
interference, wide dynamic, stable frequency.
output power, high efficiency, low distortion, high S/N ratio, There are 3 types of transmitters: handheld, bodypack and
wide dynamic, perfect protections (thermal/short circuit/DC desktop for different applications. The handheld type can
be used in live show or Karaoke. The bodypack type can
protections).
be packed in the waist and picks-up at the collar, and the
actor’s hands are free to handle other things in the show. The
desktop type can be used in the small conference.
This equipment is designed with 4 receiving units and 4
Model AE414 wireless microphones for application.
Frequency range 790~870 MHz
Frequency stability ±0.005%
Frequency response 50~18 kHz
Receiving sentivity > -95 dBm
Distortion < 0.8% at -90dBm
Transmission power 10mW
Input 4 CH MIC,4 CH LINE,1 group of RCA,1 MP3,USB and SD card interface
Configurations for selection:
Frequency response 20~20 kHz
EQ HF ±15dB±2dB (10kHz)
MF ±12dB±2dB (2kHz)
LF ±15dB±2dB (50Hz)
Sensitivity MIC -45dBu±2dB
LINE -13.5dBu±2dB
RCA -6.5dBu±2dB
Mode Class D
Rated power 2*500W 4 ohms stereo
Protection short circuit/over load protection
Cooling fan A B C
S/N ratio > 70dB

P117
 AE Series
Cabinet Powered Mixers

Model AE42BEM
Mic Input 4
LINE Input 4
Aux 1
Dsp 1(reverb)
MONITOR /
AE42BEM Stereo L/R Output /
Power amp output(THD≤1%,RMS) 2x50W(4ohm)class AB
AE42BEM Introduction: Gain 45dB(MIC main output)
This product is the new version of AE42BE. DSP/MP3 player/ MIC CH. EQ±15dB HI: 10kHz, LO:100Hz
USB/SD card/remote control have been added to the product. Frequency response (20-20kHz)±3dB
Class AB 50Wx2 amplifier makes sound clear and full. Two passive S/N Ratio 70dB
loudspeakers can be linked to the mixer for perfect stereo effect. Maximum Output Level 27dB
AE42BEM features compact enclosure and comprehensive function. Meter /
The product is the combination of mixer,player and reinforcement Distortion ≤0.5%(20-20kHz)
system. Wireless /
Features: Weight (kg) 9.2kg
> compact but unique shape. Dimension(W×D×H)mm 480×160×130
> comprehensive function(mixer, power amplifier, MP3,SD card.
> multiple input connectors to connect the audio source.
> light weighted.
> solid structure.

Configuration
guration of combined equipment and speaker
speake cabinet:

AE42-A AE42-B
Configuration: Configuration:
AE42BEM 1pcs, KB12 2 pcs, handheld wireless microphone AE42BEM 1pcs, KJ12-1 2pcs, handheld wireless microphone
2pcs, bodypack wireless microphone 2pcs. 2pcs, bodypack wireless microphone 2pcs;

Configurations for selection: Configurations for selection:

A B C A B C

P118
DG Series
Digital Amplifier with DSP

As the brand new flagship product, DG series digital power amplifiers adopt multi-loop regulating technique featuring high standard technical
specifications. The specially-designed amplification technology can realize 95% efficiency and excellent stability even under low impedance
and large current conditions; featuring active PFC and soft switching technology, with the optimized amplification design, the switching
power supply can fit into harsh power grid environment and provides continuous power.
DG series digital power amplifiers are equipped with high-quality DSP, high precision and dynamic AD/DA converter and 3.3” HD LCD
screen; it can enforce real time monitoring via RS-485 and LCD panel and support receiving analog and AES digital audio signal.

Model DG2300 DG4200 DG4150 DG2200 DG2150 DG4100 DG2100 DG4065 DG2065
8Ω/Stereo 2×3000W 4×2000W 4×1500W 2×2000W 2×1500W 4×1000W 2×1000W 4×650W 2×650W
4Ω/Stereo 2×5100W 4×3400W 4×2550W 2×3400W 2×2550W 4×1700W 2×1700W 4×1100W 2×1100W
Rated *2Ω/Stereo 2×7140W 4×4760W 4×4335W 2×4760W 2×4335W 4×2890W 2×2890W 4×1870W 2×1870W
Power 16Ω/Bridge 1×6000W 2×4000W 2×3000W 1×4000W 1×3000W 2×2000W 1×2000W 2×1300W 1×1300W
8Ω/Bridge 1×10200W 2×6800W 2×5100W 1×6800W 1×5100W 2×3400W 1×3400W 2×2200W 1×2200W
*4Ω/Bridge 1×14280W 2×11560W 2×8670W 1×11560W 1×8670W 2×5780W 1×5780W 2×3740W 1×3740W
RMS Voltage 154.9V 126.5V 109.5V 126.5V 109.5V 89.4 V 89.4 V 72.1V 72.1V
(THD=1%,1kHz)
Rise Slope(1kHz, 50V/us
bypass low pass filter)IMD-

SMPTE(10% rated 0.01%

output, typical value)

DIM30(10% rated 0.01%

output, typical value)

Crosstalk(under rated ≥90 dB

power, 20 Hz ~1 kHz)

Frequency Response(10%

rated output, 8Ω, 20Hz~20 ±0.3dB

kHz)

Input Impedance 20kΩ(bal) , 10kΩ (unbal)

Damping
≥5000
(8Ω, 20Hz~200Hz)

S/N Ratio(A-weighted,
≥115dB ≥112dB ≥110dB ≥112dB ≥110dB ≥109dB ≥109dB ≥107dB ≥107dB
20Hz~20kHz)

Power Supply 90~260VAC,50~60 Hz

Protection Function Undervoltage, amplifier direct current, over heat, temperature control, overload control
Dimension

(W×H×D) 483×44×465mm 483×44×370mm

N.W 13kg 9kg

*Test condition: 20ms, 1KHz, THD+N=1%

P119
 AQ Series
Digital Power Amplifier

AQ2350

AQ4150

Introduction: Function
AQ series digital power amplifier is suitable for demanding > stereo/mono/bridge operation modes;
conference system, entertainment or small touring show. > sensitivity 1Vrms, gain 32dB, 26dB for
This series digital power amplifier features perfect protection, option
reliable performance, PFC and harmonic soft start switching > XLR input connector;
mode power supply technology, 90~260VAC universal voltage. > professional speaker connector;
> output over load/short circuit protection;
> DC output protection;
Features: > 70˫ power compression;
> high efficiency, energy saving; > thermal protection;
> active PFC, power factor 0.99 > Thermal indication;
> high output to drive 2 Ohm load stably;
> compact but solid structure;
> perfect protection;
> meet the requirement of production compliance and electromagnet compatibility.
> Variable speed fan for cooling;

P120
MODEL AQ2150 AQ2250 AQ2350 AQ2450
8Ω/ stereo 2×150W 2×250W 2×350W 2×450W
4Ω/ stereo 2×255W 2×425W 2×595W 2×765W
Rated power(EIAJ
*2Ω/ stereo 2×435W 2×725W 2×1015W 2×1300W
THD=1%,1kHz,2 CH
16Ω/ bridged 1×300W 1×500W 1×700W 1×900W
working simultaneously)
8Ω/ bridged 1×510W 1×850W 1×1190W 1×1530W
*4Ω/ bridged 1×870W 1×1450W 1×2030W 1×2600W
RMS output voltage(THD=1%,1kHz) 34.6V 44.7V 52.9V 60.0V
Slew rate( 1kHz, low-pass filter bypassed) 50V/us
Sensitivity(Rated Power,1kHz) selectable 35dB, 32dB, 29dB, 26dB
THD+N (10% rated output power) 0.02% 0.02% 0.02% 0.02%
IMD-SMPTE(10% rated output power) 0.02% 0.02% 0.02% 0.02%
DIM30(10% rated output power) 0.02% 0.02% 0.02% 0.02%
Crosstalk rejection(less than rated power,
≥90 dB
20 Hz -1 kHz)
Frequency response(10% rated output power,
±0.2dB
8Ω,20Hz - 20 kHz)
Input impedance 20kΩ(bal) ,10kΩ(unbal)
Damping factor(8Ω,20 Hz -100 Hz) ≥300
S/N ratio (A weighted,20Hz-20kHz) ≥105dB ≥104dB ≥103dB ≥100dB
Power supply 90~260VAC, 50~60 Hz
protection Protection:Under voltage, DC, Over temperature; Limiter: Over temperature,Over load,
dimension(W×H×D) Short 483×44×370mm
Net weight 9kg

*Test condition: 20ms, 1KHz, THD+N=1%

MODEL AQ4150 AQ4250 AQ4350 AQ4450

8Ω/ stereo 4×150W 4×250W 4×350W 4×450W
4Ω/ stereo 4×255W 4×425W 4×595W 4×765W
Rated power(EIAJ
*2Ω/ stereo 4×435W 4×725W 4×1015W 4×1300W
THD=1%,1kHz,2 CH
16Ω/ bridged 2×300W 2×500W 2×700W 2×900W
working simultaneously)
8Ω/ bridged 2×510W 2×850W 2×1190W 2×1530W
*4Ω/ bridged 2×870W 2×1450W 2×2030W 2×2600W
RMS output voltage(THD=1%,1kHz) 34.6V 44.7V 52.9V 60.0V
Slew rate( 1kHz, low-pass filter bypassed) 50V/us
Sensitivity(Rated Power,1kHz) selectable 35dB, 32dB, 29dB, 26dB
THD+N (10% rated output power) 0.02% 0.02% 0.02% 0.02%
IMD-SMPTE(10% rated output power) 0.02% 0.02% 0.02% 0.02%
DIM30(10% rated output power) 0.02% 0.02% 0.02% 0.02%
Crosstalk rejection,less than rated power,
≥90 dB
20 Hz -1 kHz)
Frequency response(10% rated output power,
±0.2dB
8Ω,20Hz - 20 kHz)
Input impedance 20kΩ(bal) ,10kΩ(unbal)
Damping factor(8Ω,20 Hz -100 Hz) ≥300
S/N ratio (A weighted,20Hz-20kHz) ≥105dB ≥104dB ≥103dB ≥100dB
Power supply 90~260VAC, 50~60 Hz
protection Protection:Under voltage, DC, Over temperature; Limiter: Over temperature,Over load,
dimension(W×H×D) Short 483×44×370mm
Net weight 9kg

*Test condition: 20ms, 1KHz, THD+N=1%

P121
 AG Series
Digital Power Amplifier

Introduction:
AG series digital power amplifier is our new flagship product which features multiple adjustment technology, over 95% efficiency and stable
function in the low impedance and high current situation, active PFC and soft switching of the switching mode power supply, 90~260VAC
universal power supply.
AG series has 2 channel and 4 channel products. The high efficiency and reliable performance and the capacity to drive 2Ω load are suitable
for line array system.

AG4150/AG2150

Features: Function:
>high efficiency, energy saving; >stereo/parallel/bridge modes;
>compact but solid structure; >gain option: 41dB 38dB 35dB 32dB
>meet the requirement of production compliance and >output limit switch;
electromagnet compatibility. >XLR balance input;
>90VAC~260VAC universal power supply; >Paralleled professional speaker connector provides high current
>premium components; operation;
>variable speed fan for cooling; >Professional reliable 32A power socket
>module design for convenient maintenance; >Thermal protection and indication;
>2 channel and 4 channel design to suit for touring show; >Overload control offers continuous output;
>Reliable performance; >DC output protection
>low voltage protection;
>Limit/problem indication;

P122
MODEL AG2300 AG4200 AG4150 AG2200 AG2150
8Ω/stereo 2×3000W 4×2000W 4×1500W 2×2000W 2×1500W
Rated power(THD=1%, 4Ω/stereo 2×5100W 4×3400W 4×2550W 2×3400W 2×2550W
continuous sine 1kHz *2Ω/stereo 2×7140W 4×4760W 4×3570W 2×4760W 2×3570W
each channel working 16Ω/bridge 1×6000W 2×4000W 2×3000W 1×4000W 1×3000W
simultaneously) 8Ω/bridge 1×10200W 2×6800W 2×5100W 1×6800W 1×5100W
*4Ω/bridge 1×14280W 2×9520W 2×7140W 1×9520W 1×7140W
RMS output voltage (THD=1%,1kHz) 154.9V 126.5V 109.5V 126.5V 109.5V
Slope(1kHz, bypass LPF) 50V/us
Sensitivity(Rated Power,1kHz) selectable 41dB, 38dB, 35dB, 32dB
THD+N (10% rated output power) 0.01%
IMD-SMPTE(10% rated output power) 0.01%
DIM30(10% rated output power) 0.01%
Crosstalk rejection(less than rated
≥90 dB
power 20 Hz ~1 kHz)
Frequency response(10% rated
±0.2dB
output power 8Ω 20Hz~20 kHz)
Input impedance 20kΩ(bal) ,10kΩ(unbal)

Damping factor 8Ω 20Hz~200Hz) ≥300

S/N ratio (A weighted 20Hz~20kHz) ≥115dB ≥112dB ≥110dB ≥112dB ≥110dB

Power supply 90~260VAC,50~60 Hz
protection Protection:Under voltage, DC, Over temperature; Limiter: Over temperature,Over load, Short .
Dimension (W×H×D) 483×44×465mm 483×44×370mm
Net weight 12kg 9kg

*Test condition: 20ms, 1KHz, THD+N=1%

MODEL AG4100 AG2100 AG4065 AG2065

8Ω/stereo 4×1000W 2×1000W 4×650W 2×650W
Rated power(THD=1%, 4Ω/stereo 4×1700W 2×1700W 4×1100W 2×1100W
continuous sine 1kHz,each *2Ω/stereo 4×2890W 2×2890W 4×1870W 2×1870W
channel working 16Ω/bridge 2×2000W 1×2000W 2×1300W 1×1300W
simultaneously) 8Ω/bridge 2×3400W 1×3400W 2×2200W 1×2200W
*4Ω/bridge 2×5780W 1×5780W 2×3740W 1×3740W
RMS output voltage (THD=1%,1kHz) 89.4V 89.4V 72.1V 72.1V
Slope(1kHz, bypass LPF) 50V/us
Sensitivity(Rated Power,1kHz) selectable 38dB, 35dB, 32dB, 29dB
THD+N (10% rated output power) 0.01%
IMD-SMPTE(10% rated output power) 0.01%
DIM30(10% rated output power) 0.01%
Crosstalk rejection(less than rated
≥90 dB
power 20 Hz ~1 kHz)
Frequency response(10% rated
±0.2dB
output power 8Ω 20Hz~20 kHz)
Input impedance 20kΩ(bal) ,10kΩ(unbal)
Damping factor 8Ω 20Hz~200Hz) ≥300
S/N ratio (A weighted 20Hz~20kHz) ≥109dB ≥109dB ≥108dB ≥108dB
Power supply 90~260VAC,50~60 Hz
protection Protection:Under voltage, DC, Over temperature; Limiter: Over temperature,Over load, Short .
Dimension (W×H×D) 483×44×370mm
Net weight 9kg

*Test condition: 20ms, 1KHz, THD+N=1%

P123
 AK Series
Network intelligent power amplifier(DSP)

Introduction:
1. Power Supply
“AK” intelligent power supply of the power amplifier is quasi resonant full bridge topology, the high-frequency transformer magnetic core
using cutting-edge technology of nanomaterials. It has the advantage of high power efficiency, big power, and use high power tube as the
full bridge switch tube, the power of the internal resistance is low. It can provide high current moment to load. Match the mega bass have
enough energy to control paper cone. The presentation of good strength.

2. Amplifying Circuit
“AK” intelligent amplifier can work long hours and under pressure with a loud voice power not smaller and it also won't appear overheating
protection. Power amplifier inside there is a real time automatic detection of load impedance circuit. So when the load impedance is lower
than the product of the preset value, detection circuit will call this information is sent to a gain of self-locking circuit. Circuit will make some
corresponding adjustment, in does not affect the products under the premise of stable work, the output power will adjust according to the
size of the load accordingly, so as to ensure the stability of the product, and doesn't affect the use of the load.
“AK” intelligent power amplifier is not easy to overheating protection; the efficiency of the whole machine can reach 89 in 8 Ω conditions.
So in normal use is not easy to appear the phenomenon of overheating protection. If due to environment or other reasons lead to rapid
temperature rise of the power amplifier, at a certain temperature, the power amplifier within the sensor will automatically by the MCU to
turn up the volume fell by 1 dB, at this time if the temperature continues to rise, the volume is automatically drop 1 dB, stop rising and start
falling, if the temperature when dropped to a certain temperature, the volume is automatically increased, so far has been added to the initial
value. And it has the very good music quality as class AB amplifier, and the efficiency of class D power amplifier.

3. Complete Appliance
“AK” intelligent signal amplification signal processing of the power amplifier and power supply are interrelated. In power amplifier is started,
the total control circuit can automatically detect the relevant circuit state, confirmed after each part of the circuit there is no problem to start
work. In the process of work, each part of the circuit with MCU can own working state real time detection, and the data sent to the rest
of the associated circuits. Other parts at the same time bring the MCU also in the working state of the field testing itself, and to send the
information to the rest of the associated circuit, for mutual exchange. In the process of information exchange, if data change in one part of
the circuit, then the other circuit will automatically make the corresponding adjustment, make the product stability and reliability to improve
on an unprecedented scale.

4. Built-in high-performance DSP processor

“AK” intelligent power amplifier built-in DSP has: high performance double 32 - bit audio dedicated floating-point processor, high
performance A/D, D/A converter; Each channel has 5 parametric equalizer, all parameters are adjustable; Multiple frequency division mode,
6db, 12db, 24db or 48db NingKe - sharp, beisaier, butterworth; Each channel has its own latency, maximum 80 ms and 0.1 ms delay
interval; Each channel is independent of compressors and limiter, all parameters can be adjusted; Function of phase inversion, digital noise
gate; 30 users memory, intuitive and friendly computer interface, RJ45 interface; Channel Copy function, convenient debugging and so on
many merits.

P124
Model AKT700 AKT1000 AKT1600 AKT2400
Number of input channels 2 2 2 2
Number of output channels 2 2 2 2
RMS. Output Power(EIA (AC230V)
8 ohms ch. 700W 1000W 1600W 2400W
4 ohms ch. 1200W 1700W 2700W 3800W
2 ohms ch. 1200W 1700W 2700W 3800W
8 ohms bridged 2000W 2800W 4600W 6200W
4 ohms bridged 2000W 2800W 4600W 6200W
Special function
Built-in DSP processor YES YES YES YES
The matrix of input signal NO NO NO NO
PC Monitor YES YES YES YES
Standby system YES YES YES YES
Dimensions / Weight
Dimensions (W/H/D) 483 mm*88 mm (2 U) *440 mm(Depth contains handle and the rear support)
Weight 14kg 14kg 14.5kg 15 kg
Appearance Black painted steel chassis with black painted steel/aluminum front

Model AKF700 AKF1000 AKF1600

Number of input channels 4 4 4
Number of output channels 4 4 4
RMS. Output Power(EIA (AC230V)
8 ohms ch. 700W 1000W 1600W
4 ohms ch. 1200W 1700W 2600W
2 ohms ch. 1200W 1700W 2600W
8 ohms bridged 2000W 2800W 4200W
4 ohms bridged 2000W 2800W 4200W
Special function
Built-in DSP processor YES YES YES
The matrix of input signal YES YES YES
PC Monitor YES YES YES
Dimensions (W/H/D)(2 U) 483 mm*88 mm *475 mm
Weight 16kg 16kg 18 kg

Overall Efficiency & Input Characteristics

Overall Efficiency (8 ohms) 89%
Inputs Sensitivity 0~20dB
Inputs Impedance 30KOHM(balanced, stereo )  15KOHM (unbalanced, parallel)
Frequency response 20-20000Hz(±0.3dB)
Slew rate >30V/us
Damping factor 200-1000(tunableness)
S/N(A weighted) >100dB
Audio Performance
THD+N 20Hz-20KHz for 1W <0.03%
THD+N at 1KHz and 1dB below clipping <0.06%
Frequency response (1W into 8 ohms,20Hz-20KHz) ±0.3dB
Common Mode Rejection(CMR) 20 Hz ~ 1 KHZ >78dB
Internal sample rate 96KHz
Internal data path 32bit floating point
Sample Rate Converters
THD + Noise 0.003 %, 20 Hz - 20 KHz, unweighted
Analog to Digital inputs
THD + Noise 0.022 %,typical at 1kHz unweighted at +26dBu headroom setting

P125
 EP Series
Voltage Regulator

EP11

EP12

Features:
> Voltage and current display on front panel b. Over current protection: If the overall output current is
> Voltage convert switch to convert 230V or 240V on rear panel. When over 30A, it shuts down the outputs
230V is selected, the input voltage fluctuation range is 180-260V, c. Low voltage alarm: If the input AC voltage is lower than
and output voltage is 230V. When 240V is selected, the input voltage
180V, the orange LED on the front panel lights up.
fluctuation range is 190V-270V, and the output voltage is 240V. If the
input voltage is over 275V, the regulator goes to protection status and
shuts off output.
> Advanced power surge protection
> Line filtering with ultra-low noise
Model EP11 EP12
> 10 output connectors, six 10A connectors (one group 4 and one
Max current 30A 16A
group 2) on the rear panel.
Regulated voltage 180~250VAC/50Hz 180~250VAC/50Hz
> The total load current is 30A Over voltage Protectoin 275±3VAC 275±3VAC
> Protection: Power consumption 17W(idle) 17W (idle)
a. Over voltage protection: if the input voltage is over 275V, it shuts Dimension 482.6x597x133.5mm 482 x 400 x 88mm
down the outputs Weight 26kg 15kg

P126
AL Series
Professional Power Amplifier

AL1200

Features:
> Heatsink and variable speed fan for cooling modulation distortion
> Loop transformer to offer sufficient power supply > Stereo/parallel/bridge mode
> Perfect contour; standard rack mounting holes > Signal /clip LED for each channel
> Limit/soft start/DC/short circuit/thermal protection > Gain control on front panel
> Built-in limiter to prevent speaker from damage > SMD components for reliable performance
> Prominent tone, signal conversion, extremely low THD/SMPTGE-IM/transient > Transistor connected with heatsink for cooling

MODEL AL400 AL700 AL1200 AL1600 AL2000

Output Power 8Ω 2x200W 2x350W 2x700W 2x800W 2x1000W
Output Power 4Ω 2x300W 2x450W 2x990W 2x1250W 2x1350W
Bridge Output power 8Ω 600W 900W 2×1980W 2550W 2700W
Input Sensitivity 0.775V / 1.4V
Frequency response(@1W) (20Hz-20KHz)±1dB
S/N ratio (A weighted) >100dB
THD(rated output power) <0.5% (20Hz-20kHz)
Crosstalk A-weighted) ≥70dB
Damp Factor(1kHz 8Ω) >200 >200 >200 >200 >200
Protection Audio Limiters,High Temperature,DC,Short Circuit,HF,Peak Current Limiters,Turn-on Delay
Power Requirements 110~120@220~240AC 50/60Hz
Weight 13kg 14.5kg 15g 15.8kg 18.5kg
Dimension (W×H×D)mm 482x353x88 482x353x88 482x353x88 482x353x88 482x403x88

P127
 AD Series
Professional Power Amplifier

AD2200
AD4000

AD2200 Rear Panel

INTRODUCTION
AD series features compact contour, perfect tone, excellent > Professional protection
performance, unique circuit, high load capacity and perfect protection, > Dual side PCB and SMD to improve the stability;
including DC/input limit/over-load output/short-circuit/thermal/power > Variable speed fan for cooling;
surge/soft-start protection and limit/compression to ensure the reliable > Stereo/parallel/bridge mode
performance. > Light weight for easy transportation

FEATURES APPLICATION
> 2U/3U height, compact contour; Entertainment venue, stadium, touring show, theater,
> Class AB&H circuit cinema, etc;

MODEL AD600 AD900 AD1500 AD2200 AD3000 AD4000

Stereo power 8Ω 2x200W 2x300W 2x500W 2x700W 2x1050W 2x1200W
Stereo power 4Ω 2x300W 2x450W 2x750W 2x1100W 2x1500W 2x2000W
Bridge power 8Ω 600W 900W 1500W 2200W 3000W 4000W
Frequency response(@1W) 20Hz-20kHz ±0.5dB
THD(rated output power) ≤0.05% ≤0.05% ≤0.05% ≤0.05% ≤0.05% ≤0.05%
Damping factor (1kHz 8Ω) ≥200 ≥300 ≥300 ≥300 ≥300 ≥300
S/N ratio (A weighted) ≥100dB ≥100dB ≥100dB ≥100dB ≥100dB ≥100dB
Input sensitivity 0dBu 0dBu 0dBu 0dBu 0dBu 0dBu
Crosstalk (A weighted) ≤70dB ≤70dB ≤70dB ≤70dB ≤70dB ≥70dB
Protection Limit/thermal/DC/short circuit/delay start protection
Voltage AC230V/50Hz
Dimension ((W×D×H)mm 483x320x88.8 483x320x88.8 483x320x88.8 483x380x88.8 483x495x133.3 483x495x133.3
Weight 14kg 16kg 17kg 21.5kg 31kg 38kg

P128
AE Series
Professional Power Amplifier

AE900
AE1500
AE2200

AE3000
AE4000

Introduction
AE series is the latestst Soundking amplifiers , compact & solid >Professional protection: DC protection,
protection short circuit protection,
onents, perfect tone, excellent performance,
design, refined components, thermal protection, over load protection, CLIP/LIMIT protection
unique circuit, power load to meet various professional requirement. >Variable speed fan for cooling, low noise;
Protection circuit ensures safety and reliability. This series include >Stereo, mono, bridge mode for selection;
AE900, AE1500, AE2200 and AE3000. Output power covers the >Low weight, convenient for installation and transportation
range from 900W to 3000W. Applications
Features Mainly used in large/medium sized application, e.g. stadium,
>Standard 2U/3U height, compact and solid appearance; dancing hall, cinema, etc;
>Class H circuit, low temperature, high efficiency, stable performance;

AE2200 Rear panel

MODEL AE900 AE1500 AE2200 AE3000 AE4000

Output Power 8Ω 2x300W 2x500W 2x700W 2x1000W 2x1200W
Output Power 4Ω 2x450W 2x750W 2x1100W 2x1500W 2x2000W
Bridge Output power 8Ω 900W 1500W 2200W 3000W 4000W
Input Sensitivity 1.4V/32dB/26dB
Frequency Response (20Hz-20kHz)±0.5dB
S/N Ratio(A-weighted) 100dB
THD at rated output power <0.05%(MBW=80kHz,1kHz)
Crosstalk (A-weighted) ≥70dB
Damp Factor(1kHz 8Ω) >300 >300 >300 >300 >300
Protection Audio Limiters,High Temperature,DC,Short Circuit,HF,Peak Current Limiters,Turn-on Delay
Power Requirements 110~120@220~240AC 50/60Hz
Weight 16kg 17kg 21.5kg 31kg 38kg
Dimension(W×D×H)mm 483x320x88 483x320x88 483x380x88 483x380x133.3 483x495x133.3

P129
 AP Series
Audio Processor

Introduction:
AP24/AP36/AP48 features 2CH/3CH/4CH balanced input, 4CH/6CH/8CH balanced output, 24bit 48kHz sampling rate, ∑-
AD/DA converter and 32bit DSP chip. Input section includes 8 processing units - gain, mute, noise gate, high cut, low cut, 8
PEQ, phase, delay; output section includes 7 processing units - crossover, 5 PEQ, gain, mute, limit, phase, delay; free matrix
distribution between all inputs and outputs; crossover, gain and band width of all PEQ adjustable, type: peak, high shelving,
low shelving; type of all high/low cut filter and crossover: Butterworth, Linkwitz-Riley, Bessel; -6dB/Oct to -48dB/Oct slope;
threshold, ratio, start time and recovery time of all limiter/compressor continuously adjustable; threshold, start time and recovery
time of all noise gate continuously adjustable; maximum 682ms delay time for all delay module, 0.021ms step; free copying of
parameters between any channels; built-in signal generator with 32 presets; PC software control via USB or RS232; remote
timing cascade control over as many as 256 units via RS485.

AP24/AP36/AP48

Features:
> 2 x 4 digital matrix processor, 2CH bal input, 4CH bal output; > Maximum 682ms delay time for all delay module;
3 x 6 digital matrix processor, 3CH bal input, 6CH bal output; > Free copying of parameters between any channels;
4 x 8 digital matrix processor, 4CH bal input, 8CH bal output; > Built-in signal generator, pink/white noise output mode, 20Hz
24bit 48kHz sampling rate, ∑- ӛ AD/DA converter, 32bit DSP to 20kHz sine wave adjustable, signal amplitude adjustable;
chip; > Input section includes 8 processing units - gain, mute, > 2x20 LCD screen, custom buttons with lamp, one button
noise gate, high cut, low cut, 8 PEQ, phase, delay; operation, easy and fast;
> Output section includes 7 processing units - crossover, 5 > 32 user presets, each preset saved or called alone, password
PEQ, gain, mute, limit, phase, delay; protection supported;
> Free matrix distribution between all inputs and outputs; > PC software remote control via USB or RS232;
> Crossover, gain and band width of all PEQ adjustable, type: >Cascade control over as many as 256 units via RS485, remote
peak, high shelving, low shelving; network control by center control system supported.
> Type of all high/low cut filter and crossover: Butterworth,
Linkwitz-Riley, Bessel, -6dB/Oct to -48dB/Oct slope,
20Hz~20kHz frequencies continuously adjustable;
> Threshold, ratio, start time and recovery time of all limiter/
compressor continuously adjustable;
> Threshold, start time and recovery time of all noise gate
continuously adjustable;

P130
 AP24 AP36 AP48
Input 2x XLR bal 3x XLR bal 4x XLR bal
Output 4x XLR bal 6x XLR bal 8x XLR bal
Impedance 1MΩ/stereo input, 500KΩ/mono input
Max input level +12dBu
CMRR >50dB (30Hz~20kHz)
Output
Impedance <500Ω, bal output
Max input level +12dBu
Frequency response 20Hz~20kHz,±0.5dB
THD >110dBu
Distortion <0.01% at 1kHz(-10dBu)
Max delay 668ms
Output gain -60dB~+12dB ±0.5dB
Input gain -60dB~+12dB ±0.5dB
PEQ 5 IN, 7OUT
Filter
Gain ±12dB in 0.5dB steps
Center frequency 20Hz~20kHz
Q value 0.4~128
Shelving filter frequency response
Lo-shelf 19.7Hz~1kHz
Hi-shelf 1kHz~20.6kHz
Shelf gain ± 12dB in 0.5dB steps
HPF&LPF
Filter
Frequency (high pass) <10Hz~16.0kHz
Frequency (low pass) 35Hz~22.0kHz
Response curve Butterworth 6dB 12dB 18dB 24dB
Bessel 6dB 12dB 18dB 24dB
Linkwitz-Riley 12dB 18dB 24dB
Limiter
Threshold (level) -90~+12dB
Rise time 1~200ms
Fall time 1~1000ms
Power supply 90V-260V AC 50HZ

Cascade connection and data conversion diagram

Converter

P131
 AP Series
Audio Processor

AP88
AP88

Features:
> 32bit DSP chip, 96kHz sampling rate, 24bit AD/DA converter;
> Input section includes high cut, low cut, PEQ, noise gate, gain, mute, phase, linkage, volume group and other processing units;
> Output section includes crossover, PEQ, gain, mute, limit, phase, delay, linkage, volume group and other processing units;
> Gain, band width and frequency of all channels continuously adjustable, type: PEQ, low shelving filter, high shelving filter, low cut filter,
high cut filter, first order phase shift, second order phase shift;
> Free matrix distribution between all inputs and outputs, name of all channels changeable;
> All input&output channels with independent phase curve adjustment, 180°/ 360° curve adjustment respectively for first/second order
phase shift when it comes to PEQ type;
> Type of all high/low cut filter and crossover: Butterworth, Linkwitz-Riley, Bessel; slope adjustable;
> Threshold, start time and recovery time of noise gate continuously adjustable for input channel; threshold, ratio, start time and recovery
time of compressor/limiter continuously adjustable for output channel;
> Maximum 680ms delay time for each delay module of all output channels;
> Free copying of parameters and linkage adjustable between any channels;
> PEQ curve graph for all current input/output channels visible from any single input/output channel;
> Built-in signal generator, pink/white noise output mode, 20Hz to 20kHz sine wave adjustable, signal amplitude adjustable;
> Input&output level indicators and USB port at front panel, 232&485 and Ethernet port at rear panel, one button connection, easy and
fast, wireless PC mixing supported;
> 21 user presets, whole state and each preset saved or called alone. ID setting enables cascade control over as many as 256 units,
password protection function for great security.

AP88
System specification Frequency response
Dynamic range
Distortion
Crosstalk
CMRR
Input Type
Max input level
Impedance
Output Type
Max output level
Impedance
Digital Processing 24bit sigma-delta AD/DA converter
32 bit DSP, 48kHz sampling rate
Display Lattice LCD to show current parameters and all the other settings
Power Supply AC 95V-250V 50/60Hz
Dimension 482*205*44mm
Weight 2.88kg

P132
DP Series
Audio Processor

DP24

DP24/DP26 is a cost effective 2 in 4 out/2 in 6 out digital audio processor. They aim to meet the requirements of middle and low budget
market for the most suitable audio processing and field control. This processor includes 2 analog inputs and 4 analog outputs, a powerful
M704 DSP and 24bit AD/DA converter, each channel featuring 11-band PEQ, gain control, noise gate, dynamic bass boost, RMS limiter,
internal pink/white noise generator and adjustable delay. Each output provides maximum 7-band PEQ whose slope can reach as high
as 48dB/Oct. Each output can select peak compressor, RMS limiter and delay. In addition, output channel 1 and output channel 3 are
equipped with dynamic loudness filter.

DP24
Analog input/output 2 x XLR bal/ 4 x XLR bal
Min load 150 ohm
THD+N 0.001% at 1kHz 0dBu
S/N >106dBA
Frequency response 20Hz - 20kHz; ±0.5Bu at 20Hz and 20kHz
DSP M704, 24x32bit filter processing, 54bit accumulator register, 96bit precision intermediate data calculation
PEQ 11-band EQ input; 7-band EQ output
Filter gain -15dBu~+15dBu, step: 0.5dBu
Input&output gain Input: -12dB~+12dB, step: 0.1dBu
Output: -18dB~+12dB, step: 0.1dBu
Center frequency 1Hz per step adjustment within 20Hz~20kHz
Q value/broadband 0.4~128
High/low pass filter Butterworth slope: 6/12/18/24/36/48dB per octave
Bessel slope: 12/24dB per octave
Linkwitz-Riley slope: 12/24/36/48dB per octave
Noise gate Threshold: -90dBu~-60dBu; control start time: 1ms~1,000ms; release time: 10ms~1,000ms
RMS limiter Threshold: -14dBu~+16dBu, bypass adjustable ratio: 2:1~32:1; knee: 0~100%
Fill: -12dBu~+12dBu; control start time: 5ms~200ms; release time: 0.1s~3s
Peak compressor Threshold: -14dBu~+16dBu
Control start time: 5ms~200ms; release time: 0.1s~3s
Delay Max 900ms delay for each input; max 340ms delay for each output, 10.4us per step

DP26
Analog input/output 2 x XLR bal/ 6 x XLR bal
Min load 150 ohm
THD+N 0.001% at 1kHz 0dBu
S/N >106dBA
Frequency response 20Hz - 20kHz; ±0.5Bu at 20Hz and 20kHz
DSP M704, 24x32bit filter processing, 54bit accumulator register, 96bit precision intermediate data calculation
PEQ 11-band EQ input; 7-band EQ output
Max 900ms delay for each input; max 340ms delay for each output
Filter gain -12dBu~+12dBu, step: 0.5dBu
Input&output gain Input: -12dB~+12dB, step: 0.1dBu
Output: -18dB~+12dB, step: 0.1dBu
Center frequency 1Hz per step adjustment within 20Hz~20kHz
Q value/broadband 0.4~128
High/low pass filter Butterworth slope: 6/12/18/24dB per octave/ Bessel slope: 12/18/24dB per octave
Linkwitz-Riley slope: 12/24/36/48dB per octave
Noise gate Threshold: -90dBu~-60dBu; control start time: 1ms~1,000ms; release time: 10ms~1,000ms
RMS limiter Threshold: -14dBu~+16dBu; bypass adjustable ratio: 2:1~32:1; knee: 0~100%
Fill: -12dBu~+12dBu; control start time: 5ms~200ms; release time: 0.1s~3s
Peak compressor Threshold: -14dBu~+16dBu
Control start time: 5ms~200ms; release time: 0.1s~3s
Delay Max 900ms delay for each input; max 340ms delay for each output

P133
 DP Series
Audio Processor

DP44/DP48

DP44 is a high-end 4 in 4 out audio processor. 4 input level indicators comprise 5 level, 1 clip and 1 limit; 4 output level indicators comprise 5
level, 1 clip and 1 limit. This processor includes 24bit AD/DA converter that features 4 analog input, 1 stereo input and 4 analog output. The
powerful M716 DSP manages analog output and can run as high as 96kHz process. This processor supports 2 different full matrix mixing
modes: 1) input channel can mix output channel at any ratio; 2) each output channel can mix other output channel at any ratio.

DP48 is a cost effective 4 in 8 out digital audio processor, suitable for live show, fixed installation and many other applications. 4 analog input
and 8 analog output are processed by the powerful M716 DSP. Besides the high performance 24bit AD/DA converter, each channel features
30-band PEQ, gain control, RMS limiter and adjustable delay. Each output provides maximum 7-band PEQ whose slope ranges from 6dB/
Octave to 48dB/Octave. Each output can select peak compressor and adjustable delay. In addition, high and low pass filter is also available.

DP44
Analog input 24 x XLR bal
Analog output 4 x XLR bal
Min load 150 ohm
THD+N 0.001% at 1kHz 0dBu
S/N >110dBA
Frequency response 20Hz - 20kHz;-0.5dBu at 20Hz and 20kHz
AD/DA converter 1×AK5388 24bit,2×AK4396 24bit-96kHz
DSP M716, 24x32bit filter processing, 54bit accumulator register, 96bit precision intermediate data calculation
PEQ 13-band EQ input; 11-band EQ output
Filter type Each equalising filter can be set as Bell, Shelving, high/low pass, band pass, notch or all pass filter
Filter gain -15dBu~+15dBu, step: 0.5dBu
Center frequency 1Hz per step adjusting within 20Hz~20kHz
Q value/band width Bell filter: 0.4~128, step: 100; Shelving/high/low pass filter:0.1~5.1, step:100; band pass/all pass/notch filter: 4~104, step:100
High/low pass filter Butterworth slope: 6/12/18/24/36/48dB per octave; Bessel slope: 12/24dB per octave; Linkwitz-Riley slope: 12/24/36/48dB per octave
RMS limiter Threshold: 20dBu~-10dBu; adjustable ratio: 2:1~32:1; knee: 0~100%
Fill: -12dBu~+12dBu; control start time: 5ms~200ms; release time: 0.1s~3s
Delay 400ms, step: 21us

P134
 DP48
Analog input 4 x XLR bal
Analog output 8 x XLR bal
Min load 150 ohm
THD+N 0.001% at 1kHz 0dBu
S/N >110dBA
Frequency response 20Hz - 20kHz;-0.5dBu at 20Hz and 20kHz
AD/DA converter CS42528 24bit -48kHz
DSP M716, 24x32bit filter processing, 96bit precision intermediate data calculation
PEQ 30 filters for input; 7 filters for output
Filter type Bell, high/low Shelving, high/low pass, band pass, notch or all pass filter as optional
Filter gain -15dBu~+15dBu, step: 0.5dBu
Input&output gain -18dB~+12dB, step: 0.1dBu
Center frequency 1Hz per step adjusting within 20Hz~20kHz
Q value/band width Shelving/high/low pass filter: 0.1~5.1; Bell filter: 0.4~128
Band pass/all pass/notch filter: 4~104
High/low pass filter Butterworth slope: 6/12/18/24dB per octave; Bessel slope: 12/24/48dB per octave; Linkwitz-Riley slope: 12/24/48dB per octave
Noise gate Threshold: -80dBu~-50dBu; control start time: 1ms~1,000ms; release time: 10ms~1,000ms
RMS limiter Threshold: -14dBu~+16dBu; bypass adjustable ratio: 2:1~32:1; knee: 0~100%; fill: -12dBu~+12dBu; control
start time: 5ms~200ms; release time: 0.1s~3s
Peak compressor Threshold: -14dBu~+16dBu; bypass control start time: 1ms~900ms; release time: 0.1s~5s
Input/output channel polarity Positive (0°)/negative (180°) as optional
Input/output channel muting ON/OFF
Delay Max 420.998ms delay for each input; max 128.998ms delay for each output

P135
 DP88

DP88 supports 4 ways to realize remote control and network configuration. PC to single machine: connect a PC via USB, realize full
control via PC software; PC to multimachine: connect a PC via RS485, realize full control via PC software; connect a wall controller via
TCP/IP function, realize full control via PC software; connect a wall controller via RS485, realize simple control via wall controller. PC
software can control all functions of the machine, including editing and uploading presets to the machine. 8 channels can all support line
or mic in and distribute to 8 outputs via 8*8 matrix.

DP88
Analog input 8 bal
Analog output 8 bal
Max input level line:+18dBu; mic:-18dBu
Max output level +18dBu
THD+N 0.005% at 1kHz 0dBu
S/N >104dBu
Frequency response 20Hz - 20kHz±1dBu
AD/DA converter 4×AK5385B 24bit 1×AK4358 24bit
DSP Dream SAM3716, 24x32bit filter processing, 96bit precision intermediate data calculation
Input EQ Each input channel has 3 Bell or Shelving filters
Output EQ Each output channel has 5 Bell or Shelving filters
Filter type Symmetric Bell or high/low Shelving to the second level command
Filter gain Bell or Shelving gain: ±12dBu, step: 0.5dBu
Center frequency 1/24th octave resolution per step within ±20Hz
Q value/band width Q/BW range: 0.4/3.59~10/0.0312; Q/BW step: 0.1 res
High/low pass filter The first level command (Butterworth -6dB/Oct) to the fourth level command (Butterworth, Linkwitz-Riley or Bessel -24dB/Oct
RMS limiter Threshold: 18dBu~-12dBu
Test time: 5ms~200ms (1ms res~20ms; 10ms res~100ms; 20ms~200ms)
Release time: 0.1s~3s (0.1s res)
Ratio: 1:1 (shoot through) ~32:1 (hard limiting), step: 0.1
Delay Max 380.998ms delay for each output, step: 21us
Feedback activation Only available when selecting mic in
Default parameter 6 user call; 4 S1-S4 digital input
Front panel 2x24 LCD screen
Each input has 6 indicators (line/mic/feedback/signal/clip/limit)
1 phantom power indicator
6 key switch potentiometer can control and edit each channel alone
Type B USB connector
Rear panel 2 x 12pin Phoenix connector (mic/line in)
2 x 12pin Phoenix connector (line out)
2 x 4pin Phoenix connector (S1-S4 digital input, level:0-5V)
2 x 4pin Phoenix connector (S1-S4 digital output, level:0-5V)
2 x RJ45-RS485 input/output seat
1 x RJ45- Internet seat (10/100 TCP-IP)
AC supply IEC C13 16A, power socket: rocker switch
90-240V AC (50/60Hz) - 40W
Dimension 482x44x229mm, 1U
Net/gross weight 3.5/4kg

P136
SEQ Series
Loudspeaker Controller

SEQ-1502
SEQ-3102
SEQ-3103

Introduction: Features
The role of equalizer in a sound processing system can not be > Stable performance.
underestimated. Different environment will definitely affect the > The excellency of ratio performance is well recognized in
performance of a sound processing system . It is recommended that a domestic and overseas market.
equalizer should be equipped in your system. SOUNDKING products > Compact and convenient.
SEQ-3103 is your optimal choice. SEQ-3103 and SEQ-3102 are dual > CE & ETL certificated for safety.
31 segment graphic equalizer according to ISO 1/3 otc for its 20Hz- > Transformer balanced output.
20kHz frequency, SEQ-1502 is a dual 15 segment graphic equalizer Application
according to ISO 1/3 otc for its 20Hz-20kHz frequency. Theater, disco, studio, concert, stage show, etc.

MODEL Central Frequency(Hz) Low Cut Filter Range (Optional) Weight

SEQ-1502 25, 40, 63, 100, 160, 250, 400, 630, 1k,1.6k, 2.5k, 4k, 6.3k, 10k, 16k, (Hz) 40Hz built in jumper (-12 ±6dB/±15dB (switchable) 2.5kg
dB/oct)
SEQ-3102 20, 25, 31.5, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, ±6dB/±15dB(switchable) 3kg
800,1k, 1.25k, 1.6k, 2k, 2.5k, 3.15k, 4k, 5k,6.3k, 8k, 10k, 12.5k, 16k, 40Hz (-12 dB/oct)
20k(Hz)

SEQ-3103 20, 25, 31.5, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, 500, 630, ±6dB/±15dB(switchable) 4.0kg
800, 1k, 1.25k, 1.6k, 2k, 2.5k, 3.15k, 4k, 5k, 6.3k, 8k, 10k, 12.5k, 16k, 12Hz-285Hz (-12 dB/oct)
20k(Hz)

MODEL Connector Power Consumption Dimension

SEQ-1502 XLR bal L/R, TRS 1/4” bal input L/R, XLR bal output L/R, TRS 1/4” bal output L/R 17W (AC100~240V, 50~60Hz) 433x183x44mm
SEQ-3102 XLR bal L/R, TRS 1/4” bal input L/R, XLR bal output L/R, TRS 1/4” bal output L/R 17W (AC100~240V, 50~60Hz) 433x183x88mm
SEQ-3103 XLR bal L/R, TRS 1/4” bal input L/R, XLR bal output L/R, TRS 1/4”bal output L/R 17W (AC100~240V, 50~60Hz) 433x183x132mm

P137
 SPS Series
Power Sequencer

SPS30

US Connerctor

EU Connerctor

Introduction
SPS30 power sequencer adopts industrial SCM control, and the TMS telecommunication port uses industrial ARM from TI as the key part.
The built-in filters offer pure power supply.

Features
> 30A industrial input connector
> Multifunction power socket
> One key to turn on the sequence function
> Turn on in turn and turn off conversely Model SPS30
> Each channel turns on/off independently Rated output current 30A
Max current out per CH 20A and 13A
> Input voltage display
Power supply control 10 channel
> Network control port Delay 2 seconds
> 3U height for rack mounting Dimension 133x483x360(mm)

> 10 channel outputs; channel status display on the front panel; Weight 11kg

P138
SPS Series
Power Sequencer

SPS10F(American application)

Introduction
SPS10F power sequencer adopts SCM control, starts each power supply in turns and turns off power supply conversely. It has digital
display to indicate voltage and reduces instant current surge to secure the appliances 10 units at most can be connected and operated
together.
Application: Stereo appliance, computer, TV, broadcast system, etc..

SPS6-U (European application)

Introduction Features
SPS6-U power sequencer adopts SCM control, starts each prevent the electrical facilities from the current surge in the circuit loop.
power supply in turns and turns off power supply conversely. Application:
It has digital display to indicate voltage and reduces instant Apply to stereo, Computer TV, Broadcast system or other electrical
current surge to secure the appliances 6 units at most can be facilities which need sequence power driven system.
connected and operated together. Offer 12V/1.2W lighting

MODEL Output Current Controlling Power Delay (each way power) Illuminance Power
SPS10F 15A 10 way 1 second 2×1.2W

SPS6-U 16A 6 way 1 second 2×1.2W

P139
 AZ Series
Power Sequencer

AZ-8F

AZ-8F Rear

Introduction
This power sequencer features SCM smart control, turning on each channel power in order and turning off reversely
one by one to reduce the transient power surge damage to the equipment, compact contour and reasonable topology
(GZ-8F 2U, GZ-12F 3U), built-in premium filter to reduce the interference, multifunction power socket, digi-display of
the voltage. The power sequencer compatible with TMS system has timing, tele-control, auto-control functions. The
tele-control uses Ethernet structure and supports TCP Server, TCP Client operation modes.

Features Applications
> Multifunction power socket; touring show, PC / TV / PA system, etc.
> One button to turn on the sequence function;
> Turn on in order and off reversely;
> Each channel can be turned on/off independently;
> GZ-8F provides 8 channel power outputs
GZ-12F provides 12 channel power outputs, channel ;status displayed on the
panel;
> Input voltage display;
> Network control connector; turning on/off via the TMS;
> GZ-8F 2U, GZ-12F 3U

Model AZ-8F AZ-12F

Power supply AC 220V/50Hz AC 220V/50Hz
Total out current 30A 30A
Each CH out current 13A 13A
Power control 8 CH 12 CH
Delay time 2s 2s
Dimension
DxWxH
88×483×260(mm) 132×483×260(mm)
Weight 6.5kg 7.8kg

P140
PWB69
Digital Wireless Conference System

WDM69C WDM69D
(Chairman) (Extension)
P6U(active) P6(passive)

PWB69 is a digital wireless conferencing system. It consists of P6U, P6, WDM69D, WDM69C with the featuers, e.g. powerful and systematic
function, convenient and easy operation for the applications in medium/small meeting.

FEATURES:
> 2.4GHZ universal ISM frequency band meets CCC,CE,ROHS, FCC
Packing List
standard
System configuration Model QTY
> Smart power supply: when the master power supply is turned off, the
other slave devices turn off automatically. Flat panel speaker cabinet (active) P6U 1pcs

> Four channels can speak simultaneously (master and slaves). Unlimited Flat panel speaker cabinet (passive) P6 1pcs

number of slaves Master WDM69C 1pcs

> Conference mode: 1st in 1st out and apply for speaking Slave WDM69D 9pcs
> Dual way transmission; recording output connector
Speaker cable / 1pcs
> Battery detection function: when the battery is low, the LED lights up.
Remote control / 1pcs
> ADFHSS technology; system encoded for confidentiality;
> Digital frequency shift technology; strong capacity to prevent from Standard AI case / 1pcs

feedback; round and stable tone; Charger CD69 1pcs

ALUMINUM CASE REMOTE CONTROL CHARGER

(purchase additional cases for (feeds 12 microphones) Enterprise conference room or training room
more slaves)

P141
 WDM 69
Digital Wireless Conference System

WDM69C WDM69D
(Chairman) (Extension)

WDM69M(Main transmitter/receiver)

FEATURES:
1. 2.4GHz universal ISM frequency band meets CCC,CE,ROHS, The advantage of digital transmission:
FCC standard 1. Strong capability to prevent from interference; encoded signal
2. Smart power supply: when the master power supply is turned transmission for confidentiality; low noise; two times frequency of
off, the other slave devices turn off automatically. the analog device; high S/N ratio;
3. Four channels can speak simultaneously (master and slaves). 2. Digital shift technology; Strong capability to prevent from
Unlimited number of slaves feedback; round and stable sound; automatically adjusting the
4. Conference mode: 1st in 1st out and apply for speaking gain; better receiver dynamic;
5. Dual way transmission; recording output connector 3. Not interfered by mobile phone or router.
6. Battery detection function: when the battery is low, the LED 4. Universal 2.4GHZ frequency without law limitation unlimited
lights up. number of slaves; Batteries feed the device up to 10 hours
7. ADFHSS technology; system encoded for confidentiality; continuously. One week standby time;
8. Digital frequency shift technology; strong capacity to prevent
from feedback; round and stable tone;

Model WDM69
Carrier frequency band) 2.4GHz (2400-2830MHz)
WDM69
Frequency response 20Hz-50kHz
Standard Set List:
Extend frequency mode ADFHSS Host: WDM69M x 1
Audio delay ≤ 15MS Chairman: WDM69C x 1
Receiving sensitivity -85 dBu Extension: WDM69D x 9
S/N ratio ≥ 110dB Aluminum-alloy Cabinet x 1
Dynamic range ≥ 110dB Charger: CD69 x 1

Distortion ≤ 0.6%
Max out level 0dB(ij6.3 JACK OUT); 3dB(XLR OUT)
Operation distance 25-30 m( indoors)
Master/slave power supply 3.7V/1000mAH lithium battery
Battery 10h
Master power supply DC-12V/1A

P142
PLL UHF Wireless receiver
Two Channel Wireless Micophone System

FEATURES: W96R
1.Built-in 2*1/4 antenna distribute internet and phantom power signal output , modularity automatic signal selection receiver .
2.Receiver and transmitter adopt industrial level TFT colorful OLED display screen .
3.Aluminum –alloy housing elaborate mechanical processing and surface treatment .
4.Shuttle button with menu operation setting
5.Real –time accurate battery display and under voltage warming will display on the receiver and transmitter
6.Adopts world-class top AF processing chip and high-end RF component which increased the system AF performance to be excellent
and ensured the RF link to be reliable .
7.Eight numbers pilot frequency ID code .

SYSTEM:
Operation range:50m line of sight Input impedance:38 dB Receiver
AF response:50 Hz - 15 kHz RF output power :10 mW EIRP AF output level:Unbalanced+14dBu/
T.H.D:<1% (@AF 1 kHz, RF 46 dBu) Battery:Two AA (LR6) alkaline batteries Balanced +9dBu
Dynamic range:>100 dB A-weighted Operation time:15 hours AF ouput impendance: Unbalanced810
Signal to Noise: >90 dB Handheld Transmitter Ohms/ Balanced 240 Ohms
operation temperature:–10°C (14°F) to +60°C (+140°F) Output Gain Range: 28 dB Imagine rejection:-100 dBm / 30 dB sinad
Pilot frequency:32.768KHz RF output power:10 mW EIRP Operation Voltage:15V
Transmitter(Bodypack): Battery:Two AA (LR6) alkaline batteries
Transmitter(Bodypack):Mini-XLR Operation time:10 hours
Input:1MΩ

W95R/TH Handheld Microphone

FEATURES:
1. UHF dual channel true diversity, infrared frequency matching and pilot
function(easy operation, no crosstalk);
2. Adjustable working distance(both receiver and transmitter designed with
distance control key);
3. Noise free HiFi transmission circuit for clear sound and true reproduction;
4. 300 channels for option, as many as 100 sets for combo use at one
place, perfect for KTV;
5. Receiver designed with multiple squelch control circuit to prevent
external interfering signal;
6. Switching surge protection forsafety use of post-amp and speaker;
7. Effective working distance(unblocked): ≥200m.
W95R/TH

P143
 Single Channel Wireless Microphone

Active antenna distributor

Unidirectional Antennae Button

MAIN FEATURES:
> Active antenna distributor design for many channel structure , up to 4 set
distributors receiver the signal form a pair of antenna. Technical specification:
> Built-in high frequency amplifier device without consumption during operation. Connector :BNC
> The distributor can supply power for 4 set receiver and A pair of antenna Impedance :50Ω
amplifier by BNC connector. Power supply :10-15V ,75mA
> Antenna amplifier is compensate for the consumption of antenna cable length. Receiver mode (3dB wave width) 70angle
> The power supply of W1000 , microphone receiver and amplifier all combine Three layer overload intercept point(OIP3)
using one power adapter. :>30dBm
> Combine two set W1000 can just using one pair of antenna together. Antenna gain :7.5dBi
> One 19’flight case can mount 1set W1000 Signal gain ±1dB switchable +10dBi,0dBi

W89R/TH BODYPACK MICROPHONE

FEATURES:
UHF true diversity twin receiving wireless mic, super strong receiving ability, more stable performance under complex conditions, two-color
large screen with volume display both for receiver and mic, manual SET function key including scan, volume, lock/unlock. Infrared frequency
matching and pilot(noise free), high-end and elegant double layer metal panel.
Traditional digital pilot mode, 150 channels for option, regular 600-900 bands, as many as 20 sets for combo use, no crosstalk or drop,
perfect for the application in school, all kinds of venue, etc;
Elegant, ergonomic and comfortable holding transmitter, high-end metal enclosure, special strip-type switch key to avoid accidental power-
off or muting, removable tail tube and concealed battery compartment, easy frequency adjusting and lock/unlock operation;
Both receiver and mic designed with lock function to avoid mistake operation;
Effective working distance(unblocked): ≥150m.

P144
P145