Instruments Calibration Scope

S.No Discipline / Group Quantity Range / * Calibration Remarks

Measured/ Frequency Measurement
Instrument Capability(±)
1 ELECTRO- AC Current 200 mA to 9 A 0.5% to 0.6% Using DMM
TECHNICAL-
ALTERNATING
CURRENT (< 1 GHZ)
(Measure)
2 ELECTRO- AC Current 5 mA to 200 mA 0.4% to 0.5% Using DMM
TECHNICAL-
ALTERNATING
CURRENT
(Measure) (< 1 GHZ)
3 ELECTRO- AC High Voltage 2 KV to 40 KV 13% High Voltage Probe with
TECHNICAL- DMM
ALTERNATING
CURRENT (< 1 GHZ)
(Measure)
4 ELECTRO- AC Voltage @50Hz 50mV to 900V 0.4% to 0.3% Using DMM
TECHNICAL-
ALTERNATING
CURRENT (< 1 GHZ)
(Measure)
5 ELECTRO- Frequency 50 Hz to 1 kHz 1.2% to 0.7% Using DMM
TECHNICAL-
ALTERNATING
CURRENT
(Measure) (< 1 GHZ)
6 ELECTRO- AC Current @50Hz 10 A to 900 A 2.8% to 1.0% Multi-function Calibrator
TECHNICAL- with Current Coil
ALTERNATING
CURRENT (< 1 GHZ)
(Source)
7 ELECTRO- AC Current @50Hz 20 mA to 10 A 0.5% to 0.4% Multi-function Calibrator
TECHNICAL-
ALTERNATING
CURRENT (< 1 GHZ)
(Source)
8 ELECTRO- AC Current @50Hz 200 µA to 20 mA 0.4% to 0.5% Multi-function Calibrator
TECHNICAL-
ALTERNATING
CURRENT (< 1 GHZ)
(Source)
9 ELECTRO- AC Voltage @50Hz 5 mV to 1000 V 1.1% to 0.2% Multi-function Calibrator
TECHNICAL-
ALTERNATING
CURRENT (< 1 GHZ)
(Source)
10 ELECTRO- Frequency 50 Hz to 1 KHz 1.2% to 0.2% Multi-function Calibrator
TECHNICAL-
ALTERNATING
CURRENT
(Source) (< 1 GHZ)
11 ELECTRO- DC Current 5 mA to 9A 1.20% Using DMM
TECHNICAL- DIRECT
CURRENT (Measure)
12 ELECTRO- DC High Voltage 2 KV to 12 KV 7% to 9% High Voltage Probe with
TECHNICAL- DIRECT DMM
CURRENT (Measure)
13 ELECTRO- DC Voltage 2 mV to 900 V 0.4% to 0.14% Using DMM
TECHNICAL- DIRECT
CURRENT (Measure)
14 ELECTRO- Resistance (2 Wire) 10 M Ohm to 50 M 0.2% to 2.4% Using DMM
TECHNICAL- DIRECT Ohm
CURRENT (Measure)
15 ELECTRO- Resistance (2 Wire) 50 Ohm to 10 M 0.5% to 0.2% Using DMM
TECHNICAL- DIRECT Ohm
CURRENT (Measure)
16 ELECTRO- DC Current 10 A to 900 A 3.30% Multi-function Calibrator
TECHNICAL- DIRECT with Current Coil
CURRENT (Source)
17 ELECTRO- DC Current 2 A to 10 A 0.5 % to 1% Multi-function Calibrator
TECHNICAL- DIRECT
CURRENT (Source)
18 ELECTRO- DC Current 200 µA to 2 A 0.3 % to 0.5% Multi-function Calibrator
TECHNICAL- DIRECT
CURRENT (Source)
19 ELECTRO- DC Voltage 2 mV to 1000 V 0.6% to 1.0% Multi-function Calibrator
TECHNICAL- DIRECT
CURRENT (Source)
20 ELECTRO- Resistance 1 Ohm to 10 M 0.8% to 0.2% Decade Resistance Box
TECHNICAL- DIRECT Ohm
CURRENT (Source)
21 ELECTRO- Resistance 10 M Ohm to 1000 0.2% to 2.4% Decade Resistance Box
TECHNICAL- DIRECT M Ohm
CURRENT (Source)
22 ELECTRO- J Type 500ºC to 1200ºC 2ºC Handy calibrator
TECHNICAL- Thermocouple
TEMPERATURE
(Measure)
23 ELECTRO- J Type -60ºC to 500ºC 2ºC Handy calibrator
TECHNICAL- Thermocouple
TEMPERATURE
(Measure)
24 ELECTRO- K Type 600ºC to 1350ºC 3ºC Handy calibrator
TECHNICAL- Thermocouple
TEMPERATURE
(Measure)
25 ELECTRO- K Type -60ºC to <600ºC 2ºC Handy Calibrator
TECHNICAL- Thermocouple
TEMPERATURE
(Measure)
26 ELECTRO- R Type 50ºC to 1700 4ºC Handy calibrator
TECHNICAL- Thermocouple
TEMPERATURE
(Measure)
27 ELECTRO- RTD (PT-100) -60ºC to 800ºC 1ºC Handy calibrator
TECHNICAL-
TEMPERATURE
(Measure)
28 ELECTRO- S Type 50ºC to 1700ºC 4ºC Handy Calibrator
TECHNICAL- Thermocouple
TEMPERATURE
(Measure)
29 ELECTRO- J Type 500 to 1200º C 2ºC Handy calibrator
TECHNICAL- Thermocouple
TEMPERATURE
30 SIMULATION
ELECTRO- (Source) J Type -60ºC to 500ºC 1 ºC Handy calibrator
TECHNICAL- Thermocouple
TEMPERATURE
31 SIMULATION
ELECTRO- (Source) K Type -60 ºC to <600 ºC 1 ºC Handy calibrator
TECHNICAL- Thermocouple
TEMPERATURE
32 SIMULATION (Source)
ELECTRO- K Type 600 ºC to 1350ºC 2 ºC Handy calibrator
TECHNICAL- Thermocouple
TEMPERATURE
33 SIMULATION (Source)
ELECTRO- R Type 50º C to 1700 ºC 4 ºC Handy calibrator
TECHNICAL- Thermocouple
TEMPERATURE
SIMULATION (Source)
34 ELECTRO- RTD (PT-100) -60 ºC to 800 ºC 1 °C Handy calibrator
TECHNICAL-
TEMPERATURE
35 SIMULATION (Source)
ELECTRO- S Type 50ºC to 1700ºC 4 ºC Handy calibrator
TECHNICAL- Thermocouple
TEMPERATURE
36 SIMULATION
ELECTRO- (Source) Stop Watch 10 sec to 24h 1.3sec to 21sec. Digital Stop Watch
TECHNICAL- TIME &
FREQUENCY
(Measure)
37 MECHANICAL- Bevel Protractors 0 to 180° 9.5 Min Profile Projector
DIMENSION (BASIC
MEASURING
38 INSTRUMENT,
MECHANICAL- Bore Gauge 0 to 2 mm 6.2 µm Slip Gauge, Inside
DIMENSION (BASIC Transmission caliper
MEASURING Movement (2 point)
39 INSTRUMENT,
MECHANICAL- Coating Thickness 0 to 3000 µm 3.3 µm Standard Foil
DIMENSION (BASIC Gauge
MEASURING
40 INSTRUMENT,
MECHANICAL- Combination Sets 0 to 90º 35 Min Profile Projector
DIMENSION (BASIC
MEASURING
41 INSTRUMENT,
MECHANICAL- Depth Micrometer 0 to 300 mm 14 µm Depth Micro Checker,
DIMENSION (BASIC L.C:0.01 Slip Gauge Set
mm
MEASURING
42 MECHANICAL- External 0 to 300 mm 6 um Slip Gauge set
DIMENSION (BASIC micrometer & L.C:0.001
mm
MEASURING Micrometer Head
43 MECHANICAL- External 0 to 300 mm 6.7 µm Using Slip Gauge Set
DIMENSION (BASIC micrometer & L.C:0.01
mm
MEASURING Micrometer Head
44 MECHANICAL- Feeler Gauge 0.03 mm to 1 mm 4 µm DRo with Probe
DIMENSION (BASIC
MEASURING
45 INSTRUMENT,
MECHANICAL- Form Gauges 0 to 200 mm, 360º, 20 µm, 9 min, 20 µm Profile Projector
DIMENSION (BASIC 100
mm Dia Dia
MEASURING
46 MECHANICAL- Internal Micrometer 25 mm to 600 mm 15 µm Slip Gauge Set, Inside
DIMENSION (BASIC L.C:0.01 mm Caliper
MEASURING
47 INSTRUMENT,
MECHANICAL- Lever type dial 0 to 1 mm 2.8 µm Slip Gauge Set, Surface
DIMENSION (BASIC gauge mm plate
48 MEASURING
MECHANICAL- Micrometer Setting 0 to 300 mm 2.2 µm DRO with Probe
DIMENSION (BASIC Sticks
MEASURING
49 INSTRUMENT,
MECHANICAL- Pi Tape 0 to 2000 mm Dia 348vL um Tape Scale calibrator
DIMENSION (BASIC
MEASURING
50 INSTRUMENT,
MECHANICAL- Pistol caliper (Dial 0 to 100 mm 62 µm Slip Gauge Set
DIMENSION (BASIC Gauge) L.C:0.1
mm
MEASURING
51 MECHANICAL- Plunger type Dial 0 to 10 mm 2.5 µm Slip Gauge Set,
DIMENSION (BASIC Gauge L.C:0.001 Comparator Stand
MEASURING mm
52 MECHANICAL- Plunger type Dial 0 to 50 mm 6.2 µm Slip Gauge Set,
DIMENSION (BASIC Gauge L.C:0.01 Comparator Stand
mm
MEASURING
53 MECHANICAL- Radius Gauges 0.6 to 25 mm 52 um Profile Projector
DIMENSION (BASIC (concave and
MEASURING convex profiles)
54 INSTRUMENT,
MECHANICAL- Snap Gauge 0 to 200 mm 5.0 µm Slip Gauge Set
DIMENSION (BASIC
MEASURING
INSTRUMENT,
55 MECHANICAL- Standard Foils 0 to 3000 µm 2.5 µm DRO with Probe
DIMENSION (BASIC
MEASURING
56 INSTRUMENT,
MECHANICAL- Steel Scale 0 to 1000 mm 348vL um Tape Scale calibrator
DIMENSION (BASIC
MEASURING
57 INSTRUMENT,
MECHANICAL- Steel Tape 0 to 5000 mm 348vL um Tape scale calibrator
DIMENSION (BASIC
MEASURING
58 INSTRUMENT,
MECHANICAL- Test Sieve 10 mm to 125 mm 75 µm Digital caliper
DIMENSION (BASIC
MEASURING
59 INSTRUMENT,
MECHANICAL- Test Sieve 75 µm to 10 mm 7.5 µm Profile Projector
DIMENSION (BASIC
MEASURING
60 INSTRUMENT,
MECHANICAL- Thread Pitch 0.4 to 6 mm 9.4 um Profile Projector
DIMENSION (BASIC Gauges for ISO
MEASURING Metric Screw
61 INSTRUMENT,
MECHANICAL- Threads Pitch
Vernier caliper 0 to 1000 mm 29.0 µm Using Slip Gauge Set,
DIMENSION (BASIC L.C:0.02 Caliper Checker
mm
MEASURING
62 MECHANICAL- Vernier caliper 0 to 300 mm 15 µm Using Slip Gauge Set,
DIMENSION (BASIC L.C:0.01
mm Caliper Checker
MEASURING
63 MECHANICAL- Vernier Depth 0 to 300 mm 20.3 µm Using Slip Gauge Set,
DIMENSION (BASIC Gauge L.C:0.02
mm Microchecker
MEASURING
64 MECHANICAL- Vernier height 0 to 600 mm 15.6 um Using Slip Gauge Set,
DIMENSION (BASIC gauge L.C:0.01 Caliper Checker
MEASURING mm
65 INSTRUMENT,
MECHANICAL- Vernier height 0 to 600 mm 16.3 µm Using Slip Gauge Set,
DIMENSION (BASIC gauge L.C:0.02 Caliper Checker
MEASURING mm
66 MECHANICAL- Welding gauge 0 to 300 mm, 60º 49 µm, 9 min Profile Projector
DIMENSION (BASIC
MEASURING
67 INSTRUMENT,
MECHANICAL- Pressure 0 to 19.6 mbar 0.05 mbar Using Digital Pressure
PRESSURE Gauge
68 INDICATING
MECHANICAL- Pressure 0 to 7 bar 0.05 bar Using Digital Pressure
PRESSURE Gauge
69 INDICATING
MECHANICAL- Pressure 0 to 70 bar 0.55 bar Using Digital Pressure
PRESSURE Gauge
70 INDICATING
MECHANICAL- Pressure 0 to 700 bar 1.15 bar Using Digital Pressure
PRESSURE Gauge
71 INDICATING
MECHANICAL- Pressure 0 to 980 bar 2.7 bar Using Digital Pressure
PRESSURE Gauge
72 INDICATING
MECHANICAL- Torque Wrench 200 Nm to 2000 2.5 %rdg. Torque Sensor with
TORQUE (Type- II Class A & Nm Digital Display as per
73 GENERATING
MECHANICAL- B)
Glass Burette 0.1 ml to 100 ml 12.0 µl ISO 6789:
Using 2003
digital Balance
VOLUME (d=0.0001 g) with distill
water of known density
74 MECHANICAL- Glass Pipettes 0.1 ml to 100 ml 56.9µl as per digital
Using ISO 4787
Balance
VOLUME (d=0.0001 g) with distill
water of known density
75 MECHANICAL- Volumetric Flask, 1 ml to 200 ml 56.9µl as per digital
Using ISO 4787
Balance
VOLUME Beaker & (d=0.0001 g) with distill
Measuring Cylinder water of known density
76 MECHANICAL- Volumetric Flask, 1000 ml to 2000 ml 100µl as per digital
Using ISO 4787
Balance
VOLUME Beaker & (d=0.01 g) with distill
Measuring Cylinder water of known density
77 MECHANICAL- Volumetric Flask, 200 ml to 1000 ml 99.59 µl as per digital
Using ISO 4787
Balance
VOLUME Beaker & (d=0.01 g) with distill
Measuring Cylinder water of known density
as per ISO 4787
78 MECHANICAL- Weighing Balance 0 to 210 g 0.001 g Using Standard Weights
WEIGHING SCALE E2 with d=0.1 mg,
AND BALANCE Calibration of Weighing
79 MECHANICAL- Weighing Balance 210 g to 600 g 0.20 g balance
Using class II Weights
Standard and
WEIGHING SCALE E2 with d=10 mg,
AND BALANCE Calibration of Weighing
80 MECHANICAL- Weighing Balance 3 kg to 30 kg 0.95 g balance class II Weights
Using Standard and
WEIGHING SCALE E2 with d=1 g,
AND BALANCE Calibration of Weighing
81 MECHANICAL- Weighing Balance 600 g to 3 kg 0.58 g balance class II Weights
Using Standard and
WEIGHING SCALE E2 with d=10 mg,
AND BALANCE Calibration of Weighing
82 MECHANICAL- Mass 0.001 g 0.08 mg balance class
Standard II and
Weights E2
WEIGHTS Class and 200 g
weighing Balance with
83 MECHANICAL- Mass 0.002 g 0.09 mg readabilityWeights
Standard (0.0001 E2
g)
WEIGHTS Class and 200 g
weighing Balance with
84 MECHANICAL- Mass 0.005 g 0.11 mg readability (0.001 g)
Standard Weights E2
WEIGHTS Class and 200 g
weighing Balance with
readability (0.001 g)
85 MECHANICAL- Mass 0.010 g 0.08 mg Standard Weights E2
WEIGHTS Class and 200 g
weighing Balance with
readability (0.0001 g)
86 MECHANICAL- Mass 0.020 g 0.12 mg Standard Weights E2
WEIGHTS Class and 200 g
weighing Balance with
readability (0.0001 g)
87 MECHANICAL- Mass 0.050 g 0.09 mg Standard Weights E2
WEIGHTS Class and 200 g
weighing Balance with
readability (0.001 g)
88 MECHANICAL- Mass 0.100 g 0.00009 g Standard Weights E2
WEIGHTS Class and 200 g
weighing Balance with
readability (0.0001 g)
89 MECHANICAL- Mass 0.200 g 0.16 mg Standard Weights E2
WEIGHTS Class and 200 g
weighing Balance with
readability (0.0001 g)
90 MECHANICAL- Mass 0.500 g 0.09 mg Standard Weights E2
WEIGHTS Class and 200 g
weighing Balance with
readability (0.001 g)
91 MECHANICAL- Mass 1g 0.11 mg Standard Weights E2
WEIGHTS Class and 200 g
weighing Balance with
readability (0.0001 g)
92 MECHANICAL- Mass 1 kg 10 mg Standard Weights E2
WEIGHTS Class and 3 kg
weighing Balance with
 readability (0.01 g)
93 MECHANICAL- Mass 10 g 0.08 mg Standard Weights E2
WEIGHTS Class and 200 g
weighing Balance with
readability (0.0001 g)
94 MECHANICAL- Mass 10 kg 0.88 g Standard Weights E2
WEIGHTS Class and 30 kg
weighing Balance with
readability (1 g)
95 MECHANICAL- Mass 100 g 0.15 mg Standard Weights E2
WEIGHTS Class and 200 g
weighing Balance with
readability (0.0001 g)
96 MECHANICAL- Mass 2g 0.09 mg Standard Weights E2
WEIGHTS Class and 200 g
weighing Balance with
readability (0.001 g)
97 MECHANICAL- Mass 2 kg 14 mg Standard Weights E2
WEIGHTS Class and 3 kg
weighing Balance with
readability (0.01 g)
98 MECHANICAL- Mass 20 g 0.15 mg Standard Weights E2
WEIGHTS Class and 200 g
weighing Balance with
readability (0.0001 g)
99 MECHANICAL- Mass 20 kg 0.95 g Standard Weights E2
WEIGHTS Class and 30 kg
weighing Balance with
100 MECHANICAL- Mass 200 g 0.16 mg Standard Weights E2
WEIGHTS Class and 200 g
weighing Balance with
101 MECHANICAL- Mass 5g 0.09 mg readability (0.0001 E2
Standard Weights g)
WEIGHTS Class and 200 g
weighing Balance with
102 MECHANICAL- Mass 5 kg 1.00 g readability (0.0001 E2
Standard Weights g)
WEIGHTS Class and 5 kg weighing
103 MECHANICAL- Mass 50 g 0.10 mg Balance with
Standard readability
Weights E2
WEIGHTS Class and 200 g
weighing Balance with
104 MECHANICAL- Mass 500 g 0.01 g readabilityWeights
Standard (0.001 g)
E2
WEIGHTS Class and 3 kg weighing
105 THERMAL- RTD'S 50 ºC to 250 ºC 0.82ºC Balance
Using with
RTD readability
Sensor with
TEMPERATURE Thermocouple's Indicator, Oil bath
with or without
Temperature
/ Controller,
Temperature
Transmitter, Glass
Thermometer,
etc.
106 THERMAL- Thermocouple's 250 ºC to 650 ºC 4.4 ºC Using S Type
TEMPERATURE with or without Thermocouple with
Temperature Indicator, Dry Block
Indicator / Recorder Calibrator
/ Data Logger /
107 THERMAL- Thermocouple's 650 ºC to 1200 ºC 4.56 ºC Using S Type
TEMPERATURE with or without Thermocouple, Dry Block
Temperature Calibrator
Indicator / Recorder
108 ELECTRO- /AC
Data Logger /
Current 200 mA to 9 A 0.5% to 0.6% Using DMM
TECHNICAL-
ALTERNATING
CURRENT (< 1 GHZ)
(Measure)
109 ELECTRO- AC Current 5 mA to 200 mA 0.4% to 0.5% Using DMM
TECHNICAL-
ALTERNATING
CURRENT (< 1 GHZ)
(Measure)
110 ELECTRO- AC High Voltage 2 KV to 40 KV 13% High Voltage Probe with
TECHNICAL- DMM
ALTERNATING
CURRENT (< 1 GHZ)
(Measure)
111 ELECTRO- AC Voltage @50Hz 50mV to 900V 0.4% to 0.3% Using DMM
TECHNICAL-
ALTERNATING
CURRENT (< 1 GHZ)
(Measure)
112 ELECTRO- Frequency 50 Hz to 1 kHz 1.2% to 0.7% Using DMM
TECHNICAL-
ALTERNATING
CURRENT (< 1 GHZ)
(Measure)
113 ELECTRO- AC Current @50Hz 10 A to 900 A 2.8% to 1.0% Multi-function Calibrator
TECHNICAL- with Current Coil
ALTERNATING
CURRENT (< 1 GHZ)
(Source)
114 ELECTRO- AC Current @50Hz 20 mA to 10 A 0.5% to 0.4% Multi-function Calibrator
TECHNICAL-
ALTERNATING
CURRENT (< 1 GHZ)
(Source)
115 ELECTRO- AC Current @50Hz 200 µA to 20 mA 0.4% to 0.5% Multi-function Calibrator
TECHNICAL-
ALTERNATING
CURRENT (< 1 GHZ)
(Source)
116 ELECTRO- AC Voltage @50Hz 5 mV to 1000 V 1.1% to 0.2% Multi-function Calibrator
TECHNICAL-
ALTERNATING
CURRENT (< 1 GHZ)
(Source)
117 ELECTRO- Frequency 50 Hz to 1 KHz 1.2% to 0.2% Multi-function Calibrator
TECHNICAL-
ALTERNATING
CURRENT (< 1 GHZ)
(Source)
118 ELECTRO- DC Current 5 mA to 9A 1.20% Using DMM
TECHNICAL- DIRECT

CURRENT (Measure)
119 ELECTRO- DC High Voltage 2 KV to 12 KV 7% to 9% High Voltage Probe with
TECHNICAL- DIRECT DMM

CURRENT (Measure)
120 ELECTRO- DC Voltage 2 mV to 900 V 0.4% to 0.14% Using DMM
TECHNICAL- DIRECT

CURRENT (Measure)
121 ELECTRO- Resistance (2 Wire) 10 M Ohm to 50 M 0.2% to 2.4% Using DMM
TECHNICAL- DIRECT Ohm

CURRENT (Measure)
122 ELECTRO- Resistance (2 Wire) 50 Ohm to 10 M 0.5% to 0.2% Using DMM
TECHNICAL- DIRECT Ohm

CURRENT (Measure)
123 ELECTRO- DC Current 10 A to 900 A 3.30% Multi-function Calibrator
TECHNICAL- DIRECT with Current Coil

CURRENT (Source)
124 ELECTRO- DC Current 2 A to 10 A 0.5 % to 1% Multi-function Calibrator
TECHNICAL- DIRECT

CURRENT (Source)
125 ELECTRO- DC Current 200 µA to 2 A 0.3 % to 0.5% Multi-function Calibrator
TECHNICAL- DIRECT

CURRENT (Source)
126 ELECTRO- DC Voltage 2 mV to 1000 V 0.6% to 1.0% Multi-function Calibrator
TECHNICAL- DIRECT

CURRENT (Source)
127 ELECTRO- Resistance 1 Ohm to 10 M 0.8% to 0.2% Decade Resistance Box
TECHNICAL- DIRECT Ohm

CURRENT (Source)
128 ELECTRO- Resistance 10 M Ohm to 1000 0.2% to 2.4% Decade Resistance Box
TECHNICAL- DIRECT M Ohm

CURRENT (Source)
129 ELECTRO- J Type 500ºC to 1200ºC 2ºC Handy calibrator
TECHNICAL- Thermocouple
TEMPERATURE
SIMULATION
(Measure)
130 ELECTRO- J Type -60ºC to 500ºC 2ºC Handy calibrator
TECHNICAL- Thermocouple
TEMPERATURE
SIMULATION
(Measure)
131 ELECTRO- K Type 600ºC to 1350ºC 3ºC Handy calibrator
TECHNICAL- Thermocouple
TEMPERATURE
SIMULATION
(Measure)
132 ELECTRO- K Type -60ºC to <600ºC 2ºC Handy Calibrator
TECHNICAL- Thermocouple
TEMPERATURE
SIMULATION
(Measure)
133 ELECTRO- R Type 50ºC to 1700 4ºC Handy calibrator
TECHNICAL- Thermocouple
TEMPERATURE
SIMULATION
(Measure)
134 ELECTRO- RTD (PT-100) -60ºC to 800ºC 1ºC Handy calibrator
TECHNICAL-
TEMPERATURE
SIMULATION
(Measure)
135 ELECTRO- S Type 50ºC to 1700ºC 4ºC Handy Calibrator
TECHNICAL- Thermocouple
TEMPERATURE
SIMULATION
(Measure)
136 ELECTRO- J Type 500 to 1200º C 2ºC Handy calibrator
TECHNICAL- Thermocouple
TEMPERATURE
SIMULATION (Source)

137 ELECTRO- J Type -60ºC to 500ºC 1 ºC Handy calibrator

TECHNICAL- Thermocouple
TEMPERATURE
SIMULATION (Source)

138 ELECTRO- K Type -60 ºC to <600 ºC 1 ºC Handy calibrator

TECHNICAL- Thermocouple
TEMPERATURE
SIMULATION (Source)

139 ELECTRO- K Type 600 ºC to 1350ºC 2 ºC Handy calibrator

TECHNICAL- Thermocouple
TEMPERATURE
SIMULATION (Source)

140 ELECTRO- R Type 50º C to 1700 ºC 4 ºC Handy calibrator

TECHNICAL- Thermocouple
TEMPERATURE
SIMULATION (Source)

141 ELECTRO- RTD (PT-100) -60 ºC to 800 ºC 1 °C Handy calibrator

TECHNICAL-
TEMPERATURE
SIMULATION (Source)

142 ELECTRO- S Type 50ºC to 1700ºC 4 ºC Handy calibrator

TECHNICAL- Thermocouple
TEMPERATURE
SIMULATION (Source)

143 ELECTRO- Stop Watch 10 sec to 24h 1.3sec to 21sec. Digital Stop Watch
TECHNICAL- TIME &
FREQUENCY
(Measure)
144 MECHANICAL- Test Sieve 10 mm to 125 mm 75 µm Digital caliper
DIMENSION (BASIC
MEASURING
INSTRUMENT,
GAUGE ETC.)
145 MECHANICAL- Brinell 95.5 HBW 10/3000 2.50% Standard Test Block
HARDNESS TESTING to 653 HBW
MACHINES 10/3000
146 MECHANICAL- Brinell 95.5 HBW 5/750 to 2.50% Standard Test Blocks
HARDNESS TESTING 653 HBW 5/750
MACHINES
147 MECHANICAL- Rockwell 20 HRA to 88 HRA 1.00 HRA Standard Test Blocks
HARDNESS TESTING
MACHINES
148 MECHANICAL- Rockwell 20 HRBW to 100 1.00 HRBW Standard Test Blocks
HARDNESS TESTING HRBW
MACHINES
149 MECHANICAL- Rockwell 20 HRC to 70 HRC 1.00 HRC Standard Test Block
HARDNESS TESTING
MACHINES
150 MECHANICAL- Pressure 0 to 19.6 mbar 0.05 mbar Using Digital Pressure
PRESSURE Gauge
INDICATING
DEVICES
151 MECHANICAL- Pressure 0 to 7 bar 0.05 bar Using Digital Pressure
PRESSURE Gauge
INDICATING
DEVICES
152 MECHANICAL- Pressure 0 to 70 bar 0.55 bar Using Digital Pressure
PRESSURE Gauge
INDICATING
DEVICES
153 MECHANICAL- Pressure 0 to 700 bar 1.15 bar Using Digital Pressure
PRESSURE Gauge
INDICATING
DEVICES
154 MECHANICAL- Pressure 0 to 980 bar 2.7 bar Using Digital Pressure
PRESSURE Gauge
INDICATING
DEVICES
155 MECHANICAL- UTM, Uniaxial Testing 4 kN to 2000 kN 0.50% Force Proving
TENSION CREEP Machines Instruments as per IS
AND TORSION (Compression) 1828-1 2015
TESTING MACHINE
156 MECHANICAL- UTM, Uniaxial Testing 100 N to 50 kN 0.50% Force Proving
TENSION CREEP Machines (Tension) Instruments and Load
AND TORSION Cell as per IS 1828-
TESTING MACHINE 1:2015
157 MECHANICAL- Weighing Balance 0 to 210 g 0.001 g Using Standard Weights
WEIGHING SCALE E2 with d=0.1 mg,
AND BALANCE Calibration of Weighing
balance class II and
Coarser
158 MECHANICAL- Weighing Balance 210 g to 600 g 0.20 g Using Standard Weights
WEIGHING SCALE E2 with d=10 mg,
AND BALANCE Calibration of Weighing
balance class II and
Coarser
159 MECHANICAL- Weighing Balance 3 kg to 30 kg 0.95 g Using Standard Weights
WEIGHING SCALE E2 with d=1 g,
AND BALANCE Calibration of Weighing
balance class II and
Coarser
160 MECHANICAL- Weighing Balance 600 g to 3 kg 0.58 g Using Standard Weights
WEIGHING SCALE E2 with d=10 mg,
AND BALANCE Calibration of Weighing
balance class II and
Coarser
161 THERMAL- RTD'S 50 ºC to 250 ºC 0.82ºC Using RTD Sensor with
TEMPERATURE Thermocouple's Indicator, Oil bath
with or without
Temperature
Indicator / Recorder
/ Data Logger

/ Controller,
Temperature
Transmitter, Glass
Thermometer,
etc.
162 THERMAL- Temperature 250 ºC to 1200º C 4.55º C S Type Thermocouple
TEMPERATURE Indicator with with Indicator
Sensor of Oven,
Bath, Furnace, Auto
clave & Chamber
etc.
163 THERMAL- Temperature 50 ºC to 250º C 0.82º C RTD Sensor with
TEMPERATURE Indicator with Indicator
Sensor of Oven,
Bath, Furnace, Auto
clave & Chamber
etc.
164 THERMAL- Thermocouple's 250 ºC to 650 ºC 4.4 ºC Using S Type
TEMPERATURE with or without Thermocouple with
Temperature Indicator, Dry Block
Indicator / Recorder Calibrator
/ Data Logger /
Controller,
Temperature
Transmitter,
Temperature
Gauge etc.
165 THERMAL- Thermocouple's 650 ºC to 1200 ºC 4.56 ºC Using S Type
TEMPERATURE with or without Thermocouple, Dry Block
Temperature Calibrator
Indicator / Recorder
/ Data Logger /
Controller,
Temperature
Transmitter,
Temperature
Gauge etc.