IJIREEICE ISSN (O) 2321-2004, ISSN (P) 2321-5526
International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering
Impact Factor 7.047Vol. 10, Issue x, Month 2022
DOI 10.17148/IJIREEICE.2022.10x
Title of Research Paper
Author1, Author2, Author3
Designation, Department, College, City, Country1
Designation, Department, College, City, Country2
Designation, Department, College, City, Country3
Abstract: This document gives formatting instructions for authors preparing papers for publication in the Proceedings
of an International Journal. The authors must follow the instructions given in the document for the papers to be
published. You can use this document as both an instruction set and as a template into which you can type your own
text.
Keywords: Include at least 4 keywords or phrases.
I. INTRODUCTION
This document is a template. An electronic copy can be downloaded from the conference website. For questions on
paper guidelines, please contact the conference publications committee as indicated on the conference website.
Information about final paper submission is available from the conference website.
II. PAGE LAYOUT
An easy way to comply with the conference paper formatting requirements is to use this document as a template and
simply type your text into it.
A. Page Layout
Your paper must use a page size corresponding to A4 which is 210mm (8.27") wide and 297mm (11.69") long. The
margins must be set as follows:
Top = 20.32mm (0.8")
Bottom = 20.32mm (0.8")
Left = Right = 20.32mm (0.8")
III.PAGE STYLE
All paragraphs must be indented. All paragraphs must be justified, i.e. both left-justified and right-justified.
A. Text Font of Entire Document
The entire document should be in Times New Roman. Type 3 fonts must not be used. Other font types may be used if
needed for special purposes.
Recommended font sizes are shown in Table 1.
B. Title and Author Details
Title must be in 24 pt Regular font. Author name must be in 11 pt Regular font. Author affiliation must be in 10 pt.
All title and author details must be in single-column format and must be centered. Every word in a title must be
capitalized except for short minor words such as “a”, “an”, “and”, “as”, “at”, “by”, “for”, “from”, “if”, “in”, “into”,
“on”, “or”, “of”, “the”, “to”, “with”. Author details must not show any professional title (e.g. Managing Director), any
academic title (e.g. Dr.) or any membership of any professional organization (e.g. Senior Member IEEE).
To avoid confusion, the family name must be written as the last part of each author name (e.g. John A.K. Smith). Each
affiliation must include, at the very least, the name of the company and the name of the country where the author is
based (e.g. Causal Productions Pty Ltd, Australia).
C. Section Headings
No more than 3 levels of headings should be used. All headings must be in 10pt font. Every word in a heading must
be capitalized except for short minor words as listed in Section III-B.
© IJIREEICE This work is licensed under a Creative Commons Attribution 4.0 International License 1
IJIREEICE ISSN (O) 2321-2004, ISSN (P) 2321-5526
International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering
Impact Factor 7.047Vol. 10, Issue x, Month 2022
DOI 10.17148/IJIREEICE.2022.10x
Level-1 Heading: A level-1 heading must be in Small Caps, centered and numbered using uppercase Roman numerals.
For example, see heading “III. Page Style” of this document. The two level-1 headings which must not be numbered
are “Acknowledgment” and “References”.
Level-2 Heading: A level-2 heading must be in Italic, left-justified and numbered using an uppercase alphabetic letter
followed by a period. For example, see heading “C. Section Headings” above.
Level-3 Heading: A level-3 heading must be indented, in Italic and numbered with an Arabic numeral followed by a
right parenthesis. The level-3 heading must end with a colon.
D. Figures and Table
Figures and tables must be centered in the column. Graphics must not use stipple fill patterns because they may not be
reproduced properly. Please use only SOLID FILL colors which contrast well both on screen and on a black-and-white
hardcopy, as shown in Fig. 1.
Figure Captions
Figures must be numbered using Arabic numerals. Figure captions must be in 10 pt Regular font. Captions of a single
line must be centered whereas multi-line captions must be justified. Captions with figure numbers must be placed after
their associated figures, as shown in Fig. 1.
Fig. 1 A sample figure
Table Captions
Tables must be numbered using uppercase Roman numerals. Table captions must be centred and in 10 pt. Captions
with table numbers must be placed before their associated tables, as shown in Table 1.
TABLE I FONT SIZES FOR PAPERS
Font Appearance (in Time New Roman or Times)
Size Regular Bold Italic
10 table caption (in Small Caps), figure caption
10 reference item reference item (partial)
10 author address (in Courier), cell in a table abstract body abstract heading (also in Bold)
10 level-1 heading (in Small Caps), paragraph level-2 heading, level-3 heading,
author affiliation
12 author name
24 title
© IJIREEICE This work is licensed under a Creative Commons Attribution 4.0 International License 2
IJIREEICE ISSN (O) 2321-2004, ISSN (P) 2321-5526
International Journal of Innovative Research in Electrical, Electronics, Instrumentation and Control Engineering
Impact Factor 7.047Vol. 10, Issue x, Month 2022
DOI 10.17148/IJIREEICE.2022.10x
E. Page Numbers, Headers and Footers
Page numbers, headers and footers must not be used.
F. Links and Bookmarks
All hypertext links and section bookmarks will be removed from papers during the processing of papers for publication.
G. References
The heading of the References section must not be numbered. All reference items must be in 8 pt font. Please use
Regular and Italic styles to distinguish different fields as shown in the References section. Number the reference items
consecutively in square brackets (e.g. [1]). When referring to a reference item, please simply use the reference number,
as in [2].
Examples of reference items of different categories shown in the References section include:
example of a book in [1]
example of a book in a series in [2]
example of a journal article in [3]
example of a conference paper in [4]
example of a patent in [5]
example of a website in [6]
example of a web page in [7]
example of a databook as a manual in [8]
example of a datasheet in [9]
example of a master’s thesis in [10]
IV.CONCLUSION
The version of this template is V2. Most of the formatting instructions in this document have been compiled by Causal
Productions from the IEEE LaTeX style files. Causal Productions offers both A4 templates and US Letter templates
for LaTeX and Microsoft Word. The LaTeX templates depend on the official IEEEtran.cls and IEEEtran.bst files,
whereas the Microsoft Word templates are self-contained.
ACKNOWLEDGMENT <Optional>
The heading of the Acknowledgment section and the References section must not be numbered. Causal Productions
wishes to acknowledge Michael Shell and other contributors for developing and maintaining the IEEE LaTeX style
files which have been used in the preparation of this template.
REFERENCES
[1]. S. M. Metev and V. P. Veiko, Laser Assisted Microtechnology, 2nd ed., R. M. Osgood, Jr., Ed. Berlin, Germany:
Springer-Verlag, 1998.
[2]. J. Breckling, Ed., The Analysis of Directional Time Series: Applications to Wind Speed and Direction, ser.
Lecture Notes in Statistics. Berlin, Germany: Springer, 1989, vol. 61.
[3]. S. Zhang, C. Zhu, J. K. O. Sin, and P. K. T. Mok, “A novel ultrathin elevated channel low-temperature poly-Si
TFT,” IEEE Electron Device Lett., vol. 20, pp. 569–571, Nov. 1999.
[4]. M. Wegmuller, J. P. von der Weid, P. Oberson, and N. Gisin, “High resolution fiber distributed measurements with
coherent OFDR,” in Proc. ECOC’00, 2000, paper 11.3.4, p. 109.
[5]. R. E. Sorace, V. S. Reinhardt, and S. A. Vaughn, “High-speed digital-to-RF converter,” U.S. Patent 5 668 842,
Sept. 16, 1997.
[6]. (2002) The IEEE website. [Online]. Available: http://www.ieee.org/
BIOGRAPHY <Optional>
Authors have the option to publish a biography together with the paper, with the academic qualification,
past and present positions, research interests, awards, etc. This increases the profile of the authors and is
well received by international reader.
© IJIREEICE This work is licensed under a Creative Commons Attribution 4.0 International License 3
