l.a.
paperart
DONALD TRUMP
Required Materials A Special Note About Printing
- Printer This mask is designed to be printed on
- A4 or US letter size printer paper US Letter paper (8 1/2" x 11") or Euro-
- Thick paper or thin cardboard pean A4 paper (210mm x 297mm) .
- Spray adhesive or a glue stick
- Scissors Make sure that the "print to scale"
- Craft knife option is blank/not checked on your
- Clear tape OR fast-drying wood glue printer settings to ensure that the
- Thick sewing needle or blunt knife pages print at the intended size.
and a ruler to score the folds
You can check the scale by measuring
the printed line on the first pattern
page with a ruler.
PAGE 1/21
Instructions for
Printing and Folding
Print on thin Paper and adhere the mask pieces to cardboard. This method
will result in the printed lines and pattern guide numbers being hidden on the
inside of the finished mask.
(1) Print your mask pieces on plain (4) Using a thick sewing needle or
printer paper. blunt knife and a ruler, score along the
folding lines.
(2) Glue the mask pieces to the back
of your cardboard. We recommend (5) Refer to the diagram below and fold
using spray adhesive or a glue stick as along the creases either bringing the
other types of glue may make the two edges towards you (Valley Fold)
paper too wet. for the plain dashed line folds or away
from you (Mountain Fold) for the dot/-
(3) Cut out the pattern pieces along dashed line folds.
the solid cutting lines.
(6) Proceed to Assembly Instructions
Note: the dashed lines are folding section.
lines, make sure not to cut them!
IMPORTANT
Mountain fold line Valley fold line
Cut line Glue flap
PAGE 2/21
Mask Assembly Instructions
Assembly
(8) After completing the mask you can
(7) Each number on the mask pattern optionally assemble our fitting band on
has a twin. Find the matching numbers the final page. Tape it to the inside to
and attach the two pieces together. get an optimal fit for your mask.
We recommend using one of the Note: Halfmasks don’t require a
following methods for attaching the fitting band
mask pieces together.
(9) Let your creativity flow. You can
decorate and color your mask
anyway you like.
Option 1 / Easy
Clear Adhesive Tape
Place a piece of tape on the outside of
the pattern covering the joint where
the two edges meet. Tape all pieces
together.
pro: easy and fast!
con: tape is visible from the outside Have fun
we love to sEe yoUr crEatioNs.
taG youR phoTos wIth tHe haShtag
#LapasTudios
Option 2 / Advanced
Glue And sHare Them With us
Although it is a bit more tricky than
On faCebooK or InstaGram
using tape, we recommend using a
fast-drying wood glue to adhere the
mask pieces. The glue should dry clear. wWw.FaceboOk.cOm/LapasTudioS
Stick all pieces together. InstaGram >>> @LapasTudioS
Note: You could also use a glue stick
to attach the pieces together, but the yoU havE queStions?
finished mask may be less durable.
ConTact uS
pro: invisible! maIl@LapasTudios.coM
con: time consuming
PAGE 3/21
trUmp cOlors
hair p.13-21
eyes p.5
face p.6-12
AssemBle tHe faCe firsT
ContiNue wIth tHe haiR
PAGE 4/21
4” (100mm)
67
66
70
7
53
4
8 5
61 glue
63 TogetheR
60
gluE flapS
7
8
4
Eyes
71
65
74
14
52
16
12
13
15
57
glue 56 59
TogetheR
14
12 16
PAGE 5/21
Face
19
59
85
56
57
13
58
glue
50
65
TogetheR
54
73
54
52
50
64
51
55
53
69
55
glue
TogetheR
51
66
62
61
60
87
63
78
PAGE 6/21
Face
97
10
4 103
92 91
92
glue 91 glue
TogetheR TogetheR
95
96
93
94
94
glue 93
w w w. l a p a s t u d i o s . c o m
glue
TogetheR TogetheR
10
8
10
7
PAGE 7/21
Face
85
84
58
89
83
81
glue
TogetheR
79
0
10
79
64
98
80
2
10
80
glue
TogetheR 86
82
90
62
88
87
PAGE 8/21
Face
102 100
10 98
1
99
glue glue
TogetheR TogetheR
10
1
99
97
82
81
103
104
86
83
96
95
106
105
10
7 8
10
PAGE 9/21
Face
18
15
17
19
84
20
89
10
5
PAGE 10/21
Face
75
76
6
78
88
1
77
90
6
10
PAGE 11/21
Face
75 18
70
74
72
68
67
71
69
73
Ears
11
3
10
2
Both Sides
1 9
PAGE 12/21
Hair
24
21
29
68
23
72
28
22
25
PAGE 13/21
23
Hair
28
29
26
27
40
PAGE 14/21
Hair
42
38
33
32
31
26
22
25
PAGE 15/21
Hair
glue
TogetheR
31
30
30
32
17
33
11
10
49
20
46
PAGE 16/21
Hair
glue
TogetheR 36
35
35
34
76
37
2
48
77
47
PAGE 17/21
Hair
44
39
37
34
36
27
21
24
PAGE 18/21
Hair
49
43
46
41
47
45
48
PAGE 19/21
Hair
42
43
38
41
40
39
45
44
PAGE 20/21
The Fitting Band
The fitting band for your mask will be made from strips of
cardboard paper and can be adjusted to get a good fit.
(1) Cut 3 strips of A4/US letter paper. (4) Tape the ends closed to make one
Each strip should measure 1.5" continuous loop of paper.
wide (40mm) and the length will be
the full length of the page. (5) Cut out 2 rectangles from the sheet
of paper, each one should measure
(2) Stick the short ends of the strips 1.5" x 4” (40mm x 100mm).
together with tape to make one
long strip of paper. (6) Tape one rectangle on either side
of the band (see drawing below).
(3) Wrap the long strip around your
head, overlapping the ends; make (7) Place the fitting band inside of the
sure that the resulting band is a mask and tape it to the back of
snug fit. the mask.
CutouT arRange
A4 papeR / us leTter papeR
1.5”/40mM
1.5”/40mM
1.5”/40mM
1.5”/40mM
stapLe, tape or gLue tOgetheR
4”/100mM
PAGE 21/21
