Scribd
Upload
4K views2 pages

Pidilite Industries Limited: Technical Data Sheet Fevicol Heatx

FEVICOL Heatx is a synthetic rubber-based adhesive made for heat resistance up to 170 degrees Celsius. It has excellent heat resistance and quick grab properties without springback on curved surfaces, making it suitable for vertical applications. FEVICOL Heatx is used in furniture manufacturing for bonding laminate to wood and PVC laminate. It dries within 4-6 minutes at room temperature and fully bonds materials within 24 hours. The adhesive has a greenish yellow liquid appearance, viscosity of 23-30 poise, and specific gravity of 0.86.

Uploaded by

Paras Agrawal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4K views2 pages

Pidilite Industries Limited: Technical Data Sheet Fevicol Heatx

FEVICOL Heatx is a synthetic rubber-based adhesive made for heat resistance up to 170 degrees Celsius. It has excellent heat resistance and quick grab properties without springback on curved surfaces, making it suitable for vertical applications. FEVICOL Heatx is used in furniture manufacturing for bonding laminate to wood and PVC laminate. It dries within 4-6 minutes at room temperature and fully bonds materials within 24 hours. The adhesive has a greenish yellow liquid appearance, viscosity of 23-30 poise, and specific gravity of 0.86.

Uploaded by

Paras Agrawal
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 2

PIDILITE INDUSTRIES LIMITED

Marketing Division: P.B. No. 17411, Andheri (East), Mumbai 400 059 (India)

TECHNICAL DATA SHEET

FEVICOL HEATX
FOR INFORMATION ONLY
PRODUCT : FEVICOL Heatx is a synthetic solvent borne rubber based adhesive made with a
special formula for having excellent heat resistance property upto 170 Deg. C temperature.
Fevicol Heatx is having Excellent heat resistance & Quick grab property without spring back
action on curved surface, and this property will helpful in vertical applications.

USE: FEVICOL HEATX is used in furniture industry for


bonding Laminate to Wood, PVC Laminate to Laminate,

APPLICATION METHOD : -- Surface to be bonded should be dry, clean, and leveled


-- Stir the adhesive properly before use
-- Apply the adhesive first on non porous surface and then
on porous surface
-- Allow a minimum drying time of approx 4-6 minutes at
room temperature and bond the surfaces carefully so
that the alignment is as required
-- Give appropriate pressure
-- final bond is achieved in 24 hrs

TYPICAL CHARACTERISTICS :

1.Appearance : Greenish Yellow Liquid


2.Viscosity @ 30° c : 23 – 30 poise
3.Specific Gravity : 0.86 ± 0.01
4.Diluent : Toluene
5.Flammability : Highly Flammable
6.Flash Point : 0° C to 4° C
SPECIAL FEATURES : Faster setting. Heatproof at high temperatures,
Suitable for Vertical applications, Free from Benzene.

STORAGE : Store under dry condition. Keep the tin away from heat
and direct sunlight and naked flame. Close the lid tightly
after taking out the material from container

SHELF LIFE :18 months from the date of manufacturing under proper
storage

PACKING : 1Ltr. & 5 Ltrs. tin

MATERIAL SAFETY DATA :

1.Hazardous ingredients : Aromatic Solvents, Aliphatic hydrocarbons, Esters


2.Flash Point : 0° C to 4° C
3.Flammability : Flammable when exposed to heat or flame.
4.Protective Clothing : Wear suitable protective clothing, Rubber gloves and eye
protective while handling.

NOTE : We recommend that before using our product , the customer should make his own test
to determine the suitability of the product for his own purpose under his operating conditions.
As the circumstances under which our product is stored, handled and used , are beyond our
control. We can not assume any responsibility of their use by the customer.

You might also like