Scribd
Upload
4K views5 pages

Continental Gpec2 Pinout

The document provides instructions for connecting to a Continental GPEC2 ECU using cable F32GN037C/D. Specifically, it states that the red and orange wires from the cable can both be connected to the +12V power pins on the ECU connector. It also indicates that the blue and grey wires from the cable should be connected to the BOOT&CNF1 pins on the ECU for initialization and programming.

Uploaded by

Fabricio Goulart
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
4K views5 pages

Continental Gpec2 Pinout

The document provides instructions for connecting to a Continental GPEC2 ECU using cable F32GN037C/D. Specifically, it states that the red and orange wires from the cable can both be connected to the +12V power pins on the ECU connector. It also indicates that the blue and grey wires from the cable should be connected to the BOOT&CNF1 pins on the ECU for initialization and programming.

Uploaded by

Fabricio Goulart
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 5

CONTINENTAL GPEC2 BAM FCA

plugin 1025
CONTINENTAL GPEC2 BAM FCA
CONTINENTAL GPEC2 BAM FCA
CONTINENTAL GPEC2 BAM FCA

DIRECT CONNECTION
In order to connect to the ECU use the cable F32GN037C/D.
Make sure that the POWER led (red) on Trasdata is ON.

ECU CONNECTOR

To the power feeding pins 23,75,96 (+12V) you can connect both wires red (VECU) and orange
(VKEY) of the F32GN037C/D cable, they both have 12V signal.
CONTINENTAL GPEC2 BAM FCA

BOOT&CNF1 CONNECTION
Connect the BLUE&GREY wires of the cable F32GN037C/D as described here below:

You might also like