LO O K B O O K

CO NTAC T
www.bradleycollection.com UK & REST OF THE WORLD USA & CANADA
THE BRADLEY
􀌾 +44 (0)1449 722 724
􀈟 info@bradleycollection.com
􀌾 +1 (310) 815 8255
􀈟 info.us@bradleycollection.com
8 COLLECTION

thebradleycollection
Specialised fixings for mounting brackets will be required in certain situations and are not provided as standard. Steel items are not recommended for damp conditions such as shower rooms.
Crystal finials and acrylic poles should not be positioned in direct sunlight, and are not suitable for use in conservatories. Brass items are supplied unlacquered and will tarnish over time.

The Bradley Collection reserves the right to modify design and materials without prior notice as part of a process of continual product improvement.
Due to printing limitations, colours in this brochure may not be accurate.

Products are protected by Design Rights, under provisions of Copyright, Designs & Patents Act 1988.
Bradley®, The Bradley Collection® and Logo are registered Community trademarks of The Bradley Collection Ltd. in Europe and registered trademarks of the Bradley Collection, Inc. in the USA. ED IT IO N 8
The Bradley Collection Ltd Lion Barn • Maitland Road • Needham Market • Suffolk • IP6 8NS • UK
21 | 22
Printed: 0821 • Copyright © The Bradley Collection Ltd. 2021
 THE BRADLEY
8 COLLECTION

I N SP IR ING
Take a wander through our Look Book, to see some
inspirational schemes from our clients around the
world. All created using our unrivalled finish palette.

Then pause to enjoy a pivotal moment for high end

curtain poles as luxur y Fluid Metal finishes are unveiled.

This is truly transformative, as authentic real metal

coatings may now be applied to any base material.

The creative opportunities are limitless.

LOOK BOOK GLIDERPOLE STEEL MIO ELYSIAN CONTOUR | ECLIPSE

Page:93-110
CONTOUR
Page:1-24 Page:25-38 Page:39-52 Page:53-68 Page:69-82 Page:83-92
Pictured: 50mm (2”) Ribbed Ball • Bronze Art
 LO O K B O O K
GLIDERPOLE
Pictured: Round Ø 50mm (2”) Gliderpole ® - Hand Drawn • Squat Globe • Pewter - Gloss
Interior design: Susan Clark Interiors - UK www.susanclarkinteriors.com
Photography: Chris Snook • @snookphotography - www.chrissnookphotography.co.uk

1 2
 LO O K B O O K
STEEL
Pictured: Ø 25mm (1”) Pole • Button Stud • Waxed
Interior design: Tanya Leech - BIID Interior Designer
Photography: Anya Rice

3 4
 LO O K B O O K
S OFT FOC US
Stunning angles are enhanced by sharp lines of hardware
but then are dressed softly with fine, fluid drapes.

A tranquil place.

GLIDERPOLE
Pictured: Round Ø 30mm (1 3/ 16”) Gliderpole ® - Hand Drawn • End Cap • Millstone - Matte
Interior design: Jim Davis Designs - USA www.jimdavisdesigns.com

5 6
 LO O K B O O K
GLIDERPOLE
Pictured: Round Ø 50mm (2”) Gliderpole ® - Hand Drawn • Halo • Champagne - Satin
Window treatments: Bryant Furnishing - Bournemouth - UK
Photography: Harbour View Photography

7 8
 LO O K B O O K
| ECLIPSE
Pictured: Ø 38mm (1 1/ 2”) Coverpole • Standard Stud • Brass Toned

Project by: Gallagher London - London SW7 - UK

9 10
 LO O K B O O K
GLIDERPOLE
Pictured: Round Ø 30mm (1 3/ 16”) Gliderpole ® - Hand Drawn • Charm • Gold - Gloss
Interior design: EMR Architecture - London - UK
Curtain design: Ma Maison Design • @ma_maison_design - London - UK

11 12
 LO O K B O O K
T O N AL
Carefully layered colours create harmony and calm.

A gorgeous bay window becomes a haven; a place to live.

The curtain pole is subtle and perfectly understated.

MIO
Pictured: Ø 38mm (1 1/ 2”) • Disc • Barley - Matte
Curtain design: Village Blinds • @villageblindslondon - London - UK
Photography: Chris Snook • @snookphotography - www.chrissnookphotography.co.uk

13 14
 LO O K B O O K
GLIDERPOLE
Pictured: Round Ø 50mm (2”) - Round Ø 30mm (1 3/ 16”) Gliderpole ® - Hand Drawn • Flush Stud • Gunmetal - Satin
Rocco Forte • The Balmoral - Glamis Suite

15 16
 LO O K B O O K
M I NIM AL
A perimeter of glass bringing the outside in.

A symbiosis.

But we still need cool in the heat, warmth in the winter

and privacy all year round.

GLIDERPOLE
Pictured: Flat H 36mm (1 7/ 16”) Gliderpole ® - Hand Drawn • Flush End Cap • Bone - Satin
Curtain design: Erik Bruce • @erikbrucestudio - New York - USA

17 18
 LO O K B O O K
MIO
Pictured: Ø 25mm (1”) Pole • Brushed Stainless
Curtain design: Erik Bruce • @erikbrucestudio - New York - USA
Design/Architect: Steven Learner Studio
Photography: Tom Powel

19 20
 LO O K B O O K
GLIDERPOLE
Pictured: Round Ø 30mm (1 3/ 16”) Gliderpole - Hand Drawn • Flush Stud • Flint - Satin
Interior Design: Pelham Design
Soft Furnishings: SZH Interiors

21 22
 LO O K B O O K
E L E G A N T CU R V E S
Stunning architectural details sometimes present challenges.

Here, perfectly curved hardware has been created to accentuate

the elegant curves of the room, whilst allowing the light to flood in.

STEEL
Pictured: Ø 25mm (1”) Pole • Pebble • Brass Toned
Designer: Katie Sloan Interiors, Edinburgh - UK

23 24
 ®

GLIDERPOLE®
GLIDERPOLE
This sophisticated collection is the epitome of modern living.
The design is sharp, streamlined and purposeful, whilst the
choice of colour and finish ensures a truly individual result.

Pictured: Round Ø 50mm (2”) Gliderpole ® - Corded • Flush End Cap • Gold - Gloss
Interior styling & decoration: Dilly Orme @dillyorme
Photography: David Parmiter @davidparmiterphotography

25 26
 GL I D E RP O L E ® L E N GT H
Gliderpole can be supplied to any length ↔ allowing the curtains
WAV E ®
The ubiquitous Wave ® heading is accommodated through
to travel freely across even the longest systems. all Gliderpole options.

GLIDERPOLE®
HA ND DRAWN C O RD ED
The smooth running hand drawn option is available in four styles; The innovative, embedded cording solution is available in three
Square • Flat • Ø30mm (1 3/ 16”) • 50mm (2”). All benefit from the options, Square • Ø30mm (1 3/ 16”) • 50mm (2”). All options allow a
new thoughtful detailing of concealed end stops. single or a twin cord which sits discreetly behind the curtain.
A colour coordinated metal cord retainer is supplied as standard,
for child safety.
H E AV Y D U T Y BE NT TO S HAP E
New Heavy Duty face fixed brackets and improved adjustable Gliderpole is the optimal solution for bends and curves.
brackets have been added to allow easy installation even in Precision bending and smooth running gliding systems combine
challenging situations. Wall brackets have a magnetic cover plate to provide superb functionality.
for hidden fixings. Brackets can also be supplied to custom
lengths and designs.

27 ↔ Supplied in sections - Maximum section per length 4.0m (157”) - Section lengths over 3.0m (118”) will incur a handling charge 28
 FIN ISH E S Coat Options

This stunning palette of colours and finishes is

available on all Gliderpoles and components,
with a choice of coat options throughout.

Matte Ⓜ Satin Ⓢ Gloss Ⓖ

GLIDERPOLE®
Cloud ⓂⓈⒼ Barley ⓂⓈⒼ Bone ⓂⓈⒼ Cream ⓂⓈⒼ Parchment ⓂⓈⒼ

Mineral ⓂⓈⒼ Dove ⓂⓈⒼ Millstone ⓂⓈⒼ Clay ⓂⓈⒼ Cocoa ⓂⓈⒼ

Alabaster ⓂⓈⒼ Dusk ⓂⓈⒼ Ceramic ⓂⓈⒼ Slate ⓂⓈⒼ Flint ⓂⓈⒼ

Damson ⓂⓈⒼ Moss ⓂⓈⒼ Smoke ⓂⓈⒼ Frame Grey ⓂⓈⒼ Raven ⓂⓈⒼ

Platinum ⓈⒼ Champagne ⓈⒼ Gold ⓈⒼ Cognac ⓈⒼ Gunmetal ⓈⒼ

Pictured left to right:

Round Ø 50mm (2”) Gliderpole ® - Hand Drawn • Flush End Cap • Millstone Matte

Round Ø 30mm (1 / 16 ”) Gliderpole ® - Hand Drawn • Flush End Cap • Dove - Matte
3

Square H 27mm (1 / 16 ”) Gliderpole ® - Hand Drawn • Flush End Cap • Mineral - Matte
1
Pewter ⓈⒼ Antique Brass ⓈⒼ Bronzed ⓈⒼ Natural Silver
Flat H 36mm (1 / 16 ”) Gliderpole ® - Hand Drawn • Flush End Cap • Bone - Matte
7

Due to printing limitations colours in this brochure may not be accurate

29 Samples are available on request - www.bradleycollection.com/samples/ 30
 FIN ISH E S
FLUID METAL™
At the cutting edge of metal finishing sits Fluid Metal. A first for draper y hardware,
this innovative specialist finishing technique allows authentic metal coatings to be
applied onto any substrate. For the first time, a brass or bronze coated Gliderpole

GLIDERPOLE®
becomes a reality.

Old Silver ⊕􀐫􀝧 􀉼 Old Pewter ⊕􀐫􀝧 􀉼 Old Brass ⊕􀐫􀝧 􀉼

Light Bronze ⊕􀐫􀝧 􀉼 Bronze Art ⊕􀐫􀝧 􀉼

FINIAL & BRACKET ONLY FINISHES

Polished Polished
Nickel ⊕􀐫 Brass Plate ⊕􀐫

POLE ONLY FIN ISHES

Bright Aluminium ⊕⊗ Bright Brass ⊕􀐫⊗

Pictured: Round Ø 50mm (2”) Gliderpole ® - Hand Drawn • Flush Stud • Old Brass
⊕ A finishing charge will apply 􀐫 Longer lead-times will apply ⊗ Not available on Square or 50mm (2”) poles
Due to printing limitations colours in this brochure may not be accurate. 􀝧 Fluid Metal finishes are supplied unlacquered and will tarnish over time, a clear lacquer may be applied on request as a
31 Samples are available on request - www.bradleycollection.com/samples/ custom finish 􀉼 Fluid Metal finishes are hand produced, finish may vary. 32
 FINIALS
This design edit allows Gliderpole to express different
personalities, from the minimalist to the flamboyant.
Halo Squat Globe
For even greater choice, finial designs from the Mio ø30mm (1 /16”) Inclusive Length 5mm ( /16”)
3 3
ø30mm (13/16”) Inclusive Length 53mm (21/16”)
ø50mm (2”) Inclusive Length 2mm ( /16”) 1
ø50mm (2”) Inclusive Length 81mm (33/16”)
Collection may also be specified.

GLIDERPOLE®
Globe Crystal Globe 􀆮
ø30mm (1 /16”) Inclusive Length 73mm (2 /8”)
3 7
ø30mm (13/16”) Inclusive Length 73mm (27/8”)
ø50mm (2”) Inclusive Length 114mm (4 /2”) 1
ø50mm (2”) Inclusive Length 114mm (41/2”)

Flush End Cap - Supplied as standard Flush Stud

Flute
Square H27mm (11/16”) Inclusive Length 3mm (1/8”) Square H27mm (11/16”) Inclusive Length 12mm (1/2”)
Flat H36mm (1 /16”) Inclusive Length 3mm (1/8”)
7
Flat H36mm (1 /16”) Inclusive Length 12mm (1/2”)
7
Ribbed Globe ø30mm (13/16”) Inclusive Length 73mm (27/8”)
ø30mm (1 /16”) Inclusive Length 73mm (2 /8”)
3 7 ø50mm (2”) Inclusive Length 114mm (41/2”)
Round ø30mm (13/16”) Inclusive Length 3mm (1/8”) Round ø30mm (13/16”) Inclusive Length 12mm (1/2”)
Round ø50mm (2”) Inclusive Length 3mm (1/8”) Round ø50mm (2”) Inclusive Length 18mm (11/16”) ø50mm (2”) Inclusive Length 114mm (4 /2”) 1

Stud Disc Templar Crystal Templar 􀆮

Round ø30mm (13/16”) Inclusive Length 12mm (1/2”) Round ø30mm (13/16”) Inclusive Length 12mm (1/2”) ø30mm (13/16”) Inclusive Length 79mm (31/8”) ø30mm (13/16”) Inclusive Length 79mm (31/8”)
Round ø50mm (2”) Inclusive Length 18mm (11/16”) Round ø50mm (2”) Inclusive Length 18mm (11/16”) ø50mm (2”) Inclusive Length 119mm (411/16”) ø50mm (2”) Inclusive Length 119mm (411/16”)

Pebble Ball Cut Crystal Templar 􀆮 Charm

Round ø30mm (1 /16”) Inclusive Length 42mm (1 /8”)
3 5
Round ø30mm (13/16”) Inclusive Length 66mm (25/8”) ø50mm (2”) Inclusive Length 119mm (411/16”) ø30mm (13/16”) Inclusive Length 69mm (211/16”)
Round ø50mm (2”) Inclusive Length 68mm (211/16”) Round ø50mm (2”) Inclusive Length 112mm (47/16”) ø50mm (2”) Inclusive Length 117mm (45/8”)

33 For full technical information, sizes and weights please download the specification guide - www.bradleycollection.com/specification-guides/ 􀆮 Crystal Finials should not be positioned in direct sunlight 34
 S I N GL E B RACKETS AD JU STAB L E B R AC K E T S
Side Mid Diameter Projection from wall to pole centre Side Fixing plate size Mid Fixing plate size Side Mid Diameter Projection from wall to pole centre Side Fixing plate size Mid Fixing plate size
Square H27mm (11/16”) 60mm (23/8”), 100mm (4”) W32mm (11/4”) x H70mm (23/4”) W32mm (11/4”) x H38mm (11/2”) Square H27mm (11/16”) Min.80mm (31/8”) Max.130mm (51/8”) W47mm (17/8”) x H76mm (3”) W47mm (17/8”) x H36mm (17/16”)
Flat H36mm (17/16”) 60mm (23/8”), 100mm (4”) W32mm (11/4”) x H70mm (23/4”) W32mm (11/4”) x H38mm (11/2”) Flat H36mm (17/16”) Min.80mm (31/8”) Max.130mm (51/8”) W47mm (17/8”) x H76mm (3”) W47mm (17/8”) x H36mm (17/16”)
Round ø30mm (13/16”) 60mm (23/8”), 100mm (4”) W32mm (11/4”) x H70mm (23/4”) W32mm (11/4”) x H38mm (11/2”) Round ø30mm (13/16”) Min.80mm (31/8”) Max.130mm (51/8”) W47mm (17/8”) x H76mm (3”) W47mm (17/8”) x H36mm (17/16”)
Round ø50mm (2”) 60mm (23/8”), 100mm (4”) W32mm (11/4”) x H70mm (23/4”) W32mm (11/4”) x H38mm (11/2”) Round ø50mm (2”) Min.80mm (31/8”) Max.130mm (51/8”) W47mm (17/8”) x H76mm (3”) W47mm (17/8”) x H36mm (17/16”)

GLIDERPOLE®
Side Mid Diameter Projection from wall to pole centre Side Fixing plate size Mid Fixing plate size
Heavy Duty Heavy Duty
Square H27mm (11/16”) 100mm (4”), 140mm (51/2”) W47mm (17/8”) x H76mm (3”) W47mm (17/8”) x H36mm (17/16”)
Flat H36mm (1 /16”)
7
100mm (4”), 140mm (51/2”) W47mm (17/8”) x H76mm (3”) W47mm (17/8”) x H36mm (17/16”)
Round ø30mm (13/16”)
Round ø50mm (2”)
100mm (4”), 140mm (51/2”)
100mm (4”), 140mm (51/2”)
W47mm (17/8”) x H76mm (3”)
W47mm (17/8”) x H76mm (3”)
W47mm (17/8”) x H36mm (17/16”)
W47mm (17/8”) x H36mm (17/16”)
D O U B L E B R AC K E T S
Side Mid Diameter Projection from wall to pole centre Side Fixing plate size Mid Fixing plate size
Square H27mm (11/16”) F140mm (51/2”) B adjustable W47mm (17/8”) x H76mm (3”) W47mm (17/8”) x H36mm (17/16”)
Flat H36mm (17/16”) F140mm (51/2”) B adjustable W47mm (17/8”) x H76mm (3”) W47mm (17/8”) x H36mm (17/16”)
Flush Diameter Drop from ceiling to top of pole Fixing plate size
Light Duty Round ø30mm (13/16”) F140mm (51/2”) B adjustable W47mm (17/8”) x H76mm (3”) W47mm (17/8”) x H36mm (17/16”)
Square H27mm (1 /16”)
1
3mm ( /8”)
1
W20mm (13/16”) x L50mm (2”)
Round ø50mm (2”) F140mm (51/2”) B adjustable W47mm (17/8”) x H76mm (3”) W47mm (17/8”) x H36mm (17/16”)
Flat H36mm (17/16”) 3mm (1/8”) W20mm (13/16”) x L50mm (2”)
Round ø30mm (13/16”) 3mm (1/8”) W20mm (13/16”) x L50mm (2”)

Flush Diameter Drop from ceiling to top of pole Fixing plate size
Heavy Duty
Square H27mm
Flat H36mm
(1 /16”)
(17/16”)
1
3mm ( /8”)
1

3mm (1/8”)
W40mm
W40mm
(19/16”) x L59mm (25/16”)
(19/16”) x L59mm (25/16”)
C U ST O M B R AC K E T S
Round ø30mm (13/16”) 3mm (1/8”) W40mm (19/16”) x L59mm (25/16”)
Round ø50mm (2”) 3mm (1/8”) W40mm (19/16”) x L59mm (25/16”)
A bespoke design service is offered to ensure solutions in even the most challenging installations.

R EC E S S B RACKETS
Recess Diameter Depth off wall Fixing plate size
with hook stop
Square H27mm (1 /16”)
1
14mm ( /16”)9
W42mm (111/16”) x H27mm (11/16”) Custom Projection Custom Fixing Plate Uplift Ceiling Brackets Angled Brackets
Flat H36mm(17/16”) 14mm (9/16”) W31mm (11/4”) x H36mm (17/16”) Specify the exact Relevant where space is Helps negotiate cornice Specify exact projection The solution for tight and
Round ø30mm (13/16”) 14mm (9/16”) W40mm (19/16”) x H31mm (11/4”) projection needed. restricted or weight is a and similar architectural required from ceiling. awkward locations.
Round ø50mm (2”) 14mm (9/16”) W64mm (11/2”) x H51mm (2”) concern. features.

35 For full technical information, sizes and weights please download the specification guide - www.bradleycollection.com/specification-guides/ 36
 GL I D I N G O P TIO NS AC C E SSO R IE S
2C Gliders Rollers⌘ Wave ® 2C gliders Wave ® rollers⌘ Draw Rods Cord Retainer
Fine Standard

GLIDERPOLE®
Drop from bottom of track: Drop from bottom of track: Drop from bottom of track: Drop from bottom of track:
8mm (5/16”) 8mm (5/16”) 8mm (5/16”) 27mm (11/16”)
Wave® Pitch: Wave® Pitch:
60mm (23/8”) • 80mm (31/8”) 80mm (31/8”)

POL E S
Poles are cut, bent and curved to suit individual requirements.
When calculating the length of your pole, remember to allow tolerance beyond the width of All corded tracks are supplied as standard with a metal cord
the frame for the curtains to stack back to the edge of the window.
retainer. This ensures that all cords are safely secured to the wall
Maximum pole length in one piece 4.0m (157”). ↔ and complies with BS EN 13120:2009+A12014.

Poles exceeding the maximum length will be cut into equal parts unless otherwise specified. This will be supplied in the same finish as the system, unless
A pole joiner will be supplied. advised otherwise.

Twin cord systems are always supplied in an even number of parts & will be supplied in a
minimum of two sections.

Size Control Type Maximum distance between brackets Minimum bend radius
Square H27mm (11/16”) Hand Drawn 1000mm (39”) R300mm (12”)
Corded 1000mm (39”) n/a
Flat H36mm (17/16”) Hand Drawn 1000mm (39”) R200mm (8”)
Round ø30mm (13/16”) Hand Drawn 1000mm (39”) R300mm (12”)
Draw rod length: Fixing plate size:
Corded 1000mm (39”) R300mm (12”)
1000mm (39 /8”)
3
ø60mm (23/8”)
Round ø50mm (2”) Hand Drawn 1000mm (39”) R600mm (24”)
Corded 1000mm (39”) R670mm (26”)
Custom lengths available to order

↔ Supplied in sections - Section lengths over 3.0m (118”) will incur a handling charge ⌘ Supplied as standard on systems over 3.0m (10ft) with single stack curtains
37 For full technical information, sizes and weights please download the specification guide - www.bradleycollection.com/specification-guides/ 38
 STEEL
STEEL
The Steel Collection remains a byword in elegance. Historical
design cues, high quality materials and traditional artisan skills
are all on display in this timeless classic.

Pictured: Ø 25mm (1”) Pole • Flared Disc • Brass Toned

Interior design: Georgia Victoria - Edinburgh - UK

39 40
 ST E E L
F U N CT I O N L E N GTH
Brackets are designed for easy installation, with an optional Poles can be cut to any length. ↔ On longer systems, the use of
magnetic cover plate. passing brackets & rings will allow uninterrupted travel of the
Brackets can be supplied to custom lengths and designs. drapes along the full length of the system.

STEEL
C RAFTED IN SUFFOLK P URE F O RM BE N T T O S H A PE F R ENC H P OL ES
A picture of elegance, the Steel Collection blends innovative The original Steel collection is available in four pole diameters A bespoke bay bending and curving service is available on all The French pole from the Steel Collection is an iconic design
design with quality craftsmanship, Ø19mm ( 3/ 4”) • 25mm (1”) • 38mm (1 1/ 2”) • 50mm (2”). diameters to allow the perfect shaped pole to fit any bay window. favourite. A simple and sophisticated way to adorn windows.
Each component has been carefully scaled to maintain the
aesthetic of the Collection.

41 ↔ Supplied in sections - Maximum section per length 4.0m (157”) - Section lengths over 2.4m (94”) will incur a handling charge 42
 FINISHES
Signature translucent finishes of the Steel Collection
allow the beauty of steel to shine through.

STEEL
Polished Natural Steel Brass Toned Matte Brass Toned Bronzed Ⓢ Oil Rubbed Waxed Flint Ⓢ

Pictured left to right: Ø 25mm (1”) Pole • Hammered Ball & Collar Antique Brass has been
Polished Steel • Natural Steel • Brass Toned • Matte Brass toned
added to Steel Collection
Bronzed - Satin • Waxed • Oil Rubbed • Flint - Satin
for the 21|22 season

Antique Brass Ⓢ

Ⓢ Satin Coat
43 Due to printing limitations colours in this brochure may not be accurate - Samples are available on request - www.bradleycollection.com/samples/ 44
 FINIALS
Simplicity is the watchword for this grouping of stud, disc and ball designs.

Standard Stud Medium Stud Forged Disc 􀉼 Hammered Disc 􀉼

ø19mm (3/4”) Inclusive Length 6mm (1/4”) ø19mm (3/4”) Inclusive Length 6mm (1/4”) ø19mm (3/4”) Inclusive Length 2mm (1/16”) ø19mm (3/4”) Inclusive Length 2mm (1/16”)
ø25mm (1”) Inclusive Length 8mm (5/16”) ø25mm (1”) Inclusive Length 8mm (5/16”) ø25mm (1”) Inclusive Length 3mm (3/8”) ø25mm (1”) Inclusive Length 3mm (3/8”)
ø38mm (11/2”) Inclusive Length 10mm (3/8”) ø38mm (11/2”) Inclusive Length 10mm (3/8”) ø38mm (11/2”) Inclusive Length 3mm (3/8”) ø38mm (11/2”) Inclusive Length 3mm (3/8”)
ø50mm (2”) Inclusive Length 12mm ( /2”) 1
ø50mm (2”) Inclusive Length 12mm ( /2”) 1
ø50mm (2”) Inclusive Length 4mm ( /16”)
3
ø50mm (2”) Inclusive Length 4mm (3/16”)

STEEL
Large Stud Hammered Stud 􀉼 Ball & Collar Crystal Ball & Collar 􀆮
ø19mm ( /4”) Inclusive Length 6mm ( /4”)
3 1
ø19mm ( /4”) Inclusive Length 10mm ( /8”)
3 3
ø19mm ( /4”) Inclusive Length 55mm (2 /16”)
3 3
ø19mm (3/4”) Inclusive Length 65mm (29/16”)
ø25mm (1”) Inclusive Length 8mm (5/16”) ø25mm (1”) Inclusive Length 12mm (1/2”) ø25mm (1”) Inclusive Length 65mm (29/16”) ø25mm (1”) Inclusive Length 75mm (215/16”)
ø38mm (1 /2”) Inclusive Length 10mm ( /8”)
1 3
ø38mm (1 /2”) Inclusive Length 16mm ( /8”)
1 5
ø38mm (1 /2”) Inclusive Length 75mm (2 /16”)
1 15
ø38mm (11/2”) Inclusive Length 103mm (41/16”)
ø50mm (2”) Inclusive Length 12mm (1/2”) ø50mm (2”) Inclusive Length 20mm (13/16”) ø50mm (2”) Inclusive Length 103mm (41/16”)

Button Stud Pebble Hammered Ball & Collar 􀉼 Ball & Claw 􀉼
ø19mm (3/4”) Inclusive Length 26mm (1”) ø19mm (3/4”) Inclusive Length 27mm (11/16”) ø19mm (3/4”) Inclusive Length 55mm (23/16”) ø19mm (3/4”) Inclusive Length 75mm (3”)
ø25mm (1”) Inclusive Length 40mm (19/16”) ø25mm (1”) Inclusive Length 31mm (11/4”) ø25mm (1”) Inclusive Length 65mm (29/16”) ø25mm (1”) Inclusive Length 90mm (39/16”)
ø38mm (11/2”) Inclusive Length 59mm (25/16”) ø38mm (11/2”) Inclusive Length 48mm (17/8”) ø38mm (11/2”) Inclusive Length 120mm (43/4”)
ø50mm (2”) Inclusive Length 69mm (2 /16”) 11

Flared Stud Flared Disc Ribbed Ball & Collar Twisted Knot 􀉼
ø19mm (3/4”) Inclusive Length 12mm (1/2”) ø19mm ( /4”) Inclusive Length 17mm ( /16”)
3 11
ø19mm (3/4”) Inclusive Length 53mm (21/16”) ø19mm (3/4”) Inclusive Length 90mm (39/16”)
ø25mm (1”) Inclusive Length 14mm ( /16”) 9 ø25mm (1”) Inclusive Length 21mm ( /8”) 7
ø25mm (1”) Inclusive Length 60mm (2 /8”)3 ø25mm (1”) Inclusive Length 95mm (33/4”)
ø38mm (1 /2”) Inclusive Length 26mm (1”)
1 ø38mm (11/2”) Inclusive Length 34mm (15/16”) ø38mm (11/2”) Inclusive Length 150mm (57/8”)

􀉼 Due to manufacturing process’s size and shape may vary slightly to images above 􀆮 Crystal Finials should not be positioned in direct sunlight
45 For full technical information, sizes and weights please download the specification guide - www.bradleycollection.com/specification-guides/ 46
 FINIALS
The true craft of the artisan is on
display with these designs.

STEEL
Pictured left to right: Ø 25mm (1”) • Jacobs Horn • Waxed
Curling Leaf • Bronzed - Satin • Loop • Antique Brass - Satin
Button Stud • Matte Brass Toned • Pebble • Natural Steel

Hammered Spear 􀉼 Double Ball Basket 􀉼 Loop 􀉼 Curling Leaf 􀉼

ø19mm (3/4”) Inclusive Length 122mm (413/16”) ø19mm (3/4”) Inclusive Length 142mm (59/16”) ø19mm (3/4”) Inclusive Length 115mm (41/2”) ø19mm (3/4”) Inclusive Length 110mm (45/16”)
ø25mm (1”) Inclusive Length 150mm (57/8”) ø25mm (1”) Inclusive Length 146mm (53/4”) ø25mm (1”) Inclusive Length 135mm (55/16”) ø25mm (1”) Inclusive Length 140mm (51/2”)
ø38mm (11/2”) Inclusive Length 205mm (81/16”) ø38mm (11/2”) Inclusive Length 180mm (71/16”) ø38mm (11/2”) Inclusive Length 200mm (8”)

Square Ram’s Horn 􀉼 Reverse Square Ram’s Horn 􀉼

Tusk 􀉼 Jacob’s Horn 􀉼
ø19mm ( /4”) Inclusive Length120mm (4 /4”)
3 3
ø19mm (3/4”) Inclusive Length 55mm (23/16”)
ø19mm (3/4”) Inclusive Length 118mm (45/8”) ø19mm (3/4”) Inclusive Length 105mm (41/8”)
ø25mm (1”) Inclusive Length135mm (5 /16”)
5
ø25mm (1”) Inclusive Length 55mm (23/16”)
ø25mm (1”) Inclusive Length 141mm (59/16”) ø25mm (1”) Inclusive Length 130mm (51/8”)
ø38mm (11/2”) Inclusive Length 180mm (71/16”)

􀉼 Due to manufacturing process’s size and shape may vary slightly to images above  handed finial
47 For full technical information, sizes and weights please download the specification guide - www.bradleycollection.com/specification-guides/ 48
 S I N GL E B RACKETS AD JU STAB L E B R AC K E T S
Side Diameter Projection from wall to pole centre Fixing plate size Covered Fixing plate size Side Diameter Projection from wall to pole centre Fixing plate size
ø19mm (3/4”) 60mm (23/8”), 100mm (4”) W20mm (13/16”) x H84mm (35/16”) W55mm (23/16”) x H20mm (13/16”) ø19mm (3/4”) Min.65mm (29/16”) Max.150mm (57/8”) W20mm (13/16”) x H84mm (35/16”)
ø25mm (1”) 60mm (23/8”), 100mm (4”) W25mm (1”) x H102mm (4”) W60mm (23/8”) x H25mm (1”) ø25mm (1”) Min.75mm (215/16”) Max.175mm (67/8”) W25mm (1”) x H102mm (4”)
ø38mm (11/2”) 100mm (4”) W30mm (13/16”) x H117mm (45/8”) W80mm (31/8”) x H30mm (13/16”) ø38mm (11/2”) Min.95mm (33/4”) Max.200mm (77/8”) W30mm (13/16”) x H117mm (45/8”)
ø50mm (2”) 100mm (4”) W30mm (13/16”) x H117mm (45/8”) W80mm (31/8”) x H30mm (13/16”)

Mid Passing Diameter Projection from wall to pole centre Fixing plate size
ø19mm (3/4”) Min.65mm (29/16”) Max.150mm (57/8”) W55mm (23/16”) x H20mm (13/16”)
Mid Passing Diameter Projection from wall to pole centre Fixing plate size Covered fixing plate size ø25mm (1”) Min.75mm (215/16”) Max.175mm (67/8”) W60mm (23/8”) x H25mm (1”)

ø19mm (3/4”) 60mm (23/8”), 100mm (4”) W55mm (23/16”) x H20mm (13/16”) W59mm (25/16”) x H24mm (15/16”) ø38mm (11/2”) Min.95mm (33/4”) Max.200mm (77/8”) W80mm (31/8”) x H30mm (13/16”)

ø25mm (1”) 60mm (23/8”), 100mm (4”), 140mm (51/2”)􀢥 W60mm (23/8”) x H25mm (1”) W64mm (21/2”) x H29mm (11/8”)
ø38mm (11/2”) 100mm (4”) W80mm (31/8”) x H30mm (13/16”) W84mm (35/16”) x H34mm (15/16”)

STEEL
ø50mm (2”) 100mm (4”) W80mm (31/8”) x H30mm (13/16”) W84mm (35/16”) x H34mm (15/16”)

D O U B L E B R AC K E T S
Ceiling Passing Diameter Drop from ceiling to pole centre Fixing plate size
Side Diameter Projection from wall to pole centre Fixing plate size
ø19mm (3/4”) 60mm (23/8”), 100mm (4”) W55mm (23/16”) x H20mm (13/16”)
Fø25mm (1”) F160mm (65/16”) W25mm (1”)
ø25mm (1”) 60mm (23/8”), 100mm (4”) W60mm (23/8”) x H25mm (1”)
Bø19mm (3/4”) B60mm (23/8”) x H102mm (4”)
ø38mm (1 /2”)1
100mm (4”) W80mm (31/8”) x H30mm (13/16”)
Fø38mm (11/2”) F160mm (65/16”) W30mm (13/16”)
Bø25mm (1”) B60mm (23/8”) x H117mm (45/8”)

Mid Passing Diameter Projection from wall to pole centre Mid fixing plate size Passing fixing plate size

R EC E S S B RACKE TS Fø25mm (1”)

Bø19mm (3/4”)
F160mm (65/16”)
B60mm (23/8”)
W60mm (23/8”)
x H25mm (1”)
W112mm (47/16”)
x H50mm (2”)
Fø38mm (11/2”) F160mm (65/16”) W80mm (31/8”) W122mm (413/16”)
Recess Diameter Depth off wall Fixing plate size
Bø25mm (1”) B60mm (23/8”) x H30mm (13/16”) x H60mm (23/8”)
with ring stop
ø19mm (3/4”) 4mm (3/16”) ø42mm (13/16”)
ø25mm (1”) 4mm (3/16”) ø50mm (2”)
ø38mm (11/2”) 4mm (3/16”) ø72mm (213/16”)
ø50mm (2”) 4mm (3/16”) ø72mm (213/16”)
C U ST O M B R AC KE T S
Steel can be customised to suit virtually any window.

F R E N C H B RACKETS
French - End Diameter Projection from wall to pole centre Fixing plate size
ø25mm (1”) 100mm (4”), 140mm (51/2”)􀢥 W26mm (1”) x H80mm (31/8”)
Custom Projection Custom Fixing Plate Uplift Arm Angled Brackets
Specify the exact Relevant where space is Helps negotiate cornice For really tricky The solution for tight and
projection needed. restricted or weight is a and similar architectural installations, arms without awkward locations.
concern. features. backplates can be
designed for direct fixing.

􀢥 140mm (51/2”) Mid & Passing brackets only available on French poles.
49 For full technical information, sizes and weights please download the specification guide - www.bradleycollection.com/specification-guides/ 50
 C L A S S I C RIN G S ACCESSORIES
Ring Passing Diameter Ring drop from top of pole Passing ring drop from top of pole Ombres Draw Rods Ⓟ
Ring to bottom of ringlet to bottom of ringlet
ø19mm (3/4”) 44mm (13/4”) 49mm (115/16”) Large Stud Ball & Collar Standard Stud Ball & Collar
ø25mm (1”) 49mm (115/16””) 54mm (21/8”)
ø38mm (11/2”) 63mm (21/2”) 71mm (213/16”)
ø50mm (2”) 82mm (31/4”) 89mm (31/2”)

Internal projection from wall: 125mm (415/16”) Internal projection from wall: 125mm (415/16”)
Fixing plate size: ø60mm (23/8”) Fixing plate size: ø60mm (23/8”)

STEEL
PO L E S Hold back
Standard Stud Ball & Collar
Poles are cut, bent and curved to suit individual requirements.
When calculating the length of your pole, remember to allow tolerance
beyond the width of the frame for the curtains to draw back to the edge of the window.

Maximum pole length in one piece 4.0m (157”). ↔

Poles exceeding the recommended maximum distance between brackets,
will be cut into equal parts unless otherwise specified.
Pole joiners will be supplied.

Internal measurement: 134mm (51/4”)

Fixing plate size: W20mm (13/16”) x H56mm (23/16”)

50mm (2”)
Tie Back Hook Drapery Arm
38mm (1 1 /2 ”)
Drapery arms have been designed to work at
25mm (1”) dormer windrows, doorways & above beds.
19mm ( 3 /4 ”)

Diameter Recommended maximum Recommended curtain type for pole diameter Minimum French Pole
distance between brackets bend radius bend radius
ø19mm (3/4”) 1800mm (71”) Light to medium weight, lined & non interlined curtains R75mm (3”) n/a
ø25mm (1”) 2000mm (79”) Medium weight, lined & interlined curtains R100mm (4”) R50mm (2”)
ø38mm (11/2”) 2200mm (87”) Medium to heavy weight, lined & interlined curtains R255mm (10”) n/a
Internal measurement: 27mm (11/16”) Diameter: ø25mm (1”) Draw rod length:
ø50mm (2”) 2400mm (96”) Heavy weight interlined curtains R255mm (10”) n/a
Fixing plate size: W20mm (13/16”) x H78mm (31/16”) Fixing plate size: W30mm (13/16”) x H185mm (71/4”) 1000mm (393/8”)
Custom lengths available to order

↔ Section lengths over 2.4m (94”) will incur a handling charge

51 For full technical information, sizes and weights please download the specification guide - www.bradleycollection.com/specification-guides/ Ⓟ Not recommended for use with passing rings. 52
 MIO

MIO
MIO
The sharp, modern form of the Mio Collection flows from its
purposeful design intent and the use of laser technology in
its production.

The precision styling can be accentuated by the industrial,

brushed stainless finish or can be softened with contemporar y
coated finishes.

Pictured: Ø 50mm (2”) Pole • Stud • Brushed Stainless

Interior design: Bayon Design Studio Inc - California - USA

53 54
 MIO
􀆮
C LEAN LI N ES L E N GT H ACRY L IC
The distinct aesthetic is achieved by utilising the latest Poles can be cut to any length. ↔ On longer systems, the use of For the ultimate luxur y statement, the tones & finishes of Mio can
technology, from CNC lathes & mills to laser cutting. passing brackets & rings will allow uninterrupted travel of the be paired with a solid acr ylic pole.
This ensures a crisp edge and an accurate fit. drapes along the full length of the system.

MIO
MIO
S C ALE F UN C T I O N
A range of bracket options have been designed to allow easy
BE N T T O S H A PE F R ENC H P OL ES
Mio offers the widest choice of finish & scale for your interior.
Installation. Brackets have magnetic cover plates to hide fixings. A bespoke bay bending and curving service is available on all The traditional French pole re-styled for modern living, with
From soft matte hues & rich metal finishes to engineered, Brushed
Brackets can also be supplied to custom lengths and designs. diameters, to allow the perfect shaped pole for any window. understated bracket design and lined rings.
Stainless and all available in five pole diameters.
Ø19mm (3/4”) • 25mm (1”) • 30mm (13/16”) • 38mm (11/2”) • 50mm (2”).

↔ Supplied in sections - Maximum section per length 4.0m (157”) - Section lengths over 2.4m (94”) will incur a handling charge
55 􀆮 Acrylic poles should not be positioned in direct sunlight, and are not suitable for use in conservatories or outdoors 56
 F I N I S H ES Coat Options

Mio has an unparalleled selection of subtle

colour coats, which can be specified in
matte, satin or gloss finishes.

For more glamorous projects, metallic coats Matte Ⓜ Satin Ⓢ Gloss Ⓖ

are featured in both satin and gloss.

Cloud ⓂⓈⒼ Barley ⓂⓈⒼ Bone ⓂⓈⒼ Cream ⓂⓈⒼ Parchment ⓂⓈⒼ

MIO
MIO
Mineral ⓂⓈⒼ Dove ⓂⓈⒼ Millstone ⓂⓈⒼ Clay ⓂⓈⒼ Cocoa ⓂⓈⒼ

Alabaster ⓂⓈⒼ Dusk ⓂⓈⒼ Ceramic ⓂⓈⒼ Slate ⓂⓈⒼ Flint ⓂⓈⒼ

Damson ⓂⓈⒼ Moss ⓂⓈⒼ Smoke ⓂⓈⒼ Frame Grey ⓂⓈⒼ Raven ⓂⓈⒼ

Platinum ⓈⒼ Champagne ⓈⒼ Gold ⓈⒼ Cognac ⓈⒼ Gunmetal ⓈⒼ

Pictured left to right:

Ø 25mm (1”) • Flush Stud • Cloud - Matte • Stud • Dove - Satin
Disc • Millstone - Gloss • Octagon Stud • Champagne - Satin Pewter ⓈⒼ Antique Brass ⓈⒼ Bronzed ⓈⒼ Natural Silver
Pebble • Antique Brass - Gloss

Due to printing limitations colours in this brochure may not be accurate

57 Samples are available on request - www.bradleycollection.com/samples/ 58
 FIN ISH E S
Mio also offers a selection of more specialised options,
including brushed finishes on authentic stainless steel.

MIO
MIO
STAINLESS PLATED
Brushed stainless steel, self-coloured or in subtle tinted Polished plated finishes provide a
hues gives an industrial aesthetic. traditional sense of luxur y.

Brushed Stainless Ⓕ⊕􀐫 Brass Tint Ⓕ⊕􀐫 Polished Nickel ⊕􀐫 Polished Brass Plate ⊕􀐫

Pictured left to right:

Ø 25mm (1”) • Large Disc • Polished Brass Plate • Stud • Polished Nickel

Octagon Stud • Brushed Brass Tint • Squat Disc • Brushed Stainless Bronze Tint Ⓕ⊕􀐫 Carbon Tint Ⓕ⊕􀐫
Faceted Disc • Brushed Carbon Tint • Ball • Brushed Bronze Tint

Due to printing limitations colours in this brochure may not be accurate

59 Samples are available on request - www.bradleycollection.com/samples/ ⊕ A finishing charge will apply 􀐫 Longer lead-times will apply Ⓕ Not available with French poles options 60
 FINISHES

MIO
MIO
Pictured: Ø 38mm (1 1/ 2”) Pole • Squat Disc • Old Pewter
Ø 50mm (2”) Acr ylic Pole • Stud • Polished Nickel

Ø 50mm (2”) Acr ylic Pole • Faceted Disc • Brushed Brass Tint

FLUID METAL™ ACRYLIC POLES

Exciting new finishing technology for Mio enables a richness and rarity of finish Transparent acr ylic poles may be teamed
not previously possible on a steel-based product. with components in any of the Mio finishes.

Clear Acrylic Pole 􀆮

Old Silver ⊕􀐫􀝧 􀉼 Old Pewter ⊕􀐫􀝧 􀉼 Old Brass ⊕􀐫􀝧 􀉼 Light Bronze ⊕􀐫􀝧 􀉼 Bronze Art ⊕􀐫􀝧 􀉼

⊕ A finishing charge will apply 􀐫 Longer lead-times will apply

􀝧 Fluid Metal finishes are supplied unlacquered and will tarnish over time, a clear lacquer may be applied on request as a custom finish 􀉼 Fluid Metal finishes are hand produced, finish may vary.
61 Due to printing limitations colours in this brochure may not be accurate. Samples are available on request - www.bradleycollection.com/samples/ 􀆮 Acrylic poles should not be positioned in direct sunlight, and are not suitable for use in conservatories or outdoors 62
 FINIALS
Mio – Simplicity of design and purity of form.

Flush Stud Octagon Stud Faceted Disc

ø19mm (3/4”) Inclusive Length 6mm (1/4”) ø19mm (3/4”) Inclusive Length 7mm (1/4”) ø19mm (3/4”) Inclusive Length 21mm (13/16”)
ø25mm (1”) Inclusive Length 6mm (1/4”) ø25mm (1”) Inclusive Length 10mm (3/8”) ø25mm (1”) Inclusive Length 28mm (11/8”)
ø30mm (13/16”) Inclusive Length 6mm (1/4”) ø30mm (13/16”) Inclusive Length 10mm (3/8”) ø30mm (13/16”) Inclusive Length 28mm (11/8”)
ø38mm (1 /2”) Inclusive Length 8mm ( /16”)
1 5
ø38mm (1 /2”) Inclusive Length 11mm ( /16”)
1 7
ø38mm (11/2”) Inclusive Length 41mm (15/8”)
ø50mm (2”) Inclusive Length 8mm (5/16”) ø50mm (2”) Inclusive Length 14mm (9/16”) ø50mm (2”) Inclusive Length 54mm (21/8”)

Stud Pebble
Squat Disc
ø19mm (3/4”) Inclusive Length 25mm (1”)
ø19mm ( /4”) Inclusive Length 2mm ( /16”)
3 1
ø19mm (3/4”) Inclusive Length 17mm (11/16”)

MIO
MIO
ø25mm (1”) Inclusive Length 34mm (15/16”)
ø25mm (1”) Inclusive Length 3mm (1/8”) ø25mm (1”) Inclusive Length 23mm (7/8”)
ø30mm (13/16”) Inclusive Length 39mm (19/16”)
ø30mm (13/16”) Inclusive Length 3mm (1/8”) ø30mm (13/16”) Inclusive Length 23mm (7/8”)
ø38mm (11/2”) Inclusive Length 50mm (115/16”)
ø38mm (1 /2”) Inclusive Length 3mm ( /8”)
1 1
ø38mm (11/2”) Inclusive Length 33mm (15/16”)
ø50mm (2”) Inclusive Length 66mm (29/16”)
ø50mm (2”) Inclusive Length 4mm (3/16”) ø50mm (2”) Inclusive Length 44mm (13/4”)

Disc Ball Crystal Ball 􀆮

ø19mm (3/4”) Inclusive Length 2mm (1/16”) ø19mm (3/4”) Inclusive Length 50mm (2”) ø19mm (3/4”) Inclusive Length 55mm (33/16”)
ø25mm (1”) Inclusive Length 3mm (1/8”) ø25mm (1”) Inclusive Length 63mm (2 /2”) 1 ø25mm (1”) Inclusive Length 66mm (25/8”)
ø30mm (13/16”) Inclusive Length 3mm (1/8”) ø30mm (1 /16”) Inclusive Length 62mm (2 /16”)
3 7 ø30mm (13/16”) Inclusive Length 66mm (25/8”)
ø38mm (11/2”) Inclusive Length 3mm (1/8”) ø38mm (1 /2”) Inclusive Length 83mm (3 /4”)
1 1 ø38mm (11/2”) Inclusive Length 85mm (33/8”)
ø50mm (2”) Inclusive Length 4mm ( /16”) 3
ø50mm (2”) Inclusive Length 104mm (44/16”) ø50mm (2”) Inclusive Length 108mm (41/4”)

Large Disc Cut Crystal Ball 􀆮 Crystal Element 􀆮

Pictured left to right: ø19mm (3/4”) Inclusive Length 4mm (3/16”) ø19mm (3/4”) Inclusive Length 55mm (33/16”) ø30mm (13/16”) Inclusive Length 87mm (37/16”)
1
Ø 38mm (1 / 2 ”) • Pebble • Moss - Matte ø25mm (1”) Inclusive Length 4mm ( /16”) 3
ø25mm (1”) Inclusive Length 66mm (2 /8”) 5
ø50mm (2”) Inclusive Length 126mm (415/16”)
3
Ø 19mm ( / 4 ”) • Flush Stud • Frame Grey - Matte
ø30mm (13/16”) Inclusive Length 4mm (3/16”) ø30mm (13/16”) Inclusive Length 66mm (25/8”)
Ø 50mm (2”) • Cr ystal Ball • Damson - Matte
ø38mm (11/2”) Inclusive Length 6mm (1/4”) ø38mm (11/2”) Inclusive Length 85mm (33/8”)
Ø 25mm (1”) • Ball • Smoke - Matte
3
Ø 30mm (1 / 16 ”) • Large Disc • Raven - Matte
ø50mm (2”) Inclusive Length 6mm ( /4”) 1
ø50mm (2”) Inclusive Length 108mm (41/4”)

For full technical information, sizes and weights please download the specification guide -
63 www.bradleycollection.com/specification-guides/ 􀆮 Crystal Finials should not be positioned in direct sunlight 64
 S I N GL E B RACKETS AD JU STAB L E B R AC K E T S
Side Diameter Projection from wall to pole centre Fixing plate size Side Passing Diameter Projection from wall to pole centre Fixing plate size
ø19mm (3/4”) 60mm (23/8”), 100mm (4”) W34mm (15/16”) x H70mm (23/4”) ø19mm (3/4”) Min.60mm (2 3/ 8”) Max.170mm (6 11/ 16”) W34mm (15/16”) x H70mm (23/4”)
ø25mm (1”) 60mm (23/8”), 100mm (4”) W34mm (15/16”) x H70mm (23/4”) ø25mm (1”) Min.60mm (2 3/ 8 ”) Max.170mm (6 11/ 16 ”) W34mm (15/16”) x H70mm (23/4”)
ø30mm (13/16”) 100mm (4”) W34mm (15/16”) x H70mm (23/4”) ø30mm (13/16”) Min.100mm (4”) Max.170mm (6 11/ 16 ”) W34mm (15/16”) x H70mm (23/4”)
ø38mm (1 /2”) 1
100mm (4”) W52mm (21/16”) x H104mm (41/8”) ø38mm (11/2”) Min.100mm (4”) Max.170mm (6 11/ 16 ”) W52mm (21/16”) x H104mm (41/8”)
ø50mm (2”) 100mm (4”) W52mm (21/16”) x H104mm (41/8”) ø50mm (2”) Min.100mm (4”) Max.170mm (6 11/ 16 ”) W52mm (21/16”) x H104mm (41/8”)

Mid Passing Diameter Projection from wall to pole centre Fixing plate size
ø19mm ( /4”)
3
60mm (2 /8”), 100mm (4”)
3
W70mm (23/4”) x H34mm (15/16”)
ø25mm (1”) 60mm (23/8”), 100mm (4”), 140mm (51/2”)􀢥 W70mm (23/4”) x H34mm (15/16”)
ø30mm (13/16”) 100mm (4”) W70mm (23/4”) x H34mm (15/16”)
ø38mm (11/2”) 100mm (4”) W104mm (41/8”) x H52mm (21/16”)
ø50mm (2”) 100mm (4”) W104mm (41/8”) x H52mm (21/16”)
D O U B L E B R AC KE T S
Ceiling Passing Diameter Projection from wall to pole centre Fixing plate size
ø19mm (3/4”) 60mm (23/8”), 100mm (4”) W70mm (23/4”) x H34mm (15/16”) Side Diameter Projection from wall to pole centre Fixing plate size
ø25mm (1”) 60mm (23/8”), 100mm (4”) W70mm (23/4”) x H34mm (15/16”)
Fø25mm (1”) F160mm (6 /16”)
5
W34mm (15/16”) x
ø30mm (13/16”) 100mm (4”) W70mm (23/4”) x H34mm (15/16”)

MIO
MIO
Bø19mm (3/4”) B60mm (23/8”) H70mm (23/4”)
ø38mm (11/2”) 100mm (4”) W104mm (41/8”) x H52mm (21/16”)
Fø38mm (11/2”) F160mm (65/16”) W52mm (21/16”) x
ø50mm (2”) 100mm (4”) W104mm (41/8”) x H52mm (21/16”)
Bø25mm (1”) B60mm (23/8”)
H104mm (41/8

Mid Passing Diameter Projection from wall to pole centre Mid fixing plate size Passing fixing plate size
Fø25mm (1”) F160mm (65/16”) W70mm (23/4”) x W72mm (213/16”) x
Bø19mm (3/4”) B60mm (23/8”) H34mm (15/16”) H59mm (25/16”)
Fø38mm (11/2”)

R EC E S S B RACKETS Bø25mm (1”)

F160mm (65/16”)
B60mm (23/8”)
W104mm (41/8”) x
H52mm (21/16”)
W52mm
H104mm
(21/16”) x
(41/8”)

Recess Diameter Depth off wall Fixing plate size

with ring stop
ø19mm (3/4”) 7mm (1/4”) ø26mm (1”)
ø25mm (1”) 8mm (5/16”) ø34mm (15/16)
ø30mm (1 /16”) 3
10mm (3/8”) ø40mm (19/16”)
ø38mm (11/2”)
ø50mm (2”)
12mm (1/2”)
15mm (9/16”)
ø49mm (115/16”)
ø64mm (21/2”)
C U ST O M B R AC KE T S
Mio can be customised to suit virtually any window.

F R E N C H B RACKE TS
French - End Ⓕ Diameter Projection from wall to pole centre Fixing plate size Custom Projection Custom Fixing Plate Uplift Angled Brackets
ø25mm (1”) 100mm (4”), 140mm (51/2”)􀢥 W26mm (1”) x H80mm (31/8”) Specify the exact Relevant where space is Helps negotiate cornice The solution for tight and
projection needed. restricted or weight is a and similar architectural awkward locations.
concern. features.

Ⓕ Not available with brushed finishes 􀢥 140mm (51/2”) Mid & Passing brackets only available on French poles.
65 For full technical information, sizes and weights please download the specification guide - www.bradleycollection.com/specification-guides/ 66
 LI NE D R IN G S AC C E SSO R IE S
A smart, discreet nylon liner provides for smoother, quieter operation of drapes. Ombres Draw Rods Ⓟ
Small Large Fine Standard
Ring Passing Diameter Ring drop from top of pole to bottom of ringlet
Ring
ø19mm (3/4”) 44mm (13/4”)
ø25mm (1”) 53mm (21/16”)
ø30mm (13/16”) 53mm (21/16”)
ø38mm (11/2”) 66mm (25/8)
ø50mm (2”) 80mm (31/8”)

Internal projection from wall: 150mm (57/8”) Internal projection from wall: 150mm (57/8”)
Fixing plate size: ø19mm (3/4”) Fixing plate size: ø25mm (1”)

POLES

MIO
MIO
Hold back

Poles are cut, bent and curved to suit individual requirements.

When calculating the length of your pole, remember to allow tolerance
beyond the width of the frame for the curtains to draw back to the edge of the window.

Maximum pole length in one piece 4.0m (157”). ↔

Poles exceeding the recommended maximum distance between brackets,
will be cut into equal parts unless otherwise specified.
Pole joiners will be supplied. Internal measurement: 137mm (53/8”)
Fixing plate size: ø44mm (13/4”)

50mm (2”)

38mm (1 1 /2 ”) Tie Back Hook Drapery Arm

30mm (1 3 /16 ”) Drapery arms have been designed to work at
25mm (1”) dormer windrows, doorways & above beds.
19mm ( 3 /4 ”)

Diameter Recommended maximum Recommended curtain type for pole diameter Minimum French Pole
distance between brackets bend radius bend radius
ø19mm (3/4”) 1800mm (71”) Light to medium weight, lined & non interlined curtains R75mm (3”) n/a
ø25mm (1”) 2000mm (79”) Medium weight, lined & interlined curtains R100mm (4”) R50mm (2”)
ø30mm (13/16”) 2100mm (83”) Medium weight, lined & interlined curtains R255mm (10”) n/a
ø38mm (11/2”) 2200mm (87”) Medium to heavy weight, lined & interlined curtains R255mm (10”) n/a Projection: 29mm (11/8”) Diameter: ø25mm (1”) Draw rod length:
ø50mm (2”) 2400mm (96”) Heavy weight interlined curtains R255mm (10”) n/a Fixing plate size: W25mm (1”) x H74mm (215/16”) Fixing plate size: W34mm (15/16”) x H156mm (61/8”) 1000mm (393/8”)
ø50mm (2”) Acrylic pole􀆮 1500mm (59”) Medium weight, lined & interlined curtains R200mm (8”) n/a Custom lengths available to order

↔ Section lengths over 2.4m (94”) will incur a handling charge 􀆮 Acrylic poles should not be positioned in direct sunlight, and are not suitable for use in conservatories or outdoors
67 For full technical information, sizes and weights please download the specification guide - www.bradleycollection.com/specification-guides/ Ⓟ Not recommended for use with passing rings. 68
 ELYSIAN

E LY S I A N
Elysian bridges the gap between two ver y different aesthetics,
combining pared down modernist style with decorative sensibility.

Offered in an inspirational palette of solid and metallic finishes,

Elysian is also now available in a wider selection of sizes.

Pictured: Ø 50mm (2”) Pole • Templar • Clay - Gloss

69 70
 E LY SI A N
D E TAIL
Thoughtfully designed accessories improve functionality.
of the system without compromising the aesthetic.

S C ALE F UN C TI O N L E N GT H SHAPE

E LY S I A N
Now available in three pole diameters A range of bracket options have been designed to allow easy Elysian can be cut to any length. ↔
Passing brackets & rings allow Elysian offers a bespoke bay bending and curving service to fit
Ø30mm (1 3/ 16”) • 38mm (1 1/ 2”) • 50mm (2”). installation. All wall & ceiling brackets have a magnetic cover drapes to travel the full system length. any bay window.
Each component is carefully designed and plate to hide screw fixings. Brackets can also be supplied to
scaled to reflect the design intent. custom lengths and designs.

Pictured: Ø 50mm (2”) Pole • Halo • Platinum - Gloss

71 ↔ Supplied in sections - Maximum section per length 4.0m (157”) - Section lengths over 2.4m (94”) will incur a handling charge 72
 F I N I S H ES
An unparalleled selection of coated and plated finishes, allows Elysian to express Coat Options
emotions ranging from the sober and understated to the glamorous and flamboyant.

Matte Ⓜ Satin Ⓢ Gloss Ⓖ

Cloud ⓂⓈⒼ Barley ⓂⓈⒼ Bone ⓂⓈⒼ Cream ⓂⓈⒼ Parchment ⓂⓈⒼ

E LY S I A N
Mineral ⓂⓈⒼ Dove ⓂⓈⒼ Millstone ⓂⓈⒼ Clay ⓂⓈⒼ Cocoa ⓂⓈⒼ

Alabaster ⓂⓈⒼ Ⓖ Dusk ⓂⓈⒼ Ceramic ⓂⓈⒼ Slate ⓂⓈⒼ Flint ⓂⓈⒼ

Damson ⓂⓈⒼ Moss ⓂⓈⒼ Smoke ⓂⓈⒼ Frame Grey ⓂⓈⒼ Raven ⓂⓈⒼ

Platinum ⓈⒼ Champagne ⓈⒼ Gold ⓈⒼ Cognac ⓈⒼ Gunmetal ⓈⒼ

Pictured left to right:

Round Ø 50mm (2”) Pole • Flute • Antique Brass - Gloss

Pewter ⓈⒼ Antique Brass ⓈⒼ Bronzed ⓈⒼ Polished Nickel ⊕􀐫 Polished Brass Plate ⊕􀐫 Squat Globe • Pewter - Gloss • Templar • Bronzed - Gloss
Globe • Champagne - Gloss

Due to printing limitations colours in this brochure may not be accurate

73 Samples are available on request - www.bradleycollection.com/samples/ ⊕ A finishing charge will apply 􀐫 Longer lead-times will apply 74
 FIN ISH E S

E LY S I A N
FLUID METAL™
Technology and aesthetics meet with Fluid Metals. A first for draper y hardware,
this innovative specialist finishing technique allows authentic metal coatings
to be applied onto any substrate. Elysian designs look stunning in these new
metal coats.

Old Silver ⊕􀐫􀝧 􀉼 Old Pewter ⊕􀐫􀝧 􀉼 Old Brass ⊕􀐫􀝧 􀉼

Pictured left to right:

Round Ø 50mm (2”) Pole • Ribbed Globe • Bronze Art Light Bronze ⊕􀐫􀝧 􀉼 Bronze Art ⊕􀐫􀝧 􀉼
Cut Cr ystal Templar • Old Brass • Flute • Old Pewter
⊕ A finishing charge will apply 􀐫 Longer lead-times will apply 􀝧 Fluid Metal finishes are supplied unlacquered and will
tarnish over time, a clear lacquer may be applied on request as a custom finish
75 􀉼 Fluid Metal finishes are hand produced, finish may vary. 76
 FINIALS

E LY S I A N
Traditional styling cues have been streamlined Pictured Top: Ø 50mm (2”) • Charm • Champagne - Gloss
Halo • Gold - Gloss • Squat Globe • Bronzed - Gloss Squat Globe Flute
to suit modern living, resulting in the distinctive Cr ystal Globe • Gunmetal - Gloss • Templar • Antique Brass - Gloss
ø30mm (1 /16”) Inclusive Length 53mm (2 /16”)
3 1
ø30mm (13/16”) Inclusive Length 73mm (27/8”)
curvilinear character of Elysian. Flute • Pewter - Gloss • Globe • Platinum - Gloss
Cr ystal Templar • Cognac - Gloss ø38mm (11/2”) Inclusive Length 63mm (21/2”) ø38mm (11/2”) Inclusive Length 69mm (211/16”)
ø50mm (2”) Inclusive Length 81mm (33/16”) ø50mm (2”) Inclusive Length 114mm (41/2”)

Halo Globe Crystal Globe 􀆮 Ribbed Globe

ø30mm (13/16”) Inclusive Length 5mm (3/16”) ø30mm (13/16”) Inclusive Length 73mm (27/8”) ø30mm (13/16”) Inclusive Length 73mm (27/8”) ø30mm (13/16”) Inclusive Length 73mm (27/8”)
ø38mm (11/2”) Inclusive Length 2mm (1/16”) ø38mm (11/2”) Inclusive Length 92mm (35/8”) ø38mm (11/2”) Inclusive Length 92mm (35/8”) ø38mm (11/2”) Inclusive Length 92mm (35/8”)
ø50mm (2”) Inclusive Length 2mm ( /16”)1
ø50mm (2”) Inclusive Length 114mm (4 /2”)
1
ø50mm (2”) Inclusive Length 114mm (4 /2”) 1
ø50mm (2”) Inclusive Length 114mm (41/2”)

Charm Templar Crystal Templar 􀆮 Cut Crystal Templar 􀆮

ø30mm (1 /16”) Inclusive Length 69mm (2 /16”)
3 11
ø30mm (1 /16”) Inclusive Length 79mm (3 /8”)
3 1
ø30mm (1 /16”) Inclusive Length 79mm (3 /8”)
3 1
ø50mm (2”) Inclusive Length 119mm (411/16”)
ø38mm (1 /2”) Inclusive Length 85mm (3 /8”)
1 3
ø38mm (1 /2”) Inclusive Length 92mm (3 /8”)
1 5
ø38mm (1 /2”) Inclusive Length 92mm (3 /8”)
1 5

ø50mm (2”) Inclusive Length 117mm (45/8”) ø50mm (2”) Inclusive Length 119mm (411/16”) ø50mm (2”) Inclusive Length 119mm (411/16”)

77 For full technical information, sizes and weights please download the specification guide - www.bradleycollection.com/specification-guides/ 􀆮 Crystal Finials should not be positioned in direct sunlight 78
 S I N GL E B RACKETS D O U B L E B R AC KE T S
Side Diameter Projection from wall to pole centre Fixing plate size Side Diameter Projection from wall to pole centre Fixing plate size
ø30mm (13/16”) 100mm (4”) W40mm (19/16”) x H86mm (33/8”) Fø38mm (11/2”) F200mm (8”) W50mm (2”) x
ø38mm (11/2”) 100mm (4”) W50mm (2”) x H105mm (41/8”) Bø30mm (13/16”) B60mm (23/8”) H105mm (41/8”)
ø50mm (2”) 100mm (4”) W50mm (2”) x H105mm (41/8”)
Fø50mm (2”) F200mm (8”) W50mm (2”). x
Bø30mm (13/16”) B60mm (23/8”) H105mm (41/8”)

Mid Passing Diameter Projection from wall to pole centre Fixing plate size Mid Passing Diameter Projection from wall to pole centre Mid Fixing plate size Passing Fixing plate size
ø30mm (1 /16”)
3
100mm (4”) W86mm (3 /8”) x H40mm (1 /16”)
3 9
Fø38mm (1 /2”)
1
F200mm (8”) W105mm (4 /8”) x
1
W105mm (41/8”) x.
ø38mm (11/2”) 100mm (4”) W105mm (41/8”) x H50mm (2”) Bø30mm (13/16”) B60mm (23/8”) H50mm (2”) H73mm (27/8”)
ø50mm (2”) W105mm (41/8”) x H50mm (2”) W105mm (41/8”) x W105mm (41/8”) x
Fø50mm (2”) F200mm (8”)
Bø30mm (13/16”) B60mm (23/8”)
H50mm (2”) H73mm (27/8”)

Ceiling Passing Diameter Drop from ceiling to pole centre Fixing plate size
ø30mm (1 /16”)
3
100mm (4”) W86mm (33/8”) x H40mm (19/16”)
ø38mm (1 /2”)1
100mm (4”) W105mm (41/8”) x H50mm (2”)
ø50mm (2”) 100mm (4”) W105mm (41/8”) x H50mm (2”)

E LY S I A N
R E C E S S B RACKETS C U ST O M B R AC K E T S
Recess Diameter Depth off wall Fixing plate size Special projection brackets and specialist designs can
with ring stop be produced for awkward or unusual installations.
ø30mm (13/16”) 10mm (3/8”) ø40mm (19/16”)
ø38mm (11/2”) 12mm (1/2”) ø49mm (115/16”)
ø50mm (2”) 15mm (9/16”) ø64mm (21/2”)

A D J US TAB L E B RACKET S
Custom Projection Custom Fixing Plate Uplift Angled Brackets
Side Diameter Projection from wall to pole centre Fixing plate size
Specify the exact Relevant where space is Helps negotiate cornice The solution for tight and
ø30mm (13/16”) Min.100mm (4”) Max.170mm (611/16”) W40mm (19/16”) x H86mm (33/8”) projection needed. restricted or weight is a and similar architectural awkward locations.
ø38mm (1 /2”)1
Min.100mm (4”) Max.170mm (611/16”) W50mm (2”) x H105mm (41/8”) concern. features.
ø50mm (2”) Min.100mm (4”) Max.170mm (611/16”) W50mm (2”) x H105mm (41/8”)

Mid Passing Diameter Projection from wall to pole centre Fixing plate size
ø30mm (13/16”) Min.100mm (4”) Max.170mm (611/16”) W86mm (33/8”) x H40mm (19/16”)
ø38mm (11/2”) Min.100mm (4”) Max.170mm (611/16”) W105mm (41/8”) x H50mm (2”)
ø50mm (2”) Min.100mm (4”) Max.170mm (611/16”) W105mm (41/8”) x H50mm (2”)

79 For full technical information, sizes and weights please download the specification guide - www.bradleycollection.com/specification-guides/ 80
 LI NE D R IN G S AC C E SSO R IE S
Ring Passing Diameter Ring drop from top of pole to bottom of ringlet Ombres Draw Rods Ⓟ
Ring
ø30mm (13/16”) 51mm (2”)
Fine Standard
ø38mm (11/2”) 66mm (25/8)
ø50mm (2”) 80mm (31/8”)

Internal projection from wall: 150mm (77/8”)

Fixing plate size: ø68mm (211/16”)

POLES
Poles are cut, bent and curved to suit individual requirements. Hold back

E LY S I A N
When calculating the length of your pole, remember to allow tolerance
beyond the width of the frame for the curtains to draw back to the edge of the window.

Maximum pole length in one piece 4.0m (157”). ↔

Poles exceeding the recommended maximum distance between brackets,
will be cut into equal parts unless otherwise specified.
Pole joiners will be supplied.

Internal measurement: 137mm (53/8”)

Fixing plate size: ø44mm (13/4”)

50mm (2”)

38mm (1 1 /2 ”)
30mm (1 3 /16 ”) Tie Back Hook

Diameter Recommended maximum Recommended curtain type for pole diameter Minimum
distance between brackets bend radius
ø30mm (13/16”) 2100mm (83”) Medium weight, lined & interlined curtains R255mm (10”)
ø38mm (11/2”) 2200mm (87”) Medium to heavy weight, lined & interlined curtains R255mm (10”)
ø50mm (2”) 2400mm (96”) Heavy weight interlined curtains R255mm (10”)
Projection: 29mm (11/8”) Draw rod length:
Fixing plate size: W25mm (1”) x H74mm (215/16”) 1000mm (393/8”)
Custom lengths available to order

↔ Section lengths over 2.4m (94”) will incur a handling charge

81 For full technical information, sizes and weights please download the specification guide - www.bradleycollection.com/specification-guides/ Ⓟ Not recommended for use with passing rings. 82
 CONTOUR

CONTOUR
This collection has poise and a clear sense of purpose.

Natural material but streamlined, matte and minimalist.

Truly original, Contour is the wood pole re-imagined.

Pictured: Ø 50mm (2”) Wood Pole • Oak • Disc • Burnished Silver

83 84
 C O N T OUR M AT E R I A L S F I N IS H
Contour is available in a selection of fine woods, Steel components are available in a choice of Fluid Metal
presented in a contemporar y low sheen finish. finishes, all of which may be mixed with natural wood.
Poles may also be specified in Fluid Metal coats.

I NNOVATION FLAIR L E N GT H D E TAIL

CONTOUR
The 'almost invisible' brackets of Contour are a design Contour offers the option of linked rings for a modern, Poles can be cut to any length. ↔ The optional Bracket Band and Thumb Wheel may
breakthrough. They deliver the ultimate streamlined look wave-style heading. Innovative passing bracket & ring system allows drapes to be specified as a design accent.
with no compromise on strength. travel seamlessly along the full system length.

85 ↔ Supplied in sections - Maximum section per length 2.4m (94”) 86

 FIN ISH E S
With modern design sensibility to the fore, Contour is presented in
a selection of high-quality woods with a low-level sheen as standard.

Poles and complementar y metal components are available in an

exclusive choice of luxur y Fluid Metal finishes.

FLUID METAL™
Fluid Metals are derived from leading edge finishing technology, allowing true metal coatings to be
applied to any substrate. These luxurious finishes are the prefect treatment for this esoteric collection,
although standard finishes are available on request.

CONTOUR
Old Silver 􀐫􀝧 􀉼 Old Pewter 􀐫􀝧 􀉼 Old Brass 􀐫􀝧 􀉼 Light Bronze 􀐫􀝧 􀉼 Bronze Art 􀐫􀝧 􀉼

Burnished Silver ⊕􀐫􀝧 􀉼

WOOD POLE & FINIAL FINISHES

Other wood stained finishes are available on request.

Pictured left to right:

Ø 50mm (2”) • Ribbed Ball • Old Pewter

Ø 50mm (2”) Wood Pole • Cherr y • Squat Ball • Bronze Art Ash Oak Cherry Walnut Black Ash Stain Over Ash
Ø 50mm (2”) Wood Pole • Ash • Disc • Old Brass
⊕ A finishing charge will apply 􀐫 Longer lead-times will apply
􀝧 Fluid Metal finishes are supplied unlacquered and will tarnish over time, a clear lacquer may be applied on request as a custom finish 􀉼 Fluid Metal finishes are hand produced, finish may vary.
87 Due to printing limitations colours in this brochure may not be accurate. Samples are available on request - www.bradleycollection.com/samples/ 88
 FINIALS
With suitable deference to
period styling, Contour sharpens
and cleans traditional motifs to
suit a more modern idiom.

Pictured left to right:

Ø 50mm (2”) Wood Pole • Wooden Ribbed Ball • Walnut & Bronze Art
Ø 50mm (2”) Wood Pole • Wooden Ball • Ash & Burnished Silver
Ø 50mm (2”) Wood Pole • Wooden Squat Ball • Oak & Old Brass

CONTOUR
Disc Squat Ball Wooden Squat Ball Ball Wooden Ball Ribbed Ball Wooden Ribbed Ball
Inclusive Length 7mm (1/4”) Inclusive Length 92mm (35/8”) Inclusive Length 92mm (35/8”) Inclusive Length 118mm (45/8”) Inclusive Length 118mm (45/8”) Inclusive Length 118mm (45/8”) Inclusive Length 118mm (45/8”)
Finished in Burnished Silver • Black Ash Finished in Bronze Art • Cherry Finished in Burnished Silver • Oak Finished in Light Bronze Finished in Bronze Art • Ash Finished in Old Pewter Finished in Old Brass • Walnut

89 For full technical information, sizes and weights please download the specification guide - www.bradleycollection.com/specification-guides/ 90
 S I N GL E B RACKETS R IN G S
Side Diameter Projection from wall to pole centre Fixing plate size Superbly engineered rings are available in both
hoop and passing ring styles.
ø50mm (2”) 100mm (4”) W52mm (21/16”) x H104mm (41/8”)

For a modern wave form heading, linked rings are

also available.

Mid Passing Diameter Projection from wall to pole centre Fixing plate size
ø50mm (2”) 100mm (4”) W104mm (41/8”) x H52mm (21/16”)

Ring Linked Ring 􀉣

Ceiling Passing Diameter Drop from ceiling to pole centre Fixing plate size
ø50mm (2”) 100mm (4”) W104mm (41/8”) x H52mm (21/16”) Ring Passing Ring Diameter Ring drop Linked Ring Pitch
ø50mm (2”) 81mm (3 /16”)
3
80mm (31/8”)
from top of pole to bottom of ringlet

Optional Bracket Band & Thumb wheel

The Contour bracket is designed to be totally
unintrusive. The Bracket Band and Thumb Wheel
allow subtle extra detailing to be added.
L IN E D P O L E
Contour incorporates a low friction liner to allow smooth
operation of rings.

CONTOUR
Diameter
Poles are cut, bent and curved to suit individual requirements.
ø50mm (2”)
When calculating the length of your pole, remember to allow
tolerance beyond the width of the frame for the curtains to draw
50mm (2”) Wood
back to the edge of the window.

Maximum pole length in one piece 2.4m (96”).

Poles exceeding the recommended maximum distance between
C US TO M B RACKETS brackets, will be cut into equal parts unless otherwise specified.
Pole joiners will be supplied.

Contour can be customised to suit virtually any window.

Diameter Recommended maximum distance between brackets Recommended curtain type Minimum bend radius
ø50mm (2”) Wood 2100mm (82.5”) Heavy weight interlined curtains R200mm (8”)

􀋦| E L E C T R IC WO O D P O L E S
Custom Projection Custom Fixing Plate Uplift Angled Brackets
Specify the exact projection Relevant where space is restricted Helps negotiate cornice and The solution for tight and All the virtues of Contour can be combined with the luxur y and convenience of electric.
needed. or weight is a concern. similar architectural features. awkward locations. Contour designs, materials and finishes are all available as electric curtain pole options. Visit www.bradleycollection.com/electric

91 For full technical information, sizes and weights please download the specification guide - www.bradleycollection.com/specification-guides/ 􀉣 Linked ring cord will be visible, Choice of cord colour available. 92
 􀋦|ECLIPSE

􀋦|E C L I P S E
Peerless and opulent, this collection truly has no rival.

A rare, luxurious aesthetic and freedom of

expression in design are balanced with the
final word in functionality and control.

The world’s finest.

Pictured: Ø 38mm (1 1/ 2”) Coverpole • Standard Stud • Brass Toned

Project by: Gallagher London - London SW7 - UK

93 94
 􀋦| E C L I PS E

L E N GT H BE NT TO S HAP E
Poles can be supplied to any length ↔ , subject to maximum A bespoke bay bending service is available on all diameters to
weight loadings of the selected motorised system. allow the perfect shaped pole to fit any bay window.

L EADING MOTOR OP TIONS

Eclipse may be specified with your choice from the leading
motorised systems. This provides power and control options
ranging from standalone batter y powered systems to fully
integrated home automation solutions.

For Double pole systems, a hand drawn rear pole may

be specified if preferred.

S C AL E D ETAI LI N G F U N CT I O N M ODER N HEADINGS

Eclipse poles are available in two pole diameters, The secret of any design is in the detail. Eclipse now includes a A range of bracket options have been designed to ensure simple The choice of motor systems means that modern headings
Ø38mm (1 1/ 2”) • 50mm (2”). Finial designs are carefully complementar y finish to nylon end housings, for a harmonious installation, including flush fit ceiling brackets. can be accommodated, with both Wave ® and Ripplefold ®
scaled to maintain the system aesthetic. tonal effect. styles available.

􀋦|E C L I P S E
95 ↔ Supplied in sections - Maximum section length 2.9m (114”) 96
 FINISH E S Coat Options

All poles and components may be specified in this stunning palette

of colours and finishes, with a choice of coat options throughout.

Matte Ⓜ Satin Ⓢ Gloss Ⓖ

Cloud ⓂⓈⒼ Barley ⓂⓈⒼ Bone ⓂⓈⒼ Cream ⓂⓈⒼ Parchment ⓂⓈⒼ

A brushed stainless steel base gives an edgy feel, with specially developed tints providing a change of mood
to suit the needs of the project.

Mineral ⓂⓈⒼ Dove ⓂⓈⒼ Millstone ⓂⓈⒼ Clay ⓂⓈⒼ Cocoa ⓂⓈⒼ

Brushed Stainless Brass Tint ⊕􀐫 Bronze Tint ⊕􀐫 Carbon Tint ⊕􀐫

Alabaster ⓂⓈⒼ Dusk ⓂⓈⒼ Ceramic ⓂⓈⒼ Slate ⓂⓈⒼ Flint ⓂⓈⒼ

􀋦| E C L I P S E
The beauty of the mild steel base shines through with these special translucent finishes.

Damson ⓂⓈⒼ Moss ⓂⓈⒼ Smoke ⓂⓈⒼ Frame Grey ⓂⓈⒼ Raven ⓂⓈⒼ

Polished Natural Steel Brass Toned Matte Brass Toned Oil Rubbed
Platinum ⓈⒼ Champagne ⓈⒼ Gold ⓈⒼ Cognac ⓈⒼ Gunmetal ⓈⒼ

Waxed
Pewter ⓈⒼ Antique Brass ⓈⒼ Bronzed ⓈⒼ

Due to printing limitations colours in this brochure may not be accurate

97 Samples are available on request - www.bradleycollection.com/samples/ ⊕ A finishing charge will apply 􀐫 Longer lead-times will apply 98
 FIN ISH E S

FLUID METAL™
Leading edge technology allows authentic metal coats to be applied to any

􀋦|E C L I P S E
substrate, which can then be worked and aged for a truly luxurious result.

Old Silver ⊕􀐫􀝧 􀉼 Old Pewter ⊕􀐫􀝧 􀉼 Old Brass ⊕􀐫􀝧 􀉼

Light Bronze ⊕􀐫􀝧 􀉼 Bronze Art ⊕􀐫􀝧 􀉼

Pictured: Ø 38mm (1 1/ 2”) Coverpole - Somfy • Contrast Stud • Light Bronze
⊕ A finishing charge will apply 􀐫 Longer lead-times will apply 􀝧 Fluid Metal finishes are supplied unlacquered and will tar-
nish over time, a clear lacquer may be applied on request as a custom finish
99 Due to printing limitations colours in this brochure may not be accurate. Samples are available on request - www.bradleycollection.com/samples/ 􀉼 Fluid Metal finishes are hand produced, finish may vary. 100
 FINIA L S
This design edit provides a solution for any project.
Sharp, geometric designs give Eclipse a thoroughly
modern persona, while rounded design cues offer a
more classic feel, albeit still expressed with a more
contemporar y hand.

Pictured: Ø 38mm (1 1/ 2”) Coverpole - Silent Gliss • Faceted Disc • Brushed Stainless

􀋦|E C L I P S E
Flush End Cap ◉ - Supplied as standard Standard Stud Button Stud Ball & Collar
ø38mm (1 /2”) Inclusive Length 6mm ( /4”)
1 1
ø38mm (1 /2”) Inclusive Length 9mm ( /8”)
1 3
ø38mm (1 /2”) Inclusive Length 58mm (2 /16”)
1 5
ø38mm (11/2”) Inclusive Length 86mm (33/8”)
ø50mm (2”) Inclusive Length 6mm ( /4”) 1
ø50mm (2”) Inclusive Length 10mm ( /8”)
3
ø50mm (2”) Inclusive Length 69mm (2 /16”)
11
ø50mm (2”) Inclusive Length 106mm (43/16”)

Contrast Stud Large Disc Faceted Disc Ball

ø38mm (11/2”) Inclusive Length 20mm (13/16”) ø38mm (11/2”) Inclusive Length 7mm (1/4”) ø38mm (11/2”) Inclusive Length 45mm (13/4”) ø38mm (11/2”) Inclusive Length 86mm (33/8”)
ø50mm (2”) Inclusive Length 23mm (7/8”) ø50mm (2”) Inclusive Length 8mm (5/16”) ø50mm (2”) Inclusive Length 59mm (25/16”) ø50mm (2”) Inclusive Length 106mm (43/16”)

◉ Please note that if this option is selected finials cannot be added at a later date.
101 For full technical information, sizes and weights please download the specification guide - www.bradleycollection.com/specification-guides/ 102
 SI N GL E B RACKETS
Side Diameter Projection from wall to track centre Fixing plate size
ø38mm (11/2”) 100mm (4”) W52mm (21/16”) x H104mm (41/8”)
ø50mm (2”) 100mm (4”) W52mm (21/16”) x H104mm (41/8”)

Mid Mid - Joining Diameter Projection from wall to track centre Fixing plate size
ø38mm (11/2”) 100mm (4”) W104mm (41/8”) x H52mm (21/16”)
ø50mm (2”) 100mm (4”) W104mm (41/8”) x H52mm (21/16”)

Flush Flush - Joining Diameter Drop from ceiling to top of pole Fixing plate size
ø38mm (11/2”) 3mm (1/8”) W70mm (23/4”) x H34mm (15/16”)
ø50mm (2”) 3mm (1/8”) W70mm (23/4”) x H34mm (15/16”)

Pictured: F Ø 38mm (1 1/ 2”) Coverpole - Lutron • Contrast Stud B Ø 38mm (1 1/ 2”) Coverpole - Lutron • Endcap • Flint

D O U BL E B RACKETS C U ST O M B R AC KE T S
Side Diameter Projection from wall to track centre Fixing plate size Eclipse can be customised to suit virtually any window.
Fø38mm (11/2”) Bø38mm (11/2”) F160mm (65/16”) B 60mm (23/8”) W52mm (21/16”) x H104mm (41/8”)

􀋦|E C L I P S E
Fø38mm (11/2”) B Uncovered track F160mm (65/16”) B 60mm (23/8”) W52mm (21/16”) x H104mm (41/8”)
Fø50mm (2”) Bø50mm (2”) F160mm (65/16”) B 60mm (23/8”) W52mm (21/16”) x H104mm (41/8”)
Fø50mm (2”) Bø38mm (11/2”) F160mm (65/16”) B 60mm (23/8”) W52mm (21/16”) x H104mm (41/8”)
Fø50mm (2”) B Uncovered track F160mm (65/16”) B 60mm (23/8”) W52mm (21/16”) x H104mm (41/8”)

Custom Projection Custom Fixing Plate Uplift Dropdown Ceiling Angled Brackets
Specify the exact Relevant where space is Helps negotiate cornice Specify exact projection The solution for tight and
projection needed. restricted or weight is a and similar architectural required from ceiling. awkward locations.
Mid Mid - Joining Diameter Projection from wall to track centre Fixing plate size concern. features.
Fø38mm (11/2”) Bø38mm (11/2”) F160mm (65/16”) B 60mm (23/8”) W104mm (41/8”) x H52mm (21/16”)
Fø38mm (11/2”) B Uncovered track F160mm (65/16”) B 60mm (23/8”) W104mm (41/8”) x H52mm (21/16”)
Fø50mm (2”)
Fø50mm (2”)
Bø50mm (2”)
Bø38mm (11/2”)
F160mm (65/16”)
F160mm (65/16”)
B 60mm (23/8”)
B 60mm (23/8”)
W104mm (41/8”) x H52mm (21/16”)
W104mm (41/8”) x H52mm (21/16”)
􀋦| E L E C T R IC D R AP E RY H AR D WA R E
Fø50mm (2”) B Uncovered track F160mm (65/16”) B 60mm (23/8”) W104mm (41/8”) x H52mm (21/16”)
For the full range of Electric poles and tracks visit www.bradleycollection.com/electric

103 For full technical information, sizes and weights please download the specification guide - www.bradleycollection.com/specification-guides/ 104
 S I L E N T G L ISS ®
5600
Straight poles maximum length 15 Metres (49ft) ↔ Touch and go manual operation
Bespoke bay service System allows manual operation during power failure
Standard gliders and rollers & Wave ® gliders and rollers Quiet motors, noise level at 300mm (1’) <36dBA
DC & AC hidden motor options Wireless remote control, app control or home automation integration

M O TOR O PTIO NS GLIDING OP TIONS

9060 Motor 9060 Motor
with radio module Silent Gliss 5600 is available in 4 gliding options: Standard Gliders & Rollers, or Wave ® Gliders & Rollers to be used with Wave ® header tape.

Gliders Rollers⌘ Wave ® gliders Wave ® rollers⌘

Mains powered motor option. Mains powered motor, with radio module for use.
Requires professional instalation. with remote control options. Drop from bottom of track: Drop from bottom of track: Drop from bottom of track: Drop from bottom of track:
Suitable for systems up to 15M (49ft). Requires professional instalation. 20mm (13/16”) 20mm (13/16”) 20mm (13/16”) 20mm (13/16”)
Suitable for systems up to 15M (49ft). Wave® Pitch: Wave® Pitch:
80mm (31/8”) 80mm (31/8”)
Smart Expansion ModuleⓈ also available.

P OLE S
CO NTRO L O PTIO NS Poles are cut and bent to suit individual requirements. When calculating the length of your pole, remember to allow tolerance beyond the

􀋦|E C L I P S E
width of the frame for the curtains to stack back to the edge of the window.
Remote Control App Control Automation systems
Move & Smart Maximum Coverpole length in one piece 2.9m (114”) ↔ . Poles exceeding the maximum length will be cut into equal parts unless otherwise
specified. A joining bracket will need to be specified.

Single & Multi-channel hand held remote control The system can be controlled with the Silent Gliss The system can also be intergrated with all major
MoveⓂ app to allow control on smart devices. home control systems.Ⓐ
Size Maximum distance between brackets Minimum bend radius
options available.
ø38mm (11/2”)
Or via the Smart Ⓢ system allowing two way
1500mm (60”) R275mm (1013/16”)
integration with all major home control systems ø50mm 1500mm (60”) R275mm (1013/16”)

Ⓜ Move server set 9960 is required for use with this app Ⓢ Smart only available in United Kingdom, requires Smart Expansion Module Ⓐ Specialist support & addtional components required
105 Weight restrictions apply. For full technical information please refer to the specification guide. www.bradleycollection.com/specification-guides/ ↔ Supplied in sections - maximum section length 2.9m (9.5ft) ⌘ Supplied as standard on systems over 2.9m (9.5ft) with single stack curtains 106
 SOMFY®
G LYDEA, IR ISMO & MOVEL I T E
Straight poles maximum length 12 Metres (39ft) ↔
Bespoke bay service 􀵏 System allows manual operation during power failure
Standard roller, Ripple rollers and Ripplefold ® rollers Quiet motors, noise level at 1000mm (3’) <44dBA
Mains & Batter y powered motor options Fully compatible with Somfy RTS
Touch and go manual operation Wireless remote control, app control or home automation integration

M O TOR O PTIO NS GLIDING OP TIONS

Glydea Ultra 60e Irismo 45 WF Movelite 35 Movelite 35 WF
Somfy is available in 3 gliding options: Standard Rollers, Ripple Rollers, to be used with wave-style header tape.
Or Ripplefold ® Rollers to be used with Graber or Kirsch snap header tape.

Rollers Ripple rollers Ripplefold ® rollers

WT • DCT • RTS RTS WT • DCT • RTS RTS

Mains powered motor. Battery powered motor, with Mains powered motor. Battery powered motor, with Drop from bottom of track: Drop from bottom of track: Drop from bottom of track:
RTS includes integrated radio receiver integrated radio receiver for use RTS includes integrated radio receiver integrated radio receiver for use 20mm (13/16”) 20mm (13/16”) 20mm (13/16”)
for use with remote control options. with remote control options. for use with remote control options. with remote control options. Ripple Pitch: Ripplefold ® Fullness:
Requires professional instalation. Single charge lasts up to six months. Requires professional instalation. Single charge lasts up to four 80mm (31/8”) 80% •100% •120%
Suitable for systems up to 12M (39ft). Requires no pre-wiring. Suitable for systems up to 10M (33ft). months.
Suitable for systems up to 10M (33ft). Requires no pre-wiring.
Suitable for systems up to 6M (19ft)*.
P OLE S
CO NTRO L O PTIO NS Poles are cut and bent to suit individual requirements. When calculating the length of your pole, remember to allow tolerance beyond the

􀋦|E C L I P S E
width of the frame for the curtains to stack back to the edge of the window.
Remote Control App Control Automation systems
Maximum Coverpole length in one piece 2.9m (114”) ↔ . Poles exceeding the maximum length will be cut into equal parts unless otherwise
specified. A joining bracket will need to be specified.

Single channel & Multi-channel hand held The system can be controlled with the Somfy The system can also be intergrated with all major
Size Maximum distance between brackets Minimum bend radius
remote control options available. Tahoma app or through smart devices & Amazon home control systems.Ⓐ
ø38mm (11/2”) 1500mm (60”) R275mm (1013/16”)
Alexa.
ø50mm 1500mm (60”) R275mm (1013/16”)

􀵏 Movelite35 WF is not suitable for bay bends Ⓐ Specialist support & addtional components required
107 Weight restrictions apply. For full technical information please refer to the specification guide. www.bradleycollection.com/specification-guides/ ↔ Supplied in sections - maximum section length 2.9m (9.5ft) 108
 LU TRO N ®
S I VOIA
Straight poles maximum length 9 Metres (29.5ft) ↔ Three motor ratings for differing curtain weights
Bespoke bay service Quiet motors, noise level at 1000mm (3’) <44dBA
Standard roller and Ripplefold ® rollers Fully compatible with Lutron ® QS Home Automation systems
Low voltage concealed motors Wireless remote control, app control or home automation integration

M O TOR O PTIO NS GLIDING OP TIONS

Motor Motor
with radio dongle Lutron can be supplied with 2 gliding options: Standard Rollers, or Ripplefold ® Rollers to be used with Graber or Kirsch snap header tape.

Rollers Ripplefold ® rollers

D105 • D145 • D175 D105 • D145 • D175

Mains powered motor options Mains powered motor options , with radio Drop from bottom of track: Drop from bottom of track:
.Requires professional instalation. dongle for use with remote control options. 12mm (7/16”) 20mm (13/16”)
Suitable for systems up to 15M (49ft). Requires professional instalation. Ripplefold ® Fullness:
Suitable for systems up to 15M (49ft). 80% •100% •120%

P OLE S
CO NTRO L O PTIO NS Poles are cut and bent to suit individual requirements. When calculating the length of your pole, remember to allow tolerance beyond the

􀋦|E C L I P S E
width of the frame for the curtains to stack back to the edge of the window.
Remote Control App Control Automation systems
RA2 Select Hub Maximum Coverpole length in one piece 2.9m (114”) ↔ . Poles exceeding the maximum length will be cut into equal parts unless otherwise
specified. A joining bracket will need to be specified.

Single & Multi-channel hand held remote control The system can be controlled with the Lutron app The system can also be intergrated with all major
home control systems.Ⓐ
Size Maximum distance between brackets Minimum bend radius
options available. or through smart devices & Amazon Alexa.
ø38mm (11/2”) 1500mm (60”) R275mm (1013/16”)
ø50mm 1500mm (60”) R275mm (1013/16”)

Ⓐ Specialist support & addtional components required

109 Weight restrictions apply. For full technical information please refer to the specification guide. www.bradleycollection.com/specification-guides/ ↔ Supplied in sections - maximum section length 2.9m (9.5ft) 110