Profile-T
DA - Offline 2D / 3D
software solution for
production preparation
Integrated solutions
The DA-Offline range offers integrated
solutions for offline preparation,
optimizing machine efficiency.
DA-Offline software maximises Special operations like hemming bends
machine efficiency and productivity of and bumping are supported graphically,
your press brakes. The Profile-T enabling a complete preview of the
software facilitates offline programming bending process.
and simulation of the bending process.
Production preparation, feasibility Profile-T features:
studies and tooling verification, operator • Full scale offline programming
training, adding notes for production
and many other functions can be carried • Graphical product programming
out offline. and bend sequence generation
• Feasibility studies and production
The Profile-T software offers advanced preparation
programming in 2D / 3D in line with
the DA-Touch controller software. The • 2D/3D automatic bend sequence
steps from the start of programming to calculation
the desired program including its • Collision detection
transfer to the control are clearly
embedded in the user interface.
• DXF tool and product import
• 3D CAD product import
Programming the product graphically • Product sharing over Windows
shows a true scale representation of networking with press brake CNC
the intended product. Realistic product
visualisation gives feedback on • Machine setup preparation
feasibility, collisions, required tools and including print functionality
tool adapters for production. • Production time calculation
• DXF-out incl. bend allowance
Everything under control
Specifications Profile-T
Product configuration
Standard
- 2D or 3D programming version
- 3D machine representation
- X1-X2 angle programming
- 3D finger view
- DA-Touch familiar user interface
-
DXF import function (products and tools)
-
3D CAD import function (Profile-T3D only)
Ordering information
- Profile-T2D
2D offline programming software
- Profile-T3D
3D offline programming software
Technical specification
Programming functions Tooling Graphical functions
- Alphanumeric product naming - Graphical tool configuration - Print of CNC program incl.:
- 2D/3D real-scale product - Multiple tool station setups ○ Product data
programming and visualisation - Tool segmentation calculation and ○ Bend sequence
- Automatic bend sequence visualization ○ Tool setup
calculation in 2D and 3D - Alphanumeric tool identification -
DXF product output (contour and bendlines)
- Easy swap and move of bends in - Tool advisor
graphical bend sequence - Graphical tool programming Miscellaneous
- Hemming bend programming - Tool adapter support - User selectable dialogue
- Graphical product and tool - Hemming tools languages
selection - Radius tools - Multiple machine support
- Special tools - Integrated help functions
- Programmable material properties - DXF tool import
- Bend allowance table
- Programmable axis speed Computed functions System requirements
- Number of steps up to 99 - Tooling safety zones - Windows 7 / Windows 8
- Step repeat, up to 99. - Press force - Windows 10
- Search filter for products and tools - Bend allowance - USB port
- Millimetres/Inches, kN/Ton - Crowning adjustment
selection - Developed length
- Bottoming force
- Product notes in text as well - Hemming force
as .PDF - Auto bumping calculation
- DXF product import function
- 3D CAD, STEP and IGES product
import (Profile-T3D only)
8600-901/C
T www.delem.com
T: +31(0)40 2552969, F: +31(0)40 2551923
Everything under control
