AD136/T/TI/086TI MARINE GENERATOR

Production tolerance : ± 3%
Model Auxiliary
Units
Spec. AD136 AD136T AD136TI AD086TI
4 cycle, in line, direct-
4 cycle, in line, direct-
4 cycle, in line, direct- 4 cycle, in line, direct- injection24, water
injection, water cooled
Engine type injection, water cooled injection, water cooled cooled
with Wet-turbo charger
naturally aspirated with turbo charger with turbo charger &
& inter-cooler
inter-cooler
105(77)/1,500 145(107)/1,500 157(115)/1,500 205(151) /1,500
50 Hz
Rating output PS(kW) (AD136F) (AD136TF) (AD136TIF) (AD086TIF)
(B.H.P) / rpm 126(93)/1,800 170(125)/1,800 188(138)/1,800 253(186) /1,800
60 Hz
(AD136S) (AD136TS) (AD136TIS) (AD086TIS)
Displacement cc 8,071
Cyl. No. – bore(φ) x stroke mm 6 - Φ111 x 139
Valve clearance at cold mm 0.3 / 0.3
Low idling rpm rpm 800 ± 50
Mechanical governor : 1575 (52.5 Hz) / 1890(63Hz),
No load max. rpm rpm
Electric governor : 1500 (50 Hz) / 1800(60Hz)
Mean effective press. (Initial ) ㎏/㎠ 7.81 / 7.81 10.78 / 10.53 11.65 / 11.65 15.24 / 15.67
Mean piston speed m/sec. 6.95 / 8.34
Compression ratio 17.6 16.7
Comp. Press. (at 200 rpm) ㎏/㎠ About 28 (Initial condition)
Governor type of inj. pump Electric Governor
Fuel consumption g/PS.h 160 / 160 153 / 155 153 / 153 150 / 151
liter/h 20 / 24 27 / 32 29 / 34 37 / 46
Injection timing (B.T.D.C) deg. 22° ± 1° 18° ± 1° 14° ± 1° 15° ± 1°
Inj. nozzle opening press. ㎏/㎠ 224
Starting system Electric Starting by starter motor
Starter motor capacity V- kW 24 V – 4.5
Alternator capacity V- A 24 V – 80
Battery V- Ah 24V – 100
Cooling system Indirect cooling by sea water with heat exchanger
Cooling water capacity lit Max. : 25 , Min. : 23
Fresh water pump type Centrifugal type, driven by V- belt
Sea water pump type Rubber impeller type driven by gear
Pan
Lub. Oil lit Max : 23, Min : 17 ( Engine total : 25)
capacity
(Engine)
Pressure ㎏/㎠ Full : 3.5, Idle: 1.2
Revolution of Crankshaft Counter clockwise viewed from Flywheel side
Engine size (L x W x H)
mm 1,182 x 770 x 925 1,182 x 770 x 925 1,182 x 825 x 925 1,182 x 825 x 962
(Except reduction gear)
Engine dry weight
kg 735 748 773 790
(Except reduction gear)

※ Specifications are subject to change without prior notice.

Production tolerance : ± 3%

Model Emergency
Units
Spec. AD136TI AD086TI

4 cycle, in line, direct-injection, water cooled 4 cycle, in line, direct-injection, water cooled
Engine type with turbo charger & inter-cooler with wet-turbo charger & inter-cooler

Rating output PS(kW) 188(138)/1,800 253(186) /1,800

Displacement cc 8,071
Cyl. No. – bore(φ) x stroke mm 6 - Φ111 x 139
Valve clearance at cold mm 0.3 / 0.3
Low idling rpm rpm 800 ± 50
Mechanical governor : 1575 (52.5 Hz) / 1890(63Hz),
No load max. rpm rpm
Electric governor : 1500 (50 Hz) / 1800(60Hz)
Mean effective press. (Initial ) ㎏/㎠ 11.65 / 11.65 15.24 / 15.67
Mean piston speed m/sec. 6.95 / 8.34
Compression ratio 17.6 16.7
Comp. Press. (at 200 rpm) ㎏/㎠ About 28 (Initial condition)
Governor type of inj. pump Electric Governor
Fuel consumption g/PS.h 153 151
liter/h 34 46
Injection timing (B.T.D.C) deg. 14° ± 1° 15° ± 1°
Inj. nozzle opening press. ㎏/㎠ 224
Starting system Electric Starting by starter motor
Starter motor capacity V- kW 24 V – 4.5
Alternator capacity V- A 24 V – 80
Battery V- Ah 24V – 100
Cooling system Indirect cooling by sea water with heat exchanger
Cooling water capacity lit Max. : 25 , Min. : 23
Fresh water pump type Centrifugal type, driven by V- belt
Sea water pump type Rubber impeller type driven by gear
Pan
Lub. Oil lit Max : 23, Min : 17 ( Engine total : 25)
capacity
(Engine)
Pressure ㎏/㎠ Full : 3.5, Idle: 1.2
Revolution of Crankshaft Counter clockwise viewed from Flywheel side
Engine size (L x W x H)
mm 1,182 x 825 x 925 1,182 x 825 x 962
(Except reduction gear)
Engine dry weight
kg 773 790
(Except reduction gear)

※ Specifications are subject to change without prior notice.