SSB-840-05
4107 9507 40.03
Page 1 of 2
22 August 2016
Series B Medical Gas Outlet
Medaes Pin Index Key Style
SPECIFICATION
Medæs Diamond Medical Gas Wall Outlet Gas service identification is affixed to the inlet tube and the face
The pin index medical gas outlets are gas specific for the services of the rough-in plate. A secondary valve is installed in the outlet
indicated and accept only corresponding pin index adapters. block of the rough-in assembly (except vacuum and WAGD) for
The outlets are UL listed, CSA certified, and are fully compliant both pressure testing and preventing gas flow when the latch
with the latest edition of NFPA 99. All outlets are 100% tested for valve assembly is removed for service.
flow, leaks and connector attachment. The outlets are cleaned The outlet block contains a double seal to prevent gas leakage
for oxygen service in the manufacturing process. The outlets are between the rough-in and latch valve assemblies after the wall
made in the U.S.A. is finished. Outlets using a single o-ring seal are not acceptable.
Outlet Design Latch Valve Assembly
A complete medical gas outlet consists of a gas specific rough-in The latch valve assembly includes a captured o-ring seal primary
assembly for installation before the wall or console is completed. valve, is gas specific for the labeled service, and accepts only
A matching gas specific latch valve assembly and trim plate are hose and apparatus with corresponding pin index adapters.
installed after the finish is complete. The latch valve assembly is indexed to the corresponding
Rough-in Assembly rough in assembly to avoid accidental cross connection and self
adjusts up to 3/4" (1.9 cm) to allow for variation in finished wall
The rough-in assembly is of modular design and includes a gas
thickness from 1/2" (12.5 mm) up to 1-1/4" (3.175 cm).
specific 16 gauge steel mounting plate. Wall versions permit
on site ganging of multiple outlets, in any order, on 5" (12.7cm) Trim Options
centerline spacing. A 3/8" (9.5 mm) high metal flange around the Either a die cast, light gray, epoxy powder-coated trim plate or
outlet opening provides a plaster barrier. A temporary cover a smaller plastic trim plate can be provided to trim each outlet.
is provided to keep debris out of the outlet during installation. A hook plate with a retractable arm can also be provided to
Console rough-ins fit standard electrical box cutouts and screw trim each outlet. The die cast plate and hook plate are designed
locations. specifically to fill the space between adjacent outlets. The finish
A machined brass outlet block is permanently attached to the of the hook plate is treated with Biomaster, an additive that has
rough-in plate to permit the 1/2" OD (3/8" nominal), type K been shown to reduce bacteria growth.• All trim plates allow
copper inlet tube to swivel 360° for attachment to the piping latch valves to be individually removed for servicing.
system. •*Disclaimer: Use of this product does not protect user from disease-bearing
and food-borne pathogens.
Pin Index Outlets
(Note that a typical complete outlet consists of one Rough-in, one matching Latch Valve and one Trim Plate - Standard (325161-00) or Hook Plate (4107 2205 71))
Complete Complete
Color Code Assembly, Wall Assembly, Wall Rough-in Assembly, Rough-in Assembly, Latch-Valve Assembly,
Gas Service
(Background/Text) Outlet (Standard Outlet (Hook Wall Outlet Console Outlet Wall or Console
Trim Plate) Trim Plate)
Oxygen White/Green 121030-00 121030-01 233110-00 233010-00 230940-00
Nitrous Oxide Blue/White 121031-00 121031-01 233111-00 233011-00 230941-00
Medical Air Yellow/Black 121032-00 121032-01 233112-00 233012-00 230942-00
Vacuum White/Black 121033-00 121033-01 233113-00 233013-00 230943-00
WAGD Purple/White 121036-00 121036-01 233119-00 233019-00 230946-00
White-Black/Black-
Medical Air (ISO) 151032-00 151032-01 233116-00 233016-00 230947-00
White
Vacuum (ISO) Yellow/Black 151033-00 151033-01 233117-00 233017-00 230948-00
Accessories (Note good design provides one slide with each vacuum)
Duplex Electrical Receptacle*
Slide (Wall outlet style, Complete) 120978-00 120972-00
(Gray 15A, 125V, Wall outlet style, Complete)
Slide (Surface mount style) 135012-00 Trim Plate, Wall (Large) Style 325161-00
Blank, Gas (Complete with RI and finish) 120979-00 Trim Plate, Console (Small) Style 616358-00
Blank, Gas (Cover plate only) 415169-00 Series B Outlet Hook Plate 4107 2205 71
*See specification sheet SSB-840-13 for additional electrical receptacles.
BeaconMedæs • 1800 Overview Drive, Rock Hill, SC 29730 • Phone: (803) 817-5600 • Fax: (803) 817-5750 • www.beaconmedaes.com
SSB-840-05
4107 9507 40.03
Page 2 of 2
22 August 2016
Dimensions and Installation
360°
360˚ Rotation
Rotation of
inlet
oftube
inlet tube
Plaster
Plasterguard
guard
Latch Valve (provided)
Latch Valve (provided)
Interlock screws
Interlock screws 1/2"
1/OD (3/8"(3Nominal)
2” OD ASTM
/8” Nominal)
Mounting (provided) B-819 TypeB-819
K
Mounting (provided) ASTM
Holes
Holes Type K
(4 places)(2) (2)
5”
5"(127 mm)
(127 mm) (4 places)
5 1/2"
1/2”
5”
5" 55 33/4"
/4”
(140 mm)
140 mm (127 mm
127 mm) 146
(146 mm
mm)
4 1/16"
4
1/16”
TrimPlate
Trim Plate
103 mm
(103 mm)
(1)When wallboard is less than 1/2” / 12.5
wallboard is less than 1/2” mm thick, as in consoles and headwalls, console outlets should be considered.
(1)
When / 12.5 mm thick, as in consoles and headwalls, console outlets should be considered.
Plates may gang together in any length. Up to three may be ganged without additional support, however, top and bottom support is always recommended.
(2)
Plates
(2)
may gang together in any length.
Total finished length will be 5”/127 mm x number of Up to three
outlets in themay
gangbe ganged
(e.g. without
three outlets additional
=5x 3 = 15”). support, however, top and bottom support is always
recommended. Total finished length will be 5”/127 mm x number of outlets in the gang (e.g. three outlets = 5 x 3 = 15”)
Wallboard
Wallboard and Wallwall
and Covering
covering
1/2"
1/ ” //12.5
12.5mmmmMinimum
MINIMUM
(1)
, 1 1/4"
(1) / 31
, 1 1/mm
“ / Maximum thickness
31mm MAXIMUM thickness
2 4
2 33//4
4”"
700 m
mm m
441/16"
1/16”
104 mm Small Console
Console Rough
Console Roughin
In 787/16""
7/16” 104 mm Small
Trim Plate
189 mm
215 mm Console
(616358-00)
87/16"
777 7 /16”
77/16""
7/16""
7/16"" Trim Plate
33/8"
/8” 189 mm
9.5 mm 215
189189
189 mmmm
mm
mm (616358-00)
9.5 mm
Finish Assembly
Finish Assembly 1113/16"
13
/16”
446
6mmmm
55"”
112277
mm mm
3 3/4"
3/4” 5"
127
96 mm 3 1/4"
1/4” mm
96 mm 3
83 mm
83 mm
1 7/8"
7/8” 51/2"
55
1/2”
1/2"
48 mm
48 mm 104
140mm
140 mm
mm
7 1 6”"
22 7// m
2277// 16
11
6622m 66”" 2m mm
mmm 662
5 1/2"
140 mm
Standard
Standard WallTrim
Wall TrimPlate
Plate
(325161-00)
(325161-00)
Series B Outlet Hook Plate
(4107 2205 71)
US Patent No. D756,754
BeaconMedæs
1800 Overview Drive
Rock Hill, SC 29730
Phone: (803) 817-5600
Fax: (803) 817-5750
www.beaconmedaes.com ISO 13485 OHSAS 18001
