CeTePox for your Epoxy Systems
As individual as you are.
Green Building
High-performance epoxy systems
for sustainable building!
CeTePox® for low-emissions
coating structures.
The basics Your advantages
Sustainable building with CeTePox® CeTePox® - more than just epoxy
Sustainability means taking responsibility for evaluation scheme for this purpose. This in- As well as the special test certificate for 3. Low-emission solutions for many coa-
the problems of our time and not simply “ki- volves measuring not only the VOC emissions CeTePox® 140 S, this product range offers you ting issues
cking the can down the road” for later genera- of critical individual constituents but also the much more besides:
tions to deal with. Instead, problems should be total of all volatile substances using the TVOC Using this CeTePox® product range, it
resolved promptly. In this regard, sustainable concept (total volatile organic compounds). 1. Test certificate for use with rear surface is possible to achieve low emissions in
or “green” building is indisputably one of the Test chambers are used for measuring the moisture the entire coating structure. Difficult or
major challenges of our time. One of the prin- emissions from building products. The test pro- damp substrates, rear surface moisture
ciples of this approach is that the requirements cedure is in accordance with DIN EN 13419. The Two low-emission CeTePox® systems offer or the need for a flexible intermediate
in terms of material performance should not be measurement and the test are performed after you tested safety in this difficult area of layer no longer represent an obstacle.
met at the expense of the user or the environ- three and 28 days. application.
ment.
CTP has developed an innovative series of CeTePox® 103 NF S
The importance of this topic is revealed in that products which take full account of the AgBB CeTePox® 245 R / 1961 H
corresponding certification systems and qua- concept, thereby permitting sustainable appli-
lity marks have been introduced both natio- cations. 2. CE mark - inspection on the coating system
nally and internationally. Examples include the in accordance with DIN EN 13813
Deutsche Gesellschaft für Nachhaltiges Bauen
(German Sustainable Building Council, DGNB), The CE mark is used by the manufacturer to
Leadership in Energy and Environmental De-
The test certificate (EMICODE) declare under its own responsibility that its
sign (LEED) in the USA, Haut Qualité Environ- CeTePox® 140 S delivers product corresponds to the relevant legal re-
nementale (High Environmental Quality, HQE, gulations and technical specifications.
in France) and the Building Research Estab- All innovative products and systems in the low-
lishment Environmental Assessment Method emissions CeTePox® - product range are suitab- Overall, CTP offers a CE mark for nine re-
(BREEAM) in the UK. le for passing the test to measure the emissions sin/hardener combinations. In the product
of volatile organic compounds (VOCs, SVOCs) range of low-emission epoxy resin systems,
As far as floor coatings are concerned, sus- from construction materials acc. to DIN EN these are:
tainable building means not only the longest 13419.
possible durability but also and above all that CeTePox® 103 NF S
the coatings must not liberate any contamina- The CeTePox 140 S primer system has passed
®
CeTePox® 140 S
tion into the interior air, or only the smallest this test and received the test certificate. This
possible level of contamination, whilst they means we offer you the possibility of marketing
are in service. In Germany, the Committee for a certified system without having to spend your
Health-related Evaluation of Building Products own money on tests or having to incur any sig-
(Ausschuss zur gesundheitlichen Bewertung nificant costs.
von Bauprodukten, AgBB) has developed an
CeTePox for your Epoxy Systems
®
As individual as you are.
Characteristical Data and Specification
CeTePox® - Low-emission curing agents
CeTePox® Characteristics Viscosity Recommended H-Active-Equiva- Gardner Temp. Increase Properties and Fields of Application
Nonylphe-
DIN EN ISO Quantity of lent Weight [g/ Colour Index 23 °C 40 °C
alcohol-
nol-free
Benzyl-
3219 25 Hardener [g] 2) Eq.] ISO 4630 appr. [min] 1)
°C approx.
free
[mPas]
1510 H EP-stabilized cycloaliphatic 525 53 2) 93 <5 30 low-emission standard hardener with excellent general
polyamine properties
modified EP-stabilized cyclo- low-emission adduct hardener with excellent water-
1511 H aliphatic polyamine 470 45 5) 82 <3 21 5) spotting resistance, good through-cure and good
yellowing resistance
1960 H EP-stabilized polyamidoamine 1.700 60 4) 115 < 10 60 low-emission version of CeTePox® 1950 H; primer for
difficult, wet substrates with excellent adhesion
1961 H
EP-stabilized polyamidoamine,
1.400 60 4) 115 < 10 27 low-emission version ofn CeTePox® 1951 H; primer for
accelerated difficult, wet substrates with excellent adhesion
low-emission and low viscous version of
1961 LV H EP-stabilized polyamidoamine, 300 60 4)
accelerated 115 < 10 38 CeTePox® 1951 H; primer for difficult, wet substrates
with excellent adhesion
low-emission amine hardener, which shows a high
1976-02 NF H Formulated polyether amine 1.500 132 4)
254 <8 25 flexibility at temperatures down to - 10 °C. Application
fields are plastic coatings, crack- bridging membranes
or liquid foils (e.g. for sealants)
CeTePox® - Low-emission systems
CeTePox® Characteristics Mixing Ratio Viscosity Temp. Increase Shore-D Properties and Fields of Application
Benzyl-al-
Nonylphe-
cohol-free
(parts by weight of Mixture 23 °C 40 °C Hardness
nol-free
A:B) DIN EN ISO appr. [min] 1) 7d/23 °C
3219 23 °C ISO 868
approx. [mPas]
Two-component epoxy system free low viscosity, excellent wetting and adhesion properties, low sensitivity to
103 NF S from solvents and benzylic alcohol 100 : 42 350 40 83 early water stress; primers on concrete, even when moisture-permeated
from the backside
Two-component epoxy system free low viscosity, excellent wetting and adhesion properties; low sensitivity to
140 S from solvents, alkyl phenols and 100 : 40 580 21 80 early water stress; low emission (according EMICODE); primers, mortars
benzylic
1) Temperature Increase from 23 °C to 40 °C with 100 ml of mixture in an insulated beaker
2) with 100 g CeTePox® 152 R; 4) with 100 g CeTePox® 245 R; 5) with 100 g CeTePox® VP 1705-1 R
CeTePox for your Epoxy Systems
®
As individual as you are.
NEWS CeTePox® VP 388-69 H
Experience, innovation and service
CTP : That‘s our commitment
CTP - Consistently improving established excellence
The challenge was to achieve the same reactivity as Mannich bases wit-
hout using phenolic components – meaning that the R 62 label could be
avoided.
CeTePox® VP 388-69 H combines the hardening characteristics of a
Mannich base with properties that are otherwise only seen in cycloali-
phatic polyamines. Good early water resistance combined with low visco-
sity, good UV stability and good surface properties make this hardener
an attractive choice for many applications.
Talk to us or your usual local contact in order to obtain detailed informa-
tion.
CeTePox for your Epoxy Systems
®
As individual as you are.
CTP CHEMICALS AND TECHNOLOGIES
FOR POLYMERS GmbH
Stahlstraße 60
D-65428 Rüsselsheim
Fon +49 6142 - 9185 0
Fax +49 6142 - 9185 55
E-Mail ctp@ctpgmbh.de
www.cetepox.de
CTP 2012/02_V04
