Scribd
Upload
136 views1 page

Industrial Filament Tape Guide

This document provides information on T102 Heavy Duty Mono Oriented Filament Tape. It has a polypropylene backing reinforced with fiberglass that provides extraordinary tensile strength. It features high adhesion, excellent holding power, and is easy to bond to corrugated and solid surfaces. It is suitable for industrial applications like palletizing, carton sealing, splicing, and bundling due to its extreme tensile strength, tear resistance, and high resistance to abrasion and moisture.

Uploaded by

testing eipl
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
136 views1 page

Industrial Filament Tape Guide

This document provides information on T102 Heavy Duty Mono Oriented Filament Tape. It has a polypropylene backing reinforced with fiberglass that provides extraordinary tensile strength. It features high adhesion, excellent holding power, and is easy to bond to corrugated and solid surfaces. It is suitable for industrial applications like palletizing, carton sealing, splicing, and bundling due to its extreme tensile strength, tear resistance, and high resistance to abrasion and moisture.

Uploaded by

testing eipl
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

trustin tape

Technical Data Sheet


Date of Issue 11/10/2016 Rev. 01_13/07/2018

T102
Heavy Duty Mono Oriented
Filament Tape

Product Description

Heavy Duty transparent filament tape reinforced with fiberglass. Characterized by a bi-axially
oriented polypropylene backing that provides extraordinary longitudinal tensile strength for
high demanding reinforcements and an aggressive synthetic rubber resin solvent free adhesive
with excellent holding power.
Suitable for industrial bundling, reinforcing, splicing applications and for heavy loads securing,
withstanding rough shipping and handling conditions.

Features Main Applications

• High adhesion • Industrial Palletizing


• Excellent holding power • Heavy duty carton sealing
• Easy bonding to variety of corrugated and • Industrial splicing and jointing
solid board surfaces • Metal and pipe bundling
• Extreme tensile strength • General bundling and reinforcing
• High resistance to nicks, abrasion and moisture (no UV exposure recommended)
• Tear resistant

Technical Data
Metric Imperial Units Test Method
Total weight� 155 g/m2 155 g/m2 ISO 536
Total thickness� 135 µm 5.3 mils AFERA 5006/PSTC 133
MD tensile strength� 460 N/cm 262.7 Lbs/in AFERA 5004/PSTC 131
MD elongation at break� 7% 7% AFERA 5004/PSTC 131
Adhesion to steel plate� 4.8 N/cm 43.9 oz/in AFERA 5001/PSTC 101

Backing material Type of adhesive �Typical value


Fiberglass laminated BOPP Synthetic rubber resin - solvent free

Available colour

Transparent

Technical Information and Product Use


All technical information and data above mentioned are provided to the best of our knowledge on the basis of our practical experience. Figures shown refer to average values only,
based on tests carried out in conditioned laboratory and are not valid for specification. The company reserves the right to modify or change the products at any time without notice.
The accuracy or completeness of such information is not guaranteed. The technical information, suggestions and other statements contained in this document have been compiled
for your guidance and usage. PPM Industries reminds the user of the products to make sure that the product is used as per the instructions and suggestions provided. It is the user’s
sole responsibility to determine the suitability of the product in actual application under specific conditions.

Storage and Shelf Life


Suggested storage in dry area away from direct sunlight temperature should range from 59°F / 15°C to 77°F / 25°C with max relative humidity of 50%. Tape and jumbo roll should be
used respectively within 12 months and 6 months from date of manufacture. PPM Industries does not take responsibility for the defective material if is not stored and used in
accordance with the conditions listed above.

trustintape.com contact@trustintape.com

You might also like