NETSURE™ LBD 2000
Battery Disconnect
Feature-rich design provides monitoring and control.
KEY FEATURES
Description
yy Local and remote operation The NetSure™ LBD 2000 is a modular DC to DC Battery Disconnect providing
of disconnect disconnection and overcurrent protection for +24VDC or -48VDC battery strings.
yy Small footprint and multiple Over-current protection is provided by a user-specified fuse rated from 1000 to 2000
wiring attachment points allow amps. A shunt, included with the over-current protection device, measures charge
for ease of installation and discharge current and can be monitored by a Lorain VPS or LVS MCA, Vertiv™
monitoring equipment, or any monitoring system using a 25mV shunt input. The
yy Current monitoring is provided disconnect can be wall mounted or 23-in. rack mounted as required. Separate remote
by a 25mV shunt included with
and EPO inputs are standard features that allow for operation of the disconnect remotely
each disconnect
for use in EPO or low-voltage disconnect applications.
yy Battery recharge current limiting
The built-in shunt measures charge and discharge current for the batteries. Battery
ability can increase battery life
damage is prevented and battery life is increased with the use of a built-in Vortex® shunt
yy Safety features include a Lock card and a Lorain VPS or LVS with the MCA set up to limit battery recharge current. An
Out-Tag Out (LO/TO) EPO switch can be connected to this disconnect to comply with local and national fire
attachment point and a door codes (NEC). Low-voltage controllers can be interfaced directly to this disconnect to
latch that is tool-secured for provide protection of the batteries during discharge.
restricted access
Safety and security features include a cover that can be locked in place during
yy Alarm options include a Form C, maintenance operations to prevent access to the battery fuses. A door alarm switch
FA alarm, contactor status alarm provides a set of contacts that will change state whenever the door is opened. Any
and a door open alarm access or operation of the door can be monitored using this feature. The door latch can
yy Two LED indicators provide a also be tool-secured for restricted access.
visual display of the status of the
fuse and contactor
yy A removable door permits easy
wiring access during installation
and maintenance
yy Disconnect assists in
compliance with local codes
NetSure™ LBD 2000 (Open)
1
NETSURE™ LBD 2000
Application
The Vertiv™ battery disconnect is ideal for a data center or central office application. For
additional specification, engineering or installation information, specify model NetSure™
LBD 2000 specification number 586400200 for disconnect.
Technical Specifications
586400200
Rating (Amps) 1000-2000
Rated Voltage 60VDC
Operating Voltage +24VDC/-48VDC
NetSure™ LBD 2000
Max Size of Overcurrent Device 2000A Fuse
Dimensions (HxWxD) 10U x 21.38" x 11.63"
Weight Net: 90 lbs., Shipping: 105 lbs.
Int Rating (kIAC) 100kAIC Fuse/10kAIC Disc
Compliance UL/cUL Listed to 1801
FA Alarm Contact Rating 0.5A@125VAC, 1.0A@30VDC, 0.3A@110VDC
Door Alarm Contact Rating 1A - 125VAC, 2A - 24VDC, 0.1A - 125VDC
Operating Temperature 0-40°C
Mounting Wall or 23" Relay Rack Mounted
VertivCo.com | Vertiv Headquarters, 1050 Dearborn Drive, Columbus, OH, 43085, USA
© 2016 Vertiv Co. All rights reserved. Vertiv and the Vertiv logo are trademarks or registered trademarks of Vertiv Co. All other names and logos referred to are trade names, trademarks or registered trademarks of their respective owners. While every precaution has been
taken to ensure accuracy and completeness herein, Vertiv Co. assumes no responsibility, and disclaims all liability, for damages resulting from use of this information or for any errors or omissions. Specifications are subject to change without notice.
DC-00005 (R12/16) 2
