Solenoid

Pilot Valve

General Sample Specification

• Function: 3/2 way, 5/2 way GF’s Pilot Valve family shall be single coil solenoid valves and
• Voltage: 110VAC, 230VAC, 24VDC, 24VAC utilized with a GF pneumatically actuated valve. The actuator
• Housing Material: Polyamide, anodized aluminum, brass mount shall be either be direct or NAMUR compliant. The
• Pressure: 150psi media shall be clean, dry, compressed air. The protection
• Protection Class: IP65 class shall be IP65 and the duty cycle shall be 100 percent.
• Manual Override: Integrated
• Duty Cycle: 100%
• Mount: Direct or NAMUR
Spring Return Pilot Valves
Double Acting Pilot Valves
Valve Type Size Solenoid Type
Valve Type Size Solenoid Type
230-233 ⅜”-2” (d16-d63) PV94
230-233 All PV5470
230-233 2½”-4: PV95
285-288 All PV5470
285-288 All PV94
240 All PV5470
240 All PV95
244 All PV5470
244 All PV95
DIASTAR 604/605 All PV5470
DIASTAR 604/605 All PV95
DIASTAR Ten All PV5470
DIASTAR Six All PV94
DIASTAR 025 All PV5470
DIASTAR Ten ½”-1¼” (d20-d40) PV94
The above/right tables show the suggested pilot valve for each DIASTAR Ten 1½”-2” (d50-d63) PV95
valve type offered by GF. Alternative models should be used if DIASTAR TenPlus ½”-1” (d20-d32) PV94
the operator desires faster or slower than standard cycle DIASTAR TenPlus 1¼”-2” (d40-d63) PV95
times. DIASTAR 025 2½”-6” (d75-d160) PV95

203
 PV94 PV95
• Function: 3/2 ways • Function: 3/2 ways
• Voltage: 110VAC, 230VAC, 24VDC, 24VAC • Voltage: 110VAC, 230VAC, 24VDC, 24VAC
• Voltage Tolerance: ±10% • Voltage Tolerance: ±10%
• Pressure: 150psi • Pressure: 150psi
• Flowrate Air: 49 in3/s • Flowrate Air: 122 in3/s
• Housing Material: Polyamide • Housing Material: Brass
• Banjo Bolt Material: Nickel plated brass • Pneumatic Connector Material: Anodized aluminum
• Seal Material: NBR • Banjo Bolt Material: Brass
• Manual Override: Integrated • Seal Material: FPM
• Duty Cycle: 100% • Manual Override: Integrated
• DIN Plug: DIN EN 175301-803 Form C • Duty Cycle: 100%
• Coil Output: 4W (AC/DC) • DIN Plug: DIN 43650 Form A
• Startup Power: 9VA (AC), 4W (DC) • Coil Output: 8W (AC/DC)
• Operation Power: 6VA (AC), 4W (DC) • Startup Power: 24VA (AC), 8W (DC)
• Response Time Open/Close: 7-12 ms • Operation Power: 17VA (AC), 8W (DC)
• Process Temperature: 14 °F to 212°F • Response Time Open: 18 ms
• Ambient Temperature: 14 °F to 131°F • Response Time Close: 22 ms
• Actuator Connection: G⅛” • Process Temperature: 14 °F to 212°F
• Weight: 135 g • Ambient Temperature: 14 °F to 131°F
• Protection Class: IP65 4 2 adapter to G¼”
• Actuator Connection: G⅛” with
• Weight: 420 g
• Protection Class: IP65
PV94 PV95
5 1 3

Wiring
+/- +/-
Note: No polarity

Dimensions
The following dimensions are shown in millimeters unless otherwise specified

PV94 PV95

204
PV5470
• Function: 5/2 way
• Design: Single coil, spring return
• Voltage: 110VAC, 220VAC, 24VDC
• Voltage Tolerance: -15%/+10%
• Pressure: 150psi 4 2
• Seal Material: NBR
• Manual Override: Integrated
• Duty Cycle: 100%
5 1 3
• Operation Power : 5VA @ 60 Hz, 5.6VA @ 50Hz (AC) Control Wiring
• Nonoperating Power: 2.3VA @ 60 Hz, 3.4VA @ 50 Hz (AC)
4 2
• Operating Power: 1.8W (DC) +/- +/-
• Temperature: 14 °F to 140°F
• Pneumatic Connection: G¼”
• Actuator Connection: NAMUR compliant 5 1 3
• Weight: 320 g
• Protection Class: IP65 +/- +/- Note: No polarity

Optional Feature Accessory

The PV5470 is available with double coil functionality. GF offers a pneumatic port NAMUR adapter to mount
Standard units utilize a single coil to move a piston to the PV5470 and MLN532 pilot solenoid valves to actuators that
active state and a spring to return it to the deactive state. are not NAMUR compliant. This adapter is compatible with
The double coil replaces the spring with an additional coil every pneumatic actuator in the GF product line.
and DIN plug.

Dimensions
The following dimensions are shown in millimeters unless otherwise specified

205
 5/2 way 5/2 way 5/2 way

4 2 4 2 4 2

MLN532 Speed Control

• Function: 5/2 way and 3/2 ways
5 1 3 5 1 3 5 1 3
• Speed Control: Two port throttling valves
• Design: Single coil, spring return
3/2 way 3/2 way 3/2 way
• Voltage: 110VAC, 230VAC, 24VDC, 24VAC
• Voltage Tolerance: ±10% 4 2 4 2 4 2

• Pressure: 150psi
• Flowrate Air: 966 in3/s
5 1 3 5 1
5/2 3
way 5 1 3
• Housing Material: Anodized aluminum
• Banjo Bolt Material: Nickel plated brass 4 2
Wiring Wiring Wiring
• Seal Material: NBR
• Manual Override: Integrated - + - + - +
2 1 2 1 2 5/2 way1
• Duty Cycle: 100%
5 1 34 2
• Operation Power: 5VA (AC), 3W (DC)
• Response Time Open/Close: 7-12 ms
• Temperature: 14 °F to 122°F 5/2 way 5/2 way 3/2 way 3/2 way
5 1 3
• Pneumatic Connection: G¼”
4 2 4 2
• Actuator Connection: NAMUR compliant
3/2 way
• Protection Class: IP65
4 2
5 1 3 5 1 3

5 1 3
Control 3/2 way Wiring Wiring
4 2 Wiring - +
2 -1 +
2 1

5 1 3

Wiring
- +
2 1
5/2 way 3/2 way

Dimensions
Way Function 5/2 Way Function
3/2 Way Function 3/2 Way Function 3/2 Way Function

The following dimensions are shown in millimeters unless otherwise specified

3/2 Way Function

5/2 Way Function

206
3/2 Way Function
5/2 Way Function