0% found this document useful (0 votes)

93 views186 pages

Operation Manual

Uploaded by

miguel angel diaz

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

0% found this document useful (0 votes)

93 views186 pages

Operation Manual

Uploaded by

miguel angel diaz

We take content rights seriously. If you suspect this is your content, claim it here.

Available Formats

Download as PDF, TXT or read online on Scribd

You are on page 1/ 186

OPERATION MANUAL

MIMAKI ENGINEERING CO., LTD.

D202142-20
TABLE OF CONTENTS

Foreword ......................................................................... vi
Note .................................................................................vi
New Functions of FineCut8 .............................................vii
System Requirement ......................................................viii
System and software ..................................................... viii
How to Read This Manual ............................................... ix

CHAPTER 1 Preparation
Setting of Plotter ..................................................... 1-2
Installation of FineCut ............................................. 1-3
Online Information .................................................. 1-7
Connecting to the Plotter ........................................ 1-8

CHAPTER 2 Basic Cutting

Basic Cutting .......................................................... 2-2
Basic cutting ..............................................................2-2
Fill and Stroke of an Object .......................................2-5

CHAPTER 3 Creating Register Marks

Work Flow ............................................................... 3-2
Making a Frame (Cutting Line) ............................... 3-3
Making Register Marks ........................................... 3-4
Register Marks ..........................................................3-4
CG/CJV30/TPC/CJV300/CJV150 series ...................3-5
CF2/DC/CF3 series ...................................................3-8
CFL-605RT .............................................................3-10
Cutting an Object .................................................. 3-13
CG-EX series ..........................................................3-13
CG-FX/ CG-FXII/ CG-75ML/ CG-60SR/ CG-SRII/ CG-
SRIII/ CJV30/ TPC/CJV300/CJV150 series ............3-14
CF2/DC/CF3 series .................................................3-23
CFL-605RT .............................................................3-31

ii
CHAPTER 4 Advanced operations-from FineCut Com-
mand Bars
Recognizing Stroke Weight and Overlap ............... 4-2
Trapping ................................................................. 4-3
Joining Paths ......................................................... 4-4
Making a Precut Line around an Object ................. 4-5
Creating Shadow / Edge ........................................ 4-7
Importing / Outputting Plot File .............................. 4-8
Importing a plot file ................................................... 4-8
Outputting a plot file .................................................. 4-9
Extracting the Outline ........................................... 4-10
Trace simply ........................................................... 4-10
Trace with detail setting .......................................... 4-11
Outputting to RasterLink (CJV30/TPC/CJV300/CJV150
series) .................................................................. 4-12
How to set cutting paths ......................................... 4-16
Setting Output Condition ...................................... 4-18
Separating and Cutting Lines (CF/DC/CF2/CF3
(except M-Head) series) ...................................... 4-20
Cutting with the line separated ............................... 4-20
The blade shapes and the setting of line
separation ............................................................... 4-24

CHAPTER 5 Advanced operations-from Plot Screen

Scaling an Object ................................................... 5-2
Scaling an object with a fixed aspect ratio ................ 5-2
Scaling only width or length of an object .................. 5-3
Cutting an Object Multiple Times (Copy) ............... 5-4
Dividing and Cutting an Object (Tiling) .................. 5-6
Cutting an Object on Each Color ........................... 5-8
Cutting an Object on Each Layer ......................... 5-10
Setting the Output Order/Tool on Each
Color/Layer .......................................................... 5-12
Setting Output Condition on Each Color/Layer .... 5-14
Making Effective Use of Sheet ............................. 5-17
Setting Connection to the Plotter ......................... 5-19
Setting Head Position after Plotting ..................... 5-20
Checking the Cutting Process by Preview ........... 5-22

iii
CHAPTER 6 Advanced operations-others
Editting the Line ...................................................... 6-2
Setting Cutting Start Position .................................. 6-4
Specifying the Cut Direction ................................... 6-6
Registering Favorite ............................................... 6-8
Registering output conditions for “Favorite” ..............6-8
Registering a tool as a “Favorite” ..............................6-9
Changing registered contents of a “Favorite” ..........6-10
Applying “Favorite” when cutting .............................6-10
Cutting with CF3 Series (M-Head) ........................ 6-11

CHAPTER 7 Description of Functions

FineCut Menu ......................................................... 7-2
How to display FineCut menu ...................................7-2
Menu .........................................................................7-2
[Plotter / User Setup] Screen .................................. 7-4
Plotter ........................................................................7-4
Output Condition Setup .............................................7-5
Communication .......................................................7-12
Plot Dialog ...............................................................7-13
Alert Display ............................................................7-14
Other .......................................................................7-15
[Plot] Screen ......................................................... 7-16
[Plot Out] Screen .................................................. 7-26
[Outline Extraction] Screen ................................... 7-29
Trace simply ............................................................7-29
Trace with detail setting ..........................................7-30
[Output to RasterLink] Screen .............................. 7-32
[About FineCut] Screen ........................................ 7-35
Setting Cutting Start Position ................................ 7-36
[Online Information] Screen .................................. 7-37
Uninstallation of FineCut ...................................... 7-38

iv
CHAPTER 8 Troubleshooting
Troubleshooting ..................................................... 8-2
Communication port error occurs while plotting ....... 8-2
Sheet size does not change ..................................... 8-2
A part of contour protrudes ....................................... 8-3
Note for cutting an object with a sharp corner .......... 8-3
Note for trapping ....................................................... 8-4
Error Messages ...................................................... 8-5
CorelDRAW Object List ......................................... 8-6

v
Foreword
Thank you very much for purchasing a product of MIMAKI.
FineCut, a plug-in software for CorelDRAW, offers simple operation and stable cutting environment which
has never been realized by other cutting software.

Note
• This Operation Manual has been carefully prepared for your easy understanding, however, please do
not hesitate to contact a distributor in your district or our office if you have any inquiry.
• Description contained in this Operation Manual are subject to change without notice for improvement.
• Do not copy this software to any other disk for the purpose of other than making a backup disk or load
it in memory for the purpose of other than execution.
• Except for the damages prescribed in Warranty Notes of MIMAKI Engineering Co., Ltd. assumes no
responsibility for effects (including loss of income, indirect damages, special damages, or other
financial damages) resulting from the use or non-use of the product. This also applies to the case
when MIMAKI Engineering is notified of the possibility of damages.
For example, MIMAKI Engineering Co., Ltd. assumes no responsibility for damages of media (work)
caused by using this product and indirect damages caused by a product created using the media.
• You can also download the latest operation manual from our website.

FineCut is registered trademarks of MIMAKI ENGINEERING CO., LTD.

CorelDRAW is a trademark of Corel Corporation.
Microsoft and Windows are registered trademarks of Microsoft Corporation of the U.S.A.
Each of the company and product names are trademarks or registered trademarks of each individual company.

Reproduction of this manual is strictly prohibited.

vi
New Functions of FineCut8
Advanced cutting
You can specify the cutting start position. ( P.6-4)
You can also avoid cutting thick media too much by separating line and cutting from outside to
inside, or from inside to outside. (CF/CF2/DC/CF3 series) ( P.4-20)

Extracting outline easily ( P.4-10)

You can extract outline of images easily with “Trace simply”.

Adding the register mark ( P.3-4)

You can add the mark () on the bottom center of the register guide. (option)
You can easily find the direction of the registry guide when cutting printed objects.

The latest information of FineCut online ( P.7-37)

You can get the latest information of FineCut online such as update information.
(For Mac OS X, 10.4 or later is supported.)
(It displays in English or Japanese.)

Correction using intermediate register mark ( P.3-6)

You can cut a long outline with higher accuracy by the intermediate register mark and the register
reading function of CG-SR III series.

vii
System Requirement
System and software
The following conditions are required to use FineCut8.
Item Requirement
Computer IBM PC or compatible mounting Pentium processor or compatible CPU
OS Microsoft Windows Vista, Windows7, Windows8, Windows8.1,
Windows10
Monitor 1024 x 768 pixels, or higher resolution is required
Software CorelDRAW® 11, 12, X3, X4, X5, X6, X6(64-bit), X7,X7(64-bit), X8, X8(64-bit)
Plotter MIMAKI CG series (CG-45 or later), MIMAKI CF-09/12 series,
MIMAKI CF2 series, MIMAKI DC series, MIMAKI CF3 series,
MIMAKI CJV30 series, MIMAKI TPC, MIMAKI CJV300/150 series
MIMAKI CFL-605RT
Online Information
As described in “OS” above
function
Connection Serial connection (crossing cable) or USB connection or LAN connection
Others Compliant with the operation environment of CorelDRAW® used

viii
How to Read This Manual
Notations
Menu items and buttons displayed in each screen are enclosed in square brackets like [File] menu.

Symbols

• Indicates cautions or procedures you must perform.

• Describes useful information.

• Indicates a page of related contents for reference.

FineCut menu
FineCut menu is displayed as follows on CorelDRAW.
In this manual, it is called “FineCut Command Bars”.

ix
x
CHAPTER 1
Preparation

This chapter describes how to set the plotter, install FineCut, and
set the connection to the plotter.
Before using FineCut, work in the order described in this chapter.

Setting of Plotter ...................................................... 1-2

Installation of FineCut.............................................. 1-3
Online Information ................................................... 1-7
Connecting to the Plotter ......................................... 1-8
Setting of Plotter
Before using FineCut, set the plotter used as described below.

Plotter Item Setting

CG-EX Series ORIGIN SELECT LOW RIGHT
CG-FX Series, ORIGIN SELECT LOW RIGHT
CG-FXII Series, Register Mark Setting MARK DETECT 1Pt
CG-75ML,
DIST REVI AFTER
CG-60SR,
CG-SRII, offset A 0.0mm
CG-SRIII Series offset B 0.0mm
COPIES A (↑ ) 1 (sheet)

COPIES B ( ←) 1 (sheet)

ROTATION OFF
PRIORITY HOST
CJV30 Series, MARK DETECT 1Pt
Register Mark Setting

TPC OFFSET Y (← ) 0.0mm

CJV300 Series,
OFFSET X (↑ ) 0.0mm
CJV150 Series
• Set all for each tool. COPIES Y (←) 1 (sheet)

COPIES X (↑) 1 (sheet)

CF-09/12 Series CMD SW Enable

ORIGIN LOW-LEFT
CIRCLE θ CORRECTION Enter an angle of positive number
CF2 Series, CMD SW Enable
DC Series, LOW-LEFT
CF3 Series ORIGIN
(LOW-RIGHT for CF3)
CFL-605RT
CIRCLE θ CORRECTION Enter an angle of positive number
EXPAND OFF
MARK DETECT
• Register mark detection cannot be set unless the 1pt
expand is set to OFF.
<MULTI-PASS>-CUT START OFF

1-2
Installation of FineCut
• In case the CorelDRAW has never been activated after the installation, an error message is
displayed during installing and its installation shall be interrupted.

1
Activate the displayed version of CorelDRAW once, exit CorelDRAW, then install FineCut.

1 Start the computer, and set the CD-

Preparation
ROM of FineCut into the CD drive.

2
Click [FineCut8 for CorelDRAW
Setup].

3
Click [Next].

4
Check the Software License
Agreement.
• Read through the agreement, click [I accept
the terms in the license agreement] to consent
the agreement, and click [Next].

1-3
5
Check the CorelDRAW to be installed
on, and click [Next].
• Uncheck the CorelDRAW not to be installed
on.

6
Click [Install].
• Installation starts.

7
Click [Finish].

8 Click [Yes] to register the FineCut

icons.

9
If USB driver does not exist, a screen
shown on the right appears.
Click [Yes].
• If USB driver exists, go to the Step 15.

1-4
Installation of FineCut

10
Click [Next].

Preparation
11
Check the Software License
Agreement.
• Read through the agreement, click [I accept
the terms in the license agreement] to consent
the agreement, and click [Next].

12
Click [Install].
• Installation starts.

13 Click [OK].
• Connect the plotter.

14
Click [Finish].

1-5
Installation of FineCut

15
Click [Finish].
• Installation is complete.

Next, go to "Online Information". ( P.1-7)

1-6
Online Information
If a new information about FineCut is found, the following screen appears when using FineCut first.
Click necessary items and check the information. ( P.7-37 for details)

Preparation
Next, go to "Connecting to the Plotter". ( P.1-8)

1-7
Connecting to the Plotter
Before outputting data to the plotter, set the plotter on FineCut.

• Set the same values for Plotter and Communication as the settings on the plotter.
If the entered values differ from the settings on the plotter, objects will not be cut normally.

1
When using FineCut first after the
installation, the screen shown on the
right appears.
Click [Setting].

2
Select the plotter used.
• Select the plotter used on [Model].
Set the other items as needed. ( P.7-4)

3 Click [Communication] tab and select

the port of the plotter.
• After selecting the port, click [Connection test]
to check the plotter is correctly connected. (
P.7-12 for details)

4 Click [Setup] to save the setting.

Preparation is complete.

1-8
CHAPTER 2
Basic Cutting

This section describes basic procedures of cutting.

Basic Cutting ........................................................... 2-2

Basic cutting .............................................................. 2-2
Fill and Stroke of an Object ....................................... 2-5
Basic Cutting
Basic cutting
The following steps show how to cut ABC in the lower right of A3 size sheet, and how to cut a frame away
from surroundings of ABC by 5mm, using MIMAKI CG series.

A3 size sheet

Frame

1 Load a A3 size sheet into the plotter

so that it is wider than it is tall.

• For the sheet loading or the plotter operation, refer to the Operation Manual supplied with the
plotter.

2
Set the plotter to REMOTE mode.

• FineCut cannot load the sheet length set on the plotter in LOCAL mode.

3
Start CorelDRAW and create a new
document.
• You do not need to set A3 for the paper size.

• If the following screens appear, see "CHAPTER 1 Preparation".

“Online Information” “Plotter / User Setup”

2-2
Basic Cutting

4
Enter “ABC” with the
lettering tool .

2
5
Click [Plot] button in the FineCut
Command Bars.

• “FineCut Command Bars” is automatically displayed. If “FineCut Command

Basic Cutting
Bars” is not displayed, select [FineCut] Command Bars from the [Tools]-
[Customization]-[Workspace] menu in CorelDRAW.

6
Set a frame and click (Plot
button).
• Set as follows to cut a rectangle frame away
from surroundings of the object by 5mm.
(1) Put a check on [Frame].
(2) Enter 5mm long, and 5mm wide.

• If mark appears on the left of (Sheet Loading button), the sheet size is
not loaded.
In this case, click (Plotter/User Setup button) on the bottom left of the screen
to check the connection with the plotter. If correctly set, mark will disappear.

2-3
7
Set plot condition, and click [Plot].
• ( P.7-26 for details)

• Match the conditions to the media on the plotter. If the setting is unmatched, the
object will not be cut normally.

8
The object is cut.
• The object is cut on the bottom right (the
bottom left for MIMAKI CF/CF2/DC series),
which is the sheet origin of the sheet.

9
After cutting, click (End button).
“Plot” screen is closed.

2-4
Basic Cutting

Fill and Stroke of an Object

In the figure below, the fill of the ellipse is set and stroke are made thicker.
Not the outline of stroke, but the outline of fill (middle of the line) is cut.

2
Cut

Basic Cutting
If an object is not filled with a color, the stroke path is cut.
The stroke path is cut, regardless of the thickness. Check the path when selecting [Wireframe] from the
[View] menu of CorelDRAW.

Cut

Path is...
Path is a created line with the drawing tool of CorelDRAW.
The outline of a graphic object also consists of a path. The outline of a straight line or a rectangle created by
CorelDRAW is also a typical example of path.

• To cut an object with the stroke weight recognized or to cut with stroke and fill separated, see
the following page.
( P.4-2 "Recognizing Stroke Weight and Overlap")

2-5
2-6
CHAPTER 3
Creating Register Marks

This section describes how to cut frames of the printed image

with register marks function to make seals, stickers, and sign-
panels.

Work Flow.................................................................. 3-2

Making a Frame (Cutting Line) .................................. 3-3
Making Register Marks.............................................. 3-4
Cutting an Object..................................................... 3-13
Work Flow
• Fit the communication setting of FineCut to the setting of the plotter connected.
If the FineCut settings differ from the settings of the plotter, the object will not be output
normally. ( P.7-12)

1 Make an object. Make an object for printing on

CorelDRAW.

2 Make a frame (cutting

line).
( P.3-3)
Make a frame (cutting line) fitting to
the object on FineCut.

3 Make register marks.

( P.3-4)
Make register marks on FineCut.
Various kinds of register marks can
be made depending on the plotters
used.

4 Cut the object. ( P.3-13) Set the printed media on the plotter,
and cut it.
You can cut various media
depending on the use.

For cutting, the following functions can be used depending on the plotters used.

Model Function Reference page

CG-EX series Cutting register marks P.3-13
CG-FX/ CG-FXII/ CG-75ML/ Cutting one image continuously P.3-14
CG-60SR/ CG-SRII/ CG- Cutting multiple images continuously (CG-75ML
SRIII/ CJV30/ TPC/CJV300/ P.3-18
only)
CJV150 series Cutting an outline and a base sheet cutline at a
P.3-21
time (except CG-FX/CG-FXII)
CF2/DC/CF3 series Cutting register marks P.3-23
Cutting with Mark Separation P.3-26
Cutting from the reverse side P.3-28
CFL-605RT Cutting register marks P.3-31
Cutting with Mark Separation P.3-34
Cutting from the reverse side P.3-28

3-2
Making a Frame (Cutting Line)
Specify offset to make cutting line automatically.

1
Select an object to attach a frame.

2
Click [Frame Extraction] button in the
FineCut Command Bars.

3
Set a path for the frame.
Set the distance from the object to the frame.
For bleed, enter a negative value.
3
The larger offset value, the less accuracy.

Creating Register Marks

Offse

4
Click [OK].
The frame is extracted, and a path is created in [FC Frame Layer].

• Every time executing [Frame Extraction], a new layer is created as “FC Frame
Layer 1”, “FC Frame Layer 2”.
Use them when setting print or cutting condition for each layer. ( P.5-14)
• The data in this layer is set as non-printed, since it is used as cutting data.
To print this data, enable “Printable” on CorelDRAW “Layer properties”.

3-3
Making Register Marks
Register Marks
The size (B) of a register mark suited for the distance (A) between the marks is as shown below.
If the mark size (B) is too small relative to the distance (A), the marks may not be detected correctly.
Be sure to prepare the register marks with an appropriate size.

CG series, CJV30 / TPC, CJV300/ CJV150 series

A 200 max. 500 max. 1000 max. 2000 max. 2001 min.
B 4 min. 8 min. 15 min. 25 min. 35 to 40
(mm)

• For CG-SR III series, make the register mark size (B) more than ten times the line width the
register mark.

CF2 / DC / CF3 series

Square register marks Single register marks Double register marks

A 200 max. 500 max. 1000 max. 1500 max. 1501 min.
B 5 10 15 20 30
(mm)

CFL-605RT

A 200 max. 500

B 10 15
(mm)

3-4
Making Register Marks

CG/CJV30/TPC/CJV300/CJV150 series

1
Enclose an object with a rectangle on
the position for making a register
mark.

2
Click [Register Mark Creation] button
in the FineCut Command Bars.

3
Set the shape or others for the
register mark.
3
Click [OK] after setting.

Creating Register Marks

Item Description
Mark Shape Select the shape of the register mark.
Mark Size Set the size of the register mark.
Recommend Mark Size Displays a recommended register mark size.
Line Width Set the line width of the register mark.
Leave a rectangle as the
Cuts the rectangle created in step 1.
cutting line
Add the Mark  mark is added while making register marks.
For the data that the front and the back looks alike, add
this mark to set a printed media on the plotter in the correct
direction.
• f you set the intermediate register mark, you cannot add a print
direction mark.
Fill around the register Fills around the register mark with red spot color.
mark When register mark is not recognized on the media of
other than white, the mark can be recognized with this
function.

• Recommend color to fill around is red (default) or white. To print

with white, refer to the printer manual. Generally allocate red
spot color to white and print.

3-5
• When register mark is not recognized filling around the mark with red or white, it will not
improve with the other colors. Furthermore, some types of media or inks may not recognize
the register mark even if the color around the mark is changed.
• When cutting continuously ( P.3-14) with this function, do not gap between register marks.

When register shape is When register shape is

No gap between the register marks

Item Description
Add the pattern information Adds a bar-code shaped pattern information with register mark.
(Only for CG-75ML) With the pattern information and the register mark reading
function, you can cut the outline of multiple different sticker at
one time.
Intermediate Registration Marks Adds the intermediate register mark.
(Only for CG-SRIII, CJV300, CJV150 You can cut a long outline with higher
series) accuracy by the intermediate register mark
and the register reading function of CG-SR
III, CJV300 and CJV150 series.

Direction
Set the split direction of the intermediate register mark.

Count Set the number of splits of the intermediate register mark.

Specify the number of splits within [2 to 10].

• When you set the intermediate register mark, set the number of splits of the intermediate
register mark so that spaces between the register marks may become more than 50mm.

3-6
Making Register Marks

• A color of the register mark can be changed as follows.

(1) Select [Tools]- [Object Manager] in the
CorelDRAW.

(2) Click on the [FineCut_TomboRound] in

the [Object Manager] shown at the right
of CorelDRAW.

Creating Register Marks

(3) Doubleclick the “Fill Color ” at buttom
right of CorelDRAW and change the
color in the [Uniform Fill] Window.
Repeat on to other three registermarks.

4
Register marks are created.
Output this data to the printer.

• Creating one register mark, a new register mark data is created in the new layer
as [FC Register Mark Layer 1], [FC Register Mark Layer 2]...
Please note that FineCut recognizes only one set of register mark. When two or
more register mark sets are created, set unnecessary register mark undisplayed.

3-7
CF2/DC/CF3 series

1
Enclose an object with rectangle on
the position for making a register
mark.

2 Click [Register Mark Creation] button

in the FineCut Command Bars.

3
Set the size of register mark.
Click [OK] after setting.

Item Description
Mark Shape Select the shape of the register mark.

• When using the mark also for CG series, select .

Mark Size Set the size of the register mark.
Recommend Mark Size Displays a recommended register mark size.
Put a print direction mark  mark is added while making register marks.
For the data that the front and the back looks alike, add
this mark to set a printed media on the plotter in the correct
direction.

3-8
Making Register Marks

Item Description
Mark Separation Cuts each separated area.
Use it when an object is too large to fit in the cut area.
( P.3-26 for cutting)
• For the figure below, it is cut in 3 times of 1 to 3.

3
1 Separation Mark

• The position of the separated mark can be moved by selecting

with [Pick Tool] of CorelDRAW.
To change the position of the marks, align them on the same
line in the separated direction (Vertical for the figure above).
Marks of left and right (or above and below) make a pair. To
change the mark position, move them together.

Creating Register Marks

• On the CF2/DC/CF3 series, set the same values as the settings above.
Setting items of each machine: [SIZE] [STYLE]
See the operation manual of each machine for details.

4
Register marks are created.
Output this data to the printer.

3-9
CFL-605RT

1
Enclose an object with a rectangle on
the position for making a register
mark.

2
Click [Register Mark Creation] button
in the FineCut Command Bars.

3
Set the shape or others for the
register mark.
Click [OK] after setting.

Item Description
Mark Shape Select the shape of the register mark.
• When using the mark also for CG or CF series, select .
Mark Size Set the size of the register mark.
Set the larger size than [Recommend Mark Size] below.
Recommend Mark Size Displays a recommended register mark size.
Leave a rectangle as the
Cuts the rectangle created in step 1.
cutting line
Put a print direction mark  mark is added while making register marks.
For the data that the front and the back looks alike, add
this mark to set a printed media on the plotter in the correct
direction.
• f you set the intermediate register mark, you cannot add a print
direction mark.
Fill around the register mark Fills around the register mark with red spot color.
When register mark is not recognized on the media of
other than white, the mark can be recognized with this
function.
• Recommend color to fill around is red (default) or white. To print
with white, refer to the printer manual. Generally allocate red
spot color to white and print.

3-10
Making Register Marks

Item Description
Mark Separation Cuts each separated area.
Use it when an object is too large to fit in the cut area.
( P.3-34 for cutting)

• For the figure below, it is cut in 3 times of 1 to 3.

1 Separation Mark
3
• The position of the separated mark can be moved by selecting with
[Direct Selection Tool] of Corel Draw. To change the position of the
marks, align them on the same line in the separated direction
(Vertical for the figure above). Marks of left and right (or above and

Creating Register Marks

below) make a pair. To change the mark position, move them
together.

• When register mark is not recognized filling around the mark with red or white, it will not
improve with the other colors. Furthermore, some types of media or inks may not recognize
the register mark even if the color around the mark is changed.
• When cutting continuously ( P.3-14) with this function, do not gap between register marks.

When register shape is When register shape is

No gap between the register marks

• On the CFL-605RT, set the same values as the settings above.

Setting items of each machine: [SIZE] [STYLE]
See the operation manual of each machine for details.

3-11
Making Register Marks

4
Register marks are created.
Output this data to the printer.

• Creating one register mark, a new register mark data is created in the new layer as [FC
Register Mark Layer 1], [FC Register Mark Layer 2]...
Please note that FineCut recognizes only one set of register mark. When two or more register
mark sets are created, set unnecessary register mark undisplayed.

3-12
Cutting an Object
CG-EX series
Detect the register marks and cut the object.

1
Set the printed sheet on the plotter to
detect register marks.
• For the procedure of register mark detection, refer to the operation manual of the plotter.

2
Click [Plot] button in the FineCut
Command Bars.

• When an unnecessary object to cut exists on CorelDRAW, select objects to be

3
cut and register marks, and click [Plot Selected Path].

3
Click [Register Mark] tab and click
[Detect Mark].
• Register mark is detected.

Creating Register Marks

• To cancel the register mark
detection, click [Exit Detection].

4 Click (Plot button).

5
Click [Plot] to start cutting.

3-13
CG-FX/ CG-FXII/ CG-75ML/ CG-60SR/ CG-SRII/ CG-SRIII/
CJV30/ TPC/CJV300/CJV150 series
• If [Other CG Series] is selected on [Plotter] screen of Plotter / User Setup, register marks
cannot be cut.

Cutting one image continuously

• Use only one set of register mark on CorelDRAW.

If printing the same data multiple times, use the copy function of your print software (RIP).
• Align the images to X/Y (vertical/horioantal) direction.

• When CJV30/ CJV300/ CJV150 series or TPC is used, you can print & cut by one operation
working with RasterLink. ( P.4-12)

1
Set a printed sheet on the plotter to
detect register marks.

2
Click [Plot] button in the FineCut
Command Bars.

• When an unnecessary object to cut exists on CorelDRAW, select objects to be

cut and register marks, and click [Plot Selected Path].

3
Click [Register Mark] tab and click
[Detect Mark].
• Register marks are detected.

3-14
Cutting an Object

4
Set register marks to detect
continuously.
• To cancel register mark detection, click [Exit
Detection].

Leaf Mode
Roll Mode

Item Description
ID Certification Mode ( P.3-18)
Roll Mode/Leaf Mode*1 Select the sheet to cut.
In case the number is indefinite, input “9999” (the maximum
Repeat
numbers).
Roll Mode
Leaf Mode
Set the data numbers to vertical and horizontal direction.
Set the sheet numbers to replace. 3
First Time Select the first detection points of the register mark.
Search
Position Select the second and the subsequent detection points of the
Continue
register mark.
*1. The CJV300 / 150 series does not correspond to the Leaf Mode.

Creating Register Marks

• When detecting a large data, increase the mark detection points to cut more
precisely.
When detecting a small data, decrease the detection points of “Continue” to
reduce the detecting time.
• When there is the intermediate register mark,
four positions detection is set for the detection
point both for the first time and the second time.
You cannot select other than above.

5
Click (Plot button).

3-15
6
Click [Plot] to start cutting.

In case of Auto Cut

(When CG-FX/FXII/75ML, CJV30/TPC/CJV300/CJV150 series is selected)
• Checking [Auto Cut] in Plot Out screen enables sheet to cut automatically after
each cutting.
To execute auto cut, make sure to check [Auto Cut] in this screen.
Even if ON is set on the plotter, auto cut is invalid unless [Auto Cut] is checked on
Plot Out screen. Even if OFF is set on the plotter, auto cut is valid with [Auto Cut]
checked on Plot Out screen.
• Click [Set...] below [Auto Cut], and set in detail as follows.

Set the length from the last line to the cutting

point. (See the figure A below).

Check to cut the data at every line.

(See blue line below)

<Cut
A

<Cut

7 (Following steps are only for cutting

with several leaf sheets)

• The CJV300 / 150 series does not correspond to the Leaf Mode.

• After cutting the first sheet, a message appears CHANGE SHEET

on the plotter. Set the next sheet.

3-16
Cutting an Object

8
The register marks are detected
automatically and the data is cut.
• Repeat the step 7 and 8 for the number of the
sheet.

• When using CG-FX/CG-FXII, register marks are automatically detected.

When using the other models, detect the register marks manually every time the
sheet is replaced. For the details, refer to the operation manual of the plotter.

• When the sheet printed by the printer with take-up function (MIMAKI JV series etc.) is rolled

3
on a paper core
• The paper core can be set to the plotter without rewinding, and it can be cut continuously.

Plotter
Printer (The image is turned as the
figure below and cut.)
Outputting Direction

Plotting Direction

Creating Register Marks

(1) After the step 2, click the Turn button to 180 degrees in the [Layout] tab.

(2) Work from the step 3.

3-17
• When the continuously-printed data does not fill a part of the lines
• Cut the data in twice to cut all the data.

Printer Plotter

Plotting Direction
Outputting

Second cutting data

First cutting data

Cutting multiple images continuously (CG-75ML only)

For multiple different images, the plotter automatically cuts on the accurate position with the ID pattern
register mark.

• Standardize the shape, the size, the line width of the register mark. If a different shape of the
register mark is mixed, the register mark cannot be detected precisely.
• Use only one set of register mark on CorelDRAW. If printing the same data multiple times,
use the copy function of your print software (RIP).
• To use the ID pattern register mark, be sure to select “1pt” on “MARK DETECT” of the plotter
as the number of register mark detection.
• Set the plotter origin (“ORGN SELECT”) to “LOWERrightORIGIN”.
• Align the register mark on the right side (origin side) for printing.

Plotting direction

• Do not locate the different image to Y (horizontal) direction.

Plotting direction

Not Good

3-18
Cutting an Object

1
Set the printed sheet on the plotter to
detect register marks.
• For the procedure of register mark detection, refer to the operation manual of the plotter.

• When loading a printed media in a direction opposite to the print, be sure to

detect the register mark at the lower left.

Plotting
direction

Setting to the opposite direction Setting to the same direction

2
Click [Plot] button in the FineCut
Command Bars.

Creating Register Marks

• When an unnecessary object to cut exists on CorelDRAW, select objects to be
cut and register marks, and click [Plot Selected Path].

3
Click [Register Mark] tab and click
[Detect Mark].
• Register marks are detected.

• When cutting with ID certification mode, rotating direction is recognized

automatically.

4
Confirm that [ID Certification Mode]
is checked.

3-19
5
Click (Plot button).

6 Click [Plot].
• Data is sent and the plotter enters Local mode.
( P.3-16 for auto cut)

7
Repeat the step 2 to 6 for the other
data to be cut continuously at a time.

• Sending order of data is not necessary to be the same as the order of printing.

8 Press [REMOTE] button on the plotter.

• Cutting starts.

3-20
Cutting an Object

Cutting an outline and a base sheet cutline at a time

(except CG-FX/CG-FXII)
An outline of sticker and a dotted line to separate the base sheet (called HALF cut) can be cut at a time.

1
Create an image with multiple layers
on CorelDRAW, and print the object.
• Example:
FC Contour Layer1  An outline of sticker

FC Contour Layer2  A cutline to separate the

base sheet
(This line is created by selecting [Leave a
rectangle as the cutting line] when creating

3
register marks. P.3-5) Outline of sticker
Cutline for base sheet

Creating Register Marks

2
Set a printed sheet on the plotter to detect register marks.
• For the procedure of register mark detection, refer to the operation manual of the plotter.

3
Click [Plot] button in the FineCut
Command Bars.

4
Click [Layer] tab and set the cutting
condition for each layer.
• Example:
(1) Select [Specify The Tool on Each Layer].
(2) For FC Coutour Layer1  Select [CT1].
For FC Contour Layer2  Select [HLF].
( P.5-14 for details)
2

3-21
5
Adjust the protrusion of the cutter blade and cutting pressure for
each tool.
• Adjustment of the protrusion of the cutter blade:
Refer to “Cut pressure according to each tool” in the operation manual of the plotter.
• Cutting pressure of each tool:
[CT1]  Pressure where cutter blade track remains on the base sheet
[HLF]  Pressure to cut out the base sheet

6
Click [Register Mark] tab and click
[Detect Mark].
• Register mark is detected.

7 Click (Plot button).

8
Click [Plot] to start cutting.

9
After cutting, separate the base sheet.

3-22
Cutting an Object

CF2/DC/CF3 series
Cutting register marks

1
Set a printed sheet on the plotter to
detect register marks.
• For the procedure of register mark detection, refer to the operation manual of the plotter.
• Set the light pointer to the right position depending on the mark shapes.
See “ Register Mark Detection Procedure “ in the operation manual of each
plotter for details.

2
Click [Plot] button in the FineCut
Command Bars.
3
• When an unnecessary object to cut exists on CorelDRAW, select objects to be
cut and register marks, and click [Plot Selected Path].

3
Click (Turn button) to adjust the

Creating Register Marks

direction of the image on the plotter
with the display of FineCut.

4 Click [Register Mark] tab and click

[Detect Mark].
• Register mark is detected.

3-23
5
Select the cutting type.

Multi Mode Single Mode

Item Description
Size Adjust When the size of an actual image and a printed image are
different, check this to cut a frame aligning with the printed
media.
Multi Mode / Single Mode • Multi Mode:
Select when cutting plural images printed on one media.
• Single Mode:
Select when cutting sheet with one set of register mark.
Repeat • If cutting continuously:
Input the number of the sheet for cutting continuously.
• If not cutting continuously:
Check both directions are set to “1”.
Reverse Cut Mode Check if cutting from the reverse side.
Check this when cutting the media that cannot be cut finely
from the printed face such as a corrugated board.
( P.3-28)

• If is selected on [Mark Shape] when creating the register

marks, this function is disabled.
Search Position Select the search position (1/2/4 points).

6 Click (Plot button).

• To set the plot condition on each color /layer, select [Specify The Plot Condition
On Each Color / Layer] on Plot screen and set them. ( P.5-14)

7
Click [Plot] to start cutting.

3-24
Cutting an Object

8
(The followings are operations for
cutting plural sheets in single mode.)
After cutting the first sheet, put the
next sheet on the plotter.

9
Press the key of the plotter, and select “Resume“.
• Press the CE key to cancel continuous cutting.

10
Detect register marks.
• For the procedure of register mark detection, refer to the operation manual of the plotter.

3
11
Click (Plot button).

Creating Register Marks

12
Click [Plot] to start cutting.
• Repeat the step 8 to 12 for the number of the
sheet.

3-25
Cutting with Mark Separation
The large data that cannot be cut in one time can be cut in several times.

• When making register marks, select [Mark Separation]. ( P.3-8)

If [Mark Separation] is not selected, the data cannot be cut separately.

1 Select the data separated by [Mark Sep-

aration] on CorelDRAW.

2
Click [Plot] button in the FineCut
Command Bars.

3
Click [Register Mark] tab and click
[Detect Mark].
• Register mark is detected.

4 Set the register marks.

• Cut Area No.:
Check it is “1”.
• Search Position:
Select the search position of the register mark
(1 / 2 / 4 points).

5
Click (Plot button).

6
Click [Plot] to start cutting.

3-26
Cutting an Object

7
When cutting is completed, move the
media.
• When moving the media, place the all register
marks of the cutting area in the effective cutting
area of the plotter.

• When cutting with Mark Separation is performed, the plotter displays [***OFF
SCALE***], but it does not pose any problem to the operation.

8
Detect register marks of the cut area “2”.

3
• For the procedure of register mark detection, refer to the operation manual of the plotter.

9
Set the register marks.
• Cut Area No.:
Change to “2”.
• Search Position:

Creating Register Marks

Select the search position of the register mark
(1 / 2 / 4 points).

10
Click (Plot button).

11
Click [Plot] to start cutting.
• Repeat the Step 7 to 11 for each of the divided
register mark.

3-27
Cutting from the reverse side
Images can be cut from the reverse side, not from the printed (front) side.
Use this function when the media (such as cardboard) is not finished fine by cutting from the front side.

• When using Reverse Cut Mode, set the register mark size adjusting to the mark chip used. If
the register mark is too small, you may not be able to insert the mark chip.
• Use the media of 3 mm or more thickness.

1
Turn the printed face up, set the media to the plotter, then detect the
register marks.
• For the procedure of register mark detection, refer to the operation manual of the plotter.

2 Click [Plot] button in the FineCut

Command Bars.

• When an unnecessary object to cut exists on CorelDRAW, select objects to be

cut and register marks, and click [Plot Selected Path].

3
Click [Register Mark] tab and click
[Detect Mark].
• Register mark is detected.

3-28
Cutting an Object

4
Set the reverse cutting.
• Reverse Cut Mode:
Check and select [Surface Register Mark Cut].
• Search Position:
Select the search position of the register mark
(2 / 4 points).
• Before selecting [Surface Register Mark Cut], make sure that there is no mark
chip on the position of the register mark. Cutting register marks with the mark
chip set is very dangerous because the mark chip could come off by the cutter.
• When [Surface Register Mark Cut] is selected, Search position (1 point) is
invalid.

5
Click (Plot button).

6
Click [Plot] to start cutting.

Creating Register Marks

7
Turn back the media, and set it to the plotter.

8
Insert the mark chips using the cut
marks.
• Use the mark chips in place of the register
marks.

9
Detect register marks.
• For the procedure of register mark detection, refer to the operation manual of the plotter.

3-29
10
Set the reverse cutting.
• Reverse Cut Mode:
Check and select [Backside Data Cut].
The read data is displayed upside down.
• Search Position:
Select the search position of the register mark (1 /
2 / 4 points).

11
Click (Plot button).

12
Click [Plot] to start cutting.

3-30
Cutting an Object

CFL-605RT
Cutting register marks

2
Click [Plot] button in the FineCut
menu.
3
• When an unnecessary object to cut exists on Corel Draw, select objects to be cut
and register marks, and click [Plot Selected Path].

3
Click (Turn button) to adjust the

Creating Register Marks

direction of the image on the plotter
with the display of FineCut.

4 Click [Register Mark] tab and click

[Detect Mark].
• Register mark is detected.

3-31
5
Select the cutting type.

Multi Mode Single Mode

• If is selected on [Mark Shape] when creating the register

marks, this function is disabled.
Search Position Select the search position (1/2/4 points).

6
Click (Plot button).

• To set the plot condition on each color /layer, select [Specify The Plot Condition
On Each Color / Layer] on Plot screen and set them. ( P.5-12)

7
Click [Plot] to start cutting.

3-32
Cutting an Object

8
(The followings are operations for cutting plural sheets in single
mode.) After cutting the first sheet, put the next sheet on the plotter.

9
Press the key of the plotter, and
select “Resume”.
Press the END key to cancel continuous cutting.

10
Detect register marks.
• For the procedure of register mark detection, refer to the operation manual of the plotter.

11
Click (Plot button).
3

Creating Register Marks

12
Click [Plot] to start cutting.
• Repeat the step 8 to 12 for the number of the
sheet.

3-33
Cutting with Mark Separation
The large data that cannot be cut in one time can be cut in several times.

• When making register marks, select [Mark Separation]. ( P.3-9)

If [Mark Separation] is not selected, the data cannot be cut separately.

1
Select the data separated by [Mark Sep-
aration] on Corel Draw.

2
Click [Plot] button in the FineCut
menu.

3
Click [Register Mark] tab and click
[Detect Mark].
• Register mark is detected.

4 Set the register marks.

• Cut Area No.:
Check it is “1”.
• Search Position:
Select the search position of the register mark
(1 / 2 / 4 points).

5
Click (Plot button).

6
Click [Plot] to start cutting.

3-34
Cutting an Object

The effective cutting

7
When cutting is completed, move the
media.
• When moving the media, place the all register
Cut Area2
marks of the cutting area in the effective cutting
area of the plotter.
Cut Area1
Register Mark

• When cutting with Mark Separation is performed, the plotter displays [***OFF
SCALE***], but it does not pose any problem to the operation.

8
Detect register marks of the cut area
“2”.
• For the procedure of register mark detection, refer to the operation manual of the plotter.
3
9 Set the register marks.
• Cut Area No.:

Creating Register Marks

Change to “2”.
• Search Position:
Select the search position of the register mark
(1 / 2 / 4 points).

10
Click (Plot button).

11
Click [Plot] to start cutting.
Repeat the Step 7 to 11 for each of the divided
register mark.

3-35
Reverce Cut
Images can be cut from the reverse side, not from the printed (front) side.
Use this feature if draw ruled line to the nonprinting side (surface) or the media that is not clean finish when
cut from the surface side, such as cardboard.

Cuts the outer frame of the registration

marks (shown as the blue line below).
(The gray part of the work is not used.)

Crop the center part of the cut

area, then flip the work over so that
the work is upside down.

• Before performing the reverse cut, set "cut offset" of plotter.

Setting of cut offset is always required for the first time reverse cut and resetting by removing
“work guide. Every setting is not required.
• To set the cut offset, specify the tool of this offset cut (reads the surface register mark and cut
to square).
• For more information, refer the instruction manual of the plotter.

• You can the “Reverse Cut” function of the CFL-605RT to perform the following operations not
usually available with conventional printers.
(1) After performing a front g reverse side process once, you can then perform all following
front/reverse-side work by using only the plotter ( P.3-38).
(software version 8.5 or later must be used)
• Use of FineCut 8 (software version 8.5 or later) and CFL-605RT simplifies work by allowing you to use
only the plotter for the second and all following sheets by performing only the first task by using FineCut
8.
(2) By first continuously performing front-side work, reverse-side work is performed afterward
only for the number of sheets required. ( P.3-42) (software version 8.6 or later must be used)
• After first completing front-side work for multiple sheets, reverse-side work can be performed after-
wards for only the required number of sheets of those for which front-side work has been completed.

3-36
Cutting an Object

● Reverse Cut Use Application

“Reverse Cut” procedures differ depending on how it is applied. This section provides an overview of the oper-
ation procedures.

• For more detailed operating procedures, first be sure to fully understand the overview
presented in this section, and then refer to the corresponding procedures on P.3-38 and P.3-
42.

Perform “Reverse Cut” of multi-

Perform “Reverse Cut” of multi-
Perform “Reverse Cut” on single ple sheets in the same pattern.
ple sheets in the same pattern.
sheets that have already been ( P.3-42)
( P.3-38)
printed. ( P.3-38) (First perform “Outer Frame Register Mark Cut”
(Continuously perform “Outer Frame Register
of all sheets, then perform “Backside Data Cut”
Mark Cut” and “Backside Data Cut”.)
only for the required number of sheets.)

Select “Detect Mark” mode and specify the “Outer Frame Register Mark Cut” settings.

3
• Perform step 1 to 3 of “Perform Reverse Cut”.
• If performing continuous cutting, set [Repeat] in procedure 3 to “multiple sheets”.

Perform “Outer Frame Register Mark Cut” on the plotter.

• Perform step 4 to 8 of “Perform Reverse Cut”.
• The plotter status goes back to Local when it’s finished.

Creating Register Marks

Perform “Backside Data Cut”. Continuously perform “Outer
• Perform step 10 to 14 of “Perform Reverse Cut (if continuously performing “Outer Frame Register Mark Cut” for the
Frame Register Mark Cut” and “Backside Data Cut” of the front side)”. specified number of sheets.
• Perform step 10 of “Perform Reverse
Cut (If performing“Outer Frame Regis-
ter Mark Cut” and “Backside Data Cut”
Continuously perform “Backside separately.)”.
Data Cut” for the specified num-
ber of sheets. “Backside Data Cut”
• Perform step 15 of “Perform Reverse is performed for the
Cut (if continuously performing “Outer required number of
sheets for some time.
Frame Register Mark Cut” and “Back-
side Data Cut” of the front side)”.

Perform “Backside Data Cut”.

• Perform step 11 to 16 of Perform
Reverse Cut (If performing“Outer
Frame Register Mark Cut” and “Back-
side Data Cut” separately.)”.

Continuously perform “Backside

Data Cut” for the specified num-
ber of sheets.
• Perform step 17 of “Perform Reverse
Cut (If performing“Outer Frame Regis-
ter Mark Cut” and “Backside Data Cut”
separately.)”.

3-37
● Perform Reverse Cut (if continuously performing “Outer Frame Register Mark Cut” and
“Backside Data Cut” of the front side)

1
Click [Plot] button in the FineCut
menu.

• When an unnecessary object to cut exists on Corel Draw, select objects to be cut
and register marks, and click [Plot Selected Path].

2
Click [Register Mark] tab and click
[Detect Mark].
• Register mark is detected.

3
Set the “Outer Frame Register Mark Cut”.
• Check the “Reverse Cut Mode”.
[Outer Frame Register Mark Cut] : ON
[Repeat Frame Cut] : OFF
• Search Position:
Search position of register mark is only four
points.

• If you select "Outer Frame Register Mark Cut", only the outer frame around the
register mark is cut.
When the path in the color/layer has been selected (cut data is displayed on the
preview), data is not cut.
• Input the number of sheets to cut in the [Repeat] field if cutting multiple sheets.

3-38
Cutting an Object

4
Set the work to the plotter in the
same orientation as the preview
display, and detect the lower-left
registration mark.
• For the procedure of register mark detection,
refer to the operation manual of the plotter.

• Detecting the registration marks Light pointer Light pointer

3
Align the light pointer with the edges of the registration :Light pointer position
mark by referring to the figure on the right.
• Moving the light pointer
After sheet replacement, press [VACUME], then use the jog key to move the light
pointer.

5
Press the key, set the plotter to remote.

Creating Register Marks

•The after 2nd time, press [VACUUM].

6
Click (Plot button).

7 Click [Outer Frame Cut] to start

cutting.

3-39
8
If “Outer Frame Register Mark Cut”
is performed, the area around the
register marks is cut out in a square.
• Output conditions in the case of cutting this
square is set in the plotter side.
• In the following procedure, only the cut media
will be used. (The gray part shown on the right
illustration is not used.)

9
When the surface cut is completed, automatically becomes to a
local mode. The head will be saved in the top right corner.
• Vacuum also turned OFF.

10
Turn the work upside down to be in
the same direction as the preview
display, then set to the plotter.
• Set the work you cropped in Step 8 to the
plotter.
• When cut the reverse, it will be opposite to the
printing surface. (Upside down)
• Cut out square with the outer frame register mark
cut. At the reverse cut, turn upside down and set
by butting the lower left corner against the work
guide.
• Be careful for setting thin media, since it may
accidentally get into the work guide. Register mark

Work guide

11
Press the key, set the plotter
to remote.

3-40
Cutting an Object

12
Set the reverse cutting.
• Check the “Reverse Cut Mode”.
[Backside Data Cut] : ON
[Repeated Reverse Cut] : OFF
• Search Position:
Search position of register mark is only four
points.
• Color / Layer cut selection
Select the pass to cut on the reverse. If
uncheck the pass, the pass in preview display
also will not be displayed.
• Input the number of sheets to cut continuously in the [Repeat] field in step 3 if
“Repeated Reverse Cut”.

13
Click (Plot button). 3

Creating Register Marks

14
Click [Plot] to start cutting.

• When reverse cut mode is use, it

becomes only single mode.

15
Repeatedly perform the following step (1) to (3) if continuously
cutting only the specified number of sheets of the same data.
(1) Detect the front side registration marks by referring to step 4 and 5, and change to remote mode.
(2) Remove the frame by referring to step 8.
(3) Perform “Backside Data Cut” by referring to step 10 and 11.
• For the procedure of register mark detection, refer to the operation manual of the plotter.

• These operations are not necessary if [Repeat] is not set in step 3.

3-41
● Perform Reverse Cut (If performing“Outer Frame Register Mark Cut” and “Backside Data
Cut” separately.)

1
Click [Plot] button in the FineCut
menu.

• When an unnecessary object to cut exists on Corel Draw, select objects to be cut and
register marks, and click [Plot Selected Path].

2
Click [Register Mark] tab and click
[Detect Mark].
• Register mark is detected.

3
Set the “Outer Frame Register Mark
Cut”.
• Check the “Reverse Cut Mode”.
[Outer Frame Register Mark Cut] : ON
[Repeated Frame Cut] : ON
• Search Position:
Search position of register mark is only four
points.

3-42
Cutting an Object

• Detecting the registration marks Light pointer Light pointer

5
Press the key, set the plotter to remote mode.

Creating Register Marks

• The after 2nd time, press [VACUUM].

6 Click (Plot button).

7
Click [Outer Frame Cut] to start
cutting.

3-43
8
If “Outer Frame Register Mark Cut”
is performed, the area around the
register marks is cut out in a square.
• Output conditions in the case of cutting this
square is set in the plotter side.
• In the following procedure, only the cut media
will be used. (The gray part shown on the right
illustration is not used.)

9
When the surface cut is completed, automatically becomes to a
local mode. The head will be saved in the top right corner.

• Vacuum also turned OFF. SHE E T EXCHANGE

The right message is apper on the display. VAC：S T AR T ED : F I N

10
Repeatedly perform step 4 and 5 only for the number of sheets
specified in step 3 if performing “Outer Frame Register Mark Cut”
for multiple sheets of the same data.
• This completes the front side operations.

11
Detect the lower-left registration
mark on the front side of the media
whose outer frame has been
removed, then press .
• Set the work to the plotter in the same
orientation as the preview display, and detect
the lower-left registration mark.
• For the procedure of register mark detection, refer
to the operation manual of the plotter.
• Press the [REMOTE] key, the plotter becomes to a remote mode.

• Detecting the registration marks Light pointer Light pointer

• The light pointer alignment position and movement position at position at
procedures during registration mark detection using the
plotter are different for the first time, and the second and
following times.
• Light pointer position
Align the light pointer with the edges of the registration :Light pointer position
mark by referring to the figure on the right.
• Moving the light pointer
After sheet replacement, press [VACUME], then use the jog key to move the light
pointer.
• Switching to remote mode
Press [ENTER] to change mode.

3-44
Cutting an Object

12
Set the reverse cutting.
• Check the “Reverse Cut Mode”.
[Backside Data Cut] : ON
[Repeated Reverse Cut] : ON
• Search Position:
Search position of register mark is only four
points.
• Color / Layer cut selection
Select the pass to cut on the reverse. If
uncheck the pass, the pass in preview display
also will not be displayed.

• Input the number of sheets to cut continuously in the [Repeat] field in step 3 if
“Repeated Reverse Cut”.

3
13
Click (Plot button).

Creating Register Marks

14
Click [Plot] to start cutting.

• When reverse cut mode is use, it

becomes only single mode.

15
After registration marks are detected in four locations, operation
automatically changes to local mode. The head will be saved in the
top right corner.

• Vacuum also turned OFF. MED I A RE V ERS E

The right message is apper on the display. AND PUSH [ REMOT E ]

3-45
Cutting an Object

16
Perform the following in order to cut
the reverse side.

(1) Turn the work upside down to be in the same

direction as the preview display, then set to the
plotter.
• When cut the reverse, it will be opposite to
the printing surface. (Upside down)
• At the reverse cut, turn upside down and set
by butting the lower left corner against the
work guide.
(2) Press the [REMOTE] key, the plotter becomes to
a remote mode

• Be careful for setting thin media, since it may

accidentally get into the work guide. Register mark

Work guide

17
Repeatedly perform the following step (1) to (2) if reverse side
cutting only the specified number of sheets of the same data.
(1) Perform reverse side registration mark detection again (four points) by referring to step 11.
(2) Cut the reverse side by referring to step 16.
• For the procedure of register mark detection, refer to the operation manual of the plotter.

• These operations are not necessary if [Repeat] is not set in step 3.

3-46
CHAPTER 4
Advanced operations-from FineCut Command Bars

This section describes the convenient usage from FineCut Com-

mand Bars.

FineCut command

Recognizing Stroke Weight and Overlap................. 4-2

Trapping .................................................................. 4-3
Joining Paths ........................................................... 4-4
Making a Precut Line around an Object .................. 4-5
Creating Shadow / Edge.......................................... 4-7
Importing / Outputting Plot File ................................ 4-8
Extracting the Outline ............................................ 4-10
Outputting to RasterLink (CJV30/TPC/CJV300/CJV150
series).................................................................... 4-12
Setting Output Condition ....................................... 4-18
Separating and Cutting Lines (CF/DC/CF2/CF3 (except
M-Head) series)..................................................... 4-20
Recognizing Stroke Weight and Overlap
To cut objects in the same shape as displayed on the monitor, recognize the stroke weight and overlap of
objects.

1
Select an object on CorelDRAW.

2
Click [Recognize Stroke Weight And
Overlap] button in the FineCut
Command Bars.

3
The stroke weight and overlap are
recognized.

4-2
Trapping
On the overlapping objects, a gap may be generated where the colors are overlapping.
Trapping can prevent the gap.
• When trapping complicated figures, error or CorelDRAW crash may occur and the data may
be broken. Save the data first, and then trap.

1
Select an object on CorelDRAW.

2
Click [Trapping] button in the
FineCut Command Bars.

3
Set the trap size and overlapping
order.
4
Click [OK] after setting.

• Drag the list to change the overlapping order.

4 Advanced operations - from FineCut Command Bars

Overlap space is created in the
specified size.

4-3
Joining Paths
Corner points of an open path (the start and the end point is not connected) can be joined.
When reading DXF data into CorelDRAW, some paths that look connected are separated into several lines.
If cutting this, pen-up occurs on every line. With CF3 series (M-Head), it cannot cut considering the endmill
diameter.
Joining paths solves these problems.

1
Select the all paths to be joined on
CorelDRAW.

2
Click [Join Path] button in the
FineCut Command Bars.

3
Set the distance between the corner
points to be joined.
Click [OK] after setting.

• When the distance between the corner points is longer than the set value, they
are not joined.
Checking the paths on CorelDRAW, set the value to join the paths.

4
The paths are joined.

4-4
Making a Precut Line around an Object
When creating stickers, a precut line (called “Weed line”) around the object enables to tear off the sticker
with ease.
This describes how to make a weed line and a frame.
• Do not set the weed line on a thick sheet. The line may damage the object.

1
Select an object on CorelDRAW.

2
Click [Create Weed Line] button in
the FineCut Command Bars.

3
Set the Weed Line.
Preview
After setting, click [OK] .

Advanced operations - from FineCut Command Bars

Item Description
Preview Check the position and the number of weed lines.
Frame Offset Set the distance between the object and the frame.
Make the line on the needed position with the needed numbers.
Free Select the direction of the line in [Direction], and click on the preview
to make the line.
Interval
Divide Set the dividing numbers to both horizontal and vertical directions.
Set the distance between the objects to both horizontal and vertical
Distance
directions.
[Clear] Delete all the weed lines except frames.
Select the direction of a weed line to be created. It is used when
Direction
[Free] is selected on [Interval].

4-5
Making a Precut Line around an Object

4
Weed lines are created.
The example shown on the right is set as follows;
Frame Offset: 5mm each
Interval-Divide: 2 each

Weed line Frame

• To delete the created weed line, select [Remove Weed Line] from the FineCut
Command Bars.

4-6
Creating Shadow / Edge
Create a shadow / edge of an object.

1
Select an object on CorelDRAW.

2 Click [ShowShadowEdgeTool] button

in the FineCut Command Bars.

3
The [ShowShadowEdgeTool] bar is
displayed.
Use this tool to create a Shadow Type or Edge as shown below.
Shapes:

Drop Box Perspective Cast Edge 4

• Specify RGB colors for the shadow/edge. If the object color mode is CMYK, it
may not be able to display by the specified RGB colors.
In this case, it is converted to the representable colors of the nearest CMYK.

Advanced operations - from FineCut Command Bars

4-7
Importing / Outputting Plot File
Importing a plot file
Plot files created with cutting software other than FineCut can be imported to CorelDRAW.
You can edit the imported plot files on CorelDRAW and plot them from FineCut.

1
Click [Import Plot File...] button in the
FineCut Command Bars.

2 Select a file to import, and click

[Open].

• The importable plot commands are MGL-IC, MGL-IIC, and HP-GL.

3
Select the step size for the file to
import.
Click [OK] after selecting.

4
The imported file is
displayed.

• The image may be rotated and displayed depending on the application that the
plot file is created.

4-8
Importing / Outputting Plot File

Outputting a plot file

Plot files created with cutting software can be output to the plotter.

1
Click [Output Plot File] button in the
FineCut Command Bars.

2
Select a file to output, and click
[Open].

Advanced operations - from FineCut Command Bars

4-9
Extracting the Outline
Create an outline to cut an image data with no path and readable on CorelDRAW such as bitmap, JPEG, or
TIFF image.
You can also create an outline only in the same color area by specifying the color.

Trace simply
The outline of an image data can be created easily.

1
Select an object on CorelDRAW.

2
Click [Outline Tools] button in the
FineCut Command Bars.

• If an message “The error occurred” appears, and contour definition cannot be

processed, convert the file to BMP/JPG/GIF/TIF and try again.

3
Click [Trace execute] button.
To change the tracing area, drag the slider while
checking the preview.

To check the traced image on the preview, click

[Trace] button.

( P.7-29 for other items)

• Clicking [Trace execute], a new layer is created as [FC Trace Layer 1], [FC Trace
Layer 2...]. Use this to set cutting condition for each layer. ( P.5-14)
• The data in this layer is set to non-printing, since it is used as cutting data.
To print this data, enable “Printable” on CorelDRAW “Layer properties”.

4
An outline is created on the [FC
Trace Layer] of CorelDRAW.

4-10
Extracting the Outline

Trace with detail setting

Use this tab when setting the object traced at [Trace simply] in detail, or when tracing a specific color or
area of the object.

1
After executing [Trace Simply], click
[Trace with detail setting] tab.

2
Set the tracing and click [Trace exe-
cute] button.
Select the tracing area and set the tracing while
checking the preview. 4
( P.7-29 for other items)

Advanced operations - from FineCut Command Bars

3
An outline is created on the [FC
Trace Layer] of CorelDRAW.

4-11
Outputting to RasterLink (CJV30/TPC/CJV300/CJV150 series)
When using CJV30/ CJV300/ CJV150 series or TPC, data can be easily printed & cut linking FineCut with
RasterLink. (It supports RasterLink Pro 4 or later)

• To cut an object, set the path for printing in advance. ( P.4-16)

1
Start RasterLink.
If there is no hot folder, create it on RasterLink.
If outputting from Macintosh, set the hot folder.
For details, see the RasterLink Reference Guide or the Installation Guide.

2
Click [Plotter / User Setup] button in
the FineCut Command Bars.

3 Select CJV30/ CJV300/ CJV150

Series or TPC on [Model].

• When a model other than CJV30/ CJV300/ CJV150 series or TPC is selected, an
error appears when clicking [Output to RasterLink] on the next step.

4
Click [Output to RasterLink] button in
the FineCut Command Bars.

• When a hidden layer is found, the following error appears.

In this case, show or delete the layer.

Error message

Show or delete the

hidden layer.

4-12
Outputting to RasterLink (CJV30/TPC/CJV300/CJV150 series)

5
Click [Select Hot Folder...].
Select a hot folder of RasterLink.
If there is no hot folder, create it on
RasterLink.

• The followings may occur on the preview above, however, they are correctly
printed.
• Display colors may differ from actual colors displayed on CorelDRAW.
• On CorelDRAW X3, background of overlapped part of layers turns white.
To solve this, download and apply the following service packs.
Hot Patch 1, SP1, SP2
For details, see the CorelDRAW’s website.
• Create a hot folder on RasterLink.

Advanced operations - from FineCut Command Bars

4-13
6
Select and set the layers to
print or cut.

Printer Cutting Setting by layer

icon icon

Item Description
Printer icon Click to put a mark on the printing layer.
Cutting icon Click to put a mark on the cutting layer.
Setting by layer Click button and select [Specify the Cut Condition on Each
Layer] or [Specify The Tool On Each Layer].
Then, select the cutting condition or tools on the right column of
the layer names.
• When both the print and the cut are marked on the Layer screen shown
above, the plotter prints, and then cuts the object. If the printing layer has a
register mark created with the register mark creation of FineCut, it reads the
register mark position after printing, and cuts on the more accurate position.
• When only cutting is marked on the layer screen, include the register mark in
the cutting layer to cut with the register mark loaded.
• If not setting [Specify the Cut Condition on Each Layer] or [Specify The Tool
On Each Layer], it plots with the setting of the plotter.
• Data is placed with the margin of 0.5mm around.

• When cutting with the register mark loaded, set [1Pt] on [MARK DETECT] of
CJV30/ CJV300/ CJV150 or TPC as the number of register mark detection.
• When creating the register mark on the register mark creation of FineCut,
uncheck [Leave a rectangle as the cutting line]. If checked, the plotter cuts
with a part of the rectangle missed. ( P.3-5 )
(Activating [Outer Frame Cut] of Cut Condition screen is recommended.)
• When printing type2 register mark ( ), space between copies for at least
the register mark size. ( P.3-5 )
• Create only one set of register mark on CorelDRAW. Creating plural marks
causes an error.
• When different settings are made for each layer, RasterLinkPro4 Ver.1.1 or
before cuts with the condition shown on the top of the set layer list.
RasterLinkProVI 1.2 or later will cut with each layer setting.

4-14
Outputting to RasterLink (CJV30/TPC/CJV300/CJV150 series)

7
Set the other items if needed.
( P.7-32)

8
Click [Output], then set EPS.
Click [OK] to send the data to RasterLink. Uncheck

EPS setting varies from the CorelDRAW

version used.
The display shown on the right is for
CorelDRAW X3.

• Be sure to uncheck [Include header] on [Image header].

When you use CorelDRAW X3 to X8, check the items below before clicking [OK].
• For CorelDRAW X3 and X4

4
Uncheck Spot colors [Convert spot colors to process] in the [Advanced] tab.

Advanced operations - from FineCut Command Bars

• For CorelDRAW X5 to X8
Uncheck Color Management [Convert spot colors to …] in the [General] tab.

9
Execute printing & cutting on RasterLink.
For details, see the RasterLink Reference Guide.

4-15
How to set cutting paths
When cutting an object, set the path to be cut.

• For the cutting path created at “Frame Extraction”, “Rectangle” of register marks,
and “Outline Extraction”, this operation is not required because cutting layers are
automatically created.

Cut the black line

with the back-
ground printed

1
Open an object on CorelDRAW.
When the Object Manager is not displayed, put
a check on [Object Manager] of [Window] -
[Dockers] menu.

Object Manager

2
Click a path to be cut.
The selected path is colored on the Object
Manager.

Object Manager

4-16
Outputting to RasterLink (CJV30/TPC/CJV300/CJV150 series)

3
Click [Move to the Cut Layer] button
in the FineCut Command Bars.

4
Click [OK] to set the path for cutting.
[FC Cut Layer1] is created and the selected
path is moved into this layer.

Every time executing [Move to the Cut Layer], a

new layer is created as “FC Cut Layer 1”, “FC Object Manager
Cut Layer 2”.

Advanced operations - from FineCut Command Bars

4-17
Setting Output Condition
Output condition can be set by the media used.

• This function is valid only for the MGL-IIc commands.

• If any setting value exceeds the limit of the plotter, the object is plotted with the limit of the
plotter. For the limit, refer to the Operation Manual of the plotter.
• Once output conditions are set for each media with the following steps, the conditions can be
changed by media on Plot Out screen.

1
Click [Plotter / User Setup] button in
the FineCut Command Bars.

2
Click [Output Condition Setup...].
Alternatively, click [Edit] button in the Plot Out
screen.

3
Set conditions on Output Condition
Setup screen.
Setting items differ depending on the model
selected on [Model] of Plotter / User Setup
screen (Step 2).
Set each item and click [Setup]. ( P.7-5)

4
Click [Plot] button in the FineCut
Command Bars.

5
Click (Plot button) on Plot
screen.

4-18
Setting Output Condition

6
Set the plot condition and click
[Plot].
( P.7-26 for details)

• When plotting with “Select Condition” or “Custom” selected, the setting of speed/
pressure/offset of the plotter changes. To restore the setting, set the plotter to
LOCAL mode and press the [TOOL] button.

Advanced operations - from FineCut Command Bars

4-19
Separating and Cutting Lines (CF/DC/CF2/CF3 (except M-Head) series)
• This function can be used on CF series (CF/DC/CF2/CF3 (except M-Head)).
Please note that it cannot be used on CG series.

Some shapes of blade can cut the start / end position of lines too much and scar the product while cutting
thick media.
To avoid this, set to separate lines automatically and to cut in twice, from end to inside, or inside to end.

Cutting with the line separated

1
Select an object on CorelDRAW.

2 Click [Plotter / User Setup] button in

the FineCut Command Bars.

3
Click [Output Condition Setup...].

4-20
Separating and Cutting Lines (CF/DC/CF2/CF3 (except M-Head) series)

4
Set the line separation.
After setting, click [Setup].

Check the Separation cutting

direction and the
Separation position changing
from the Separation origin.
(Displays only when [Line
Separation] is selected.)

Item
Line Separation Check this.
Description
4
separation cutting Select cutting direction of a separated line.
direction Select according to the blade used. ( P.4-24)
minimum line length Set the minimum length of the line to be separated.
(Default: 30 mm Only the longer line than this setting is separated, and the shorter

Advanced operations - from FineCut Command Bars

(recommended)) one is not separated.
(If separating a short line, it may not be able to cut finely.)
minimum line angle Set the minimum angle of the line to be separated.
(Default: 30 degrees If the cutting line is inflected more than the set angle, the line is
(recommended)) separated not the point to be cut too much. (However, if it is deter-
mined as outside of the object, it is not separated.)
If inside (grey part) is used

Even if the angle to the next

cutting is larger than the setting in
the cutting direction, it is not
separated because it is decided
90°
90° If the angle to the next cutting is
larger than the setting in the
cutting direction, and if it could
scar the object, the line is
Not to cut these points,
the line is separated.

separation origin Set the origin position of the separating line.

4-21
Item Description
separation position Set the separating position of lines as a distance from [Separation
origin].

10 mm
Separated on 10 mm from the
End point end point.

5
Click [Plot] button in the FineCut
Command Bars.

6
Click (Plot button).

4-22
Separating and Cutting Lines (CF/DC/CF2/CF3 (except M-Head) series)

7
Set whether using the outside of the
object or not on the Plot Out screen,
and click [Plot] .
The plotter determines as below depending on
the setting, and cuts with the line separated.

If not checked on [Use the Outside] (default)

Grey part is determined as a product.

Not this point to cut too much, the

line is separated and cut.
Cut

If checked on [Use the Outside]

Grey part is determined as a product.

Advanced operations - from FineCut Command Bars

Not this point to cut too much, the
line is separated and cut.

4-23
The blade shapes and the setting of line separation
When cutting with a line separated, set referring to the example below to meet the the shape of the blade
used.
For adjustment of eccentricity, see the Operation Manual of the plotter.

Blade used Product Shape Adjusted eccentricity value Cutting direction

Code and Test cut pattern with the line separated
（ P.4-20）
Carbide, 17° SPB-0065 (For carbide 17°) Ends To Inner
(No uncut part)

End Ends To Inner

point
Start Start
point point

Blade

cutting Adjust the value not the

direction horizontal/vertical lines of the
Carbide, 30° SPB-0045
Test pattern A to protrude or
gap.
Carbide design cut- SPB-0051 • If protruded:
ter, 30° Enter the protruded value by
High-speed steel SPB-0043 negative value.
blade 30° • If gapped:
High-speed steel SPB-0048 Enter the gapped value by
blade 30° 7mm positive value.

Titanium-coated, 30° SPB-0047

By adjusting as above, the
horizontal lines overlap at
the end point.
cutting
direction

Carbide, 45° SPB-0046

High-speed steel SPB-0044
blade 45°
Titanium-coated, 45° SPB-0008

cutting
direction

4-24
Separating and Cutting Lines (CF/DC/CF2/CF3 (except M-Head) series)

Blade used Product Shape Adjusted eccentricity value Cutting direction

Code and Test cut pattern with the line separated
（ P.4-20）
Carbide, 2° SPB-0064 In to out
(No uncut part because the
End
blade top comes to the end
point point.)
Start Start
point point
in to out

Adjust the value to meet the

horizontal lines of the Test
cutting
direction pattern A at the end point.
• If lines overlap:
Enter the overlapped value
divided by 2 by positive value.
• If gapped at the end point:
Enter the gapped value divided
by 2 by negative value.

By adjusting as above, the

4
horizontal lines protrude
from the vertical line at the
start point.

Advanced operations - from FineCut Command Bars

4-25
4-26
CHAPTER 5
Advanced operations-from Plot Screen

This section describes the convenient usage from Plot screen.

To display Plot screen, click [Plot] button in the FineCut
Command Bars.

Scaling an Object .................................................... 5-2

Cutting an Object Multiple Times (Copy)................. 5-4
Dividing and Cutting an Object (Tiling) .................... 5-6
Cutting an Object on Each Color ............................. 5-8
Cutting an Object on Each Layer........................... 5-10
Setting the Output Order/Tool on Each Color/Layer.. 5-
12
Setting Output Condition on Each Color/Layer...... 5-14
Making Effective Use of Sheet .............................. 5-17
Setting Connection to the Plotter........................... 5-19
Setting Head Position after Plotting....................... 5-20
Checking the Cutting Process by Preview............. 5-22
Scaling an Object
Scaling an object with a fixed aspect ratio
Click to uncheck [Unlock Scale] on the Layout tab.
Scale an object as dragging a corner of the object.

It indicates the aspect

ratio is fixed.

5-2
Scaling an Object

Scaling only width or length of an object

Check [Unlock Scale] on the Layout tab.
Scale an object as dragging the left or right corner or the top or bottom corner of the object.

• To scale an object with the aspect ratio retained, check [Unlock Scale], and then drag the
object as holding down the Shift key of the keyboard.

5
• To scale an object with the changed aspect ratio retained, change the width and length
separately, and then uncheck [Unlock Scale].

To scale an object more precisely, enter the values on the [Size] and the [Scale].

Advanced operations-from Plot Screen

5-3
Cutting an Object Multiple Times (Copy)
To cut an object multiple times vertically and horizontally, use Copy.
The following example shows how to cut ABC on A3-sized sheet.

1 Set [Copy] and [Copy Margin].

Example:
• Copy:
Enter 3 for horizontal and 4 for vertical.
• Copy Margin:
Set the margin between objects (horizontally
This includes all margins
and vertically) to 10 mm.
of the object.

2 Check [Frame] and enter the size.

Example:
Enter 5 mm each on the width and the length.
(The frame is put on 5 mm outside of the object.)

This includes the

frame size.

• When Frame is set, the frame is created for each object. You cannot enclose all
the copied objects with a single frame.
• When [CF3 (M-Head)] is selected on Plotter / User Setup screen, note the
followings.
Set [Copy Margin] to 10 mm or more.
Frame cannot be created.

5-4
Cutting an Object Multiple Times (Copy)

3
Click (Plot button).

4 Click [Plot] to start cutting.

Advanced operations-from Plot Screen

5-5
Dividing and Cutting an Object (Tiling)
To create an object larger than the sheet width (signboard, etc.), divide and cut the object with Tiling.
In this section, each divided object is called “Tile”.

1
Click [Tiling] tab.

2
Set how to separate, and click
[Separation].
( P.7-22 for details)

Set how to separate

3
Divided objects are displayed.
Set the tile position or others.
( P.7-22 for details)

5-6
Dividing and Cutting an Object (Tiling)

4
Select tiles to cut from the tile list.

Select

5 Click (Plot button).

6
Click [Plot] to start cutting.

Advanced operations-from Plot Screen

5-7
Cutting an Object on Each Color
If an object consists of multiple colors on CorelDRAW, you can cut out the specified color object.
This describes how to cut out the Cyan (C=100%) colored object “ABC” of the following example.

C=100%

DIC=80p

1
Click [Plot] button in the FineCut
Command Bars.

2
Uncheck the color set of
“DEF” on the example above.
The object “DEF” disappears from the cutting
area.

• Color List
The color list displays all colors (including PANTONE and other special colors)
used for the object. It also displays the colors of fill and strokes of the object.
To specify the output condition, click the button on the upper right of the list.

Click to display the stroke color information.

Click to display the fill color information.

5-8
Cutting an Object on Each Color

3
Set [Origin Lock].

• To cut out the object on the created position, Checked

check [Origin Lock].

• When unchecked, the object is cut at the Unchecked

bottom right of the sheet (bottom left for CF/
CF2/DC series) based on the origin.

4
Click (Plot button).

5
Click [Plot] to start cutting.

Advanced operations-from Plot Screen

5-9
Cutting an Object on Each Layer
If an object consists of multiple layers on CorelDRAW, you can cut out the object on the specified layer.
This describes how to cut out “ABC” on the layer 1 of the following example.

Layer 1

Layer 2

1
Click [Plot] button in the FineCut
Command Bars.

2
Click [Layer] tab and uncheck the
layer of “DEF” on the example above.
The object “DEF” on the layer disappears
from the cutting area.

5-10
Cutting an Object on Each Layer

3
Set [Origin Lock].

Checked
• To cut out the object on the created position,
check [Origin Lock].

• When unchecked, the object is cut at the Unchecked

bottom right of the sheet (bottom left for CF/
CF2/DC series) based on the origin.

4
Click (Plot button).

5
Click [Plot] to start cutting.

Advanced operations-from Plot Screen

5-11
Setting the Output Order/Tool on Each Color/Layer
By specifying output order or the tool by color or layer, objects can be cut more smoothly and finely accord-
ing to the tool characteristic or cutting shapes.
By specifying the tool by color or layer, the order of the several tools’ operation can also be set.

Objects are normally output in order, from the bottom to the top of the color/ layer list.

This describes how to cut the red frame first with the tool [HLF] of the following example.

1
Click [Plot] button in the FineCut
Command Bars.

2
Drag the red in the color list to the
bottom.

3
Click the upper right button of the list
and select [Specify The Tool On Each
Color (or Layer)].

5-12
Setting the Output Order/Tool on Each Color/Layer

4
Select [HLF] for tool.

5
Click (Plot button).

6
Check [Sort], select [Each Color (or
Each Layer)], and click [Plot].
The object is output in the specified order.

Advanced operations-from Plot Screen

5-13
Setting Output Condition on Each Color/Layer
Output condition can be set on each color or layer.
For a fine object or small characters, create an object on each color or layer, and set the appropriate output
condition (lowering cutting speed, etc.) for each. The objects can be cut finely.
In CF/CF2/DC/CF3 series, you can cut and make a ruled line at one time by specifying tools on each color
or layer.

1
Click the button on the upper right of
the color list (or layer list).

2
Select [Specify The Plot Condition
(Tool) On Each Color (Layer)].

3 If the following screen appears, click [OK] .

When [Specify The Plot Condition On When [Specify The Tool On Each Layer
Each Layer (Color)] is selected: (Color)] is selected:

When CF3/CJV30/TPC/CJV300/CJV150 series is used

5-14
Setting Output Condition on Each Color/Layer

When [Specify The Plot Condition On

4
Set the output condition. Each Color] is selected:

Click the button on the right of the condition, and

select from the set condition.

• If set the tool number in the output conditions, check the settings of the tool of
plotter side.
• Check the pen number allocation of plotter side, and set of FineCut.
• If use the tool of B unit in the CFL-605RT, ruling roller, reciprocating cutter,
tangential cutter can not be used at the same time. In the case of "cut with
reciprocating cutter after ruling" or so, output the cut data for each tool.
• To edit the output conditions, click the button on the upper right of the list, and
select [Edit Plot Condition...].

• When specifying the output conditions on each color or layer, you cannot use the
settting on the plotter. Make sure to set the all conditions (Speed/Press/Offset) in
the FineCut.
5
• When items are unchecked or a frame is specified, the media is cut by the default
settings. (CJV30/TPC/CJV300/CJV150/CF3 series is cut by the plotter setting.)

Default Advanced operations-from Plot Screen

Output
Condition Setting

5-15
Setting Output Condition on Each Color/Layer

5
Click (Plot button).

6 Click [Plot].

5-16
Making Effective Use of Sheet
When cutting ABC with different colors each by color as the example below, if A and C are cut, the space of
B becomes blank as B has different color. Move the cutting object to the blank part to cut without wasting
blank.

1
Click [Plot] button in the FineCut
Command Bars.

2
Select an object to move using the

5
(Direct Select Tool).

Select “A” for the example shown on the right.

Advanced operations-from Plot Screen

5-17
Making Effective Use of Sheet

3
Drag the selected object to the
desired position.
To replace the object to the original position, click
(Original Layout button).

Drag

5-18
Setting Connection to the Plotter
The connection to the plotter can be checked or set on the Plot screen.

1
Click (Plotter / User Setup but-
ton).

2
Select the communication port, and
click [Setup].
If needed, click [Connection test] to check the
connection to the plotter.
( P.7-12 for details)

Advanced operations-from Plot Screen

5-19
Setting Head Position after Plotting
You can set the head position after plotting.

1
Click [Plot] button in the FineCut
Command Bars.

2 Click (Plot button).

3
Check [Head Withdrawal After Plot].
To change the head withdrawal position or to set
the origin to the withdrawal position, click [Set]
and go to the next step.

5-20
Setting Head Position after Plotting

4
Change the setting on Head
Withdrawal Position screen.
After setting, click [Setup].

Item Description
Set the head withdrawal position for the horizontal direction from the refer-
ence position (Select [Current Origin] or [Max Cut Width]).
Set the head withdrawal position for the length direction from the refer-
ence position (Select [Current Origin] or [Max Cut Length]).
Set the head withdrawal position as the origin position.
Sheet Feed (Effective only for the MGL-IIc commands on CG/ CJV30 series and TPC.)
Origin Renewal Check this to prevent from cutting on the same position with the previous
cut when plotting continuously with the same sheet.

• In the CJV300 / 150 series, the Head Withdrawal Position is always the origin.
• When using [No. COPIES] or [DIVISION CUT] of the plotter, uncheck the [Sheet
Feed Origin Renewal].
If checked, [No. COPIES] or [DIVISION CUT] will not perform normally.

5 Click [Plot].

5
Plotting starts. The plotter head moves to the
specified position after plotting.

Advanced operations-from Plot Screen

5-21
Checking the Cutting Process by Preview
Before cutting objects, you can check the plotting process with your settings by the preview.

1
Click [Plot] button in the FineCut
Command Bars.

2 Click (Plot button).

3 Set the plot condition, and click

[Preview].
( P.7-26 for details of the setting)

5-22
Checking the Cutting Process by Preview

4
Check the cutting line on the
preview.

• To change the color of [Display Setting], click the color on the right of each
setting.
• When copy or cutting with mark separation is set, the preview displays the object
without copy or cutting with mark separation.

Item Description
Cutting Direction Shows black line for cutting in anticlockwise, and red line for
cutting in clockwise.
Checking [Arrows], cutting direction shows with arrows.
• For an open path, both directions display in black.
Start Position Shows the starting point of cutting in blue.
End Position Shows the ending point of cutting in orange.
Move Shows the moving line raising the tool in yellow.
Cutting Order Shows the numbers of cutting order.

5
Tool Position Shows the tool (head) position in green. Displaying simula-
tion, you can check the moving of the tool.
Show Original Shows the CorelDRAW object that was read by FineCut and
processed on Plot screen in the state before cutting.

5
Click in [Simulation] and check the moves of cutting.

Advanced operations-from Plot Screen

To return to the state before cutting, click . To go to the state after cutting, click .
The slide bar shows the simulation from any position you like.
To set the speed of the simulation, set [Playback Speed].

6
If needed, go back to Step 3 and adjust the plot condition.
• For CF/CF2/DC/CF3 series, you can check the starting position of cutting on the
preview.
To adjust it, go to [Cut Start Position Setting] ( P.6-4) or [Optimize Cutting Start
Position] of Plot Out screen. ( P.7-26)
You can also check the separation position of line separation on the preview.
• For CF3 (M-Head), you can check the following settings on the preview.
Cutting start position:
Adjust on [Cut Start Position Setting] ( P.6-4), [Optimize Cutting Start Position]
or [Adjust start / end] of Plot Out screen. ( P.7-26)
Offset direction:
Adjust on [Options] of Plot Out screen. ( P.7-26)
Position of cutting line / Cutting direction:
Adjust on [End Mill Diameter] of Output Condition Setup screen. ( P.7-8)

5-23
Checking the Cutting Process by Preview

7
Check the preview again, and click
[Close].

8
Click [Plot] to start cutting.

5-24
CHAPTER 6
Advanced operations-others

This section describes other convenient usage.

Editting the Line....................................................... 6-2

Setting Cutting Start Position................................... 6-4
Specifying the Cut Direction .................................... 6-6
Registering Favorite ................................................ 6-8
Cutting with CF3 Series (M-Head)......................... 6-11
Editting the Line
The outline created by Outline Extraction ( P.4-10) can be modified or changed.

1
Open an image created by Outline
Extraction on CorelDRAW.
• If necessary, enlarge the line to be edited with
the zoom tool of CorelDRAW.

2
Click [ShowEditLineTool] button in
the FineCut Command Bars.

3 Ungroup the object.

• Click [Arrange] -[Ungroup].

4
Select [Shape Tool].

6-2
Editting the Line

5
Select a node or segment of the
object and adjust it.

• The tools that can be edited for the selected node or segment are shown as
active in the [EditLineTool] bar.

Advanced operations - others

6-3
Setting Cutting Start Position
• This function is effective for cutting with CF series (CF/DC/CF2/CF3 (except M-Head)).

The start position of cutting an object can be specified.

By specifying the start position of cutting according to the object, the object can be cut finely.

1
Convert a target object into a simple
path.
• Convert into a simple path by using a function
such as [ConvertToCurves], [Ungroup], or
[UngroupAll] of CorelDRAW.
• Perform [Create Outlines] if using characters.

2
Click [Cut Start Position Setting]
button in the FineCut Command
Bars.

3
Click [Start].

Marks of the

4
Specify the cutting start position. available positions

• The current cutting start position is displayed in

red.
Click a target node from the available positions
(square mark) while holding down the Shift key.
The set node turns red.

• The set cutting start position is saved as a data of CorelDRAW.

• Specify a corner of an object as a
cutting start position. If setting the Do not
cutting start position in the middle of Specify
specify
corners.
the curve, the cutting line may not be curves.
finished well.

6-4
Setting Cutting Start Position

5
Click [End].

6 Click [Plot] button in the FineCut

Command Bars.

7
Click (Plot button).

8
(For CF/CF2/DC/CF3 series)

Advanced operations - others

Uncheck [Optimize Cutting Start
Position] and click [Plot] .
• If [Optimize Cutting Start Position] is checked,
the cutting start position set before becomes
invalid.

• If [Optimize Cutting Start Position] is checked, the cutting start position set before
becomes invalid. (The following message appears when clicking “!”.)

Click

If the box above is checked,

this mark appears.

• (For CF3 Series (M-Head) only)

If [Adjust start / end] is checked on the screen above, the object is cut from 2 mm
6
away from the object. (If the outside is not used, use this function to cut the start /
end position finely.

Cut from 2 mm away from the object.

6-5
Specifying the Cut Direction
• This function is enabled if cutting with a CF Series (CF/DC/CF2/CF3 (except for M-Head)) or CFL-
605RT.
You can specify the cut direction of the object.
Specifying the optimum cut direction according to the object shape enables you to perform better quality cutting.

1
Convert a target object into a simple path.
• Convert into a simple path by using a function such as [ConvertToCurves], [Ungroup], or
[UngroupAll] of CorelDRAW.
• Perform [Create Outlines] if using characters.

2
From the Corel Draw tool palette,
click the [Specify Cutting Direc-
tion] button.

3
Click [Start].
• The paths available for specifying cutting
direction in Corel Draw are indicated by
arrows showing the cut direction.
Red arrow : Closed pass
Cut in clockwise direction
Black arrow : Open pass

• The displayed color is the same color as “Pre-

view” ( P.5-22). The cut direction display
color also changes if you change the cut
preview color.

4
Click, while holding down the Shift Click on a closed path
(circular) to change the
key, the path of cut direction you arrow color and direction.
want to change.
• The cut direction and arrow color of the
clicked path change.
• The cut direction changes each time
you click on the path while holding
down the Shift key.
• Cut direction is stored as Corel Draw
data.
• Save the data after specifying the cut
direction so that cutting can be per-
formed in the same direction the next
time you use the saved data

6-6
Specifying the Cut Direction

5
Click [End].

6
Click [Plot] button in the FineCut
menu.

7
Click (Plot button).

Advanced operations - others

8
Click [Plot].
• Start cutting in the specified cut direction.
• Click the [Preview...] button to display the
dialog box. Check the cut direction

Turn both [Optimize Cutting Start Position] and [Optimize Cutting Direction] of
the [Plot Out] screen to “OFF” if you want to cut in the specified cut direction.
• Turning [Optimize Cutting Start Position] to “ON” might result in not cutting in the
specified cut direction if cutting an open path shape.

6
• Turning [Optimize Cutting Direction] to “ON” might result in not cutting in the specified
cut direction if cutting a closed path shape.

6-7
Registering Favorite
You can register “Favorite” by setting the output conditions on the color and layer tabs displayed on the plot
screen.
You can set the three output conditions indicated in the table below and you can register the following four types
of favorites.
• Specify The Tool On Each Color (set by using the color tab)
• Specify The Plot Condition On Each Color (set by using the color tab)
• Specify The Tool On Each Layer (set by using the layer tab)
• Specify The Plot Condition On Each Layer (set by using the layer tab)

Output conditions that can be set:

Specify The
You can specify the tool used.
Tool
Specify The You can specify the set condition name by using the [Output Condition Setup] dialog
Plot Condition box.
The Cut Order You can specify the cut order of the color or layer displayed by the Color tab/ Layer tab.

• You can register a “Favorite” with a CF Series (CF/DC/CF2/CF3 (except for M-Head)) or CFL-
605RT.
• Contents are overwritten if you register a “Register As Favorite” for an already registered “Color/
Layer”.
• Contents set by “Favorite” are disabled if you select “PANEL” for the output conditions setting on a
connected plotter.

Registering output conditions for “Favorite”

Display the color tab or layer tab, then specify the output conditions in “Color” or “Layer”.
The following procedures indicate how to specify the output conditions by color when the color tab is displayed.

1
Display the plot screen.

2
Select color-specified output con-
ditions, then click [Specify The
Plot Condition On Each Color].

3
Specify the output conditions.
• Cutting is performed in order from the bottom
of that displayed in the color tab. Move the
color name by using the mouse to change the
cut order.

4 Click .

6-8
Registering Favorite

5 Click [OK].

Registering a tool as a “Favorite”

Display color tab or layer tab, and specify the tool for cutting in “Color” or “Layer”.
The following procedures indicate how to specify tools by color when the A is displayed.

1 Display the plot screen.

Advanced operations - others

2
Select color-specified output con-
ditions, then click [Specify The
Tool On Each Color].

3
Specify the tool.
• Cutting is performed in order from the bottom
of that displayed in the color tab. Move the
color name by using the mouse to change the
cut order.

4 Click .
6

5 Click [OK].

6-9
Registering Favorite

Changing registered contents of a “Favorite”

1
Click color or layer tab, then click
.

• The registered contents of “Favorite” are dis-

played.

2
Change the contents of “Favorite”, then click .

Applying “Favorite” when cutting

Use the [Plotter] dialog to select the registered favorite to apply.

1
Display the plot screen.

2 Click .

3 Select Favorite.
• Select a favorite from the previously regis-
tered favorite that is optimal for the corresponding
cutting data.

4 Click [Plot] .
• Cutting starts according to the setting contents of the selected favorite.

Automatically Apply Favorite

• By setting [Automatically Apply Favorite] under “Other” of the [Plotter/User Setup] dialog, cutting is
performed automatically by applying the [Automatically Apply Favorite] that has previously been
set automatically even if a favorite is not selected during plotting. Refer toP.7-15 for details.

6-10
Cutting with CF3 Series (M-Head)
The way of cutting can be set.

1
Set Z axis origin to a plotter.
For details, refer to the operation manual of the plotter.

2 Click [Plot] button in the FineCut

Command Bars.

3
Click (Plot button).

4
Select [Plot Condition].

Advanced operations - others

Select the plot condition set in FineCut.
Click [Edit...] to add media or to set cutting
condition by each media.
In the cutting condition, set the condition for
using endmill such as work thickness or cutting
depth.
( P.7-5)

• If the plot condition is set on each color / layer ( P.5-14), [Plot Condition] in this
screen is invalid.

6-11
5
Set [Options].
In addition to the cutting condition of the previous
step, set options according to the media and the
object shape to cut finely.

Item Description
( P.7-26 for the setting other than below)
Optimizes the start position of cutting to finish finely.
If unchecked, cutting starts from the position that the data
started to draw or the position specified by [Cut Start Position
Optimize Cutting Start Setting].
Position • After setting, be sure to check the start position of cutting on the
preview.
• With optimizing, the start position might be placed out of the object.
If the cutting line goes over the next object, space among objects on
CorelDRAW.
Cuts out inside of the object to use the outside. If checked, the
part to leave is set and the offset direction is determined.
Furthermore, cutting direction is optimized to finish cutting
surface finely.

Use the Outside

Use inside (Unchecked) Use outside (Checked)

An object is cut from 2 mm away from the object. (If the outside
is not used, use this function to cut start / end position finely.

Cut from 2 mm away from the object.

Adjust start / end

6-12
Cutting with CF3 Series (M-Head)

Item Description
Leaves a part of the cutting line, and cuts it last. It prevents the
work from misaligning and makes the cutting surface fine.
Joint Setting
Small or heavy media tends to misalign while cutting. To cut it
finely, withdraw the head, fix the media with tape, and then cut
the ending point.
Set the number of joint (places to leave).
It places the parts to leave for joint on the cutting line evenly.
Joint
As the places of the parts to leave varies from the joint length,
check it on the preview.
Length Set the media length to leave.
Height Set the media thickness to leave.
Pause Leaves the ending point and withdraws the head temporarily.

Joint Setting
• After setting [Joint Setting], test the cutting.

Advanced operations - others

• If multiple cutting and [Cutting Depth] is set on Output Condition Setup screen
( P.7-5), and when the cutting depth is deeper than [Height] in Plot Out screen,
Joint Setting is invalid.
• If the number of cutting is set to multiple on Output Condition Setup screen, the
jointed part is cut the times controlled by Joint Setting.
• If plural numbers are set on [Joint], you can cut a large shape, deflected media or
the like without misaligning.
• With the deflection of media, some part of the media could be lifted. To cut such a
media finely, put an extra height on [Height].

6
Joint Height Joint Length (The shadow area is the part to leave)

6-13
Cutting with CF3 Series (M-Head)

6
Click [Preview].

7
Check the cutting line. ( P.5-22)
After checking, click [Close].

Advanced operations - others

• The cutting line is offset by half of [End Mill Diameter] set on Output Condition
Setup screen or set from [Edit] of Step 4 ( P.7-5). Checking the cutline on the
preview, adjust the end mill diameter on the Ouput Condition screen.

8 Click [Plot] to start cutting.

6
• When [Pause] is selected on [Joint Setting] of Plot Out screen, cutting stops and
the head is withdrawn.
Put tapes on the media to fix, and press [REMOTE] button of the plotter. Then the
jointed part is cut.

6-14
CHAPTER 7
Description of Functions

This section describes the functions of FineCut.

FineCut Menu ................................... 7-2 [Plot Out] Screen ............................ 7-26

How to display FineCut menu ............ 7-2 [Outline Extraction] Screen............. 7-29
Menu .................................................. 7-2 Trace simply .....................................7-29
[Plotter / User Setup] Screen ............ 7-4 Trace with detail setting ...................7-30
Plotter ................................................. 7-4 [Output to RasterLink] Screen ........ 7-32
Output Condition Setup ...................... 7-5 [About FineCut] Screen .................. 7-35
Communication ................................ 7-12 Setting Cutting Start Position ......... 7-36
Plot Dialog ........................................ 7-13
[Online Information] Screen............ 7-37
Alert Display ..................................... 7-14
Other ................................................ 7-15 Uninstallation of FineCut ................ 7-38
[Plot] Screen ................................... 7-16
FineCut Menu
How to display FineCut menu
Display and select the FineCut menu from the following menus on CorelDRAW.

From [Tools]-[Customization] menu of CorelDRAW

Click [Tools]-[Customization]-[Workspace]-[Customization]-[Command Bars]-[FineCut] to display the screen
below.
Click the button on the screen to start each menu.

From [Tools]-[FineCut]
Click [Tools]-[FineCut] and click each menu.

Button Menu Description

Plot Sets the layout or options of an object to plot. ( P.7-16)

Plot Selected Path Plots only the selected object.

Sets the plotter used, communication condition to the plotter or

Plotter / User Setup
others. ( P.7-4)

7-2
FineCut Menu

Recognize Stroke Recognizes the stroke weight and overlap of the selected object.
Weight and Overlap ( P.4-2)

Frame Extraction Creates a frame for the selected object. ( P.3-3)

Trapping Traps the selected object. ( P.4-3)

Joins corner points of open paths (The path that the start and the
Join Path
end point is not connected). ( P.4-4)

Cut Start Position

Set the start position of cutting. ( P.6-4)
Setting

Register Mark Cre-

Creates register marks. ( P.3-4)
ation

Creates a precut line (weed line) around the object to tear off the
Create Weed Line
sticker with ease. ( P.4-5)

Remove Weed Line Removes the created weed line.

Outline Tools Creates the outline to cut a bitmap image. ( P.4-10)

Description of Functions
Sends the set file to RasterLink when using CJV30/ TPC/CJV300/
Output to RasterLink
CJV150 series. ( P.4-12)

Import Plot File... Imports a saved plot file. ( P.4-8)

Output Plot File... Outputs a created plot file to the plotter. ( P.4-8)

ShowEditLineTool Shows the tools to edit the outline. ( P.6-2)

Show ShadowEdge Shows the tools to create a Shadow / Edge on the object. (
Tool P.4-7)

About FineCut
Displays the Operation Manual and the latest information of Fine-
Cut. ( P.7-35) 7

7-3
[Plotter / User Setup] Screen
Set the model or communication conditions to enable communication between FineCut and the plotter.
Click ([Plotter / User Setup] button) in the FineCut Command Bars.

• If the settings set in this screen differs from the settings on the plotter, objects cannot be out-
put normally. Be sure to set the same values as the plotter settings.

Plotter
Set the plotter connected.
Refer to the operation manual of the plotter for details.

Item Description
Model Select the plotter model connected.
Command Select the command set on the plotter.
Step Size Select the step size set on the plotter.
Approximation Type Select the approximation type when cutting bezier curves of the object.
[Output Condition Setup...] Set media or tools. ( next page)

• If [Approximation Type] has been changed, adjust the cut conditions again.
An excessive pressure by some media could damage the cutter.
• When [CF3 (M-Head)] is selected on [Model], only [Spline] can be selected on
[Approximation Type].

7-4
[Plotter / User Setup] Screen

Output Condition Setup

Common to all models

• When CF3/CJV30/TPC/CJV300/CJV150 series is selected, [Default Setup] is not displayed.

Item Description

Description of Functions
Media Name Displays the created media names (output condition).
Display /change the output condition. Select media from [Media Name] to
Condition display the output condition. Displayed items vary depending on the
selected model. ( next page)
[Add] Add the media name.
Change the media name. Select media from [Media Name], and click
[Edit]
[Edit].
Delete the media name. Select media from [Media Name], and click
[Delete]
[Delete].
[Copy] Copy the media name. Select media from [Media Name], and click [Copy].
[Sort] Sort the media name in ascending order.
Import the saved media name (output condition) files.
[Import]

[Export]
To plot with the same condition in a different environment, click [Import]
and load the saved file.
Save the all media names (output condition) to a file.
7
When output condition is set by color/layer ( P.5-14), set output
Default Setup conditions (Tool / Speed / Press / Offset) for frame or mark that cannot be
set by color/ layer.

7-5
When CG/CJV30/TPC/CJV300/CJV150 series is selected
• When setting output condition for each color/layer, default setting (for CG series) or the plotter
setting (for CJV30/TPC/CJV300/CJV150 series) is valid for unchecked items on the screen
below.
• For the details of each item, refer to the operation manual of the plotter.

Item Description Default

Displays the number of cutting. --
Times
(CG/CJV30/TPC/CJV300/CJV150 series always displays “1”.)
Select the tool to be used. CT1
Tool
(CJV30 / TPC series does not have CT4 / CT5 / PIN.)
Speed Set cutting speed per second. 30
Press Set cutting pressure. 100
Set the length from the center of the cutter holder to the blade edge. 0.3
Offset
(It differs depending on the blade type set on the plotter.)

7-6
[Plotter / User Setup] Screen

When CF/CF2/DC/CF3 (except M-Head) is selected

• When setting output condition for each color/layer, default setting (for CF/CF2/DC series) or
the plotter setting (for CF3 series (except M-Head)) is valid for unchecked items on the
screen below.
• For the details of each item, refer to the operation manual of the plotter.

Check [separation cutting direction]

and [separation position] changing
from the [separation origin].
(Displays only when [Line Separa-
tion] is selected.)

Item Description Default

Display or set the number of cutting.
To cut hard or thick media, set cutting times/speed/pressure

Description of Functions
Times multiple times for a single cut line. 1
Click to increase the number of cutting. Set the output condi-
tion for each cutting. Click to decrease the number of cutting.
Select the tool to be used. Select the tool number or the
tool name set on the plotter.
Tool 1
If set the tool number in the output conditions,
check the settings of the tool of plotter side.

Speed Set cutting speed per second. 30

Press Set the pressure to cut. 100
Offset Set the length from the center of cutter holder to the blade edge. 0.3
Arc Theta Correct Adjust the misalignment of origin /end point of the cutting arc. unchecked
Line Separation Check this when cutting with lines separated. unchecked
separation cutting
direction
Select cutting direction of the separated line.

Set the minimum length of the line to be separated.

Ends To
Inner 7
minimum line length 30
Line Sepa- Click [?] to display descriptions of this item.
ration Set the minimum angle of the line to be separated.
( P.4-20) minimum line angle Click [?] to display descriptions of this item. 30

From end
separation origin Set the origin position of the line to be separated.
point
Specify the separating position with the distance from
separation position 10
[separation origin].
Move to previous / next page. It displays when the number
--
of cutting is more than 4 times.

7-7
When CF3 series (M-Head) is selected
• For unchecked items, default setting is valid.
• For the details of each item, refer to the operation manual of the plotter.

Shows the items of

output condition
below

Item Description Default

Display or set the number of cutting.
To cut hard or thick media, set cutting times/speed/pres-
sure multiple times for a single cut line.
Times 1
Click to increase the number of cutting. Set the output
condition for each cutting. Click to decrease the number
of cutting.
Tool Displays [MILLING]. --
Set the thickness of work (media) (50mm maximum). You
a Work Thickness can set only on the first column of the cutting condition set- 3
ting field.
Select cutting direction. Changing cutting direction, the
finish of the cut face may improve. Cut for test with the
target media first, and check the finish.

• Up-Cut
Cuts the left side of the end mill direction as a work.
• Down-Cut
Cuts the right side of the end mill direction as a work.
Cutting Direction Upcut
End mill direction

End mill

Up-Cut Down-Cut

Set the speed of the end mill to move in the direction of

Speed 3
travel.

7-8
[Plotter / User Setup] Screen

Item Description Default

Set the spin times of end mill. Set the number to time
b Rpm 30x1000
1000rpm, the base number.
Set the origin position of Z axis (Length from the surface of
c Cutting Depth 3
the work to the edge of the end mill).
d Z-Speed Set the speed of the end mill to go into the work. 10
Set the end mill diameter. Offset value is set half of the set
value on this screen.
e End Mill Diameter 3
If offset is not necessary, uncheck the box of the first
column of the cutting condition setting field.
Move to previous / next page. It displays when the number
--
of cutting is more than 4 times.

Description of Functions

7-9
When CFL-605RT is selected
• For unchecked items, default setting is valid.
• For the details of each item, refer to the operation manual of the plotter.

Item Description Default

Times Display or set the number of cutting. 1
To cut hard or thick media, set cutting times/speed/pres-
sure multiple times for a single cut line.
Click to increase the number of cutting. Set the output condi-
tion for each cutting. Click to decrease the number of cutting.
Tool Select the tool number or name of the tool to be use. 1
• If set the tool number in the output conditions,
check the settings of the tool of plotter side.
• Check the pen number allocation of plotter
side, and set of FineCut.
• If use the tool of B unit in the CFL-605RT, ruling roller,
reciprocating cutter, tangential cutter can not be used at
the same time. In the case of "cut with reciprocating
cutter after ruling" or so, output the cut data for each tool.
Speed Set cutting speed per second. 30
Press Set the pressure to cut. 100
Offset Set the length from the center of cutter holder to the blade edge. 0.3
Arc Theta Correct Adjust the misalignment of origin /end point of the cutting arc. unchecked
Line Sepa- Line Separation Check this when cutting with lines separated. unchecked
ration Separation Cutting Ends To
Select cutting direction of the separated line. Inner
( P.4-20) Direction
Minimum Line Length
Set the minimum length of the line to be separated. 30
Click to display descriptions of this item.
Minimum Line Angle Set the minimum angle of the line to be separated. 30
Click to display descriptions of this item.
Separation Origin Set the origin position of the line to be separated. From
End Point
Separation Position Specify the separating position with the distance from 10
[Separation Origin].
Move to previous / next page. It displays when the number --
of cutting is more than 4 times.

7-10
[Plotter / User Setup] Screen

Offset
When CF3 (M-Head) is selected and [End Mill Diameter] is set , the object is offset and cut as follows
depending on the object on CorelDRAW and the setting of FineCut.

• If paths are crossed, periphery is offset.

• The path in the crossed path is not cut. (Except CorelDRAW X3)

• If offset objects are touched each other, the objects are united.

• If copy function is used, set [Copy Margin] wide (more than 10mm), not to go one object over the next
object.

Description of Functions
• If one part goes over the other part when offsetting inward, the part over the other part is not cut.

• An open path is not offset.

7
• If output condition is set on each color /layer, each color /layer is offset.

7-11
Communication
Set communication conditions for the plotter connected.

Item Description Default

Select a port connected to the plotter.
When using CG-FX/CG-FXII/CG-75ML/CG-60SR/CG-SRII/CG-SRIII/
CJV30/TPC/CJV300/CJV150/CFL-605RT/CF3 series, you can select
USB connection.
Connect the computer to the plotter and turn the power ON.
Then select [USB] on this screen, and select the name of connected
device.
When using CFL-605RT/CG-SR III series, you can connect via LAN cable.
Plotter communica-
Connect the PC and the plotter with the network via LAN cable. Turn ON --
tion port
the power supply of the plotter.
If you cannot find the machine you want to connect in the list, turn the "IP
address" check box on, and enter the machine's IP address.
Then, select [LAN] on this screen to select the connected machine.
The connected machine is displayed in the [Machine name/ serial No.]
format.
If multiple machines are connected, you can identify them by the serial No.
You can check the serial No. in [INFORMATION] of the plotter.
(When [Serial] is selected on [Port])
Baud Rate 9600
Select the transfer rate.
(When [Serial] is selected on [Port])
Data Length 8
Select the number of data bits.
(When [Serial] is selected on [Port])
Parity None
Select the parity check method.
(When [Serial] is selected on [Port])
Handshake Hardwire
Select the handshake method.
[Connection test...] Test the connection to the plotter. --

• Note on Serial connection

ConnectionWhen connecting serially with CG-SR III series, set [Baud Rate] at [38400bps].
If communicating by using speed other than [38400bps], cutting quality may be decreased.
• Note on LAN connection
(1) If the network address set in the machine differs from the IP address assigned to the PC,
communication cannot be performed.
(2) Even if you select LAN in the plotter communication port, if the connected machine is not displayed,
recheck the firewall setting such as the router on the network and the security software of the PC.

7-12
[Plotter / User Setup] Screen

Plot Dialog
Set the display of Plot screen and Output to RasterLink screen.

Item Description Default

When the sheet is not loaded properly, or [Loading Sheet When Dialog
1300mm x
Default Sheet Size Displays] is unchecked, the preview screen is displayed with the size set
2000mm
here.
Fit In
Display Type Select the display type of Plot screen or [Output to RasterLink] screen. Sheet
Width

Description of Functions

7-13
Alert Display
Select the state to display warnings from the following options.

Item Description Default

The path is not closed.
Open Path checked
(The start and the end points are not set to the same point.)
Stroke Weight
There is a path that the stroke weight is specified. checked
Specified
Other Path That The object may be drawn with the Mesh Fill tool of CorelDRAW.
checked
Cannot Be Plot The object is a raster image.
Register Mark Two-points are corrected at the time of register mark recognition. (CG-EX
checked
Recognition only)
Output Condition
Setup on each The output conditions are set on each color or layer. checked
color/layer

7-14
[Plotter / User Setup] Screen

Other
Select whether or not to display “Online information” when CorelDRAW is started.

Item Description Default

Check the FineCut FineCut information is obtained when using FineCut first on CorelDRAW,
information when and if there is a new / unchecked information, the online information is dis- checked
FineCut first started played.
Automatically Apply You can automatically apply a “Favorite” registered by color or layer when unchecked
Favorite cutting.
For automatic application, set [Automatically Apply Favorite] to “ON” and
select the favorite to apply.

Description of Functions
• Contents selected by favorite are disabled if you select
“PANEL” for the output conditions setting on a connected plot-
ter.
• Perform the following to cut if there is a color or layer in the cut
data that has not been registered in as a favorite.
Tool used : No. 1 is used.
Output conditions setting : The condition at the top of the list
of the [Media Name:] field of the
output conditions settings dialog
box ( P.7-5) is applied.

Do Not Output If Not You can set when [Automatically Apply Favorite] is set to “ON”. unchecked
Registered To Favor- Cutting is not performed for an unregistered color or layer if there is no
ites color or layer set as a favorite in the cut data.

7-15
[Plot] Screen
Set for plotting.
To display this screen, click ([Plot] button) in the FineCut Command Bars.

6 7
1

3 8

9 10 11

4 5

1 Screen Display Mode

Click the tab to switch the display mode.

Item Description
Preview Displays an object with colors.
Displays an object with paths (outline).
Cut Line
It is effective to confirm a white object or a cutting-line.

2 Tool Box
Move or enlarge/reduce the object.

Button Item Description

Move a whole object displayed.
Select Tool
Or move the division line of tiling.
Select and move the part of an object.
Direct Select Tool Moving the object to a blank position of the sheet, you can use the
sheet without waste. ( P.5-17)
Move Preview Area
Change the object display area.
Tool
Enlarge or reduce the layout area.
Zoom Tool Click on the cutting area (white area) to enlarge the view. To reduce
the view, click on the layout area as pressing down the [Alt] key.

7-16
[Plot] Screen

3 Layout Area
The white area is the effective cutting area loaded from the sheet.
It displays the sheet width along the horizontal axis and the sheet length along the vertical axis.
When the object is larger than the cutting area, mark appears to the left of Plot button. Click
mark to display the contents of the error.

4 Communication setting
Displays the communication setting. ( P.7-12)

5 Zoom Size
Change the zoom size displayed on the layout area.

Button Item Description

Fit In Sheet Size Displays the entire sheet.

Fit In Sheet Width Enlarges the sheet width to full screen.

Fit In Objects Size Enlarges the entire object to full screen.

Change the display size by selecting or entering number.

Description of Functions
%
(0.2 to 6400 %)

zoom out / zoom in Zooms in and out the preview.

6 Plotter Name
Displays the plotter name being selected and its cutting direction.

7-17
7 Execution Button

Button Item Description

Initialize Initializes the layout of the changed object.

Loads the sheet size set on the plotter.

Sheet Loading When mark appears on the left of this button, the sheet size of
the plotter cannot be loaded.
Set the plotter to the REMOTE mode and click this button.
Displays Plot Out screen. ( P.7-26)

Plot When mark appears on the left of this button, the object
is larger than the cutting area. Move the object or change the size of
the object to fit into the cutting area.

End Closes the Plot screen.

7-18
[Plot] Screen

8 Size input area

Total Length

Item Description Default

Click (Sheet Loading button) to display the loaded sheet size (width
Sheet Size --
and length).
Alternatively, enter the sheet size (width and length of the cutting area).

• When [CF3 (M-Head)] is selected on [Model] in Plotter/User Setup screen ( P.7-4), Fine-
Cut reduces the width and length to cut 5 mm smaller than the cutting origin of the plotter,
considering the end mill diameter of the milling. Therefore, the width and length displayed on
[Sheet Size] are 10 mm smaller than the plotter setting.

Effective area of the plotter

Sheet area of FineCut

Description of Functions
Origin of FineCut

Cutting origin of the plotter

End mill track

7-19
Item Description Default
Sets the origin position.
The origin is set at the bottom right corner (CG/CJV30/TPC/CJV300/
CJV150/CF3 series) or the bottom left corner (CF/CF2/DC series) of the
layout area. The default origin is at 0 mm (both vertically and horizontally)
of the layout area.
CG/CJV30/TPC/CJV300/
CF/CF2/DC series
Offset CJV150/CF3 series 0

Sets the vertical and horizontal lengths of an object.

When the “ - “ mark is shown between [vertical] and [horizontal] length
Size column, the aspect ratio is retained after changing either length. --
To change the vertical and horizontal lengths separately, check the
[Unlock Scale] on the [Layout] screen below.
Sets the magnification of the vertical and horizontal lengths.
When the “ - “ mark is shown between [vertical] and [horizontal] column,
Scale ( P.5-2) the aspect ratio is retained after changing either value. --
To change the vertical and horizontal magnification separately, check the
[Unlock Scale].
Copy ( P.5-4) Enter the number of copies along the vertical and horizontal directions. 1
Copy Margin Set the margin between objects along the vertical and horizontal direc-
0
( P.5-4) tions.
Makes and cuts a frame around the target object. In addition, set the dis-
Frame tance between the object and the frame. It enables to peel an unneces- unchecked
sary part of the sticker easily.
Displays the width and the height of an object.
When multiple numbers are entered on [Copy], it displays
Total Length --
with the length of all copies. If margin or frame is set, those lengths are
also included.

7-20
[Plot] Screen

9 Layout

Button Item Description Default

Rotates the object clockwise in unit of 90 degrees.
Turn 0
Degrees (0, 90, 180, 270) are displayed in the arrow mark.

Move Click the desired direction of arrow to move the object. --

Fit Fits the object to the sheet size. --

Resets to the original layout that is changed by (Direct

Original Layout --
Select Tool).
Reverses the right and left of the object image and cuts it.

Mirror unchecked

Description of Functions
Changes the aspect ratio of the object when changing the
Unlock Scale ( P.5-2) unchecked
size.
Fixes the object position on the object created place.
If unlocked, the object is cut on the bottom right or the bottom
Origin Lock ( P.5-8) unchecked
left of the sheet. When cutting specified color or layer only,
you can use sheet without waste.
Unit Set the display unit in this screen. unchecked

7-21
10 Tiling ( P.5-6)

Dividing position

Overlap

Build order

Item Description Default

[Separation] After setting the following items, click this button to separate the blocks. --
All Tiles Divides an object into the same size. --
Dividing position Set the dividing position. --
Detail Size Divides on the desired position. Move the division line using --
(Select Tool).

Overlap Sets the overlapping margin of the divided objects. 10

Show Size Displays each size of divided objects. unchecked
Build Order Select an order to paste the cut objects together.

7-22
[Plot] Screen

Layout of divided tiles

Click [Separation] to display the setting screen as below.

Tile space

Mark

Button Item Description Default

[Cancel] Cancels the division. --
Rotates the object clockwise in unit of 90 degrees. Degrees
Turn 0
(0, 90, 180, 270) are displayed in the arrow mark.
Click the desired direction of arrow to move the divided
Move --

Description of Functions
objects within the sheet.
Marks the divided objects.
Mark checked
Select or input the mark size on the size column.
(Except CF3 (M-Head)) 20mm
Paste the divided objects together on the marks.
Sets the space between divided objects when cutting continu-
Tiles Space 10mm
ously.

7-23
11 Register Mark
CG-EX series

CG-FX/FXII/75ML/60SR/SRII, CJV30/TPC/CJV300/CJV150 series

Continuous cutting

CF2 / DC / CF3 series

Continuous cutting

When the mark is separated

CFL-605RT

Continuous cutting

When the mark is separated

7-24
[Plot] Screen

Item Description Default

[Detect Mark]/[Exit Detection] Corrects the angle and the size of the detected register --
button mark.
Click [Exit Detection] to cancel the detection.
Setting of continuous cutting Select the roll sheet (multi-mode) or the leaf sheet (single Roll Mode
mode), and set the number of continuous cutting. (Multi Mode)
Search Position Select the search position of the register mark. For CG/ First Time
CJV30/CJV300/CJV150 series or TPC, select the first
Continue
detecting position on upper boxes, and select the second
or subsequent detecting position on lower boxes.
ID Certification Mode Check this when cutting with ID certification mode by CG- unchecked
75ML.
Size Adjust When the size of the actual data and the printed media are checked
different due to the media type or printing environment, the
frame can be cut aligning with the printed media.

• When cutting fixed-shape items like paper packs, uncheck [Size

Adjust]. If checked, the size may be misaligned.
Reverse Cut Mode Cuts from the back, not from the printed face. unchecked
(CF2/DC/CF3 series (CF2/DC/CF3 series: P.3-28, CFL-605RT: P.3-
CFL-605RT) 28)
When the mark is separated Select the cut area No. and the search position of the mark --
to cut. ( P.3-26)

Description of Functions
12 Color / Layer
Select [Color] or [Layer] tab to display the information of colors or layers.
When tiling is executed, the tile list is displayed.

• Only the objects that are checked at the check box on the left are cut.
• Objects are cut in order of the list from the bottom to the top.
Drag and move each line to change the cutting order.
• In the color list, click the fill color or stroke color to display each information.
• Click the button on the upper right to specify the output condition.

7
fill color stroke color
Select output condition
Select object to cut

7-25
[Plot Out] Screen
Set for output.
To display this screen, click (Plot button) in the Plot screen.

Plot Condition Buttons

Options

Plot Condition
Select the output condition.
• In the case of specifying output conditions or tools on each color or layer, the conditions
cannot be edited on this screen. Instead, click button on the right of Color / Layer tab in
Plot screen and select [Edit Plot Condition...].

Item Description
Plotter Condition
(except CF3 series (M-Head)) Plots with the output condition set on the plotter.
(Default)
Select Condition Select the plot condition set on FineCut.
Click [Edit] button to add media, or to set cutting conditions by media
types. ( P.7-5)
Custom
Set plot condition on this screen. ( P.7-5)
(except CF3 series (M-Head))

7-26
[Plot Out] Screen

Options
Set options. Settings differ from the selected model. ( P.7-4 "[Plotter / User Setup] Screen")

CG/CJV30/TPC/CJV300/CJV150 series

CF/CF2/DC/CF3 series, CFL-605RT

CF3 series (M-Head)

Description of Functions
Item Description Default
Sort Optimizes cutting order of an object automatically. checked
If unchecked, the object is cut from the bottom of the list of the color / layer
/ Tile.
• CG/CJV30/TPC/CJV300/CJV150 series
Sorts to minimize the extra head movement for efficient cutting.
• CF/CF2/DC/CF3 series
Sorts to minimize the extra head movement, and to cut the inside objects first.
All Optimizes cutting order of all the objects. checked
Each Color/ --

7
Optimizes cutting order by each color / layer / tile.
Layer/Tile
Head Withdrawal Moves the head to the set position after cutting object. checked
After Plot ( P.5-20 "Setting Head Position after Plotting")

• This function cannot be used when [Auto Cut] is checked.

Sheet Feed Before cutting data, feeds the sheet and confirms whether the entire data unchecked
(MGL-IIc for CG can be cut.
series only)
• If plotting fails, an error appears on the plotter. In this case, stop plotting, reset
the sheet, then restart plotting.

7-27
[Plot Out] Screen

Item Description Default

Auto Cut unchecked
(CG-FX/FXII/75ML, When cutting a roll sheet continuously, the sheet is separated
CJV30/TPC/CJV300/ automatically after cutting. ( P.3-16).
CJV150 series only)
Optimize Cutting Optimizes the start position of cutting to finish finely. checked
Start Position If unchecked, cutting starts from the position that the data started to draw,
or the start position set on the setting tool ( P.6-4).
Optimize Cutting All cut directions are counterclockwise when cutting by using closed path checked
Direction data. ( P.6-6)
Use the Outside Cuts out inside of the object to use the outside. If checked, offset direction unchecked
is optimized.
Adjust start / end An object is cut from 2 mm away from the object. (If the outside is not checked
used, use this function to cut start / end position finely.
• When CF3 (M-Head) is used, be sure to check the start position of cutting on the
preview after setting.
• If the cutting line goes over the next object, space among objects on CorelDRAW.
Joint Setting Leaves a part of the cutting line, and cuts it last. It prevents the work from checked
misaligning and makes the cutting surface fine.
Joint Set the number of joint (places to leave). 1
Length Set the length to leave. 3
Height Set the height to leave. 1
Pause Select to withdraw the head and to fix the media with tape. unchecked

Buttons

Item Description
[Plot] Starts plotting as the set conditions.
[Cancel] Cancels plotting.
[Preview] Previews the plotting with the set condition.
Confirm the plotting by preview and adjust the settings.
( P.5-22 "Checking the Cutting Process by Preview" )

• Before starting plotting, be sure to check the cutline on the preview.

[Save as file] Saves the plot data in a plot file.
Select the folder and click [Save].

7-28
[Outline Extraction] Screen
Create outline to cut bitmap images.
To display this screen, click ([Outline Tools] button) in the FineCut Command Bars.

Trace simply

Item Description
Preview Displays the image (monochrome) and the traced image.

Description of Functions
Moves all the object being displayed.

Zooms in and out the preview.

Click on the preview to enlarge the view. To reduce the view, click
on the layout area as pressing down the [Alt] key.

Changes the displaying area of the object.

Zooms in and out the preview.

Trace Area Select Drag the slider to select the tracing area.
Move to [Small] to trace narrower area.
Move to [Large] to trace wider area.

7
[Trace] Click this to check the traced image on the preview.
Image display Select whether the image to be traced is displayed on the preview
or not.
If checked, a trace area set on Trace Area Select is displayed in
grey.
You can confirm the outlines to be extracted or compare the image
and the traced image.
Traced image display Select whether the traced image is displayed on the preview or not.
It becomes active when [Trace] button is clicked.

7-29
Trace with detail setting

Item Description Default

Preview Displays the image (monochrome) and the traced image. --
--
Moves all the object being displayed.

Zooms in and out the preview. --

Click on the preview to enlarge the view. To reduce the
view, click on the layout area as pressing down the [Alt]
key.
--
Changes the displaying area of the object.

Zooms in and out the preview. --

Trace Area Select

Easy Select Select the trace area based on luminance of image. checked
(Range: 2-255)
Approximation Select an approximate color of the color specified on the --
preview screen from the whole image.
Adjacency Select the same color area as connected to the location --
specified on the preview screen.
Entry column/Slider Set the range of the selected trace area. --

• For [Approximation] or [Adjacency], decreasing the slider value

enables to extract more accurate.
[Inversion] Inverses the select area. --
Noise Removal Makes a smooth line, reducing uneven outline. unchecked

7-30
[Outline Extraction] Screen

Item Description Default

Trace Setting (recommended setting)
Beautiful Creates detail outlines. checked
Fast Extracting time is fast but the details of the outline is rough. --
Trace Setting (detail setting)
Line length Specify a length for one line. The shorter the line becomes, 1.7pt
the more elaborate in detail.
Angle Specify an angle for the top shape of line. The angle 50
increases by angle becoming small, and the curvilinear
increases by angle becoming large.
[Trace] Click this to check the traced image on the preview. --
Trace Setting (common to the recommended setting and the detail setting)
unchecked
Extracts only the outline.

Dust Removal Delete the line that is shorter part than the specified 1pt
length. Remove the extra lines created by scanning.
Image display Select whether the image to be traced is displayed on the checked
preview or not.
If checked, trace an area set on Trace Area Select is dis-
played in grey.
You can confirm the outlines to be extracted or compare
the image and the traced image.
Trace line display Displays selected tracing area. checked
Click square on the right to change the display color of the

Description of Functions
tracing area.
Traced image display Select whether the traced image is displayed on the pre- checked
view or not.
Click square on the right to change the display color of the
traced image.

7-31
[Output to RasterLink] Screen
When using CJV30/CJV300/CJV150 series or TPC, set items to output print data and cutting data to
RasterLink.
Click [Output to RasterLink] button in the FineCut menu.

Preview Setting

Display mode

Zoom size display

Preview
Displays image of an object.
Item Description
Display mode
Print Displays a printed image.
Cut Displays a cut image with black line.
Print&Cut Displays a cut image on the printed image by layers with black line.
Zoom size display
Fit In Sheet Size
Displays the entire sheet.

Fit In Sheet Width

Enlarges the sheet width to full screen.

Fit In Objects Size

Displays the enlarged object to fill the screen.

• The display type of this screen can be set on “Plotter / User Setup” screen. ( P.7-13)

7-32
[Output to RasterLink] Screen

Setting

Item Description Default

[Cancel] Cancels the setting. --
[Output] Set EPS and output a data to RasterLink. --
Appears if an image gets out of the sheet by the object --
mark size or the copy setting.
[Select Hot Folder...] Select a hot folder of RasterLink. --
The hot folder name selected before can also be selected
from the list.
If hot folder does not exist, create it on RasterLink.
• Create a hot folder from RasterLink.
Sheet Size Enter an effective sheet size (width and length) set on the --
plotter. Effective size can be checked on RasterLink.
Offset Set an offset (horizontal/ vertical direction) from the origin 0
on the lower right of the sheet.
Size Displays the vertical and horizontal lengths of an object. --
Copy Enter the number of copies of one object along the hori- 1
zontal and vertical directions.
Copy Margin Enter the margin between the copied objects along the 10
horizontal and vertical directions.
Turn Rotates the object anticlockwise in unit of 90 degrees. 0
Degrees (0, 90, 180, 270) are displayed in the arrow mark.
Mirror Reverses the right and left of the object image and cuts it. unchecked

Description of Functions
Unit Set the display unit in this screen. mm
Sheet Feed Feeds the sheet before plotting to check whether the entire checked
data can be plotted.
Auto Cut When cutting a roll sheet continuously, the sheet is sepa- checked
rated automatically after completing the plotting. [Set...]
button becomes effective with this item checked.
On the screen below, set the margin length from maximum
data length (the length from the final line to the cutting
position) and cutting a data at every line. ( P.3-16)

7-33
[Output to RasterLink] Screen

Item Description Default

Pinch Roller Pressure Sets the pinch roller pressure. [Set...] button becomes unchecked
effective with this item checked.
On the screen below, set the pinch roller pressure when
printing or cutting (ends or inner position).

Drying Time Set drying time of media after printing. 0

Layer Select/Set the layer to print or plot. --

Setting by layer
Printer Cutting
icon icon

• Printer icon
Click to put a mark on the printing layer.
• Cutting icon
Click to put a mark on the cutting layer.
• Setting by layer
Click button and select [Specify the Cut Condition on
Each Layer] or [Specify The Tool On Each Layer].
Then, select the cutting condition or tools on the right
column of the layer names.

• When both the print and the cut are marked on the Layer screen shown above, the plotter
prints, and then cuts the object. If the printing layer has a register mark created with the
register mark creation of FineCut, it reads the register mark position after printing, and cuts on
the more accurate position.
• When only cutting is marked on the layer screen, include the register mark in the cutting layer
to cut with the register mark loaded.
• If not setting [Specify the Cut Condition on Each Layer] or [Specify The Tool On Each Layer],
it plots with the setting of the plotter.
• Data is placed with the margin of 0.5mm around.

• When cutting with the register mark loaded, set [1Pt] on [MARK DETECT] of CJV30/CJV300/
CJV150 or TPC as the number of register mark detection.
• When creating the register mark on the register mark creation of FineCut, uncheck [Leave a
rectangle as the cutting line]. If checked, the plotter cuts with a part of the rectangle missed.
( P.3-5)
(Activating [Outer Frame Cut] of Cut Condition screen is recommended.)
• When printing type2 register mark ( ), space between copies for at least the register
mark size. ( P.3-5)
• Create only one set of register mark on CorelDRAW. Creating plural marks causes an error.
• When different settings are made for each layer, RasterLinkPro4 Ver.1.1 or before cuts with
the condition shown on the top of the set layer list.
RasterLinkProVI 1.2 or later will cut with each layer setting.

7-34
[About FineCut] Screen
Displays the operation manual of FineCut and the latest information (online information).
Click ([About FineCut] button) in the FineCut menu.

Item Description
Operation Manual Displays the Operation Manual of FineCut (This manual).
Online Information Displays the latest information or update information of FineCut.
A PC with Internet access is needed.

Description of Functions

7-35
Setting Cutting Start Position
The start position of cutting an object can be specified.
Click ([Cut Start Position Setting] button) in the FineCut Command Bars.

• When CF/CF2/DC/CF3 series is used, uncheck [Optimize Cutting Start Position] on Plot Out
screen. If checked, the cutting start position set below becomes invalid.

Item Description
Current cutting start position Indicates with a red square dot.
Setting cutting start position Click a target node while holding down the Shift key.
The set node turns red.

7-36
[Online Information] Screen
Displays the latest information and update information of FineCut.

• This screen is not displayed when unconnected to Internet.

• To prevent this screen from displaying each time of starting CorelDRAW, set on “Plotter/User
Setup”. ( P.7-4)
• This screen is also displayed by clicking [Online Information] from of FineCut Command
Bars.
• This screen is displayed only in English or Japanese.

List

Item Description
List The list of FineCut information is displayed.
Click to display the information on the bottom column of Outline.
Double-click to display the detailed information on Web browser.

Description of Functions
Check Put a check if the information is checked.
Checked items are not displayed when starting CorelDRAW next
time.
(However, if starting [Online Information] from FineCut Command
Bars, the checked items are also displayed.)
Release Date It is the released date of the information.
Topics It is an outline of the information.
Description Details: The details of the information selected above is displayed.
URL: Click to display the detailed information on Web browser.

7-37
Uninstallation of FineCut
To uninstall FineCut, follow the procedures below.
This section describes with the Windows XP screens.

1
Select [Start] - [Control Panel] - [Add or Remove Programs] ([Add or
Remove Applications] for Windows 2000).
For Windows Vista / Windows 7 / Windows 8 / Windows 8.1, select [Control Panel] - [Pro-
grams] - [Programs and Features].

2
Click [Mimaki FineCut for Corel-
DRAW] and click [Change/Remove]
button.
For Windows Vista / Windows 7 / Windows 8 /
Windows 8.1, click [Uninstall] button.

3
When a message on the right
appears, click [Yes].

4
Click [Finish].
Uninstallation is complete.

7-38
CHAPTER 8
Troubleshooting

This section describes the troubles and the solutions.

Troubleshooting....................................................... 8-2
Communication port error occurs while plotting................. 8-2
Sheet size does not change .............................................. 8-2
A part of contour protrudes ................................................ 8-3
Note for cutting an object with a sharp corner ................... 8-3
Note for trapping ................................................................ 8-4
Error Messages ....................................................... 8-5
CorelDRAW Object List ........................................... 8-6
Troubleshooting
Communication port error occurs while plotting
When using a driver software for the tablet, printer diver, or other peripheral devices using the serial port,
the following error may occur as clicking (Plot button).

In this case, change the setting to use the other port.

Sheet size does not change

When the MGL-IIc commands are used
The sheet size does not change even if shifting the origin on the plotter and click (Sheet Loading
button).
FineCut always displays the sheet size set on the plotter. In this case, the data may be cut overflowed
even if the data fits into the cutting area in the layout area.

When the MGL-Ic commands are used

FineCut displays the effective cutting area. Therefore, even if shifting the origin on the plotter, the data
can be cut normally when the data fits into the cutting area.

8-2
Troubleshooting

A part of contour protrudes

A part of contour created with Frame Extraction of FineCut may protrude.
In this case, double-click the protruded node, and delete the part with the Shape tool of CorelDRAW.
For other node editing functions, refer to the operation manual of CorelDRAW.

Note for cutting an object with a sharp corner

Depending on the offset setting, cutting line may stick out of the media (when offset is large), or may cut
inside of the object (when offset is small). Check the previews before cutting and adjust the cutting line.

A corner of the cutting line like this

could stick out of the media.

Troubleshooting

The cutting line of some objects may protrude as the figure above.
In this case, create an offset on [Frame Extraction], edit cutting data on CorelDRAW, and then cut it by
milling.
To cut the cutting line, uncheck the [End Mill Diameter] on Output Condition Setup screen.

8-3
Troubleshooting

Note for trapping

When cutting trapped objects with plotters, some extra segments may be cut, because extra segments are
left while trapping.
To delete the unwanted segments, follow the procedures below.

Extra segments

1 Select [Shape Tool] on Corel-

DRAW.

2
Click unwanted segments, and
press the [Delete] key.
Delete the unwanted
segments.

Unwanted segments have

been removed.

8-4
Error Messages
If following messages appear, solve the problem depending on the messages.

Message Solution
No response from the plotter. Check
Check the plotter is in REMOTE mode.
whether the plotter is in remote
For serial connection, check the communication setting of Fine-
mode and in the correct
Cut meets the setting of the plotter.
communication.
Cannot send data to the plotter.
Check the cable is connected correctly and not broken. For serial
Check whether the cable is
connection, connect a crossing cable.
connected correctly.
Cannot find the communication port.
Check whether the "Communication" Check “Communication” screen of “Plotter / User Setup” and the
of "Plotter / User Setup" is set up state of the plotter.
correctly.
No valid serial port is found. To use
USB serial conversion adapter, When an USB-serial adapter is used, install the driver referring to
install the driver supplied with the the manual supplied with the adapter.
adapter.
This port may be used by printer If the port for FineCut is assigned to the “Port” of the printer driver
driver. Check the setting of Ports tab on Windows, FineCut cannot use the port. Change the port of the
from Properties of the printer driver. printer driver.
Check the followings.
No USB plotter is recognized. Check
• The USB driver has been installed.
whether the USB cable is correctly
• The power of the plotter is ON.
connected and the plotter is on.
• The USB cable is connected correctly.
Media detection on the output
equipment has not been completed. Occurs when CJV30/CJV300/CJV150 or TPC does not detect
After media detection, execute media. Execute media detection, and then execute again.
again.
Non-Mimaki plotter is connected.
FineCut is able to output to Mimaki Connect Mimaki plotter.
plotter.
Register mark is not found. Create
Create register marks on the register mark creation menu of
register marks using the register
FineCut.
mark creation menu of FineCut.
Register mark data is not correct.
Re-create the register mark using Create register marks on the register mark creation menu of Troubleshooting
the register mark creation menu of FineCut again.
FineCut.
No available paths for FineCut in this
Select an available data.
document.
Fails to configure the internet
Check the Internet connection and the settings of the PC.
connection. Confirm the setting.
This function is not available for the
plotter model selected. This function can be used with the plotter “CJV30”, “CJV300” ,
Check [Model] on [Plotter/User “CJV150” or “TPC”.

8
Setup] screen.
Cannot write into the folder selected.
Click [Select Hot Folder] button and Check the hot folder of RasterLinkPro is correctly selected.
check the folder.
An unexpected error occurred. Contact a distributor in your district to call for service.
No valid path. Check the data.

8-5
CorelDRAW Object List
• Be sure to save the data before executing command of the FineCut.

• Overlapped objects sequence may be changed on the [Plot Out] - [Preview] screen.

• When executing FineCut command for Wrap Paragraph text, indent setting, or character string
combined to an other path, release the Wrap Paragraph text and the character string combined to the
other path.

• If [Plot], [Frame Extraction], or [Create Weed Line] fails, try to execute [Recognize Stroke Weight And
Overlap]. It may solve the problem.

• When FineCut command fails, try the followings.

• Reduce of increase the number of selection paths.
• Draw or erase the outline in the path.
• Remove complicated effects. (Disassemble character strings into path)
1.Select an object to remove the effects.
2.Select [Arrange] - [Break Apart] menu, [Arrange] - [Convert To Curves] menu, or [Arrange]-
[Command starting with Break*1]
(*1 A name is different depending on the running effect type)
3.Repeat step 2.

8-6
CorelDRAW Object List

O: Available
Δ : Partially available
X: Unavailable
- : No function

Function: Plot

Figure CorelDRAW Vesion

X8 X7 X6 X5 X4 X3 12 11
Rectangle O O O O O O O O
Ellipse O O O O O O O O
Curve O O O O O O O O
Polygon O O O O O O O O
Star O O O O O O - -
Complex Star O O O O O O - -
Perfect Shapes O O O O O O O X
Artistic Text O O O O O O O O
Paragraph Text O O O O O O O O
Bitmap X X X X X X X X
Group O O O O O O O O
Combine Δ Δ Δ Δ Δ Δ Δ Δ
Mesh Fill X X X X X X X X
Smart Fill O O O O O O - -
Blend O O O O O O O O
Contour O O O O O O O O
Distortion O O O O O O O O
Drop Shadow X X X X X X X X
Envelope O O O O O O O O
Extrude Δ Δ Δ Δ Δ Δ Δ Δ
Extrude Bevel Δ Δ Δ Δ Δ Δ Δ Δ
Transparency O O O O O O O O
Artistic Media O O O O O O O X
Connector O O O O O O O O
Dimension O O O O O O O O
Troubleshooting
Iens O O O O O O O O
Power Clip O O O O O O O O
Perspective O O O O O O O O
Crop O O O O O O - -
Symbol O O O O O O O X
Smudge Brush O O O O O O O O
Roughen Brush O O O O O O O O

8
Roll Over X X X X X X X X
OLE Object X X X X X X X X
Internet Object X X X X X X X X
OLE Barcode X X X X X X X X
Guideline X X X X X X X X

8-7
Function: Plot Selected Path

Figure CorelDRAW Vesion

X8 X7 X6 X5 X4 X3 12 11
Rectangle O O O O O O O O
Ellipse O O O O O O O O
Curve O O O O O O O O
Polygon O O O O O O O O
Star O O O O O O - -
Complex Star O O O O O O - -
Perfect Shapes O O O O O O O X
Artistic Text O O O O O O O O
Paragraph Text O O O O O O O O
Bitmap X X X X X X X X
Group O O O O O O O O
Combine Δ Δ Δ Δ Δ Δ Δ Δ
Mesh Fill X X X X X X X X
Smart Fill O O O O O O - -
Blend O O O O O O O O
Contour O O O O O O O O
Distortion O O O O O O O O
Drop Shadow X X X X X X X X
Envelope O O O O O O O O
Extrude Δ Δ Δ Δ Δ Δ Δ Δ
Extrude Bevel Δ Δ Δ Δ Δ Δ Δ Δ
Transparency O O O O O O O O
Artistic Media O O O O O O O X
Connector X X X X X X X X
Dimension X X X X X X X X
Iens O O O O O O O O
Power Clip O O O O O O O O
Perspective O O O O O O O O
Crop O O O O O O - -
Symbol O O O O O O O X
Smudge Brush O O O O O O O O
Roughen Brush O O O O O O O O
Roll Over X X X X X X X X
OLE Object X X X X X X X X
Internet Object X X X X X X X X
OLE Barcode X X X X X X X X
Guideline X X X X X X X X

8-8
CorelDRAW Object List

Function: Recognize Stroke Weight And Overlap

Figure CorelDRAW Vesion

X8 X7 X6 X5 X4 X3 12 11
Rectangle O O O O O O O O
Ellipse O O O O O O O O
Curve O O O O O O O O
Polygon O O O O O O O O
Star O O O O O O - -
Complex Star O O O O O O - -
Perfect Shapes O O O O O O O X
Artistic Text O O O O O O O O
Paragraph Text O O O O O O O O
Bitmap X X X X X X X X
Group O O O O O O O O
Combine Δ Δ Δ Δ Δ Δ Δ Δ
Mesh Fill X X X X X X X X
Smart Fill O O O O O O - -
Blend O O O O O O O O
Contour O O O O O O O O
Distortion O O O O O O O O
Drop Shadow X X X X X X X X
Envelope O O O O O O O O
Extrude Δ Δ Δ Δ Δ Δ Δ Δ
Extrude Bevel Δ Δ Δ Δ Δ Δ Δ Δ
Transparency O O O O O O O O
Artistic Media Δ Δ Δ Δ Δ Δ Δ X
Connector Δ Δ Δ Δ Δ Δ Δ Δ
Dimension Δ Δ Δ Δ Δ Δ Δ Δ
Iens O O O O O O O O
Power Clip Δ Δ Δ Δ Δ Δ Δ Δ
Perspective O O O O O O O O
Crop O O O O O O - - Troubleshooting
Symbol O O O O O O O X
Smudge Brush O O O O O O O O
Roughen Brush O O O O O O O O
Roll Over X X X X X X X X
OLE Object X X X X X X X X
Internet Object X X X X X X X X
OLE Barcode X X X X X X X X
Guideline X X X X X X X X

8-9
Function: Frame Extraction

The kind of figure CorelDRAW Vesion

X8 X7 X6 X5 X4 X3 12 11
Rectangle O O O O O O O O
Ellipse O O O O O O O O
Curve O O O O O O O O
Polygon O O O O O O O O
Star O O O O O O - -
Complex Star O O O O O O - -
Perfect Shapes O O O O O O O X
Artistic Text O O O O O O O O
Paragraph Text O O O O O O O O
Bitmap X X X X X X X X
Group O O O O O O O O
Combine O O O O O O O O
Mesh Fill X X X X X X X X
Smart Fill O O O O O O - -
Blend O O O O O O O O
Contour O O O O O O O O
Distortion O O O O O O O O
Drop Shadow X X X X X X X X
Envelope O O O O O O O O
Extrude Δ Δ Δ Δ Δ Δ Δ Δ
Extrude Bevel Δ Δ Δ Δ Δ Δ Δ Δ
Transparency O O O O O O O O
Artistic Media Δ Δ Δ Δ Δ Δ Δ X
Connector Δ Δ Δ Δ Δ Δ Δ Δ
Dimension Δ Δ Δ Δ Δ Δ Δ Δ
Iens O O O O O O O O
Power Clip Δ Δ Δ Δ Δ Δ Δ Δ
Perspective O O O O O O O O
Crop O O O O O O - -
Symbol O O O O O O O X
Smudge Brush O O O O O O O O
Roughen Brush O O O O O O O O
Roll Over X X X X X X X X
OLE Object X X X X X X X X
Internet Object X X X X X X X X
OLE Barcode X X X X X X X X
Guideline X X X X X X X X

8-10
CorelDRAW Object List

Function: Trapping

Figure CorelDRAW Vesion

X8 X7 X6 X5 X4 X3 12 11
Rectangle O O O O O O O O
Ellipse O O O O O O O O
Curve O O O O O O O O
Polygon O O O O O O O O
Star O O O O O O - -
Complex Star O O O O O O - -
Perfect Shapes O O O O O O O X
Artistic Text O O Δ Δ Δ Δ Δ Δ
Paragraph Text O O Δ Δ Δ Δ Δ Δ
Bitmap X X X X X X X X
Group O O O O O O O O
Combine O O O O O O O O
Mesh Fill X X X X X X X X
Smart Fill O O O O O O - -
Blend O O O O O O O O
Contour O O O O O O O O
Distortion O O O O O O O O
Drop Shadow X X X X X X X X
Envelope O O O O O O O O
Extrude Δ Δ Δ Δ Δ Δ Δ Δ
Extrude Bevel Δ Δ Δ Δ Δ Δ Δ Δ
Transparency O O O O O O O O
Artistic Media Δ Δ Δ Δ Δ Δ Δ X
Connector Δ Δ Δ Δ Δ Δ Δ Δ
Dimension Δ Δ Δ Δ Δ Δ Δ Δ
Iens Δ Δ Δ Δ Δ Δ Δ Δ
Power Clip Δ Δ Δ Δ Δ Δ Δ Δ
Perspective O O O O O O O O
Crop O O O O O O - - Troubleshooting
Symbol O O O O O O O X
Smudge Brush O O O O O O O O
Roughen Brush O O O O O O O O
Roll Over X X X X X X X X
OLE Object X X X X X X X X
Internet Object X X X X X X X X
OLE Barcode X X X X X X X X
Guideline X X X X X X X X

8-11
CorelDRAW Object List

Function: Milling Cut

Figure CorelDRAW Vesion

X8 X7 X6 X5 X4 X3 12 11
Rectangle O O O O O O O O
Ellipse O O O O O O O O
Curve O O O O O O O O
Polygon O O O O O O O O
Star O O O O O O - -
Complex Star O O O O O O - -
Perfect Shapes O O O O O O O X
Artistic Text Δ Δ Δ O O O O O
Paragraph Text Δ Δ Δ O O O O O
Bitmap X X X X X X X X
Group O O O O O O O O
Combine O O O O O O O O
Mesh Fill X X X X X X X X
Smart Fill O O O O O O - -
Blend O O O O O O O O
Contour O O O O O O O O
Distortion O O O O O O O O
Drop Shadow X X X X X X X X
Envelope O O O O O O O O
Extrude Δ Δ Δ Δ Δ Δ X X
Extrude Bevel Δ Δ Δ Δ Δ Δ X X
Transparency O O O O O O O O
Artistic Media Δ Δ Δ Δ Δ Δ Δ X
Connector Δ Δ Δ Δ Δ Δ Δ O
Dimension Δ Δ Δ Δ Δ Δ Δ Δ
Iens Δ Δ Δ Δ Δ Δ Δ Δ
Power Clip Δ Δ Δ Δ Δ Δ Δ Δ
Perspective O O O O O O O O
Crop O O O O O O - -
Symbol O O O O O O O X
Smudge Brush O O O O O O O O
Roughen Brush O O O O O O O O
Roll Over X X X X X X X X
OLE Object X X X X X X X X
Internet Object X X X X X X X X
OLE Barcode X X X X X X X X
Guideline X X X X X X X X

Virtualisation Case Study 2425
No ratings yet
Virtualisation Case Study 2425
9 pages
KMC Online Parts Manual Download and Install - en
No ratings yet
KMC Online Parts Manual Download and Install - en
30 pages
Computer Applications in Mining Syllabus
No ratings yet
Computer Applications in Mining Syllabus
2 pages
Software Evolution & Engineering
No ratings yet
Software Evolution & Engineering
12 pages
Mini Project Documentation
No ratings yet
Mini Project Documentation
18 pages
Cisco Umbrella DNS Security Essentials Package
No ratings yet
Cisco Umbrella DNS Security Essentials Package
4 pages
The Tao of Tmux and Terminal Tricks
100% (1)
The Tao of Tmux and Terminal Tricks
90 pages
Chapter 1 1
No ratings yet
Chapter 1 1
45 pages
Oslessonplan24 Deceafter
No ratings yet
Oslessonplan24 Deceafter
25 pages
Introduction To Telegram Video Splitter Bot
No ratings yet
Introduction To Telegram Video Splitter Bot
10 pages
Private Cloud Setup Step by Step Using Apache Cloud Stack
No ratings yet
Private Cloud Setup Step by Step Using Apache Cloud Stack
6 pages
Documentf
No ratings yet
Documentf
1 page
Ursa Major Guidelines
No ratings yet
Ursa Major Guidelines
4 pages
MatrrixComSec SETU VTEP Gateway SetupGuide
100% (1)
MatrrixComSec SETU VTEP Gateway SetupGuide
21 pages
Cablehack - Advanced Surfboard Sb5100 "How To".: Masta
No ratings yet
Cablehack - Advanced Surfboard Sb5100 "How To".: Masta
12 pages
CSC 110: Intro to Computers Course
No ratings yet
CSC 110: Intro to Computers Course
4 pages
Add
No ratings yet
Add
3 pages
Full Profect Report
No ratings yet
Full Profect Report
39 pages
Best Cloud Computing Services
No ratings yet
Best Cloud Computing Services
4 pages
VCloud VApp Creation & RPM/YUM Guide
No ratings yet
VCloud VApp Creation & RPM/YUM Guide
2 pages
pfSense Transparent Firewall Guide
No ratings yet
pfSense Transparent Firewall Guide
4 pages
TESTAR - Scriptless Testing Through Graphical User Interface
No ratings yet
TESTAR - Scriptless Testing Through Graphical User Interface
46 pages
HP Aruba Certified Network Security Professional - HPE7-A02 Free Exam Questions (2024) - 6
No ratings yet
HP Aruba Certified Network Security Professional - HPE7-A02 Free Exam Questions (2024) - 6
4 pages
ASA - Packet Capture Using ASDM
No ratings yet
ASA - Packet Capture Using ASDM
11 pages
Hooks in Odoo OWL Framework
No ratings yet
Hooks in Odoo OWL Framework
9 pages
Visio 2007
100% (1)
Visio 2007
19 pages
Locators in Selenium IDE
No ratings yet
Locators in Selenium IDE
20 pages
Online Crime Reporting System
No ratings yet
Online Crime Reporting System
14 pages
AKTU Thesis Preparation Manual
No ratings yet
AKTU Thesis Preparation Manual
11 pages
Creating Maps
No ratings yet
Creating Maps
9 pages