12V 7A
7 - Stage Automatic Smart Battery Charger For Motorcycle, Car, ATV,
etc...
(AGM, GEL, SLA, WET, DEEP CYCLE... BATTERI ES)
FBC1207D
USER MANUAL
THI S MANUAL CONTAI NS I MPORTANT SAFETY AND OPERATI NG
I NSTRUCTI ONS
English
Please read this manual and follow the instructions carefully before using.
WARNI NG:
• The FBC1207D charger is designed for 12V batteries with capacity
from 6AH - 120AH.
• Check battery manufacturer specifications before using.
• Explosive gases may emitting from battery during charging.
Provide ventilation to prevent flames and sparks.
• Do not expose charger to the sun, or under high temperature
environment.
• Battery acid is corrosive. Rinse immediately with water if acid
comes into contact with skin or eyes.
• Do not charge a frozen or damaged battery.
• Do not charge non-rechargeable batteries.
• Do not place the charger on the battery while charging.
• Be extra cautious to reduce risk of dropping a metal tool onto
battery. I t might spark or short-circuit battery or other electrical
part that may cause explosion.
• When working with a lead-acid battery, remove personal metal
items such as rings, bracelets, necklaces, watch...
• Do not smoke or allow a spark or flame while charging.
• I n order to reduce risk of electric shock, unplug charger from AC
outlet before doing any maintenance or cleaning.
• Not for use by children or by anyone who is unable to follow
instructions of this manual, unless they are supervised by an adult
to ensure the proper use of charger.
MAI N FEATURES:
• High efficiency (> 85% ).
• GEL, Standard, AGM, MOTO battery type can selectable
• The 7-stage microprocessor-controlled charging process provides
the best possible application and enables efficient battery
charging.
• Charging voltage adapts to temperature, that can prevent over- or
under- charging of battery.
• Capable of recharging severely discharged or heavily sulfated
battery.
• Reverse polarity protection, short circuit protection, over-charge
protections, parks free contact.
• LCD display: voltage, current, temperature etc.
• Ease of use. Clear charging status display.
• Full microprocessor controlled.
• Do not over-charge your battery even it is kept connecting in any
mode.
LCD DI SPLAY:
Charger I nside Temperature
Charge Voltage
Charge Current
Repair Mode
Standby
Battery Full
Desulphation Mode
Only for Gel, Standard, AGM mode
Test Mode
An automatic battery test is conducted immediately after the
absorption stage, it monitors the voltage for 10 minutes to
determine if the battery is full or not
Low Voltage
Battery voltage is too low or battery can’t store the energy
End of Repair Function
Winter Mode
When the temperature is below + 10’ C, Raise the charge
voltage
Only for Standard mode
Summer Mode
When the temperature is above + 28’ C, Reduce the charge
voltage
Only for Standard mode
Wrong polarity, please change the connection of the clamps
Defect battery, please let the battery be checked by a
mechanic and if necessary, change the battery
Bad connection, please check the connection between the
charger and the battery
Battery Capacity
1- stage: Battery desulphation
2- stage: Soft start charging
3- stage: Bulk charging
4- stage: Absorption charging
5- stage: Battery test
6- stage: Recondition charging
7- stage: Float & maintenance charging
CHARGER MODES:
GEL Batteries Mode
GEL
For charging GEL Batteries
STANDA Standard Batteries Mode
RD For SLA, WET, DEEP CYCLE, EFB, Calcium Batteries
AGM Standard Batteries Mode For charging AGM batteries
Motorcycle Batteries Mode For charging motorcycle
MOTO
batteries
Repair Mode (16 hours)
An advanced battery recovery mode for repairing and
REPAI R storing, old, idle, damaged, stratified or sulfated.
Not all batteries can be recovered, only can use on
Motorcycle and Car batteries
Charge Mode Select Button
After charging for 30 seconds, the mode button will be
MODE
locked. I f you want to use it again, need to remove the
alligator clip from the battery
CONNECT TO THE BATTERY:
Do not connect the AC power plug until all other connections are made.
I dentify the correct polarity of the battery terminals on the battery. Do
not make any connections to the carburetor, fuel lines, or thin, sheet
metal parts. The below instructions are for a negative ground system
(most common). I f your vehicle is a positive ground system (very
uncommon), follow the below instructions in reverse order.
1. Connect the positive (red) clamp to the positive (POS, P, + ) battery
terminal.
2. Connect the negative (black) clamp to the negative (NEG, N, -)
battery terminal.
3. Connect the battery charger into a suitable electrical outlet. Do not
face the battery when making this connection.
4. When disconnecting, disconnect in the reverse sequence,
removing the negative first (or positive first for positive ground
systems).
BEGI N CHARGI NG:
1. Verify the voltage and chemistry of the battery.
2. Confirm that you have connected the battery clamps or eyelet
terminal connectors properly and the AC power plug is plugged
into an electrical outlet.
3. Press the mode button to toggle to the appropriate charge mode.
4. The mode LED will illuminate the selected charge mode and the
Charge I con will illuminate (depending on the health of the battery)
indicating the charging process has started.
5. The charger can now be left connected to the battery at all times
to provide maintenance charging.
Auto-Memory: The charger has built in auto-memory and will return to
the last charge mode when connected.
TECHNI CAL SPECI FI CATI ONS:
Model FBC1207D
Type Smart & Automatic
AC I nput 100 - 240V 50/ 60HZ
Output Voltage 12V
Output Current 7A max.
Minimum Start Volt Battery Voltage > 7.0V
I nput Power With Load Max. 105W
I nput Power under No Load 2.6W
Cooling Fan
Size (L* W* H) 150* 86* 63mm
Net Weight 415g
Approval CE / FCC
Battery Charger
Model FBC1207D
I nput 100-240V-50/ 60HZ, max. 105W
Output DC 12V max.7A
Manufacturer Foxsur Electronic Equipment Co., Ltd.
Address Hengjiangxia I ndustrial Zone, ChangPin Tower, DongGuan
City, GuangDong Province, China
BellaCocool GmbH
PettenkoferstraBe 18,10247 Berlin, Germany
E-mail: info@bellacocool.de Tel: + 49 30/ 98578681
Made in China
