CHOITHRAM SCHOOL, MANIK BAGH,
INDORE
CBSE CLASS XI 2021-22
Computer Science Practical File (Code :417)
Submitted to: Submitted by:
Ms. Pardeep Kaur Arora Tanay Maheshwari
XI ‘A’
CHOITHRAM SCHOOL MANIK BAGH, INDORE
PRACTICAL FILE (COMPUTER SCIENCE Code : 083)
S.No. Program Output
1. WAP to check whether a character is a capital,
small letter or a number.
choice=input("Enter one Character")
if(choice>="A" and choice<="Z"):
print("Capital Letter has been entered")
elif(choice>="a" and choice<="z"):
print("Small Letter has been entered")
elif(choice>="0" and choice<="9"):
print("A digit has been entered")
else:
print("Special Symbol")
2. WAP to convert cm to meter, gram to kilogram, litre
to millilitre, centigrade to Fahrenheit using a menu
driven user choice
n=int(input("enter your conversion choice: 1.cm to
meter 2.gram to kilogram 3. litre to millilitre 4.
centigrade to Fahrenheit "))
if n==1:
m=int(input("Enter your value in cm "))
meter = m / 100.0
print("Length in meter = " , meter , "m")
elif n==2:
m=int(input("Enter your value in g "))
kilogram = m / 1000.0
print("Mass in kg = " , kilogram , "kg")
elif n==3:
m=int(input("Enter your value in l "))
millilitre = m * 1000
print("Volume in ml = " , millilitre , "ml")
elif n==4:
m=int(input("Enter your value in c° "))
fahrenheit = (m * 1.8)+32
print("Temperature in c° = " , fahrenheit , "c°")
else:
print("invalid value")
3. WAP to make calculator by character selection of
operators i.e +,×,÷,-
val1 = float(input("Enter value 1: "))
val2 = float(input("Enter value 2: "))
op = input("Enter operator (+,-,*,/): ")
if op == "+":
result = val1 + val2
print("The result is ",result)
elif op == "-":
if val1 > val2:
result = val1 - val2
print("The result is ",result)
else:
result = val2 - val1
print("The result is ",result)
elif op == "*":
result = val1 * val2
print("The result is ",result)
elif op == "/":
if val2 == 0:
print("Error! Division by zero is not allowed.
Program terminated")
else:
result = val1/val2
print("The result is ",result)
else:
print("Wrong input, program terminated")
4. WAP to print the sum of cubes of numbers from 1
to n (where n is user entered).
n = int(input('Enter upper limit'))
s=0
for i in range (1,n+1):
s=s+(i*i*i)
print ('Sum of cubes is =',s)
5. WAP to print even numbers from 1 to n using While
loop (where n is user entered).
i=0
n=int(input("Enter the ending limit "))
s=0
while i<n-1:
i=i+2
s=s+i
print("the sum of even numbers",n,"=",s)
6. WAP to print numbers in reverse order from (n) to 1
(where n is user entered)
n=int(input("Enter the ending value of the series "))
while n>=1:
print(n)
n=n-1
7. WAP to print the 11 + 22 + 33 + 44 + 55 .
s=0
i=1
while i<=5 :
answer=1
j=1
while j<=i :
answer=answer*i
j=j+1
s=s+answer
i=i+1
print("the sum of the series is:",s)
8. WAP to print the sum of series 1/1 + 1/2 + 1/3 + 1/4
……. 1/n.
n=int(input("Enter the number"))
s=0
for i in range(1,n+1):
s=s+1/i
print(s)
9. WAP to print the pattern: A
AB
ABC
ABCD
ABCDE
i=65
while i<70:
j=65
while j<=i:
print(chr(j),end=" ")
j=j+1
print("\n")
i=i+1
10. WAP to print sum of even numbers and odd
numbers individually from 1 to 50 using the While
loop.
se=0
so=0
i=0
while i<=50:
if i%2==0:
se=se+ i
else :
so=so+ i
i=i+1
print ('Sum of odd numbers is :',so)
print ('Sum of even numbers is :',se)
11. WAP to add two numbers and print sum till the
user enters ‘n’ as response using break statement.
res='yes'
while res=='yes':
a=int(input('Enter first number'))
b=int(input('Enter second number'))
print(a+b)
res=input('Do you want to continue')
if res=='no':
break
else:
continue
12. WAP to display the first 10 Mersenne numbers
using a while loop.
print("First 10 mersenne numbers: ")
i=1
while i<=10:
mersen=2**i-1
print(mersen)
i=i+1
13. WAP to check whether the number entered is an
ARMSTRONG number or not.
n= int(input("Enter a 3 digit number: "))
s=0
temp=n
while temp>0:
digit=temp%10
s=s+(digit**3)
temp=temp//10
if(n==s):
print(n, "is an armstrong number")
else:
print(n, "is not an armstrong number")
14. WAP to print the factorial of a number entered by
the user using a for loop.
n= int(input("Enter a number: "))
m=1
for i in range (1,n+1):
m=m*i
print (m)
15. WAP to check whether the number entered is a
prime number or not.
count=0
n=int(input("enter number to check"))
if n==1:
print("neither prime nor composite")
if n>1:
for i in range(1,n+1) :
if n%i==0 :
count=count+1
if count==2:
print ("Prime number")
else:
print ("Not a prime number")
- THANK YOU -
