PARAT 4-way-indexing-quick-

change turret-toolpost
turning instead of
measuring
Indexing accuracy 0,005 mm (0,0002“)
Internal and external operations in one setting Quick-clamping
System with 40 Positions in divisions of 9°. Five sizes available
The PARAT 4-Way Turret
The production of precision turned components For external machining, 4 tool stations are availa-
places extremely high demands on the machine ble that enable the exchange of tool holders with
and tooling system, without losing ease of ope- a weight of up to 12.3 kg (without tools). This
ration. reduces to a minimum a procedure that would
The continuous development of conventional and otherwise be both tiring and time consuming for
cycle-controlled lathes has significantly increased the operator.
the range of features. Nevertheless, the impor-
tance of the correct tooling system to make full When outer and inner machining are combined to
use of the gained advantages is often overlooked. turn both precision tolerances in one setting, up
to three clamping points are available.
When different tools are required for internal and Particularly with long drilling rods, the elimination
external precision tolerances, the importance of of the need to change the tool holder is particu-
the flexibility and stability of the tool system used larly advantageous.
becomes quickly clear.
The opening and clamping of the PARAT turret oc-
In such cases, the dimensions of the tools them- curs through a threadless quick clamping nut in
selves as well as the means of handling of heavier conjunction with a quick clamping lever.
tools can quickly cause problems. The different tool holders are individually clamped
through four eccentric elements.
With its four tool stations and indexing accuracy
of 0.005 mm PARAT turret provides the ideal so- We would especially like to draw attention to the
lution. threaded clamping bolt as well the clamping bolt

PARAT 4-Way Indexing Turret Head PARAT 4-Way Indexing Head from underneath

PARAT Clamping bolt with collar and feather key

PARAT Clamping bolt with thread and expanding zone PARAT Quick Clamping Nut

PARAT Operating Tools PARAT Precision Ground Coupling

2
with threads and internal coolant facility. The de-
sign of these clamping bolts makes a significant
contribution to operating safety. A special expan-
sion joint ensures that, in case of a collision, most
of the energy is absorbed and, consequently, there
is no subsequent damage to other machine com-
ponents.
Usually an exchange of the clamping bolt is suf-
ficient to enable machining to be restarted in the
required quality.

To ensure optimum acceptance of a large variety

of different tools, a wide range of tool holders are
available.
Of particular importance here is the partly machi-
ned tool holder. This is a tool holder that is supplied
with a dovetail guide that is already hardened and
ground. The non-machined part of the holder can,
however, be finished according to the specific re-
quirements of the special tool to be held.

We can, of course, also supply on request custom

tool holders with special sizes or designs suitable
for specific technical demands.

As we are sure of the quality of our PARAT turret,

we offer our customer a 5 year – manufacturer’s
warranty for the turret and tool holders (exclu-
ding wear and tear parts).

New – installation service in our factory

Technical data to define suitable size

Technical data mm/inches mm/inches mm/inches mm/inches mm/inches
Size 1 Size 2 Size 3 Size 4 Size 5
Approx. drive power of the lathe kw/hp 6/8 15/20 25/33 45/60 65/87
Approx. torque at the main spindle Nm/lb/ft 150/110 700/516 1500/1106 7000/5162 12000/8850
12/0.4724 25/0.9842 40/1.5748 50/1.9685 50/1.9865
Max. cutting tool cross section A
20/0.7874
30/1.1811
Height of cutting edge B
35/1.3779 40/1.5748 60/2.3622 80/3.1496 90/3.5430
Min. support width C 90 - 100/ 110 - 150/ 150 - 180/ 200 - 250/ 200 - 300/
3.5433 4.3307 5.9055 7.874 7.874
Basic square toolpost D 84/3.3070 106/4.1732 134/5.2755 154/6.0629 204/8.0315
Precision coupling E Ø 80/3.1496 Ø 100/3.9370 Ø 132/5.1968 Ø 150/5.9055 Ø 195/7.6772
Swing diameter with tool holder G Ø 180/7.0866 Ø 240/9.4488 Ø 300/11.811 Ø 350/13.7795 Ø 446/17.5590
Standard clamping bolt J (H7) 20/0.7874 25/0.9842 35/1.3779 35/1.3779 45/1.7716
with collar and feather key K 15/0.5905 18/0.7086 25/0.9842 30/1.1811 35/1.3779
Clamping bolt with thread J M 14 M 16 M 20 M 24 M 30 x 2
Clamping bolt with thread and J M 16 M 20 M 24 M 24 M 30 x 2
internal cooling
Thread length mm K 21/0.8267 25/0.9842 30/1.1811 35/1.3779 35/1.3779
Approx. weight in kg/lbs 3/6.6 6,5/14.3 14/30.9 21/46.3 42/92.6
without tool holder

3
Advantages of Using the PARAT 4-Way Turret
■ High reproducible accuracy of 0.005 mm when turning out and back in
■ No additional finishing cuts with fits
■ Less opening of the sliding guard
■ Fewer exchanges of the tool holder
■ Fast and simple exchange through eccentric clamping
■ Clamping bolt with high shock absorption and expansion zone on the thread to reduce forces
in case of accidents
■ Clamping bolt with coolant bore, which enables a shorter coolant hose
■ Wide range of quick-change holders for all tools
■ 5 year manufacturer’s warranty

Internal coolant
The clamping bolt with internal coolant
facility can be utilized for all new but
also existing PARAT 4-Way Turret In-
dexing Systems (option at extra cost).
The above mentioned facility consists
of the following elements: PARAT clamping with IC
■ One Clamping Bolt with internal
boretwo threaded connectors Data:
■ One coolant hose
Size Thread/
■ One straight connector for coolant
Measurement “J”
supply
■ One elbow connector for coolant 2 M 20 x 2,5
supply 3 M 24 x 3
■ One plug screw (as illustrated on 4 M 24 x 3
left) 5 M 30 x 2

4
PARAT 4-Way Indexing Turret System Size 5
for turning machines with higher motor power

PARAT Turret RD 5 ‚PARAT Turret RD 1

Lengthened PARAT toolholders utilized correctly

4 examples of how to clamp cutting tools efficiently with short overhang

Type RD 2 with toolholder WD 2/25 Type RD 2 with toolholder WD 2/25 and WDR 2/25

Type RD 2 with toolholder WD 2/25 and WDL 2/25 Type RD 2 with toolholder WD 2/25 and WDR 2/25
and WDL 2/25

5
 PARAT toolholders for 4-Way Indexing Tu

Size Toolholder WD Toolholder WDL Toolholder WDR Toolh

Universal Internal machining External machining Intern

Type RD 1 WD 1/12 WDL 1/12 WDR 1/12 WDPL

WD 1/20 WDL 1/20 WDR 1/20
Type UD 1

Type RD 2 WD 2/25 WDL 2/25 WDR 2/25 WDPL

4-Way Indexing Turret
Type RD Type UD 2

Type RD 3 WD 3/32 WDL 3/32 WDR 3/32 WDPL

WD 3/40 WDL 3/40 WDR 3/40
Type UD 3

Type RD 4 WD 4/40 WDL 4/40 WDR 4/40 WDPL

WD 4/50 WDL 4/50 WDR 4/50

Universal System Type RD 5 WD 5/50 WDL 5/50 WDR 5/50 WDPL

Type UD

Toolholders Technical data

Size Type mm/inches mm/inches mm/inches mm/inches mm/inches mm/inches kg/lbs.
N O P R S U
1 WD 1/12 84/3.3070 24/0.9448 47/1.8503 14/0.5512 22/0.8661 — 0,7/1.54
WDL 1/12 100/3.9370 24/0.9448 47/1.8503 14/0.5512 22/0.8661 16/0.6299 0,8/1.76
WDR 1/12 100/3.9370 24/0.9448 47/1.8503 14/0.5512 22/0.8661 16/0.6299 0,8/1.76
WD 1/20 84/3.3070 33/1.2992 52/2.0472 20/0.7874 22/0.8661 — 0,8/1.76
WDL 1/20 100/3.9370 33/1.2992 52/2.0472 20/0.7874 22/0.8661 16/0.6299 0,9/1.98
WDR 1/20 100/3.9370 33/1.2992 52/2.0472 20/0.7874 22/0.8661 16/0.6299 0,9/1.98
WDPL 1/12 100/3.9370 28/1.1023 47/1.8503 16/0.6299 22/0.8661 16/0.6299 0,9/1.98
WB 1/30 84/3.3070 39/1.5354 47/1.8503 Ø30/1.1811 — — 0,8/1.76
WBW 1/30 84/3.3070 39/1.5354 47/1.8503 — — — 1,4/3.1
2 WD 2/25 110/4.3307 36/1.4330 66/2.5984 19/0.7480 33/1.2992 — 1,9/4.19
WDL 2/25 130/5.1181 36/1.4173 66/2.5984 19/0.7480 33/1.2992 20/0.7874 2,1/4.63
WDR 2/25 130/5.1181 36/1.4173 66/2.5984 19/0.7480 33/1.2992 20/0.7874 2,1/4.63
WDPL 2/25 130/5.1181 50/1.9685 62/2.4409 31/1.2205 33/1.2992 20/0.7874 2,3/5.07
WB 2/40 110/4.3307 51/2.0078 63/2.4802 Ø40/1.5748 — — 1,8/3.97
WBW 2/40 110/4.3307 51/2.0078 63/2.4802 — — — 3,2/7
3 WD 3/32 140/5.5118 44/1.7322 76/2.9921 25/0.9842 33/1.2992 — 3,0/6.61
WDL 3/32 165/6.4961 44/1.7322 76/2.9921 25/0.9842 33/1.2992 25/0.9842 3,4/7.50
WDR 3/32 165/6.4961 44/1.7322 76/2.9921 25/0.9842 33/1.2992 25/0.9842 3,4/7.50
WDPL 3/32 165/6.4961 53/2.0866 66/2.5984 Ø31/1.2204 33/1.2992 25/0.9842 3,6/7.94
WD 3/40 140/5.5118 44/1.7322 76/2.9921 25/0.9842 43/1.6929 — 3,1/6.8
WDL 3/40 165/6.4961 44/1.7322 76/2.9921 25/0.9842 43/1.6929 25/0.9842 3,4/7.50

6
urret and Universal Quick Change System

holder WDPL Toolholder WB Toolholder WBW Boring Sleeve MK Sleeve slottet

nal machining Internal machining For individually (for dia. Ø)
akjustment
L 1/12 WB 1/30 WBW 1/30 MK 1/30 8, 10, 12, 15,
MK 2/30 16, 20, 25

L 2/25 WB 2/40 WBW 2/40 MK 3/40 10, 12, 15, 16,

MK 4/40 20, 25, 32

L 3/32 WB 3/40 WBW 3/40 MK 3/40 20, 25, 32, 40

WB 3/50 WBW 3/50 MK 4/40
MK 3/50
MK 4/50
L 4/40 WB 4/60 WBW 4/60 MK 4/60 25, 32, 40, 50
MK 5/60

L 5/50 WB 5/80 WBW 5/80 MK 4/60 25, 32, 40, 50

MK 5/60 + adapter for ø 80
+ adapter for ø 80

Technical data
Size Type mm/inches mm/inches mm/inches mm/inches mm/inches mm/inches
N O P R S U kg/lbs.
3 WDR 3/40 165/6.4961 44/1.7322 76/2.9921 25/0.9842 43/1.6929 25/0.9842 3,4/7.50
WB 3/40 140/5.5118 53/2.0866 66/2.5984 — — 2,7/5.96
WB 3/50 140/5.5118 63/2.4803 76/2.9921 — — 3,5/7.72
WBW 3/40 140/5.5118 53/2.0866 66/2.5984 — — — 4,3/9.5
WBW 3/50 140/5.5118 63/2.4803 76/2.9921 — — — 5,7/12.6
4 WD 4/40 160/6.2992 53/2.0866 96/3.7795 30/1.1811 44/1.7322 — 5,0/11.03
WDL 4/40 190/7.4803 53/2.0866 96/3.7795 30/1.1811 44/1.7322 30/1.1811 5,8/12.80
WDR 4/40 190/7.4803 53/2.0866 96/3.7795 30/1.1811 44/1.7322 30/1.1811 5,8/12.80
WDPL 4/40 190/7.4803 63/2.4803 96/3.7795 40/1.5748 52/2.0472 30/1.1811 6,5/14.34
WD 4/50 160/6.2992 63/2.4803 96/3.7795 40/1.5748 54/2.1259 — 5,5/12.14
WDL 4/50 190/7.4803 63/2.4803 96/3.7795 40/1.5748 54/2.1259 30/1.1811 6,0/13.24
WDR 4/50 190/7.4803 63/2.4803 96/3.7795 40/1.5748 54/2.1259 30/1.1811 6,0/13.24
WB 4/60 160/6.2992 77/3.0314 96/3.7795 Ø60/2.3621 — — 6,0/13.24
WBW 4/60 160/6.2992 81/3.1889 96/3.7795 — — — 10,0/22.0
5 WD 5/50 220/8.6614 67/2.6377 114/4.4881 40/1.5748 54/2.1259 — 9,6/21.18
WDL 5/50 260/10.2359 67/2.6377 114/4.4881 40/1.5748 54/2.1259 40/1.5748 10,6/23.39
WDR 5/50 67/2.6377 114/4.4881 40/1.5748 54/2.1259 40/1.5748 10,6/23.39
WDPL 5/50 74/2.9133 114/4.4881 51/2.0078 54/2.1259 40/1.5748 10,5/23.17
WB 5/80 220/8.6614 120/4.7244 Ø80 — — 13,2/29.1
WBW 5/80 220/8.6614 120/4.7244 — — — 23,5/51.8

7
PARAT SRD Turret with PSC- or KM holders

The Parat SRD Turret

Developed for holding two modular clamping

points in a L-arrangement on the basis of the
proven PARAT 4-way turret, with an accu-
racy that is particularly suitable for these
holders. A choice of PSC or KM holders are
SRD with PSC ( Capto ) available.

Internal coolant supply To ensure optimum cooling, the internal

through the main body to coolant facility enables the coolant to be
the tool cutting edge through the clamping bolt to the cutting
edge of the tool. The special L-arrangment
with the diagonal PARAT clamping point me-
ans that when using long drilling bars there
is no risk of collision with the sliding cover.
Consequently, the complete turning diame-
ter of the machine remains available.

Lengthened quick-change tool holders ena-

ble your standard tools to be used in con-
junction with the diagonal PARAT clamping
point as they ensure that your tools have the
optimum clearance.

Patented 90 degree arrangement of the tools for optimum safety. No risk of collisions with longer tools.

8
Technical data to define suitable size

Description mm/inches mm/inches mm/inches mm/inches

Size 2 Size 3 Size 4 Size 5
Approx. drive power of the lathe kw/hp 15/20 25/33 45/60 65/87
Approx. torque at the main spindle Nm/lb/ft 700/516 1500/1106 7000/5162 12000/8850
Max. cutting tool cross section 25/0.9842 40/1.5748 50/1.9685 50/1.9865
Height of cutting edge B 47,8/1.8819 60,8/2.3937 78,1/3.0748 88,1/3.4685
Min. support width C 110-150/4.3307 150-180/5.9055 200-250/7.874 200-300/7.874
Basic square toolpost E Ø 100/3.9370 Ø 132/5.1968 Ø 150/5.9055 Ø 195/7.6772
SRD turning circle G Ø 290/11.4173 Ø 360/14.1732 Ø 412/16.2205 Ø 522/20.5512
Clamping bolt J (H7) 25/0.9842 35/1.3779 35/1.3779 45/1.7716
with collar and feather key K 18/0.7086 25/0.9842 30/1.1811 35/1.3779
Approx. weight in kg/lbs without 9,4/20.7 19,5/43 30,5/67,2 55/121,3
tool holder

Technical data

Size Type Art.-No.

2 SRD 2 with PSC32 P12000-C3
2 SRD 2 with PSC40 P12000-C4
3 SRD 3 with PSC40 P13000-C4
3 SRD 3 with PSC50 P13000-C5
4 SRD 4 with PSC50 P14000-C5
4 SRD 4 with PSC63 P14000-C6
5 SRD 5 with PSC63 P15000-C6
5 SRD 5 with PSC80 P15000-C8
2 SRD 2 with KM40 P12000-KM40
3 SRD 3 with KM40 P13000-KM40
3 SRD 3 with KM50 P13000-KM50
4 SRD 4 with KM50 P14000-KM50
4 SRD 4 with KM63 P14000-KM63
5 SRD 5 with KM63 P15000-KM63

9
PARAT toolholders for Turret SRD

Technical data

Size site of Type

lengthening
2 right WDR 2/25 SRD
2 left WDL 2/25 SRD WDL-SRD WDR-SRD
2 left WB 2/40 SRD
3 right WDR 3/32 SRD
3 left WDL 3/32 SRD
3 left WB 3/40 SRD
3 left WB 3/50 SRD
4 right WDR 4/40 SRD
4 left WDL 4/40 SRD
4 left WB 4/60 SRD
5 right WDR 5/50 SRD
5 left WDL 5/50 SRD WB-SRD
5 left WB 5/80 SRD

Toolholders Size Type mm/inches mm/inches mm/inches mm/inches mm/inches mm/inches kg/lbs.
N O P R S U
2 WDR 2/25 SRD 170/6.6929 36/1.4173 66/2.5984 19/0.7480 33/1.2992 60/2.3622 2,5/5.5
WDL 2/25 SRD 170/6.6929 36/1.4173 66/2.5984 19/0.7480 33/1.2992 60/2.3622 2,5/5.5
WB 2/40 SRD 170/6.6929 51/2.0079 63/2.4803 Ø 40/1.5748 - 60/2.3622 2,6/5.7
3 WDR 3/32 SRD 210/8.2677 44/1.7323 76/2.9921 25/0.9843 33/1.2992 70/2.7559 4,1/9
WDL 3/32 SRD 210/8.2677 44/1.7323 76/2.9921 25/0.9843 33/1.2992 70/2.7559 4,1/9
WB 3/40 SRD 210/8.2677 53/2.0866 66/2.5984 Ø 40/1.5748 - 70/2.7559 3,6/7.9
WB 3/50 SRD 210/8.2677 63/2.4803 66/2.5984 Ø 40/1.5748 - 70/2.7559 4,5/9.9
4 WDR 4/40 SRD 240/9.4488 53/2.0866 96/3.7795 30/1.1811 44/1.7323 80/3.1496 6,5/14.3
WDL 4/40 SRD 240/9.4488 53/2.0866 96/3.7795 30/1.1811 44/1.7323 80/3.1496 6,5/14.3
WB 4/60 SRD 240/9.4488 77/3.0315 96/3.7795 Ø 60/2.3622 80/3.1496 7,7/16.9
5 WDR 5/50 SRD 310/12.2047 67/2.6378 114/4.4882 40/1.5748 54/2.1260 90/3.5433 12/26.5
WDL 5/50 SRD 310/12.2047 67/2.6378 114/4.4882 40/1.5748 54/2.1260 90/3.5433 12/26.5
WB 5/80 SRD 310/12.2047 103/4.0551 120/4.7244 Ø 80/3.1496 - 90/3.5433 17,7/39

10
PARAT special toolholders for 4-Way Indexing Turret
and Universal Quick Change System

Size Toolholder WB Toolholder Toolholder

with PSC with KM with VDI
PSC32 - C3 - D 32 mm – VDI 20
PSC40 - C4 - D 40 mm KM 40 - D40 mm VDI 30
PSC50 - C5 - D 50 mm KM 50 - D50 mm VDI 40
PSC63 - C6 - D 63 mm KM 63 - D63 mm VDI 60
PSC80 - C8 - D 80 mm – –
RD 1 – – –
4-Way Turret RD
RD 2 WB 2 with PSC32 R WB 2 with KM40 R WB 2 VDI 20
WB 2 with PSC32 L WB 2 with KM40 L
WB 2 with PSC40 R WB 2 with KM40 R WB 2 VDI 30
WB 2 with PSC40 L WB 2 with KM40 L
RD 3 WB 3 with PSC40 R WB 3 with KM40 R
WB 3 with PSC40 L WB 3 with KM40 L WB 3 VDI 30
WB 3 with PSC50 R WB 3 with KM50 R WB 3 VDI 40
WB 3 with PSC50 L WB 3 with KM50 L
RD 4 WB 4 with PSC50 R WB 4 with KM50 R
WB 4 with PSC50 L WB 4 with KM50 L WB 4 VDI 40
WB 4 with PSC63 R WB 4 with KM63 R WB 4 VDI 60
WB 4 with PSC63 L WB 4 with KM63 L
RD 5 WB 5 with PSC63 R WB 5 with KM63 R WB 5 VDI 60
WB 5 with PSC63 L WB 5 with KM63 L
WB 5 with PSC80 R
WB 5 with PSC80 L

Size WB with
special bore
WB 4/80
WB 4/2 Zoll Size SP for large
WB 5/60 swing- dia. over
WB 5/100 bed of machine

WB 2/60
WB 3/60 Size WB lengthened
WB 3/2 Zoll toward left

11
 by

Your partner of supply and technical advice:

Xena by Machineries ISOTOP

745 rue Pierre-Caisse
Saint-Jean-sur-Richelieu
T 1.450.348.4950 S/F 1.800.465.4650
F 1.450.348.8661
info@xenacanada.ca
www.xenacanada.ca

Pictures, illustrations and technical descriptions are not binding. Inch/metric as well as kg/lbs. conversions are approximations. In the light of permanent
developments we reserve the right to any changes without prior notice. Version from 2012
www.xenacanada.ca info@xenacanada.ca

Price List PARAT Turret

Item No. Turret Size

PARAT 4-way indexing quick change turret RD 1

P 11000-10 Center clamping bolt for mounting with wall + fitting key

P 11000-11 Center clamping bolt for mounting with thread M 14

P 11000-IK Center clamping bolt for mounting with thread M 16

inner coolant and coolant pipe ( 4 bar )

P 11000-IKV Center clamping bolt for mounting with thread M 16

inner coolant and coolant pipe ( 40 bar )

Toolholders

P 11100 WD 1/12 1

P 11140 WD 1/20 1

P 11120 WDL 1/12 1

P 11160 WDL 1/20 1

P 11110 WDR 1/12 1

P 11150 WDR 1/20 1

P 11130 WDPL 1/12 1

P 11170 WB 1/30 1

P 11171 WBW 1/30 with unmachined cutting side 1

745 rue Pierre-Caisse, Saint-jean-sur-Richelieu, J3B 8C6 S/F 1.800.465.4650 -1 -

www.xenacanada.ca info@xenacanada.ca

Item No. Turret Size

PARAT 4-way indexing quick change turret RD 2

P 12000-10 Center clamping bolt for mounting with wall + fitting key

P 12000-11 Center clamping bolt for mounting with thread M 16

P 12000-IK Center clamping bolt for mounting with thread M 20

inner coolant and coolant pipe ( 4 bar )

QTY 1x
P 12000-IKV Center clamping bolt for mounting with thread M 20 INCLUDED
KIT RD2
inner coolant and coolant pipe ( 40 bar )

Toolholders

QTY 1x
INCLUDED
KIT RD2
P 12100 WD 2/25 2

P 12120 WDL 2/25 2

QTY 1x
INCLUDED
KIT RD2
P 12110 WDR 2/25 2

QTY 1x
INCLUDED
KIT RD2
P 12130 WDPL 2/25 2

P 12170 WB 2/40 2

QTY 2x
INCLUDED
KIT RD2
P 12186 WB 2/1,5" inches 2

P 12171 WBW 2/40 with unmachined cutting side 2

745 rue Pierre-Caisse, Saint-jean-sur-Richelieu, J3B 8C6 S/F 1.800.465.4650 -2-

www.xenacanada.ca info@xenacanada.ca

Item No. Turret Size

PARAT 4-way indexing quick change turret RD 3

P 13000-10 Center clamping bolt for mounting with wall + fitting key

P 13000-11 Center clamping bolt for mounting with thread M20

P 13000-IK Center clamping bolt for mounting with thread M24

inner coolant and coolant pipe ( 4 bar )

QTY 1x
P 13000-IKV Center clamping bolt for mounting with thread M24 INCLUDED
KIT RD3
inner coolant and coolant pipe ( 40 bar )

Toolholders

QTY 1x
INCLUDED
KIT RD3
P 13100 WD 3/32 3

P 13140 WD 3/40 3
QTY 1x
INCLUDED
KIT RD3
P 13120 WDL 3/32 3

P 13160 WDL 3/40 3

P 13110 WDR 3/32 3

P 13150 WDR 3/40 3

QTY 1x
INCLUDED
KIT RD3

P 13130 WDPL 3/32 3

745 rue Pierre-Caisse, Saint-jean-sur-Richelieu, J3B 8C6 S/F 1.800.465.4650 -3-

www.xenacanada.ca info@xenacanada.ca

Item No. Turret Size

Toolholders

P 13170 WB 3/40 3

P 13180 WB 3/50 3
QTY 2x
INCLUDED
KIT RD3
P 13185 WB 3/2" inches 3

P 13171 WBW 3/40 with unmachined cutting side 3

P 13181 WBW 3/50 with unmachined cutting side 3

745 rue Pierre-Caisse, Saint-jean-sur-Richelieu, J3B 8C6 S/F 1.800.465.4650 -4-

www.xenacanada.ca info@xenacanada.ca

Item No. Turret Size

PARAT 4-way indexing quick change turret RD 4

P 14000-10 Center clamping bolt for mounting with wall + fitting key

P 14000-11 Center clamping bolt for mounting with thread M24

P 14000-IK Center clamping bolt for mounting with thread M24

inner coolant and coolant pipe ( 4 bar )

P 14000-IKV Center clamping bolt for mounting with thread M24

inner coolant and coolant pipe ( 40 bar )

Toolholders

P 14100 WD 4/40 4

P 14140 WD 4/50 4

P 14120 WDL 4/40 4

P 14160 WDL 4/50 4

P 14110 WDR 4/40 4

P 14150 WDR 4/50 4

P 14130 WDPL 4/40 4

745 rue Pierre-Caisse, Saint-jean-sur-Richelieu, J3B 8C6 S/F 1.800.465.4650 -5-

www.xenacanada.ca info@xenacanada.ca

Item No. Turret Size

Toolholders

P 14170 WB 4/60 4

P 14186 WB 4/2,5" inches 4

P 14171 WBW 4/60 with unmachined cutting side 4

745 rue Pierre-Caisse, Saint-jean-sur-Richelieu, J3B 8C6 S/F 1.800.465.4650 -6-

www.xenacanada.ca info@xenacanada.ca

No. Turret Size

PARAT 4-way indexing quick change turret RD 5

P 15000-IK Center clamping bolt for mounting with thread M30x2,0

Inner coolant and coolant pipe ( 4 bar )

P 15000-IKV Center clamping bolt for mounting with thread M30x2,0

Inner coolant and coolant pipe ( 40 bar )

Toolholders

P 15100 WD 5/50 5

P 15120 WDL 5/50 5

P 15110 WDR 5/50 5

P 15130 WDPL 5/50 5

P 15170 WB 5/80 5

P 15171 WBW 5/80 with unmachined cutting side 5

745 rue Pierre-Caisse, Saint-jean-sur-Richelieu, J3B 8C6 S/F 1.800.465.4650 -7-

www.xenacanada.ca info@xenacanada.ca

PARAT Inox Steel Coolant Hose

High quality coolant hose made of stainless steel

for all systems with high colant pressure

Item No. Description

Set 1: Coolant hose total length 365 mm

Consisting of: ten 25 mm spacers,
two 40 mm spacers
P001-xxxx nozzle and adapter piece (please indicate)
Set 2: Coolant hose total length 225 mm
Consisting of: six 25 mm spacers,
one 40 mm spacer
P002-xxxx nozzle and adapter piece (please indicate)
Set 3: Coolant hose total length 150 mm
Consisting of: three 25 mm spacers,
one 40 mm spacer
P003-xxxx nozzle and adapter piece (please indicate)

per
P004-20 /-35 /-45 Nozzle: diameter 2, 3,5 oder 4,5 mm nozzle

P004-0530 Nozzle: 90 degrees with 5 holes

P004-0414 Flat nozzle: 14 mm

P005-25 25 mm spacer

P005-40 40 mm spacer

P005-70 70 mm spacer

P006-18 /-14 Adaper piece for G ¼, G ⅛ or M10x1 per Adapter

P007-18 Ball valve G ¼ i / G ¼ a, G ⅛ a, G ⅜ a or G ½ a

745 rue Pierre-Caisse, Saint-jean-sur-Richelieu, J3B 8C6 S/F 1.800.465.4650 -8-

www.xenacanada.ca info@xenacanada.ca

Sleeves with inner cone

Item No. Description Size

P 11200 20 MK 1 d 30 1

P 11210 20 MK 2 d 30 1

P 12200 21 MK 3 d 40 2 and 3

P 12210 21 MK 4 d 40 2 and 3

P 13200 22 MK 3 d 50 3

P 13210 22 MK 4 d 50 3

P 14200 23 MK 4 d 60 4

P 14210 23 MK 5 d 60 4

806098 Adapter 80 to 60 5

805098 Adapter 80 to 50 5

745 rue Pierre-Caisse, Saint-jean-sur-Richelieu, J3B 8C6 S/F 1.800.465.4650 -9-

www.xenacanada.ca info@xenacanada.ca

Slotted Sleeves

Item No. Dimensions Size

300850 d1=30, d2=08, d3=34, l1=50, l2=4 1
301050 d1=30, d2=10, d3=34, l1=50, l2=4 1
301250 d1=30, d2=12, d3=34, l1=50, l2=4 1
301550 d1=30, d2=15, d3=34, l1=50, l2=4 1
301650 d1=30, d2=16, d3=34, l1=50, l2=4 1
302050 d1=30, d2=20, d3=34, l1=50, l2=4 1
302550 d1=30, d2=25, d3=34, l1=50, l2=4 1

400878 d1=40, d2=08, d3=44, l1=78, l2=4 2 and 3

401078 d1=40, d2=10, d3=44, l1=78, l2=4 2 and 3
401278 d1=40, d2=12, d3=44, l1=78, l2=4 2 and 3
401578 d1=40, d2=15, d3=44, l1=78, l2=4 2 and 3
401678 d1=40, d2=16, d3=44, l1=78, l2=4 2 and 3
402078 d1=40, d2=20, d3=44, l1=78, l2=4 2 and 3
402578 d1=40, d2=25, d3=44, l1=78, l2=4 2 and 3
403078 d1=40, d2=30, d3=44, l1=78, l2=4 2 and 3
403278 d1=40, d2=32, d3=44, l1=78, l2=4 2 and 3

500888 d1=50, d2=08, d3=54, l1=88, l2=4 3

501688 d1=50, d2=16, d3=54, l1=88, l2=4 3
502088 d1=50, d2=20, d3=54, l1=88, l2=4 3
502588 d1=50, d2=25, d3=54, l1=88, l2=4 3
503088 d1=50, d2=30, d3=54, l1=88, l2=4 3
503288 d1=50, d2=32, d3=54, l1=88, l2=4 3
504088 d1=50, d2=40, d3=54, l1=88, l2=4 3

602088 d1=60, d2=20, d3=64, l1=88, l2=4 4

602588 d1=60, d2=25, d3=64, l1=88, l2=4 4
603288 d1=60, d2=32, d3=64, l1=88, l2=4 4
604088 d1=60, d2=40, d3=64, l1=88, l2=4 4
605088 d1=60, d2=50, d3=64, l1=88, l2=4 4

Further slotted sleeves on request

745 rue Pierre-Caisse, Saint-jean-sur-Richelieu, J3B 8C6 S/F 1.800.465.4650 - 10 -

www.xenacanada.ca info@xenacanada.ca

PARAT turret SRD with modular tooling system PSC

(ISO 26623-1) is equivalent to Capto®

ISO 26623-1 e.g. Capto D mm D mm

PSC32 C3 32 32
PSC40 C4 40 40
PSC50 C5 50 50
PSC63 C6 63 63
PSC80 C8 80 80

Item No. PARAT Turret SRD Size

(ISO 26623-1) is equivalent to Capto®

P12000-C4 SRD 2 with PSC40 2

P13000-C4 SRD 3 with PSC40 3

P13000-C5 SRD 3 with PSC50 3

P14000-C5 SRD 4 with PSC50 4

P14000-C6 SRD 4 with PSC63 4

P15000-C6 SRD 5 with PSC63 5

P15000-C8 SRD 5 with PSC80 5

Trautwein Vertriebs-GmbH, Klingwiesen 6-8, 71409 Schwaikheim, Telefon 07195-95990-41, FAX 07195-95990-49, www.trautwein-gmbh.de - 11 -
www.xenacanada.ca info@xenacanada.ca

Toolholders for PARAT Turret SRD

WB 2/40 SRD WDR 3/32 SRD

Item No. Toolholders Size Design

P 12110 SRD WDR 2/25 SRD 2 right

P 12120 SRD WDL 2/25 SRD 2 left
P 12170 SRD WB 2/40 SRD 2 left

P 13110 SRD WDR 3/32 SRD 3 right

P 13120 SRD WDL 3/32 SRD 3 left
P 13170 SRD WB 3/40 SRD 3 left
P 13180 SRD WB 3/50 SRD 3 left

P 14110 SRD WDR 4/40 SRD 4 right

P 14120 SRD WDL 4/40 SRD 4 left
P 14170 SRD WB 4/60 SRD 4 left

P 15110 SRD WDR 5/50 SRD 5 right

P 15120 SRD WDL 5/50 SRD 5 left
P 15170 SRD WB 5/80 SRD 5 left

745 rue Pierre-Caisse, Saint-jean-sur-Richelieu, J3B 8C6 S/F 1.800.465.4650 - 12 -

www.xenacanada.ca info@xenacanada.ca

Price List Toolholders WB with PSC-adapters

(ISO 26623-1) is equivalent to Capto®

ISO 26623-1 e.g. Capto D mm

PSC32 C3 32

PSC40 C4 40
PSC50 C5 50
PSC63 C6 63
PSC80 C8 80

Item No. Toolholders Size Design

P 121 C4 / R WB 2 with PSC40 2 right

P 121 C4 / L WB 2 with PSC40 2 left

P 131 C4 / R WB 3 with PSC40 3 right

P 131 C4 / L WB 3 with PSC40 3 left
P 131 C5 / R WB 3 with PSC50 3 right
P 131 C5 / L WB 3 with PSC50 3 left

P 141 C5 / R WB 4 with PSC50 4 right

P 141 C5 / L WB 4 with PSC50 4 left
P 141 C6 / R WB 4 with PSC63 4 right
P 141 C6 / L WB 4 with PSC63 4 left

P 151 C6 / R WB 5 with PSC63 5 right

P 151 C6 / L WB 5 with PSC63 5 left
P 151 C8 / R WB 5 with PSC80 5 right
P 151 C8 / L WB 5 with PSC80 5 left

745 rue Pierre-Caisse, Saint-jean-sur-Richelieu, J3B 8C6 S/F 1.800.465.4650 - 13 -

www.xenacanada.ca info@xenacanada.ca

Price List Toolholders WB with KM-adapters

(ISO 26622) is equivalent to KM

Item No. Toolholders Size Design

P 121 KM40 / R WB 2 with KM40 2 right

P 121 KM40 / L WB 2 with KM40 2 left

P 131 KM40 / R WB 3 with KM40 3 right

P 131 KM40 / L WB 3 with KM40 3 left
P 131 KM50 / R WB 3 with KM50 3 right
P 131 KM50 / L WB 3 with KM50 3 left

P 141 KM50 / R WB 4 with KM50 4 right

P 141 KM50 / L WB 4 with KM50 4 left
P 141 KM63 / R WB 4 with KM63 4 right
P 141 KM63 / L WB 4 with KM63 4 left

P 151 KM63 / R WB 5 with KM63 5 right

P 151 KM63 / L WB 5 with KM63 5 left

745 rue Pierre-Caisse, Saint-jean-sur-Richelieu, J3B 8C6 S/F 1.800.465.4650 - 14 -