Scribd
Upload
355 views1 page

Speedometer Gear

This document provides instructions for removing and installing a speedometer gear on a manual transmission. The removal process involves taking out the transmission assembly, switches, transfer case, transmission case, and vehicle speed sensor. The speedometer driven gear, oil seal, shaft and snap ring are then removed. For installation, the washer, shaft and new oil seal are pressed in. The speedometer gear and new snap ring are installed, followed by reversing the removal steps. The speedometer gear, oil seal and shaft should be inspected for damage and replaced if needed.

Uploaded by

Linas Paskocimas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
355 views1 page

Speedometer Gear

This document provides instructions for removing and installing a speedometer gear on a manual transmission. The removal process involves taking out the transmission assembly, switches, transfer case, transmission case, and vehicle speed sensor. The speedometer driven gear, oil seal, shaft and snap ring are then removed. For installation, the washer, shaft and new oil seal are pressed in. The speedometer gear and new snap ring are installed, followed by reversing the removal steps. The speedometer gear, oil seal and shaft should be inspected for damage and replaced if needed.

Uploaded by

Linas Paskocimas
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as PDF, TXT or read online on Scribd
You are on page 1/ 1

asieps.

book 72 ページ ２００７年１０月２４日　水曜日　午後５時２６分

Speedometer Gear
MANUAL TRANSMISSION AND DIFFERENTIAL

19.Speedometer Gear 4) Install the transmission case. <Ref. to 5MT-49,


INSTALLATION, Transmission Case.>
A: REMOVAL 5) Install the transfer case together with the exten-
1) Remove the manual transmission assembly sion case assembly. <Ref. to 5MT-37, INSTALLA-
from the vehicle. <Ref. to 5MT-24, REMOVAL, TION, Transfer Case and Extension Case
Manual Transmission Assembly.> Assembly.>
2) Remove the back-up light switch and the neutral 6) Install the back-up light switch and neutral posi-
position switch. <Ref. to 5MT-33, REMOVAL, tion switch. <Ref. to 5MT-33, INSTALLATION,
Switches and Harness.> Switches and Harness.>
3) Remove the transfer case together with the ex- 7) Install the manual transmission assembly to the
tension case assembly. <Ref. to 5MT-37, REMOV- vehicle. <Ref. to 5MT-26, INSTALLATION, Manual
AL, Transfer Case and Extension Case Transmission Assembly.>
Assembly.>
4) Remove the transmission case. <Ref. to 5MT-
C: INSPECTION
49, REMOVAL, Transmission Case.> Check the speedometer gear, oil seal and speed-
ometer shaft for damage. Replace if damaged.
5) Remove the vehicle speed sensor. <Ref. to
5MT-35, REMOVAL, Vehicle Speed Sensor.>
6) Remove the outer snap ring and pull out the
speedometer driven gear. Next, remove the oil
seal, speedometer shaft and washer.

(A) (B)

MT-00301

(A) Outer snap ring


(B) Speedometer driven gear

B: INSTALLATION
1) Install the washer and speedometer shaft, and
press fit a new oil seal with ST.
ST 899824100 or 499827000PRESS
2) Install the vehicle speed sensor. <Ref. to 5MT-
35, INSTALLATION, Vehicle Speed Sensor.>
3) Install the speedometer driven gear and a new
snap ring.

(A) (B)

MT-00301

(A) Outer snap ring


(B) Speedometer driven gear

5MT-72

You might also like