Thrust Cylinders

Series C0D and C0P

Catalogue PDE2563TCUK-ul
C0D and C0P Thrust cylinders
Features Air Hydraulic Electro
cylinder cylinder mechanical
actuators

Overload safe *** *** *

Easy to limit force *** *** *

Easy to vary speed *** *** *

Speed *** ** **

Reliability *** *** ***

Robustness *** *** *

Installation cost *** * **

Ease of service *** ** *

Safety in damp environments *** *** *

Safety in explosive atmospheres *** *** *

Safety risk with electrical installations *** *** *

Risk of oil leak *** * ***

Clean, hygienic *** ** *

Standardised measurements *** *** *

Service life *** *** *

Hydraulic system required *** * ***

Weight *** ** **

Purchase price *** ** *

Power density ** *** *

Noise level during operation ** *** **

High force for size ** *** *

Positioning possibilities * *** ***

Total energy consumption * ** ***

Service interval * ** ***

Compressor capacity required * *** ***

* = good, **=average, ***=excellent

Important
Before attempting any external or internal work
Note
All technical data in this catalogue are typical
on the cylinder or any connected components,
data only.
make sure the cylinder is vented and disconnect
Air quality is essential for maximum cylinder ser-
the air supply in order to ensure isolation of the
vice life (see ISO 8573).
air supply.

WARNING
FAILURE OR IMPROPER SELECTION OR IMPROPER USE OF THE PRODUCTS AND/OR SYSTEMS DESCRIBED HEREIN OR RELATED ITEMS CAN CAUSE DEATH, PERSONAL INJURY AND
PROPERTY DAMAGE.
This document and other information from Parker Hannifin Corporation, its subsidiaries and authorized distributors provide product and/or system options for further investigation by users having technical expertise. It is
important that you analyze all aspects of your application and review the information concerning the product or system in the current product catalog. Due to the variety of operating conditions and applications for these
products or systems, the user, through its own analysis and testing, is solely responsible for making the final selection of the products and systems and assuring that all performance, safety and warning requirements of the
application are met. The products described herein, including without limitation, product features, specifications, designs, availability and pricing, are subject to change by Parker Hannifin Corporation and its subsidiaries at any
time without notice.

SALE CONDITIONS
The items described in this document are available for sale by Parker Hannifin Corporation, its subsidiaries or its authorized distributors. Any sale contract entered into by Parker will be governed by the provisions stated in
Parker’s standard terms and conditions of sale (copy available upon request).

05.10

2 www.parker.com/euro_pneumatic
C0D and C0P Thrust cylinders

Contents Page
COD and COP Thrust cylinders .....................................................................4
Main data........................................................................................................5
Material specification .....................................................................................5
Working medium, air quality ..........................................................................5
Order key, Diaphragm type ............................................................................6
Order key, Piston type ....................................................................................6
Ordering data for C0D and C0P thrust cylinders ...........................................7
Dimensions: piston and diaphragm type .......................................................8
Neck mounting nut and piston rod nut ...........................................................9
Seal kits and grease for C0D and C0P ...........................................................9
Press stand for thrust cylinders ....................................................................10
Dimensions, press stand ..............................................................................11

05.10

3 www.parker.com/euro_pneumatic
C0D and C0P Thrust cylinders

Double action compressed

air cylinder with piston. Also
available as single-action, and
as single or double action with
diaphragm.

Zinc-plated steel
housing.

Threaded nose for

easy attachment.
Externally
threaded
piston
rod.

COD and COP

Thrust cylinders
The thrust cylinders are linear actuators, designed for a high The cylinder body is an all zinc plated sheet of steel and the
force to size ratio. This makes the cylinder ideal to use for piston rod, which is guided in two maintenance free bearings,
clamping, riveting, punching and similar applications where a is provided with flats and a male thread.
high force is required. To facilitate the installation, the guiding sleeve is provided
The range includes 14 different versions, providing forces with a thread which can be used either for direct mounting in
from 1600 to 25 000 N (at 6 bar), single- as well as double- a threaded hole or for installation in a free running hole using a
acting and in piston or diaphragm design. lock nut.
The single-acting version has a built in powerful spring for
the return stroke, but for applications where a high force is
required in both directions there is the double-acting version.

05.10

4 www.parker.com/euro_pneumatic
C0D and C0P Thrust cylinders
Main data
Thrust cylinder Force 1) at Stroke 2) Spring force Weight Displacement 3) Port thread
600 kPa (6 bar) Max Min plus minus
N mm N N Kgs dm3 dm3
Double acting
C0D300-40 3000 40 - - 2,6 0,50 0,42 G1/4
C0D600-50 6000 50 - - 5,4 1,05 0,92 G1/4
C0D1200-50 12000 50 - - 11,4 1,96 1,90 G1/2
C0P2500-60 25000 60 - - 21,4 3,50 3,40 G1/2
C0P2500-80 25000 80 - - 21,6 4,40 4,30 G1/2
Single acting
C0P160-50S 1600 50 314 128 1,0 0,12 - G1/4
C0P160-80S 1600 80 314 128 1,0 0,20 - G1/4
C0P300-50S 3000 50 314 128 1,5 0,30 - G1/4
C0P300-80S 3000 80 314 128 1,5 0,50 - G1/4
C0D300-40S 3000 40 294 98 2,8 0,50 - G1/4
C0D600-50S 6000 50 638 98 5,6 1,05 - G1/4
C0D1200-50S 12000 50 981 235 12,2 1,96 - G1/2
C0P2500-60S 25000 60 2700 883 22,0 3,50 - G1/2
C0P2500-100S 25000 100 2700 883 22,2 5,40 - G1/2
1) In the case of single-acting thrust cylinders, spring force must be considered in calculation of performance.
2) Tolerance ±3 mm (C0P2500 +6/-1)
3) The displacement relates to plus and minus chambers and includes dead volume.

Additional data Working medium, air quality

Working pressure Max 8 bar Working medium Dry, filtered compressed air
Working temperature -20 °C to +70 °C to ISO 8573-1 class 3.4.3.

Prelubricated, further lubrication is not normally necessary. Recommended air quality for cylinders
If additional lubrication is introduced it has to be continued. For best possible service life and trouble-free operation, ISO 8573-1
quality class 3.4.3 should be used. This means 5 µm filter (standard
Material specification filter) dew point +3 ºC for indoor operation (a lower dew point should
Cylinder housing Painted steel plate be selected for outdoor operation) and oil concentration 1.0 mg oil/m3,
Piston Steel which is what a standard compressor with a standard filter gives.
Piston rod Steel
Piston rod nut Steel ISO 8573-1 quality classes
Diaphragm, COD Textile reinforced nitrile rubber,NBR
Seals Nitrile rubber, NBR Quality Pollution Water Oil
Piston rod bearings Lubricant filled thermoplastic class particle max con- max. press. max con-
Return spring Spring steel size centration dew point centration
(µm) (mg/m³) (°C) (mg/m³)
1 0,1 0,1 -70 0,01
2 1 1 -40 0,1
3 5 5 -20 1,0
4 15 8 +3 5,0
5 40 10 +7 25
6 - - +10 -

NOTE!
Compressed air cylinders, types C0P and C0D should not be
used in vertical applications without an external stop.

05.10

5 www.parker.com/euro_pneumatic
C0D and C0P Thrust cylinders
Order key, Diaphragm type

C0D 300 - 50 S
Cylinder version Cylinder force in N Stroke Length, mm Single acting

D Diaphragm 300 3000

600 6000

1200 12000

Order key, Piston type

C0P 300 - 50 S
Cylinder version Cylinder force in N Stroke Length, mm Single acting

P Piston 160 1600

300 3000

2500 25000

05.10

6 www.parker.com/euro_pneumatic
C0D and C0P Thrust cylinders

C0D C0P
Main data for C0D and C0P thrust cylinders
Symbol Force at 6 bar Conn. Stroke Weight Order code
N mm Kg
Double acting 3000 G1/4 40 2,7 C0D300-40
6000 G1/4 50 5,7 C0D600-50
12000 G1/2 50 11,5 C0D1200-50
25000 G1/2 60 21,4 C0P2500-60
25000 G1/2 80 21,6 C0P2500-80

Symbol Force at 6 bar Spring force Conn. Stroke Weight Order code
N Max N Min N mm Kg
Single acting 1600 314 128 G1/4 50 0,9 C0P160-50S
1600 314 128 G1/4 80 1,1 C0P160-80S
3000 314 128 G1/4 50 1,2 C0P300-50S
3000 314 128 G1/4 80 1,4 C0P300-80S

3000 294 98 G1/4 40 2,8 C0D300-40S

6000 638 98 G1/4 50 5,9 C0D600-50S
12000 981 235 G1/2 50 12,4 C0D1200-50S
25000 2700 883 G1/2 60 22,0 C0P2500-60S
25000 2700 883 G1/2 100 22,4 C0P2500-100S

Thrust cylinders are supplied complete with piston rod nut.

The spring forces in single acting cylinders are sufficient to
return the piston rod without load.

05.10

7 www.parker.com/euro_pneumatic
C0D and C0P Thrust cylinders
Dimensions: piston type CAD drawings on the Internet
Our home page www.parker.com/euro_pneumatic includes the
AirCad Drawing Library with 2D drawings for the main versions.

A A
A

C0P160-50S C0P2500-60S C0P2500-60

C0P160-80S C0P2500-100S C0P2500-80
C0P300-50S
C

C
C0P300-80S
C

B
B

L M L M
D

D
D

L K K
E

E
K I N I
E

N N
F

F
F

G
G

G
H H H

Single-acting Single-acting Double-acting

Type Connection A B C D E F G H I K L M N
thread Ø Ø

C0P160-50S G1/4 66 192 151 18 30 11 24 M12x1,75 14 M24x3 30 30 12

C0P160-80S G1/4 66 222 181 18 30 11 24 M12x1,75 14 M24x3 30 30 12
C0P300-50S G1/4 93 192 151 18 30 11 24 M12x1,75 14 M24x3 30 30 12
C0P300-80S G1/4 93 222 181 18 30 11 24 M12x1,75 14 M24x3 30 30 12
C0P2500-60S G1/2 268 345 285 33 40 20 48 M24x3 28 M48x3 56 50 25
C0P2500-100S G1/2 268 385 325 33 40 20 48 M24x3 28 M48x3 56 50 25
C0P2500-60 G1/2 268 345 285 33 40 20 48 M24x3 28 M48x3 56 50 25
C0P2500-80 G1/2 268 385 325 33 40 20 48 M24x3 28 M48x3 56 50 25

Dimensions: diaphragm type

A A A
M

M
C

C
B

B
D

L L
K K
E

I N I N
F

C0D300-40S C0D300-40S C0D300-40 C0D300-40

G

C0D600-50S C0D600-50S C0D600-50 C0D600-50

H C0D1200-50S C0D1200-50S C0D1200-50 H C0D1200-50
Single-acting Double-acting

Type Connection A B C D E F G H I K L M N
thread Ø Ø

C0D300-40S G1/4 150 183 131 48 38 14 24 M12x1,75 16 M24x2 30 90 13

C0D300-40 G1/4 150 183 131 48 38 14 24 M12x1,75 16 M24x2 30 90 13
C0D600-50S G1/4 195 212 154 55 38 20 32 M16x2 20 M36x3 43 107 17
C0D600-50 G1/4 195 212 154 55 38 20 32 M16x2 20 M36x3 43 107 17
C0D1200-50S G1/2 261 243 178 58 45 20 40 M20x2,5 25 M36x3 43 117 22
C0D1200-50 G1/2 261 243 178 58 45 20 40 M20x2,5 25 M36x3 43 117 22

05.10

8 www.parker.com/euro_pneumatic
C0D and C0P Thrust cylinders

Neck mounting nut Piston rod nut

Neck mount. nut Weight For cylinder Order code Piston rod nut Weight For cylinder Order code
thread Kg thread Kg
M24x2 0,04 C0D300-40 9141100000 M12 0,01 C0D300-40 0266211200
M36x3 0,14 C0D600-50 9141100100 M16 0,02 C0D600-50 0266211400
M36x3 0,14 C0D1200-50 9141100100 M20 0,03 C0D1200-50 0266211600
M48x3 0,10 C0P2500-60 9141100200 M24 0,04 C0P2500-60 0266211800
M48x3 0,10 C0P2500-80 9141100200 M24 0,04 C0P2500-80 0266211800

M24x3 0,04 C0P160-50S 9141100300 M12 0,01 C0P160-50S 0266211200

M24x3 0,04 C0P160-80S 9141100300 M12 0,01 C0P160-80S 0266211200
M24x3 0,04 C0P300-50S 9141100300 M12 0,01 C0P300-50S 0266211200
M24x3 0,04 C0P300-80S 9141100300 M12 0,01 C0P300-80S 0266211200

M24x2 0,04 C0D300-40S 9141100000 M12 0,01 C0D300-40S 0266211200

M36x3 0,14 C0D600-50S 9141100100 M16 0,02 C0D600-50S 0266211400
M36x3 0,14 C0D1200-50S 9141100100 M20 0,03 C0D1200-50S 0266211600
M48x3 0,10 C0P2500-60S 9141100200 M24 0,04 C0P2500-60S 0266211800
M48x3 0,10 C0P2500-100S 9141100200 M24 0,04 C0P2500-100S 0266211800
Thrust cylinders are supplied complete with piston rod nut.

Seal kits for C0D and C0P Grease for C0D and C0P
Description Order code Weight Order code

C0D300-40/-40S 9121655401 30 g 9127394541

C0D600-50/-50S 9121655501
C0D1200-50/-50S 9121655601
C0P160-50S/-80S 9121655101
C0P300-50S/-80S 9121655201
C0P2500-60/-80 9121655301
C0P2500-60S/-100S 9121655302

05.10

9 www.parker.com/euro_pneumatic
C0D and C0P Thrust cylinders
Press stand for thrust cylinders
A simple press for efficient mounting and pressing can easily
be built by screwing the thrust cylinders into the threaded
holes in the very stable and strong steel press stand. The
stand is available in two versions with different fastening
threads for the cylinders.
The top plate has two different threads, and can be rotated
through 180 degrees to present the correct thread for nose
fitting of the cylinders.
The sub-base is fitted with a T-track for easy mounting
of accessories. It also has two through holes for simple and
secure fitting to a work bench.

NOTE! Remember that an approved two-handed

press control must be used with the cylinders and the
press stand to prevent crush injuries.
We recommend the use of our type PXP two-handed
press control. It is available in a number of versions,
and is simple, ergonomic and safe to incorporate in
the press stand. It meets the requirements of safety
standards EN574 and EN954-1.

For more information, see our website:

www.parker.com/euro_pneumatic

Description Threads Weight Order No.

A/B kg

Press stand for C0P160-50S, C0P160-80S, M24x2/M24x3 24 C0P-C0D-P01

C0P300-50S, C0P300-80S, C0D300-40,
C0D300-40S and C0D300-50S

Press stand for C0D600-40, C0D600-50S, M36x3/M48x3 24 C0P-C0D-P02

C0D1200-50S, C0D1200-80S, C0P2500-60,
C0P2500-80, C0P2500-60S and C0P2500-100S

05.10

10 www.parker.com/euro_pneumatic
C0D and C0P Thrust cylinders
Dimensions

100 100

32

300
218

125

65
A
40

150 250

10
A
A B
9
9

19

05.10

11 www.parker.com/euro_pneumatic