Scribd
Upload
146 views4 pages

Calibration Record for Technicians

This document records the calibration of a vernier caliper and outside micrometer. The vernier caliper calibration involves measuring the outside jaw, inside jaw, and depth and comparing the measurements to standard values. The outside micrometer calibration checks the anvils, thimble, and ratchet against standard values. Both calibrations note the date, calibrated by, tolerance, serial number, and whether the measurements were in specification.

Uploaded by

vishal patel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
146 views4 pages

Calibration Record for Technicians

This document records the calibration of a vernier caliper and outside micrometer. The vernier caliper calibration involves measuring the outside jaw, inside jaw, and depth and comparing the measurements to standard values. The outside micrometer calibration checks the anvils, thimble, and ratchet against standard values. Both calibrations note the date, calibrated by, tolerance, serial number, and whether the measurements were in specification.

Uploaded by

vishal patel
Copyright
© © All Rights Reserved
We take content rights seriously. If you suspect this is your content, claim it here.
Available Formats
Download as XLSX, PDF, TXT or read online on Scribd
You are on page 1/ 4

Vernier Caliper Calibration Re

Tolerance: +/- 0.002" or +


Description: OR
Custom Toleranc
Type: Metric Imperial _____________________
Location: Calibration Interval:
Shop: 1 Year
Ambient Temp (oC) =

Step 1 Step 2
Outside Jaw
Calibration Metric/
Calibrated By:
Date: Imperial Standard
Visual Inspection
Value

Imperial

Pass Fail

Metric

Comments:
er Calibration Record Sheet
Tolerance: +/- 0.002" or +/- 0.05mm
OR
Custom Tolerance:
_______________________
Calibration Interval: Calibration Procedure: Serial No.:
1 Year

Step 2 Step 3 Step 4


Outside Jaw Inside Jaw Depth
In Specs.
Measured Standard Measured Standard Measure
Value Value Value Value d Value

Yes
No

Next Calibration Date: Standard Deviation

Danger
Zone
Outside Micrometer Calibration
Description: Tolerance: +/- 0.0002" or +/- 0

Type: Metric Imperial Custom Tolerance: _____________

Location: Calibration Interval:


Shop: 1 Year
Ambient Temp (oC) =
Step 1 Step 2 Step 3
Calibration Calibrated
Date: By: Anvil(s) and Standard
Ratchet
Thimble Value

Pass Pass
Fail Fail
ometer Calibration Record Sheet
Tolerance: +/- 0.0002" or +/- 0.005mm OR

Custom Tolerance: __________________________

Calibration Interval: Calibration Procedure: Serial No.:


1 Year _________________________________________

Step 3 Step 4
Next
Comment
Measured Standard Measured In Specs. Calibration
s:
Value Value Value Date:

Anv:
Anv:
Anv:
Anv: Yes
Rod: No
Rod:
Rod:
Rod:
Standard Deviation

You might also like