LX-35 Series

3.5 Tonne - Pneumatic Model

NISSAN FORKLIFT EUROPE B.V.

http://www.nissan-nfe.com SEN-1F2-01.NFE/07-08-3000 Printed in the Netherlands
Nissan Motor Co., Ltd. reserves the right to make any changes without notice concerning colors, equipment or specifications detailed in this brochure, or to discontinue individual models.
The colors of vehicles delivered may differ slightly from those in this brochure. The specifications vary for different countries depending on local market conditions. Please consult your local
dealer to ensure that the vehicle delivered accords with your expectations. All values given may vary, due to motor and system tolerances and operational conditions. Some equipment
shown on photos are optional.

SEN-LX35-01_NFE-V1-71715.indd 4-Sec1:1 22-11-2007 09:54:05

 STANDARD SPECIFICATIONS DIMENSIONS

Counterbalance trucks VDI 2198

Data sheet for materials handling equipment
September 2007 Designation according VDI 3586 Registration note
Manufacturers Data and Design Characteristics
1.1 Manufacturer Nissan Nissan
1.2 Model name LX-35 LX-35
CHARACTERISTICS

1.3 Power unit: Electric, Diesel, Gasoline, LPG,others Gasoline / LPG Diesel
1.4 Operation: Sit, Hand, Pedestrian, Standing, Order picking Sit Sit

1.5 Load capacity Q (t) 3.5 3.5

1.6 Load centre c (mm) 500 500
1.8 Front overhang x (mm) 485 485
1.9 Wheel base y (mm) 1700 1700
2.1 Service weight kg 4605 4730
WEIGHTS

2.2 Axle load with load, front/rear kg 7140/965 7190/1040

2.3 Axle load without load, front/rear kg 1615/2990 1665/3065
3.1 Tyres front/rear (C=Cushion,SE=superelastic,P=pneumatic) Pneumatic
MAST SPECIFICATIONS & RATED CAPACITIES: LX-35
WHEELS & TYRES

3.2 Tyre size, front 250-15-16PR(I) 250-15-16PR(I)

3.3 Tyre size, rear 6.50-10-12PR(I) 6.50-10-12PR(I) Overall Height Free Lift Tilt angle Load capacity
3.5 Wheels, number front/rear (x=powered) 2x/2 2x/2 Mast Mast Maximum Fully extended Load centre 500 mm
Type Name fork height Fully lowered Without backrest With STD backrest Without backrest With STD backrest Forward/backward 3.5 tonne
3.6 Tread, front b10(mm) 1060 1060
mm1) mm1) mm1) mm1) mm1) mm1) degrees kg1)
3.7 Tread, rear b11(mm) 980 980
2W300 3000 2185 3740 4140 160 160 6/12 3500
4.1 Tilt Mast/carriage, forward/backward α/β (°) 6/12 6/12 2W330 3300 2320 4040 4440 160 160 6/12 3500
4.2 Height mast fully lowered h1 (mm) 2185 2185
2W350 3500 2445 4240 4640 160 160 6/12 3500

TWO STAGE
WIDE VIEW
4.3 Free lift h2 (mm) 160 160
2W370 3700 2635 4440 4840 160 160 6/12 3500
4.4 Lift height h3 (mm) 3000 3000
2W400 4000 2885 4740 5140 160 160 6/12 3450
4.5 Height mast fully extended h4 (mm) 4140 4140
2W450 4500 3135 5240 5640 160 160 6/6 3400
4.7 Overhead guard height h6 (mm) 2155 2155
2W500 5000 3385 5740 6140 160 160 6/6 3300
4.8 Seat height/Standing height h7 (mm) 1055 1055
2F300 3000 2185 3790 4140 1440 1090 6/12 3500
4.12 Towing coupler height h10 (mm) 420 420
2F330 3300 2320 4090 4440 1575 1225 6/12 3500

TWO STAGE
FULL FREE
4.19 Overall length l1 (mm) 3850 3850
2F350 3500 2445 4290 4640 1700 1350 6/12 3500
DIMENSIONS

4.20 Length to fork face l2 (mm) 2780 2780

2F370 3700 2635 4490 4840 1890 1540 6/12 3500
4.21 Overall width b1(mm) 1280 1280
2F400 4000 2885 4790 5140 2140 1790 6/12 3450
4.22 Fork dimensions s/e/l (mm) 45x122x1070 45x122x1070
3F385 3850 2035 4670 4990 1260 940 6/6 3500
4.23 Carriage DIN 15173, Class / Form A,B 3A 3A
3F430 4300 2185 5120 5440 1410 1090 6/6 3450
4.24 Carriage width b3 (mm) 1020 1020
3F475 4750 2320 5570 5890 1545 1225 6/6 3400

THREE STAGE
4.31 Mast underclearance loaded m1 (mm) 155 155

FULL FREE
3F515 5150 2445 5975 6295 1670 1350 6/6 3250*
4.32 Underclearance centre wheelbase m2 (mm) 190 190
3F550 5500 2635 6320 6640 1860 1540 6/6 3200*
4.33 Right angle stacking aisle with pallet 1000 x 1200 across forks Ast (mm) 4105 4105
3F600 6000 2885 6820 7140 2110 1790 6/6 3100*
4.34 Right angle stacking aisle with pallet 800 x 1200 across forks Ast (mm) 3905 3905
3F650 6500 3135 7320 7640 2360 2040 6/6 2500*
4.35 Turning radius Wa (mm) 2420 2420
3F700 7000 3385 7820 8140 2610 2290 6/6 2200*
4.36 Turning radius, inner b13 (mm) 70 70 1)
1 inch = 25.4 mm 1kg = 0.4536 lb * Load capacity with double tires. Overall truck width: 1720 mm.
5.1 Travelling speed with/without load km/h 19/19 19/19
5.2 Lifting speed with/without load mm/s 450/470 440/480
PERFORMANCE

5.3 Lowering speed with/without load mm/s 420/360 420/360

5.5 Drawbar pull, with/without load kN 17.3/11.8 21.7/11.8
5.7 Gradeability with/without load % 22/22 28/23
5.9 Acceleration with/without load s 5.1/4.2 5.5/4.5
5.10 Service brake Hydraulic

7.1 Engine manufacturer/type Nissan K25 Nissan QD32

7.2 Engine rated power according ISO 1585 kW 46.9 38
DRIVE

7.3 Rated engine revolutions min-1 2700 2000

7.4 Number of cylinders/Displacement cm3 4/2488 4/3153
7.5 Fuel consumption according VDI cycle (60 cycles/hour) kg/h, l/h 6.0* 6.2
8.1 Type of drive control Torque convertor/1
OTHERS

8.2 Working pressure attachments bar 127 127

8.3 Oil flow for attachment l/min 70 65
8.4 Noise level operator’s ear according EN 12053 dB(A) 79 79
* LPG fuel consumption

SEN-LX35-01_NFE-V1-71715.indd Sec1:2-Sec1:3 22-11-2007 09:54:05