DSC-S650

SERVICE MANUAL
Ver. 1.2 2007.06
US Model
Canadian Model
Revision History
AEP Model
UK Model
How to use
Acrobat Reader
E Model
Australian Model
Hong Kong Model
Internal memory
ON BOARD
Chinese Model
Korea Model
Brazilian Model
Tourist Model

Link

SPECIFICATIONS DISASSEMBLY REPAIR PARTS LIST

SERVICE NOTE BLOCK DIAGRAMS

The components identified by Les composants identifiés par une

mark 0 or dotted line with marque 0 sont critiques pour la
mark 0 are critical for safety. sécurité.
Replace only with part num- Ne les remplacer que par une pièce
ber specified. portant le numéro spécifié.

In case of the lens assembly, main board, or main frame assembly failure,
contact your local Sony Service Headquarter for the measures.

DIGITAL STILL CAMERA

2007F0800-1
DSC-S650 © 2007.06
9-852-182-11 Sony EMCS Co. Published by Kohda TEC
 SPECIFICATIONS

[System] [LCD screen]

Image device: 7.20 mm (1/2.5 type) color CCD, LCD panel: 5.1 cm (2.0 type) TFT drive
Primary color filter Total number of dots: 115 200 (480×240) dots
Total pixel number of camera:
Approx. 7 410 000 pixels [Power, general]
Effective pixel number of camera: Power: LR6 (size AA) Alkaline batteries (2), 3 V
Approx. 7 201 000 pixels HR15/51: HR6 (size AA) Nickel-Metal
Lens: 3× zoom lens f = 5.8 – 17.4 mm (35 – Hydride batteries (2) (not supplied), 2.4 V
105 mm when converted to a 35 mm still ZR6 (size AA) Oxy Nickel Primary Battery
camera) F2.8 ~ 4.8 (2) (not supplied), 3 V
Exposure control: Automatic exposure, Scene AC-LS5K AC Adaptor (not supplied), 4.2 V
Selection (7 modes) Power consumption (during shooting):
White balance: Automatic, Daylight, Cloudy, 1.2 W
Fluorescent, Incandescent, Flash Operating temperature: 0 to 40 °C (32 to 104 °F)
File format (DCF compliant): Storage temperature: –20 to +60 °C (–4 to +140 °F)
Still images: Exif Ver. 2.21 JPEG compliant, Dimensions:
DPOF compatible 91.0×61.0×26.5 mm (3 5/8×2 1/2×1 1/16
Movies: AVI (Motion JPEG) inches) (W/H/D, excluding protrusions)
Recording media: Internal Memory (approx. Mass:
24 MB), “Memory Stick Duo ” Approx. 178 g (6.3 oz) (including two
Flash: Flash range (ISO sensitivity batteries and wrist strap, etc.)
(Recommended Exposure Index) set to Auto): Microphone: Monaural
approx. 0.5 to 3.5 m (19 3/4 inches to 137 7/8 Buzzer
inches) (W)/approx. 0.5 to 2.0 m (19 3/4 Exif Print: Compatible
inches to 78 3/4 inches) (T) PRINT Image Matching III: Compatible
PictBridge: Compatible
[Input and Output connectors]
(USB)•A/V OUT terminal: Design and specifications are subject to change
Video, Audio (Monaural), USB without notice.
communication
USB communication:
Full-Speed USB (USB 2.0 compliant)

DSC-S650
—2—
 CAUTION
Danger of explosion if battery is incorrectly replaced.
Replace only with the same or equivalent type.

SAFETY-RELATED COMPONENT WARNING!! ATTENTION AU COMPOSANT AYANT RAPPORT

À LA SÉCURITÉ!
COMPONENTS IDENTIFIED BY MARK 0 OR DOTTED LINE WITH LES COMPOSANTS IDENTIFÉS PAR UNE MARQUE 0 SUR LES
MARK 0 ON THE SCHEMATIC DIAGRAMS AND IN THE PARTS DIAGRAMMES SCHÉMATIQUES ET LA LISTE DES PIÈCES SONT
LIST ARE CRITICAL TO SAFE OPERATION. REPLACE THESE CRITIQUES POUR LA SÉCURITÉ DE FONCTIONNEMENT. NE
COMPONENTS WITH SONY PARTS WHOSE PART NUMBERS REMPLACER CES COMPOSANTS QUE PAR DES PIÈSES SONY
APPEAR AS SHOWN IN THIS MANUAL OR IN SUPPLEMENTS DONT LES NUMÉROS SONT DONNÉS DANS CE MANUEL OU
PUBLISHED BY SONY. DANS LES SUPPÉMENTS PUBLIÉS PAR SONY.

SAFETY CHECK-OUT

After correcting the original service problem, perform the following

safety checks before releasing the set to the customer.

1. Check the area of your repair for unsoldered or poorly-soldered Unleaded solder
connections. Check the entire board surface for solder splashes Boards requiring use of unleaded solder are printed with the lead-
and bridges. free mark (LF) indicating the solder contains no lead.
2. Check the interboard wiring to ensure that no wires are (Caution: Some printed circuit boards may not come printed with
the lead free mark due to their particular size.)
"pinched" or contact high-wattage resistors.
3. Look for unauthorized replacement parts, particularly
transistors, that were installed during a previous repair. Point : LEAD FREE MARK
them out to the customer and recommend their replacement. Unleaded solder has the following characteristics.
4. Look for parts which, through functioning, show obvious signs • Unleaded solder melts at a temperature about 40°C higher than
of deterioration. Point them out to the customer and ordinary solder.
recommend their replacement. Ordinary soldering irons can be used but the iron tip has to be
applied to the solder joint for a slightly longer time.
5. Check the B+ voltage to see it is at the values specified.
Soldering irons using a temperature regulator should be set to
6. FLEXIBLE Circuit Board Repairing about 350°C.
• Keep the temperature of the soldering iron around 270°C Caution: The printed pattern (copper foil) may peel away if the
during repairing. heated tip is applied for too long, so be careful!
• Do not touch the soldering iron on the same conductor of the • Strong viscosity
circuit board (within 3 times). Unleaded solder is more viscous (sticky, less prone to flow) than
• Be careful not to apply force on the conductor when soldering ordinary solder so use caution not to let solder bridges occur such
or unsoldering. as on IC pins, etc.
• Usable with ordinary solder
It is best to use only unleaded solder but unleaded solder may
also be added to ordinary solder.
DSC-S650
—3—
 TABLE OF CONTENTS
Section Title Page
1. SERVICE NOTE
1-1. Process After Fixing Flash Error ····································· 1-1
1-2. Method for Copying or Erasing the Data in Internal
Memory ··········································································· 1-1

2. DISASSEMBLY
2-1. Disassembly ····································································· 2-1

3. BLOCK DIAGRAMS
3-1. Overall Block Diagram ··················································· 3-1
3-2. Power Block Diagram ····················································· 3-2

4. REPAIR PARTS LIST

4-1. Exploded Views ······························································· 4-1
4-1-1. Overall Section ······························································ 4-1
4-1-2. Front Block ··································································· 4-2
4-1-3. Main Frame Block ························································ 4-3
4-2. Accessories ······································································ 4-4

DSC-S650
—4—
 1. SERVICE NOTE
1-1. PROCESS AFTER FIXING FLASH ERROR
Method for Initializing the Flash Error

Initialize

Initializes the setting to the default setting.

1 Select [OK] with v on the control button, then press z.
The message “Initialize all settings Ready?” appears.
2 Select [OK] with v, then press z.
The settings are reset to the default setting.

To cancel the resetting

Select [Cancel] in step 1 or 2, then press z.

• Make sure that the power is not disconnected during resetting.

1-2. METHOD FOR COPYING OR ERASING THE DATA IN INTERNAL MEMORY

The data can be copied/erased by the operations on the Setup screen. (When erasing the data, execute formatting the internal memory.)

Note: When replacing the camera, erase the data in internal memory of the board before replacement.

Method for Copying the Data in Internal Memory

Copy

Copies all images in the internal memory to a “Memory Stick Duo”.

1 Insert a “Memory Stick Duo” having 32 MB or larger capacity.

2 Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be copied Ready?” appears.
3 Select [OK] with v, then press z.
Copying starts.

To cancel the copying

Select [Cancel] in step 2 or 3, then press z.

• Use batteries with enough capacity or the AC Adaptor (not supplied). If you attempt to copy image files
using batteries with little remaining charge, the batteries may run out, causing copying to fail or possibly
corrupting the data.
• You cannot copy individual images.
• The original images in the internal memory are retained even after copying. To delete the contents of the
internal memory, remove the “Memory Stick Duo” after copying, then execute the [Format] command in
(Internal Memory Tool) (page 48).
• When you copy the data in the internal Memory to the “Memory Stick Duo”, all the data will be copied.
You cannot choose a specific folder on the “Memory Stick Duo” as the destination for the data to be
copied.
• Even if you copy data, a (Print order) mark is not copied.

Method for Formatting the Internal Memory

This item does not appear when a “Memory Stick Duo” is inserted in the camera.

Format

Formats the internal memory.

• Note that formatting irrevocably erases all data in the internal memory, including even protected images.
1 Select [OK] with v on the control button, then press z.
The message “All data in internal memory will be erased Ready?” appears.
2 Select [OK] with v, then press z.
The format is complete.

To cancel the formatting

Select [Cancel] in step 1 or 2, then press z.

DSC-S650
1-1
 2. DISASSEMBLY
The following flow chart shows the disassembly procedure.
2-1. DISASSEMBLY
5 1

2 1
Front Section
(See Page 2-2)
4

1 Open the Battery Cover

3
3
2 Screw TP1.4 × 2.5 2
1 3
1 Screw TP1.4 × 3
3 Screw TP1.7 × 3
2 Screw TP1.4 × 2.5
4 Middle Cover (Right)
3 Screw TP1.7 × 4.5 4
5 Middle Cover (Left) Assy
4 Screw TP1.7 × 3

1 3
1
2

1
1 Screw TP1.4 × 2.5

2 Frame, SW

3 SW Board, Complete

4 Cabinet (Rear) Assy

DSC-S650
2-1
Ver 1.1 2007.02

2. DISASSEMBLY
(From 2-1 Page) 5
4

1
1
2

1
3 Shorting jig
(1k Ω / 1W)
1
Caution
1 3
2

1 Screw TP1.4 × 3
1 Screw TP1.7 × 3
2 Screw TP1.4 × 2.5
2 LCD Block Assy
3 Screw TP1.7 × 16

4 Cabinet Upper Block Assy

5 Cabinet Front Assy

3 1
4
1

2 3 2
2
1 Lens Assy

2 Screw TP1.4 × 3 1
1 Screw TP1.7 × 3 4
3 Strap Bracket 2
2 Screw TP1.4 × 2.5
4 Screw TP1.4 × 2.5
3 ST Board, Complete
5 Battery Cover 6
4 Screw TP1.7 × 3 4
6 Main Frame Assy 5
4

DSC-S650
2-2
 3. BLOCK DIAGRAMS
3-1. OVERALL BLOCK DIAGRAM

LCD DSP
CDS
+5VM
+5VM +3.3V PXCLK
LCD 2.0 +3.3V
LCD_EN
PXCLK
HD
HD
VD
PXCLK
HD
INCH LCD_EN
LCD_MCLK
LCD_MCLK
LCD_VD
LCD_EN
LCD_MCLK CDS_EN
VD CDS_EN
SCLK
VD
CDS_EN +3.3V
+3.3V

PANEL
LCD_VD LCD_HD LCD_VD SCLK SDATA SCLK -7.5V
LCD_HD LCD_SCLK LCD_HD SDATA AFERST SDATA -7.5V
LCD_SCLK LCD_SDATA LCD_SCLK AFERST TG_EN AFERST +13.4V
LCD_SDATA LCD[0..7] LCD_SDATA TG_EN VSUB_Con1 TG_EN +13.4V
LCD[0..7] MLCD_ON LCD[0..7] VSUB_Con1 VSUB_Con2 VSUB_Con1 DGND
MLCD_ON BL MLCD_ON VSUB_Con2 CCD_ON VSUB_Con2 DGND
LCD_BACKLIGHT BL BL CCD_ON CCD_ON
TG_ON
DGND TG_ON CDS_ON TG_ON
DGND CDS_ON CCD[0..11] CDS_ON
1 2
RED CCD[0..11] CCD[0..11]
LCD

CDS

2 1
MEMORY

DDR DGND
+3.1VD DGND
MS_ON +3.1VD
MS_ON R/B MS_ON
RAMD[0..15] R/B MS_INS# R/B
RAMD[0..15] RAMA[0..14] RAMD[0..15] MS_INS# CLE MS_INS#
RAMA[0..14] RAMLDM RAMA[0..14] CLE WE CLE
+2.5VD RAMLDM RAMWE_N RAMLDM WE WP WE
+2.5VD RAMWE_N RAMCAS RAMWE_N WP ALE WP
RAMCAS RAMRAS RAMCAS ALE CE0 ALE
DGND RAMRAS RAMCS_N RAMRAS CE0 RE CE0
DGND RAMCS_N RAMLDQS RAMCS_N RE MS_CLK RE
RAMLDQS RAMUDQS RAMLDQS MS_CLK MD[0..7] MS_CLK
RAMUDQS RAMUDM RAMUDQS MD[0..7] FA23 MD[0..7]
RAMUDM RAMCLK_N RAMUDM FA23 FA20 FA23
VP RAMCLK_N RAMCLK RAMCLK_N FA20 FA22 FA20
2 4 1 2
P1,P2
RAMCLK RAMCLK_EN RAMCLK FA22 FA21 FA22
STROBE_Chg RAMCLK_EN RAMREF RAMCLK_EN FA21 UGND2 FA21
STROBE_Trg
1 S NC
RAMREF RAMREF UGND2
Charge_c +13.4V
FLASH_RDY 3
MEMORY
DDR
1 3 BEEPER
BEEPER
ST_LED
LENS
1 2
GREEN ZOOM SENSOR
+3.1VD
2

FLASH LENS_PS +3.1VD

LENS_PS SHUTTER_M1 LENS_PS
SHUTTER_M1 SHUTTER_M1 ZOOM MOTOR
SHUTTER_M0
FLASH_VP SHUTTER_M0 IRIS_M1 SHUTTER_M0
FLASH_VP FLASH_RDY IRIS_M1 IRIS_M0 IRIS_M1
FLASH_RDY FLASH_RDY IRIS_M0 IRIS_M0 FOCUS SENSOR
+5VM FLASH_CHG_L ZOOM_M1
+5VM FLASH_CHG_L STROBE_TRG FLASH_CHG_L ZOOM_M1 ZOOM_M0 ZOOM_M1
+3.1VD STROBE_TRG STROBE_CHG STROBE_TRG ZOOM_M0 FOCUS_M1 ZOOM_M0
+3.1VD STROBE_CHG STROBE_CHG FOCUS_M1 FOCUS_M1 FOCUS MOTOR
AF_LED FOCUS_M0
DGND AF_LED STROBE_PWR AF_LED FOCUS_M0 LENS_EN FOCUS_M0
DGND STROBE_PWR STROBE_PWR LENS_EN LENS_SCLK LENS_EN
LENS_SCLK LENS_SCLK IRIS MOTOR
LENS_SDATA
FLASH LENS_SDATA ZOOM_PI LENS_SDATA
ZOOM_PI ZOOM_PR ZOOM_PI
ZOOM_PR ZOOM_PR SHUTTER MOTOR
FOCUS_PI
FOCUS_PI +5VM FOCUS_PI
DGND +5VM
DGND

LENS
PWR_ON
PWR_ON PWRKEY
PWRKEY BAT_LOAD
BAT_LOAD JACK

D+ +13.6V
D+ D- D+ +13.6V
D- USB_DET D- +3.1VD
SW USB_DET USB_DET +3.1VD
PC
AV_DET
+3.1VD STA_LED AV_DET VIDEO_OUT A/V_DET DGND
1 2
+3.1VD STA_LED STA_LED VIDEO_OUT LINE_OUT VIDEO_OUT DGND
GREEN
DGND LINE_OUT BEEPER LINE_OUT UGND
DGND SW_KEY_ADC BEEPER BEEPER UGND
UGND2 SW_KEY_ADC SW_KEY_ADC
UGND2
JACK
SW

2
5
2 1
SW_PLAYBACK
SW_PLAYBACK

2
5
POWER

4
6
CCD_ON1 SW_WIDE

2
5
VP CCD_ON1 CCD_ON1 SW_WIDE
VP PWR_CTRL TOP

4
6
-7.5V PWR_CTRL PWR_CTRL SW_TELE
-7.5V VP SW_TELE PWR_KEY

4
6
+2.5VD VP MODE_R5 PWR_KEY
+2.5VD +1.8VD MODE_R5 MODE_R4 MODE_R5
1 2
+3.3V +1.8VD MODE_R4 MODE_R4
GREEN
+3.3V +3.1VD MODE_R2
+3.1VD +3.1VD MODE_R2 MODE_R1 MODE_R2
+3.1VD +3.3VS MODE_R1 MODE_R0 MODE_R1
+5VM +3.3VS MODE_R0 SHUT1 MODE_R0
+5VM +3.3V SHUT1 SHUT2 SHUT1
+13.4V CCD_ON +3.3V SHUT2 PW_LED SHUT2 MODE_R0 ~R5
+13.4V CCD_ON +2.5VD PW_LED DGND PW_LED
+2.5VD DGND
MIC_N

+1.8VD DGND 32.768KHz +3.1VD SHUT1,2

+1.8VD DGND DGND +3.1VD +3.1VD
MIC

DGND
1
4

POWER DSP TOP

4
2
3

Power
1 3
Out GND_3
2
GND_2

BATT+1

Q17 MIC1
1 8 SPM0204HD5
4 5 MIC4_4.72X3.76_173
2 7 G2412-0039-00
3 6
1000PK_25V_X7R
1

1
0.1UK_16V_X5R

AO8803
1000PK_25V_X7R

1 2 G2013-0081-00
SOP8_0.65_9
1 2

1 2
1

F1 BATT- 1
1.6A/32V R131
*10K
G2112-1002-00
2

R0402
1 2

F2
0.8A/24V

DSC-S650
3-1
 3. BLOCK DIAGRAMS
3-2. POWER BLOCK DIAGRAM
BATT+

BATT-
+13.4V

MCU BOARD

Q17
1 8
4 5
2 7
3 6
F1
1.6A/32V AO8803
STROBE BOARD 1 2 G2013-0081-00
SOP8_0.65_9 +5VM
4 2 FLASH_VP 1 2

1
CCD BOARD
P1,P2

NC S 1 F2 R131
VDD 0.8A/24V *10K
3 G2112-1002-00

2
1

47UF +2.5VD +2.5VD R0402

VDDQ

1
2

3 1

2
U2 BUFFER

2
22UF 0.1UF

1
Q2 +13.4V +13V_CCD VCC
+5VM 10UF X 4 0.01UF X 7 1000PF X 3

1
VCC IN
2

1
2.2UK 0.01UK 2.2UK 2.2UK 1000PF

2
1UF 10UK 4.7UK 0.01UK

2
+1.8VD 0.1UF
2

2
2

1
2

2
VDD
22UF 0.1UF -7.5V -7.5V_CCD
1 2 VL

1
BULE +3.1VD

1
0.01UK

2
4.7UK U1

2
10UF 0.1UF

2
+5VM +3.3V

1
2

2
22UF
TOP BOARD 22UF

1
1 2
BULE +13V_VD VH
+3.1VD +3.1VD

1
2
4.7UK 0.1UK
+3.1VD 22UF

2
PVCC +5VM

1
1

VCC -7.5V_VD VL
1

1
VM1 47UF 0.1UF X 4 C107 PVDD DVDD AVDD
#4.7UK_25V 0.1UK
2

VM2

2
VM3

+3.1VD +3.3V +3.1V TG

AFPIV

2
1

10UF 1UF X 2 0.1UF X 2

0.1UF X 4 +3.3VS +2.5VD +1.8VD

1
2

1
ZPIV
10UF X 2 1000PF X 2 0.1UF X 2
2

2
+3.3V +3.1V
ZPRCO
LCD 2.0 INCH

2
PANEL
1UF
VDDPWR VDDDDR VDDPLL 0.01UF X 4

1
VDDUSBPLL +3.1VD
VDDCORE VDDP
1

1
VDDDAC 1000PF X 2
VDDUSB +3.3V +3.1V CDS
VDDSPKR 10UF X 2 0.1UF X 2
2

VDDADC 2

2
VDDAUO
1UF 0.1UF
LED anode

1
U11
+3.3V +3.1VL

1
PVDD
0.1UF 4.7UF AVDD
LDO VCC

2
+3.3V +3.1V LCD_BACKLIGHT

2
1UF FB 1 2
RED

1
+3.1VD VCC

3
10UF 0.1UF X 2 BL 1 2 2 Q12

1 1
*1K
2
*3.3K
Q13

1
+3.1VD VCC2 *27.4
SW

2
1

1
2 10UF 0.1UF X 2

SW BOARD

+3.1VD

1 2
BULE

DSC-S650
3-2
Ver. 1.2 2007.06

4. REPAIR PARTS LIST

4-1. EXPLODED VIEWS
4-1-1. OVERALL SECTION

Rear Block
(See page 4-3.)
4

4
11 13
1
13
4 3 13
12
14
1 13 5

13
Main Frame Block
(See page 4-2.) 3

8
9 (Note 1)

2 6

10

7
5

(Note 1) The adjustment is not required after replacing the LCD

block assembly.

Ref. No. Part No. Description Ref. No. Part No. Description
1 3-113-001-01 SCREW TP1.4*2.5 8 A-1249-952-A LCD BLOCK ASSY (Note1)
2 3-113-005-01 SCREW TP1.7*3 9 3-106-991-01 MIDDLE COVER (RIGHT)
3 3-209-039-01 SCREW TP1.7*16 10 X-2177-476-1 CABINET (FRONT) ASSY
4 3-113-002-01 SCREW TP1.4*3 11 A-1249-951-A CABINET (UPPER) BLOCK ASSY
5 3-273-595-01 SCREW TP1.7*4.5 12 X-2177-477-1 MIDDLE COVER (LEFT) ASSY

6 3-106-992-01 LID, JK 13 3-209-036-01 SCREW TP1.7*3

7 3-106-990-01 LID, BT 14 3-209-038-01 SCREW TP1.4*2.5

DSC-S650
4-1
 4. REPAIR PARTS LIST
4-1-2. FRONT BLOCK
ns: not supplied

55

53
53

52 (Note 2) 53
53

51
55
53

54

54
54
ns
(Note 1) ns
(Note 1)

ns
(Note 1)

(Note 1) In case of the lens assembly, main board, or main frame

assembly failure, contact your local Sony Service
Headquarter for the measures.

(Note 2) The adjustment is not required after replacing the ST block

assembly.

• Refer to cover for mark 0.

Ref. No. Part No. Description

51 3-106-993-01 BRACKET, STRAP
0 52 A-1249-950-A ST BLOCK ASSY (Note 2)
53 3-209-036-01 SCREW TP1.7*3
54 3-113-002-01 SCREW TP1.4*3
55 3-209-038-01 SCREW TP1.4*2.5

DSC-S650
4-2
 4. REPAIR PARTS LIST
4-1-3. MAIN FRAME BLOCK

104

101

101
103

101 102

101

Ref. No. Part No. Description

101 3-209-038-01 SCREW TP1.4*2.5
102 3-106-994-01 FRAME, SW
103 A-1249-953-A FLEXIBLE BLOCK ASSY,SW
104 X-2177-478-1 CABINET (REAR) ASSY

DSC-S650
4-3
Ver. 1.2 2007.06

4. REPAIR PARTS LIST

4-2. ACCESSORIES

Checking supplied accessories.

Note 1: This item is supplied with the unit as an accessory,

but is not prepared as a service part.
A/V cable
3-196-980-01

LR6 (size AA) Alkaline Battery

(Note 1)

USB cable
3-196-981-01

GB

DSC-S650

For details on the advanced operations, please access

“Cyber-shot Handbook” contained on the supplied
CD-ROM via a computer.

Operating Instructions
Before operating the unit, please read this manual thoroughly, and retain it for future reference.

Owner’s Record
The model and serial numbers are located on the bottom. Record the serial number in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding this product.
Model No. DSC-S650
Serial No. ___________________________

Wrist strap © 2007 S ony Corporat ion 2-897-955-11(1)

2-050-981-01
Instruction Manual
2-897-955-12 (ENGLISH) (CND, AEP, UK, E, HK, AUS, JE)
2-897-955-22 (FRENCH, ITALIAN) (AEP, CND)
2-897-955-32 (SPANISH, PORTUGUESE) (AEP, E)
2-897-955-42 (GERMAN, DUTCH) (AEP)
2-897-955-52 (TRADITIONAL CHINESE, SIMPLIFIED CHINESE) (E, CH, HK)
CD-ROM 2-897-955-62 (RUSSIAN) (AEP)
(Cyber-shot Application Software, 2-897-955-72 (ARABIC, PERSIAN) (E)
handbook “Cyber-shot Handbook”) 2-897-955-82 (KOREAN) (KR, JE)
2-897-942-01 (EXCEPT US) 2-897-955-92 (CZECH, POLISH) (AEP)
2-897-943-01 (US) 2-897-956-12 (HUNGARIAN, SLOVAK) (AEP)
2-897-956-22 (SWEDISH, FINNISH) (AEP)
2-897-956-32 (DANISH, NORWEGIAN) (AEP)
2-897-956-42 (THAI, MALAYSIAN) (E)
2-897-956-52 (TURKISH, GREEK) (AEP)
2-897-956-62 (ENGLISH, SPANISH) (US)

CLICK!

Table of contents

Basic Operations

Using the menu

Using the Setup screen

DSC-S650/S700 Viewing images on a TV

Before operating the unit, please read this screen
Handbook and “Instruction Manual”
thoroughly, and retain it for future reference.
Using your computer

Printing still images

Troubleshooting

Others

Index

© 2007 S ony Corporat ion 2-897-945-11(1) GB

Cyber-shot Handbook (PDF) (Note 2)

(not supplied with DSC-S650)
2-897-945-11 (ENGLISH) 2-897-954-11 (FINNISH)
2-897-945-21 (FRENCH) 2-897-954-21 (NORWEGIAN)
2-897-945-31 (ITALIAN) 2-897-954-31 (DANISH)
2-897-945-41 (SPANISH) 2-897-954-41 (THAI)
2-897-945-51 (PORTUGUESE) 2-897-954-51 (MALAYSIAN)
2-897-945-61 (GERMAN) 2-897-954-61 (TURKISH)
2-897-945-71 (DUTCH) 2-897-954-71 (GREEK)
2-897-945-81 (TRADITIONAL CHINESE)
2-897-945-91 (SIMPLIFIED CHINESE)
2-897-953-11 (RUSSIAN) Note 2: Handbooks (PDF) of each language are included in
2-897-953-21 (ARABIC) CD-ROM (Cyber-shot Application Software).
2-897-953-31 (PERSIAN)
2-897-953-41 (KOREAN)
2-897-953-51 (POLISH)
2-897-953-61 (CZECH)
2-897-953-71 (HUNGARIAN)
2-897-953-81 (SLOVAK)
2-897-953-91 (SWEDISH)

DSC-S650
4-4
[Regarding Fuse]

• MCU BOARD

Ref. No : F1
MANUFACTURER: KAMAYA ELECTRIC CO.,LTD.
TYPE: FCC16 162AD
RATING: 1.6A

Ref. No : F2
MANUFACTURER: KAMAYA ELECTRIC CO.,LTD.
TYPE: FCC10 801AD
RATING: 800mA
[Description of main button functions on toolbar of the Adobe Acrobat Reader Ver5.0 (for Windows)]

Toolbar

Printing a text Reversing the screens displayed once

1. Click the Print button . • To reverse the previous screens (operation) one by one, click
2. Specify a printer, print range, number of copies, and other op- the .
tions, and then click [OK]. • To advance the reversed screens (operation) one by one, click
the .
Application of printing:
To set a range to be printed within a page, select the graphic
Application to the Service Manual:
selection tool and drag on the page to enclose a range to
This function allows you to go and back between circuit dia-
be printed, and then click the Print button. gram and printed circuit board diagram, and accordingly it
will be convenient for the voltage check.

Finding a text
1. Click the Find button . Moving with link
2. Enter a character string to be found into a text box, and click
the [Find]. (Specify the find options as necessary) 1. Select either palm tool , zoom tool , text selection tool
, or graphic selection tool .
Application to the Service Manual: 2. Place the pointer in the position in a text where the link exists
To execute “find” from current page toward the previous pages, (such as a button on cover and the table of contents page, or
select the check box “Find Backward” and then click the blue characters on the removal flowchart page or drawing
“Find”. page), and the pointer will change to the forefinger form .
3. Then, click the link. (You will go to the link destination.)

Moving with bookmark:

Click an item (text) on the bookmark pallet, and you can move
to the link destination. Also, clicking can display the
hidden items.
(To go back to original state, click )
3. Open the find dialog box again, and click the [Find Again] and
you can find the matched character strings displayed next.
(Character strings entered previously are displayed as they are
in the text box.)

Application to the Service Manual:

The parts on the drawing pages (block diagrams, circuit dia-
grams, printed circuit boards) and parts list pages in a text
can be found using this find function. For example, find a
Ref. No. of IC on the block diagram, and click the [Find Again]
continuously, so that you can move to the Ref. No. of IC on Zooming or rotating the screen display
the circuit diagram or printed circuit board diagram succes- “Zoom in/out”
sively. • Click the triangle button in the zoom control box to select the
Note: The find function may not be applied to the Service display magnification. Or, you may click or for zoom-
Manual depending on the date of issue.
ing in or out.

Switching a page
• To move to the first page, click the .
• To move to the last page, click the . “Rotate”
• To move to the previous page, click the . • Click rotate tool , and the page then rotates 90 degrees each.

• To move to the next page, click the .

Application to the Service Manual:
The printed circuit board diagram you see now can be changed
to the same direction as the set.
 Reverse 985218213.pdf

Revision History

S.M. Rev.
Ver. Date History Contents
issued
1.0 2007.01 Official Release — —
1.1 2007.02 Correction-1 • Correction of DISASSEMBLY Yes
(C1) S.M. Correction : Page 2-2
1.2 2007.06 Correction-2 • Correction of EXPLODED VIEWS Yes
(C2) • Change of part number for Instruction
Manual
S.M. Correction : Page 4-1, 4-4

DSC-S650