NPI

Sales Training
Linear Heat
Detection
(LHD)

GE job title/2
2
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Outline

• Product Line Overview

• Product Features & Benefits
– Digital Linear Heat detection
– Analogue Linear Heat detection
• Sales Proposition to Installers & End-Users
• Road Map
• Support & Services

GE job title/3
3
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Product Line Overview

GE job title/4
4
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Digital and Analogue Sensor Cable
Linear Heat Detection:
… is a cable that is sensitive to heat and used to trigger an over temperature alarm

Two technologies for different applications:

• Digital sensor cable for a selection of fixed temperature ranges
• Analogue sensor cable for quick response with programmable pre-alarm and alarm options

Digital Analogue
Fixed Temperature Programmable Temperature (on-site)
One cable = one alarm temperature e.g. One cable = many alarm temperatures
68°C/155°F or 240°C/468°F 54°C/129°F to 100°C/212°F

Non-resettable Resettable (up-to 125°C/257°F)

After alarm replace affected section No need to replace after alarm

Can locate the alarm point

No alarm point location
Optional APDL to display length along
Not possible to locate alarm point
sensor cable to alarm point
Maximum zone length / sensor cable Maximum zone length / sensor cable
length length
3000m / 10,000ft 500m / 1,640ft

GE job title/5
5
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Applications

Cable tunnels and cable trays

High power cable installations at power
stations, airport terminals, railway
stations and any installations having
substantial power requirements can be
protected by sensor cable

Floating roof tanks

The petrochemical industry requires
that tank fires caused by the ignition of
combustible gases are extinguished
ASAP. A rim seal sensor cable system
provides a fast extinguishant response

GE job title/6
6
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Applications

Conveyors
Overheating bearings on conveyor support
rollers is a common cause of conveyor belt
fires. Sensor cable can detect these overheat
conditions. Additional protection can be
provided above and below the conveyor belt
against spillage and the transportation of
ignited material

Escalators
Sensor cable provides for the total protection
of escalators with coverage provided at all
potential fire risk areas e.g. drive motors,
return roller bearings, dust collection trays
and truss rollers. Sensor cable can be used
to give an alarm indication or even initiate a
sprinkler system

GE job title/7
7
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Applications

Car Parks
Combustible materials used in the
manufacture of modern passenger vehicles
results in fires that burn more intensely and
generate higher temperatures than ever
before. Early detection of these fire
conditions is essential in enclosed over- and
underground car parks. Sensor cable
d d
installed at the ceiling can detect significant 1 2

rises in temperature not just at localised “hot

spots”, but over the entire length of cable

Vehicles
• Engine locomotives
• Engine bays of earth moving machines
• Heavy goods vehicles

GE job title/8
8
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Applications

Bulk Storage/
Warehouses
Sensor cable “in rack“ protection at
multiple levels ensures rapid fire
detection. As part of a pre-action sprinkler
system, an advance warning of imminent
sprinkler operation may avoid
unnecessary water damage to stored
goods

Refrigeration plants,
freezer and
refrigeration rooms
• May be installed on the shelves

GE job title/9
9
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Features & Benefits

GE job title/10
10
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Key Features & Associated Benefits

Used mainly for special applications, and it is treated just like an electrical
cable…

• Increasing the capabilities of any fire detection system

• Rugged, reliable applications and solutions
• Maintenance free
• Can be installed in inaccessible places because of electrical and mechanical
flexibility
• Detection at the point of risk
• Hazardous area (intrinsically safe) solutions with standard barriers
• Specific fixed or programmable alarm point temperatures
• Ideal for outdoor and high ambient temperature environments with continuous
operation in the most adverse environmental conditions
• Connects via a series resistor to any conventional fire zone or addressable IO
unit (ZMU or supervised input units)

GE job title/11
11
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Key Features & Associated Benefits

Sensor Cable Protection Application

Interior applications, general area coverage
where sensor cable is unlikely to be subjected
PVC
to physical damage or exposed to harsh
environmental conditions

Chemical/UV protection, exterior applications

Nylon where it may be subjected to sunlight and even
some chemicals.

Increased chemical protection in caustic

Polypropylene
environments

Chemical/UV protection, exterior applications

Fluoropolymer where additional chemical protection is
required in more caustic environments

Increased mechanical protection for cables

Stainless Steel & PVC
which could possibly suffer physical damage

Chemical/UV and mechanical protection for

Stainless Steel & Nylon applications where the sensor cable could be
subject to physical damage

GE job title/12
12
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Key Features & Associated Benefits

Outer sheath material

Chemical
PVC Nylon Polypropylene

Ammonia, liquid   

Butane   
Copper nitrate  
Fuel oils   
Gasoline   
Hydrofluoric acid   
Kerosene   
Diesel fuel   
Acetic acid   

GE job title/13
13
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Digital Linear Heat Detection - Overview

Typical Installation:
• Used with a conventional or addressable CIE
• Optional distance location unit for displaying the
distance to an alarm
CIE
• Optional leader cable Conventional
Zone

Optional

Alarm Point
250 mtrs / 820 ft

GE job title/14
14
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Digital Linear Heat Detection - Overview

Alarm point distance locator:

Exclusively for use with Alarmline II Digital Linear Heat Detection cables, the ADLCU is
designed to interface between a CIE and the sensing cable.

• Alternating metres/feet display of alarm point

• Cable selection with leader cable calibration
• Detection of alarm point from 100m – 3000m (300ft – 10,000 ft)
• Installation settings saved in event of power loss
• IP65/IK08 rated enclosure for indoor/outdoor use with 4 sizes of M knock-outs
• Simple installation and operation
• Backlit 16x2 character LCD display
• Continued correct operation of fire alarm control/releasing panel or addressable
module regardless of faults which may occur in the unit such as loss of power.

GE job title/15
15
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Available Options – Digital Sensor Cable

Protection Type

PVC Nylon Polypropylene

Alarm Cable 100m 500m 1000m 100m 500m 1000m 100m 500m 1000m
/m
temp. Length 328ft 1640ft 3281ft 328ft 1640ft 3281ft 328ft 1640ft 3281ft

68°C
155°F
AD68          

88°C
191°F
AD88          

105°C
221°F
AD105         

185°C
365°F
AD185   

240°C 1-D5387-227
464°F

GE job title/16
16
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Available Options – Digital Sensor Cable

Protection Type

Stainless Steel & Stainless Steel &

Fluoropolymer
PVC Nylon
Alarm Cable 100m 200m 500m 1000m 100m 500m 1000m 100m 500m 1000m
temp. Length 328ft 656ft 1640ft 3281ft 328ft 1640ft 3281ft 328ft 1640ft 3281ft

68°C
155°F
AD68  

88°C
191°F
AD88  

105°C
221°F
AD105  

185°C
365°F
AD185  

240°C
464°F
1-D5387-227    

GE job title/17
17
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Analogue Linear Heat Detection -
Overview
Typical Installation:
• Used with a conventional or addressable CIE with
simple relay interface
• Optional leader cable between sensor cable and
controller Approved
Power Supply

GE job title/18
18
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Key Features and Associated Benefits

Analogue technology offers separate Pre-Alarm and Alarm outputs in order to maximise functionality,
coupled with open and short circuit detection and discrimination. Ambient temperature compensation
maintains alarm temperature accuracy

Self-Programmable Controller (AACUSP) Laptop Programmable Controller (AACULP)

Completely self-contained unit or programmable by laptop Requires PC/laptop to program & service

Anyone can carry out maintenance and commissioning Only those with software can do maintenance and
procedure commissioning
Cable resistance, alarm threshold resistance and sensor Comprehensive diagnostics on the PC
cable temperature on diagnostics display. (e.g. module temperature)
Laptop software can be upgraded to add additional
Upgrade to self-programmable module difficult to carry out in
functionality
the field.
(e.g. maintenance log)

Upgrade to self-programmable module not supported

GE job title/19
19
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Available Options – Analogue Sensor
Cable
Protection Type

PVC Nylon Polypropylene

Cable 100m 500m 1000m 100m 500m 1000m 100m 500m 1000m
Length 328ft 1640ft 3281ft 328ft 1640ft 3281ft 328ft 1640ft 3281ft

AA      

Stainless Steel & Stainless Steel &

Fluoropolymer
PVC Nylon
Cable 100m 200m 500m 1000m 100m 500m 1000m 100m 500m 1000m
Length 328ft 656ft 1640ft 3281ft 328ft 1640ft 3281ft 328ft 1640ft 3281ft

AA    

GE job title/20
20
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Sensor Cable Fixings & Accessories

• A complete range of sensor cable

fixings to protect and insulate the
sensor cable from the point of risk
- attach to walls, ceiling, cable
trays or shelves

• Sensor cable accessories, tie

wraps, cradles

• Junction boxes and cable glands

for standard and special
applications

GE job title/21
21
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Sensor Cable Fixing Brackets
“Pipe” Clip with sleeve (“7”-bracket 60mm) (Product range: ACA-B7)

• Designed to utilise existing pipework running through the protected area

• Designed to fit any pipe diameter

• Should be fitted to the underside of the pipe and secured in place using
cable ties or strapping (not supplied with the clip)

• The hole at the end of the clip allows for securing the sensor cable using a
sleeve and cable tie (not supplied with the clip), or to add a distance piece
(“I”-bracket) to extend the position of the sensor cable

• Without extending the sensor cable will be supported approx. 60mm/2.4”

below the pipe

• Recommended spacing: 1m/3.28ft

• Supplied in:
• Zintec or Stainless steel
• Packs of 25 or 100

GE job title/22
22
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Sensor Cable Fixing Brackets
Distance Piece (“I”-bracket) (Product range
ACA-BI)
• Used stand alone or with other clips or
brackets to extend the positioning of the
cable
• The sensor cable is secured using a
sleeve (not supplied with the bracket) and
cable tie (not supplied with the bracket)
• Recommended spacing: 1m/3.28ft

• Supplied in:
• Zintec or stainless steel
• 200mm/7.9" lengths
• Packs of 25 or 100

GE job title/23
23
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Sensor Cable Fixing Brackets
“L”-bracket with sleeve (Product range: ACA-
BL)
• Designed to support sensor cable above
the risk area e.g. the top run of a cable tray
• The sensor cable is secured using a sleeve
and cable tie (not supplied with the bracket)
• Recommended spacing: 1m/3.28ft

• Supplied in:
• Zintec or stainless steel
• 50mm/2”, 100mm/3.9” or 200mm/7.9"
lengths
• Packs of 25 or 100

GE job title/24
24
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Sensor Cable Fixing Brackets
Channel Bracket with sleeve (“U”-bracket) (Product
range: ACA-BU)

• Designed to secure sensor cable to metal

surfaces where there is no return edge available
to fix a bracket or clip e.g. fixed roof storage
tanks

• Secured using a two part anchoring system

• The sensor cable is secured using a sleeve and

cable tie (not supplied with the bracket)

• Recommended spacing: 1m/3.28ft

• Supplied in:
• Zintec or stainless steel
• 60mm/2.4” spacing
• Packs of 25 or 100

GE job title/25
25
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Sensor Cable Fixing Brackets
“V”- bracket with sleeve (Product range: ACA-BV)

• For installing sensor cables in Admiralty cable tray installations

• For multiple layers of cable trays it can be fixed to the underside

of a cable tray supporting the sensor cable protecting the lower
cable tray

• Designed to fit into the existing slots in the tray itself making it
quick and easy to install

• The sensor cable is located in the V channel which is

approximately 60mm/2.4” below the tray

• The sensor cable is secured using a sleeve and cable tie (not
supplied with the bracket)

• Recommended spacing: 1m/3.28ft

• Supplied in:
• Stainless steel
• Packs of 25 or 100

GE job title/26
26
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Sensor Cable Fixing Clips
“Edge” Clip (Product range: ACA-CE)

• To fix sensor cable to metal structures such as girders, steel sections, angle
bars, floating roof storage tank rim seals, foam dams etc.

• The knock on clip is available to mount on steelwork of differing thickness

and provides a stand-off for the sensor cable ensuring rapid response

• Excellent resistance to corrosion and heat

• The sensor cable should be secured to the clip with a sleeve and tie wrap
(not supplied with the clip)

• A fixing hole in the clip allows the securing of the sensor cable although it
can also allow the fixing of a distance piece (“I”-bracket) to extend the
position of the sensor cable

• Recommended spacing: 1m / 3.28ft

• Supplied in:
• Spring steel
• Varying clip thicknesses (2-3mm (1/16"), 3-8mm (2/16"), 8-14mm (5/16"),
14-20mm (9/16")
• Packs of 25 or 100

GE job title/27
27
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Sensor Cable Fixing Clips
“P”-clip with sleeve (Product range: ACA-CP)

• Supplied with sleeve insulator that insulates the cable

from the metal clip and protects it against damage
when tightened

• Fixing hole for easy mounting

• Provides insulation from electrical earth which is often

needed for stainless steel sheath sensor cable

• May be used together with “edge” clip, “L”-bracket,

channel bracket (“U”-bracket) and distance piece (“I”-
bracket)

• Recommended spacing: 1m/3.28ft

• Supplied in:
• Aluminium or stainless steel
• Packs of 25 or 100

GE job title/28
28
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Sensor Cable Fixing Clips
HCA603 / 1-B6782-004
“T” Clip, Plastic

• For ceiling or wall applications suitable for drilling i.e. wood and
concrete

• The clip has a plastic moulding with a slot into which the sensor
cable is located

• For extra security a cable tie (not supplied with the clip) may be
used in a figure “8” arrangement to prevent the sensor cable
from being pulled from the clip

• The clip may be secured with a 6mm/0.24” screw and wall plug
or may be screwed on to an M6 thread on a percussion pin

• Not recommended for use with stainless steel sensing cable

• Recommended spacing: 1m/3.28ft

GE job title/29
29
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Sensor Cable Accessories

ACA-JBW Junction Box

• For any LHD cable joints

• Allows electrical connection for any

LHD cable joints i.e. leader cable to
LHD cable, LHD cable to LHD cable

• IP65/66 weatherproof rating for in and

outdoor applications

• Supplied with cable glands and

connection terminals
GE job title/30
30
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Sensor Cable Accessories

1-B6782-189
GRP EExe Junction Box, 1 x M25
& 1 x M20 Glands for Tank Top
(Hawkes PL612)

• Mounted on the top of the floating

roof storage tank

• Allows electrical connection from

the site cabling to the retractable
cable

GE job title/31
31
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Sensor Cable Accessories

1-B6782-190
GRP EExe Junction Box, 3 x M20
Glands for Tank Roof (Hawkes
PL612)

• Mounted on the roof of the floating

roof storage tank

• Allows electrical connection

between the retractable cable and
sensor cable

GE job title/32
32
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Sensor Cable Accessories

Silicone Cable Sleeve (Product range ACA-RS)

• A silicone split sleeve used to protect

sensor cable from being crushed or
damaged when attached to fixing clips

• Acts as insulator to prevent the transfer of

heat through metal clips

• Fire and UV resistant

• Supplied in:
• Packs of 25 or 100

GE job title/33
33
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Sensor Cable Accessories

Cable ties (Tie wraps) (Product range:

ACA-TW)
• Secure sensor cable to fixing clips
and brackets

• Supplied in:
• PA66 (110°C/230°F) / ETFE (170°C/
338°F) / Stainless steel (tool not
included)
• Packs of 25 or 100

GE job title/34
34
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Sensor Cable Accessories

ACA-TWT Stainless steel tie wrap

tool

• For use with ACA-TWSS stainless

steel cable ties

GE job title/35
35
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Sensor Cable Accessories

1-B6782-170
Retractable Cable, Coiled, Length
30m (98')

• Designed to provide electrical

connection from tank roof to tank top
on floating roof tanks

• Reduces the risk of cable being

caught or snapped during the normal
rising and falling movement of the
tank roof

GE job title/36
36
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Sensor Cable Accessories

1-B6782-032
Retractable Cable Collector, Stainless Steel

• Designed to be fixed to a floating roof for

collecting retractable cable

• The cable collector rises an falls with the

movement of the roof, uncoiling the cable
when the roof lowers and collecting the
cable when the roof rises

• Supplied with drainage holes

GE job title/37
37
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Sensor Cable Accessories
1-53836-K241EX/1-53836-K247EX
Automatic Cable Reeler ATEX

• Alternative system for retractable cable and cable collector. It is

normally placed on the roof of the tank to ensure electrical
continuity between the sensor cable and the detection system
during the upward and downward movement of the roof.

• Installed on the top rim of tank body. The cable is connected to

a junction box (1-B6782-190) on the tank roof

• The reeler follows the movement of the roof, uncoiling the cable
as the roof lowers, and winding the cable when the roof rises

• Max drop: 25m/82ft

• For hazardous areas, suitable safety barriers are required

• Supplied with:
• EX Polycarbonate or Stainless Steel Junction Box,

GE job title/38
38
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Certification

For the EU, specific class certification is not mandatory yet. Two standards
are currently in development (not expected to be complete in the next 2
years):
• EN54-22 Resettable (analogue) line type heat detectors
• EN54-28 Non resettable (digital) line type heat detectors

For the UL/FM segments certification is required. The Alarmline II portfolio

for certification is as follows:
Digital cable and distance location unit
CE Marked
UL/FM Cross Listing to UTC codes completed
No European Standard
Analogue cable and controllers
CE Marked
UL/FM cross listing to UTC codes in progress - targeted for completion Q4 2015
prEN54:22 Approval in progress at VdS - targeted for completion Q1 2016

GE job title/39
39
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
How To order
Digital Linear Heat Cable
68°C/155°F 88°C/191°F

AD68-0100 (100m/328ft) Alarmline II Digital LHD Cable 68°C/155°F PVC AD88-0100 (100m/328ft) Alarmline II Digital LHD Cable 88°C/191°F PVC

AD68-0500 (500m/1640ft) Alarmline II Digital LHD Cable 68°C/155°F PVC AD88-0500 (500m/1640ft) Alarmline II Digital LHD Cable 88°C/191°F PVC

AD68-1000 (1000m/3281ft) Alarmline II Digital LHD Cable 68°C/155°F PVC AD88-1000 (1000m/3281ft) Alarmline II Digital LHD Cable 88°C/191°F PVC

AD68N-0100 (100m/328ft) Alarmline II Digital LHD Cable 68°C/155°F Nylon AD88N-0100 (100m/328ft) Alarmline II Digital LHD Cable 88°C/191°F Nylon

AD68N-0500 (500m/1640ft) Alarmline II Digital LHD Cable 68°C/155°F Nylon AD88N-0500 (500m/1640ft) Alarmline II Digital LHD Cable 88°C/191°F Nylon

AD68N-1000 (1000m/3281ft) Alarmline II Digital LHD Cable 68°C/155°F Nylon AD88N-1000 (1000m/3281ft) Alarmline II Digital LHD Cable 88°C/191°F Nylon

(100m/328ft) Alarmline II Digital LHD Cable 68°C/155°F (100m/328ft) Alarmline II Digital LHD Cable 88°C/191°F
AD68P-0100 AD88P-0100
Polypropylene Polypropylene
(500m/1640ft) Alarmline II Digital LHD Cable 68°C/155°F (500m/1640ft) Alarmline II Digital LHD Cable 88°C/191°F
AD68P-0500 AD88P-0500
Polypropylene Polypropylene
(1000m/3281ft) Alarmline II Digital LHD Cable 68°C/155°F (1000m/3281ft) Alarmline II Digital LHD Cable 88°C/191°F
AD68P-1000 AD88P-1000
Polypropylene Polypropylene

AD68SS-0100 (100m/328ft) Alarmline II Digital LHD Cable 68°C/155°F SS & PVC AD88SS-0100 (100m/328ft) Alarmline II Digital LHD Cable 88°C/191°F SS & PVC

AD68SS-0500 (500m/1640ft) Alarmline II Digital LHD Cable 68°C/155°F SS & PVC AD88SS-0500 (500m/1640ft) Alarmline II Digital LHD Cable 88°C/191°F SS & PVC

GE job title/40
40
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
How To order
Digital Linear Heat Cable
105°C/221°F 185°C/365°F

AD105-0100 (100m/328ft) Alarmline II Digital LHD Cable 105°C/221°F PVC

AD105-0500 (500m/1640ft) Alarmline II Digital LHD Cable 105°C/221°F PVC

AD105-1000 (1000m/3281ft) Alarmline II Digital LHD Cable 105°C/221°F PVC

AD105N-0100 (100m/328ft) Alarmline II Digital LHD Cable 105°C/221°F Nylon AD185N-0100 (100m/328ft) Alarmline II Digital LHD Cable 185°C/365°F Nylon

AD105N-0500 (500m/1640ft) Alarmline II Digital LHD Cable 105°C/221°F Nylon AD185N-0500 (500m/1640ft) Alarmline II Digital LHD Cable 185°C/365°F Nylon

AD105N-1000 (1000m/3281ft) Alarmline II Digital LHD Cable 105°C/221°F Nylon AD185N-1000 (1000m/3281ft) Alarmline II Digital LHD Cable 185°C/365°F Nylon

(100m/328ft) Alarmline II Digital LHD Cable 105°C/221°F

AD105P-0100
Polypropylene
(500m/1640ft) Alarmline II Digital LHD Cable 105°C/221°F
AD105P-0500
Polypropylene
(1000m/3281ft) Alarmline II Digital LHD Cable 105°C/221°F
AD105P-1000
Polypropylene
(100m/328ft) Alarmline II Digital LHD Cable 185°C/365°F SS &
AD105SS-0100 (100m/328ft) Alarmline II Digital LHD Cable 105°C/221°F SS & PVC AD185SS-0100
Nylon
(500m/1640ft) Alarmline II Digital LHD Cable 105°C/221°F SS & (500m/1640ft) Alarmline II Digital LHD Cable 185°C/365°F SS &
AD105SS-0500 AD185SS-0500
PVC Nylon

Digital Linear Heat Alarm Distance Locator

ADLCU Alarmline II Digital LHD Location Control unit

GE job title/41
41
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
How To order
Digital Linear Heat Cable
240°C

1-D5387-227-010 (100m/328ft) Digital LHD Cable 240°C H9650 w/ Drum

1-D5387-227-020 (200m/656ft) Digital LHD Cable 240°C H9650 w/ Drum

1-D5387-227-050 (500m/1640ft) Digital LHD Cable 240°C H9650 w/ Drum

1-D5387-227-100 (1000m/3281ft) Digital LHD Cable 240°C H9650 w/ Drum

Note:
The high temperature cable cannot be used with the ADCLU

GE job title/42
42
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
How to Order
Analogue Linear Heat Cable
AA-0100 (100m/328ft) Alarmline II Analogue LHD Cable PVC

AA-0500 (500m/1640ft) Alarmline II Analogue LHD Cable PVC

AAN-0100 (100m/328ft) Alarmline II Analogue LHD Cable Nylon

AAN-0500 (500m/1640ft) Alarmline II Analogue LHD Cable Nylon

AAP-0100 (100m/328ft) Alarmline II Analogue LHD Cable Polypropylene

AAP-0500 (500m/1640ft) Alarmline II Analogue LHD Cable Polypropylene

AASS-0100 (100m/328ft) Alarmline II Analogue LHD Cable SS & PVC

AASS-0500 (500m/1640ft) Alarmline II Analogue LHD Cable SS & PVC

AASSN-0100 (100m/328ft) Alarmline II Analogue LHD Cable SS & Nylon

AASSN-0500 (500m/1640ft) Alarmline II Analogue LHD Cable SS & Nylon

Analogue Linear Heat Cable Controllers & Software

AACULP Alarmline II Analogue LHD Control Unit - PC Programmable

AACUSP Alarmline II Analogue LHD Control Unit - Self Programmable

AACU-PCC Alarmline II Analogue LHD PC Software w/ USB Cable

GE job title/43
43
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
How to Order (Accessories)
Installation Accessories
Cable Reelers Tie Waps (Cable Ties)

1-53836-K241EX Auto Cable Reeler w/ EX Polycarbonate Junction Box, ATEX ACA-TW11W-025 (25 pack) LHD Cable Accessory - Tie Wrap 110°C (230°F)

1-53836-K247EX Auto Cable Reeler w/ EX Stainless Steel Junction Box, ATEX ACA-TW11W-100 (100 pack) LHD Cable Accessory - Tie Wrap 110°C (230°F)

Retractable Cable ACA-TW17-025 (25 pack) LHD Cable Accessory - Tie Wrap 170°C (338°F)

1-B6782-032 Retractable Cable Collector, Stainless Steel ACA-TW17-100 (100 pack) LHD Cable Accessory - Tie Wrap 170°C (338°F)

1-B6782-170 Retractable Cable, Coiled, Length 30m (98') ACA-TWSS-025 (25 pack) LHD Cable Accessory - Tie Wrap (Stainless Steel)

Junction Boxes ACA-TWSS-100 (100 pack) LHD Cable Accessory - Tie Wrap (Stainless Steel)

ACA-JBW LHD Junction Box, IP65/66 w/ Cable Glands & Terminals Tools

GRP EExe Junction Box, 1 x M25 & 1 x M20 Glands for Tank Top
1-B6782-189 ACA-TWT LHD Stainless Steel Tie Wrap Tool
(Hawkes PL612)
GRP EExe Junction Box, 3 x M20 Glands for Tank Roof (Hawkes
1-B6782-190
PL612)

Sleeves

ACA-RS-025 (25 pack) LHD Cable Accessory - Silicone Sleeve

ACA-RS-100 (100 pack) LHD Cable Accessory - Silicone Sleeve

GE job title/44
44
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
How to Order (Accessories)
Mounting Brackets
“7”-Brackets (Pipe Clips) “L”-Brackets

(25 pack) LHD Cable Accessory - Bracket "7", 60mm (2.4") w/

ACA-B706-025 ACA-BL05-025 (25 pack) LHD Cable Accessory - Bracket "L", 50mm (2") w/ Sleeve
Sleeve
(100 pack) LHD Cable Accessory - Bracket "7", 60mm (2.4") w/ (100 pack) LHD Cable Accessory - Bracket "L", 50mm (2") w/
ACA-B706-100 ACA-BL05-100
Sleeve Sleeve
(25 pack) LHD Cable Accessory - Bracket "7", 60mm (2.4") (25 pack) LHD Cable Accessory - Bracket "L", 50mm (2") (Stainless
ACA-B706SS-025 ACA-BL05SS-025
(Stainless Steel) w/ Sleeve Steel) w/ Sleeve
(100 pack) LHD Cable Accessory - Bracket "7", 60mm (2.4") (100 pack) LHD Cable Accessory - Bracket "L", 50mm (2")
ACA-B706SS-100 ACA-BL05SS-100
(Stainless Steel) w/ Sleeve (Stainless Steel) w/ Sleeve
(25 pack) LHD Cable Accessory - Bracket "L", 100mm (3.9") Dual
“I”-Brackets (Extension Pieces) ACA-BL10-025
Height w/ Sleeve
(25 pack) LHD Cable Accessory - Bracket "I", 200mm (7.9") w/ (100 pack) LHD Cable Accessory - Bracket "L", 100mm (3.9") Dual
ACA-BI20-025 ACA-BL10-100
Sleeve Height w/ Sleeve
(100 pack) LHD Cable Accessory - Bracket "I", 200mm (7.9") w/ (25 pack) LHD Cable Accessory - Bracket "L", 100mm (3.9") Dual
ACA-BI20-100 ACA-BL10SS-025
Sleeve Height (Stainless Steel) w/ Sleeve
(25 pack) LHD Cable Accessory - Bracket "I", 200mm (7.9") (100 pack) LHD Cable Accessory - Bracket "L", 100mm (3.9") Dual
ACA-BI20SS-025 ACA-BL10SS-100
(Stainless Steel) w/ Sleeve Height (Stainless Steel) w/ Sleeve
(100 pack) LHD Cable Accessory - Bracket "I", 200mm (7.9") (25 pack) LHD Cable Accessory - Bracket "L", 200mm (7.9") w/
ACA-BI20SS-100 ACA-BL20-025
(Stainless Steel) w/ Sleeve Sleeve
(100 pack) LHD Cable Accessory - Bracket "L", 200mm (7.9") w/
ACA-BL20-100
Sleeve
(25 pack) LHD Cable Accessory - Bracket "L", 200mm (7.9")
ACA-BL20SS-025
(Stainless Steel) w/ Sleeve
(100 pack) LHD Cable Accessory - Bracket "L", 200mm (7.9")
ACA-BL20SS-100
(Stainless Steel) w/ Sleeve

GE job title/45
45
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
How to Order (Accessories)
Mounting Brackets
“U”-Brackets (Pipe Clips) “V”-Brackets

(25 pack) LHD Cable Accessory - Bracket "U", 60mm (2.4") w/ (25 pack) LHD Cable Accessory - Bracket "V" (Stainless Steel) w/
ACA-BU06-025 ACA-BVSS-025
Sleeve Sleeve
(100 pack) LHD Cable Accessory - Bracket "U", 60mm (2.4") w/ (100 pack) LHD Cable Accessory - Bracket "V" (Stainless Steel) w/
ACA-BU06-100 ACA-BVSS-100
Sleeve Sleeve
(25 pack) LHD Cable Accessory - Bracket "U", 60mm (2.4")
ACA-BU06SS-025
(Stainless Steel) w/ Sleeve
(100 pack) LHD Cable Accessory - Bracket "U", 60mm (2.4")
ACA-BU06SS-100
(Stainless Steel) w/ Sleeve

GE job title/46
46
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
How to Order (Accessories)
Mounting Clips
Edge Clips “P”-Clips

ACA-CE02-025 (25 pack) LHD Cable Accessory - Clip "Edge", 2-3mm (1/16") ACA-CP-025 (25 pack) LHD Cable Accessory - Clip "P" w/ Sleeve

ACA-CE02-100 (100 pack) LHD Cable Accessory - Clip "Edge", 2-3mm (1/16") ACA-CP-100 (100 pack) LHD Cable Accessory - Clip "P" w/ Sleeve

(25 pack) LHD Cable Accessory - Clip "P" (Stainless Steel) w/

ACA-CE03-025 (25 pack) LHD Cable Accessory - Clip "Edge", 3-8mm (2/16") ACA-CPSS-025
Sleeve
(100 pack) LHD Cable Accessory - Clip "P" (Stainless Steel) w/
ACA-CE03-100 (100 pack) LHD Cable Accessory - Clip "Edge", 3-8mm (2/16") ACA-CPSS-100
Sleeve

ACA-CE08-025 (25 pack) LHD Cable Accessory - Clip "Edge", 8-14mm (5/16") “T”-Clips

ACA-CE08-100 (100 pack) LHD Cable Accessory - Clip "Edge", 8-14mm (5/16") 1-B6782-004 LHD T-Clip

ACA-CE14-025 (25 pack) LHD Cable Accessory - Clip "Edge", 14-20mm (9/16")

ACA-CE14-100 (100 pack) LHD Cable Accessory - Clip "Edge", 14-20mm (9/16")

GE job title/47
47
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4
Questions ?

GE job title/48
48
UTC Fire & Security EMEA
UTC internal information - Not for external distribution NPI template – v4