DIGITAL INDICATOR
Image:
Compatible with Strain gage based Full bridge
sensors (Load, Pressure and Torque), Mutual
Induction based LVDT‟s (Displacement).
Programmable Limit Settings.
Configurable decimal position.
Unit selection.
Configurable display update rate.
Remote Inputs & Relay outputs.
Recorder output (Voltage / Current).
Serial communication.
This Digital Indicator is Microcontroller based; it is incorporated with associated support devices,
power supply circuits for down converting the mains supply and distributing the relevant voltages to
respective sections. The front portion of the indicator accommodates the elements such as seven
segments LED for display the measured parameter, Peak & Normal mode selection and Group
number (depending on selected models group number will display). Output Status LED‟s. Key board
assembly consisting of keys such as FUNC, SEL, INC, DEC, RST and TARE. ZERO adjustment
potentiometer for fine tuning the Zero setting when necessary. The Rear portion of the indicator
accommodates all the termination connectors for interfacing with Mains input, Remote inputs,
Sensor input, Relay contacts, Recorder output, RS-232 interface. The users are advised to use on
board 15V DC source at 500mA for interfacing with the external potential free contacts for Remote
input operation. The indicator is packaged in Customized Aluminum / MS enclosure.
Process and industrial weighing (Tank, Hoppers, Analogue Output:
etc.) RS232
Hygienic applications Voltage Output 0-10Vdc or 0-5Vdc or ±10Vdc
Weighbridges Current Output 4-20mA or 0-20mA
Materials Testing
2021
Manufactured in Bangalore, Karnataka, India
http://www.sysconinstruments.com
:
Outputs status LED’s on front panel
Up to 20000, through 7 indication
Display range segment LED display of
height 10 mm
0.5% of ±FSR Relay contact NO, NC, COM
Accuracy configuration
Sensors with gage 230 V AC @ 7 Amps
Compatibility Relay contact rating 36 V DC @ 7 Amps
resistance of 350Ω /
120Ω & LVDT’s
Calibration Factory set Remote inputs Up to 6 Remote Inputs
Keyboard FUNC, SEL, INC, DEC, RST Onboard 15 VDC Yes, For Remote inputs
function and TARE @ 500 mA source only
Group selection As per the selected model AC Fuse 500 mA, Slow blow
(up to 4 Groups)
Group display Yes Operating voltage 230 V AC @ 50Hz
Modes supported Normal / Peak to Peak Power consumption <15 Watts
Comparisons LL - HL , OK - NOTOK and Operating temperature +10 to +50 °C
LL - OK - HL
Resolution Configurable decimal Size 95 * 217 * 317 (H * W * D)
position
Unit selection Yes (without conversion) Weight 4.2 kg approximately
ADC 16 bit , 1 kS/s Enclosure Customized Aluminum/MS
Excitation 10 V DC (-5 & +5) Mains input connector 3 Pin cable, EP 361-3 m
Recorder output Factory set ±5 V, ±10 V Sensor input connector 4 Pin / 5 Pin allied
connector
Current output Factory set based on Remote input connector 9 Pin D type
requirement connector(male )
Serial RS-232 Relay output connector Terminal block
communication
Serial Recorder output BNC connector
9 Pin D type connector (
communication connector
female )
connector
Outputs Potential free up to 3
Model Dynamic Compare Compare Voltage Current AC Group
compare End Peak Version
1154-DX-xXV 1
1154-DX-xGV 4
1154-DX-xXI 1
1154-DX-xGI 4
1154-CE-xXV 1
1154-CE-xGV 4
1154-CE-xXI 1
1154-CE-xGI 4
1154-CP-xXV 1
1154-CP-xGV 4
1154-CP-xXI 1
1154-CP-xGI 4
NOTE: “x” stands for Selected Parameters like Load/Torque/ Pressure/ Displacement indicators.
2021
Manufactured in Bangalore, Karnataka, India
http://www.sysconinstruments.com
No: 45A, plot: AF-3, ECPL – forms, kandasamy Nagar Extn.
Syscon Instruments Private Limited kallarai, Poonamalle - Chennai – 600 056. TEL: + 91
Plot # 66, Electronics City, Phase1, 98400 75062,
Hosur Road, Bangalore 560 100,
Karnataka, INDIA.
Phone: +91 80 28520772 / 3 / 4
Syscon House No: 313-sector-47, Gurgoan – 122 001.
Fax: +91 80 28520775
TEL: +919818723331
marketing@sysconinstruments.com /
info@sysconinstruments.com
2021
Manufactured in Bangalore, Karnataka, India
http://www.sysconinstruments.com
